Hi,

=> https://bugzilla.ipfire.org/show_bug.cgi?id=12491

Confirmed.

The mean part was
https://git.ipfire.org/?p=ipfire-2.x.git;a=commit;h=5f1039dda984ed3a06da95ba7d9248b759cf9125

MT and Fred found a solution (Thanks!).

The only thing: I'm not quite sure how to integrate a fix deleting the
old directory and file(s) under consideration of the respective client
architecture.

Best,
Matthias

On 11.10.2020 09:52, ummeegge wrote:
> Hi all,
> did a fresh install of Core 150 and updated it to Core 151 testing. By
> calling the OpenVPN WUI i get an internal server error with the
> following error_log entry:
> 
> Can't locate Net/DNS/RR/NXT.pm in @INC (you may need to install the Net::DNS::RR::NXT module) (@INC contains: /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.30.0 /usr/lib/perl5/5.30.0/x86_64-linux-thread-multi /usr/lib/perl5/5.30.0) at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/RR.pm line 86.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/RR.pm line 131.
> Compilation failed in require at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Packet.pm line 15.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Packet.pm line 15.
> Compilation failed in require at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver/Base.pm line 20.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver/Base.pm line 20.
> Compilation failed in require at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver/UNIX.pm line 9.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver/UNIX.pm line 9.
> Compilation failed in require at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver.pm line 19.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS/Resolver.pm line 22.
> Compilation failed in require at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS.pm line 37.
> BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.30.0/x86_64-linux-thread-multi/Net/DNS.pm line 37.
> Compilation failed in require at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 26.
> BEGIN failed--compilation aborted at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 26.
> [Sun Oct 11 09:48:22.546603 2020] [cgid:error] [pid 8658:tid 127223231145536] [client 192.168.75.2:58726] End of script output before headers: ovpnmain.cgi
> 
> 
> So it seems that some perl moduls are missing. Does someone have
> similar problems ?
> 
> Best,
> 
> Erik
> 
> 
> 
> Am Sonntag, den 11.10.2020, 07:27 +0200 schrieb ummeegge:
>> Good morning,
>> 
>> Am Samstag, den 10.10.2020, 12:52 +0100 schrieb Michael Tremer:
>> > Hi,
>> > 
>> > > On 9 Oct 2020, at 21:56, ummeegge <ummeegge(a)ipfire.org> wrote:
>> > > 
>> > > Hi all,
>> > > 
>> > > Am Freitag, den 09.10.2020, 15:26 +0100 schrieb Michael Tremer:
>> > > > Hello,
>> > > > 
>> > > > Could you please open a ticket on BZ for both of them?
>> > > 
>> > > Done --> https://bugzilla.ipfire.org/show_bug.cgi?id=12495 
>> > > https://bugzilla.ipfire.org/show_bug.cgi?id=12494
>> > 
>> > Done and dealt with.
>> 
>> Great.
>> 
>> > 
>> > > apart from that my Prime has been smoked up with a read-only file
>> > > system and is gone into the "Ewige Jagd Gründe" after a reboot
>> > > but
>> > > this
>> > > might have other reasons but further testings/developments are
>> > > currently a little awkward.
>> > 
>> > Software failure?
>> 
>> No the SSD died.
>> 
>> > 
>> > -Michael
>> > 
>> > > Best from shit happens,
>> > > 
>> > > Erik
>> > > 
>> > > 
>> > > > 
>> > > > Best,
>> > > > -Michael
>> > > > 
>> > > > > On 9 Oct 2020, at 12:46, ummeegge <ummeegge(a)ipfire.org>
>> > > > > wrote:
>> > > > > 
>> > > > > Hi all,
>> > > > > i wanted to report a problem with SSH after updating to core
>> > > > > 151
>> > > > > testing.
>> > > > > 
>> > > > > SSH runs regular on port 222 after updating SSH runs on port
>> > > > > 22
>> > > > > and
>> > > > > wasn´t reachable via the old settings. After pressing the
>> > > > > save
>> > > > > button
>> > > > > in SSH section in the WUI everything worked again.
>> > > > > 
>> > > > > May someone else have that too ?
>> > > > > 
>> > > > > Also, /etc/os-release shows
>> > > > > 
>> > > > > PRETTY_NAME="IPFire 2.25 (x86_64) - core145 Development
>> > > > > Build:
>> > > > > master/405c7326"
>> > > > > 
>> > > > > but /var/ipfire/fireinfo/profile shows the correct version
>> > > > > 
>> > > > > "release": "IPFire 2.25 (x86_64) - core151 Development Build:
>> > > > > master/5e4126c3",
>> > > > > 
>> > > > > but apart from that no further problems so far.
>> > > > > 
>> > > > > Best,
>> > > > > 
>> > > > > Erik
>> > > > > 
>> > > > > 
>> > > > > 
>> > > > 
>> > > > 
>> > 
>> > 
>> 
>> 
>