* Lots of kernel errors on /dev/sda right after upgrading to Core104
@ 2016-09-23 16:54 Matthias Fischer
2016-09-23 19:31 ` IT Superhack
0 siblings, 1 reply; 3+ messages in thread
From: Matthias Fischer @ 2016-09-23 16:54 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 3841 bytes --]
Hi list,
I'm experiencing an interesting problem here:
*Exactly* after rebooting after upgrading to Core 104, which worked
without any problems, I find that I got a lot of kernel errors:
...
21:50:22 kernel: REJECT_FORWARD IN=green0 OUT=red0 MAC=00:02:b3:1a:b0:96:00:07:e9:40:b8:29:08:00 SRC=192.168.100.1 DST=192.168.100.254 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=17075 DF PROTO=TCP SPT=50633 DPT=444 WINDOW=8192 RES=0x00 SYN URGP=0
21:50:32 kernel: Kernel logging (proc) stopped.
21:50:32 kernel: Kernel log daemon terminating.
21:52:40 kernel: IPv6: ADDRCONF(NETDEV_UP): green0: link is not ready
21:52:40 kernel: e100 0000:00:03.0 green0: NIC Link is Up 100 Mbps Full Duplex
21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): green0: link becomes ready
21:52:41 kernel: IPv6: ADDRCONF(NETDEV_UP): red0: link is not ready
21:52:41 kernel: e100 0000:00:06.0 red0: NIC Link is Up 100 Mbps Full Duplex
21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): red0: link becomes ready
21:54:01 kernel: perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
21:55:01 kernel: sd 1:0:0:0: [sda]
21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e5 00
21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
21:55:01 kernel: sd 1:0:0:0: [sda]
21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 98 00
...
Profile:
http://fireinfo.ipfire.org/profile/63d7b5d45f8a7816ca68810ed0061d7ff95a9958
Nothing was changed, I tested the drive including cables => no problems:
***SNIP***
root(a)ipfire: / # smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [i686-linux-3.14.79-ipfire-pae] (IPFire 2.19)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: IBM
Product: DDYS-T36950M
Revision: S96H
User Capacity: 36,703,918,080 bytes [36.7 GB]
Logical block size: 512 bytes
Rotation Rate: 10000 rpm
Logical Unit id: 0x5005076707c1df6e
Serial number: 4FY3P734
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Fri Sep 23 18:46:45 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 42 C
Drive Trip Temperature: 85 C
Manufactured in week 46 of year 2001
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 139
Elements in grown defect list: 2
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 3 3 2490.529 0
write: 0 2 0 16 16 1534.193 0
verify: 0 0 0 0 0 73.408 0
Non-medium error count: 0
***SNAP***
What puzzles me is the fact that these errors first *occur right after rebooting with Core104*,
but *never* before, all hardware is running and seems to be ok. No Panic, no crash, nothing,
just these kernel errors since upgrading.
Does anyone have an idea?
Best,
Matthias
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Lots of kernel errors on /dev/sda right after upgrading to Core104
2016-09-23 16:54 Lots of kernel errors on /dev/sda right after upgrading to Core104 Matthias Fischer
@ 2016-09-23 19:31 ` IT Superhack
2016-09-24 5:06 ` Matthias Fischer
0 siblings, 1 reply; 3+ messages in thread
From: IT Superhack @ 2016-09-23 19:31 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4436 bytes --]
Hello Matthias,
there are some complaints about kernel errors in this forum branch:
http://forum.ipfire.org/viewtopic.php?f=17&t=17195&p=100655
Some of them look quite similar to those you encountered.
Personally, I cannot confirm this on my IPFire machine (ARM board
with 32GB SD card), but maybe the error only occurs if a "real" HDD
is in use.
Best regards,
Timmothy Wilson
Matthias Fischer:
> Hi list,
>
> I'm experiencing an interesting problem here:
>
> *Exactly* after rebooting after upgrading to Core 104, which worked
> without any problems, I find that I got a lot of kernel errors:
>
> ...
> 21:50:22 kernel: REJECT_FORWARD IN=green0 OUT=red0 MAC=00:02:b3:1a:b0:96:00:07:e9:40:b8:29:08:00 SRC=192.168.100.1 DST=192.168.100.254 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=17075 DF PROTO=TCP SPT=50633 DPT=444 WINDOW=8192 RES=0x00 SYN URGP=0
> 21:50:32 kernel: Kernel logging (proc) stopped.
> 21:50:32 kernel: Kernel log daemon terminating.
> 21:52:40 kernel: IPv6: ADDRCONF(NETDEV_UP): green0: link is not ready
> 21:52:40 kernel: e100 0000:00:03.0 green0: NIC Link is Up 100 Mbps Full Duplex
> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): green0: link becomes ready
> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_UP): red0: link is not ready
> 21:52:41 kernel: e100 0000:00:06.0 red0: NIC Link is Up 100 Mbps Full Duplex
> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): red0: link becomes ready
> 21:54:01 kernel: perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
> 21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
> 21:55:01 kernel: sd 1:0:0:0: [sda]
> 21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
> 21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
> 21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e5 00
> 21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
> 21:55:01 kernel: sd 1:0:0:0: [sda]
> 21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
> 21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
> 21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 98 00
> ...
>
> Profile:
> http://fireinfo.ipfire.org/profile/63d7b5d45f8a7816ca68810ed0061d7ff95a9958
>
> Nothing was changed, I tested the drive including cables => no problems:
>
> ***SNIP***
> root(a)ipfire: / # smartctl -a /dev/sda
> smartctl 6.5 2016-05-07 r4318 [i686-linux-3.14.79-ipfire-pae] (IPFire 2.19)
> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Vendor: IBM
> Product: DDYS-T36950M
> Revision: S96H
> User Capacity: 36,703,918,080 bytes [36.7 GB]
> Logical block size: 512 bytes
> Rotation Rate: 10000 rpm
> Logical Unit id: 0x5005076707c1df6e
> Serial number: 4FY3P734
> Device type: disk
> Transport protocol: Fibre channel (FCP-2)
> Local Time is: Fri Sep 23 18:46:45 2016 CEST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> Temperature Warning: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART Health Status: OK
>
> Current Drive Temperature: 42 C
> Drive Trip Temperature: 85 C
>
> Manufactured in week 46 of year 2001
> Specified cycle count over device lifetime: 10000
> Accumulated start-stop cycles: 139
> Elements in grown defect list: 2
>
> Error counter log:
> Errors Corrected by Total Correction Gigabytes Total
> ECC rereads/ errors algorithm processed uncorrected
> fast | delayed rewrites corrected invocations [10^9 bytes] errors
> read: 0 0 0 3 3 2490.529 0
> write: 0 2 0 16 16 1534.193 0
> verify: 0 0 0 0 0 73.408 0
>
> Non-medium error count: 0
> ***SNAP***
>
> What puzzles me is the fact that these errors first *occur right after rebooting with Core104*,
> but *never* before, all hardware is running and seems to be ok. No Panic, no crash, nothing,
> just these kernel errors since upgrading.
>
> Does anyone have an idea?
>
> Best,
> Matthias
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Lots of kernel errors on /dev/sda right after upgrading to Core104
2016-09-23 19:31 ` IT Superhack
@ 2016-09-24 5:06 ` Matthias Fischer
0 siblings, 0 replies; 3+ messages in thread
From: Matthias Fischer @ 2016-09-24 5:06 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4826 bytes --]
Hi Timmothy, thanks for the tip! ;-)
I think I found it:
=> https://forum.ipfire.org/viewtopic.php?f=17&t=17195&p=100915#p100914
Bug reported:
https://bugzilla.ipfire.org/show_bug.cgi?id=11192
Best,
Matthias
On 23.09.2016 21:31, IT Superhack wrote:
> Hello Matthias,
>
> there are some complaints about kernel errors in this forum branch:
> http://forum.ipfire.org/viewtopic.php?f=17&t=17195&p=100655
>
> Some of them look quite similar to those you encountered.
>
> Personally, I cannot confirm this on my IPFire machine (ARM board
> with 32GB SD card), but maybe the error only occurs if a "real" HDD
> is in use.
>
> Best regards,
> Timmothy Wilson
>
> Matthias Fischer:
>> Hi list,
>>
>> I'm experiencing an interesting problem here:
>>
>> *Exactly* after rebooting after upgrading to Core 104, which worked
>> without any problems, I find that I got a lot of kernel errors:
>>
>> ...
>> 21:50:22 kernel: REJECT_FORWARD IN=green0 OUT=red0 MAC=00:02:b3:1a:b0:96:00:07:e9:40:b8:29:08:00 SRC=192.168.100.1 DST=192.168.100.254 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=17075 DF PROTO=TCP SPT=50633 DPT=444 WINDOW=8192 RES=0x00 SYN URGP=0
>> 21:50:32 kernel: Kernel logging (proc) stopped.
>> 21:50:32 kernel: Kernel log daemon terminating.
>> 21:52:40 kernel: IPv6: ADDRCONF(NETDEV_UP): green0: link is not ready
>> 21:52:40 kernel: e100 0000:00:03.0 green0: NIC Link is Up 100 Mbps Full Duplex
>> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): green0: link becomes ready
>> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_UP): red0: link is not ready
>> 21:52:41 kernel: e100 0000:00:06.0 red0: NIC Link is Up 100 Mbps Full Duplex
>> 21:52:41 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): red0: link becomes ready
>> 21:54:01 kernel: perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
>> 21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
>> 21:55:01 kernel: sd 1:0:0:0: [sda]
>> 21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
>> 21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
>> 21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 e5 00
>> 21:55:01 kernel: sd 1:0:0:0: [sda] Unhandled error code
>> 21:55:01 kernel: sd 1:0:0:0: [sda]
>> 21:55:01 kernel: Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
>> 21:55:01 kernel: sd 1:0:0:0: [sda] CDB:
>> 21:55:01 kernel: ATA command pass through(16): 85 06 20 00 00 00 00 00 00 00 00 00 00 40 98 00
>> ...
>>
>> Profile:
>> http://fireinfo.ipfire.org/profile/63d7b5d45f8a7816ca68810ed0061d7ff95a9958
>>
>> Nothing was changed, I tested the drive including cables => no problems:
>>
>> ***SNIP***
>> root(a)ipfire: / # smartctl -a /dev/sda
>> smartctl 6.5 2016-05-07 r4318 [i686-linux-3.14.79-ipfire-pae] (IPFire 2.19)
>> Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>>
>> === START OF INFORMATION SECTION ===
>> Vendor: IBM
>> Product: DDYS-T36950M
>> Revision: S96H
>> User Capacity: 36,703,918,080 bytes [36.7 GB]
>> Logical block size: 512 bytes
>> Rotation Rate: 10000 rpm
>> Logical Unit id: 0x5005076707c1df6e
>> Serial number: 4FY3P734
>> Device type: disk
>> Transport protocol: Fibre channel (FCP-2)
>> Local Time is: Fri Sep 23 18:46:45 2016 CEST
>> SMART support is: Available - device has SMART capability.
>> SMART support is: Enabled
>> Temperature Warning: Enabled
>>
>> === START OF READ SMART DATA SECTION ===
>> SMART Health Status: OK
>>
>> Current Drive Temperature: 42 C
>> Drive Trip Temperature: 85 C
>>
>> Manufactured in week 46 of year 2001
>> Specified cycle count over device lifetime: 10000
>> Accumulated start-stop cycles: 139
>> Elements in grown defect list: 2
>>
>> Error counter log:
>> Errors Corrected by Total Correction Gigabytes Total
>> ECC rereads/ errors algorithm processed uncorrected
>> fast | delayed rewrites corrected invocations [10^9 bytes] errors
>> read: 0 0 0 3 3 2490.529 0
>> write: 0 2 0 16 16 1534.193 0
>> verify: 0 0 0 0 0 73.408 0
>>
>> Non-medium error count: 0
>> ***SNAP***
>>
>> What puzzles me is the fact that these errors first *occur right after rebooting with Core104*,
>> but *never* before, all hardware is running and seems to be ok. No Panic, no crash, nothing,
>> just these kernel errors since upgrading.
>>
>> Does anyone have an idea?
>>
>> Best,
>> Matthias
>>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-09-24 5:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-23 16:54 Lots of kernel errors on /dev/sda right after upgrading to Core104 Matthias Fischer
2016-09-23 19:31 ` IT Superhack
2016-09-24 5:06 ` Matthias Fischer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox