Development September 2021

development@lists.ipfire.org

9 participants
91 discussions

[PATCH] monit: Update to 5.29.0
by Matthias Fischer 20 Sep '21

20 Sep '21

For details see: https://mmonit.com/monit/changes/ New: Issue #715: The PostgreSQL protocol test has been improved and now supports authentication with username, password and database when testing connection. Example: if failed port 5432 protocol pgsql username "username" password "12345" database "test" then alert Previous Monit versions used hardcoded credentials when testing connection to postgresql (user=root and database=root). This could trigger thousands of messages like this in the postgresql log: root@root FATAL: password authentication failed for user "root" root@root DETAIL: Role "root" does not exist. Note: Monit will continue to use the hardcoded credentials (for backward compatibility) unless username and password are set. New: Issue #973: You can now test program output using a regular expression. Syntax: IF CONTENT [!]= <regex> THEN action Example: check program disk0_smart with path "/usr/sbin/nvme smart-log /dev/nvme0" if content != "critical_warning[ ]+: 0" then alert New: Issue #974: Monit CLI: Added support for the -g (group) option to the report command. Example: monit -g database report Fixed: Issue #991 (Monit 5.28.1 regression): MacOS: Monit didn't compile on MacOS 10.13 or older. Thanks to Lutz Mader. Fixed: Issue #994 (Monit 5.28.1 regression): The check program statement with every did not work properly. Fixed: Issue #995: Monit start delay was vulnerable to time jumps when Monit is waiting for the delay to pass. Thanks to Daniel Crowe. Fixed: Issue #975: Monit CLI: Monit did not report a warning if -s, -p, -l, -g or -c command-line options were specified multiple times and silently used the last value only. Monit will generate a warning now. Fixed: Issue #972: Monit GUI: The log view had no size limit when reading the Monit log file and could block the browser if the log file was large. Fixed: Issue #955: If more than one every statement is used in a check-service context only the last value is (silently) used. We now report a warning in this case. Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/monit | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lfs/monit b/lfs/monit index 06306eb8f..c01e5bab0 100644 --- a/lfs/monit +++ b/lfs/monit @@ -24,7 +24,7 @@ include Config -VER = 5.28.1 +VER = 5.29.0 THISAPP = monit-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -44,7 +44,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 832783145cbd523bd6bc2c36e0e5c052 +$(DL_FILE)_MD5 = 8a0546d0d52216b22ebd57acc0bb1e03 install : $(TARGET) -- 2.18.0

2 2

[PATCH] monit 5.29.0: Bump forgotten PAK_VER
by Matthias Fischer 20 Sep '21

20 Sep '21

Thanks Adolf! ;-) Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/monit | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lfs/monit b/lfs/monit index c01e5bab0..044fe560f 100644 --- a/lfs/monit +++ b/lfs/monit @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = monit -PAK_VER = 15 +PAK_VER = 16 DEPS = -- 2.18.0

1 0

[PATCH] webinterface: Add links to the configuration wiki
by Leo-Andres Hofmann 20 Sep '21

20 Sep '21

This patch adds a little "help" icon to the page header. If a manual entry exists for a configuration page, the icon appears and offers a quick way to access the wiki. Wiki pages can be configured in the "manualpages" file. Signed-off-by: Leo-Andres Hofmann <hofmann(a)leo-andres.de> --- Hi all, This patch is not yet complete, but I would like to present the idea. What do you think, would this get more people to read the wiki? To test this, move the new file "manualpages" to /var/ipfire/main/ and CTRL+F5 reload the webif to refresh the CSS cache. Still -to do- and where I could use some help: Add "manualpages" file to the updater/installer - how, and should this file be read-only? Collect and match all wiki pages to the CGIs. Kind regards Leo config/cfgroot/general-functions.pl | 18 +++++++++++++++++- config/cfgroot/manualpages | 3 +++ html/html/themes/ipfire/include/css/style.css | 13 +++++++++++++ html/html/themes/ipfire/include/functions.pl | 17 ++++++++++++++++- 4 files changed, 49 insertions(+), 2 deletions(-) create mode 100644 config/cfgroot/manualpages diff --git a/config/cfgroot/general-functions.pl b/config/cfgroot/general-functions.pl index de608e38b..54e23a535 100644 --- a/config/cfgroot/general-functions.pl +++ b/config/cfgroot/general-functions.pl @@ -24,7 +24,9 @@ $|=1; # line buffering $General::version = 'VERSION'; $General::swroot = 'CONFIG_ROOT'; $General::noipprefix = 'noipg-'; -$General::adminmanualurl = 'http://wiki.ipfire.org'; + +# Base URL of the user manual +my $usermanual_base_url = 'https://wiki.ipfire.org'; require "${General::swroot}/network-functions.pl"; @@ -1421,4 +1423,18 @@ sub running_on_gcp() { return 0; } +# Get user manual url for the specified configuration page, returns "" if no entry is configured +sub get_usermanual_url() { + my ($config_page) = @_; + + my %manual_pages = (); + &readhash("${General::swroot}/main/manualpages", \%manual_pages); + + if($config_page && defined($manual_pages{$config_page})) { + return $usermanual_base_url . '/' . $manual_pages{$config_page}; + } + + return ""; +} + 1; diff --git a/config/cfgroot/manualpages b/config/cfgroot/manualpages new file mode 100644 index 000000000..02dac5be6 --- /dev/null +++ b/config/cfgroot/manualpages @@ -0,0 +1,3 @@ +index=configuration/system/startpage +pppsetup=configuration/system/dial +qos=configuration/services/qos diff --git a/html/html/themes/ipfire/include/css/style.css b/html/html/themes/ipfire/include/css/style.css index b92f476c4..661773675 100644 --- a/html/html/themes/ipfire/include/css/style.css +++ b/html/html/themes/ipfire/include/css/style.css @@ -169,6 +169,19 @@ iframe { margin-bottom: 1em; } +#main_header > * { + display: inline-block; + vertical-align: baseline; +} + +#main_header > span { + margin-left: 0.8em; +} + +#main_header img { + padding: 0; +} + #footer { height: 2.5em; margin-bottom: 1em; diff --git a/html/html/themes/ipfire/include/functions.pl b/html/html/themes/ipfire/include/functions.pl index 9f12bbe59..d352a7d96 100644 --- a/html/html/themes/ipfire/include/functions.pl +++ b/html/html/themes/ipfire/include/functions.pl @@ -170,7 +170,22 @@ END print <<END <div class="bigbox fixed"> <div id="main_inner" class="fixed"> - <h1>$title</h1> + <div id="main_header"> + <h1>$title</h1> +END +; + +# Print user manual link +my $manual_url = &General::get_usermanual_url($scriptName); +if($manual_url ne "") { + print <<END + <span><a href="$manual_url" title="$Lang::tr{'online help en'}" target="_blank"><img src="/images/help-browser.png" alt="$Lang::tr{'online help en'}"></a></span> +END +; +} + +print <<END + </div> END ; } -- 2.27.0.windows.1

6 10

[PATCH] sudo: Update to version 1.9.8p1
by Adolf Belka 18 Sep '21

18 Sep '21

- Update from 1.9.7p2 to 1.9.8p1 - Update rootfile - Changelog Major changes between version 1.9.8 and 1.9.8p1: Fixed support for passing a prompt (sudo -p) or a login class (sudo -c) on the command line. This is a regression introduced in sudo 1.9.8. Bug #993. Fixed a crash with sudo ALL rules in the LDAP and SSSD back-ends. This is a regression introduced in sudo 1.9.8. Bug #994. Fixed a compilation error when the --enable-static-sudoers configure option was specified. This is a regression introduced in sudo 1.9.8 caused by a symbol clash with the intercept and log server protobuf functions. Major changes between version 1.9.7p2 and 1.9.8: It is now possible to transparently intercepting sub-commands executed by the original command run via sudo. Intercept support is implemented using LD_PRELOAD (or the equivalent supported by the system) and so has some limitations. The two main limitations are that only dynamic executables are supported and only the execl, execle, execlp, execv, execve, execvp, and execvpe library functions are currently intercepted. Its main use case is to support restricting privileged shells run via sudo. To support this, there is a new intercept Defaults setting and an INTERCEPT command tag that can be used in sudoers. For example: Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh Defaults!SHELLS intercept would cause sudo to run the listed shells in intercept mode. This can also be set on a per-rule basis. For example: Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh chuck ALL = INTERCEPT: SHELLS would only apply intercept mode to user chuck when running one of the listed shells. In intercept mode, sudo will not prompt for a password before running a sub-command and will not allow a set-user-ID or set-group-ID program to be run by default. The new intercept_authenticate and sudoers settings can be used to change this behavior. The new log_subcmds sudoers setting can be used to log commands run in a privileged shell. It uses the same mechanism as the intercept support described above and has the same limitations. Support for logging sudo_logsrvd errors via syslog or to a file. Previously, most sudo_logsrvd errors were only visible in the debug log. Better diagnostics when there is a TLS certificate validation error. Using the += or -= operators in a Defaults setting that takes a string, not a list, now produces a warning from sudo and a syntax error from inside visudo. Fixed a bug where the iolog_mode setting in sudoers and sudo_logsrvd had no effect when creating I/O log parent directories if the I/O log file name ended with the string XXXXXX. Fixed a bug in the sudoers custom prompt code where the size parameter that was passed to the strlcpy() function was incorrect. No overflow was possible since the correct amount of memory was already pre-allocated. The mksigname and mksiglist helper programs are now built with the host compiler, not the target compiler, when cross-compiling. Bug #989. Fixed compilation error when the --enable-static-sudoers configure option was specified. This was due to a typo introduced in sudo 1.9.7. GitHub PR #113 For more details of the changes then view the ChangeLog file in the source tarball or at https://www.sudo.ws/changes.html Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/common/sudo | 2 ++ lfs/sudo | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/config/rootfiles/common/sudo b/config/rootfiles/common/sudo index babdcb484..80e83efa4 100644 --- a/config/rootfiles/common/sudo +++ b/config/rootfiles/common/sudo @@ -18,6 +18,8 @@ usr/lib/sudo/group_file.so usr/lib/sudo/libsudo_util.so.0.0.0 #usr/lib/sudo/sample_approval.la usr/lib/sudo/sample_approval.so +#usr/lib/sudo/sudo_intercept.la +usr/lib/sudo/sudo_intercept.so #usr/lib/sudo/sudo_noexec.la usr/lib/sudo/sudo_noexec.so #usr/lib/sudo/sudoers.la diff --git a/lfs/sudo b/lfs/sudo index a74c34e7e..9fabdfd52 100644 --- a/lfs/sudo +++ b/lfs/sudo @@ -24,7 +24,7 @@ include Config -VER = 1.9.7p2 +VER = 1.9.8p1 THISAPP = sudo-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = d6f8217bfd16649236e100c49e0a7cc4 +$(DL_FILE)_MD5 = ae9c8b32268f27d05bcdcb8f0c04d461 install : $(TARGET) -- 2.33.0

2 1

[PATCH] apache: Update to 2.4.49
by Matthias Fischer 18 Sep '21

18 Sep '21

For details see: https://dlcdn.apache.org//httpd/CHANGES_2.4.49 Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/apache2 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lfs/apache2 b/lfs/apache2 index ff9de7eb7..e63489e8f 100644 --- a/lfs/apache2 +++ b/lfs/apache2 @@ -25,7 +25,7 @@ include Config -VER = 2.4.48 +VER = 2.4.49 THISAPP = httpd-$(VER) DL_FILE = $(THISAPP).tar.bz2 @@ -45,7 +45,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = a7088cec171b0d00bf43394ce64d3909 +$(DL_FILE)_MD5 = f294efbeabcf6027fccc7983a6daa55f install : $(TARGET) -- 2.18.0

2 1

Re: client175
by Adolf Belka 13 Sep '21

13 Sep '21

Hi Arne, On 13/09/2021 10:51, Arne Fitzenreiter wrote: > I have installed it on updated testmachine via pakfire unstable tree (nightly build from next). > The server will not startup so i was bot able to get the webgui at all I installed the client175 .ipfire package onto a Core Update 159 VM machine on my testbed. I was able to get the webgui page shown but I also could not get the program to start. In the /var/log/client175 file there were error messages related to server.py and a couple of modules from cherrypy. These are the error messages:- Traceback (most recent call last): File "/srv/client175/server.py", line 23, in <module> import cherrypy, json, os, pwd, urllib.request, urllib.parse, urllib.error, urllib.request, urllib.error, urllib.parse, sys File "/srv/client175/cherrypy/__init__.py", line 156, in <module> from cherrypy._cperror import HTTPError, HTTPRedirect, InternalRedirect File "/srv/client175/cherrypy/_cperror.py", line 3, in <module> from cgi import escape as _escape ImportError: cannot import name 'escape' from 'cgi' (/usr/lib/python3.8/cgi.py) It wouldn't surprise me if even if these messages were solved there might be further erros in other modules. It looks to me like the client175 python modules are not easily converted by 2to3. I suspect that if client175 is to stay in IPFire then python2 will need to stay to be able to run the existing python2 modules. python2 could be built as an addon dependency so that it is only installed if client175 is selected. Regards, Adolf. > > I will retest this after finishing core160 > > Arne > > > Am 2021-09-12 22:05, schrieb Adolf Belka: >> Hi Arne, >> >> On 12/09/2021 21:41, Adolf Belka wrote: >>> Hi Arne, >>> >>> On 12/09/2021 17:37, Arne Fitzenreiter wrote: >>>> I have tested client175 today. Unfortunately not work at my testsystem. >>>> >>>> It give a lot of errors missing deps of cherrypy and beatifulsoup also some files in root are not converted. >> >> Did you get these errors when you tried to play some music or when the >> client175 cgi page was rendered. >> >> I installed my client175 iso into my VM testbed and was able to see >> the cgi page from client175. I could also get it to show music files >> stored in directories. >> >> I just couldn't get it to test actually playing any music as my >> VirtualBox VM had no audio capability. I am trying to see if I can >> correct that situation now. >> >> >> Regards, >> >> Adolf. >> >>> Interesting because those packages were not required for use before. >>>> Looks like you have missed some files to put folder to create the patch because there are some not python3 syntax. (mpd.py and mpd-proxy.py has print without parenthesis) >>> >>> If you can send me the log messages you got from trying to run client175 I will look at what I need to do to fix this. >>> >>> I will also see if there is any way I can get a sound capability going on my VirtualBox VM testbed so that I can actually test out any following client 175 update before submitting it. >>> >>> Sorry for the problems. >>> >>> I think this confirms that we won't have all the python2 removals completed in Core Update 160. My various fixes will probably need to go into Core Update 161 meaning that the python2 removal will have to go into Core Update 162. >>> >>> Regards, >>> Adolf. >>>> >>>> Arne

1 0

[PATCH v2 1/2] frr: Update to version 8.0.1
by Adolf Belka 13 Sep '21

13 Sep '21

- This v2 version used the frr-8.0.1 source instead of the frr-frr-8.0 source - Update from 6.0 to 8.0.1 - 8.0.1 requires libyang for the build. Introduced with separate patch in this series. - 6.0 is only compilable with python2. python3 compatability was introduced in version 7.4 - Previously confirmed that building frr-8.0 was successful with only python3 available - Added --disable-static to the ./configure options. - Rootfile updated - Changelog from 6.0 to 8.0.1 is too large to include here. It can be viewed to obtain more details at https://github.com/FRRouting/frr/releases Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/frr | 110 ++++++++++++++++++++++++++++------ lfs/frr | 9 +-- 2 files changed, 97 insertions(+), 22 deletions(-) diff --git a/config/rootfiles/packages/frr b/config/rootfiles/packages/frr index 8aafc7c6c..3733e5a1c 100644 --- a/config/rootfiles/packages/frr +++ b/config/rootfiles/packages/frr @@ -1,17 +1,12 @@ -#etc/frr -etc/frr/bgpd.conf.sample -etc/frr/bgpd.conf.sample2 -etc/frr/bgpd.conf.vnc.sample -etc/frr/ospfd.conf.sample -etc/frr/ripngd.conf.sample -etc/frr/staticd.conf.sample -etc/frr/vtysh.conf.sample -etc/frr/zebra.conf.sample etc/rc.d/init.d/frr -usr/bin/bgp_btoa usr/bin/vtysh #usr/include/frr +#usr/include/frr/agg_table.h +#usr/include/frr/assert.h +#usr/include/frr/atomlist.h #usr/include/frr/bfd.h +#usr/include/frr/bfdd +#usr/include/frr/bfdd/bfddp_packet.h #usr/include/frr/bitfield.h #usr/include/frr/buffer.h #usr/include/frr/checksum.h @@ -20,24 +15,29 @@ usr/bin/vtysh #usr/include/frr/command_match.h #usr/include/frr/compiler.h #usr/include/frr/csv.h +#usr/include/frr/db.h #usr/include/frr/debug.h +#usr/include/frr/defaults.h #usr/include/frr/distribute.h #usr/include/frr/eigrpd #usr/include/frr/eigrpd/eigrp_dump.h #usr/include/frr/eigrpd/eigrp_topology.h #usr/include/frr/eigrpd/eigrpd.h -#usr/include/frr/event_counter.h #usr/include/frr/ferr.h -#usr/include/frr/fifo.h #usr/include/frr/filter.h #usr/include/frr/freebsd-queue.h #usr/include/frr/frr_pthread.h #usr/include/frr/frratomic.h +#usr/include/frr/frrcu.h +#usr/include/frr/frrlua.h +#usr/include/frr/frrscript.h #usr/include/frr/frrstr.h #usr/include/frr/getopt.h #usr/include/frr/graph.h #usr/include/frr/hash.h #usr/include/frr/hook.h +#usr/include/frr/iana_afi.h +#usr/include/frr/id_alloc.h #usr/include/frr/if.h #usr/include/frr/if_rmap.h #usr/include/frr/imsg.h @@ -45,21 +45,29 @@ usr/bin/vtysh #usr/include/frr/jhash.h #usr/include/frr/json.h #usr/include/frr/keychain.h +#usr/include/frr/ldp_sync.h #usr/include/frr/lib_errors.h +#usr/include/frr/lib_vty.h #usr/include/frr/libfrr.h +#usr/include/frr/libfrr_trace.h #usr/include/frr/libospf.h +#usr/include/frr/link_state.h #usr/include/frr/linklist.h #usr/include/frr/log.h -#usr/include/frr/logicalrouter.h +#usr/include/frr/log_vty.h #usr/include/frr/md5.h #usr/include/frr/memory.h -#usr/include/frr/memory_vty.h +#usr/include/frr/mlag.h #usr/include/frr/module.h #usr/include/frr/monotime.h #usr/include/frr/mpls.h #usr/include/frr/network.h #usr/include/frr/nexthop.h #usr/include/frr/nexthop_group.h +#usr/include/frr/nexthop_group_private.h +#usr/include/frr/northbound.h +#usr/include/frr/northbound_cli.h +#usr/include/frr/northbound_db.h #usr/include/frr/ns.h #usr/include/frr/openbsd-queue.h #usr/include/frr/openbsd-tree.h @@ -76,29 +84,39 @@ usr/bin/vtysh #usr/include/frr/ospfd/ospfd.h #usr/include/frr/pbr.h #usr/include/frr/plist.h -#usr/include/frr/pqueue.h #usr/include/frr/prefix.h +#usr/include/frr/printfrr.h #usr/include/frr/privs.h #usr/include/frr/ptm_lib.h +#usr/include/frr/pullwr.h #usr/include/frr/pw.h #usr/include/frr/qobj.h #usr/include/frr/queue.h +#usr/include/frr/resolver.h #usr/include/frr/ringbuf.h #usr/include/frr/route_types.h #usr/include/frr/routemap.h +#usr/include/frr/routing_nb.h #usr/include/frr/sbuf.h +#usr/include/frr/seqlock.h #usr/include/frr/sha256.h #usr/include/frr/sigevent.h #usr/include/frr/skiplist.h +#usr/include/frr/smux.h #usr/include/frr/sockopt.h #usr/include/frr/sockunion.h #usr/include/frr/spf_backoff.h #usr/include/frr/srcdest_table.h +#usr/include/frr/srte.h +#usr/include/frr/srv6.h #usr/include/frr/stream.h #usr/include/frr/systemd.h #usr/include/frr/table.h #usr/include/frr/termtable.h #usr/include/frr/thread.h +#usr/include/frr/trace.h +#usr/include/frr/typerb.h +#usr/include/frr/typesafe.h #usr/include/frr/vector.h #usr/include/frr/version.h #usr/include/frr/vlan.h @@ -108,22 +126,78 @@ usr/bin/vtysh #usr/include/frr/vxlan.h #usr/include/frr/wheel.h #usr/include/frr/workqueue.h -#usr/include/frr/zassert.h +#usr/include/frr/xref.h +#usr/include/frr/yang.h +#usr/include/frr/yang_translator.h +#usr/include/frr/yang_wrappers.h #usr/include/frr/zclient.h #usr/include/frr/zebra.h -#usr/lib/libfrr.a +#usr/include/frr/zlog.h +#usr/include/frr/zlog_targets.h +#usr/lib/frr +#usr/lib/frr/modules +#usr/lib/frr/modules/bgpd_bmp.la +#usr/lib/frr/modules/bgpd_bmp.so +#usr/lib/frr/modules/dplane_fpm_nl.la +#usr/lib/frr/modules/dplane_fpm_nl.so +#usr/lib/frr/modules/pathd_pcep.la +#usr/lib/frr/modules/pathd_pcep.so +#usr/lib/frr/modules/zebra_cumulus_mlag.la +#usr/lib/frr/modules/zebra_cumulus_mlag.so #usr/lib/libfrr.la #usr/lib/libfrr.so usr/lib/libfrr.so.0 usr/lib/libfrr.so.0.0.0 +#usr/lib/libfrrcares.la +#usr/lib/libfrrcares.so +usr/lib/libfrrcares.so.0 +usr/lib/libfrrcares.so.0.0.0 usr/sbin/bgpd +usr/sbin/fabricd usr/sbin/frr usr/sbin/frr-reload usr/sbin/frr-reload.py +usr/sbin/frrcommon.sh +usr/sbin/frrinit.sh +usr/sbin/generate_support_bundle.py usr/sbin/ospfd -usr/sbin/rfptest +usr/sbin/pathd usr/sbin/ssd usr/sbin/staticd +usr/sbin/vrrpd usr/sbin/watchfrr +usr/sbin/watchfrr.sh usr/sbin/zebra +#usr/share/yang +#usr/share/yang/frr-bgp-bmp.yang +#usr/share/yang/frr-bgp-common-multiprotocol.yang +#usr/share/yang/frr-bgp-common-structure.yang +#usr/share/yang/frr-bgp-common.yang +#usr/share/yang/frr-bgp-filter.yang +#usr/share/yang/frr-bgp-neighbor.yang +#usr/share/yang/frr-bgp-peer-group.yang +#usr/share/yang/frr-bgp-route-map.yang +#usr/share/yang/frr-bgp-rpki.yang +#usr/share/yang/frr-bgp-types.yang +#usr/share/yang/frr-bgp.yang +#usr/share/yang/frr-deviations-bgp-datacenter.yang +#usr/share/yang/frr-filter.yang +#usr/share/yang/frr-interface.yang +#usr/share/yang/frr-module-translator.yang +#usr/share/yang/frr-nexthop.yang +#usr/share/yang/frr-ospf-route-map.yang +#usr/share/yang/frr-ospf6-route-map.yang +#usr/share/yang/frr-pathd.yang +#usr/share/yang/frr-route-map.yang +#usr/share/yang/frr-route-types.yang +#usr/share/yang/frr-routing.yang +#usr/share/yang/frr-staticd.yang +#usr/share/yang/frr-test-module.yang +#usr/share/yang/frr-vrf.yang +#usr/share/yang/frr-vrrpd.yang +#usr/share/yang/frr-zebra-route-map.yang +#usr/share/yang/frr-zebra.yang +#usr/share/yang/ietf-bgp-types.yang +#usr/share/yang/ietf-interfaces.yang +#usr/share/yang/ietf-routing-types.yang var/ipfire/backup/addons/includes/frr diff --git a/lfs/frr b/lfs/frr index cff23ff92..1af776eb6 100644 --- a/lfs/frr +++ b/lfs/frr @@ -24,7 +24,7 @@ include Config -VER = 6.0 +VER = 8.0.1 THISAPP = frr-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = frr -PAK_VER = 1 +PAK_VER = 2 DEPS = @@ -46,7 +46,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = d725c08e0093f58e5fcac0969c781813 +$(DL_FILE)_MD5 = ef606567993da37ce6f4a8f456f77e24 install : $(TARGET) @@ -101,7 +101,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) --disable-pbrd \ --disable-pimd \ --disable-ripd \ - --disable-ripngd + --disable-ripngd \ + --disable-static cd $(DIR_APP) && make $(MAKETUNING) cd $(DIR_APP) && make install -- 2.33.0

1 1

Re: client175
by Adolf Belka 12 Sep '21

12 Sep '21

Hi Arne, On 12/09/2021 17:37, Arne Fitzenreiter wrote: > I have tested client175 today. Unfortunately not work at my testsystem. > > It give a lot of errors missing deps of cherrypy and beatifulsoup also some files in root are not converted. Interesting because those packages were not required for use before. > Looks like you have missed some files to put folder to create the patch because there are some not python3 syntax. (mpd.py and mpd-proxy.py has print without parenthesis) If you can send me the log messages you got from trying to run client175 I will look at what I need to do to fix this. I will also see if there is any way I can get a sound capability going on my VirtualBox VM testbed so that I can actually test out any following client 175 update before submitting it. Sorry for the problems. I think this confirms that we won't have all the python2 removals completed in Core Update 160. My various fixes will probably need to go into Core Update 161 meaning that the python2 removal will have to go into Core Update 162. Regards, Adolf. > > Arne

1 2

[PATCH 1/2] frr: Update to version 8.0
by Adolf Belka 12 Sep '21

12 Sep '21

- Update from 6.0 to 8.0 - 8.0 requires libyang for the build. Introduced with separate patch in this series. - 6.0 is only compilable with python2. python3 compatability was introduced in version 7.4 - Confirmed that building frr-8.0 worked with only python3 available - Added --disable-static to the ./configure options. - Rootfile updated - Changelog from 6.0 to 8.0 is too large to include here. It can be viewed to obtain more details at https://github.com/FRRouting/frr/releases In version 8.0 there are over 2200 commits from 91 different authors. The frr developers expect to release a bugfix point release relatively soon after this version which was released on 29th July 2021. Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/frr | 110 ++++++++++++++++++++++++++++------ lfs/frr | 14 +++-- 2 files changed, 100 insertions(+), 24 deletions(-) diff --git a/config/rootfiles/packages/frr b/config/rootfiles/packages/frr index 8aafc7c6c..3733e5a1c 100644 --- a/config/rootfiles/packages/frr +++ b/config/rootfiles/packages/frr @@ -1,17 +1,12 @@ -#etc/frr -etc/frr/bgpd.conf.sample -etc/frr/bgpd.conf.sample2 -etc/frr/bgpd.conf.vnc.sample -etc/frr/ospfd.conf.sample -etc/frr/ripngd.conf.sample -etc/frr/staticd.conf.sample -etc/frr/vtysh.conf.sample -etc/frr/zebra.conf.sample etc/rc.d/init.d/frr -usr/bin/bgp_btoa usr/bin/vtysh #usr/include/frr +#usr/include/frr/agg_table.h +#usr/include/frr/assert.h +#usr/include/frr/atomlist.h #usr/include/frr/bfd.h +#usr/include/frr/bfdd +#usr/include/frr/bfdd/bfddp_packet.h #usr/include/frr/bitfield.h #usr/include/frr/buffer.h #usr/include/frr/checksum.h @@ -20,24 +15,29 @@ usr/bin/vtysh #usr/include/frr/command_match.h #usr/include/frr/compiler.h #usr/include/frr/csv.h +#usr/include/frr/db.h #usr/include/frr/debug.h +#usr/include/frr/defaults.h #usr/include/frr/distribute.h #usr/include/frr/eigrpd #usr/include/frr/eigrpd/eigrp_dump.h #usr/include/frr/eigrpd/eigrp_topology.h #usr/include/frr/eigrpd/eigrpd.h -#usr/include/frr/event_counter.h #usr/include/frr/ferr.h -#usr/include/frr/fifo.h #usr/include/frr/filter.h #usr/include/frr/freebsd-queue.h #usr/include/frr/frr_pthread.h #usr/include/frr/frratomic.h +#usr/include/frr/frrcu.h +#usr/include/frr/frrlua.h +#usr/include/frr/frrscript.h #usr/include/frr/frrstr.h #usr/include/frr/getopt.h #usr/include/frr/graph.h #usr/include/frr/hash.h #usr/include/frr/hook.h +#usr/include/frr/iana_afi.h +#usr/include/frr/id_alloc.h #usr/include/frr/if.h #usr/include/frr/if_rmap.h #usr/include/frr/imsg.h @@ -45,21 +45,29 @@ usr/bin/vtysh #usr/include/frr/jhash.h #usr/include/frr/json.h #usr/include/frr/keychain.h +#usr/include/frr/ldp_sync.h #usr/include/frr/lib_errors.h +#usr/include/frr/lib_vty.h #usr/include/frr/libfrr.h +#usr/include/frr/libfrr_trace.h #usr/include/frr/libospf.h +#usr/include/frr/link_state.h #usr/include/frr/linklist.h #usr/include/frr/log.h -#usr/include/frr/logicalrouter.h +#usr/include/frr/log_vty.h #usr/include/frr/md5.h #usr/include/frr/memory.h -#usr/include/frr/memory_vty.h +#usr/include/frr/mlag.h #usr/include/frr/module.h #usr/include/frr/monotime.h #usr/include/frr/mpls.h #usr/include/frr/network.h #usr/include/frr/nexthop.h #usr/include/frr/nexthop_group.h +#usr/include/frr/nexthop_group_private.h +#usr/include/frr/northbound.h +#usr/include/frr/northbound_cli.h +#usr/include/frr/northbound_db.h #usr/include/frr/ns.h #usr/include/frr/openbsd-queue.h #usr/include/frr/openbsd-tree.h @@ -76,29 +84,39 @@ usr/bin/vtysh #usr/include/frr/ospfd/ospfd.h #usr/include/frr/pbr.h #usr/include/frr/plist.h -#usr/include/frr/pqueue.h #usr/include/frr/prefix.h +#usr/include/frr/printfrr.h #usr/include/frr/privs.h #usr/include/frr/ptm_lib.h +#usr/include/frr/pullwr.h #usr/include/frr/pw.h #usr/include/frr/qobj.h #usr/include/frr/queue.h +#usr/include/frr/resolver.h #usr/include/frr/ringbuf.h #usr/include/frr/route_types.h #usr/include/frr/routemap.h +#usr/include/frr/routing_nb.h #usr/include/frr/sbuf.h +#usr/include/frr/seqlock.h #usr/include/frr/sha256.h #usr/include/frr/sigevent.h #usr/include/frr/skiplist.h +#usr/include/frr/smux.h #usr/include/frr/sockopt.h #usr/include/frr/sockunion.h #usr/include/frr/spf_backoff.h #usr/include/frr/srcdest_table.h +#usr/include/frr/srte.h +#usr/include/frr/srv6.h #usr/include/frr/stream.h #usr/include/frr/systemd.h #usr/include/frr/table.h #usr/include/frr/termtable.h #usr/include/frr/thread.h +#usr/include/frr/trace.h +#usr/include/frr/typerb.h +#usr/include/frr/typesafe.h #usr/include/frr/vector.h #usr/include/frr/version.h #usr/include/frr/vlan.h @@ -108,22 +126,78 @@ usr/bin/vtysh #usr/include/frr/vxlan.h #usr/include/frr/wheel.h #usr/include/frr/workqueue.h -#usr/include/frr/zassert.h +#usr/include/frr/xref.h +#usr/include/frr/yang.h +#usr/include/frr/yang_translator.h +#usr/include/frr/yang_wrappers.h #usr/include/frr/zclient.h #usr/include/frr/zebra.h -#usr/lib/libfrr.a +#usr/include/frr/zlog.h +#usr/include/frr/zlog_targets.h +#usr/lib/frr +#usr/lib/frr/modules +#usr/lib/frr/modules/bgpd_bmp.la +#usr/lib/frr/modules/bgpd_bmp.so +#usr/lib/frr/modules/dplane_fpm_nl.la +#usr/lib/frr/modules/dplane_fpm_nl.so +#usr/lib/frr/modules/pathd_pcep.la +#usr/lib/frr/modules/pathd_pcep.so +#usr/lib/frr/modules/zebra_cumulus_mlag.la +#usr/lib/frr/modules/zebra_cumulus_mlag.so #usr/lib/libfrr.la #usr/lib/libfrr.so usr/lib/libfrr.so.0 usr/lib/libfrr.so.0.0.0 +#usr/lib/libfrrcares.la +#usr/lib/libfrrcares.so +usr/lib/libfrrcares.so.0 +usr/lib/libfrrcares.so.0.0.0 usr/sbin/bgpd +usr/sbin/fabricd usr/sbin/frr usr/sbin/frr-reload usr/sbin/frr-reload.py +usr/sbin/frrcommon.sh +usr/sbin/frrinit.sh +usr/sbin/generate_support_bundle.py usr/sbin/ospfd -usr/sbin/rfptest +usr/sbin/pathd usr/sbin/ssd usr/sbin/staticd +usr/sbin/vrrpd usr/sbin/watchfrr +usr/sbin/watchfrr.sh usr/sbin/zebra +#usr/share/yang +#usr/share/yang/frr-bgp-bmp.yang +#usr/share/yang/frr-bgp-common-multiprotocol.yang +#usr/share/yang/frr-bgp-common-structure.yang +#usr/share/yang/frr-bgp-common.yang +#usr/share/yang/frr-bgp-filter.yang +#usr/share/yang/frr-bgp-neighbor.yang +#usr/share/yang/frr-bgp-peer-group.yang +#usr/share/yang/frr-bgp-route-map.yang +#usr/share/yang/frr-bgp-rpki.yang +#usr/share/yang/frr-bgp-types.yang +#usr/share/yang/frr-bgp.yang +#usr/share/yang/frr-deviations-bgp-datacenter.yang +#usr/share/yang/frr-filter.yang +#usr/share/yang/frr-interface.yang +#usr/share/yang/frr-module-translator.yang +#usr/share/yang/frr-nexthop.yang +#usr/share/yang/frr-ospf-route-map.yang +#usr/share/yang/frr-ospf6-route-map.yang +#usr/share/yang/frr-pathd.yang +#usr/share/yang/frr-route-map.yang +#usr/share/yang/frr-route-types.yang +#usr/share/yang/frr-routing.yang +#usr/share/yang/frr-staticd.yang +#usr/share/yang/frr-test-module.yang +#usr/share/yang/frr-vrf.yang +#usr/share/yang/frr-vrrpd.yang +#usr/share/yang/frr-zebra-route-map.yang +#usr/share/yang/frr-zebra.yang +#usr/share/yang/ietf-bgp-types.yang +#usr/share/yang/ietf-interfaces.yang +#usr/share/yang/ietf-routing-types.yang var/ipfire/backup/addons/includes/frr diff --git a/lfs/frr b/lfs/frr index cff23ff92..fa9238947 100644 --- a/lfs/frr +++ b/lfs/frr @@ -24,15 +24,15 @@ include Config -VER = 6.0 +VER = 8.0 -THISAPP = frr-$(VER) -DL_FILE = $(THISAPP).tar.xz +THISAPP = frr-frr-$(VER) +DL_FILE = $(THISAPP).tar.gz DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = frr -PAK_VER = 1 +PAK_VER = 2 DEPS = @@ -46,7 +46,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = d725c08e0093f58e5fcac0969c781813 +$(DL_FILE)_MD5 = 98e008c8cf717b4764827ed527c6e605 install : $(TARGET) @@ -80,6 +80,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) $(UPDATE_AUTOMAKE) + cd $(DIR_APP) && ./bootstrap.sh cd $(DIR_APP) && ./configure \ --prefix=/usr \ --sysconfdir=/etc/frr \ @@ -101,7 +102,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) --disable-pbrd \ --disable-pimd \ --disable-ripd \ - --disable-ripngd + --disable-ripngd \ + --disable-static cd $(DIR_APP) && make $(MAKETUNING) cd $(DIR_APP) && make install -- 2.32.0

4 8

[PATCH] alsa: Disable python to allow working without python2 being present
by Adolf Belka 12 Sep '21

12 Sep '21

- Added --disable-python to ./configure in lfs - Updated rootfile Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/alsa | 100 +++++++++++++++++---------------- lfs/alsa | 16 +++--- 2 files changed, 60 insertions(+), 56 deletions(-) diff --git a/config/rootfiles/packages/alsa b/config/rootfiles/packages/alsa index a704727ec..5f1efc364 100644 --- a/config/rootfiles/packages/alsa +++ b/config/rootfiles/packages/alsa @@ -1,6 +1,7 @@ etc/rc.d/init.d/alsa lib/firmware/aica_firmware.bin #lib/firmware/asihpi +lib/firmware/asihpi/dsp2400.bin lib/firmware/asihpi/dsp5000.bin lib/firmware/asihpi/dsp6200.bin lib/firmware/asihpi/dsp6205.bin @@ -8,15 +9,6 @@ lib/firmware/asihpi/dsp6400.bin lib/firmware/asihpi/dsp6600.bin lib/firmware/asihpi/dsp8700.bin lib/firmware/asihpi/dsp8900.bin -#lib/firmware/cs46xx -lib/firmware/cs46xx/ba1 -lib/firmware/cs46xx/cwc4630 -lib/firmware/cs46xx/cwcasync -lib/firmware/cs46xx/cwcbinhack -lib/firmware/cs46xx/cwcdma -lib/firmware/cs46xx/cwcsnoop -lib/firmware/ctefx-desktop.bin -lib/firmware/ctefx-r3di.bin lib/firmware/digiface_firmware.bin lib/firmware/digiface_firmware_rev11.bin #lib/firmware/ea @@ -105,12 +97,9 @@ lib/firmware/vx/x1_1_vp4.xlx lib/firmware/vx/x1_1_vx2.xlx lib/firmware/vx/x1_1_vxp.xlx lib/firmware/vx/x1_2_v22.xlx -#lib/udev/rules.d/90-alsa-restore.rules usr/bin/aconnect -usr/bin/alsabat usr/bin/alsaloop usr/bin/alsamixer -usr/bin/alsatplg usr/bin/alsaucm usr/bin/amidi usr/bin/amixer @@ -121,19 +110,19 @@ usr/bin/arecordmidi usr/bin/aseqdump usr/bin/aseqnet usr/bin/aserver -usr/bin/axfer usr/bin/iecset usr/bin/speaker-test #usr/include/alsa +#usr/include/alsa/alisp.h #usr/include/alsa/asoundef.h #usr/include/alsa/asoundlib.h #usr/include/alsa/conf.h #usr/include/alsa/control.h #usr/include/alsa/control_external.h -#usr/include/alsa/control_plugin.h #usr/include/alsa/error.h #usr/include/alsa/global.h #usr/include/alsa/hwdep.h +#usr/include/alsa/iatomic.h #usr/include/alsa/input.h #usr/include/alsa/mixer.h #usr/include/alsa/mixer_abst.h @@ -151,39 +140,31 @@ usr/bin/speaker-test #usr/include/alsa/seq_midi_event.h #usr/include/alsa/seqmid.h #usr/include/alsa/sound -#usr/include/alsa/sound/asoc.h #usr/include/alsa/sound/asound_fm.h #usr/include/alsa/sound/emu10k1.h #usr/include/alsa/sound/hdsp.h usr/include/alsa/sound/hdspm.h #usr/include/alsa/sound/sb16_csp.h #usr/include/alsa/sound/sscape_ioctl.h -#usr/include/alsa/sound/tlv.h #usr/include/alsa/sound/type_compat.h -#usr/include/alsa/sound/uapi -#usr/include/alsa/sound/uapi/asoc.h -#usr/include/alsa/sound/uapi/asound_fm.h -#usr/include/alsa/sound/uapi/emu10k1.h -#usr/include/alsa/sound/uapi/hdsp.h -#usr/include/alsa/sound/uapi/hdspm.h -#usr/include/alsa/sound/uapi/sb16_csp.h -#usr/include/alsa/sound/uapi/sscape_ioctl.h -#usr/include/alsa/sound/uapi/tlv.h #usr/include/alsa/timer.h -#usr/include/alsa/topology.h #usr/include/alsa/use-case.h #usr/include/alsa/version.h -#usr/include/asoundlib.h #usr/include/sys/asoundlib.h +#usr/lib/alsa-lib +#usr/lib/alsa-lib/smixer +#usr/lib/alsa-lib/smixer/smixer-ac97.la +usr/lib/alsa-lib/smixer/smixer-ac97.so +#usr/lib/alsa-lib/smixer/smixer-hda.la +usr/lib/alsa-lib/smixer/smixer-hda.so +#usr/lib/alsa-lib/smixer/smixer-python.la +#usr/lib/alsa-lib/smixer/smixer-python.so +#usr/lib/alsa-lib/smixer/smixer-sbase.la +usr/lib/alsa-lib/smixer/smixer-sbase.so #usr/lib/libasound.la #usr/lib/libasound.so usr/lib/libasound.so.2 usr/lib/libasound.so.2.0.0 -#usr/lib/libatopology.la -#usr/lib/libatopology.so -usr/lib/libatopology.so.2 -usr/lib/libatopology.so.2.0.0 -#usr/lib/pkgconfig/alsa-topology.pc #usr/lib/pkgconfig/alsa.pc usr/local/share/alsa #usr/local/share/alsa/firmware @@ -260,13 +241,13 @@ usr/local/share/alsa/firmware/hdsploader/rpm_firmware.bin #usr/local/share/alsa/firmware/vxloader/x1_1_vx2.rbt #usr/local/share/alsa/firmware/vxloader/x1_1_vxp.rbt #usr/local/share/alsa/firmware/vxloader/x1_2_v22.rbt -usr/sbin/alsa-info.sh -usr/sbin/alsabat-test.sh usr/sbin/alsaconf usr/sbin/alsactl #usr/share/aclocal/alsa.m4 usr/share/alsa #usr/share/alsa/alsa.conf +#usr/share/alsa/alsa.conf.d +usr/share/alsa/alsa.conf.d/README #usr/share/alsa/cards #usr/share/alsa/cards/AACI.conf #usr/share/alsa/cards/ATIIXP-MODEM.conf @@ -297,13 +278,11 @@ usr/share/alsa #usr/share/alsa/cards/FireWave.conf #usr/share/alsa/cards/GUS.conf #usr/share/alsa/cards/HDA-Intel.conf -#usr/share/alsa/cards/HdmiLpeAudio.conf #usr/share/alsa/cards/ICE1712.conf #usr/share/alsa/cards/ICE1724.conf #usr/share/alsa/cards/ICH-MODEM.conf #usr/share/alsa/cards/ICH.conf #usr/share/alsa/cards/ICH4.conf -#usr/share/alsa/cards/Loopback.conf #usr/share/alsa/cards/Maestro3.conf #usr/share/alsa/cards/NFORCE.conf #usr/share/alsa/cards/PC-Speaker.conf @@ -313,7 +292,10 @@ usr/share/alsa #usr/share/alsa/cards/RME9636.conf #usr/share/alsa/cards/RME9652.conf #usr/share/alsa/cards/SB-XFi.conf +#usr/share/alsa/cards/SI7018 #usr/share/alsa/cards/SI7018.conf +#usr/share/alsa/cards/SI7018/sndoc-mixer.alisp +#usr/share/alsa/cards/SI7018/sndop-mixer.alisp #usr/share/alsa/cards/TRID4DWAVENX.conf #usr/share/alsa/cards/USB-Audio.conf #usr/share/alsa/cards/VIA686A.conf @@ -324,14 +306,10 @@ usr/share/alsa #usr/share/alsa/cards/VXPocket.conf #usr/share/alsa/cards/VXPocket440.conf #usr/share/alsa/cards/YMF744.conf +#usr/share/alsa/cards/aliases.alisp #usr/share/alsa/cards/aliases.conf -#usr/share/alsa/cards/pistachio-card.conf -#usr/share/alsa/cards/vc4-hdmi.conf -#usr/share/alsa/ctl -#usr/share/alsa/ctl/default.conf #usr/share/alsa/init #usr/share/alsa/init/00main -#usr/share/alsa/init/ca0106 #usr/share/alsa/init/default #usr/share/alsa/init/hda #usr/share/alsa/init/help @@ -349,25 +327,52 @@ usr/share/alsa #usr/share/alsa/pcm/modem.conf #usr/share/alsa/pcm/rear.conf #usr/share/alsa/pcm/side.conf -#usr/share/alsa/pcm/surround21.conf #usr/share/alsa/pcm/surround40.conf #usr/share/alsa/pcm/surround41.conf #usr/share/alsa/pcm/surround50.conf #usr/share/alsa/pcm/surround51.conf #usr/share/alsa/pcm/surround71.conf +#usr/share/alsa/smixer.conf +#usr/share/alsa/sndo-mixer.alisp #usr/share/alsa/speaker-test #usr/share/alsa/speaker-test/sample_map.csv +#usr/share/alsa/ucm +usr/share/alsa/ucm/DAISY-I2S +usr/share/alsa/ucm/DAISY-I2S/DAISY-I2S.conf +usr/share/alsa/ucm/DAISY-I2S/HiFi.conf +#usr/share/alsa/ucm/PandaBoard +usr/share/alsa/ucm/PandaBoard/FMAnalog +usr/share/alsa/ucm/PandaBoard/PandaBoard.conf +usr/share/alsa/ucm/PandaBoard/hifi +usr/share/alsa/ucm/PandaBoard/hifiLP +usr/share/alsa/ucm/PandaBoard/record +usr/share/alsa/ucm/PandaBoard/voice +usr/share/alsa/ucm/PandaBoard/voiceCall +#usr/share/alsa/ucm/PandaBoardES +usr/share/alsa/ucm/PandaBoardES/FMAnalog +usr/share/alsa/ucm/PandaBoardES/PandaBoardES.conf +usr/share/alsa/ucm/PandaBoardES/hifi +usr/share/alsa/ucm/PandaBoardES/hifiLP +usr/share/alsa/ucm/PandaBoardES/record +usr/share/alsa/ucm/PandaBoardES/voice +usr/share/alsa/ucm/PandaBoardES/voiceCall +#usr/share/alsa/ucm/SDP4430 +usr/share/alsa/ucm/SDP4430/FMAnalog +usr/share/alsa/ucm/SDP4430/SDP4430.conf +usr/share/alsa/ucm/SDP4430/hifi +usr/share/alsa/ucm/SDP4430/hifiLP +usr/share/alsa/ucm/SDP4430/record +usr/share/alsa/ucm/SDP4430/voice +usr/share/alsa/ucm/SDP4430/voiceCall +#usr/share/alsa/ucm/tegraalc5632 +usr/share/alsa/ucm/tegraalc5632/tegraalc5632.conf #usr/share/locale/de/LC_MESSAGES/alsa-utils.mo -#usr/share/locale/eu/LC_MESSAGES/alsa-utils.mo #usr/share/locale/fr/LC_MESSAGES/alsa-utils.mo #usr/share/locale/ja/LC_MESSAGES/alsa-utils.mo #usr/share/locale/ja/LC_MESSAGES/alsaconf.mo #usr/share/locale/ru/LC_MESSAGES/alsaconf.mo -#usr/share/locale/sk/LC_MESSAGES/alsa-utils.mo #usr/share/man/fr/man8/alsaconf.8 #usr/share/man/man1/aconnect.1 -#usr/share/man/man1/alsa-info.sh.1 -#usr/share/man/man1/alsabat.1 #usr/share/man/man1/alsactl.1 #usr/share/man/man1/alsaloop.1 #usr/share/man/man1/alsamixer.1 @@ -379,9 +384,6 @@ usr/share/alsa #usr/share/man/man1/arecordmidi.1 #usr/share/man/man1/aseqdump.1 #usr/share/man/man1/aseqnet.1 -#usr/share/man/man1/axfer-list.1 -#usr/share/man/man1/axfer-transfer.1 -#usr/share/man/man1/axfer.1 #usr/share/man/man1/iecset.1 #usr/share/man/man1/speaker-test.1 #usr/share/man/man8/alsaconf.8 diff --git a/lfs/alsa b/lfs/alsa index 264849e11..700afee5b 100644 --- a/lfs/alsa +++ b/lfs/alsa @@ -25,9 +25,9 @@ include Config -VER = 1.2.5.1 -UVER = 1.2.5.1 -FVER = 1.2.4 +VER = 1.0.27.1 +UVER = 1.0.27.1 +FVER = 1.0.27 VERSUFIX = ipfire$(KCFG) @@ -52,9 +52,9 @@ $(DL_FILE) = $(DL_FROM)/$(DL_FILE) alsa-utils-$(UVER).tar.bz2 = $(DL_FROM)/alsa-utils-$(UVER).tar.bz2 alsa-firmware-$(FVER).tar.bz2 = $(DL_FROM)/alsa-firmware-$(FVER).tar.bz2 -$(DL_FILE)_MD5 = c8335793e7828803311edc48fb71662e -alsa-utils-$(UVER).tar.bz2_MD5 = 8f142bebff84ff05438b46a0e896f53a -alsa-firmware-$(FVER).tar.bz2_MD5 = ee6c1d24a1a4ac1d86992b408ed710a2 +$(DL_FILE)_MD5 = 17102aaab10e9d4b19f6b02937bab015 +alsa-utils-$(UVER).tar.bz2_MD5 = 3d81357b997744a139881ef72bc6921a +alsa-firmware-$(FVER).tar.bz2_MD5 = b373b350d5151dd7d64db2fc12936b04 install : $(TARGET) @@ -94,7 +94,9 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) cd $(DIR_APP) && ./configure cd $(DIR_APP) && make $(MAKETUNING) $(EXTRA_MAKE) cd $(DIR_APP) && make install - cd $(DIR_APP)/alsa-utils-$(UVER) && ./configure --disable-xmlto + cd $(DIR_APP)/alsa-utils-$(UVER) && ./configure \ + --disable-xmlto \ + --disable-python cd $(DIR_APP)/alsa-utils-$(UVER) && make $(MAKETUNING) $(EXTRA_MAKE) cd $(DIR_APP)/alsa-utils-$(UVER) && make install cd $(DIR_APP)/alsa-firmware-$(FVER) && ./configure -- 2.33.0

3 3

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development September 2021