Hello Michael,
i have tested it now with Development Build: next/b3acd7b8-dirty of Core 69, in there the new verify perl script is already implemented (also available in the actual download section of Core 68). The script works also fine with Core 69, the connections need to have the hook in the checkbox otherwise no connection will be established. But i can go also for further testes when Core 69 is in the testing section.

Already established  connections canŽt be terminated by clearing off the checkbox but i think this is also not the task of the verify script, in that case after 3600 sec. the new DH key will be exchanged again and so the verify script will prohibit also the connection.

Erik


Am 02.06.2013 um 12:28 schrieb Michael Tremer:

Alright. Good to know that the script itself is working.

The problems seems to be with the update. Could you please recheck if
the script is properly updated with Core Update 69, when it's available
in testing, and still works?!

Thanks,
-Michael

On Fri, 2013-05-31 at 17:48 +0200, embp wrote:
O.K. could solve it with a new installation, so Core 68 was not the
problem cause with the new Core 68 install everything works fine.


Cheers


Erik

Am 30.05.2013 um 11:35 schrieb Erik K.:

Forgot something,
another possible problem could be the installation of the new
firewall 0.9.9.5 and 0.9.9.6, i think there where also some
modifications on ovpnmain.cgi and there were also some problems with
the uninstallation of it. May there are a possible error source too.


Erik



Hi all,
i want to report a problem with OpenVPN. The last significant
changes where the update to Core 68, so i think this problem may
have something to do with this changes but iŽam not sure about the
exact date.
Since free dyndns expires i have tried to enter my IP address to
the "global settings" but an Error occures which tell me something
like
error messages:
Source port in use: 1197


so i have tested some other changes in the global section but the
same error message appears. After enabling the debbugger in
ovpnmain.cgi the httpd error_log gives me the following output.


[Thu May 30 10:15:27 2013] [error] [client 192.168.75.2] [Thu May
30 10:15:27 2013] ovpnmain.cgi: Use of uninitialized value
$cgiparams{"TYPE"} in string eq
at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 962., referer:
https://192.168.75.1:444/cgi-bin/ovpnmain.cgi
[Thu May 30 10:15:27 2013] [error] [client 192.168.75.2] [Thu May
30 10:15:27 2013] ovpnmain.cgi: Use of uninitialized value
$cgiparams{"TYPE"} in string eq
at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 1052., referer:
https://192.168.75.1:444/cgi-bin/ovpnmain.cgi
[Thu May 30 10:15:27 2013] [error] [client 192.168.75.2] [Thu May
30 10:15:27 2013] ovpnmain.cgi: Use of uninitialized value
$cgiparams{"TYPE"} in string eq
at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 1141., referer:
https://192.168.75.1:444/cgi-bin/ovpnmain.cgi
[Thu May 30 10:15:27 2013] [error] [client 192.168.75.2] [Thu May
30 10:15:27 2013] ovpnmain.cgi: Use of uninitialized value
$cgiparams{"KEY"} in string eq
at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 1141., referer:
https://192.168.75.1:444/cgi-bin/ovpnmain.cgi
[Thu May 30 10:15:27 2013] [error] [client 192.168.75.2] [Thu May
30 10:15:27 2013] ovpnmain.cgi: Use of uninitialized value in
concatenation (.) or string
at /srv/web/ipfire/cgi-bin/ovpnmain.cgi line 4853., referer:
https://192.168.75.1:444/cgi-bin/ovpnmain.cgi


so my question does someone have equal problems since Core 68 ?




Greetings




Erik




_______________________________________________
Development mailing list
Development@lists.ipfire.org
http://lists.ipfire.org/mailman/listinfo/development

_______________________________________________
Development mailing list
Development@lists.ipfire.org
http://lists.ipfire.org/mailman/listinfo/development