Re: [PATCH] firewall: Accept traffic on loopback interface if source and destination are within 127.0.0.0/8 only

[Matthias Fischer <matthias.fischer@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 2785 bytes --]

Hi,

sorry, no idea. The only thing I've found is that "squidGuard uses
Squid's [8]standard redirector interface".

*If* 'squidguard' is the culprit here.

Best,
Matthias

On 19.05.2020 15:06, Peter Müller wrote:
> Hello Matthias, hello list,
> 
> why is that traffic passing through the loopback interface?!
> 
> Thanks, and best regards,
> Peter Müller
> 
>> Hi,
>> 
>> perhaps its only me, but after applying this patch for testing purposes
>> I don't see any (redirected) urlfilter block pages anymore.
>> 
>> Only the firewall logs are telling me:
>> 
>> ...
>> REJECT_INPUT lo TCP 192.168.100.254 53464 192.168.100.254 81
>> ...
>> 
>> I had to build a new "Incoming Firewall Access" rule (INPUTFW) allowing
>> TCP traffic from (e.g.) 192.168.100.254/32 to GREEN (192.168.100.254) to
>> TCP port 81 to see a block page again...
>> 
>> Only me?
>> 
>> Best,
>> Matthias
>> 
>> On 14.05.2020 12:36, Michael Tremer wrote:
>>> Hello,
>>>
>>> This is indeed *very* unlikely, but I am okay with this patch being accepted.
>>>
>>> Acked-by: Michael Tremer <michael.tremer(a)ipfire.org>
>>>
>>> Best,
>>> -Michael
>>>
>>>> On 13 May 2020, at 21:21, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>
>>>> This ensures traffic on the loopback interface matches the IPv4
>>>> loopback characteristics (source and destination are within 127.0.0.0/8)
>>>> and prevents any damage in the unlikely case of non-loopback traffic
>>>> being injected/emitted (in)to the loopback interface.
>>>>
>>>> Cc: Arne Fitzenreiter <arne.fitzenreiter(a)ipfire.org>
>>>> Cc: Michael Tremer <michael.tremer(a)ipfire.org>
>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>> ---
>>>> src/initscripts/system/firewall | 6 +++---
>>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/src/initscripts/system/firewall b/src/initscripts/system/firewall
>>>> index 00512d9fa..409aaf7a9 100644
>>>> --- a/src/initscripts/system/firewall
>>>> +++ b/src/initscripts/system/firewall
>>>> @@ -219,10 +219,10 @@ iptables_init() {
>>>> 	iptables -A INPUT -j ICMPINPUT
>>>> 	iptables -A ICMPINPUT -p icmp --icmp-type 8 -j ACCEPT
>>>>
>>>> -	# Accept everything on loopback
>>>> +	# Accept everything on loopback if both source and destination are within 127.0.0.0/8
>>>> 	iptables -N LOOPBACK
>>>> -	iptables -A LOOPBACK -i lo -j ACCEPT
>>>> -	iptables -A LOOPBACK -o lo -j ACCEPT
>>>> +	iptables -A LOOPBACK -i lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT
>>>> +	iptables -A LOOPBACK -o lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT
>>>>
>>>> 	# Filter all packets with loopback addresses on non-loopback interfaces.
>>>> 	iptables -A LOOPBACK -s 127.0.0.0/8 -j DROP
>>>> -- 
>>>> 2.26.1
>>>
>> 
>