[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. 3e1145e1a0b1a08bf61d6c4962eeae48e3d0c355
by gitï¼ ipfire.org 05 Nov '14
by gitï¼ ipfire.org 05 Nov '14
05 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via 3e1145e1a0b1a08bf61d6c4962eeae48e3d0c355 (commit)
via 69749af1005aa4a35a63d5daf55f39e4c47554aa (commit)
via 6a91a5a72474b213bdba834175c665b963e12f5a (commit)
from 07686bd7e27e790af69f6c3ad7c5f24298ab4c21 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 3e1145e1a0b1a08bf61d6c4962eeae48e3d0c355
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Wed Nov 5 01:34:27 2014 +0100
installer: Fix download of the ISO image
commit 69749af1005aa4a35a63d5daf55f39e4c47554aa
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Wed Nov 5 01:33:59 2014 +0100
installer: Don't try to install /etc/hosts which does not exist
commit 6a91a5a72474b213bdba834175c665b963e12f5a
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Wed Nov 5 01:33:29 2014 +0100
installer: Show better helpline in unattended mode
-----------------------------------------------------------------------
Summary of changes:
src/installer/downloadsource.sh | 9 ++++++
src/installer/dracut-module/module-setup.sh | 2 +-
src/installer/main.c | 48 +++++++++++++++++++++--------
3 files changed, 46 insertions(+), 13 deletions(-)
Difference in files:
diff --git a/src/installer/downloadsource.sh b/src/installer/downloadsource.sh
index 4a48686..c74f9e2 100644
--- a/src/installer/downloadsource.sh
+++ b/src/installer/downloadsource.sh
@@ -31,6 +31,15 @@ fi
OUTPUT="${1}"
URL="${2}"
+# Mount a tmpfs which is big enough to hold the ISO image
+OUTPUT_DIR="${OUTPUT%/*}"
+
+mkdir -p "${OUTPUT_DIR}"
+if ! mount -t tmpfs none "${OUTPUT_DIR}" -o size=512M; then
+ echo "Could not mount tmpfs to ${OUTPUT_DIR}" >&2
+ exit 1
+fi
+
echo "Downloading ${URL}..."
if ! download -O "${OUTPUT}" "${URL}"; then
echo "Download failed" >&2
diff --git a/src/installer/dracut-module/module-setup.sh b/src/installer/dracut-module/module-setup.sh
index 0173e95..08dcdd5 100755
--- a/src/installer/dracut-module/module-setup.sh
+++ b/src/installer/dracut-module/module-setup.sh
@@ -42,7 +42,7 @@ install() {
inst /var/ipfire/dhcpc/dhcpcd-run-hooks
inst "$moddir/70-dhcpcd.exe" "/var/ipfire/dhcpc/dhcpcd-hooks/70-dhcpcd.exe"
- inst /etc/host.conf /etc/hosts /etc/protocols
+ inst /etc/host.conf /etc/protocols
inst /etc/nsswitch.conf /etc/resolv.conf
inst_libdir_file "libnss_dns.so.*"
diff --git a/src/installer/main.c b/src/installer/main.c
index 9262a40..01a9cc6 100644
--- a/src/installer/main.c
+++ b/src/installer/main.c
@@ -25,7 +25,7 @@
#define INST_FILECOUNT 21000
#define LICENSE_FILE "/cdrom/COPYING"
-#define SOURCE_TEMPFILE "/tmp/downloaded-image.iso"
+#define SOURCE_TEMPFILE "/tmp/downloads/image.iso"
extern char url[STRING_SIZE];
@@ -412,7 +412,13 @@ int main(int argc, char *argv[]) {
setlocale(LC_ALL, language);
}
- char* helpline = center_string(_("<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"), screen_cols);
+ // Set helpline
+ char* helpline = NULL;
+ if (config.unattended)
+ helpline = center_string(_("Unattended mode"), screen_cols);
+ else
+ helpline = center_string(_("<Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"), screen_cols);
+
newtPushHelpLine(helpline);
if (!config.unattended) {
@@ -496,7 +502,7 @@ int main(int argc, char *argv[]) {
FILE* f = fopen(SOURCE_TEMPFILE, "r");
if (f) {
- sourcedrive = SOURCE_TEMPFILE;
+ sourcedrive = strdup(SOURCE_TEMPFILE);
fclose(f);
} else {
char reason[STRING_SIZE] = "-";
@@ -843,6 +849,18 @@ int main(int argc, char *argv[]) {
// Umount source drive and eject
hw_umount(SOURCE_MOUNT_PATH);
+ // Free downloaded ISO image
+ if (strcmp(sourcedrive, SOURCE_TEMPFILE) == 0) {
+ rc = unlink(sourcedrive);
+ if (rc)
+ fprintf(flog, "Could not free downloaded ISO image: %s\n", sourcedrive);
+
+ // or eject real images
+ } else {
+ snprintf(commandstring, STRING_SIZE, "/usr/bin/eject %s", sourcedrive);
+ mysystem(logfile, commandstring);
+ }
+
// Download and execute the postinstall script
if (*config.postinstall) {
snprintf(commandstring, sizeof(commandstring),
@@ -854,9 +872,6 @@ int main(int argc, char *argv[]) {
}
}
- snprintf(commandstring, STRING_SIZE, "/usr/bin/eject %s", sourcedrive);
- mysystem(logfile, commandstring);
-
if (!config.unattended) {
snprintf(message, sizeof(message), _(
"%s was successfully installed!\n\n"
@@ -880,19 +895,28 @@ EXIT:
newtFinished();
// Free resources
- free(system_release);
- free(roottext);
- free(helpline);
+ if (system_release)
+ free(system_release);
+
+ if (roottext)
+ free(roottext);
+
+ if (helpline)
+ free(helpline);
+
+ if (sourcedrive)
+ free(sourcedrive);
- free(sourcedrive);
- free(destination);
+ if (destination)
+ free(destination);
hw_stop_all_raid_arrays(logfile);
if (selected_disks)
hw_free_disks(selected_disks);
- hw_free(hw);
+ if (hw)
+ hw_free(hw);
fcloseall();
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. 07686bd7e27e790af69f6c3ad7c5f24298ab4c21
by gitï¼ ipfire.org 04 Nov '14
by gitï¼ ipfire.org 04 Nov '14
04 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via 07686bd7e27e790af69f6c3ad7c5f24298ab4c21 (commit)
via bfb421f1bb70ab1a2fbd0839a7d1fc37a472ed45 (commit)
via c172d453c1e7962d0b1741640b0c030d21fab449 (commit)
from dc3de45125581d78a5aaa8055b6516fc4a152c79 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 07686bd7e27e790af69f6c3ad7c5f24298ab4c21
Merge: bfb421f dc3de45
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Tue Nov 4 23:52:28 2014 +0100
Merge remote-tracking branch 'origin/seventeen' into seventeen
commit bfb421f1bb70ab1a2fbd0839a7d1fc37a472ed45
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Tue Nov 4 23:52:02 2014 +0100
fireinfo: Import latest fixes for ARM
commit c172d453c1e7962d0b1741640b0c030d21fab449
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Mon Nov 3 23:41:09 2014 +0100
Create Core Update 86
-----------------------------------------------------------------------
Summary of changes:
config/rootfiles/core/{85 => 86}/exclude | 0
.../77 => core/86}/filelists/armv5tel/initscripts | 0
.../86}/filelists/armv5tel/linux-kirkwood | 0
.../77 => core/86}/filelists/armv5tel/linux-multi | 0
.../66 => core/86}/filelists/armv5tel/linux-rpi | 0
.../{oldcore/66 => core/86}/filelists/coreutils | 0
.../{oldcore/44 => core/86}/filelists/dracut | 0
config/rootfiles/core/86/filelists/files | 5 ++
.../{oldcore/53 => core/86}/filelists/i586/glibc | 0
.../{oldcore/66 => core/86}/filelists/i586/grub | 0
.../77 => core/86}/filelists/i586/initscripts | 0
.../{oldcore/66 => core/86}/filelists/i586/linux | 0
.../rootfiles/core/86/filelists/i586/linux-initrd | 1 +
.../{oldcore/44 => core/86}/filelists/libcap | 0
config/rootfiles/core/86/filelists/libsmooth | 1 +
config/rootfiles/core/86/filelists/lvm2 | 1 +
config/rootfiles/core/86/filelists/mdadm | 1 +
.../{oldcore/66 => core/86}/filelists/misc-progs | 0
config/rootfiles/core/86/filelists/multipath-tools | 1 +
.../{oldcore/66 => core/86}/filelists/newt | 0
config/rootfiles/core/86/filelists/parted | 1 +
config/rootfiles/core/86/filelists/patch | 1 +
config/rootfiles/core/86/filelists/pigz | 1 +
.../{oldcore/66 => core/86}/filelists/setup | 0
.../{oldcore/66 => core/86}/filelists/slang | 0
.../{oldcore/38 => core/86}/filelists/strongswan | 0
.../{oldcore/54 => core/86}/filelists/tzdata | 0
config/rootfiles/core/86/filelists/xfsprogs | 1 +
config/rootfiles/core/{85 => 86}/meta | 0
config/rootfiles/{oldcore/83 => core/86}/update.sh | 26 ++++++--
lfs/fireinfo | 3 +
...on-t-crash-when-no-bogomips-are-available.patch | 61 ++++++++++++++++++
...Read-board-model-from-device-tree-in-proc.patch | 72 ++++++++++++++++++++++
33 files changed, 172 insertions(+), 4 deletions(-)
copy config/rootfiles/core/{85 => 86}/exclude (100%)
copy config/rootfiles/{oldcore/77 => core/86}/filelists/armv5tel/initscripts (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/armv5tel/linux-kirkwood (100%)
copy config/rootfiles/{oldcore/77 => core/86}/filelists/armv5tel/linux-multi (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/armv5tel/linux-rpi (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/coreutils (100%)
copy config/rootfiles/{oldcore/44 => core/86}/filelists/dracut (100%)
create mode 100644 config/rootfiles/core/86/filelists/files
copy config/rootfiles/{oldcore/53 => core/86}/filelists/i586/glibc (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/i586/grub (100%)
copy config/rootfiles/{oldcore/77 => core/86}/filelists/i586/initscripts (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/i586/linux (100%)
create mode 120000 config/rootfiles/core/86/filelists/i586/linux-initrd
copy config/rootfiles/{oldcore/44 => core/86}/filelists/libcap (100%)
create mode 120000 config/rootfiles/core/86/filelists/libsmooth
create mode 120000 config/rootfiles/core/86/filelists/lvm2
create mode 120000 config/rootfiles/core/86/filelists/mdadm
copy config/rootfiles/{oldcore/66 => core/86}/filelists/misc-progs (100%)
create mode 120000 config/rootfiles/core/86/filelists/multipath-tools
copy config/rootfiles/{oldcore/66 => core/86}/filelists/newt (100%)
create mode 120000 config/rootfiles/core/86/filelists/parted
create mode 120000 config/rootfiles/core/86/filelists/patch
create mode 120000 config/rootfiles/core/86/filelists/pigz
copy config/rootfiles/{oldcore/66 => core/86}/filelists/setup (100%)
copy config/rootfiles/{oldcore/66 => core/86}/filelists/slang (100%)
copy config/rootfiles/{oldcore/38 => core/86}/filelists/strongswan (100%)
copy config/rootfiles/{oldcore/54 => core/86}/filelists/tzdata (100%)
create mode 120000 config/rootfiles/core/86/filelists/xfsprogs
copy config/rootfiles/core/{85 => 86}/meta (100%)
copy config/rootfiles/{oldcore/83 => core/86}/update.sh (82%)
create mode 100644 src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
create mode 100644 src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
Difference in files:
diff --git a/config/rootfiles/core/86/exclude b/config/rootfiles/core/86/exclude
new file mode 100644
index 0000000..18e9b4d
--- /dev/null
+++ b/config/rootfiles/core/86/exclude
@@ -0,0 +1,20 @@
+boot/config.txt
+etc/collectd.custom
+etc/ipsec.conf
+etc/ipsec.secrets
+etc/ipsec.user.conf
+etc/ipsec.user.secrets
+etc/localtime
+etc/shadow
+etc/ssh/ssh_config
+etc/ssh/sshd_config
+etc/ssl/openssl.cnf
+etc/sudoers
+etc/sysconfig/firewall.local
+etc/sysconfig/rc.local
+etc/udev/rules.d/30-persistent-network.rules
+srv/web/ipfire/html/proxy.pac
+var/ipfire/ovpn
+var/log/cache
+var/state/dhcp/dhcpd.leases
+var/updatecache
diff --git a/config/rootfiles/core/86/filelists/armv5tel/initscripts b/config/rootfiles/core/86/filelists/armv5tel/initscripts
new file mode 120000
index 0000000..af1d762
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/initscripts
@@ -0,0 +1 @@
+../../../../common/armv5tel/initscripts
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/armv5tel/linux-kirkwood b/config/rootfiles/core/86/filelists/armv5tel/linux-kirkwood
new file mode 120000
index 0000000..7217107
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/linux-kirkwood
@@ -0,0 +1 @@
+../../../../common/armv5tel/linux-kirkwood
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/armv5tel/linux-multi b/config/rootfiles/core/86/filelists/armv5tel/linux-multi
new file mode 120000
index 0000000..204eb4c
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/linux-multi
@@ -0,0 +1 @@
+../../../../common/armv5tel/linux-multi
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/armv5tel/linux-rpi b/config/rootfiles/core/86/filelists/armv5tel/linux-rpi
new file mode 120000
index 0000000..a651a49
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/armv5tel/linux-rpi
@@ -0,0 +1 @@
+../../../../common/armv5tel/linux-rpi
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/coreutils b/config/rootfiles/core/86/filelists/coreutils
new file mode 120000
index 0000000..7351ed2
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/coreutils
@@ -0,0 +1 @@
+../../../common/coreutils
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/dracut b/config/rootfiles/core/86/filelists/dracut
new file mode 120000
index 0000000..1608699
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/dracut
@@ -0,0 +1 @@
+../../../common/dracut
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/files b/config/rootfiles/core/86/filelists/files
new file mode 100644
index 0000000..cfcb0cc
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/files
@@ -0,0 +1,5 @@
+etc/system-release
+etc/issue
+var/ipfire/header.pl
+var/ipfire/langs
+var/ipfire/lang.pl
diff --git a/config/rootfiles/core/86/filelists/i586/glibc b/config/rootfiles/core/86/filelists/i586/glibc
new file mode 120000
index 0000000..943021f
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/i586/glibc
@@ -0,0 +1 @@
+../../../../common/i586/glibc
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/i586/grub b/config/rootfiles/core/86/filelists/i586/grub
new file mode 120000
index 0000000..feb236a
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/i586/grub
@@ -0,0 +1 @@
+../../../../common/i586/grub
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/i586/initscripts b/config/rootfiles/core/86/filelists/i586/initscripts
new file mode 120000
index 0000000..12d8770
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/i586/initscripts
@@ -0,0 +1 @@
+../../../../common/i586/initscripts
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/i586/linux b/config/rootfiles/core/86/filelists/i586/linux
new file mode 120000
index 0000000..693ec4b
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/i586/linux
@@ -0,0 +1 @@
+../../../../common/i586/linux
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/i586/linux-initrd b/config/rootfiles/core/86/filelists/i586/linux-initrd
new file mode 120000
index 0000000..32a03e6
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/i586/linux-initrd
@@ -0,0 +1 @@
+../../../../common/i586/linux-initrd
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/libcap b/config/rootfiles/core/86/filelists/libcap
new file mode 120000
index 0000000..ed67d95
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/libcap
@@ -0,0 +1 @@
+../../../common/libcap
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/libsmooth b/config/rootfiles/core/86/filelists/libsmooth
new file mode 120000
index 0000000..6164182
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/libsmooth
@@ -0,0 +1 @@
+../../../common/libsmooth
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/lvm2 b/config/rootfiles/core/86/filelists/lvm2
new file mode 120000
index 0000000..d640870
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/lvm2
@@ -0,0 +1 @@
+../../../common/lvm2
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/mdadm b/config/rootfiles/core/86/filelists/mdadm
new file mode 120000
index 0000000..465808b
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/mdadm
@@ -0,0 +1 @@
+../../../common/mdadm
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/misc-progs b/config/rootfiles/core/86/filelists/misc-progs
new file mode 120000
index 0000000..7223cad
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/misc-progs
@@ -0,0 +1 @@
+../../../common/misc-progs
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/multipath-tools b/config/rootfiles/core/86/filelists/multipath-tools
new file mode 120000
index 0000000..9ff6323
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/multipath-tools
@@ -0,0 +1 @@
+../../../common/multipath-tools
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/newt b/config/rootfiles/core/86/filelists/newt
new file mode 120000
index 0000000..fb3eb20
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/newt
@@ -0,0 +1 @@
+../../../common/newt
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/parted b/config/rootfiles/core/86/filelists/parted
new file mode 120000
index 0000000..89195d8
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/parted
@@ -0,0 +1 @@
+../../../common/parted
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/patch b/config/rootfiles/core/86/filelists/patch
new file mode 120000
index 0000000..27a3825
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/patch
@@ -0,0 +1 @@
+../../../common/patch
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/pigz b/config/rootfiles/core/86/filelists/pigz
new file mode 120000
index 0000000..696f8f8
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/pigz
@@ -0,0 +1 @@
+../../../common/pigz
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/setup b/config/rootfiles/core/86/filelists/setup
new file mode 120000
index 0000000..209374b
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/setup
@@ -0,0 +1 @@
+../../../common/setup
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/slang b/config/rootfiles/core/86/filelists/slang
new file mode 120000
index 0000000..228e45e
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/slang
@@ -0,0 +1 @@
+../../../common/slang
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/strongswan b/config/rootfiles/core/86/filelists/strongswan
new file mode 120000
index 0000000..90c727e
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/strongswan
@@ -0,0 +1 @@
+../../../common/strongswan
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/tzdata b/config/rootfiles/core/86/filelists/tzdata
new file mode 120000
index 0000000..5a6e325
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/tzdata
@@ -0,0 +1 @@
+../../../common/tzdata
\ No newline at end of file
diff --git a/config/rootfiles/core/86/filelists/xfsprogs b/config/rootfiles/core/86/filelists/xfsprogs
new file mode 120000
index 0000000..9103296
--- /dev/null
+++ b/config/rootfiles/core/86/filelists/xfsprogs
@@ -0,0 +1 @@
+../../../common/xfsprogs
\ No newline at end of file
diff --git a/config/rootfiles/core/86/meta b/config/rootfiles/core/86/meta
new file mode 100644
index 0000000..d547fa8
--- /dev/null
+++ b/config/rootfiles/core/86/meta
@@ -0,0 +1 @@
+DEPS=""
diff --git a/config/rootfiles/core/86/update.sh b/config/rootfiles/core/86/update.sh
new file mode 100644
index 0000000..7911a11
--- /dev/null
+++ b/config/rootfiles/core/86/update.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+############################################################################
+# #
+# This file is part of the IPFire Firewall. #
+# #
+# IPFire is free software; you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation; either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# IPFire is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with IPFire; if not, write to the Free Software #
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
+# #
+# Copyright (C) 2014 IPFire-Team <info(a)ipfire.org>. #
+# #
+############################################################################
+#
+. /opt/pakfire/lib/functions.sh
+/usr/local/bin/backupctrl exclude >/dev/null 2>&1
+
+# Find root device
+function find_root_device() {
+ while read -r dev mountpoint fs options; do
+ # Skip generic entries
+ [ "${dev}" = "rootfs" ] && continue
+
+ if [ "${mountpoint}" = "/" ]; then
+ echo "${mountpoint}"
+ break
+ fi
+ done < /proc/mounts
+}
+
+# Remove old core updates from pakfire cache to save space...
+core=86
+for (( i=1; i<=$core; i++ ))
+do
+ rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire
+done
+
+# Stop services
+
+# Remove old files
+
+# Extract files
+extract_files
+
+# Start services
+
+# Update Language cache
+perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
+
+# Upgrade to GRUB2
+root_device="$(find_root_device)"
+if ! grub-install "${root_device}"; then
+ if ! grub-install --force "${root_device}"; then
+ echo "Could not update the bootloader!"
+ fi
+fi
+
+sync
+
+# This update need a reboot...
+touch /var/run/need_reboot
+
+# Finish
+/etc/init.d/fireinfo start
+sendprofile
+
+# Don't report the exitcode last command
+exit 0
diff --git a/lfs/fireinfo b/lfs/fireinfo
index 0c36706..0bc8d44 100644
--- a/lfs/fireinfo
+++ b/lfs/fireinfo
@@ -71,6 +71,9 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
+
cd $(DIR_APP) && [ -x "configure" ] || sh ./autogen.sh
cd $(DIR_APP) && ./configure --prefix=/usr
cd $(DIR_APP) && make $(MAKETUNING)
diff --git a/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch b/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
new file mode 100644
index 0000000..f228d52
--- /dev/null
+++ b/src/patches/fireinfo/0001-bogomips-Don-t-crash-when-no-bogomips-are-available.patch
@@ -0,0 +1,61 @@
+From a9401d9542fae575d9ce2bb534cd4e598e9c7b8e Mon Sep 17 00:00:00 2001
+From: Michael Tremer <michael.tremer(a)ipfire.org>
+Date: Tue, 28 Oct 2014 21:14:41 +0100
+Subject: [PATCH 1/2] bogomips: Don't crash when no bogomips are available
+
+The RPi doesn't provide bogomips in /proc/cpuinfo any more
+and fireinfo crashed when trying to read that file
+---
+ src/fireinfo/cpu.py | 14 +++++++++-----
+ src/fireinfo/system.py | 4 +++-
+ 2 files changed, 12 insertions(+), 6 deletions(-)
+
+diff --git a/src/fireinfo/cpu.py b/src/fireinfo/cpu.py
+index 32d885db8124..541575af6bbb 100644
+--- a/src/fireinfo/cpu.py
++++ b/src/fireinfo/cpu.py
+@@ -80,12 +80,16 @@ class CPU(object):
+ """
+ Return the bogomips of this CPU.
+ """
+- try:
+- bogomips = self.__cpuinfo["bogomips"]
+- except KeyError:
+- bogomips = self.__cpuinfo["BogoMIPS"]
++ bogomips = None
++
++ for key in ("bogomips", "BogoMIPS"):
++ try:
++ bogomips = self.__cpuinfo[key]
++ except KeyError:
++ continue
+
+- return float(bogomips)
++ if bogomips:
++ return float(bogomips)
+
+ @property
+ def model(self):
+diff --git a/src/fireinfo/system.py b/src/fireinfo/system.py
+index 8e903e8e3449..890f58c05027 100644
+--- a/src/fireinfo/system.py
++++ b/src/fireinfo/system.py
+@@ -144,12 +144,14 @@ class System(object):
+ "model_string" : self.cpu.model_string,
+ "stepping" : self.cpu.stepping,
+ "flags" : self.cpu.flags,
+- "bogomips" : self.cpu.bogomips,
+ "speed" : self.cpu.speed,
+ "family" : self.cpu.family,
+ "count" : self.cpu.count
+ }
+
++ if self.cpu.bogomips:
++ p["bogomips"] = self.cpu.bogomips
++
+ p["network"] = {
+ "green" : self.network.has_green(),
+ "blue" : self.network.has_blue(),
+--
+1.9.3
+
diff --git a/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch b/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
new file mode 100644
index 0000000..de65400
--- /dev/null
+++ b/src/patches/fireinfo/0002-ARM-Read-board-model-from-device-tree-in-proc.patch
@@ -0,0 +1,72 @@
+From b9a068e26261007d4a0592fcb47f82658af2c775 Mon Sep 17 00:00:00 2001
+From: Michael Tremer <michael.tremer(a)ipfire.org>
+Date: Mon, 3 Nov 2014 21:33:45 +0100
+Subject: [PATCH 2/2] ARM: Read board model from device-tree in /proc
+
+---
+ src/fireinfo/system.py | 35 +++++++++--------------------------
+ 1 file changed, 9 insertions(+), 26 deletions(-)
+
+diff --git a/src/fireinfo/system.py b/src/fireinfo/system.py
+index 890f58c05027..195832e9f7eb 100644
+--- a/src/fireinfo/system.py
++++ b/src/fireinfo/system.py
+@@ -304,27 +304,6 @@ class System(object):
+ """
+ return read_from_file("/sys/class/dmi/id/bios_vendor")
+
+- def vendor_model_tuple(self):
+- try:
+- s = self.__cpuinfo["Hardware"]
+- except KeyError:
+- return (None, None)
+-
+- if s.startswith("ARM-Versatile"):
+- return ("ARM", s)
+-
+- try:
+- v, m = s.split(" ", 1)
+- except ValueError:
+- if s.startswith("BCM"):
+- v = "Broadcom"
+- m = s
+- else:
+- v = None
+- m = s
+-
+- return v, m
+-
+ @property
+ def vendor(self):
+ """
+@@ -337,8 +316,10 @@ class System(object):
+ break
+
+ if ret is None:
+- v, m = self.vendor_model_tuple()
+- ret = v
++ try:
++ return self.__cpuinfo["Hardware"]
++ except KeyError:
++ pass
+
+ return ret
+
+@@ -353,9 +334,11 @@ class System(object):
+ if ret:
+ break
+
+- if ret is None:
+- v, m = self.vendor_model_tuple()
+- ret = m
++ # Read device-tree model if available
++ ret = read_from_file("/proc/device-tree/model")
++ if ret:
++ # replace the NULL byte with which the DT string ends
++ ret = ret.replace(u"\u0000", "")
+
+ return ret
+
+--
+1.9.3
+
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. dc3de45125581d78a5aaa8055b6516fc4a152c79
by gitï¼ ipfire.org 04 Nov '14
by gitï¼ ipfire.org 04 Nov '14
04 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via dc3de45125581d78a5aaa8055b6516fc4a152c79 (commit)
via 21147a00f2ab7c6fe19c2dde3102227f25176c52 (commit)
via 3f491bba9212f08aa0d117c07e2aef70b6cda9a2 (commit)
via b3e7564c40d6228245c9cc570aa49940dfde778f (commit)
via ec1e1421861bdf802719ce549540a1110c9cc1a8 (commit)
from 282c47bcb414319c90f84c958141af4535e99841 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit dc3de45125581d78a5aaa8055b6516fc4a152c79
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Tue Nov 4 20:24:17 2014 +0100
kernel: build sunxi crypto driver as module.
commit 21147a00f2ab7c6fe19c2dde3102227f25176c52
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Tue Nov 4 20:21:05 2014 +0100
kernel: readd kirkwood legacy boot code.
commit 3f491bba9212f08aa0d117c07e2aef70b6cda9a2
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Tue Nov 4 20:16:17 2014 +0100
kernel: enable carl97xx hwrng.
commit b3e7564c40d6228245c9cc570aa49940dfde778f
Merge: ec1e142 282c47b
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Tue Nov 4 20:12:50 2014 +0100
Merge branch 'seventeen' of git.ipfire.org:/pub/git/ipfire-2.x into seventeen
commit ec1e1421861bdf802719ce549540a1110c9cc1a8
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Nov 2 21:45:03 2014 +0100
kernel: arm multiarch: enanble xhci.
-----------------------------------------------------------------------
Summary of changes:
.../kernel/kernel.config.armv5tel-ipfire-kirkwood | 13 +-
config/kernel/kernel.config.armv5tel-ipfire-multi | 6 +-
config/kernel/kernel.config.armv5tel-ipfire-rpi | 2 +-
config/kernel/kernel.config.i586-ipfire | 2 +-
config/kernel/kernel.config.i586-ipfire-pae | 2 +-
lfs/linux | 1 +
.../linux-3.14.22-kirkwood_legacy_boot.patch | 1562 ++++++++++++++++++++
7 files changed, 1581 insertions(+), 7 deletions(-)
create mode 100644 src/patches/linux-3.14.22-kirkwood_legacy_boot.patch
Difference in files:
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
index 67d0d04..64d0300 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
+++ b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
@@ -333,6 +333,17 @@ CONFIG_MACH_OPENRD_ULTIMATE=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
CONFIG_MACH_T5325=y
+CONFIG_MACH_DB88F6281_BP=y
+CONFIG_MACH_DOCKSTAR=y
+CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_ESATA_SHEEVAPLUG=y
+CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_INETSPACE_V2=y
+CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_NETSPACE_V2=y
+CONFIG_MACH_DREAMPLUG=y
+CONFIG_MACH_ICONNECT=y
+CONFIG_MACH_NAS6210=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
@@ -2083,7 +2094,7 @@ CONFIG_ATH9K_HTC=m
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-# CONFIG_CARL9170_HWRNG is not set
+CONFIG_CARL9170_HWRNG=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-multi b/config/kernel/kernel.config.armv5tel-ipfire-multi
index 110c199..65b1aff 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-multi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-multi
@@ -2279,7 +2279,7 @@ CONFIG_ATH9K_HTC=m
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-# CONFIG_CARL9170_HWRNG is not set
+CONFIG_CARL9170_HWRNG=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
# CONFIG_WIL6210 is not set
@@ -4383,7 +4383,7 @@ CONFIG_USB_WUSB_CBAF=m
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
@@ -5892,7 +5892,7 @@ CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_CRYPTO_DEV_OMAP_SHAM=y
CONFIG_CRYPTO_DEV_OMAP_AES=y
CONFIG_CRYPTO_DEV_SAHARA=y
-CONFIG_CRYPTO_DEV_SUNXI_SS=y
+CONFIG_CRYPTO_DEV_SUNXI_SS=m
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-rpi b/config/kernel/kernel.config.armv5tel-ipfire-rpi
index 269c633..897e1f3 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-rpi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-rpi
@@ -1515,7 +1515,7 @@ CONFIG_ATH9K_HTC=m
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-# CONFIG_CARL9170_HWRNG is not set
+CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
# CONFIG_ATH6KL_SDIO is not set
CONFIG_ATH6KL_USB=m
diff --git a/config/kernel/kernel.config.i586-ipfire b/config/kernel/kernel.config.i586-ipfire
index 03d0ead..5869b88 100644
--- a/config/kernel/kernel.config.i586-ipfire
+++ b/config/kernel/kernel.config.i586-ipfire
@@ -2243,7 +2243,7 @@ CONFIG_ATH9K_HTC=m
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-# CONFIG_CARL9170_HWRNG is not set
+CONFIG_CARL9170_HWRNG=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
diff --git a/config/kernel/kernel.config.i586-ipfire-pae b/config/kernel/kernel.config.i586-ipfire-pae
index ff3a9ee..54cfb06 100644
--- a/config/kernel/kernel.config.i586-ipfire-pae
+++ b/config/kernel/kernel.config.i586-ipfire-pae
@@ -2260,7 +2260,7 @@ CONFIG_ATH9K_HTC=m
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-# CONFIG_CARL9170_HWRNG is not set
+CONFIG_CARL9170_HWRNG=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
diff --git a/lfs/linux b/lfs/linux
index bcbdeb0..8a1ee9c 100644
--- a/lfs/linux
+++ b/lfs/linux
@@ -161,6 +161,7 @@ endif
ifeq "$(KCFG)" "-kirkwood"
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.10-mv_cesa_disable_failing_hmac_sha1.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-kirkwood_legacy_boot.patch
endif
ifeq "$(KCFG)" "-multi"
diff --git a/src/patches/linux-3.14.22-kirkwood_legacy_boot.patch b/src/patches/linux-3.14.22-kirkwood_legacy_boot.patch
new file mode 100644
index 0000000..27dfedd
--- /dev/null
+++ b/src/patches/linux-3.14.22-kirkwood_legacy_boot.patch
@@ -0,0 +1,1562 @@
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/db88f6281-bp-setup.c linux-3.14.22/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/db88f6281-bp-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/db88f6281-bp-setup.c 2014-10-15 08:32:29.000000000 +0200
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
++ *
++ * Marvell DB-88F6281-BP Development Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/sizes.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <linux/platform_data/mmc-mvsdio.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition db88f6281_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_4M
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
++};
++
++static struct mv_sata_platform_data db88f6281_sata_data = {
++ .n_ports = 2,
++};
++
++static struct mvsdio_platform_data db88f6281_mvsdio_data = {
++ .gpio_write_protect = 37,
++ .gpio_card_detect = 38,
++};
++
++static unsigned int db88f6281_mpp_config[] __initdata = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP37_GPIO,
++ MPP38_GPIO,
++ 0
++};
++
++static void __init db88f6281_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(db88f6281_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&db88f6281_ge00_data);
++ kirkwood_sata_init(&db88f6281_sata_data);
++ kirkwood_uart0_init();
++ kirkwood_sdio_init(&db88f6281_mvsdio_data);
++}
++
++static int __init db88f6281_pci_init(void)
++{
++ if (machine_is_db88f6281_bp()) {
++ u32 dev, rev;
++
++ kirkwood_pcie_id(&dev, &rev);
++ if (dev == MV88F6282_DEV_ID)
++ kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
++ else
++ kirkwood_pcie_init(KW_PCIE0);
++ }
++ return 0;
++}
++subsys_initcall(db88f6281_pci_init);
++
++MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
++ /* Maintainer: Saeed Bishara <saeed(a)marvell.com> */
++ .atag_offset = 0x100,
++ .init_machine = db88f6281_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/dockstar-setup.c linux-3.14.22/arch/arm/mach-kirkwood/dockstar-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/dockstar-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/dockstar-setup.c 2014-10-15 08:32:29.000000000 +0200
+@@ -0,0 +1,111 @@
++/*
++ * arch/arm/mach-kirkwood/dockstar-setup.c
++ *
++ * Seagate FreeAgent DockStar Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition dockstar_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_4M
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data dockstar_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct gpio_led dockstar_led_pins[] = {
++ {
++ .name = "dockstar:green:health",
++ .default_trigger = "default-on",
++ .gpio = 46,
++ .active_low = 1,
++ },
++ {
++ .name = "dockstar:orange:misc",
++ .default_trigger = "none",
++ .gpio = 47,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data dockstar_led_data = {
++ .leds = dockstar_led_pins,
++ .num_leds = ARRAY_SIZE(dockstar_led_pins),
++};
++
++static struct platform_device dockstar_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &dockstar_led_data,
++ }
++};
++
++static unsigned int dockstar_mpp_config[] __initdata = {
++ MPP29_GPIO, /* USB Power Enable */
++ MPP46_GPIO, /* LED green */
++ MPP47_GPIO, /* LED orange */
++ 0
++};
++
++static void __init dockstar_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++
++ /* setup gpio pin select */
++ kirkwood_mpp_conf(dockstar_mpp_config);
++
++ kirkwood_uart0_init();
++ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
++
++ if (gpio_request(29, "USB Power Enable") != 0 ||
++ gpio_direction_output(29, 1) != 0)
++ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
++ kirkwood_ehci_init();
++
++ kirkwood_ge00_init(&dockstar_ge00_data);
++
++ platform_device_register(&dockstar_leds);
++}
++
++MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
++ .atag_offset = 0x100,
++ .init_machine = dockstar_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-3.14.22/arch/arm/mach-kirkwood/dreamplug-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/dreamplug-setup.c 2014-11-04 00:25:48.383688273 +0100
+@@ -0,0 +1,151 @@
++/*
++ * arch/arm/mach-kirkwood/dreamplug-setup.c
++ *
++ * Marvell DreamPlug Reference Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/spi.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <linux/platform_data/mmc-mvsdio.h>
++#include "common.h"
++#include "mpp.h"
++
++static const struct flash_platform_data dreamplug_spi_slave_data = {
++ .type = "mx25l1606e",
++};
++
++static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
++ {
++ .modalias = "m25p80",
++ .platform_data = &dreamplug_spi_slave_data,
++ .irq = -1,
++ .max_speed_hz = 50000000,
++ .bus_num = 0,
++ .chip_select = 0,
++ },
++};
++
++static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
++};
++
++static struct mv_sata_platform_data dreamplug_sata_data = {
++ .n_ports = 1,
++};
++
++static struct mvsdio_platform_data dreamplug_mvsdio_data = {
++ /* unfortunately the CD signal has not been connected */
++};
++
++static struct gpio_led dreamplug_led_pins[] = {
++ {
++ .name = "dreamplug:blue:bluetooth",
++ .gpio = 47,
++ .active_low = 1,
++ },
++ {
++ .name = "dreamplug:green:wlan",
++ .gpio = 48,
++ .active_low = 1,
++ },
++ {
++ .name = "dreamplug:blue:wlanap",
++ .gpio = 49,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data dreamplug_led_data = {
++ .leds = dreamplug_led_pins,
++ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
++};
++
++static struct platform_device dreamplug_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &dreamplug_led_data,
++ }
++};
++
++static unsigned int dreamplug_mpp_config[] __initdata = {
++ MPP0_SPI_SCn,
++ MPP1_SPI_MOSI,
++ MPP2_SPI_SCK,
++ MPP3_SPI_MISO,
++ MPP4_GPIO,
++ MPP5_GPO,
++ MPP7_GPO,
++ MPP18_GPO,
++ MPP19_GPO,
++ MPP47_GPIO, /* B_BLED */
++ MPP48_GPIO, /* W_GLED */
++ MPP49_GPIO, /* W_BLED */
++ 0
++};
++
++static void __init dreamplug_legacy_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(dreamplug_mpp_config);
++
++ kirkwood_uart0_init();
++
++ spi_register_board_info(dreamplug_spi_slave_info,
++ ARRAY_SIZE(dreamplug_spi_slave_info));
++
++ kirkwood_spi_init();
++ kirkwood_ehci_init();
++
++ kirkwood_ge00_init(&dreamplug_ge00_data);
++ kirkwood_ge01_init(&dreamplug_ge01_data);
++ kirkwood_sata_init(&dreamplug_sata_data);
++ kirkwood_sdio_init(&dreamplug_mvsdio_data);
++
++ platform_device_register(&dreamplug_leds);
++}
++
++MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board")
++ /* Maintainer: Siddarth Gore <gores <at> marvell.com> */
++ .atag_offset = 0x100,
++ .init_machine = dreamplug_legacy_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++
++MACHINE_START(DREAMPLUG1, "Marvell DreamPlug Reference Board")
++ .atag_offset = 0x100,
++ .init_machine = dreamplug_legacy_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-3.14.22/arch/arm/mach-kirkwood/guruplug-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/guruplug-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/guruplug-setup.c 2014-11-04 00:25:48.383688273 +0100
+@@ -0,0 +1,135 @@
++/*
++ * arch/arm/mach-kirkwood/guruplug-setup.c
++ *
++ * Marvell GuruPlug Reference Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <linux/platform_data/mmc-mvsdio.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition guruplug_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_4M,
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mv643xx_eth_platform_data guruplug_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv643xx_eth_platform_data guruplug_ge01_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
++};
++
++static struct mv_sata_platform_data guruplug_sata_data = {
++ .n_ports = 1,
++};
++
++static struct mvsdio_platform_data guruplug_mvsdio_data = {
++ /* unfortunately the CD signal has not been connected */
++ .gpio_card_detect = -1,
++ .gpio_write_protect = -1,
++};
++
++static struct gpio_led guruplug_led_pins[] = {
++ {
++ .name = "guruplug:red:health",
++ .gpio = 46,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:green:health",
++ .gpio = 47,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:red:wmode",
++ .gpio = 48,
++ .active_low = 1,
++ },
++ {
++ .name = "guruplug:green:wmode",
++ .gpio = 49,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data guruplug_led_data = {
++ .leds = guruplug_led_pins,
++ .num_leds = ARRAY_SIZE(guruplug_led_pins),
++};
++
++static struct platform_device guruplug_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &guruplug_led_data,
++ }
++};
++
++static unsigned int guruplug_mpp_config[] __initdata = {
++ MPP46_GPIO, /* M_RLED */
++ MPP47_GPIO, /* M_GLED */
++ MPP48_GPIO, /* B_RLED */
++ MPP49_GPIO, /* B_GLED */
++ 0
++};
++
++static void __init guruplug_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(guruplug_mpp_config);
++
++ kirkwood_uart0_init();
++ kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
++
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&guruplug_ge00_data);
++ kirkwood_ge01_init(&guruplug_ge01_data);
++ kirkwood_sata_init(&guruplug_sata_data);
++ kirkwood_sdio_init(&guruplug_mvsdio_data);
++
++ platform_device_register(&guruplug_leds);
++}
++
++MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
++ /* Maintainer: Siddarth Gore <gores(a)marvell.com> */
++ .atag_offset = 0x100,
++ .init_machine = guruplug_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/iconnect-setup.c linux-3.14.22/arch/arm/mach-kirkwood/iconnect-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/iconnect-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/iconnect-setup.c 2014-11-04 00:25:48.383688273 +0100
+@@ -0,0 +1,214 @@
++/*
++ * arch/arm/mach-kirkwood/iconnect-setup.c
++ *
++ * Iomega iConnect Wireless Data Station Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/i2c.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition iconnect_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 0x440000,
++ }, {
++ .name = "uInit",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 0x440000,
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0xB),
++};
++
++static struct gpio_led iconnect_led_pins[] = {
++ {
++ .name = "iconnect:led_level",
++ .default_trigger = "default-on",
++ .gpio = 41,
++ .active_low = 0,
++ },
++
++ {
++ .name = "iconnect:blue:power",
++ .default_trigger = "default-on",
++ .gpio = 42,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:red:power",
++ .default_trigger = "none",
++ .gpio = 43,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_1",
++ .default_trigger = "none",
++ .gpio = 44,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_2",
++ .default_trigger = "none",
++ .gpio = 45,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_3",
++ .default_trigger = "none",
++ .gpio = 46,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:usb_4",
++ .default_trigger = "none",
++ .gpio = 47,
++ .active_low = 0,
++ },
++ {
++ .name = "iconnect:blue:otb",
++ .default_trigger = "none",
++ .gpio = 48,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_led_platform_data iconnect_led_data = {
++ .leds = iconnect_led_pins,
++ .num_leds = ARRAY_SIZE(iconnect_led_pins),
++};
++
++static struct platform_device iconnect_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &iconnect_led_data,
++ }
++};
++
++static struct gpio_keys_button iconnect_buttons[] = {
++ {
++ .code = KEY_COPY,
++ .gpio = 35,
++ .desc = "OTB Button",
++ .active_low = 1,
++ },
++ {
++ .code = KEY_RESTART,
++ .gpio = 12,
++ .desc = "Reset",
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_platform_data iconnect_button_data = {
++ .buttons = iconnect_buttons,
++ .nbuttons = ARRAY_SIZE(iconnect_buttons),
++};
++
++static struct platform_device iconnect_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &iconnect_button_data,
++ }
++};
++
++static unsigned int iconnect_mpp_config[] __initdata = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP12_GPIO, /* Reset Button */
++ MPP35_GPIO, /* OTB Button */
++
++ MPP41_GPIO, /* LED Level */
++ MPP42_GPIO, /* Power LED blue */
++ MPP43_GPIO, /* Power LED red */
++ MPP44_GPIO, /* USB LED 1 */
++ MPP45_GPIO, /* USB LED 2 */
++ MPP46_GPIO, /* USB LED 3 */
++ MPP47_GPIO, /* USB LED 4 */
++ MPP48_GPIO, /* OTB LED */
++ 0
++};
++
++static struct i2c_board_info __initdata iconnect_i2c = {
++ I2C_BOARD_INFO("lm63", 0x4c),
++};
++
++static void __init iconnect_legacy_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(iconnect_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&iconnect_ge00_data);
++
++ kirkwood_uart0_init();
++ platform_device_register(&iconnect_leds);
++ platform_device_register(&iconnect_button_device);
++
++ kirkwood_i2c_init();
++ i2c_register_board_info(0, &iconnect_i2c,1);
++}
++
++static int __init iconnect_pci_init(void)
++{
++ if (machine_is_iconnect()) {
++ kirkwood_pcie_init(KW_PCIE0);
++ }
++ return 0;
++}
++subsys_initcall(iconnect_pci_init);
++
++MACHINE_START(ICONNECT, "Iomega iConnect Wireless Data Station")
++ /* Maintainer: Arne Fitzenreiter <arne_f(a)ipfire.org> */
++ .atag_offset = 0x100,
++ .init_machine = iconnect_legacy_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/Kconfig linux-3.14.22/arch/arm/mach-kirkwood/Kconfig
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/Kconfig 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/arch/arm/mach-kirkwood/Kconfig 2014-11-04 01:10:52.950526196 +0100
+@@ -1,3 +1,5 @@
++
++
+ if ARCH_KIRKWOOD
+
+ menu "Marvell Kirkwood Implementations"
+@@ -72,6 +74,83 @@
+ Say 'Y' here if you want your kernel to support the
+ HP t5325 Thin Client.
+
++config MACH_DB88F6281_BP
++ bool "Marvell DB-88F6281-BP Development Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell DB-88F6281-BP Development Board.
++
++config MACH_DOCKSTAR
++ bool "Seagate FreeAgent DockStar"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ Seagate FreeAgent DockStar.
++
++config MACH_SHEEVAPLUG
++ bool "Marvell SheevaPlug Reference Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell SheevaPlug Reference Board.
++
++config MACH_ESATA_SHEEVAPLUG
++ bool "Marvell eSATA SheevaPlug Reference Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell eSATA SheevaPlug Reference Board.
++
++config MACH_GURUPLUG
++ bool "Marvell GuruPlug Reference Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell GuruPlug Reference Board.
++
++config MACH_INETSPACE_V2
++ bool "LaCie Internet Space v2 NAS Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ LaCie Internet Space v2 NAS.
++
++config MACH_NETSPACE_MAX_V2
++ bool "LaCie Network Space Max v2 NAS Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ LaCie Network Space Max v2 NAS.
++
++config MACH_NETSPACE_V2
++ bool "LaCie Network Space v2 NAS Board"
++ select KIRKWOOD_LEGACY
++ help
++ Say 'Y' here if you want your kernel to support the
++ LaCie Network Space v2 NAS.
++
++config MACH_DREAMPLUG
++ select KIRKWOOD_LEGACY
++ bool "Marvell DreamPlug Reference Board"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Marvell DreamPlug Reference Board.
++
++config MACH_ICONNECT
++ select KIRKWOOD_LEGACY
++ bool "Iomega iConnect Wireless Data Station"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Iomega iConnect Wireless Data Station.
++
++config MACH_NAS6210
++ select KIRKWOOD_LEGACY
++ bool "Raidsonic ICY BOX IB-62x0"
++ help
++ Say 'Y' here if you want your kernel to support the
++ Raidsonic ICY BOX IB-62x0.
++
+ config MACH_TS219
+ bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+ select KIRKWOOD_LEGACY
+@@ -113,6 +192,7 @@
+ Say 'Y' here if you want your kernel to support the
+ Marvell 88F6281 GTW GE Board (Flattened Device Tree).
+
++
+ endmenu
+
+ endif
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/Makefile linux-3.14.22/arch/arm/mach-kirkwood/Makefile
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/Makefile 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/arch/arm/mach-kirkwood/Makefile 2014-11-04 01:11:13.009019440 +0100
+@@ -2,6 +2,14 @@
+ obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
+ obj-$(CONFIG_PM) += pm.o
+
++obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
++obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
++obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
++obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
++obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
++obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
++obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
++obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
+@@ -11,6 +19,8 @@
+ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
+ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
++obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
++obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
+
+ obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+ obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/nas6210-setup.c linux-3.14.22/arch/arm/mach-kirkwood/nas6210-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/nas6210-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/nas6210-setup.c 2014-11-04 00:25:48.393687522 +0100
+@@ -0,0 +1,185 @@
++/*
++ * arch/arm/mach-kirkwood/nas6210-setup.c
++ *
++ * Raidsonic ICYBOX NAS6210 and 6220 Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/i2c.h>
++#include <linux/input.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++#define NAS6210_GPIO_POWER_OFF 24
++
++static struct mtd_partition nas6210_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M,
++ .mask_flags = MTD_WRITEABLE, /* read only */
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = (SZ_1M*6),
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mv643xx_eth_platform_data nas6210_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
++};
++
++static struct mv_sata_platform_data nas6210_sata_data = {
++ .n_ports = 2,
++};
++
++static struct gpio_led nas6210_led_pins[] = {
++ {
++ .name = "nas6210:green:power",
++ .default_trigger = "default-on",
++ .gpio = 25,
++ .active_low = 0,
++ },
++ {
++ .name = "nas6210:red:power",
++ .default_trigger = "none",
++ .gpio = 22,
++ .active_low = 0,
++ },
++ {
++ .name = "nas6210:red:usb_copy",
++ .default_trigger = "none",
++ .gpio = 27,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_led_platform_data nas6210_led_data = {
++ .leds = nas6210_led_pins,
++ .num_leds = ARRAY_SIZE(nas6210_led_pins),
++};
++
++static struct platform_device nas6210_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &nas6210_led_data,
++ }
++};
++
++static struct gpio_keys_button nas6210_buttons[] = {
++ {
++ .code = KEY_COPY,
++ .gpio = 29,
++ .desc = "USB Copy",
++ .active_low = 1,
++ },
++ {
++ .code = KEY_RESTART,
++ .gpio = 28,
++ .desc = "Reset",
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_platform_data nas6210_button_data = {
++ .buttons = nas6210_buttons,
++ .nbuttons = ARRAY_SIZE(nas6210_buttons),
++};
++
++static struct platform_device nas6210_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &nas6210_button_data,
++ }
++};
++
++static unsigned int nas6210_mpp_config[] __initdata = {
++ MPP0_NF_IO2,
++ MPP1_NF_IO3,
++ MPP2_NF_IO4,
++ MPP3_NF_IO5,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP22_GPIO, /* Power LED red */
++ MPP24_GPIO, /* Power off */
++ MPP25_GPIO, /* Power LED green */
++ MPP27_GPIO, /* USB transfer LED */
++ MPP28_GPIO, /* Reset button */
++ MPP29_GPIO, /* USB Copy button */
++ 0
++};
++
++void nas6210_power_off(void)
++{
++ gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
++ while(1);
++}
++
++static void __init nas6210_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(nas6210_mpp_config);
++
++ kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&nas6210_ge00_data);
++ kirkwood_sata_init(&nas6210_sata_data);
++ kirkwood_uart0_init();
++ platform_device_register(&nas6210_leds);
++ platform_device_register(&nas6210_button_device);
++
++ if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
++ gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
++ pm_power_off = nas6210_power_off;
++
++ else
++ pr_err("nas6210: failed to configure power-off gpio pin");
++}
++
++static int __init nas6210_pci_init(void)
++{
++ if (machine_is_nas6210()) {
++ kirkwood_pcie_init(KW_PCIE0);
++ }
++ return 0;
++}
++subsys_initcall(nas6210_pci_init);
++
++MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS62x0")
++ /* Maintainer: Arne Fitzenreiter <arne_f(a)ipfire.org> */
++ .atag_offset = 0x00000100,
++ .init_machine = nas6210_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/netspace_v2-setup.c linux-3.14.22/arch/arm/mach-kirkwood/netspace_v2-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/netspace_v2-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/netspace_v2-setup.c 2014-10-15 08:32:29.000000000 +0200
+@@ -0,0 +1,293 @@
++/*
++ * arch/arm/mach-kirkwood/netspace_v2-setup.c
++ *
++ * LaCie Network Space v2 board setup
++ *
++ * Copyright (C) 2009 Simon Guinot <sguinot(a)lacie.com>
++ * Copyright (C) 2009 Benoît Canet <benoit.canet(a)gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/input.h>
++#include <linux/gpio.h>
++#include <linux/gpio_keys.h>
++#include <linux/leds.h>
++#include <linux/gpio-fan.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <linux/platform_data/leds-kirkwood-ns2.h>
++#include "common.h"
++#include "mpp.h"
++#include "lacie_v2-common.h"
++
++/*****************************************************************************
++ * Ethernet
++ ****************************************************************************/
++
++static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
++};
++
++/*****************************************************************************
++ * SATA
++ ****************************************************************************/
++
++static struct mv_sata_platform_data netspace_v2_sata_data = {
++ .n_ports = 2,
++};
++
++/*****************************************************************************
++ * GPIO keys
++ ****************************************************************************/
++
++#define NETSPACE_V2_PUSH_BUTTON 32
++
++static struct gpio_keys_button netspace_v2_buttons[] = {
++ [0] = {
++ .code = KEY_POWER,
++ .gpio = NETSPACE_V2_PUSH_BUTTON,
++ .desc = "Power push button",
++ .active_low = 0,
++ },
++};
++
++static struct gpio_keys_platform_data netspace_v2_button_data = {
++ .buttons = netspace_v2_buttons,
++ .nbuttons = ARRAY_SIZE(netspace_v2_buttons),
++};
++
++static struct platform_device netspace_v2_gpio_buttons = {
++ .name = "gpio-keys",
++ .id = -1,
++ .dev = {
++ .platform_data = &netspace_v2_button_data,
++ },
++};
++
++/*****************************************************************************
++ * GPIO LEDs
++ ****************************************************************************/
++
++#define NETSPACE_V2_GPIO_RED_LED 12
++
++static struct gpio_led netspace_v2_gpio_led_pins[] = {
++ {
++ .name = "ns_v2:red:fail",
++ .gpio = NETSPACE_V2_GPIO_RED_LED,
++ },
++};
++
++static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
++ .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins),
++ .leds = netspace_v2_gpio_led_pins,
++};
++
++static struct platform_device netspace_v2_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &netspace_v2_gpio_leds_data,
++ },
++};
++
++/*****************************************************************************
++ * Dual-GPIO CPLD LEDs
++ ****************************************************************************/
++
++#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29
++#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30
++
++static struct ns2_led netspace_v2_led_pins[] = {
++ {
++ .name = "ns_v2:blue:sata",
++ .cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD,
++ .slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW,
++ },
++};
++
++static struct ns2_led_platform_data netspace_v2_leds_data = {
++ .num_leds = ARRAY_SIZE(netspace_v2_led_pins),
++ .leds = netspace_v2_led_pins,
++};
++
++static struct platform_device netspace_v2_leds = {
++ .name = "leds-ns2",
++ .id = -1,
++ .dev = {
++ .platform_data = &netspace_v2_leds_data,
++ },
++};
++
++/*****************************************************************************
++ * GPIO fan
++ ****************************************************************************/
++
++/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
++static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
++ { 0, 0 },
++ { 1500, 15 },
++ { 1700, 14 },
++ { 1800, 13 },
++ { 2100, 12 },
++ { 3100, 11 },
++ { 3300, 10 },
++ { 4300, 9 },
++ { 5500, 8 },
++};
++
++static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
++
++static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
++ .gpio = 25,
++ .active_low = 1,
++};
++
++static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
++ .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl),
++ .ctrl = netspace_max_v2_fan_ctrl,
++ .alarm = &netspace_max_v2_fan_alarm,
++ .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed),
++ .speed = netspace_max_v2_fan_speed,
++};
++
++static struct platform_device netspace_max_v2_gpio_fan = {
++ .name = "gpio-fan",
++ .id = -1,
++ .dev = {
++ .platform_data = &netspace_max_v2_fan_data,
++ },
++};
++
++/*****************************************************************************
++ * General Setup
++ ****************************************************************************/
++
++static unsigned int netspace_v2_mpp_config[] __initdata = {
++ MPP0_SPI_SCn,
++ MPP1_SPI_MOSI,
++ MPP2_SPI_SCK,
++ MPP3_SPI_MISO,
++ MPP4_NF_IO6,
++ MPP5_NF_IO7,
++ MPP6_SYSRST_OUTn,
++ MPP7_GPO, /* Fan speed (bit 1) */
++ MPP8_TW0_SDA,
++ MPP9_TW0_SCK,
++ MPP10_UART0_TXD,
++ MPP11_UART0_RXD,
++ MPP12_GPO, /* Red led */
++ MPP14_GPIO, /* USB fuse */
++ MPP16_GPIO, /* SATA 0 power */
++ MPP17_GPIO, /* SATA 1 power */
++ MPP18_NF_IO0,
++ MPP19_NF_IO1,
++ MPP20_SATA1_ACTn,
++ MPP21_SATA0_ACTn,
++ MPP22_GPIO, /* Fan speed (bit 0) */
++ MPP23_GPIO, /* Fan power */
++ MPP24_GPIO, /* USB mode select */
++ MPP25_GPIO, /* Fan rotation fail */
++ MPP26_GPIO, /* USB device vbus */
++ MPP28_GPIO, /* USB enable host vbus */
++ MPP29_GPIO, /* Blue led (slow register) */
++ MPP30_GPIO, /* Blue led (command register) */
++ MPP31_GPIO, /* Board power off */
++ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
++ MPP33_GPO, /* Fan speed (bit 2) */
++ 0
++};
++
++#define NETSPACE_V2_GPIO_POWER_OFF 31
++
++static void netspace_v2_power_off(void)
++{
++ gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
++}
++
++static void __init netspace_v2_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++ kirkwood_mpp_conf(netspace_v2_mpp_config);
++
++ if (machine_is_netspace_max_v2())
++ lacie_v2_hdd_power_init(2);
++ else
++ lacie_v2_hdd_power_init(1);
++
++ kirkwood_ehci_init();
++ kirkwood_ge00_init(&netspace_v2_ge00_data);
++ kirkwood_sata_init(&netspace_v2_sata_data);
++ kirkwood_uart0_init();
++ lacie_v2_register_flash();
++ lacie_v2_register_i2c_devices();
++
++ platform_device_register(&netspace_v2_leds);
++ platform_device_register(&netspace_v2_gpio_leds);
++ platform_device_register(&netspace_v2_gpio_buttons);
++ if (machine_is_netspace_max_v2())
++ platform_device_register(&netspace_max_v2_gpio_fan);
++
++ if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
++ gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
++ pm_power_off = netspace_v2_power_off;
++ else
++ pr_err("netspace_v2: failed to configure power-off GPIO\n");
++}
++
++#ifdef CONFIG_MACH_NETSPACE_V2
++MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
++ .atag_offset = 0x100,
++ .init_machine = netspace_v2_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++#endif
++
++#ifdef CONFIG_MACH_INETSPACE_V2
++MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
++ .atag_offset = 0x100,
++ .init_machine = netspace_v2_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++#endif
++
++#ifdef CONFIG_MACH_NETSPACE_MAX_V2
++MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
++ .atag_offset = 0x100,
++ .init_machine = netspace_v2_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++#endif
+diff -Naur linux-3.14.22.org/arch/arm/mach-kirkwood/sheevaplug-setup.c linux-3.14.22/arch/arm/mach-kirkwood/sheevaplug-setup.c
+--- linux-3.14.22.org/arch/arm/mach-kirkwood/sheevaplug-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/arch/arm/mach-kirkwood/sheevaplug-setup.c 2014-10-15 08:32:29.000000000 +0200
+@@ -0,0 +1,161 @@
++/*
++ * arch/arm/mach-kirkwood/sheevaplug-setup.c
++ *
++ * Marvell SheevaPlug Reference Board Setup
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/ata_platform.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include <linux/platform_data/mmc-mvsdio.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition sheevaplug_nand_parts[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = SZ_1M
++ }, {
++ .name = "uImage",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = SZ_4M
++ }, {
++ .name = "root",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL
++ },
++};
++
++static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
++ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
++};
++
++static struct mv_sata_platform_data sheeva_esata_sata_data = {
++ .n_ports = 2,
++};
++
++static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
++ /* unfortunately the CD signal has not been connected */
++};
++
++static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
++ .gpio_write_protect = 44, /* MPP44 used as SD write protect */
++ .gpio_card_detect = 47, /* MPP47 used as SD card detect */
++};
++
++static struct gpio_led sheevaplug_led_pins[] = {
++ {
++ .name = "plug:red:misc",
++ .default_trigger = "none",
++ .gpio = 46,
++ .active_low = 1,
++ },
++ {
++ .name = "plug:green:health",
++ .default_trigger = "default-on",
++ .gpio = 49,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data sheevaplug_led_data = {
++ .leds = sheevaplug_led_pins,
++ .num_leds = ARRAY_SIZE(sheevaplug_led_pins),
++};
++
++static struct platform_device sheevaplug_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &sheevaplug_led_data,
++ }
++};
++
++static unsigned int sheevaplug_mpp_config[] __initdata = {
++ MPP29_GPIO, /* USB Power Enable */
++ MPP46_GPIO, /* LED Red */
++ MPP49_GPIO, /* LED */
++ 0
++};
++
++static unsigned int sheeva_esata_mpp_config[] __initdata = {
++ MPP29_GPIO, /* USB Power Enable */
++ MPP44_GPIO, /* SD Write Protect */
++ MPP47_GPIO, /* SD Card Detect */
++ MPP49_GPIO, /* LED Green */
++ 0
++};
++
++static void __init sheevaplug_init(void)
++{
++ /*
++ * Basic setup. Needs to be called early.
++ */
++ kirkwood_init();
++
++ /* setup gpio pin select */
++ if (machine_is_esata_sheevaplug())
++ kirkwood_mpp_conf(sheeva_esata_mpp_config);
++ else
++ kirkwood_mpp_conf(sheevaplug_mpp_config);
++
++ kirkwood_uart0_init();
++ kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
++
++ if (gpio_request(29, "USB Power Enable") != 0 ||
++ gpio_direction_output(29, 1) != 0)
++ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
++ kirkwood_ehci_init();
++
++ kirkwood_ge00_init(&sheevaplug_ge00_data);
++
++ /* honor lower power consumption for plugs with out eSATA */
++ if (machine_is_esata_sheevaplug())
++ kirkwood_sata_init(&sheeva_esata_sata_data);
++
++ /* enable sd wp and sd cd on plugs with esata */
++ if (machine_is_esata_sheevaplug())
++ kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
++ else
++ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
++
++ platform_device_register(&sheevaplug_leds);
++}
++
++#ifdef CONFIG_MACH_SHEEVAPLUG
++MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
++ /* Maintainer: shadi Ammouri <shadi(a)marvell.com> */
++ .atag_offset = 0x100,
++ .init_machine = sheevaplug_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++#endif
++
++#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
++MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
++ .atag_offset = 0x100,
++ .init_machine = sheevaplug_init,
++ .map_io = kirkwood_map_io,
++ .init_early = kirkwood_init_early,
++ .init_irq = kirkwood_init_irq,
++ .init_time = kirkwood_timer_init,
++ .restart = kirkwood_restart,
++MACHINE_END
++#endif
+diff -Naur linux-3.14.22.org/arch/arm/tools/mach-types linux-3.14.22/arch/arm/tools/mach-types
+--- linux-3.14.22.org/arch/arm/tools/mach-types 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/arch/arm/tools/mach-types 2014-11-04 00:25:48.393687522 +0100
+@@ -447,6 +447,7 @@
+ smartq5 MACH_SMARTQ5 SMARTQ5 2534
+ davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548
+ mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
++guruplug MACH_GURUPLUG GURUPLUG 2601
+ capc7117 MACH_CAPC7117 CAPC7117 2612
+ icontrol MACH_ICONTROL ICONTROL 2624
+ gplugd MACH_GPLUGD GPLUGD 2625
+@@ -454,7 +455,7 @@
+ mx23evk MACH_MX23EVK MX23EVK 2629
+ ap4evb MACH_AP4EVB AP4EVB 2630
+ mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
+-guruplug MACH_GURUPLUG GURUPLUG 2659
++dreamplug1 MACH_DREAMPLUG1 DREAMPLUG1 2659
+ spear310 MACH_SPEAR310 SPEAR310 2660
+ spear320 MACH_SPEAR320 SPEAR320 2661
+ aquila MACH_AQUILA AQUILA 2676
+@@ -491,6 +492,7 @@
+ t5325 MACH_T5325 T5325 2846
+ income MACH_INCOME INCOME 2849
+ goni MACH_GONI GONI 2862
++iconnect MACH_ICONNECT ICONNECT 2870
+ bv07 MACH_BV07 BV07 2882
+ openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884
+ devixp MACH_DEVIXP DEVIXP 2885
+@@ -520,6 +522,7 @@
+ vpr200 MACH_VPR200 VPR200 3087
+ torbreck MACH_TORBRECK TORBRECK 3090
+ prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
++nas6210 MACH_NAS6210 NAS6210 3104
+ paz00 MACH_PAZ00 PAZ00 3128
+ acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
+ ag5evm MACH_AG5EVM AG5EVM 3189
+@@ -544,6 +547,7 @@
+ nspire MACH_NSPIRE NSPIRE 3503
+ nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522
+ mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543
++dreamplug MACH_DREAMPLUG DREAMPLUG 3550
+ deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568
+ m28evk MACH_M28EVK M28EVK 3613
+ kota2 MACH_KOTA2 KOTA2 3616
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 3.x development tree branch, master, updated. 2161fb217c23b63bd91838f97d9eb95e0c2065b8
by gitï¼ ipfire.org 04 Nov '14
by gitï¼ ipfire.org 04 Nov '14
04 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 3.x development tree".
The branch, master has been updated
via 2161fb217c23b63bd91838f97d9eb95e0c2065b8 (commit)
from dad4a462549537293d7b417e2b378dd2e6c1c67c (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 2161fb217c23b63bd91838f97d9eb95e0c2065b8
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Tue Nov 4 13:51:55 2014 +0100
gcc: Update to 4.9.2
Bugfixing release for various regressions and smaller problems
-----------------------------------------------------------------------
Summary of changes:
gcc/gcc.nm | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Difference in files:
diff --git a/gcc/gcc.nm b/gcc/gcc.nm
index 919dccc..e3ac2a2 100644
--- a/gcc/gcc.nm
+++ b/gcc/gcc.nm
@@ -7,7 +7,7 @@
build_cloog = 1
name = gcc
-version = 4.9.1
+version = 4.9.2
release = 1
maintainer = Michael Tremer <michael.tremer(a)ipfire.org>
hooks/post-receive
--
IPFire 3.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. 282c47bcb414319c90f84c958141af4535e99841
by gitï¼ ipfire.org 03 Nov '14
by gitï¼ ipfire.org 03 Nov '14
03 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via 282c47bcb414319c90f84c958141af4535e99841 (commit)
from 6cc8832e28a71b807063be71586f3853c233ab32 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 282c47bcb414319c90f84c958141af4535e99841
Author: Sascha Kilian <untoter2000(a)hotmail.com>
Date: Fri Oct 31 16:15:54 2014 +0100
nagios+icinga plugins: removed ipv6 support
-----------------------------------------------------------------------
Summary of changes:
lfs/icinga | 3 ++-
lfs/nagios | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
Difference in files:
diff --git a/lfs/icinga b/lfs/icinga
index 691d83d..ab562f2 100644
--- a/lfs/icinga
+++ b/lfs/icinga
@@ -112,7 +112,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
--prefix=/usr \
--libexecdir=/usr/lib/icinga/plugins \
--with-nagios-user=nobody \
- --with-nagios-group=nobody
+ --with-nagios-group=nobody \
+ --without-ipv6
cd $(DIR_SRC)/nagios-plugins-$(PLUGIN_VER) && make $(MAKETUNING)
# Install core
diff --git a/lfs/nagios b/lfs/nagios
index a9cef53..868272b 100644
--- a/lfs/nagios
+++ b/lfs/nagios
@@ -102,7 +102,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
cd $(DIR_SRC) && tar xfz $(DIR_DL)/nagios-plugins-1.4.13.tar.gz
cd $(DIR_SRC)/nagios-plugins* && ./configure --prefix=/usr \
--libexecdir=/usr/lib/nagios \
- --with-nagios-user=nobody --with-nagios-group=nobody
+ --with-nagios-user=nobody --with-nagios-group=nobody \
+ --without-ipv6
cd $(DIR_SRC)/nagios-plugins* && make
cd $(DIR_SRC)/nagios-plugins* && make install
chown -R nobody:nobody /var/nagios
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. 6cc8832e28a71b807063be71586f3853c233ab32
by gitï¼ ipfire.org 03 Nov '14
by gitï¼ ipfire.org 03 Nov '14
03 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via 6cc8832e28a71b807063be71586f3853c233ab32 (commit)
via 2fa7ff4e0d9434254ab7b10fd987de6dfe5a8ee7 (commit)
from a5c99abe185bb8429149f4eadc1ce8244d3f6130 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 6cc8832e28a71b807063be71586f3853c233ab32
Author: David Kleuker <dkl(a)basecom.de>
Date: Mon Nov 3 17:43:25 2014 +0100
fix typo
commit 2fa7ff4e0d9434254ab7b10fd987de6dfe5a8ee7
Author: David Kleuker <dkl(a)basecom.de>
Date: Mon Nov 3 17:33:27 2014 +0100
use bash instead of sh
-----------------------------------------------------------------------
Summary of changes:
config/xen-image/README | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Difference in files:
diff --git a/config/xen-image/README b/config/xen-image/README
index 5318673..a23491f 100644
--- a/config/xen-image/README
+++ b/config/xen-image/README
@@ -21,5 +21,5 @@ other usefull commands from the Dom0:
This script can also build a Citrix XenCenter xva image. (Need xz-aware
xen version. Tested with Citrix Xen Server 6.2.5 beta)
-- run "XEN_IMG_TYPE=xva sh xen-image-maker.sh" to build an xva image.
-- import the vm with "xe vm-import file=ipfire.xfa"
+- run "XEN_IMG_TYPE=xva bash xen-image-maker.sh" to build an xva image.
+- import the vm with "xe vm-import file=ipfire.xva"
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. a5c99abe185bb8429149f4eadc1ce8244d3f6130
by gitï¼ ipfire.org 03 Nov '14
by gitï¼ ipfire.org 03 Nov '14
03 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via a5c99abe185bb8429149f4eadc1ce8244d3f6130 (commit)
via 8f6e429843317243f412486813533c610c186673 (commit)
from b154ded15d18987dfad297ee1ea7a07feb87bab6 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit a5c99abe185bb8429149f4eadc1ce8244d3f6130
Merge: 8f6e429 b154ded
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Mon Nov 3 18:36:31 2014 +0100
Merge remote-tracking branch 'origin/seventeen' into seventeen
commit 8f6e429843317243f412486813533c610c186673
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Mon Nov 3 18:35:56 2014 +0100
installer: Correctly position buttons in dialogs
-----------------------------------------------------------------------
Summary of changes:
src/installer/main.c | 39 +++++++++++++++++++++++++++++++++------
1 file changed, 33 insertions(+), 6 deletions(-)
Difference in files:
diff --git a/src/installer/main.c b/src/installer/main.c
index ad388e6..9262a40 100644
--- a/src/installer/main.c
+++ b/src/installer/main.c
@@ -104,6 +104,37 @@ static int newtWinOkCancel(const char* title, const char* message, int width, in
const char* btn_txt_ok, const char* btn_txt_cancel) {
int ret = 1;
+ unsigned int btn_width_ok = strlen(btn_txt_ok);
+ unsigned int btn_width_cancel = strlen(btn_txt_cancel);
+
+ // Maybe make the box wider to fix both buttons inside
+ unsigned int min_width = btn_width_ok + btn_width_cancel + 5;
+ if (width < min_width)
+ width = min_width;
+
+ unsigned int btn_pos_ok = (width / 3) - (btn_width_ok / 2) - 1;
+ unsigned int btn_pos_cancel = (width * 2 / 3) - (btn_width_cancel / 2) - 1;
+
+ // Move buttons a bit if they overlap
+ while ((btn_pos_ok + btn_width_ok + 5) > btn_pos_cancel) {
+ // Move the cancel button to the right if there is enough space left
+ if ((btn_pos_cancel + btn_width_cancel + 2) < width) {
+ ++btn_pos_cancel;
+ continue;
+ }
+
+ // Move the OK button to the left if possible
+ if (btn_pos_ok > 1) {
+ --btn_pos_ok;
+ continue;
+ }
+
+ // If they still overlap, we cannot fix the situtation
+ // and break. Should actually never get here, because we
+ // adjust the width of the window earlier.
+ break;
+ }
+
newtCenteredWindow(width, height, title);
newtComponent form = newtForm(NULL, NULL, 0);
@@ -112,12 +143,8 @@ static int newtWinOkCancel(const char* title, const char* message, int width, in
newtTextboxSetText(textbox, message);
newtFormAddComponent(form, textbox);
- unsigned int btn_width_ok = strlen(btn_txt_ok);
- unsigned int btn_width_cancel = strlen(btn_txt_cancel);
-
- newtComponent btn_ok = newtButton((width / 3) - (btn_width_ok / 2) - 2, height - 4, btn_txt_ok);
- newtComponent btn_cancel = newtButton((width * 2 / 3) - (btn_width_cancel / 2) - 2, height - 4,
- btn_txt_cancel);
+ newtComponent btn_ok = newtButton(btn_pos_ok, height - 4, btn_txt_ok);
+ newtComponent btn_cancel = newtButton(btn_pos_cancel, height - 4, btn_txt_cancel);
newtFormAddComponents(form, btn_ok, btn_cancel, NULL);
hooks/post-receive
--
IPFire 2.x development tree
1
0
[git.ipfire.org] IPFire 2.x development tree branch, seventeen, updated. b154ded15d18987dfad297ee1ea7a07feb87bab6
by gitï¼ ipfire.org 02 Nov '14
by gitï¼ ipfire.org 02 Nov '14
02 Nov '14
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, seventeen has been updated
via b154ded15d18987dfad297ee1ea7a07feb87bab6 (commit)
via 1bbc591d4dcce94f85bc7f1de7d49f4a42d828b6 (commit)
via 22820bf25673d6d709f674796e64890af5578f2d (commit)
via 932a34e57e3fb433ce86ab71359a26ebeb4d6410 (commit)
via 9b35b114a0300b014f0a4f8e9325801868568931 (commit)
via bf65f292ddec09c83fe7e8e3cb8e182a3093dfa4 (commit)
via f18d70385a178206aa8d3f078bd53f38f5aa98eb (commit)
via 9f5f4957cb5483884a065888479122689383e6dc (commit)
via 9d3616dc517ae3d1a3568c92b7c7c2a58d4503ca (commit)
via 048fb6b9ea374d055200576a0a6467de46b4c0ad (commit)
via c409c335266ae7880bdd1c4712102935724d9c94 (commit)
via b76a0377bece73e0ac34ac310b2a8b2fcb8813c7 (commit)
via dbd34ac0f274469b2150c01d1929bbc7e8d239af (commit)
via 6f23e39ee2c62d91d0013caaaa21796d0056cff9 (commit)
via f456f0b29ca2989772f88b44895c83cc42a8ec0b (commit)
via bedebe884765e82184ed1bcc0a5a551b4d479b03 (commit)
via a115a8908c2527d7c48b0cfdcf27e773646549bf (commit)
via 32f17a8e4ad0701b3ddbcc22b353bb5430c9d42b (commit)
via b16d2d678adfd57c09fcd11a396896e5c83c70d7 (commit)
via 522b5fbf3eb489ab0cb9b1b4e42920cc365764e9 (commit)
via 085d99757cd88cfddd860a5f3809f06d833b3158 (commit)
via ecc92f3c835ba632d399154072631b340c2bac5c (commit)
via f9ed7916f6baf5d6efd174182fd29f97a56d7499 (commit)
via cd4aceeb1299799502ade8c4071136431e49b3da (commit)
via 8c9b2d9e878137084820ab66356410d9fc93f100 (commit)
via f43f57f29fbdb54e3a3dad29786b68da872478d6 (commit)
via 9a84861c6ce46968cabeb0297a7498db69c4108b (commit)
via a767496442939a5e5cec1a44114f2f747ef07a07 (commit)
via 0239bcec1f6bb4a7209f28c743a8ec946930b725 (commit)
via d156e682d4242c2255d34bf76fb82e144f22ea16 (commit)
via ee34ac456231034d90d12c30b07e18515d2496d2 (commit)
via af39690185dedb82ad5ccfb88c574d04465ef12d (commit)
via a4c4d9c8197f1dc20d554003ed6abc3187c68ae1 (commit)
via e544014348c27e4ab7c8b6e4f208ff4b21eaa2d3 (commit)
via e43d0fe67288cbb9cadf3552903da470f8043efd (commit)
via 0e20a6c670f0c66f0ac8a2634ef715ddfd98256a (commit)
via 0d8088144007b7a2445f6652ec9eb4021dbca00f (commit)
via ccb96d4fc5065cdf85fef7344ef1f9cf624fd309 (commit)
via 60984f8c47974e2cfb4e8eb04a50b6a78ab6af18 (commit)
via 46c1880c4fddbc8a7725d946e3ff8b462e77baea (commit)
via 0c36f63ca2f50aa8cd6c4e81a35e26e83d624dd6 (commit)
from 7b6d7c6938e0fee73bb9774ce3a9b6b1c4c83e12 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit b154ded15d18987dfad297ee1ea7a07feb87bab6
Merge: 1bbc591 22820bf
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Nov 2 09:38:44 2014 +0100
Merge branch 'kernel-test-next' into seventeen
commit 1bbc591d4dcce94f85bc7f1de7d49f4a42d828b6
Merge: b76a037 7b6d7c6
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Nov 2 09:38:23 2014 +0100
Merge branch 'seventeen' of ssh://git.ipfire.org/pub/git/ipfire-2.x into seventeen
commit 22820bf25673d6d709f674796e64890af5578f2d
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Nov 1 19:57:51 2014 +0100
kernel: use correct external modules at initrd build.
commit 932a34e57e3fb433ce86ab71359a26ebeb4d6410
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Nov 1 17:26:09 2014 +0100
kernel: patches and preliminary 3.14 config for arm.
commit 9b35b114a0300b014f0a4f8e9325801868568931
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Nov 1 17:23:40 2014 +0100
flash-images: distro image is not compressed on arm.
commit bf65f292ddec09c83fe7e8e3cb8e182a3093dfa4
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Nov 1 17:19:09 2014 +0100
kernel: rootfile update (i586).
commit f18d70385a178206aa8d3f078bd53f38f5aa98eb
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Nov 1 17:18:43 2014 +0100
glibc: rootfile update (i586)
commit 9f5f4957cb5483884a065888479122689383e6dc
Merge: 9d3616d 7b6d7c6
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Oct 31 17:32:58 2014 +0100
Merge remote-tracking branch 'origin/seventeen' into kernel-test-next
commit 9d3616dc517ae3d1a3568c92b7c7c2a58d4503ca
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Oct 26 16:40:04 2014 +0100
kernel: update to 3.14.22 (intel only yet).
commit 048fb6b9ea374d055200576a0a6467de46b4c0ad
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Oct 26 16:38:38 2014 +0100
cryptodev: update to unreleased 1.7 from git.
commit c409c335266ae7880bdd1c4712102935724d9c94
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Oct 26 16:37:44 2014 +0100
glibc: fix build on intel platform.
commit b76a0377bece73e0ac34ac310b2a8b2fcb8813c7
Merge: f2a7ec2 dbd34ac
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Oct 24 12:00:34 2014 +0200
Merge branch 'kernel-test' into seventeen
commit dbd34ac0f274469b2150c01d1929bbc7e8d239af
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Oct 24 11:58:00 2014 +0200
kernel: fix build on rpi.
commit 6f23e39ee2c62d91d0013caaaa21796d0056cff9
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Wed Oct 15 20:42:38 2014 +0200
kernel: fix build for rpi.
the eMMC patch is also inside of the rpi patchset from rpi-foundation so it cannot applied again.
commit f456f0b29ca2989772f88b44895c83cc42a8ec0b
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Wed Oct 15 16:11:27 2014 +0200
kernel: uodate to 3.10.58.
commit bedebe884765e82184ed1bcc0a5a551b4d479b03
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Oct 11 09:26:57 2014 +0200
kernel: add eMMC 5.x support.
commit a115a8908c2527d7c48b0cfdcf27e773646549bf
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Oct 11 09:14:04 2014 +0200
kernel: update to 3.10.57.
commit 32f17a8e4ad0701b3ddbcc22b353bb5430c9d42b
Merge: b16d2d6 52dae2b
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Oct 11 09:11:10 2014 +0200
Merge branch 'master' into kernel-test
commit b16d2d678adfd57c09fcd11a396896e5c83c70d7
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Oct 6 12:59:15 2014 +0200
kernel: update to 3.10.56.
commit 522b5fbf3eb489ab0cb9b1b4e42920cc365764e9
Merge: 085d997 e43b212
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Oct 6 10:11:13 2014 +0200
Merge remote-tracking branch 'origin/master' into kernel-test
commit 085d99757cd88cfddd860a5f3809f06d833b3158
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Oct 5 21:44:54 2014 +0200
rt2800usb: remove some queue warnings.
commit ecc92f3c835ba632d399154072631b340c2bac5c
Merge: f9ed791 416bf5f
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Sep 29 13:45:06 2014 +0200
Merge branch 'master' into kernel-test
commit f9ed7916f6baf5d6efd174182fd29f97a56d7499
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Sep 29 13:40:12 2014 +0200
e1000e: fix modul path.
commit cd4aceeb1299799502ade8c4071136431e49b3da
Merge: 8c9b2d9 61466ab
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Sep 29 09:22:42 2014 +0200
Merge branch 'master' into kernel-test
commit 8c9b2d9e878137084820ab66356410d9fc93f100
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Thu Sep 25 20:28:27 2014 +0200
kernel: update to 3.10.55.
commit f43f57f29fbdb54e3a3dad29786b68da872478d6
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Sep 6 17:05:34 2014 +0200
kernel: update to 3.10.54.
commit 9a84861c6ce46968cabeb0297a7498db69c4108b
Merge: a767496 3588022
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Sep 6 13:40:49 2014 +0200
Merge remote-tracking branch 'origin/master' into kernel-test
commit a767496442939a5e5cec1a44114f2f747ef07a07
Merge: 0239bce 48f989d
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Aug 23 17:07:26 2014 +0200
Merge remote-tracking branch 'origin/master' into kernel-test
commit 0239bcec1f6bb4a7209f28c743a8ec946930b725
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Thu Aug 14 16:28:30 2014 +0200
kernel: update to 3.10.53.
commit d156e682d4242c2255d34bf76fb82e144f22ea16
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Aug 8 08:58:28 2014 +0200
kernel: update to 3.10.52.
commit ee34ac456231034d90d12c30b07e18515d2496d2
Merge: af39690 2b23289
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Aug 8 08:52:52 2014 +0200
Merge branch 'master' into kernel-test
commit af39690185dedb82ad5ccfb88c574d04465ef12d
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Aug 1 20:34:21 2014 +0200
intel_kmod: update intel vendor modules.
commit a4c4d9c8197f1dc20d554003ed6abc3187c68ae1
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Fri Aug 1 13:19:59 2014 +0200
kernel: update to 3.10.51.
commit e544014348c27e4ab7c8b6e4f208ff4b21eaa2d3
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Jul 28 19:59:18 2014 +0200
kernel: update to 3.10.50.
commit e43d0fe67288cbb9cadf3552903da470f8043efd
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Jul 27 16:05:25 2014 +0200
kernel: enable bcma support.
some broadcom wlan adapter need this.
commit 0e20a6c670f0c66f0ac8a2634ef715ddfd98256a
Merge: 0d80881 5b861b0
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sat Jul 26 23:46:09 2014 +0200
Merge branch 'master' into kernel-test
commit 0d8088144007b7a2445f6652ec9eb4021dbca00f
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Jul 20 21:07:49 2014 +0200
kernel: update to 3.10.49.
commit ccb96d4fc5065cdf85fef7344ef1f9cf624fd309
Merge: 60984f8 7535861
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Sun Jul 20 21:06:11 2014 +0200
Merge branch 'master' into kernel-test
commit 60984f8c47974e2cfb4e8eb04a50b6a78ab6af18
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Thu Jul 10 12:25:22 2014 +0200
kernel: update to 3.10.48.
commit 46c1880c4fddbc8a7725d946e3ff8b462e77baea
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Mon Jul 7 10:18:08 2014 +0200
kernel: update to 3.10.47.
commit 0c36f63ca2f50aa8cd6c4e81a35e26e83d624dd6
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date: Tue Jul 1 10:17:29 2014 +0200
kernel: update to 3.10.46.
-----------------------------------------------------------------------
Summary of changes:
.../kernel/kernel.config.armv5tel-ipfire-kirkwood | 712 +-
config/kernel/kernel.config.armv5tel-ipfire-multi | 819 +-
config/kernel/kernel.config.armv5tel-ipfire-rpi | 2080 ++---
config/kernel/kernel.config.i586-ipfire | 594 +-
config/kernel/kernel.config.i586-ipfire-pae | 594 +-
config/rootfiles/common/i586/glibc | 1 +
config/rootfiles/common/i586/linux | 172 +-
config/rootfiles/common/i586/linux-headers | 19 +
config/rootfiles/common/i586/linux-initrd | 1 +
config/rootfiles/common/i586/linux-initrd-pae | 1 +
config/rootfiles/packages/linux-pae | 174 +-
lfs/cryptodev | 4 +-
lfs/e1000e | 6 +-
lfs/flash-images | 5 +-
lfs/igb | 4 +-
lfs/{igb => ixgbe} | 16 +-
lfs/linux | 123 +-
lfs/{rpi-firmware => linux-initrd} | 50 +-
make.sh | 11 +-
...0.55-rt2800usb-change_queue_warn_to_debug.patch | 30 +
src/patches/linux-3.10.57-mmc_add_eMMC_5.x.patch | 12 +
...filter.patch => linux-3.14-layer7-filter.patch} | 110 +-
...vbsky-wot2.patch => linux-3.14.22-dvbsky.patch} | 9125 ++++++++++----------
...linux-3.2-imq.patch => linux-3.14.22-imq.patch} | 994 ++-
....14.22-iwlwifi-noibss_only_on_radar_chan.patch} | 13 +-
25 files changed, 8772 insertions(+), 6898 deletions(-)
create mode 100644 config/rootfiles/common/i586/linux-initrd
create mode 100644 config/rootfiles/common/i586/linux-initrd-pae
copy lfs/{igb => ixgbe} (92%)
copy lfs/{rpi-firmware => linux-initrd} (74%)
create mode 100644 src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch
create mode 100644 src/patches/linux-3.10.57-mmc_add_eMMC_5.x.patch
copy src/patches/{linux-3.10-layer7-filter.patch => linux-3.14-layer7-filter.patch} (94%)
copy src/patches/{linux-3.9-dvbsky-wot2.patch => linux-3.14.22-dvbsky.patch} (84%)
copy src/patches/{linux-3.2-imq.patch => linux-3.14.22-imq.patch} (71%)
copy src/patches/{linux-3.10.34-iwlwifi-noibss_only_on_radar_chan.patch => linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch} (51%)
Difference in files:
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
index 9bc1d43..67d0d04 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
+++ b/config/kernel/kernel.config.armv5tel-ipfire-kirkwood
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.10.27-ipfire-kirkwood Kernel Configuration
+# Linux/arm 3.14.22 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -10,8 +10,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
@@ -26,16 +28,19 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -47,19 +52,17 @@ CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
-CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -78,6 +81,7 @@ CONFIG_HIGH_RES_TIMERS=y
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -95,6 +99,7 @@ CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
@@ -114,6 +119,7 @@ CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
@@ -126,11 +132,11 @@ CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
-CONFIG_HOTPLUG=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
@@ -163,12 +169,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -179,11 +187,19 @@ CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
@@ -203,7 +219,7 @@ CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
@@ -213,12 +229,14 @@ CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
@@ -236,6 +254,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
@@ -254,6 +273,7 @@ CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y
#
@@ -284,8 +304,8 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_MSM_NODT is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
@@ -294,8 +314,6 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_GPIO_PCA953X is not set
@@ -304,26 +322,17 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
#
# Marvell Kirkwood Implementations
#
+CONFIG_KIRKWOOD_LEGACY=y
CONFIG_MACH_D2NET_V2=y
-CONFIG_MACH_DB88F6281_BP=y
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_INETSPACE_V2=y
-CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_NET2BIG_V2=y
CONFIG_MACH_NET5BIG_V2=y
-CONFIG_MACH_NETSPACE_MAX_V2=y
-CONFIG_MACH_NETSPACE_V2=y
CONFIG_MACH_OPENRD=y
CONFIG_MACH_OPENRD_BASE=y
CONFIG_MACH_OPENRD_CLIENT=y
CONFIG_MACH_OPENRD_ULTIMATE=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
-CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
-CONFIG_MACH_DREAMPLUG=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
@@ -331,30 +340,7 @@ CONFIG_MACH_TS41X=y
# Device tree entries
#
CONFIG_ARCH_KIRKWOOD_DT=y
-CONFIG_MACH_CLOUDBOX_DT=y
-CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
-CONFIG_MACH_LSXL_DT=y
-CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
-CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
-CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_TOPKICK_DT=y
-CONFIG_MACH_TS219_DT=y
-CONFIG_MACH_ICONNECT=y
-CONFIG_MACH_NAS6210=y
+CONFIG_MACH_MV88F6281GTW_GE_DT=y
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_ORION=y
CONFIG_PLAT_ORION_LEGACY=y
@@ -389,12 +375,14 @@ CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_NR_BANKS=8
+CONFIG_MULTI_IRQ_HANDLER=y
#
# Bus support
#
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
@@ -402,6 +390,21 @@ CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
+
+#
+# PCI host controller drivers
+#
+CONFIG_PCI_MVEBU=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
@@ -427,6 +430,13 @@ CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
@@ -437,16 +447,18 @@ CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
@@ -454,11 +466,15 @@ CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
#
# Boot options
@@ -485,6 +501,34 @@ CONFIG_AUTO_ZRELADDR=y
#
# CPU Power Management
#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+# CONFIG_GENERIC_CPUFREQ_CPU0 is not set
+
+#
+# ARM CPU frequency scaling drivers
+#
+CONFIG_ARM_KIRKWOOD_CPUFREQ=y
+
+#
+# CPU Idle
+#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
@@ -511,12 +555,20 @@ CONFIG_COREDUMP=y
#
# Power management options
#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=y
CONFIG_PM_CLK=y
-# CONFIG_ARM_CPU_SUSPEND is not set
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_CPU_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y
#
@@ -553,7 +605,6 @@ CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
@@ -586,7 +637,6 @@ CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -600,6 +650,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
@@ -663,7 +714,22 @@ CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
@@ -708,6 +774,7 @@ CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -724,8 +791,12 @@ CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -744,8 +815,6 @@ CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_LAYER7=m
-# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -760,7 +829,9 @@ CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
@@ -811,6 +882,11 @@ CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -818,6 +894,7 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -843,6 +920,10 @@ CONFIG_IP_NF_MATCH_IPP2P=m
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -856,12 +937,14 @@ CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -886,7 +969,6 @@ CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
@@ -928,6 +1010,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
+CONFIG_6LOWPAN_IPHC=m
CONFIG_NET_SCHED=y
#
@@ -953,6 +1036,8 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
@@ -972,6 +1057,7 @@ CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
@@ -1001,10 +1087,16 @@ CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=y
+CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
-CONFIG_NETPRIO_CGROUP=m
+CONFIG_NET_MPLS_GSO=m
+CONFIG_HSR=m
+CONFIG_CGROUP_NET_PRIO=m
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
@@ -1114,12 +1206,12 @@ CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
-# CONFIG_CMA is not set
#
# Bus devices
#
CONFIG_MVEBU_MBUS=y
+# CONFIG_ARM_CCI is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
@@ -1133,7 +1225,6 @@ CONFIG_MTD_OF_PARTS=y
#
# User Modules And Translation Layers
#
-# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
@@ -1196,9 +1287,9 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
@@ -1223,13 +1314,12 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
@@ -1240,6 +1330,7 @@ CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_CISS_DA=m
@@ -1273,7 +1364,6 @@ CONFIG_BLK_DEV_RSXX=m
# CONFIG_ATMEL_PWM is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
@@ -1318,6 +1408,14 @@ CONFIG_TI_ST=m
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -1381,7 +1479,6 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
@@ -1395,6 +1492,7 @@ CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_TASKLET=y
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
@@ -1443,7 +1541,7 @@ CONFIG_SCSI_DC390T=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_SRP is not set
-CONFIG_SCSI_BFA_FC=m
+# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
@@ -1485,6 +1583,7 @@ CONFIG_SATA_HIGHBANK=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
+CONFIG_SATA_RCAR=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
@@ -1562,13 +1661,14 @@ CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
-# CONFIG_BCACHE_EDEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
+CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
-CONFIG_DM_BUFIO=m
+CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
@@ -1576,8 +1676,8 @@ CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
@@ -1586,6 +1686,7 @@ CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
@@ -1611,12 +1712,12 @@ CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_NETDEVICES=y
+CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
-CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
@@ -1635,6 +1736,7 @@ CONFIG_IMQ_BEHAVIOR_AB=y
CONFIG_IMQ_NUM_DEVS=2
CONFIG_TUN=m
CONFIG_VETH=m
+CONFIG_NLMON=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
@@ -1680,6 +1782,8 @@ CONFIG_ACENIC=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_ARC_EMAC=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
@@ -1754,12 +1858,17 @@ CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBEVF=m
+CONFIG_I40E=m
+CONFIG_I40E_VXLAN=y
+CONFIG_I40EVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=m
CONFIG_MVMDIO=m
+CONFIG_MVNETA=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
@@ -1768,6 +1877,7 @@ CONFIG_SKY2=m
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
@@ -1785,7 +1895,6 @@ CONFIG_NE2K_PCI=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
-CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
@@ -1802,6 +1911,7 @@ CONFIG_8139TOO=m
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
+CONFIG_SH_ETH=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
@@ -1906,8 +2016,11 @@ CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
@@ -1962,7 +2075,9 @@ CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
+# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set
+CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
@@ -1973,14 +2088,25 @@ CONFIG_CARL9170_WPC=y
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
+# CONFIG_WIL6210_TRACING is not set
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+# CONFIG_ATH10K_DEBUG is not set
+# CONFIG_ATH10K_DEBUGFS is not set
+# CONFIG_ATH10K_TRACING is not set
+CONFIG_WCN36XX=m
+# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_B43=m
+CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
@@ -1995,7 +2121,11 @@ CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
+# CONFIG_BRCM_TRACING is not set
+# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
@@ -2051,10 +2181,12 @@ CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
+CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
@@ -2063,14 +2195,17 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTLWIFI=m
-# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_PCI=m
+CONFIG_RTLWIFI_USB=m
+# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
@@ -2086,6 +2221,8 @@ CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
# CONFIG_MWIFIEX_PCIE is not set
CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -2167,8 +2304,8 @@ CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
#
@@ -2267,6 +2404,7 @@ CONFIG_INPUT_MISC=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -2277,7 +2415,6 @@ CONFIG_INPUT_CM109=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
-CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
@@ -2296,6 +2433,7 @@ CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_APBPS2=m
+# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_GAMEPORT is not set
#
@@ -2305,6 +2443,7 @@ CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
@@ -2324,7 +2463,6 @@ CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_STALDRV is not set
#
# Serial drivers
@@ -2348,6 +2486,7 @@ CONFIG_SERIAL_8250_RSA=y
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
+# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
@@ -2362,6 +2501,8 @@ CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
@@ -2388,7 +2529,16 @@ CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_MUX is not set
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
@@ -2424,7 +2574,6 @@ CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=m
-# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
@@ -2438,6 +2587,7 @@ CONFIG_I2C_SIMTEC=m
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
@@ -2450,11 +2600,6 @@ CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
-
-#
-# Qualcomm MSM SSBI bus support
-#
-# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
@@ -2489,7 +2634,6 @@ CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
-CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_PINCTRL=y
#
@@ -2499,15 +2643,15 @@ CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_CAPRI is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
CONFIG_PINCTRL_SINGLE=m
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_KIRKWOOD=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
@@ -2520,6 +2664,7 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_MVEBU=y
# CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_SCH311X is not set
CONFIG_GPIO_TS5500=m
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_GRGPIO is not set
@@ -2551,8 +2696,13 @@ CONFIG_GPIO_MCP23S08=m
#
#
+# LPC GPIO expanders:
+#
+
+#
# MODULbus GPIO expanders:
#
+# CONFIG_GPIO_BCM_KONA is not set
#
# USB GPIO expanders:
@@ -2608,8 +2758,9 @@ CONFIG_CHARGER_88PM860X=m
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_QNAP=y
@@ -2645,10 +2796,12 @@ CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
@@ -2737,14 +2890,20 @@ CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_KIRKWOOD_THERMAL=m
+
+#
+# Texas Instruments thermal drivers
+#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -2753,12 +2912,14 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
+CONFIG_GPIO_WATCHDOG=m
# CONFIG_DW_WATCHDOG is not set
CONFIG_ORION_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=m
CONFIG_ALIM7101_WDT=m
CONFIG_I6300ESB_WDT=m
+CONFIG_MEN_A21_WDT=m
#
# PCI-based Watchdog Cards
@@ -2793,13 +2954,21 @@ CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
-# CONFIG_BCMA is not set
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+# CONFIG_BCMA_HOST_SOC is not set
+# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
+# CONFIG_BCMA_DRIVER_GPIO is not set
+# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
@@ -2807,6 +2976,7 @@ CONFIG_MFD_CORE=y
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
@@ -2814,9 +2984,11 @@ CONFIG_MFD_CORE=y
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
+# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
@@ -2839,6 +3011,7 @@ CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
@@ -2867,26 +3040,30 @@ CONFIG_MFD_VX855=m
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
+# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_GPIO is not set
+# CONFIG_REGULATOR_88PM800 is not set
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
-CONFIG_REGULATOR_88PM8607=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-CONFIG_REGULATOR_LP8755=m
+# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
@@ -2918,7 +3095,6 @@ CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
@@ -2996,6 +3172,7 @@ CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
@@ -3012,7 +3189,7 @@ CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
-CONFIG_USB_SN9C102=m
+CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
@@ -3024,8 +3201,9 @@ CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_STK1160=m
+CONFIG_VIDEO_STK1160_COMMON=m
# CONFIG_VIDEO_STK1160_AC97 is not set
+CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
@@ -3094,6 +3272,7 @@ CONFIG_DVB_B2C2_FLEXCOP_USB=m
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
@@ -3126,6 +3305,7 @@ CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
@@ -3160,12 +3340,15 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_SCALE_CROP=m
CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_V4L_TEST_DRIVERS is not set
#
@@ -3193,7 +3376,6 @@ CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
-# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
@@ -3257,7 +3439,12 @@ CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
-# Miscelaneous helper chips
+# Audio/Video compression chips
+#
+CONFIG_VIDEO_SAA6752HS=m
+
+#
+# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
@@ -3308,6 +3495,7 @@ CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
@@ -3319,6 +3507,7 @@ CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
@@ -3349,8 +3538,7 @@ CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
-CONFIG_DVB_M88DS3103=m
-CONFIG_DVB_M88DC2800=m
+CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
@@ -3432,6 +3620,8 @@ CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
+CONFIG_DVB_DVBSKY_M88DS3103=m
+CONFIG_DVB_M88DC2800=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
@@ -3450,6 +3640,7 @@ CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
#
@@ -3470,8 +3661,12 @@ CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_RCAR_DU is not set
+# CONFIG_DRM_SHMOBILE is not set
# CONFIG_DRM_TILCDC is not set
# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_BOCHS is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_HDMI=y
@@ -3504,6 +3699,7 @@ CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
+# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -3546,9 +3742,12 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
-# CONFIG_BACKLIGHT_LM3630 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
#
# Console display driver support
@@ -3557,9 +3756,6 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -3585,6 +3781,7 @@ CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
@@ -3613,7 +3810,6 @@ CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3657,9 +3853,7 @@ CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
@@ -3668,19 +3862,19 @@ CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
@@ -3714,8 +3908,10 @@ CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_DICE=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
@@ -3723,11 +3919,9 @@ CONFIG_SND_SOC=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_KIRKWOOD_SOC=m
-CONFIG_SND_KIRKWOOD_SOC_I2S=m
CONFIG_SND_KIRKWOOD_SOC_OPENRD=m
CONFIG_SND_KIRKWOOD_SOC_T5325=m
CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SIMPLE_CARD=m
@@ -3759,8 +3953,10 @@ CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
+CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
@@ -3792,7 +3988,6 @@ CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
@@ -3808,6 +4003,7 @@ CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
@@ -3823,9 +4019,7 @@ CONFIG_USB_HIDDEV=y
# I2C HID support
#
CONFIG_I2C_HID=m
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -3852,7 +4046,6 @@ CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
@@ -3863,11 +4056,11 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
@@ -3875,7 +4068,9 @@ CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
+# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_SSB=m
+# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
@@ -3914,9 +4109,22 @@ CONFIG_USB_STORAGE_ENE_UB6250=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
+# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
+
+#
+# Platform Glue Driver Support
+#
+# CONFIG_USB_DWC3_EXYNOS is not set
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_KEYSTONE=m
+
+#
+# Debugging features
+#
# CONFIG_USB_DWC3_DEBUG is not set
+# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set
@@ -3927,6 +4135,7 @@ CONFIG_USB_CHIPIDEA=m
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@@ -3937,7 +4146,6 @@ CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -3956,16 +4164,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_MXUPORT=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
@@ -3975,9 +4181,7 @@ CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
@@ -4006,6 +4210,7 @@ CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
@@ -4015,7 +4220,20 @@ CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
+
+#
+# USB Physical Layer drivers
+#
# CONFIG_USB_PHY is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_RCAR_PHY is not set
+# CONFIG_USB_ULPI is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
@@ -4042,6 +4260,7 @@ CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
CONFIG_MMC_SDHCI_PXAV3=m
CONFIG_MMC_SDHCI_PXAV2=m
CONFIG_MMC_TIFM_SD=m
@@ -4052,6 +4271,7 @@ CONFIG_MMC_DW=m
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
+# CONFIG_MMC_DW_K3 is not set
CONFIG_MMC_DW_PCI=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
@@ -4064,6 +4284,7 @@ CONFIG_MEMSTICK=m
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
+CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
@@ -4089,15 +4310,16 @@ CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
# CONFIG_LEDS_PCA955X is not set
-CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_PCA9685=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_NS2=m
CONFIG_LEDS_NETXBIG=m
-# CONFIG_LEDS_RENESAS_TPU is not set
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
@@ -4149,11 +4371,14 @@ CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
@@ -4194,6 +4419,7 @@ CONFIG_RTC_DRV_DS2404=m
#
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_SNVS=m
+CONFIG_RTC_DRV_MOXART=m
#
# HID Sensor RTC drivers
@@ -4206,7 +4432,9 @@ CONFIG_DMADEVICES=y
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
CONFIG_MV_XOR=y
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y
@@ -4217,16 +4445,17 @@ CONFIG_DMA_OF=y
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
+# CONFIG_UIO_MF624 is not set
CONFIG_VIRT_DRIVERS=y
#
@@ -4248,14 +4477,16 @@ CONFIG_USBIP_HOST=m
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8821AE is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_RTS5208 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
@@ -4330,10 +4561,7 @@ CONFIG_RTS5139=m
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_GPIO_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
@@ -4355,13 +4583,19 @@ CONFIG_RTS5139=m
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
-# CONFIG_CSR_WIFI is not set
+CONFIG_LTE_GDM724X=m
CONFIG_NET_VENDOR_SILICOM=y
CONFIG_SBYPASS=m
CONFIG_BPCTL=m
CONFIG_CED1401=m
# CONFIG_DGRP is not set
CONFIG_FIREWIRE_SERIAL=m
+CONFIG_FWTTY_MAX_TOTAL_PORTS=64
+CONFIG_FWTTY_MAX_CARD_PORTS=32
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_DGNC is not set
+# CONFIG_DGAP is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
@@ -4369,15 +4603,18 @@ CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
-# CONFIG_COMMON_CLK_DEBUG is not set
CONFIG_COMMON_CLK_SI5351=m
-CONFIG_MVEBU_CLK_CORE=y
-CONFIG_MVEBU_CLK_GATING=y
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_KIRKWOOD_CLK=y
#
# Hardware Spinlock drivers
#
+CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
+CONFIG_ORION_TIMER=y
CONFIG_MAILBOX=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
@@ -4393,6 +4630,7 @@ CONFIG_OF_IOMMU=y
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
+# CONFIG_MVEBU_DEVBUS is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
@@ -4403,6 +4641,7 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
+# CONFIG_BMA180 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
@@ -4411,6 +4650,8 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# CONFIG_EXYNOS_ADC is not set
# CONFIG_MAX1363 is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_VIPERBOARD_ADC is not set
@@ -4423,7 +4664,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
-# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
#
# Digital to analog converters
@@ -4454,6 +4694,11 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_ITG3200 is not set
#
+# Humidity sensors
+#
+CONFIG_DHT11=m
+
+#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
@@ -4462,22 +4707,65 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# Light sensors
#
# CONFIG_ADJD_S311 is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_SENSORS_LM3533 is not set
+# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
-# CONFIG_HID_SENSOR_ALS is not set
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
+# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
+
+#
+# Inclinometer sensors
+#
+# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
+
+#
+# Triggers - standalone
+#
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_MPL3115 is not set
+# CONFIG_IIO_ST_PRESS is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_TMP006 is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_PCA9685 is not set
CONFIG_IRQCHIP=y
+CONFIG_ORION_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
-# CONFIG_RESET_CONTROLLER is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+CONFIG_PHY_MVEBU_SATA=y
+# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
#
# File systems
@@ -4512,6 +4800,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
+CONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
@@ -4532,7 +4821,6 @@ CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
#
# Caches
@@ -4614,10 +4902,13 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="ipfire.org"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
@@ -4626,6 +4917,7 @@ CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
@@ -4709,59 +5001,83 @@ CONFIG_DLM=m
#
# Kernel hacking
#
+
+#
+# printk and dmesg options
+#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
@@ -4769,13 +5085,9 @@ CONFIG_FRAME_POINTER=y
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -4811,29 +5123,49 @@ CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_ARM_PTDUMP is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_NONE=y
+# CONFIG_DEBUG_LL_UART_NONE is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_LL_UART_8250 is not set
+CONFIG_DEBUG_LL_UART_PL01X=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0xf1012000
+CONFIG_DEBUG_UART_VIRT=0xfed12000
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_SET_MODULE_RONX=y
#
# Security options
@@ -4891,13 +5223,14 @@ CONFIG_PAX_USERCOPY=y
# Memory Protections
#
# CONFIG_GRKERNSEC_KMEM is not set
-CONFIG_GRKERNSEC_JIT_HARDEN=y
# CONFIG_GRKERNSEC_PERF_HARDEN is not set
CONFIG_GRKERNSEC_RAND_THREADSTACK=y
CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
+CONFIG_GRKERNSEC_RANDSTRUCT=y
+CONFIG_GRKERNSEC_RANDSTRUCT_PERFORMANCE=y
CONFIG_GRKERNSEC_KERN_LOCKOUT=y
#
@@ -4956,12 +5289,12 @@ CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
+CONFIG_GRKERNSEC_HARDEN_IPC=y
# CONFIG_GRKERNSEC_TPE is not set
#
# Network Protections
#
-CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set
@@ -4982,6 +5315,8 @@ CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=6
CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
@@ -5064,6 +5399,7 @@ CONFIG_CRYPTO_VMAC=m
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -5108,6 +5444,8 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
@@ -5116,6 +5454,7 @@ CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_MV_CESA=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
@@ -5134,8 +5473,10 @@ CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
@@ -5150,10 +5491,14 @@ CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=m
+CONFIG_LZ4HC_COMPRESS=m
+CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
@@ -5168,10 +5513,12 @@ CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
@@ -5186,9 +5533,8 @@ CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
CONFIG_VIRTUALIZATION=y
-CONFIG_KVM_ARM_MAX_VCPUS=0
-
-#
-# Virtio drivers
-#
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-multi b/config/kernel/kernel.config.armv5tel-ipfire-multi
index 34045f2..110c199 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-multi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-multi
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.10.32 Kernel Configuration
+# Linux/arm 3.14.22 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_MIGHT_HAVE_PCI=y
@@ -12,6 +12,7 @@ CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
@@ -28,16 +29,19 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -49,19 +53,17 @@ CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
-CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
@@ -76,6 +78,7 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
+# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -83,6 +86,7 @@ CONFIG_HIGH_RES_TIMERS=y
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -111,6 +115,7 @@ CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
@@ -133,6 +138,7 @@ CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
@@ -146,11 +152,11 @@ CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
-CONFIG_HOTPLUG=y
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
@@ -183,6 +189,8 @@ CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
@@ -190,22 +198,31 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
@@ -224,7 +241,7 @@ CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
@@ -234,12 +251,14 @@ CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
@@ -257,6 +276,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
@@ -276,6 +296,7 @@ CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
@@ -307,8 +328,8 @@ CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_MSM_NODT is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
@@ -317,8 +338,6 @@ CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
@@ -342,15 +361,18 @@ CONFIG_MACH_ARMADA_370_XP=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BERLIN is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_HI3xxx is not set
+# CONFIG_ARCH_KEYSTONE is not set
+# CONFIG_ARCH_MSM_DT is not set
CONFIG_ARCH_MXC=y
#
# Freescale i.MX support
#
-# CONFIG_MXC_IRQ_PRIOR is not set
CONFIG_MXC_TZIC=y
# CONFIG_MXC_DEBUG_BOARD is not set
CONFIG_HAVE_IMX_ANATOP=y
@@ -371,12 +393,14 @@ CONFIG_MACH_IMX51_DT=y
#
# Device tree only
#
+# CONFIG_SOC_IMX50 is not set
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+# CONFIG_SOC_VF610 is not set
CONFIG_IMX_HAVE_PLATFORM_FEC=y
CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y
CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y
-CONFIG_WAND_RFKILL=m
#
# TI OMAP Common Features
@@ -396,6 +420,12 @@ CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_OMAP5=y
+CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
+CONFIG_SOC_DRA7XX=y
CONFIG_ARCH_OMAP2PLUS=y
#
@@ -404,20 +434,13 @@ CONFIG_ARCH_OMAP2PLUS=y
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_SOC_OMAP5=y
CONFIG_SOC_OMAP3430=y
CONFIG_SOC_TI81XX=y
-CONFIG_SOC_AM33XX=y
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y
-CONFIG_OMAP_PACKAGE_CBP=y
-CONFIG_OMAP_PACKAGE_CBL=y
-CONFIG_OMAP_PACKAGE_CBS=y
#
-# OMAP Board Type
+# OMAP Legacy Platform Data Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_DEVKIT8000=y
@@ -425,31 +448,25 @@ CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OMAP3530_LV_SOM=y
CONFIG_MACH_OMAP3_TORPEDO=y
CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3EVM=y
CONFIG_MACH_OMAP3517EVM=y
# CONFIG_MACH_CRANEBOARD is not set
CONFIG_MACH_OMAP3_PANDORA=y
CONFIG_MACH_TOUCHBOOK=y
CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_RM680=y
CONFIG_MACH_NOKIA_RX51=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_MACH_OMAP_ZOOM3=y
CONFIG_MACH_CM_T35=y
CONFIG_MACH_CM_T3517=y
CONFIG_MACH_CM_T3730=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_MACH_IGEP0030=y
CONFIG_MACH_SBC3530=y
-CONFIG_MACH_OMAP_3630SDP=y
CONFIG_MACH_TI8168EVM=y
CONFIG_MACH_TI8148EVM=y
-CONFIG_MACH_OMAP_4430SDP=y
-CONFIG_MACH_OMAP4_PANDA=y
# CONFIG_OMAP3_EMU is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+CONFIG_ARCH_ROCKCHIP=y
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_STI is not set
+# CONFIG_ARCH_SHMOBILE_MULTI is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TEGRA is not set
@@ -461,6 +478,7 @@ CONFIG_ARCH_VEXPRESS=y
#
CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
+# CONFIG_ARCH_VEXPRESS_SPC is not set
CONFIG_PLAT_VERSATILE_CLCD=y
CONFIG_PLAT_VERSATILE_SCHED_CLOCK=y
CONFIG_ARCH_VIRT=y
@@ -497,6 +515,7 @@ CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
@@ -509,6 +528,7 @@ CONFIG_CACHE_PL310=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_PJ4B_ERRATA_4742=y
@@ -523,8 +543,10 @@ CONFIG_ARM_ERRATA_754327=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_PL310_ERRATA_769419=y
CONFIG_ARM_ERRATA_775420=y
-# CONFIG_ARM_ERRATA_798181 is not set
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_ARM_ERRATA_773022=y
CONFIG_ICST=y
+CONFIG_TI_PRIV_EDMA=y
#
# Bus support
@@ -533,6 +555,7 @@ CONFIG_ARM_AMBA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
@@ -543,8 +566,19 @@ CONFIG_PCI_SYSCALL=y
#
# PCI host controller drivers
#
+CONFIG_PCI_MVEBU=y
CONFIG_PCIE_DW=y
CONFIG_PCI_IMX6=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+CONFIG_PCIE_PME=y
# CONFIG_PCCARD is not set
#
@@ -560,6 +594,7 @@ CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_MCPM is not set
+# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
@@ -567,11 +602,17 @@ CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_ARM_PSCI=y
-CONFIG_LOCAL_TIMERS=y
CONFIG_ARCH_NR_GPIO=512
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
@@ -584,9 +625,11 @@ CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HW_PERF_EVENTS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
@@ -601,10 +644,15 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
+CONFIG_CMA=y
+CONFIG_CMA_DEBUG=y
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_SECCOMP is not set
-CONFIG_CC_STACKPROTECTOR=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
# CONFIG_XEN is not set
#
@@ -635,7 +683,6 @@ CONFIG_AUTO_ZRELADDR=y
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
@@ -654,14 +701,13 @@ CONFIG_GENERIC_CPUFREQ_CPU0=y
#
# ARM CPU frequency scaling drivers
#
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set
CONFIG_ARM_IMX6Q_CPUFREQ=m
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
+
+#
+# CPU Idle
+#
# CONFIG_CPU_IDLE is not set
CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
@@ -675,6 +721,7 @@ CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
+# CONFIG_KERNEL_MODE_NEON is not set
#
# Userspace binary formats
@@ -703,6 +750,7 @@ CONFIG_APM_EMULATION=y
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
@@ -742,7 +790,6 @@ CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
@@ -775,7 +822,6 @@ CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -789,6 +835,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
@@ -852,7 +899,22 @@ CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
@@ -897,6 +959,7 @@ CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -913,8 +976,12 @@ CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -933,8 +1000,6 @@ CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_LAYER7=m
-# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -949,7 +1014,9 @@ CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
@@ -1000,6 +1067,11 @@ CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -1007,6 +1079,7 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -1032,6 +1105,10 @@ CONFIG_IP_NF_MATCH_IPP2P=m
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -1045,12 +1122,14 @@ CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -1075,7 +1154,6 @@ CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
@@ -1117,6 +1195,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
+CONFIG_6LOWPAN_IPHC=m
CONFIG_NET_SCHED=y
#
@@ -1142,6 +1221,8 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
@@ -1161,6 +1242,7 @@ CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
@@ -1190,15 +1272,22 @@ CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=y
+CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
-CONFIG_NETPRIO_CGROUP=m
+CONFIG_CGROUP_NET_PRIO=m
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
+CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
@@ -1308,26 +1397,16 @@ CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_CMA=y
-CONFIG_CMA_DEBUG=y
-
-#
-# Default contiguous memory area size:
-#
-CONFIG_CMA_SIZE_MBYTES=16
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
+# CONFIG_DMA_CMA is not set
#
# Bus devices
#
+# CONFIG_IMX_WEIM is not set
CONFIG_MVEBU_MBUS=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_OMAP_INTERCONNECT=y
+# CONFIG_ARM_CCI is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
@@ -1341,7 +1420,6 @@ CONFIG_MTD_OF_PARTS=y
#
# User Modules And Translation Layers
#
-# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
@@ -1392,8 +1470,6 @@ CONFIG_MTD_CFI_I2=y
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
-CONFIG_BCH_CONST_M=13
-CONFIG_BCH_CONST_T=8
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
@@ -1403,17 +1479,15 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=m
-CONFIG_MTD_NAND_OMAP_BCH8=y
-# CONFIG_MTD_NAND_OMAP_BCH4 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_DOCG4 is not set
# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PXA3xx=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_GPMI_NAND=m
# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_NAND_MXC=m
# CONFIG_MTD_ONENAND is not set
@@ -1439,13 +1513,12 @@ CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
@@ -1453,6 +1526,7 @@ CONFIG_PARPORT=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -1484,7 +1558,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_ATMEL_PWM is not set
CONFIG_DUMMY_IRQ=m
# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=m
@@ -1515,6 +1588,7 @@ CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
+CONFIG_EEPROM_SUNXI_SID=y
# CONFIG_CB710_CORE is not set
#
@@ -1527,6 +1601,14 @@ CONFIG_TI_ST=m
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -1590,7 +1672,6 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
@@ -1604,6 +1685,7 @@ CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
@@ -1647,7 +1729,7 @@ CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
-CONFIG_SCSI_BFA_FC=m
+# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
@@ -1670,6 +1752,7 @@ CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_IMX=m
+CONFIG_AHCI_SUNXI=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
@@ -1691,6 +1774,7 @@ CONFIG_SATA_HIGHBANK=m
CONFIG_SATA_MV=m
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_RCAR=m
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
@@ -1768,14 +1852,14 @@ CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
-# CONFIG_BCACHE_EDEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
-CONFIG_DM_BUFIO=m
+CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
@@ -1783,8 +1867,8 @@ CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
@@ -1793,6 +1877,7 @@ CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
@@ -1806,12 +1891,12 @@ CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
-CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
@@ -1830,6 +1915,7 @@ CONFIG_IMQ_BEHAVIOR_AB=y
CONFIG_IMQ_NUM_DEVS=2
CONFIG_TUN=m
CONFIG_VETH=m
+CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
@@ -1874,12 +1960,16 @@ CONFIG_NET_VENDOR_3COM=y
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_NET_VENDOR_ALLWINNER=y
+CONFIG_SUN4I_EMAC=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_ARC_EMAC=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
@@ -1954,6 +2044,10 @@ CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
+CONFIG_IXGBEVF=m
+CONFIG_I40E=m
+CONFIG_I40E_VXLAN=y
+CONFIG_I40EVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=m
CONFIG_JME=m
@@ -1970,6 +2064,7 @@ CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
+# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
@@ -1987,7 +2082,6 @@ CONFIG_NE2K_PCI=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
-CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
@@ -2005,6 +2099,7 @@ CONFIG_8139TOO=m
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
+CONFIG_SH_ETH=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
@@ -2026,6 +2121,7 @@ CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=y
+CONFIG_DWMAC_SUNXI=y
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
@@ -2040,6 +2136,7 @@ CONFIG_NET_VENDOR_TI=y
CONFIG_TI_DAVINCI_EMAC=m
CONFIG_TI_DAVINCI_MDIO=m
CONFIG_TI_DAVINCI_CPDMA=m
+CONFIG_TI_CPSW_PHY_SEL=y
CONFIG_TI_CPSW=m
CONFIG_TI_CPTS=y
CONFIG_TLAN=m
@@ -2053,6 +2150,8 @@ CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_XILINX_EMACLITE=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
@@ -2080,9 +2179,11 @@ CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
+CONFIG_MDIO_SUN4I=m
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m
+CONFIG_GATEWORKS_GW16083=m
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
@@ -2113,8 +2214,11 @@ CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
@@ -2167,7 +2271,9 @@ CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
+# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set
+CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
@@ -2177,14 +2283,24 @@ CONFIG_CARL9170_WPC=y
# CONFIG_ATH6KL is not set
CONFIG_AR5523=m
# CONFIG_WIL6210 is not set
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+# CONFIG_ATH10K_DEBUG is not set
+# CONFIG_ATH10K_DEBUGFS is not set
+# CONFIG_ATH10K_TRACING is not set
+CONFIG_WCN36XX=m
+# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_B43=m
+CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
@@ -2200,6 +2316,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_USB is not set
@@ -2231,7 +2348,6 @@ CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
@@ -2266,6 +2382,7 @@ CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
@@ -2276,14 +2393,17 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTLWIFI=m
-# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_PCI=m
+CONFIG_RTLWIFI_USB=m
+# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
@@ -2299,6 +2419,8 @@ CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -2379,8 +2501,8 @@ CONFIG_HISAX_HFC4S8S=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
#
@@ -2443,6 +2565,7 @@ CONFIG_KEYBOARD_IMX=m
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TWL4030=m
# CONFIG_KEYBOARD_XTKBD is not set
@@ -2475,6 +2598,7 @@ CONFIG_INPUT_MISC=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
+CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -2483,11 +2607,11 @@ CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_RETU_PWRBUTTON=m
+CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
-CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
@@ -2507,6 +2631,7 @@ CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_APBPS2=m
+CONFIG_SERIO_OLPC_APSP=m
# CONFIG_GAMEPORT is not set
#
@@ -2535,7 +2660,6 @@ CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_STALDRV is not set
#
# Serial drivers
@@ -2565,6 +2689,9 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_SH_SCI=m
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -2581,6 +2708,8 @@ CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
+CONFIG_SERIAL_FSL_LPUART=m
+CONFIG_SERIAL_ST_ASC=m
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
@@ -2595,6 +2724,8 @@ CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_ATMEL=m
+CONFIG_HW_RANDOM_OMAP=y
+CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_EXYNOS=m
CONFIG_NVRAM=y
CONFIG_R3964=m
@@ -2607,7 +2738,16 @@ CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_MUX is not set
+CONFIG_I2C_MUX=y
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_ARB_GPIO_CHALLENGE=m
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
@@ -2644,7 +2784,6 @@ CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=m
CONFIG_I2C_IMX=m
-# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_NOMADIK=y
# CONFIG_I2C_OCORES is not set
@@ -2653,6 +2792,7 @@ CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_VERSATILE=m
+CONFIG_I2C_WMT=m
# CONFIG_I2C_XILINX is not set
#
@@ -2661,6 +2801,7 @@ CONFIG_I2C_VERSATILE=m
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
@@ -2673,11 +2814,6 @@ CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
-
-#
-# Qualcomm MSM SSBI bus support
-#
-# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
@@ -2712,7 +2848,6 @@ CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
-CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_PINCTRL=y
#
@@ -2722,14 +2857,17 @@ CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_CAPRI is not set
CONFIG_PINCTRL_IMX=y
CONFIG_PINCTRL_IMX51=y
CONFIG_PINCTRL_IMX53=y
CONFIG_PINCTRL_IMX6Q=y
+CONFIG_PINCTRL_IMX6SL=y
+CONFIG_PINCTRL_MSM=y
+CONFIG_PINCTRL_MSM8X74=m
+CONFIG_PINCTRL_ROCKCHIP=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_SUNXI=y
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_370=y
CONFIG_PINCTRL_ARMADA_XP=y
@@ -2738,8 +2876,8 @@ CONFIG_PINCTRL_WM8850=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
@@ -2754,7 +2892,9 @@ CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
CONFIG_GPIO_PL061=y
# CONFIG_GPIO_RCAR is not set
+CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_TS5500=m
+# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_GRGPIO is not set
@@ -2786,8 +2926,13 @@ CONFIG_GPIO_MCP23S08=m
#
#
+# LPC GPIO expanders:
+#
+
+#
# MODULbus GPIO expanders:
#
+# CONFIG_GPIO_BCM_KONA is not set
#
# USB GPIO expanders:
@@ -2839,6 +2984,7 @@ CONFIG_BATTERY_88PM860X=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_CHARGER_88PM860X=m
# CONFIG_BATTERY_RX51 is not set
# CONFIG_CHARGER_ISP1704 is not set
@@ -2848,8 +2994,9 @@ CONFIG_CHARGER_TWL4030=y
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_QNAP=y
@@ -2886,10 +3033,12 @@ CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
@@ -2980,6 +3129,7 @@ CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
@@ -2990,6 +3140,15 @@ CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_IMX_THERMAL=m
CONFIG_ARMADA_THERMAL=m
+
+#
+# Texas Instruments thermal drivers
+#
+CONFIG_TI_SOC_THERMAL=m
+CONFIG_TI_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -2998,16 +3157,18 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
+CONFIG_GPIO_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=m
# CONFIG_DW_WATCHDOG is not set
-CONFIG_MPCORE_WATCHDOG=m
CONFIG_OMAP_WATCHDOG=m
+CONFIG_SUNXI_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_IMX2_WDT=m
CONFIG_RETU_WATCHDOG=m
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
+CONFIG_MEN_A21_WDT=m
#
# PCI-based Watchdog Cards
@@ -3042,20 +3203,30 @@ CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
-# CONFIG_BCMA is not set
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
+CONFIG_MFD_AXP20X=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
@@ -3063,9 +3234,11 @@ CONFIG_MFD_CORE=y
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
+# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
@@ -3089,6 +3262,7 @@ CONFIG_ABX500_CORE=y
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_OMAP_USB_HOST=y
# CONFIG_MFD_PALMAS is not set
@@ -3124,25 +3298,30 @@ CONFIG_MFD_LM3533=m
CONFIG_VEXPRESS_CONFIG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_GPIO is not set
+CONFIG_REGULATOR_88PM800=m
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_ANATOP=m
+CONFIG_REGULATOR_AXP20X=y
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
-CONFIG_REGULATOR_88PM8607=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-CONFIG_REGULATOR_LP8755=m
+CONFIG_REGULATOR_PFUZE100=y
+# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
@@ -3176,7 +3355,6 @@ CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
@@ -3209,6 +3387,7 @@ CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_SUNXI=m
CONFIG_MEDIA_USB_SUPPORT=y
#
@@ -3254,6 +3433,7 @@ CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
@@ -3270,7 +3450,7 @@ CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
-CONFIG_USB_SN9C102=m
+CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
@@ -3282,8 +3462,9 @@ CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_STK1160=m
+CONFIG_VIDEO_STK1160_COMMON=m
# CONFIG_VIDEO_STK1160_AC97 is not set
+CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
@@ -3352,6 +3533,7 @@ CONFIG_DVB_B2C2_FLEXCOP_USB=m
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
@@ -3384,6 +3566,7 @@ CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
@@ -3421,15 +3604,19 @@ CONFIG_VIDEO_OMAP2_VOUT_VRFB=y
CONFIG_VIDEO_OMAP2_VOUT=y
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_SCALE_CROP=m
CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=m
+CONFIG_VIDEO_RCAR_VIN=m
# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_CODA is not set
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_TI_VPE=m
+# CONFIG_VIDEO_TI_VPE_DEBUG is not set
# CONFIG_V4L_TEST_DRIVERS is not set
#
@@ -3456,7 +3643,6 @@ CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
-# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
@@ -3519,7 +3705,12 @@ CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
-# Miscelaneous helper chips
+# Audio/Video compression chips
+#
+CONFIG_VIDEO_SAA6752HS=m
+
+#
+# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
@@ -3570,6 +3761,7 @@ CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
@@ -3581,6 +3773,7 @@ CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
@@ -3611,8 +3804,7 @@ CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
-CONFIG_DVB_M88DS3103=m
-CONFIG_DVB_M88DC2800=m
+CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
@@ -3693,6 +3885,8 @@ CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
+CONFIG_DVB_DVBSKY_M88DS3103=m
+CONFIG_DVB_M88DC2800=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
@@ -3711,6 +3905,7 @@ CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
@@ -3733,16 +3928,23 @@ CONFIG_DRM_EXYNOS_DMABUF=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_VIDI=y
CONFIG_DRM_EXYNOS_G2D=y
+CONFIG_DRM_EXYNOS_IPP=y
+CONFIG_DRM_EXYNOS_FIMC=y
+CONFIG_DRM_EXYNOS_ROTATOR=y
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
+CONFIG_DRM_ARMADA=m
+CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_SHMOBILE=m
CONFIG_DRM_OMAP=m
CONFIG_DRM_OMAP_NUM_CRTCS=2
CONFIG_DRM_TILCDC=m
# CONFIG_DRM_QXL is not set
-# CONFIG_TEGRA_HOST1X is not set
+# CONFIG_DRM_BOCHS is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_VIDEOMODE_HELPERS=y
@@ -3754,7 +3956,7 @@ CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
@@ -3773,10 +3975,12 @@ CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_ARMCLCD=m
+CONFIG_FB_IMX=m
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
+CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -3803,7 +4007,9 @@ CONFIG_FB_ARMCLCD=m
# CONFIG_FB_SM501 is not set
CONFIG_FB_SMSCUFX=m
# CONFIG_FB_UDL is not set
+CONFIG_FB_XILINX=m
# CONFIG_FB_GOLDFISH is not set
+CONFIG_FB_DA8XX=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
@@ -3816,7 +4022,6 @@ CONFIG_OMAP2_DSS=y
# CONFIG_OMAP2_DSS_DEBUG is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP4_DSS_HDMI_AUDIO=y
@@ -3829,13 +4034,16 @@ CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
CONFIG_FB_OMAP2_NUM_FBS=3
#
-# OMAP2/3 Display Device Drivers
+# OMAP Display Device Drivers (new device model)
#
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_TFP410=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_PICODLP=m
-CONFIG_PANEL_TAAL=m
+CONFIG_DISPLAY_ENCODER_TFP410=m
+CONFIG_DISPLAY_ENCODER_TPD12S015=m
+CONFIG_DISPLAY_CONNECTOR_DVI=m
+CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
+CONFIG_DISPLAY_PANEL_DPI=m
+CONFIG_DISPLAY_PANEL_DSI_CM=m
+CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
@@ -3847,11 +4055,13 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
-# CONFIG_BACKLIGHT_LM3630 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_TLC59108 is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
#
# Console display driver support
@@ -3860,9 +4070,6 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -3874,6 +4081,7 @@ CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
+CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
@@ -3888,6 +4096,7 @@ CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
@@ -3916,7 +4125,6 @@ CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
-CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3960,28 +4168,26 @@ CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
@@ -4015,22 +4221,32 @@ CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
CONFIG_SND_FIREWIRE=y
+CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_DICE=m
# CONFIG_SND_FIREWIRE_SPEAKERS is not set
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_DMAENGINE_PCM=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_ADI=m
+CONFIG_SND_SOC_ADI_AXI_I2S=m
+CONFIG_SND_SOC_ADI_AXI_SPDIF=m
CONFIG_SND_ATMEL_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m
+CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_SOC_FSL_SSI=m
-CONFIG_SND_SOC_FSL_UTILS=m
+CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_IMX_PCM=m
-CONFIG_SND_SOC_IMX_PCM_DMA=y
+CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_AUDMUX=m
+CONFIG_SND_SOC_IMX_WM8962=m
CONFIG_SND_SOC_IMX_SGTL5000=m
+CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_MCBSP=m
CONFIG_SND_OMAP_SOC_HDMI=m
@@ -4040,12 +4256,12 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_HDMI=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_OMAP_HDMI_CODEC=m
+CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TWL4030=m
+CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD=m
# CONFIG_SOUND_PRIME is not set
@@ -4076,8 +4292,10 @@ CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
@@ -4109,7 +4327,6 @@ CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
@@ -4125,6 +4342,7 @@ CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
@@ -4140,9 +4358,8 @@ CONFIG_USB_HIDDEV=y
# I2C HID support
#
CONFIG_I2C_HID=m
-CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -4179,6 +4396,8 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
+CONFIG_USB_FUSBH200_HCD=m
+CONFIG_USB_FOTG210_HCD=m
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC=y
@@ -4188,7 +4407,9 @@ CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_IMX21_HCD=y
+CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
+# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
@@ -4227,9 +4448,36 @@ CONFIG_USB_STORAGE_ENE_UB6250=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_TUSB6010=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_MUSB_UX500=m
+CONFIG_USB_MUSB_AM335X_CHILD=m
+# CONFIG_USB_UX500_DMA is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
+
+#
+# Platform Glue Driver Support
+#
+CONFIG_USB_DWC3_EXYNOS=m
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_KEYSTONE=m
+
+#
+# Debugging features
+#
# CONFIG_USB_DWC3_DEBUG is not set
+CONFIG_USB_DWC2=m
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_HOST=y
# CONFIG_USB_CHIPIDEA_DEBUG is not set
@@ -4240,6 +4488,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@@ -4250,7 +4499,6 @@ CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -4269,16 +4517,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_MXUPORT=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
@@ -4288,9 +4534,7 @@ CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
@@ -4319,6 +4563,7 @@ CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
@@ -4328,14 +4573,21 @@ CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
+
+#
+# USB Physical Layer drivers
+#
CONFIG_USB_PHY=y
-CONFIG_NOP_USB_XCEIV=m
+CONFIG_USB_OTG_FSM=m
+CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
-CONFIG_OMAP_USB2=y
CONFIG_OMAP_USB3=m
+CONFIG_AM335X_CONTROL_USB=m
+CONFIG_AM335X_PHY_USB=m
CONFIG_SAMSUNG_USBPHY=m
CONFIG_SAMSUNG_USB2PHY=m
CONFIG_SAMSUNG_USB3PHY=m
+CONFIG_TWL6030_USB=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_USB_ISP1301=m
CONFIG_USB_MXS_PHY=m
@@ -4365,6 +4617,7 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=m
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_PXAV3=m
CONFIG_MMC_SDHCI_PXAV2=m
@@ -4376,13 +4629,16 @@ CONFIG_MMC_MVSDIO=y
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_DW=m
-# CONFIG_MMC_DW_IDMAC is not set
+CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
+CONFIG_MMC_DW_SOCFPGA=m
+CONFIG_MMC_DW_K3=m
# CONFIG_MMC_DW_PCI is not set
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_WMT=m
+CONFIG_MMC_SUNXI=y
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
@@ -4391,6 +4647,7 @@ CONFIG_MEMSTICK=m
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
+CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
@@ -4416,17 +4673,19 @@ CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_PCA9685=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_RENESAS_TPU=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TLC59116=m
#
# LED Triggers
@@ -4474,11 +4733,14 @@ CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
+CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
@@ -4523,9 +4785,11 @@ CONFIG_RTC_DRV_OMAP=y
CONFIG_RTC_DRV_PL030=m
CONFIG_RTC_DRV_PL031=m
CONFIG_RTC_DRV_VT8500=m
+CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_MXC=m
CONFIG_RTC_DRV_SNVS=m
+CONFIG_RTC_DRV_MOXART=m
#
# HID Sensor RTC drivers
@@ -4539,16 +4803,20 @@ CONFIG_DMADEVICES=y
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_AMBA_PL08X=y
+CONFIG_DW_DMAC_CORE=m
# CONFIG_DW_DMAC is not set
+CONFIG_DW_DMAC_PCI=m
CONFIG_MV_XOR=y
CONFIG_MX3_IPU=y
CONFIG_MX3_IPU_IRQS=4
CONFIG_TIMB_DMA=m
+CONFIG_TI_EDMA=y
CONFIG_PL330_DMA=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
CONFIG_MXS_DMA=y
CONFIG_DMA_OMAP=y
+CONFIG_TI_CPPI41=m
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
@@ -4558,16 +4826,17 @@ CONFIG_DMA_OF=y
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
+# CONFIG_UIO_MF624 is not set
CONFIG_VIRT_DRIVERS=y
#
@@ -4589,14 +4858,16 @@ CONFIG_USBIP_HOST=m
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8821AE is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_RTS5208 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
@@ -4671,10 +4942,7 @@ CONFIG_RTS5139=m
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_GPIO_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
@@ -4696,7 +4964,7 @@ CONFIG_RTS5139=m
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
-# CONFIG_CSR_WIFI is not set
+CONFIG_LTE_GDM724X=m
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
@@ -4705,8 +4973,16 @@ CONFIG_DRM_IMX=m
# CONFIG_DRM_IMX_FB_HELPER is not set
CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
# CONFIG_DRM_IMX_TVE is not set
+CONFIG_DRM_IMX_LDB=m
+CONFIG_DRM_IMX_IPUV3_CORE=m
+CONFIG_DRM_IMX_IPUV3=m
+CONFIG_DRM_IMX_HDMI=m
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_DGNC is not set
+# CONFIG_DGAP is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
@@ -4714,13 +4990,21 @@ CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
-# CONFIG_COMMON_CLK_DEBUG is not set
CONFIG_COMMON_CLK_VERSATILE=y
CONFIG_COMMON_CLK_SI5351=m
+CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_AXI_CLKGEN=m
-CONFIG_MVEBU_CLK_CORE=y
+CONFIG_COMMON_CLK_QCOM=m
+CONFIG_MSM_GCC_8660=m
+CONFIG_MSM_GCC_8960=m
+CONFIG_MSM_MMCC_8960=m
+CONFIG_MSM_GCC_8974=m
+CONFIG_MSM_MMCC_8974=m
+CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_CLK_GATING=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_ARMADA_370_CLK=y
+CONFIG_ARMADA_XP_CLK=y
CONFIG_HWSPINLOCK=y
#
@@ -4729,13 +5013,22 @@ CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_OMAP=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_MMIO=y
+CONFIG_DW_APB_TIMER=y
+CONFIG_DW_APB_TIMER_OF=y
CONFIG_ARMADA_370_XP_TIMER=y
CONFIG_SUN4I_TIMER=y
+CONFIG_SUN5I_HSTIMER=y
CONFIG_VT8500_TIMER=y
CONFIG_CADENCE_TTC_TIMER=y
CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
CONFIG_MAILBOX=y
CONFIG_PL320_MBOX=y
+CONFIG_OMAP_MBOX=y
+CONFIG_OMAP2PLUS_MBOX=y
+CONFIG_OMAP_MBOX_KFIFO_SIZE=256
# CONFIG_IOMMU_SUPPORT is not set
#
@@ -4750,6 +5043,7 @@ CONFIG_PL320_MBOX=y
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
# CONFIG_TI_EMIF is not set
+CONFIG_MVEBU_DEVBUS=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
@@ -4760,6 +5054,7 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
+# CONFIG_BMA180 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
@@ -4768,7 +5063,10 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# CONFIG_EXYNOS_ADC is not set
# CONFIG_MAX1363 is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
+# CONFIG_TWL6030_GPADC is not set
# CONFIG_VIPERBOARD_ADC is not set
#
@@ -4780,7 +5078,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
-# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
#
# Digital to analog converters
@@ -4811,6 +5108,11 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_ITG3200 is not set
#
+# Humidity sensors
+#
+# CONFIG_DHT11 is not set
+
+#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
@@ -4819,20 +5121,52 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# Light sensors
#
# CONFIG_ADJD_S311 is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_SENSORS_LM3533 is not set
+# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
-# CONFIG_HID_SENSOR_ALS is not set
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
+# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
+
+#
+# Inclinometer sensors
+#
+# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
+
+#
+# Triggers - standalone
+#
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_MPL3115 is not set
+# CONFIG_IIO_ST_PRESS is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_TMP006 is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
CONFIG_PWM_IMX=m
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWM_SUNXI=m
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
CONFIG_PWM_TWL=m
@@ -4842,7 +5176,20 @@ CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_RESET_CONTROLLER is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+CONFIG_OMAP_USB2=y
+CONFIG_TWL4030_USB=m
+# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+CONFIG_PHY_SUN4I_USB=y
+# CONFIG_POWERCAP is not set
#
# File systems
@@ -4878,6 +5225,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
+CONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
@@ -4898,7 +5246,6 @@ CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
#
# Caches
@@ -4980,10 +5327,13 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="ipfire.org"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
@@ -4992,6 +5342,7 @@ CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
@@ -5075,33 +5426,65 @@ CONFIG_DLM=m
#
# Kernel hacking
#
+
+#
+# printk and dmesg options
+#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -5109,21 +5492,13 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
@@ -5133,14 +5508,9 @@ CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -5177,18 +5547,28 @@ CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_ARM_PTDUMP is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_ARM_UNWIND=y
CONFIG_OLD_MCOUNT=y
@@ -5196,9 +5576,12 @@ CONFIG_OLD_MCOUNT=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_IMX_UART_PORT=1
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_PL01X is not set
+# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_OC_ETM=y
# CONFIG_PID_IN_CONTEXTIDR is not set
+CONFIG_DEBUG_SET_MODULE_RONX=y
#
# Security options
@@ -5265,14 +5648,16 @@ CONFIG_PAX_USERCOPY=y
# Memory Protections
#
# CONFIG_GRKERNSEC_KMEM is not set
-CONFIG_GRKERNSEC_JIT_HARDEN=y
# CONFIG_GRKERNSEC_PERF_HARDEN is not set
CONFIG_GRKERNSEC_RAND_THREADSTACK=y
CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
+CONFIG_GRKERNSEC_RANDSTRUCT=y
+CONFIG_GRKERNSEC_RANDSTRUCT_PERFORMANCE=y
CONFIG_GRKERNSEC_KERN_LOCKOUT=y
+CONFIG_GRKERNSEC_OLD_ARM_USERLAND=y
#
# Role Based Access Control Options
@@ -5331,12 +5716,12 @@ CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
+CONFIG_GRKERNSEC_HARDEN_IPC=y
# CONFIG_GRKERNSEC_TPE is not set
#
# Network Protections
#
-CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set
@@ -5357,6 +5742,8 @@ CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=6
CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
@@ -5408,6 +5795,7 @@ CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ABLK_HELPER=m
#
# Authenticated Encryption with Associated Data
@@ -5440,6 +5828,7 @@ CONFIG_CRYPTO_VMAC=m
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -5451,7 +5840,7 @@ CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=y
CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
@@ -5460,6 +5849,7 @@ CONFIG_CRYPTO_WP512=m
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
@@ -5468,7 +5858,7 @@ CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
@@ -5484,6 +5874,8 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
@@ -5492,12 +5884,15 @@ CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_MV_CESA=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_CRYPTO_DEV_OMAP_SHAM=y
CONFIG_CRYPTO_DEV_OMAP_AES=y
+CONFIG_CRYPTO_DEV_SAHARA=y
+CONFIG_CRYPTO_DEV_SUNXI_SS=y
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
@@ -5512,9 +5907,11 @@ CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_STMP_DEVICE=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
@@ -5529,10 +5926,14 @@ CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=m
+CONFIG_LZ4HC_COMPRESS=m
+CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
@@ -5547,13 +5948,14 @@ CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=m
-CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
@@ -5567,9 +5969,8 @@ CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
CONFIG_VIRTUALIZATION=y
-CONFIG_KVM_ARM_MAX_VCPUS=0
-
-#
-# Virtio drivers
-#
diff --git a/config/kernel/kernel.config.armv5tel-ipfire-rpi b/config/kernel/kernel.config.armv5tel-ipfire-rpi
index 2c709cc..269c633 100644
--- a/config/kernel/kernel.config.armv5tel-ipfire-rpi
+++ b/config/kernel/kernel.config.armv5tel-ipfire-rpi
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.10.38 Kernel Configuration
+# Linux/arm 3.14.22 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -16,7 +16,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FIQ=y
CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_IO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
@@ -31,37 +31,38 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_FHANDLE is not set
+CONFIG_FHANDLE=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
-# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+CONFIG_IRQ_FORCED_THREADING=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -80,6 +81,7 @@ CONFIG_HIGH_RES_TIMERS=y
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -96,7 +98,8 @@ CONFIG_TINY_RCU=y
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=19
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
@@ -111,16 +114,17 @@ CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
-# CONFIG_BLK_CGROUP is not set
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
@@ -128,16 +132,16 @@ CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
-CONFIG_HOTPLUG=y
-# CONFIG_EXPERT is not set
+CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
@@ -149,7 +153,7 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
@@ -163,11 +167,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -179,12 +187,21 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
@@ -193,6 +210,7 @@ CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
+# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -200,28 +218,31 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
+# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
@@ -233,6 +254,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
@@ -240,16 +262,17 @@ CONFIG_EFI_PARTITION=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_ASN1=m
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y
#
@@ -281,8 +304,8 @@ CONFIG_ARCH_BCM2708=y
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_MSM_NODT is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
@@ -291,12 +314,9 @@ CONFIG_ARCH_BCM2708=y
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
-CONFIG_GPIO_PCA953X=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
+# CONFIG_GPIO_PCA953X is not set
# CONFIG_PLAT_SPEAR is not set
#
@@ -307,7 +327,6 @@ CONFIG_BCM2708_GPIO=y
CONFIG_BCM2708_VCMEM=y
# CONFIG_BCM2708_NOL2CACHE is not set
CONFIG_BCM2708_SPIDEV=y
-CONFIG_BCM2708_DMAER=m
#
# Processor Type
@@ -359,6 +378,13 @@ CONFIG_ARCH_NR_GPIO=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_AEABI=y
@@ -368,14 +394,16 @@ CONFIG_AEABI=y
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_COMPACTION is not set
+CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -385,27 +413,32 @@ CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSWAP is not set
+# CONFIG_ZSMALLOC is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
#
# Boot options
#
-CONFIG_USE_OF=y
+# CONFIG_USE_OF is not set
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_ARM_APPENDED_DTB is not set
-CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 root=/dev/mmcblk0p3 rootwait"
+CONFIG_CMDLINE="console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
+CONFIG_CRASH_DUMP=y
# CONFIG_AUTO_ZRELADDR is not set
#
@@ -416,13 +449,13 @@ CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
@@ -433,15 +466,20 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# ARM CPU frequency scaling drivers
#
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_ARM_BCM2835_CPUFREQ=y
+
+#
+# CPU Idle
+#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# ARM CPU Idle Drivers
+#
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
@@ -458,10 +496,10 @@ CONFIG_VFP=y
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
#
@@ -472,11 +510,12 @@ CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
-CONFIG_PM_RUNTIME=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
@@ -486,13 +525,13 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
+CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
-CONFIG_XFRM_ALGO=m
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_ALGO=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
@@ -513,10 +552,9 @@ CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
@@ -524,16 +562,16 @@ CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
@@ -544,13 +582,14 @@ CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_DEFAULT_RENO=y
-CONFIG_DEFAULT_TCP_CONG="reno"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -561,17 +600,20 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
-# CONFIG_IPV6_SUBTREES is not set
-# CONFIG_IPV6_MROUTE is not set
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
@@ -586,10 +628,11 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_ZONES is not set
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
@@ -621,14 +664,30 @@ CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
+CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
@@ -637,6 +696,7 @@ CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
@@ -655,6 +715,7 @@ CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
@@ -663,6 +724,7 @@ CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -679,8 +741,10 @@ CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LAYER7=m
# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -706,7 +770,21 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_SET is not set
+CONFIG_IP_SET=m
+CONFIG_IP_SET_MAX=256
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
@@ -751,16 +829,22 @@ CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -784,9 +868,13 @@ CONFIG_IP_NF_MATCH_IPP2P=m
#
# IPv6: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV6=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
+CONFIG_NF_DEFRAG_IPV6=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
+CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
@@ -799,10 +887,14 @@ CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-# CONFIG_NF_NAT_IPV6 is not set
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -826,43 +918,45 @@ CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
+CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
+# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
+CONFIG_SCTP_COOKIE_HMAC_MD5=y
+CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
+# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
-CONFIG_STP=m
+CONFIG_STP=y
CONFIG_GARP=m
-CONFIG_BRIDGE=m
+CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
-CONFIG_LLC=m
+CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
-CONFIG_IEEE802154=m
-CONFIG_IEEE802154_6LOWPAN=m
-CONFIG_MAC802154=m
+# CONFIG_IEEE802154 is not set
+CONFIG_6LOWPAN_IPHC=m
CONFIG_NET_SCHED=y
#
@@ -888,6 +982,8 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
@@ -907,6 +1003,7 @@ CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
@@ -914,6 +1011,7 @@ CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
@@ -935,10 +1033,15 @@ CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
-# CONFIG_VSOCKETS is not set
-# CONFIG_NETLINK_MMAP is not set
+CONFIG_OPENVSWITCH_GRE=y
+CONFIG_VSOCKETS=m
+CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
-CONFIG_NETPRIO_CGROUP=m
+CONFIG_NET_MPLS_GSO=m
+CONFIG_HSR=m
+CONFIG_CGROUP_NET_PRIO=m
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
@@ -976,9 +1079,8 @@ CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+CONFIG_BT_WILINK=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
@@ -990,7 +1092,9 @@ CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
@@ -1000,25 +1104,25 @@ CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
-CONFIG_RFKILL_REGULATOR=m
CONFIG_RFKILL_GPIO=m
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
-CONFIG_CEPH_LIB=m
-# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
-# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
+# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
@@ -1029,11 +1133,11 @@ CONFIG_HAVE_BPF_JIT=y
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
@@ -1047,13 +1151,12 @@ CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_REGMAP_MMIO=m
CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_CMA=y
-# CONFIG_CMA_DEBUG is not set
+CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
-CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CMA_SIZE_MBYTES=5
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
@@ -1064,137 +1167,30 @@ CONFIG_CMA_AREAS=7
#
# Bus devices
#
+# CONFIG_ARM_CCI is not set
CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=m
-# CONFIG_MTD_AFS_PARTS is not set
-CONFIG_MTD_OF_PARTS=m
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_SWAP is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_NAND_ECC=m
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-CONFIG_MTD_LPDDR=m
-CONFIG_MTD_QINFO_PROBE=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_DTC=y
-CONFIG_OF=y
-
-#
-# Device Tree and Open Firmware support
-#
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_OF_SELFTEST is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_NET=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
+# CONFIG_MTD is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_DRBD=m
+# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-CONFIG_MG_DISK=m
-CONFIG_MG_DISK_RES=0
-CONFIG_BLK_DEV_RBD=m
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
@@ -1202,10 +1198,10 @@ CONFIG_BLK_DEV_RBD=m
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
-CONFIG_DUMMY_IRQ=m
+# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
-CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
@@ -1214,11 +1210,11 @@ CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
-CONFIG_USB_SWITCH_FSA9480=m
+# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
@@ -1228,15 +1224,15 @@ CONFIG_USB_SWITCH_FSA9480=m
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_EEPROM_MAX6875=m
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
#
# Texas Instruments shared transport line discipline
#
-# CONFIG_TI_ST is not set
+CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
@@ -1247,27 +1243,34 @@ CONFIG_EEPROM_93CX6=m
CONFIG_BCM2708_VCHIQ=y
#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
+
+#
# SCSI device support
#
CONFIG_SCSI_MOD=y
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_ENCLOSURE=m
+# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -1276,41 +1279,22 @@ CONFIG_SCSI_MULTI_LUN=y
#
# SCSI Transports
#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SRP_ATTRS=m
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
-CONFIG_SCSI_UFSHCD=m
-CONFIG_SCSI_UFSHCD_PLATFORM=m
-CONFIG_LIBFC=m
-CONFIG_LIBFCOE=m
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_SCSI_OSD_DPRINT_SENSE=1
-# CONFIG_SCSI_OSD_DEBUG is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-
-#
-# Controllers with non-SFF native interface
-#
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_ATA_SFF is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -1318,56 +1302,43 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
-CONFIG_BCACHE=m
-# CONFIG_BCACHE_DEBUG is not set
-# CONFIG_BCACHE_EDEBUG is not set
-# CONFIG_BCACHE_CLOSURES_DEBUG is not set
+# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
-CONFIG_DM_BIO_PRISON=m
-CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_THIN_PROVISIONING=m
-# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
-CONFIG_DM_CACHE=m
-CONFIG_DM_CACHE_MQ=m
-CONFIG_DM_CACHE_CLEANER=m
+# CONFIG_DM_THIN_PROVISIONING is not set
+# CONFIG_DM_CACHE is not set
CONFIG_DM_MIRROR=m
-CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
+# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=m
-CONFIG_DM_UEVENT=y
-CONFIG_DM_FLAKEY=m
-CONFIG_DM_VERITY=m
+# CONFIG_DM_UEVENT is not set
+# CONFIG_DM_FLAKEY is not set
+# CONFIG_DM_VERITY is not set
+# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
+CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
-CONFIG_EQUALIZER=m
-CONFIG_MII=m
+# CONFIG_EQUALIZER is not set
CONFIG_IFB=m
-CONFIG_NET_TEAM=m
-CONFIG_NET_TEAM_MODE_BROADCAST=m
-CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
-CONFIG_NET_TEAM_MODE_RANDOM=m
-CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
-CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_VXLAN=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_VXLAN is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
CONFIG_IMQ=m
# CONFIG_IMQ_BEHAVIOR_AA is not set
CONFIG_IMQ_BEHAVIOR_AB=y
@@ -1376,9 +1347,10 @@ CONFIG_IMQ_BEHAVIOR_AB=y
CONFIG_IMQ_NUM_DEVS=2
CONFIG_TUN=m
CONFIG_VETH=m
+# CONFIG_NLMON is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
-CONFIG_ATM_TCP=m
+# CONFIG_ATM_TCP is not set
#
# CAIF transport drivers
@@ -1387,89 +1359,77 @@ CONFIG_ATM_TCP=m
#
# Distributed Switch Architecture drivers
#
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
+CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_CADENCE=y
-CONFIG_ARM_AT91_ETHER=m
-CONFIG_MACB=m
+# CONFIG_ARM_AT91_ETHER is not set
+# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_B44=m
-CONFIG_NET_CALXEDA_XGMAC=m
+# CONFIG_B44 is not set
+# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_CS89x0=m
-CONFIG_CS89x0_PLATFORM=y
-CONFIG_DM9000=m
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-CONFIG_DNET=m
+# CONFIG_CS89x0 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_FTMAC100=m
-CONFIG_FTGMAC100=m
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_MVMDIO=m
+# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
-CONFIG_KS8842=m
-CONFIG_KS8851=m
-CONFIG_KS8851_MLL=m
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
+# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_8390=y
-CONFIG_AX88796=m
-CONFIG_AX88796_93CX6=y
-CONFIG_ETHOC=m
+# CONFIG_AX88796 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SH_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
-CONFIG_SMC91X=m
-CONFIG_SMC911X=m
-CONFIG_SMSC911X=m
-# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_STMMAC_ETH=m
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_DA is not set
+# CONFIG_STMMAC_ETH is not set
+CONFIG_NET_VENDOR_VIA=y
CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_WIZNET_W5100=m
-CONFIG_WIZNET_W5300=m
-# CONFIG_WIZNET_BUS_DIRECT is not set
-# CONFIG_WIZNET_BUS_INDIRECT is not set
-CONFIG_WIZNET_BUS_ANY=y
-CONFIG_PHYLIB=y
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
-CONFIG_AT803X_PHY=m
-CONFIG_AMD_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_BCM87XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
-# CONFIG_FIXED_PHY is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
CONFIG_MDIO_BITBANG=m
-CONFIG_MDIO_GPIO=m
-CONFIG_MDIO_BUS_MUX=m
-CONFIG_MDIO_BUS_MUX_GPIO=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=m
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_PLIP is not set
+# CONFIG_MDIO_GPIO is not set
+CONFIG_MICREL_KS8995MA=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
@@ -1478,15 +1438,12 @@ CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
-CONFIG_PPTP=m
+# CONFIG_PPTP is not set
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
+# CONFIG_SLIP is not set
CONFIG_SLHC=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
@@ -1496,16 +1453,19 @@ CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=m
+CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1524,7 +1484,7 @@ CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
-# CONFIG_USB_IPHETH is not set
+CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
@@ -1537,7 +1497,7 @@ CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
-# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MAC80211_HWSIM=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not set
@@ -1547,27 +1507,31 @@ CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
-CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
+# CONFIG_ATH9K_WOW is not set
+# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set
+CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
+# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
-CONFIG_CARL9170_HWRNG=y
+# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
-CONFIG_ATH6KL_SDIO=m
+# CONFIG_ATH6KL_SDIO is not set
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_AR5523=m
+# CONFIG_ATH10K is not set
+# CONFIG_WCN36XX is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
-# CONFIG_B43_BCMA_EXTRA is not set
CONFIG_B43_SSB=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set
CONFIG_B43_PHY_LP=y
-# CONFIG_B43_PHY_HT is not set
+CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
@@ -1584,12 +1548,11 @@ CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
-# CONFIG_BRCMFMAC_USB is not set
+CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
@@ -1607,6 +1570,7 @@ CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
@@ -1617,14 +1581,20 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_USB=m
+CONFIG_RTLWIFI_DEBUG=y
+CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
# CONFIG_WL1251_SPI is not set
-CONFIG_WL1251_SDIO=m
+# CONFIG_WL1251_SDIO is not set
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
-# CONFIG_WLCORE_SPI is not set
+CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_ZD1211RW=m
@@ -1632,101 +1602,21 @@ CONFIG_ZD1211RW=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
-CONFIG_RTL8192CU=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
+CONFIG_CW1200_WLAN_SPI=m
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-
-#
-# X.25/LAPB support is disabled
-#
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-CONFIG_IEEE802154_DRIVERS=m
-CONFIG_IEEE802154_FAKEHARD=m
-CONFIG_IEEE802154_FAKELB=m
-# CONFIG_IEEE802154_AT86RF230 is not set
-# CONFIG_IEEE802154_MRF24J40 is not set
+# CONFIG_WAN is not set
CONFIG_ISDN=y
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-# CONFIG_ISDN_DRV_LOOP is not set
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_DEBUG=y
-
-#
-# HiSax PCMCIA card service modules
-#
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-
-#
-# Active cards
-#
+# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
#
# CAPI hardware drivers
@@ -1735,7 +1625,6 @@ CONFIG_CAPI_AVM=y
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
-# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
@@ -1749,7 +1638,6 @@ CONFIG_MISDN_L1OIP=m
# mISDN hardware drivers
#
CONFIG_MISDN_HFCUSB=m
-CONFIG_ISDN_HDLC=m
#
# Input device support
@@ -1757,8 +1645,8 @@ CONFIG_ISDN_HDLC=m
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
-CONFIG_INPUT_SPARSEKMAP=m
-CONFIG_INPUT_MATRIXKMAP=m
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
@@ -1767,41 +1655,48 @@ CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ADP5588=m
-CONFIG_KEYBOARD_ADP5589=m
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_QT2160=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TCA6416=m
-CONFIG_KEYBOARD_TCA8418=m
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_LM8323=m
-CONFIG_KEYBOARD_LM8333=m
-CONFIG_KEYBOARD_MAX7359=m
-CONFIG_KEYBOARD_MCS=m
-CONFIG_KEYBOARD_MPR121=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_OPENCORES=m
-CONFIG_KEYBOARD_SAMSUNG=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_AS5011 is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_AD714X_I2C=m
+CONFIG_INPUT_AD714X_SPI=m
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
@@ -1810,31 +1705,33 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
-CONFIG_INPUT_PWM_BEEPER=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_ADXL34X_I2C=m
+CONFIG_INPUT_ADXL34X_SPI=m
# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_CMA3000=m
+# CONFIG_INPUT_CMA3000_I2C is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_AMBAKMI=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_SERIO_ALTERA_PS2=m
-CONFIG_SERIO_PS2MULT=m
-CONFIG_SERIO_ARC_PS2=m
-CONFIG_SERIO_APBPS2=m
-# CONFIG_GAMEPORT is not set
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
#
# Character devices
@@ -1845,76 +1742,54 @@ CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_N_GSM=m
+# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_DMA=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_DW=m
-CONFIG_SERIAL_8250_EM=m
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL010 is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_SH_SCI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_SCCNXP=m
-CONFIG_SERIAL_TIMBERDALE=m
-CONFIG_SERIAL_ALTERA_JTAGUART=m
-CONFIG_SERIAL_ALTERA_UART=m
-CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
-CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
-CONFIG_SERIAL_XILINX_PS_UART=m
-CONFIG_SERIAL_ARC=m
-CONFIG_SERIAL_ARC_NR_PORTS=1
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_ST_ASC is not set
+CONFIG_TTY_PRINTK=y
# CONFIG_HVC_DCC is not set
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-# CONFIG_IPMI_PANIC_STRING is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
+# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_HW_RANDOM_BCM2708=y
-CONFIG_NVRAM=m
# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_BRCM_CHAR_DRIVERS=y
CONFIG_BCM_VC_CMA=y
+# CONFIG_BCM_VC_SM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
@@ -1924,14 +1799,11 @@ CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
@@ -1940,32 +1812,31 @@ CONFIG_I2C_ALGOPCA=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_BCM2708=m
+CONFIG_I2C_BCM2708=y
CONFIG_I2C_BCM2708_BAUDRATE=100000
-CONFIG_I2C_CBUS_GPIO=m
-CONFIG_I2C_DESIGNWARE_CORE=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=m
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_NOMADIK=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PCA_PLATFORM=m
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
-CONFIG_I2C_SIMTEC=m
-CONFIG_I2C_XILINX=m
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
-CONFIG_I2C_DIOLAN_U2C=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
-CONFIG_I2C_TINY_USB=m
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
-CONFIG_I2C_STUB=m
+# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -1978,13 +1849,10 @@ CONFIG_SPI_MASTER=y
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BCM2708=m
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
-CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_FSL_SPI is not set
-CONFIG_SPI_OC_TINY=m
-CONFIG_SPI_PL022=m
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
@@ -1994,74 +1862,51 @@ CONFIG_SPI_PL022=m
#
# SPI Protocol Masters
#
-# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
-
-#
-# Qualcomm MSM SSBI bus support
-#
-# CONFIG_SSBI is not set
-CONFIG_HSI=m
-CONFIG_HSI_BOARDINFO=y
-
-#
-# HSI clients
-#
-CONFIG_HSI_CHAR=m
+# CONFIG_HSI is not set
#
# PPS support
#
-CONFIG_PPS=m
-# CONFIG_PPS_DEBUG is not set
+# CONFIG_PPS is not set
#
-# PPS clients support
+# PPS generators support
#
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
#
-# PPS generators support
+# PTP clock support
#
+# CONFIG_PTP_1588_CLOCK is not set
#
-# PTP clock support
+# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
-CONFIG_PTP_1588_CLOCK=m
-# CONFIG_DP83640_PHY is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
-CONFIG_OF_GPIO=y
+CONFIG_GPIO_DEVRES=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GENERIC=m
-CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers:
#
-CONFIG_GPIO_GENERIC_PLATFORM=m
-# CONFIG_GPIO_EM is not set
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_RCAR=m
-CONFIG_GPIO_TS5500=m
-CONFIG_GPIO_GRGPIO=m
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_PL061 is not set
+# CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_SCH311X is not set
+# CONFIG_GPIO_TS5500 is not set
#
# I2C GPIO expanders:
#
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCF857X=m
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
-CONFIG_GPIO_ADP5588=m
-CONFIG_GPIO_ADNP=m
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -2070,16 +1915,18 @@ CONFIG_GPIO_ADNP=m
#
# SPI GPIO expanders:
#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
-CONFIG_GPIO_MC33880=m
-CONFIG_GPIO_74X164=m
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
#
+# LPC GPIO expanders:
+#
+
+#
# MODULbus GPIO expanders:
#
@@ -2108,7 +1955,7 @@ CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2433_CRC=y
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
@@ -2117,9 +1964,8 @@ CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
@@ -2130,10 +1976,10 @@ CONFIG_POWER_SUPPLY=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
@@ -2169,13 +2015,12 @@ CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
-CONFIG_SENSORS_IBMAEM=m
-CONFIG_SENSORS_IBMPEX=m
-CONFIG_SENSORS_IIO_HWMON=m
+CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
@@ -2263,12 +2108,15 @@ CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_BCM2835=y
+
+#
+# Texas Instruments thermal drivers
+#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2276,16 +2124,17 @@ CONFIG_WATCHDOG_CORE=y
#
# Watchdog Device Drivers
#
-CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_BCM2708_WDT=m
+# CONFIG_MEN_A21_WDT is not set
#
# USB-based Watchdog Cards
#
-CONFIG_USBPCWATCHDOG=m
+# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
@@ -2294,18 +2143,20 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_GPIO=y
+# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
-CONFIG_BCMA=y
+CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
+# CONFIG_BCMA_HOST_SOC is not set
+# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
+# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
@@ -2321,14 +2172,17 @@ CONFIG_MFD_CORE=m
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
+# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
@@ -2349,6 +2203,7 @@ CONFIG_MFD_CORE=m
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
@@ -2364,7 +2219,7 @@ CONFIG_MFD_CORE=m
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
-# CONFIG_MFD_WL1273_CORE is not set
+CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
@@ -2378,30 +2233,8 @@ CONFIG_MFD_CORE=m
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=m
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_REGULATOR_GPIO=m
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
@@ -2425,7 +2258,6 @@ CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
@@ -2503,6 +2335,7 @@ CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
@@ -2519,7 +2352,7 @@ CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
-CONFIG_USB_SN9C102=m
+CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
@@ -2531,8 +2364,9 @@ CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_STK1160_COMMON=m
+# CONFIG_VIDEO_STK1160_AC97 is not set
CONFIG_VIDEO_STK1160=m
-CONFIG_VIDEO_STK1160_AC97=y
#
# Analog/digital TV USB devices
@@ -2540,7 +2374,7 @@ CONFIG_VIDEO_STK1160_AC97=y
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_CX231XX=m
-# CONFIG_VIDEO_CX231XX_RC is not set
+CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
@@ -2554,7 +2388,7 @@ CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
@@ -2593,12 +2427,13 @@ CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
-CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y
+# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
@@ -2614,7 +2449,6 @@ CONFIG_VIDEO_BCM2835_MMAL=m
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
-# CONFIG_MEDIA_PARPORT_SUPPORT is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_MEDIA_COMMON_OPTIONS=y
@@ -2625,7 +2459,6 @@ CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
@@ -2676,7 +2509,11 @@ CONFIG_VIDEO_MT9V011=m
#
#
-# Miscelaneous helper chips
+# Audio/Video compression chips
+#
+
+#
+# Miscellaneous helper chips
#
#
@@ -2709,6 +2546,7 @@ CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
@@ -2720,6 +2558,7 @@ CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
@@ -2744,7 +2583,6 @@ CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_CX24116=m
-CONFIG_DVB_M88DS3103=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
@@ -2814,6 +2652,7 @@ CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
+CONFIG_DVB_DVBSKY_M88DS3103=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
@@ -2827,52 +2666,39 @@ CONFIG_DVB_AF9033=m
#
# Graphics support
#
-CONFIG_DRM=m
-CONFIG_DRM_USB=m
-CONFIG_DRM_KMS_HELPER=m
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-
-#
-# I2C encoder or helper chips
-#
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-CONFIG_DRM_I2C_NXP_TDA998X=m
-CONFIG_DRM_UDL=m
-# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_HDMI=y
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
CONFIG_FB_BCM2708=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_UVESA=m
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
-CONFIG_FB_SMSCUFX=m
-CONFIG_FB_UDL=m
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_UDL is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
@@ -2880,29 +2706,50 @@ CONFIG_FB_UDL=m
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_HX8357 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_FB_SSD1307 is not set
-CONFIG_SOUND=m
+CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
+CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
@@ -2916,8 +2763,8 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -2934,14 +2781,11 @@ CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_PORTMAN2X4=m
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_AC97_POWER_SAVE_DEFAULT=60
+# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_ARM=y
-CONFIG_SND_ARMAACI=m
+# CONFIG_SND_ARMAACI is not set
CONFIG_SND_BCM2835=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
@@ -2950,24 +2794,25 @@ CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
+# CONFIG_SND_USB_HIFACE is not set
CONFIG_SND_SOC=m
-CONFIG_SND_SOC_DMAENGINE_PCM=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_BCM2708_SOC_I2S=m
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m
+# CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS is not set
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
+CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
CONFIG_SND_BCM2708_SOC_RPI_DAC=m
# CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC is not set
-CONFIG_SND_DESIGNWARE_I2S=m
+# CONFIG_SND_DESIGNWARE_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_PCM1794A=m
CONFIG_SND_SOC_PCM5102A=m
-# CONFIG_SND_SOC_PCM512x is not set
+CONFIG_SND_SOC_TAS5713=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SIMPLE_CARD=m
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SOUND_PRIME=m
CONFIG_AC97_BUS=m
#
@@ -2975,50 +2820,52 @@ CONFIG_AC97_BUS=m
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=y
+CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
-CONFIG_HID_APPLE=y
+CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
-CONFIG_HID_AUREAL=m
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_PRODIKEYS=m
-CONFIG_HID_CYPRESS=y
+# CONFIG_HID_AUREAL is not set
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EMS_FF is not set
+CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
-CONFIG_HID_EZKEY=y
+CONFIG_HID_ELO=m
+CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
+# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
-CONFIG_HID_ICADE=m
+# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=y
+CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
-CONFIG_HID_LENOVO_TPKBD=m
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_LOGITECH_DJ=m
+# CONFIG_HID_LENOVO_TPKBD is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=m
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
@@ -3026,49 +2873,49 @@ CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_PICOLCD_CIR=y
-CONFIG_HID_PRIMAX=m
-CONFIG_HID_PS3REMOTE=m
+# CONFIG_HID_PICOLCD_FB is not set
+# CONFIG_HID_PICOLCD_BACKLIGHT is not set
+# CONFIG_HID_PICOLCD_LCD is not set
+# CONFIG_HID_PICOLCD_LEDS is not set
+# CONFIG_HID_PICOLCD_CIR is not set
+# CONFIG_HID_PRIMAX is not set
CONFIG_HID_ROCCAT=m
-CONFIG_HID_SAITEK=m
+# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
+# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
-CONFIG_HID_STEELSERIES=m
+# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
-CONFIG_HID_TIVO=m
+# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
-CONFIG_HID_WIIMOTE_EXT=y
+CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
-CONFIG_HID_SENSOR_HUB=m
+# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
+CONFIG_USB_HID=y
+CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
-CONFIG_I2C_HID=m
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
+# CONFIG_I2C_HID is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -3080,25 +2927,32 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_DWCOTG=y
-CONFIG_USB_HCD_BCMA=y
+# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
@@ -3106,7 +2960,7 @@ CONFIG_USB_HCD_BCMA=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3115,10 +2969,9 @@ CONFIG_USB_TMC=m
#
# also be needed; see USB_STORAGE Help for more info
#
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
-CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
@@ -3135,17 +2988,18 @@ CONFIG_USB_STORAGE_ENE_UB6250=m
#
# USB Imaging devices
#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_DWC2 is not set
#
# USB port drivers
#
-CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@@ -3156,7 +3010,6 @@ CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -3173,19 +3026,16 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
+# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
@@ -3195,45 +3045,57 @@ CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_XSENS_MT=m
-CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
-# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
-CONFIG_USB_HSIC_USB3503=m
+# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
+
+#
+# USB Physical Layer drivers
+#
# CONFIG_USB_PHY is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_RCAR_PHY is not set
+# CONFIG_USB_ULPI is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -3244,80 +3106,65 @@ CONFIG_MMC=y
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
-CONFIG_MMC_ARMMMCI=m
+# CONFIG_MMC_ARMMMCI is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_SDHCI_PXAV3=m
-CONFIG_MMC_SDHCI_PXAV2=m
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_SDHCI_BCM2708=y
-CONFIG_MMC_SDHCI_BCM2708_DMA=y
-# CONFIG_MMC_SPI is not set
-CONFIG_MMC_DW=m
-# CONFIG_MMC_DW_IDMAC is not set
-CONFIG_MMC_DW_PLTFM=m
-CONFIG_MMC_DW_EXYNOS=m
-CONFIG_MMC_VUB300=m
-CONFIG_MMC_USHC=m
-CONFIG_MEMSTICK=m
-# CONFIG_MEMSTICK_DEBUG is not set
-
-#
-# MemoryStick drivers
-#
-# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-CONFIG_MSPRO_BLOCK=m
-
-#
-# MemoryStick Host Controller Drivers
-#
+# CONFIG_MMC_SDHCI_BCM2708_DMA is not set
+CONFIG_MMC_BCM2835=y
+# CONFIG_MMC_BCM2835_DMA is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS=m
#
# LED drivers
#
-CONFIG_LEDS_LM3530=m
-CONFIG_LEDS_LM3642=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_PCA9532_GPIO=y
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP55XX_COMMON=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_LP5562=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_PCA9633=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_REGULATOR=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_LT3593=m
-# CONFIG_LEDS_RENESAS_TPU is not set
-CONFIG_LEDS_TCA6507=m
-CONFIG_LEDS_LM355x=m
-CONFIG_LEDS_OT200=m
-CONFIG_LEDS_BLINKM=m
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_PCA9685 is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_OT200 is not set
+# CONFIG_LEDS_BLINKM is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_ONESHOT=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
@@ -3331,7 +3178,8 @@ CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_SYSTOHC is not set
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
@@ -3354,12 +3202,14 @@ CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
+# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
-CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
@@ -3385,58 +3235,56 @@ CONFIG_RTC_DRV_RX4581=m
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-CONFIG_RTC_DRV_DS1286=m
-CONFIG_RTC_DRV_DS1511=m
-CONFIG_RTC_DRV_DS1553=m
-CONFIG_RTC_DRV_DS1742=m
-CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-CONFIG_RTC_DRV_M48T35=m
-CONFIG_RTC_DRV_M48T59=m
-CONFIG_RTC_DRV_MSM6242=m
-CONFIG_RTC_DRV_BQ4802=m
-CONFIG_RTC_DRV_RP5C01=m
-CONFIG_RTC_DRV_V3020=m
-CONFIG_RTC_DRV_DS2404=m
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PL030=m
-CONFIG_RTC_DRV_PL031=m
-CONFIG_RTC_DRV_SNVS=m
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_MOXART is not set
#
# HID Sensor RTC drivers
#
-CONFIG_RTC_DRV_HID_SENSOR_TIME=m
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
-CONFIG_AMBA_PL08X=y
-CONFIG_DW_DMAC=y
-# CONFIG_DW_DMAC_BIG_ENDIAN_IO is not set
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_DW_DMAC_CORE is not set
+# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
-CONFIG_PL330_DMA=y
-CONFIG_DMA_BCM2708=y
+# CONFIG_PL330_DMA is not set
+CONFIG_DMA_BCM2835=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DMA_OF=y
#
# DMA Clients
#
-CONFIG_ASYNC_TX_DMA=y
-CONFIG_DMATEST=m
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_DMEM_GENIRQ=m
+# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_VIRT_DRIVERS is not set
#
@@ -3448,120 +3296,19 @@ CONFIG_UIO_DMEM_GENIRQ=m
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
-CONFIG_USBIP_CORE=m
-CONFIG_USBIP_VHCI_HCD=m
-CONFIG_USBIP_HOST=m
-# CONFIG_USBIP_DEBUG is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-CONFIG_ECHO=m
+# CONFIG_USBIP_CORE is not set
+CONFIG_W35UND=m
+CONFIG_PRISM2_USB=m
+# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_PANEL is not set
# CONFIG_RTLLIB is not set
-# CONFIG_R8712U is not set
-CONFIG_RTS5139=m
-# CONFIG_RTS5139_DEBUG is not set
+CONFIG_R8712U=m
+# CONFIG_R8188EU is not set
+# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_VT6656 is not set
-
-#
-# IIO staging drivers
-#
-
-#
-# Accelerometers
-#
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16204 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_LIS3L02DQ is not set
-
-#
-# Analog to digital converters
-#
-# CONFIG_AD7291 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7280 is not set
-
-#
-# Analog digital bi-direction converters
-#
-# CONFIG_ADT7316 is not set
-
-#
-# Capacitance to digital converters
-#
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7746 is not set
-
-#
-# Direct Digital Synthesis
-#
-# CONFIG_AD5930 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_AD9850 is not set
-# CONFIG_AD9852 is not set
-# CONFIG_AD9910 is not set
-# CONFIG_AD9951 is not set
-
-#
-# Digital gyroscope sensors
-#
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16260 is not set
-
-#
-# Network Analyzer, Impedance Converters
-#
-# CONFIG_AD5933 is not set
-
-#
-# Light sensors
-#
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2x7x is not set
-
-#
-# Magnetometer sensors
-#
-# CONFIG_SENSORS_HMC5843 is not set
-
-#
-# Active energy metering IC
-#
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-
-#
-# Resolver to digital converters
-#
-# CONFIG_AD2S90 is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-
-#
-# Triggers - standalone
-#
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_ZSMALLOC is not set
+CONFIG_VT6656=m
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
@@ -3569,10 +3316,35 @@ CONFIG_RTS5139=m
#
# Speakup console speech
#
-# CONFIG_SPEAKUP is not set
+CONFIG_SPEAKUP=m
+# CONFIG_SPEAKUP_SYNTH_ACNTSA is not set
+# CONFIG_SPEAKUP_SYNTH_APOLLO is not set
+# CONFIG_SPEAKUP_SYNTH_AUDPTR is not set
+# CONFIG_SPEAKUP_SYNTH_BNS is not set
+# CONFIG_SPEAKUP_SYNTH_DECTLK is not set
+# CONFIG_SPEAKUP_SYNTH_DECEXT is not set
+# CONFIG_SPEAKUP_SYNTH_LTLK is not set
+CONFIG_SPEAKUP_SYNTH_SOFT=m
+# CONFIG_SPEAKUP_SYNTH_SPKOUT is not set
+# CONFIG_SPEAKUP_SYNTH_TXPRT is not set
+# CONFIG_SPEAKUP_SYNTH_DUMMY is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_STAGING_MEDIA is not set
+CONFIG_STAGING_MEDIA=y
+CONFIG_DVB_AS102=m
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_USB_MSI3101 is not set
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_USB_SN9C102=m
+CONFIG_LIRC_STAGING=y
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_RPI=m
+CONFIG_LIRC_SASEM=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SERIAL_TRANSMITTER=y
+# CONFIG_LIRC_SIR is not set
+# CONFIG_LIRC_ZILOG is not set
#
# Android
@@ -3580,10 +3352,11 @@ CONFIG_RTS5139=m
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
-# CONFIG_CSR_WIFI is not set
+# CONFIG_LTE_GDM724X is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
-# CONFIG_ZCACHE is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_DGAP is not set
CONFIG_CLKDEV_LOOKUP=y
#
@@ -3603,110 +3376,18 @@ CONFIG_CLKDEV_LOOKUP=y
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
-CONFIG_IIO=m
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-
-#
-# Accelerometers
-#
-# CONFIG_HID_SENSOR_ACCEL_3D is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-
-#
-# Analog to digital converters
-#
-# CONFIG_AD7266 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_TI_ADC081C is not set
-
-#
-# Amplifiers
-#
-# CONFIG_AD8366 is not set
-
-#
-# Hid Sensor IIO Common
-#
-CONFIG_HID_SENSOR_IIO_COMMON=m
-# CONFIG_HID_SENSOR_IIO_TRIGGER is not set
-# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
-
-#
-# Digital to analog converters
-#
-# CONFIG_AD5064 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5686 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MCP4725 is not set
-
-#
-# Frequency Synthesizers DDS/PLL
-#
-
-#
-# Clock Generator/Distribution
-#
-# CONFIG_AD9523 is not set
-
-#
-# Phase-Locked Loop (PLL) frequency synthesizers
-#
-# CONFIG_ADF4350 is not set
-
-#
-# Digital gyroscope sensors
-#
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADXRS450 is not set
-# CONFIG_HID_SENSOR_GYRO_3D is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_ITG3200 is not set
-
-#
-# Inertial measurement units
-#
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_INV_MPU6050_IIO is not set
-
-#
-# Light sensors
-#
-# CONFIG_ADJD_S311 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_HID_SENSOR_ALS is not set
+# CONFIG_IIO is not set
+# CONFIG_PWM is not set
+# CONFIG_IPACK_BUS is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_FMC is not set
#
-# Magnetometer sensors
+# PHY Subsystem
#
-# CONFIG_AK8975 is not set
-# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-CONFIG_PWM=y
-CONFIG_IRQCHIP=y
-# CONFIG_IPACK_BUS is not set
-# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+# CONFIG_POWERCAP is not set
#
# File systems
@@ -3720,6 +3401,7 @@ CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
@@ -3744,9 +3426,10 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
@@ -3764,7 +3447,6 @@ CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
#
# Caches
@@ -3818,22 +3500,6 @@ CONFIG_ECRYPT_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
@@ -3849,7 +3515,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_EXOFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3867,6 +3532,7 @@ CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
@@ -3948,58 +3614,81 @@ CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
+
+#
+# printk and dmesg options
+#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_DYNAMIC_DEBUG is not set
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_SHIRQ is not set
+
+#
+# Debug Lockups and Hangs
+#
# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
@@ -4007,12 +3696,9 @@ CONFIG_FRAME_POINTER=y
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -4020,30 +3706,51 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+# CONFIG_TRACER_SNAPSHOT is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_PROBE_EVENTS is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
-CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_STRICT_DEVMEM is not set
-# CONFIG_ARM_UNWIND is not set
+# CONFIG_ARM_PTDUMP is not set
+CONFIG_STRICT_DEVMEM=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_LL_UART_NONE is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-CONFIG_DEBUG_BCM2708_UART0=y
+# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_PL01X is not set
+# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_EARLY_PRINTK=y
# CONFIG_OC_ETM is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
#
# Security options
@@ -4109,14 +3816,16 @@ CONFIG_PAX_USERCOPY=y
# Memory Protections
#
# CONFIG_GRKERNSEC_KMEM is not set
-CONFIG_GRKERNSEC_JIT_HARDEN=y
# CONFIG_GRKERNSEC_PERF_HARDEN is not set
CONFIG_GRKERNSEC_RAND_THREADSTACK=y
CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
+CONFIG_GRKERNSEC_RANDSTRUCT=y
+CONFIG_GRKERNSEC_RANDSTRUCT_PERFORMANCE=y
CONFIG_GRKERNSEC_KERN_LOCKOUT=y
+CONFIG_GRKERNSEC_OLD_ARM_USERLAND=y
#
# Role Based Access Control Options
@@ -4175,12 +3884,12 @@ CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
+CONFIG_GRKERNSEC_HARDEN_IPC=y
# CONFIG_GRKERNSEC_TPE is not set
#
# Network Protections
#
-CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set
@@ -4201,6 +3910,8 @@ CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=6
CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
@@ -4232,7 +3943,7 @@ CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
@@ -4255,13 +3966,13 @@ CONFIG_CRYPTO_AUTHENC=m
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
+# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
@@ -4282,15 +3993,16 @@ CONFIG_CRYPTO_VMAC=m
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
@@ -4310,7 +4022,7 @@ CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
@@ -4323,9 +4035,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
-CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
@@ -4334,11 +4048,10 @@ CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=m
-CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
-CONFIG_PUBLIC_KEY_ALGO_RSA=m
-CONFIG_X509_CERTIFICATE_PARSER=m
+# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
+# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
# CONFIG_BINARY_PRINTF is not set
#
@@ -4348,12 +4061,14 @@ CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
@@ -4361,20 +4076,24 @@ CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=m
+CONFIG_LZ4HC_COMPRESS=m
+CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
+# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
@@ -4382,10 +4101,12 @@ CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
@@ -4393,10 +4114,13 @@ CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
-CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
-CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
# CONFIG_VIRTUALIZATION is not set
diff --git a/config/kernel/kernel.config.i586-ipfire b/config/kernel/kernel.config.i586-ipfire
index 329d96d..03d0ead 100644
--- a/config/kernel/kernel.config.i586-ipfire
+++ b/config/kernel/kernel.config.i586-ipfire
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.10.40-ipfire Kernel Configuration
+# Linux/x86 3.14.22 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
@@ -28,6 +28,8 @@ CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
@@ -36,7 +38,6 @@ CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
@@ -47,6 +48,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
@@ -54,11 +56,13 @@ CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -70,13 +74,10 @@ CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
-CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
@@ -153,6 +154,7 @@ CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
@@ -165,12 +167,12 @@ CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
@@ -204,6 +206,8 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
@@ -222,7 +226,6 @@ CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
@@ -241,8 +244,14 @@ CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
@@ -260,7 +269,7 @@ CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
@@ -270,12 +279,14 @@ CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
@@ -293,6 +304,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
@@ -313,6 +325,7 @@ CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
@@ -325,7 +338,7 @@ CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
-# CONFIG_X86_WANT_INTEL_MID is not set
+# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
@@ -342,6 +355,7 @@ CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
+# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
@@ -407,6 +421,8 @@ CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
+CONFIG_X86_16BIT=y
+CONFIG_X86_ESPFIX32=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -414,9 +430,8 @@ CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_MICROCODE_INTEL_LIB=y
-CONFIG_MICROCODE_INTEL_EARLY=y
-CONFIG_MICROCODE_EARLY=y
+# CONFIG_MICROCODE_INTEL_EARLY is not set
+# CONFIG_MICROCODE_AMD_EARLY is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
@@ -464,6 +479,9 @@ CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
@@ -480,7 +498,6 @@ CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
@@ -491,6 +508,7 @@ CONFIG_SCHED_HRTICK=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
+# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
@@ -504,9 +522,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
@@ -515,19 +530,18 @@ CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
-# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_I2C=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
@@ -535,7 +549,6 @@ CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
-CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
@@ -550,6 +563,7 @@ CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_ACPI_EXTLOG=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
@@ -563,7 +577,6 @@ CONFIG_APM_CPU_IDLE=y
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
@@ -605,6 +618,10 @@ CONFIG_X86_LONGHAUL=m
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+
+#
+# CPU Idle
+#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
@@ -636,7 +653,6 @@ CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
@@ -648,6 +664,10 @@ CONFIG_PCI_IOV=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
+
+#
+# PCI host controller drivers
+#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
@@ -691,6 +711,7 @@ CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
+CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
@@ -703,7 +724,6 @@ CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
@@ -740,7 +760,6 @@ CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
@@ -773,7 +792,6 @@ CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -787,6 +805,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
@@ -850,7 +869,22 @@ CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
@@ -895,6 +929,7 @@ CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -911,8 +946,10 @@ CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LAYER7=m
# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -947,7 +984,9 @@ CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
@@ -998,6 +1037,11 @@ CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -1005,6 +1049,7 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -1030,6 +1075,10 @@ CONFIG_IP_NF_MATCH_IPP2P=m
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -1043,12 +1092,14 @@ CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -1073,7 +1124,6 @@ CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
@@ -1115,6 +1165,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
+CONFIG_6LOWPAN_IPHC=m
CONFIG_NET_SCHED=y
#
@@ -1140,6 +1191,8 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
@@ -1159,6 +1212,7 @@ CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
@@ -1188,15 +1242,22 @@ CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=y
+CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
-CONFIG_NETPRIO_CGROUP=m
+CONFIG_CGROUP_NET_PRIO=m
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
+CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
@@ -1306,7 +1367,6 @@ CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
-# CONFIG_CMA is not set
#
# Bus devices
@@ -1314,6 +1374,7 @@ CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
@@ -1335,10 +1396,10 @@ CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
-CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
@@ -1372,7 +1433,6 @@ CONFIG_SENSORS_LIS3LV02D=m
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
@@ -1424,6 +1484,14 @@ CONFIG_ALTERA_STAPL=m
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
CONFIG_VMWARE_VMCI=m
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -1491,7 +1559,6 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
@@ -1508,6 +1575,7 @@ CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
@@ -1633,6 +1701,7 @@ CONFIG_SATA_HIGHBANK=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
+CONFIG_SATA_RCAR=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
@@ -1716,14 +1785,14 @@ CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
-# CONFIG_BCACHE_EDEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
-CONFIG_DM_BUFIO=m
+CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
@@ -1731,8 +1800,8 @@ CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
@@ -1741,6 +1810,7 @@ CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
@@ -1770,12 +1840,12 @@ CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
+CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
-CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
@@ -1795,6 +1865,7 @@ CONFIG_IMQ_NUM_DEVS=2
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
@@ -1833,6 +1904,7 @@ CONFIG_ATM_SOLOS=m
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=m
+CONFIG_VHOST=m
#
# Distributed Switch Architecture drivers
@@ -1862,6 +1934,7 @@ CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
+CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
@@ -1937,6 +2010,9 @@ CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=m
+CONFIG_I40E=m
+CONFIG_I40E_VXLAN=y
+CONFIG_I40EVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=m
CONFIG_JME=m
@@ -1951,6 +2027,7 @@ CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
+# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
@@ -1990,6 +2067,7 @@ CONFIG_8139TOO=m
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
+CONFIG_SH_ETH=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
@@ -2005,6 +2083,8 @@ CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
+CONFIG_SMSC911X=m
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
@@ -2091,8 +2171,11 @@ CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
@@ -2152,7 +2235,9 @@ CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
+# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set
+CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
@@ -2163,15 +2248,26 @@ CONFIG_CARL9170_WPC=y
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
+CONFIG_WIL6210_TRACING=y
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+# CONFIG_ATH10K_DEBUG is not set
+# CONFIG_ATH10K_DEBUGFS is not set
+# CONFIG_ATH10K_TRACING is not set
+CONFIG_WCN36XX=m
+# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_B43=m
+CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
@@ -2187,6 +2283,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_USB is not set
@@ -2219,7 +2316,6 @@ CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
@@ -2261,10 +2357,12 @@ CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
+CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
@@ -2273,14 +2371,17 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTLWIFI=m
-# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_PCI=m
+CONFIG_RTLWIFI_USB=m
+# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
@@ -2296,6 +2397,8 @@ CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -2398,8 +2501,8 @@ CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
#
@@ -2544,11 +2647,13 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
@@ -2559,6 +2664,7 @@ CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
+CONFIG_HYPERV_KEYBOARD=m
# CONFIG_GAMEPORT is not set
#
@@ -2589,7 +2695,6 @@ CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_STALDRV is not set
#
# Serial drivers
@@ -2632,6 +2737,7 @@ CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
+CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
@@ -2682,7 +2788,15 @@ CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_MUX is not set
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
@@ -2727,7 +2841,6 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
@@ -2740,6 +2853,7 @@ CONFIG_I2C_SIMTEC=m
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
@@ -2754,11 +2868,6 @@ CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
-
-#
-# Qualcomm MSM SSBI bus support
-#
-# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
@@ -2794,9 +2903,18 @@ CONFIG_PTP_1588_CLOCK=m
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+# CONFIG_PINMUX is not set
+# CONFIG_PINCONF is not set
+# CONFIG_DEBUG_PINCTRL is not set
+CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
@@ -2806,6 +2924,8 @@ CONFIG_GPIO_SYSFS=y
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_SCH311X is not set
CONFIG_GPIO_TS5500=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_ICH=m
@@ -2826,7 +2946,7 @@ CONFIG_GPIO_ICH=m
#
CONFIG_GPIO_CS5535=m
# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
@@ -2834,13 +2954,16 @@ CONFIG_GPIO_CS5535=m
#
# SPI GPIO expanders:
#
-# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
+# LPC GPIO expanders:
+#
+
+#
# MODULbus GPIO expanders:
#
@@ -2890,12 +3013,14 @@ CONFIG_GENERIC_ADC_BATTERY=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
@@ -2935,10 +3060,12 @@ CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
@@ -3042,9 +3169,14 @@ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
+CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_ACPI_INT3403_THERMAL=m
+
+#
+# Texas Instruments thermal drivers
+#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -3053,6 +3185,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
+CONFIG_DW_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
@@ -3093,6 +3226,7 @@ CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
+CONFIG_MEN_A21_WDT=m
#
# ISA-based Watchdog Cards
@@ -3135,7 +3269,14 @@ CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
-# CONFIG_BCMA is not set
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
@@ -3148,6 +3289,7 @@ CONFIG_MFD_CS5535=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
@@ -3160,6 +3302,7 @@ CONFIG_MFD_SM501_GPIO=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
@@ -3199,7 +3342,6 @@ CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
@@ -3282,6 +3424,7 @@ CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
@@ -3298,7 +3441,7 @@ CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
-CONFIG_USB_SN9C102=m
+CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
@@ -3310,8 +3453,9 @@ CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_STK1160=m
+CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160_AC97=y
+CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
@@ -3380,6 +3524,7 @@ CONFIG_DVB_B2C2_FLEXCOP_USB=m
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
@@ -3421,6 +3566,7 @@ CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
@@ -3456,12 +3602,15 @@ CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_VIA_CAMERA is not set
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_SCALE_CROP=m
CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_SH_MOBILE_CSI2=m
CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_V4L_TEST_DRIVERS is not set
#
@@ -3489,7 +3638,6 @@ CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
-# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
@@ -3562,7 +3710,12 @@ CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
-# Miscelaneous helper chips
+# Audio/Video compression chips
+#
+CONFIG_VIDEO_SAA6752HS=m
+
+#
+# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
@@ -3613,6 +3766,7 @@ CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
@@ -3624,6 +3778,7 @@ CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
@@ -3654,8 +3809,7 @@ CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
-CONFIG_DVB_M88DS3103=m
-CONFIG_DVB_M88DC2800=m
+CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
@@ -3737,6 +3891,8 @@ CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
+CONFIG_DVB_DVBSKY_M88DS3103=m
+CONFIG_DVB_M88DC2800=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
@@ -3761,12 +3917,14 @@ CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
+CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
@@ -3787,6 +3945,9 @@ CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_I915_FBDEV=y
+CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y
+# CONFIG_DRM_I915_UMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
@@ -3801,6 +3962,7 @@ CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
+CONFIG_DRM_BOCHS=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
@@ -3841,6 +4003,7 @@ CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
+CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
@@ -3897,6 +4060,7 @@ CONFIG_FB_UDL=m
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
+CONFIG_FB_SIMPLE=y
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
@@ -3909,10 +4073,13 @@ CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_LM3630 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_OT200 is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
#
# Console display driver support
@@ -3924,9 +4091,6 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -3950,6 +4114,7 @@ CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
@@ -4019,7 +4184,6 @@ CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
-CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -4066,9 +4230,7 @@ CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
@@ -4077,19 +4239,20 @@ CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_I915=y
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
@@ -4125,8 +4288,10 @@ CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
+CONFIG_SND_DICE=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
@@ -4162,8 +4327,10 @@ CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
@@ -4195,7 +4362,6 @@ CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
@@ -4212,6 +4378,7 @@ CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
@@ -4227,9 +4394,7 @@ CONFIG_USB_HIDDEV=y
# I2C HID support
#
CONFIG_I2C_HID=m
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -4242,7 +4407,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
@@ -4256,7 +4421,6 @@ CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
@@ -4266,11 +4430,11 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
@@ -4279,7 +4443,9 @@ CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
+# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
@@ -4318,9 +4484,22 @@ CONFIG_USB_STORAGE_ENE_UB6250=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
+# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
+
+#
+# Platform Glue Driver Support
+#
+# CONFIG_USB_DWC3_EXYNOS is not set
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_KEYSTONE=m
+
+#
+# Debugging features
+#
# CONFIG_USB_DWC3_DEBUG is not set
+# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set
@@ -4331,6 +4510,7 @@ CONFIG_USB_CHIPIDEA=m
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@@ -4341,7 +4521,6 @@ CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -4360,16 +4539,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_MXUPORT=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
@@ -4379,9 +4556,7 @@ CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
@@ -4410,6 +4585,7 @@ CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
+CONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
@@ -4419,7 +4595,18 @@ CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
-# CONFIG_USB_PHY is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+CONFIG_USB_OTG_FSM=m
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
@@ -4465,6 +4652,7 @@ CONFIG_MEMSTICK=m
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
+CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
@@ -4490,14 +4678,15 @@ CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_PCA9685=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
-# CONFIG_LEDS_RENESAS_TPU is not set
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
@@ -4571,7 +4760,9 @@ CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
@@ -4610,6 +4801,7 @@ CONFIG_RTC_DRV_DS2404=m
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_MOXART=m
#
# HID Sensor RTC drivers
@@ -4623,8 +4815,9 @@ CONFIG_DMADEVICES=y
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
+CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
-# CONFIG_DW_DMAC_BIG_ENDIAN_IO is not set
+CONFIG_DW_DMAC_PCI=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
@@ -4635,17 +4828,18 @@ CONFIG_DMA_ACPI=y
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
+# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
@@ -4675,14 +4869,16 @@ CONFIG_USBIP_HOST=m
# CONFIG_PRISM2_USB is not set
CONFIG_ECHO=m
# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8821AE is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_RTS5208 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
@@ -4757,10 +4953,7 @@ CONFIG_RTS5139=m
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_GPIO_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
@@ -4785,17 +4978,19 @@ CONFIG_RTS5139=m
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
-# CONFIG_CSR_WIFI is not set
+CONFIG_LTE_GDM724X=m
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_USB_DWC2 is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_DGNC is not set
+# CONFIG_DGAP is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
-CONFIG_CHROMEOS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
@@ -4805,6 +5000,7 @@ CONFIG_FUJITSU_LAPTOP=m
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
+# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
@@ -4839,7 +5035,10 @@ CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
# CONFIG_APPLE_GMUX is not set
+CONFIG_INTEL_RST=m
+# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=m
+# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
@@ -4847,7 +5046,7 @@ CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
-# CONFIG_COMMON_CLK_DEBUG is not set
+# CONFIG_COMMON_CLK_SI5351 is not set
#
# Hardware Spinlock drivers
@@ -4885,6 +5084,7 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
+# CONFIG_BMA180 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
@@ -4892,6 +5092,8 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# Analog to digital converters
#
# CONFIG_MAX1363 is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_VIPERBOARD_ADC is not set
@@ -4904,7 +5106,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
-# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
#
# Digital to analog converters
@@ -4935,6 +5136,11 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_ITG3200 is not set
#
+# Humidity sensors
+#
+# CONFIG_DHT11 is not set
+
+#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
@@ -4943,21 +5149,60 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# Light sensors
#
# CONFIG_ADJD_S311 is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_SENSORS_LM3533 is not set
+# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
-# CONFIG_HID_SENSOR_ALS is not set
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
+# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
+
+#
+# Inclinometer sensors
+#
+# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
+
+#
+# Triggers - standalone
+#
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_MPL3115 is not set
+# CONFIG_IIO_ST_PRESS is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_TMP006 is not set
+# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
-# CONFIG_RESET_CONTROLLER is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
#
# Firmware Drivers
@@ -4969,6 +5214,7 @@ CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
@@ -4979,6 +5225,7 @@ CONFIG_ISCSI_IBFT=m
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
+CONFIG_UEFI_CPER=y
#
# File systems
@@ -5014,6 +5261,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
+CONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
@@ -5034,7 +5282,6 @@ CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
#
# Caches
@@ -5117,10 +5364,13 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="ipfire.org"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
@@ -5129,6 +5379,7 @@ CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
@@ -5213,64 +5464,92 @@ CONFIG_DLM=m
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+
+#
+# printk and dmesg options
+#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
@@ -5280,16 +5559,11 @@ CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
@@ -5332,24 +5606,32 @@ CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
@@ -5369,6 +5651,7 @@ CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
+# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
@@ -5427,6 +5710,7 @@ CONFIG_PAX_RANDMMAP=y
#
# Miscellaneous hardening features
#
+CONFIG_PAX_MEMORY_SANITIZE=y
CONFIG_PAX_MEMORY_STACKLEAK=y
CONFIG_PAX_MEMORY_STRUCTLEAK=y
# CONFIG_PAX_MEMORY_UDEREF is not set
@@ -5448,6 +5732,8 @@ CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
+CONFIG_GRKERNSEC_RANDSTRUCT=y
+CONFIG_GRKERNSEC_RANDSTRUCT_PERFORMANCE=y
CONFIG_GRKERNSEC_KERN_LOCKOUT=y
#
@@ -5507,12 +5793,12 @@ CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
+CONFIG_GRKERNSEC_HARDEN_IPC=y
# CONFIG_GRKERNSEC_TPE is not set
#
# Network Protections
#
-CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set
@@ -5533,6 +5819,8 @@ CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=6
CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
@@ -5585,7 +5873,7 @@ CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
@@ -5621,6 +5909,7 @@ CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
+CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -5668,6 +5957,8 @@ CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
@@ -5676,6 +5967,7 @@ CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
@@ -5683,6 +5975,9 @@ CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
@@ -5696,6 +5991,7 @@ CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
@@ -5712,10 +6008,12 @@ CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
@@ -5730,10 +6028,14 @@ CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=m
+CONFIG_LZ4HC_COMPRESS=m
+CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
@@ -5748,11 +6050,13 @@ CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
@@ -5768,3 +6072,7 @@ CONFIG_CORDIC=m
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/config/kernel/kernel.config.i586-ipfire-pae b/config/kernel/kernel.config.i586-ipfire-pae
index f395f31..ff3a9ee 100644
--- a/config/kernel/kernel.config.i586-ipfire-pae
+++ b/config/kernel/kernel.config.i586-ipfire-pae
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.10.40-ipfire Kernel Configuration
+# Linux/x86 3.14.22 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
@@ -28,6 +28,8 @@ CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
@@ -36,7 +38,6 @@ CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
-CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
@@ -47,6 +48,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
+# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
@@ -54,11 +56,13 @@ CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
+# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -70,13 +74,10 @@ CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
-CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
-CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
@@ -153,6 +154,7 @@ CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
@@ -165,12 +167,12 @@ CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
@@ -204,6 +206,8 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
@@ -221,7 +225,6 @@ CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
@@ -240,8 +243,14 @@ CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR_NONE is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
@@ -259,7 +268,7 @@ CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
@@ -269,12 +278,14 @@ CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_CMDLINE_PARSER is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
@@ -292,6 +303,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_CMDLINE_PARTITION is not set
#
# IO Schedulers
@@ -312,6 +324,7 @@ CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
@@ -324,7 +337,7 @@ CONFIG_X86_MPPARSE=y
CONFIG_X86_BIGSMP=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
-# CONFIG_X86_WANT_INTEL_MID is not set
+# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
@@ -347,6 +360,7 @@ CONFIG_XEN_MAX_DOMAIN_MEMORY=64
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_KVM_GUEST=y
+# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
@@ -417,6 +431,8 @@ CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
+CONFIG_X86_16BIT=y
+CONFIG_X86_ESPFIX32=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -424,9 +440,8 @@ CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_MICROCODE_INTEL_LIB=y
-CONFIG_MICROCODE_INTEL_EARLY=y
-CONFIG_MICROCODE_EARLY=y
+# CONFIG_MICROCODE_INTEL_EARLY is not set
+# CONFIG_MICROCODE_AMD_EARLY is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
@@ -458,6 +473,7 @@ CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
@@ -476,6 +492,9 @@ CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
+# CONFIG_CMA is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
@@ -492,7 +511,6 @@ CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
@@ -503,6 +521,7 @@ CONFIG_SCHED_HRTICK=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
+# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
@@ -517,8 +536,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
@@ -527,19 +544,18 @@ CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
-# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_I2C=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
@@ -547,7 +563,6 @@ CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
-CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
@@ -562,6 +577,7 @@ CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_ACPI_EXTLOG=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
@@ -575,7 +591,6 @@ CONFIG_APM_CPU_IDLE=y
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
@@ -617,6 +632,10 @@ CONFIG_X86_LONGHAUL=m
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
+
+#
+# CPU Idle
+#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
@@ -649,7 +668,6 @@ CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
-CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
@@ -662,6 +680,10 @@ CONFIG_PCI_IOV=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
+
+#
+# PCI host controller drivers
+#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
@@ -703,6 +725,7 @@ CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
+CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
@@ -715,7 +738,6 @@ CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
-CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
@@ -752,7 +774,6 @@ CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_INET_AH=m
@@ -785,7 +806,6 @@ CONFIG_DEFAULT_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -799,6 +819,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
@@ -820,7 +841,7 @@ CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
-CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
@@ -862,7 +883,22 @@ CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_SYNPROXY=m
+CONFIG_NF_TABLES=y
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_REJECT_INET=m
+CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y
#
@@ -907,6 +943,7 @@ CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -923,8 +960,10 @@ CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LAYER7=m
# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -959,7 +998,9 @@ CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
@@ -1010,6 +1051,11 @@ CONFIG_IP_VS_PE_SIP=m
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_NF_TABLES_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_REJECT_IPV4=m
+CONFIG_NF_TABLES_ARP=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -1017,6 +1063,7 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -1042,6 +1089,10 @@ CONFIG_IP_NF_MATCH_IPP2P=m
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_NF_TABLES_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_REJECT_IPV6=m
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -1055,12 +1106,14 @@ CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -1085,7 +1138,6 @@ CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
@@ -1127,6 +1179,7 @@ CONFIG_LLC=y
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
+CONFIG_6LOWPAN_IPHC=m
CONFIG_NET_SCHED=y
#
@@ -1152,6 +1205,8 @@ CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
@@ -1171,6 +1226,7 @@ CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
@@ -1200,15 +1256,22 @@ CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
+CONFIG_OPENVSWITCH_GRE=y
+CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
+CONFIG_NET_MPLS_GSO=m
+CONFIG_HSR=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
-CONFIG_NETPRIO_CGROUP=m
+CONFIG_CGROUP_NET_PRIO=m
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
+CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
@@ -1325,6 +1388,7 @@ CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
@@ -1346,10 +1410,10 @@ CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
-CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
@@ -1385,7 +1449,6 @@ CONFIG_SENSORS_LIS3LV02D=m
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
@@ -1437,6 +1500,14 @@ CONFIG_ALTERA_STAPL=m
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
CONFIG_VMWARE_VMCI=m
+
+#
+# Intel MIC Host Driver
+#
+
+#
+# Intel MIC Card Driver
+#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -1504,7 +1575,6 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=4000
@@ -1521,6 +1591,7 @@ CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
+CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
@@ -1646,6 +1717,7 @@ CONFIG_SATA_HIGHBANK=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
+CONFIG_SATA_RCAR=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
@@ -1729,14 +1801,14 @@ CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
-# CONFIG_BCACHE_EDEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
-CONFIG_DM_BUFIO=m
+CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
+# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
@@ -1744,8 +1816,8 @@ CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_MIRROR=y
-CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
@@ -1754,6 +1826,7 @@ CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
@@ -1784,12 +1857,12 @@ CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
+CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
-CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
@@ -1809,6 +1882,7 @@ CONFIG_IMQ_NUM_DEVS=2
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
@@ -1847,6 +1921,7 @@ CONFIG_ATM_SOLOS=m
#
CONFIG_VHOST_NET=m
CONFIG_VHOST_RING=m
+CONFIG_VHOST=m
#
# Distributed Switch Architecture drivers
@@ -1876,6 +1951,7 @@ CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
+CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
@@ -1951,6 +2027,9 @@ CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=m
+CONFIG_I40E=m
+CONFIG_I40E_VXLAN=y
+CONFIG_I40EVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=m
CONFIG_JME=m
@@ -1965,6 +2044,7 @@ CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
+# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851_MLL=m
@@ -2004,6 +2084,7 @@ CONFIG_8139TOO=m
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
+CONFIG_SH_ETH=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
@@ -2019,6 +2100,8 @@ CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
+CONFIG_SMSC911X=m
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
@@ -2105,8 +2188,11 @@ CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9700=m
+CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
@@ -2166,7 +2252,9 @@ CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
+# CONFIG_ATH9K_WOW is not set
# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set
+CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
@@ -2177,15 +2265,26 @@ CONFIG_CARL9170_WPC=y
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
+CONFIG_WIL6210_TRACING=y
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+# CONFIG_ATH10K_DEBUG is not set
+# CONFIG_ATH10K_DEBUGFS is not set
+# CONFIG_ATH10K_TRACING is not set
+CONFIG_WCN36XX=m
+# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_B43=m
+CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_SDIO=y
+CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
+CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
@@ -2201,6 +2300,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_USB is not set
@@ -2233,7 +2333,6 @@ CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
@@ -2275,10 +2374,12 @@ CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
+CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
+CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
@@ -2287,14 +2388,17 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
-CONFIG_RTLWIFI=m
-# CONFIG_RTLWIFI_DEBUG is not set
+CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192CU=m
+CONFIG_RTLWIFI=m
+CONFIG_RTLWIFI_PCI=m
+CONFIG_RTLWIFI_USB=m
+# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
@@ -2310,6 +2414,8 @@ CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -2414,8 +2520,8 @@ CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
#
@@ -2561,11 +2667,13 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
@@ -2576,6 +2684,7 @@ CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
+CONFIG_HYPERV_KEYBOARD=m
# CONFIG_GAMEPORT is not set
#
@@ -2606,7 +2715,6 @@ CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_STALDRV is not set
#
# Serial drivers
@@ -2649,6 +2757,7 @@ CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
+CONFIG_SERIAL_FSL_LPUART=m
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
@@ -2701,7 +2810,15 @@ CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_MUX is not set
+CONFIG_I2C_MUX=m
+
+#
+# Multiplexer I2C Chip support
+#
+CONFIG_I2C_MUX_GPIO=m
+CONFIG_I2C_MUX_PCA9541=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
@@ -2746,7 +2863,6 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
@@ -2759,6 +2875,7 @@ CONFIG_I2C_SIMTEC=m
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
@@ -2773,11 +2890,6 @@ CONFIG_SCx200_ACB=m
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
-
-#
-# Qualcomm MSM SSBI bus support
-#
-# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
@@ -2813,9 +2925,18 @@ CONFIG_PTP_1588_CLOCK=m
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
+CONFIG_PINCTRL=y
+
+#
+# Pin controllers
+#
+# CONFIG_PINMUX is not set
+# CONFIG_PINCONF is not set
+# CONFIG_DEBUG_PINCTRL is not set
+CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
@@ -2825,6 +2946,8 @@ CONFIG_GPIO_SYSFS=y
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
+CONFIG_GPIO_F7188X=m
+CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_TS5500=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_ICH=m
@@ -2845,7 +2968,7 @@ CONFIG_GPIO_ICH=m
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
@@ -2853,13 +2976,16 @@ CONFIG_GPIO_ICH=m
#
# SPI GPIO expanders:
#
-# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
+# LPC GPIO expanders:
+#
+
+#
# MODULbus GPIO expanders:
#
@@ -2909,12 +3035,14 @@ CONFIG_GENERIC_ADC_BATTERY=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
@@ -2954,10 +3082,12 @@ CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
+CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
+CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
@@ -3061,9 +3191,14 @@ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
+CONFIG_X86_PKG_TEMP_THERMAL=m
+CONFIG_ACPI_INT3403_THERMAL=m
+
+#
+# Texas Instruments thermal drivers
+#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
@@ -3072,6 +3207,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
+CONFIG_DW_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
@@ -3111,6 +3247,7 @@ CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
+CONFIG_MEN_A21_WDT=m
CONFIG_XEN_WDT=m
#
@@ -3154,7 +3291,14 @@ CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
-# CONFIG_BCMA is not set
+CONFIG_BCMA=m
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
@@ -3167,6 +3311,7 @@ CONFIG_MFD_CS5535=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
@@ -3179,6 +3324,7 @@ CONFIG_MFD_SM501_GPIO=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
@@ -3218,7 +3364,6 @@ CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
-CONFIG_VIDEO_V4L2_INT_DEVICE=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
@@ -3301,6 +3446,7 @@ CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
@@ -3317,7 +3463,7 @@ CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
-CONFIG_USB_SN9C102=m
+CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
@@ -3329,8 +3475,9 @@ CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_STK1160=m
+CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160_AC97=y
+CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
@@ -3399,6 +3546,7 @@ CONFIG_DVB_B2C2_FLEXCOP_USB=m
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
@@ -3440,6 +3588,7 @@ CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
@@ -3475,12 +3624,15 @@ CONFIG_VIDEO_CAFE_CCIC=m
# CONFIG_VIDEO_VIA_CAMERA is not set
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_SCALE_CROP=m
CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_SH_MOBILE_CSI2=m
CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_V4L_TEST_DRIVERS is not set
#
@@ -3508,7 +3660,6 @@ CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
-# CONFIG_SMS_SIANO_DEBUGFS is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
@@ -3581,7 +3732,12 @@ CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
-# Miscelaneous helper chips
+# Audio/Video compression chips
+#
+CONFIG_VIDEO_SAA6752HS=m
+
+#
+# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
@@ -3632,6 +3788,7 @@ CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
+CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
@@ -3643,6 +3800,7 @@ CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
+CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
@@ -3673,7 +3831,7 @@ CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
-CONFIG_DVB_M88DS3103=m
+CONFIG_DVB_CX24117=m
CONFIG_DVB_M88DC2800=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
@@ -3780,12 +3938,14 @@ CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
+CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
+CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
@@ -3806,6 +3966,9 @@ CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
+CONFIG_DRM_I915_FBDEV=y
+CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y
+# CONFIG_DRM_I915_UMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
@@ -3820,6 +3983,7 @@ CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
+CONFIG_DRM_BOCHS=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HDMI=y
@@ -3860,6 +4024,7 @@ CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
+CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
@@ -3917,6 +4082,7 @@ CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
+CONFIG_FB_SIMPLE=y
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
@@ -3929,9 +4095,12 @@ CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_LM3630 is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
#
# Console display driver support
@@ -3943,9 +4112,6 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -3969,6 +4135,7 @@ CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
@@ -4038,7 +4205,6 @@ CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
-CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -4085,9 +4251,7 @@ CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
-CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
@@ -4096,19 +4260,20 @@ CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_ANALOG=y
-CONFIG_SND_HDA_CODEC_SIGMATEL=y
-CONFIG_SND_HDA_CODEC_VIA=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-CONFIG_SND_HDA_CODEC_CIRRUS=y
-CONFIG_SND_HDA_CODEC_CONEXANT=y
-CONFIG_SND_HDA_CODEC_CA0110=y
-CONFIG_SND_HDA_CODEC_CA0132=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_ANALOG=m
+CONFIG_SND_HDA_CODEC_SIGMATEL=m
+CONFIG_SND_HDA_CODEC_VIA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_HDA_I915=y
+CONFIG_SND_HDA_CODEC_CIRRUS=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+CONFIG_SND_HDA_CODEC_CA0110=m
+CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
-CONFIG_SND_HDA_CODEC_CMEDIA=y
-CONFIG_SND_HDA_CODEC_SI3054=y
-CONFIG_SND_HDA_GENERIC=y
+CONFIG_SND_HDA_CODEC_CMEDIA=m
+CONFIG_SND_HDA_CODEC_SI3054=m
+CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
@@ -4144,8 +4309,10 @@ CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
+CONFIG_SND_USB_HIFACE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
+# CONFIG_SND_DICE is not set
CONFIG_SND_FIREWIRE_SPEAKERS=m
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_SCS1X is not set
@@ -4181,8 +4348,10 @@ CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
@@ -4214,7 +4383,6 @@ CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
@@ -4231,6 +4399,7 @@ CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
@@ -4246,9 +4415,7 @@ CONFIG_USB_HIDDEV=y
# I2C HID support
#
CONFIG_I2C_HID=m
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -4261,7 +4428,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
@@ -4275,7 +4442,6 @@ CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=m
-# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
@@ -4285,11 +4451,11 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
+# CONFIG_USB_FUSBH200_HCD is not set
+# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_PLATFORM=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
@@ -4298,7 +4464,9 @@ CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
+CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
+# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
@@ -4337,9 +4505,22 @@ CONFIG_USB_STORAGE_ENE_UB6250=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
+# CONFIG_USB_MUSB_HDRC is not set
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
+
+#
+# Platform Glue Driver Support
+#
+# CONFIG_USB_DWC3_EXYNOS is not set
+CONFIG_USB_DWC3_PCI=m
+CONFIG_USB_DWC3_KEYSTONE=m
+
+#
+# Debugging features
+#
# CONFIG_USB_DWC3_DEBUG is not set
+# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set
@@ -4350,6 +4531,7 @@ CONFIG_USB_CHIPIDEA=m
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
@@ -4360,7 +4542,6 @@ CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -4379,16 +4560,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_MXUPORT=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
@@ -4398,9 +4577,7 @@ CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
@@ -4429,6 +4606,7 @@ CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
+CONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
@@ -4438,7 +4616,18 @@ CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
-# CONFIG_USB_PHY is not set
+
+#
+# USB Physical Layer drivers
+#
+CONFIG_USB_PHY=y
+CONFIG_USB_OTG_FSM=m
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_GADGET is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
@@ -4484,6 +4673,7 @@ CONFIG_MEMSTICK=m
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
+CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
@@ -4509,14 +4699,15 @@ CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_PCA9633=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_PCA9685=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_DELL_NETBOOKS=m
-# CONFIG_LEDS_RENESAS_TPU is not set
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
@@ -4590,7 +4781,9 @@ CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
+CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
@@ -4629,6 +4822,7 @@ CONFIG_RTC_DRV_DS2404=m
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_MOXART=m
#
# HID Sensor RTC drivers
@@ -4642,8 +4836,9 @@ CONFIG_DMADEVICES=y
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=m
+CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
-# CONFIG_DW_DMAC_BIG_ENDIAN_IO is not set
+CONFIG_DW_DMAC_PCI=m
CONFIG_TIMB_DMA=m
CONFIG_PCH_DMA=m
CONFIG_DMA_ENGINE=y
@@ -4654,17 +4849,18 @@ CONFIG_DMA_ACPI=y
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
+CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
+# CONFIG_UIO_MF624 is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
@@ -4715,14 +4911,16 @@ CONFIG_USBIP_HOST=m
# CONFIG_PRISM2_USB is not set
CONFIG_ECHO=m
# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8821AE is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
+# CONFIG_RTS5208 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
@@ -4797,10 +4995,7 @@ CONFIG_RTS5139=m
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_GPIO_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
@@ -4825,17 +5020,19 @@ CONFIG_RTS5139=m
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
-# CONFIG_CSR_WIFI is not set
+CONFIG_LTE_GDM724X=m
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_USB_DWC2 is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_DGNC is not set
+# CONFIG_DGAP is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
-CONFIG_CHROMEOS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
@@ -4845,6 +5042,7 @@ CONFIG_FUJITSU_LAPTOP=m
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
+# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
@@ -4879,7 +5077,10 @@ CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
# CONFIG_APPLE_GMUX is not set
+CONFIG_INTEL_RST=m
+# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=m
+# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
@@ -4887,7 +5088,7 @@ CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
-# CONFIG_COMMON_CLK_DEBUG is not set
+# CONFIG_COMMON_CLK_SI5351 is not set
#
# Hardware Spinlock drivers
@@ -4925,6 +5126,7 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
+# CONFIG_BMA180 is not set
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
@@ -4932,6 +5134,8 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# Analog to digital converters
#
# CONFIG_MAX1363 is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_VIPERBOARD_ADC is not set
@@ -4944,7 +5148,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
-# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
#
# Digital to analog converters
@@ -4975,6 +5178,11 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_ITG3200 is not set
#
+# Humidity sensors
+#
+# CONFIG_DHT11 is not set
+
+#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
@@ -4983,21 +5191,60 @@ CONFIG_HID_SENSOR_IIO_TRIGGER=m
# Light sensors
#
# CONFIG_ADJD_S311 is not set
+# CONFIG_APDS9300 is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_SENSORS_LM3533 is not set
+# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set
-# CONFIG_HID_SENSOR_ALS is not set
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
+# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
+
+#
+# Inclinometer sensors
+#
+# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
+
+#
+# Triggers - standalone
+#
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+
+#
+# Pressure sensors
+#
+# CONFIG_MPL3115 is not set
+# CONFIG_IIO_ST_PRESS is not set
+
+#
+# Temperature sensors
+#
+# CONFIG_TMP006 is not set
+# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
-# CONFIG_RESET_CONTROLLER is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_FMC is not set
+
+#
+# PHY Subsystem
+#
+CONFIG_GENERIC_PHY=y
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_POWERCAP is not set
#
# Firmware Drivers
@@ -5009,6 +5256,7 @@ CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
+CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set
@@ -5019,6 +5267,7 @@ CONFIG_ISCSI_IBFT=m
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
+CONFIG_UEFI_CPER=y
#
# File systems
@@ -5054,6 +5303,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
+CONFIG_BTRFS_ASSERT=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
@@ -5074,7 +5324,6 @@ CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
-CONFIG_GENERIC_ACL=y
#
# Caches
@@ -5157,10 +5406,13 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="ipfire.org"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
@@ -5169,6 +5421,7 @@ CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
@@ -5253,64 +5506,92 @@ CONFIG_DLM=m
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+
+#
+# printk and dmesg options
+#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_DYNAMIC_DEBUG=y
+
+#
+# Compile-time checks and compiler options
+#
+# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
+
+#
+# Memory Debugging
+#
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y
+
+#
+# Debug Lockups and Hangs
+#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-# CONFIG_DEBUG_KMEMLEAK is not set
+
+#
+# Lock Debugging (spinlocks, mutexes, etc...)
+#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
#
# RCU Debugging
@@ -5320,16 +5601,11 @@ CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
@@ -5372,24 +5648,32 @@ CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+
+#
+# Runtime Testing
+#
+# CONFIG_LKDTM is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_BUILD_DOCSRC is not set
-CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
@@ -5409,6 +5693,7 @@ CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
+# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
@@ -5466,6 +5751,7 @@ CONFIG_PAX_RANDMMAP=y
#
# Miscellaneous hardening features
#
+CONFIG_PAX_MEMORY_SANITIZE=y
CONFIG_PAX_MEMORY_STACKLEAK=y
CONFIG_PAX_MEMORY_STRUCTLEAK=y
CONFIG_PAX_REFCOUNT=y
@@ -5486,6 +5772,8 @@ CONFIG_GRKERNSEC_PROC_MEMMAP=y
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODHARDEN=y
CONFIG_GRKERNSEC_HIDESYM=y
+CONFIG_GRKERNSEC_RANDSTRUCT=y
+CONFIG_GRKERNSEC_RANDSTRUCT_PERFORMANCE=y
CONFIG_GRKERNSEC_KERN_LOCKOUT=y
#
@@ -5545,12 +5833,12 @@ CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_HARDEN_PTRACE=y
CONFIG_GRKERNSEC_PTRACE_READEXEC=y
CONFIG_GRKERNSEC_SETXID=y
+CONFIG_GRKERNSEC_HARDEN_IPC=y
# CONFIG_GRKERNSEC_TPE is not set
#
# Network Protections
#
-CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_BLACKHOLE=y
CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
# CONFIG_GRKERNSEC_SOCKET is not set
@@ -5571,6 +5859,8 @@ CONFIG_GRKERNSEC_NO_SIMULT_CONNECT=y
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=6
CONFIG_KEYS=y
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
@@ -5623,7 +5913,7 @@ CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ABLK_HELPER_X86=y
+CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
@@ -5659,6 +5949,7 @@ CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
+CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -5706,6 +5997,8 @@ CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
@@ -5714,11 +6007,15 @@ CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
+CONFIG_CRYPTO_DEV_CCP=y
+CONFIG_CRYPTO_DEV_CCP_DD=m
+CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_PUBLIC_KEY_ALGO_RSA=m
@@ -5732,6 +6029,7 @@ CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
+CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
@@ -5748,10 +6046,12 @@ CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
@@ -5766,10 +6066,14 @@ CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
+# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+CONFIG_LZ4_COMPRESS=m
+CONFIG_LZ4HC_COMPRESS=m
+CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
@@ -5784,11 +6088,13 @@ CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
+CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
@@ -5804,3 +6110,7 @@ CONFIG_CORDIC=m
CONFIG_MPILIB=m
CONFIG_OID_REGISTRY=m
CONFIG_UCS2_STRING=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/config/rootfiles/common/i586/glibc b/config/rootfiles/common/i586/glibc
index 31fe5fd..d34a8f5 100644
--- a/config/rootfiles/common/i586/glibc
+++ b/config/rootfiles/common/i586/glibc
@@ -7058,6 +7058,7 @@ usr/lib/locale
#usr/share/i18n/locales/eu_ES@euro
#usr/share/i18n/locales/fa_IR
#usr/share/i18n/locales/fi_FI
+#usr/share/i18n/locales/fi_FI.orig
#usr/share/i18n/locales/fi_FI@euro
#usr/share/i18n/locales/fil_PH
#usr/share/i18n/locales/fo_FO
diff --git a/config/rootfiles/common/i586/linux b/config/rootfiles/common/i586/linux
index e6ce913..aec5857 100644
--- a/config/rootfiles/common/i586/linux
+++ b/config/rootfiles/common/i586/linux
@@ -16,7 +16,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/arch/x86/crypto/serpent-sse2-i586.ko
#lib/modules/KVER-ipfire/kernel/arch/x86/crypto/twofish-i586.ko
#lib/modules/KVER-ipfire/kernel/arch/x86/kernel
-#lib/modules/KVER-ipfire/kernel/arch/x86/kernel/microcode.ko
+#lib/modules/KVER-ipfire/kernel/arch/x86/kernel/cpu
+#lib/modules/KVER-ipfire/kernel/arch/x86/kernel/cpu/microcode
+#lib/modules/KVER-ipfire/kernel/arch/x86/kernel/cpu/microcode/microcode.ko
#lib/modules/KVER-ipfire/kernel/arch/x86/kernel/test_nx.ko
#lib/modules/KVER-ipfire/kernel/arch/x86/kvm
#lib/modules/KVER-ipfire/kernel/arch/x86/kvm/kvm-amd.ko
@@ -61,6 +63,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/crypto/gcm.ko
#lib/modules/KVER-ipfire/kernel/crypto/ghash-generic.ko
#lib/modules/KVER-ipfire/kernel/crypto/khazad.ko
+#lib/modules/KVER-ipfire/kernel/crypto/lz4.ko
+#lib/modules/KVER-ipfire/kernel/crypto/lz4hc.ko
#lib/modules/KVER-ipfire/kernel/crypto/lzo.ko
#lib/modules/KVER-ipfire/kernel/crypto/md4.ko
#lib/modules/KVER-ipfire/kernel/crypto/michael_mic.ko
@@ -87,7 +91,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/crypto/zlib.ko
#lib/modules/KVER-ipfire/kernel/drivers
#lib/modules/KVER-ipfire/kernel/drivers/acpi
-#lib/modules/KVER-ipfire/kernel/drivers/acpi/acpi_i2c.ko
+#lib/modules/KVER-ipfire/kernel/drivers/acpi/acpi_extlog.ko
#lib/modules/KVER-ipfire/kernel/drivers/acpi/acpi_ipmi.ko
#lib/modules/KVER-ipfire/kernel/drivers/acpi/acpi_pad.ko
#lib/modules/KVER-ipfire/kernel/drivers/acpi/custom_method.ko
@@ -154,6 +158,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_nv.ko
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_promise.ko
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_qstor.ko
+#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_rcar.ko
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_sil.ko
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_sil24.ko
#lib/modules/KVER-ipfire/kernel/drivers/ata/sata_sis.ko
@@ -181,10 +186,11 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/base
#lib/modules/KVER-ipfire/kernel/drivers/base/regmap
#lib/modules/KVER-ipfire/kernel/drivers/base/regmap/regmap-i2c.ko
+#lib/modules/KVER-ipfire/kernel/drivers/bcma
+#lib/modules/KVER-ipfire/kernel/drivers/bcma/bcma.ko
#lib/modules/KVER-ipfire/kernel/drivers/block
#lib/modules/KVER-ipfire/kernel/drivers/block/DAC960.ko
#lib/modules/KVER-ipfire/kernel/drivers/block/cciss.ko
-#lib/modules/KVER-ipfire/kernel/drivers/block/cpqarray.ko
#lib/modules/KVER-ipfire/kernel/drivers/block/cryptoloop.ko
#lib/modules/KVER-ipfire/kernel/drivers/block/floppy.ko
#lib/modules/KVER-ipfire/kernel/drivers/block/mtip32xx
@@ -249,7 +255,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/gx-suspmod.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/longhaul.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/longrun.ko
-#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/mperf.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/p4-clockmod.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/pcc-cpufreq.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/powernow-k6.ko
@@ -259,6 +264,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/speedstep-lib.ko
#lib/modules/KVER-ipfire/kernel/drivers/cpufreq/speedstep-smi.ko
#lib/modules/KVER-ipfire/kernel/drivers/crypto
+#lib/modules/KVER-ipfire/kernel/drivers/crypto/ccp
+#lib/modules/KVER-ipfire/kernel/drivers/crypto/ccp/ccp-crypto.ko
+#lib/modules/KVER-ipfire/kernel/drivers/crypto/ccp/ccp.ko
#lib/modules/KVER-ipfire/kernel/drivers/crypto/geode-aes.ko
#lib/modules/KVER-ipfire/kernel/drivers/crypto/hifn_795x.ko
#lib/modules/KVER-ipfire/kernel/drivers/crypto/padlock-aes.ko
@@ -266,7 +274,10 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/dca
#lib/modules/KVER-ipfire/kernel/drivers/dca/dca.ko
#lib/modules/KVER-ipfire/kernel/drivers/dma
-#lib/modules/KVER-ipfire/kernel/drivers/dma/dw_dmac.ko
+#lib/modules/KVER-ipfire/kernel/drivers/dma/dw
+#lib/modules/KVER-ipfire/kernel/drivers/dma/dw/dw_dmac.ko
+#lib/modules/KVER-ipfire/kernel/drivers/dma/dw/dw_dmac_core.ko
+#lib/modules/KVER-ipfire/kernel/drivers/dma/dw/dw_dmac_pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/dma/ioat
#lib/modules/KVER-ipfire/kernel/drivers/dma/ioat/ioatdma.ko
#lib/modules/KVER-ipfire/kernel/drivers/dma/pch_dma.ko
@@ -304,6 +315,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/ast
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/ast/ast.ko
+#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/bochs
+#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/bochs/bochs-drm.ko
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/cirrus
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/cirrus/cirrus.ko
#lib/modules/KVER-ipfire/kernel/drivers/gpu/drm/drm.ko
@@ -364,6 +377,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat-kovaplus.ko
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat-lua.ko
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat-pyra.ko
+#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat-ryos.ko
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat-savu.ko
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-roccat.ko
#lib/modules/KVER-ipfire/kernel/drivers/hid/hid-saitek.ko
@@ -424,9 +438,11 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/fam15h_power.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/fschmd.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/g760a.ko
+#lib/modules/KVER-ipfire/kernel/drivers/hwmon/g762.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/gl518sm.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/gl520sm.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/hih6130.ko
+#lib/modules/KVER-ipfire/kernel/drivers/hwmon/htu21.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/hwmon-vid.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/i5k_amb.ko
#lib/modules/KVER-ipfire/kernel/drivers/hwmon/ibmaem.ko
@@ -530,6 +546,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-parport.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-pca-platform.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-piix4.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-robotfuzz-osif.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-scmi.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-simtec.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/i2c-sis5595.ko
@@ -542,7 +559,13 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/i2c/busses/scx200_acb.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/i2c-core.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/i2c-dev.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/i2c-mux.ko
#lib/modules/KVER-ipfire/kernel/drivers/i2c/i2c-smbus.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/muxes
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/muxes/i2c-mux-gpio.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/muxes/i2c-mux-pca9541.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/muxes/i2c-mux-pca954x.ko
+#lib/modules/KVER-ipfire/kernel/drivers/i2c/muxes/i2c-mux-pinctrl.ko
#lib/modules/KVER-ipfire/kernel/drivers/iio
#lib/modules/KVER-ipfire/kernel/drivers/iio/common
#lib/modules/KVER-ipfire/kernel/drivers/iio/common/hid-sensors
@@ -562,6 +585,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/ati_remote2.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/atlas_btns.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/cm109.ko
+#lib/modules/KVER-ipfire/kernel/drivers/input/misc/ideapad_slidebar.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/keyspan_remote.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/pcspkr.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/misc/powermate.ko
@@ -581,6 +605,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/input/serio
#lib/modules/KVER-ipfire/kernel/drivers/input/serio/altera_ps2.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/serio/arc_ps2.ko
+#lib/modules/KVER-ipfire/kernel/drivers/input/serio/hyperv-keyboard.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/serio/serio_raw.ko
#lib/modules/KVER-ipfire/kernel/drivers/input/sparse-keymap.ko
#lib/modules/KVER-ipfire/kernel/drivers/isdn
@@ -651,11 +676,13 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-lp5523.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-lp5562.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-lp55xx-common.ko
+#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-lp8501.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-lt3593.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-ot200.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-pca9532.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-pca955x.ko
-#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-pca9633.ko
+#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-pca963x.ko
+#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-pca9685.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-ss4200.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/leds-tca6507.ko
#lib/modules/KVER-ipfire/kernel/drivers/leds/trigger
@@ -672,7 +699,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/md/bcache
#lib/modules/KVER-ipfire/kernel/drivers/md/bcache/bcache.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-bio-prison.ko
-#lib/modules/KVER-ipfire/kernel/drivers/md/dm-bufio.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-cache-cleaner.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-cache-mq.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-cache.ko
@@ -683,6 +709,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-raid.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-round-robin.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-service-time.ko
+#lib/modules/KVER-ipfire/kernel/drivers/md/dm-switch.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/dm-verity.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/faulty.ko
#lib/modules/KVER-ipfire/kernel/drivers/md/linear.ko
@@ -723,6 +750,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cx24110.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cx24113.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cx24116.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cx24117.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cx24123.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/cxd2820r.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/dib0070.ko
@@ -737,6 +765,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/drxk.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/ds3000.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/dvb-pll.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/dvbsky_m88ds3103.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/ec100.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/isl6405.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/dvb-frontends/isl6421.ko
@@ -820,6 +849,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/mt9v011.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/ov7670.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/saa6588.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/saa6752hs.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/saa7110.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/saa7115.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/i2c/saa7127.ko
@@ -900,7 +930,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/pt1
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/pt1/earth-pt1.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/saa7134
-#lib/modules/KVER-ipfire/kernel/drivers/media/pci/saa7134/saa6752hs.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/saa7134/saa7134-alsa.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/saa7134/saa7134-dvb.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/pci/saa7134/saa7134-empress.ko
@@ -931,12 +960,16 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/marvell-ccic/cafe_ccic.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/sh_veu.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera
+#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/rcar_vin.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/sh_mobile_csi2.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/soc_camera.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/soc_camera_platform.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/soc_mediabus.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/platform/soc_camera/soc_scale_crop.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/platform/timblogiw.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/platform/vsp1
+#lib/modules/KVER-ipfire/kernel/drivers/media/platform/vsp1/vsp1.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/ati_remote.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/ene_ir.ko
@@ -977,6 +1010,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-budget-ci-old.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-cinergy-1400.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-cinergy.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-delock-61959.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-dib0700-nec.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-dib0700-rc5.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.ko
@@ -1039,6 +1073,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-reddo.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-snapstream-firefly.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-streamzap.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-su3000.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-tbs-nec.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-technisat-usb2.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.ko
@@ -1071,6 +1106,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/fc0012.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/fc0013.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/fc2580.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/m88ts2022.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/max2165.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/mc44s803.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/tuners/mt2060.ko
@@ -1154,6 +1190,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/em28xx/em28xx-alsa.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/em28xx/em28xx-dvb.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/em28xx/em28xx-rc.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/usb/em28xx/em28xx-v4l.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/em28xx/em28xx.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gl860
@@ -1193,6 +1230,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_sq905c.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_sq930x.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_stk014.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_stk1135.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_stv0680.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_sunplus.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/gspca/gspca_t613.ko
@@ -1216,8 +1254,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/s2255/s2255drv.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/siano
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/siano/smsusb.ko
-#lib/modules/KVER-ipfire/kernel/drivers/media/usb/sn9c102
-#lib/modules/KVER-ipfire/kernel/drivers/media/usb/sn9c102/sn9c102.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/stk1160
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/stk1160/stk1160.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/stkwebcam
@@ -1233,6 +1269,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/ttusb-dec
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/ttusb-dec/ttusb_dec.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/ttusb-dec/ttusbdecfe.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/usb/usbtv
+#lib/modules/KVER-ipfire/kernel/drivers/media/usb/usbtv/usbtv.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/usbvision
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/usbvision/usbvision.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/usb/uvc
@@ -1242,7 +1280,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/tuner.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/v4l2-common.ko
-#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/v4l2-int-device.ko
+#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/videobuf-core.ko
#lib/modules/KVER-ipfire/kernel/drivers/media/v4l2-core/videobuf-dma-contig.ko
@@ -1257,6 +1295,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/memstick
#lib/modules/KVER-ipfire/kernel/drivers/memstick/core
#lib/modules/KVER-ipfire/kernel/drivers/memstick/core/memstick.ko
+#lib/modules/KVER-ipfire/kernel/drivers/memstick/core/ms_block.ko
#lib/modules/KVER-ipfire/kernel/drivers/memstick/core/mspro_block.ko
#lib/modules/KVER-ipfire/kernel/drivers/memstick/host
#lib/modules/KVER-ipfire/kernel/drivers/memstick/host/jmb38x_ms.ko
@@ -1440,6 +1479,10 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/e1000/e1000.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/e1000e
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/i40e
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/i40e/i40e.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/i40evf
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/i40evf/i40evf.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/igb
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/igb/igb.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/intel/igbvf
@@ -1493,6 +1536,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/realtek/8139too.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/realtek/atp.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/realtek/r8169.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/renesas
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/renesas/sh_eth.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/sfc
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/sfc/sfc.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/silan
@@ -1504,6 +1549,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/smsc/epic100.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/smsc/smc9194.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/smsc/smc91c92_cs.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/smsc/smsc911x.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/smsc/smsc9420.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/stmicro
#lib/modules/KVER-ipfire/kernel/drivers/net/ethernet/stmicro/stmmac
@@ -1534,6 +1580,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/mdio.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/mii.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/netconsole.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/nlmon.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/phy
#lib/modules/KVER-ipfire/kernel/drivers/net/phy/amd.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/phy/at803x.ko
@@ -1580,6 +1627,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/dm9601.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/gl620a.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/hso.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/usb/huawei_cdc_ncm.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/int51x1.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/ipheth.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/kalmia.ko
@@ -1596,6 +1644,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/sierra_net.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/smsc75xx.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/smsc95xx.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/usb/sr9700.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/usb/sr9800.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/usbnet.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/usb/zaurus.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/veth.ko
@@ -1612,6 +1662,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ar5523
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ar5523/ar5523.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath10k
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath5k
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath9k
@@ -1621,6 +1674,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/carl9170
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/wcn36xx
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/wcn36xx/wcn36xx.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/wil6210
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ath/wil6210/wil6210.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/atmel.ko
@@ -1633,8 +1688,13 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmfmac
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmsmac
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmutil
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/cw1200
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/cw1200/cw1200_core.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/cw1200/cw1200_wlan_sdio.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/hostap
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/hostap/hostap.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/hostap/hostap_cs.ko
@@ -1689,6 +1749,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
@@ -1717,6 +1778,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtl8723ae
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtl8723ae/rtl8723ae.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
+#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtl_usb.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ti
#lib/modules/KVER-ipfire/kernel/drivers/net/wireless/ti/wl1251
@@ -1762,7 +1825,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/asus-laptop.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/asus-nb-wmi.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/asus-wmi.ko
-#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/chromeos_laptop.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/classmate-laptop.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/compal-laptop.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/dell-laptop.ko
@@ -1775,6 +1837,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/hp-wmi.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/hp_accel.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/ideapad-laptop.ko
+#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/intel-rst.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/intel_ips.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/intel_oaktrail.ko
#lib/modules/KVER-ipfire/kernel/drivers/platform/x86/msi-laptop.ko
@@ -1814,12 +1877,15 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-fm3130.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-hid-sensor-time.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-isl12022.ko
+#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-isl12057.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-isl1208.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-m41t80.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-m48t35.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-m48t59.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-max6900.ko
+#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-moxart.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-msm6242.ko
+#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-pcf2127.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-pcf8523.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-pcf8563.ko
#lib/modules/KVER-ipfire/kernel/drivers/rtc/rtc-pcf8583.ko
@@ -1880,6 +1946,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/scsi/dpt_i2o.ko
#lib/modules/KVER-ipfire/kernel/drivers/scsi/dtc.ko
#lib/modules/KVER-ipfire/kernel/drivers/scsi/eata.ko
+#lib/modules/KVER-ipfire/kernel/drivers/scsi/esas2r
+#lib/modules/KVER-ipfire/kernel/drivers/scsi/esas2r/esas2r.ko
#lib/modules/KVER-ipfire/kernel/drivers/scsi/fcoe
#lib/modules/KVER-ipfire/kernel/drivers/scsi/fcoe/fcoe.ko
#lib/modules/KVER-ipfire/kernel/drivers/scsi/fcoe/libfcoe.ko
@@ -1976,6 +2044,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/staging/echo/echo.ko
#lib/modules/KVER-ipfire/kernel/drivers/staging/et131x
#lib/modules/KVER-ipfire/kernel/drivers/staging/et131x/et131x.ko
+#lib/modules/KVER-ipfire/kernel/drivers/staging/gdm724x
+#lib/modules/KVER-ipfire/kernel/drivers/staging/gdm724x/gdmtty.ko
+#lib/modules/KVER-ipfire/kernel/drivers/staging/gdm724x/gdmulte.ko
#lib/modules/KVER-ipfire/kernel/drivers/staging/rts5139
#lib/modules/KVER-ipfire/kernel/drivers/staging/rts5139/rts5139.ko
#lib/modules/KVER-ipfire/kernel/drivers/staging/slicoss
@@ -1985,7 +2056,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/staging/usbip/usbip-host.ko
#lib/modules/KVER-ipfire/kernel/drivers/staging/usbip/vhci-hcd.ko
#lib/modules/KVER-ipfire/kernel/drivers/thermal
+#lib/modules/KVER-ipfire/kernel/drivers/thermal/int3403_thermal.ko
#lib/modules/KVER-ipfire/kernel/drivers/thermal/intel_powerclamp.ko
+#lib/modules/KVER-ipfire/kernel/drivers/thermal/x86_pkg_temp_thermal.ko
#lib/modules/KVER-ipfire/kernel/drivers/tty
#lib/modules/KVER-ipfire/kernel/drivers/tty/cyclades.ko
#lib/modules/KVER-ipfire/kernel/drivers/tty/n_gsm.ko
@@ -1997,6 +2070,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/8250
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/8250/8250_dw.ko
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/arc_uart.ko
+#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/fsl_lpuart.ko
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/jsm
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/jsm/jsm.ko
#lib/modules/KVER-ipfire/kernel/drivers/tty/serial/rp2.ko
@@ -2017,20 +2091,20 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/usb/atm/usbatm.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/atm/xusbatm.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea
-#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea/ci13xxx_msm.ko
-#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea/ci13xxx_pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea/ci_hdrc.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea/ci_hdrc_msm.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/chipidea/ci_hdrc_pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/class
#lib/modules/KVER-ipfire/kernel/drivers/usb/class/cdc-acm.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/class/cdc-wdm.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/class/usblp.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/class/usbtmc.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3
-#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3/dwc3-exynos.ko
-#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3/dwc3-omap.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3/dwc3-keystone.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3/dwc3-pci.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/dwc3/dwc3.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/host
+#lib/modules/KVER-ipfire/kernel/drivers/usb/host/bcma-hcd.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/host/hwa-hc.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/host/isp1362-hcd.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/host/sl811-hcd.ko
@@ -2042,6 +2116,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/usb/image/microtek.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/adutux.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/ehset.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/emi26.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/emi62.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/ezusb.ko
@@ -2057,6 +2132,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/usb/misc/yurex.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/mon
#lib/modules/KVER-ipfire/kernel/drivers/usb/mon/usbmon.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/phy
+#lib/modules/KVER-ipfire/kernel/drivers/usb/phy/phy-fsm-usb.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/aircable.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/ark3116.ko
@@ -2067,7 +2144,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/digi_acceleport.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/f81232.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/ftdi_sio.ko
-#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/funsoft.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/io_edgeport.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/io_ti.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/ipaq.ko
@@ -2079,17 +2155,17 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/mct_u232.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/mos7720.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/mos7840.ko
-#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/moto_modem.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/mxuport.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/option.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/oti6858.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/pl2303.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/qcaux.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/qcserial.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/quatech2.ko
-#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/siemens_mpi.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/sierra.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/spcp8x5.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/ssu100.ko
+#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/usb-serial-simple.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/usb_wwan.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/usbserial.ko
#lib/modules/KVER-ipfire/kernel/drivers/usb/serial/visor.ko
@@ -2124,6 +2200,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/uwb/whc-rc.ko
#lib/modules/KVER-ipfire/kernel/drivers/uwb/whci.ko
#lib/modules/KVER-ipfire/kernel/drivers/vhost
+#lib/modules/KVER-ipfire/kernel/drivers/vhost/vhost.ko
#lib/modules/KVER-ipfire/kernel/drivers/vhost/vhost_net.ko
#lib/modules/KVER-ipfire/kernel/drivers/vhost/vringh.ko
#lib/modules/KVER-ipfire/kernel/drivers/video
@@ -2157,6 +2234,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/video/matrox/matroxfb_base.ko
#lib/modules/KVER-ipfire/kernel/drivers/video/matrox/matroxfb_misc.ko
#lib/modules/KVER-ipfire/kernel/drivers/video/neofb.ko
+#lib/modules/KVER-ipfire/kernel/drivers/video/ocfb.ko
#lib/modules/KVER-ipfire/kernel/drivers/video/output.ko
#lib/modules/KVER-ipfire/kernel/drivers/video/pm2fb.ko
#lib/modules/KVER-ipfire/kernel/drivers/video/pm3fb.ko
@@ -2209,6 +2287,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/alim1535_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/alim7101_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/cpu5wdt.ko
+#lib/modules/KVER-ipfire/kernel/drivers/watchdog/dw_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/eurotechwdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/f71808e_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/geodewdt.ko
@@ -2222,6 +2301,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/it8712f_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/it87_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/machzwd.ko
+#lib/modules/KVER-ipfire/kernel/drivers/watchdog/mena21_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/nv_tco.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/pc87413_wdt.ko
#lib/modules/KVER-ipfire/kernel/drivers/watchdog/pcwd_pci.ko
@@ -2353,6 +2433,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/lib/crc7.ko
#lib/modules/KVER-ipfire/kernel/lib/crc8.ko
#lib/modules/KVER-ipfire/kernel/lib/libcrc32c.ko
+#lib/modules/KVER-ipfire/kernel/lib/lz4
+#lib/modules/KVER-ipfire/kernel/lib/lz4/lz4_compress.ko
+#lib/modules/KVER-ipfire/kernel/lib/lz4/lz4hc_compress.ko
#lib/modules/KVER-ipfire/kernel/lib/mpi
#lib/modules/KVER-ipfire/kernel/lib/mpi/mpi.ko
#lib/modules/KVER-ipfire/kernel/lib/oid_registry.ko
@@ -2362,8 +2445,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/lib/ts_bm.ko
#lib/modules/KVER-ipfire/kernel/lib/ts_fsm.ko
#lib/modules/KVER-ipfire/kernel/lib/ts_kmp.ko
-#lib/modules/KVER-ipfire/kernel/lib/zlib_deflate
-#lib/modules/KVER-ipfire/kernel/lib/zlib_deflate/zlib_deflate.ko
#lib/modules/KVER-ipfire/kernel/net
#lib/modules/KVER-ipfire/kernel/net/802
#lib/modules/KVER-ipfire/kernel/net/802/garp.ko
@@ -2409,8 +2490,13 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/bridge/netfilter/ebtable_filter.ko
#lib/modules/KVER-ipfire/kernel/net/bridge/netfilter/ebtable_nat.ko
#lib/modules/KVER-ipfire/kernel/net/bridge/netfilter/ebtables.ko
+#lib/modules/KVER-ipfire/kernel/net/bridge/netfilter/nf_tables_bridge.ko
#lib/modules/KVER-ipfire/kernel/net/core
#lib/modules/KVER-ipfire/kernel/net/core/netprio_cgroup.ko
+#lib/modules/KVER-ipfire/kernel/net/hsr
+#lib/modules/KVER-ipfire/kernel/net/hsr/hsr.ko
+#lib/modules/KVER-ipfire/kernel/net/ieee802154
+#lib/modules/KVER-ipfire/kernel/net/ieee802154/6lowpan_iphc.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4
#lib/modules/KVER-ipfire/kernel/net/ipv4/ah4.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/esp4.ko
@@ -2429,6 +2515,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_ECN.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_REJECT.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_SYNPROXY.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_ah.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_ipp2p.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/ipt_rpfilter.ko
@@ -2442,6 +2529,11 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nf_nat_pptp.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nf_nat_snmp_basic.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nf_tables_arp.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nf_tables_ipv4.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nft_chain_nat_ipv4.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nft_chain_route_ipv4.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv4/netfilter/nft_reject_ipv4.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/tcp_bic.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/tcp_diag.ko
#lib/modules/KVER-ipfire/kernel/net/ipv4/tcp_highspeed.ko
@@ -2465,12 +2557,14 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/ipv6/esp6.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/ip6_gre.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/ip6_tunnel.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/ip6_vti.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/ipcomp6.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/mip6.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_MASQUERADE.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_NPT.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_SYNPROXY.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_ah.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_eui64.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6t_frag.ko
@@ -2485,6 +2579,10 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6table_raw.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/ip6table_security.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/nf_nat_ipv6.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/nf_tables_ipv6.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/nft_chain_nat_ipv6.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/nft_chain_route_ipv6.ko
+#lib/modules/KVER-ipfire/kernel/net/ipv6/netfilter/nft_reject_ipv6.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/sit.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/tunnel6.ko
#lib/modules/KVER-ipfire/kernel/net/ipv6/xfrm6_mode_beet.ko
@@ -2515,7 +2613,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_ipportnet.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_net.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_netiface.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_netnet.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_netport.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_hash_netportnet.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipset/ip_set_list_set.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipvs
#lib/modules/KVER-ipfire/kernel/net/netfilter/ipvs/ip_vs.ko
@@ -2556,13 +2656,28 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_nat_proto_udplite.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_nat_sip.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_nat_tftp.ko
-#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_tproxy_core.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_synproxy_core.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_tables.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nf_tables_inet.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink_acct.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink_cthelper.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink_cttimeout.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink_log.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/nfnetlink_queue.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_compat.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_counter.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_ct.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_exthdr.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_hash.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_limit.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_log.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_meta.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_nat.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_queue.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_rbtree.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_reject.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/nft_reject_inet.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_AUDIT.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_CHECKSUM.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_CLASSIFY.ko
@@ -2588,6 +2703,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_TRACE.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_addrtype.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_bpf.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_cgroup.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_cluster.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_comment.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_connbytes.ko
@@ -2604,7 +2720,9 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_hashlimit.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_helper.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_hl.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_ipcomp.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_iprange.ko
+#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_l2tp.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_layer7.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_length.ko
#lib/modules/KVER-ipfire/kernel/net/netfilter/xt_limit.ko
@@ -2649,6 +2767,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/sched/act_simple.ko
#lib/modules/KVER-ipfire/kernel/net/sched/act_skbedit.ko
#lib/modules/KVER-ipfire/kernel/net/sched/cls_basic.ko
+#lib/modules/KVER-ipfire/kernel/net/sched/cls_bpf.ko
#lib/modules/KVER-ipfire/kernel/net/sched/cls_cgroup.ko
#lib/modules/KVER-ipfire/kernel/net/sched/cls_flow.ko
#lib/modules/KVER-ipfire/kernel/net/sched/cls_fw.ko
@@ -2669,9 +2788,11 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/net/sched/sch_codel.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_drr.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_dsmark.ko
+#lib/modules/KVER-ipfire/kernel/net/sched/sch_fq.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_fq_codel.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_gred.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_hfsc.ko
+#lib/modules/KVER-ipfire/kernel/net/sched/sch_hhf.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_htb.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_ingress.ko
#lib/modules/KVER-ipfire/kernel/net/sched/sch_mqprio.ko
@@ -2724,7 +2845,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/sound/core/seq/snd-seq.ko
#lib/modules/KVER-ipfire/kernel/sound/core/snd-hrtimer.ko
#lib/modules/KVER-ipfire/kernel/sound/core/snd-hwdep.ko
-#lib/modules/KVER-ipfire/kernel/sound/core/snd-page-alloc.ko
#lib/modules/KVER-ipfire/kernel/sound/core/snd-pcm.ko
#lib/modules/KVER-ipfire/kernel/sound/core/snd-rawmidi.ko
#lib/modules/KVER-ipfire/kernel/sound/core/snd-timer.ko
@@ -2751,6 +2871,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/sound/drivers/vx
#lib/modules/KVER-ipfire/kernel/sound/drivers/vx/snd-vx-lib.ko
#lib/modules/KVER-ipfire/kernel/sound/firewire
+#lib/modules/KVER-ipfire/kernel/sound/firewire/snd-dice.ko
#lib/modules/KVER-ipfire/kernel/sound/firewire/snd-firewire-lib.ko
#lib/modules/KVER-ipfire/kernel/sound/firewire/snd-firewire-speakers.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c
@@ -2759,7 +2880,6 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/sound/i2c/other/snd-ak4114.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c/other/snd-ak4xxx-adda.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c/other/snd-pt2258.ko
-#lib/modules/KVER-ipfire/kernel/sound/i2c/other/snd-tea575x-tuner.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c/snd-cs8427.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c/snd-i2c.ko
#lib/modules/KVER-ipfire/kernel/sound/i2c/snd-tea6330t.ko
@@ -2861,6 +2981,7 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-conexant.ko
+#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-generic.ko
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-idt.ko
#lib/modules/KVER-ipfire/kernel/sound/pci/hda/snd-hda-codec-realtek.ko
@@ -2933,6 +3054,8 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/kernel/sound/usb/6fire/snd-usb-6fire.ko
#lib/modules/KVER-ipfire/kernel/sound/usb/caiaq
#lib/modules/KVER-ipfire/kernel/sound/usb/caiaq/snd-usb-caiaq.ko
+#lib/modules/KVER-ipfire/kernel/sound/usb/hiface
+#lib/modules/KVER-ipfire/kernel/sound/usb/hiface/snd-usb-hiface.ko
#lib/modules/KVER-ipfire/kernel/sound/usb/misc
#lib/modules/KVER-ipfire/kernel/sound/usb/misc/snd-ua101.ko
#lib/modules/KVER-ipfire/kernel/sound/usb/snd-usb-audio.ko
@@ -2953,4 +3076,3 @@ lib/modules/KVER-ipfire
#lib/modules/KVER-ipfire/modules.symbols.bin
#lib/modules/KVER-ipfire/source
sbin/gen_init_cpio
-boot/initramfs-KVER-ipfire.img
diff --git a/config/rootfiles/common/i586/linux-headers b/config/rootfiles/common/i586/linux-headers
index deaa97f..804a610 100644
--- a/config/rootfiles/common/i586/linux-headers
+++ b/config/rootfiles/common/i586/linux-headers
@@ -105,6 +105,7 @@
#usr/include/drm/i810_drm.h
#usr/include/drm/i915_drm.h
#usr/include/drm/mga_drm.h
+#usr/include/drm/msm_drm.h
#usr/include/drm/nouveau_drm.h
#usr/include/drm/qxl_drm.h
#usr/include/drm/r128_drm.h
@@ -150,6 +151,7 @@
#usr/include/linux/ax25.h
#usr/include/linux/b1lli.h
#usr/include/linux/baycom.h
+#usr/include/linux/bcm933xx_hcs.h
#usr/include/linux/bfs_fs.h
#usr/include/linux/binfmts.h
#usr/include/linux/blkpg.h
@@ -332,6 +334,7 @@
#usr/include/linux/kvm.h
#usr/include/linux/kvm_para.h
#usr/include/linux/l2tp.h
+#usr/include/linux/libc-compat.h
#usr/include/linux/limits.h
#usr/include/linux/llc.h
#usr/include/linux/loop.h
@@ -345,6 +348,8 @@
#usr/include/linux/mei.h
#usr/include/linux/mempolicy.h
#usr/include/linux/meye.h
+#usr/include/linux/mic_common.h
+#usr/include/linux/mic_ioctl.h
#usr/include/linux/mii.h
#usr/include/linux/minix_fs.h
#usr/include/linux/mman.h
@@ -382,6 +387,8 @@
#usr/include/linux/netfilter/nf_conntrack_tcp.h
#usr/include/linux/netfilter/nf_conntrack_tuple_common.h
#usr/include/linux/netfilter/nf_nat.h
+#usr/include/linux/netfilter/nf_tables.h
+#usr/include/linux/netfilter/nf_tables_compat.h
#usr/include/linux/netfilter/nfnetlink.h
#usr/include/linux/netfilter/nfnetlink_acct.h
#usr/include/linux/netfilter/nfnetlink_compat.h
@@ -398,6 +405,7 @@
#usr/include/linux/netfilter/xt_CONNSECMARK.h
#usr/include/linux/netfilter/xt_CT.h
#usr/include/linux/netfilter/xt_DSCP.h
+#usr/include/linux/netfilter/xt_HMARK.h
#usr/include/linux/netfilter/xt_IDLETIMER.h
#usr/include/linux/netfilter/xt_LED.h
#usr/include/linux/netfilter/xt_LOG.h
@@ -412,6 +420,7 @@
#usr/include/linux/netfilter/xt_TPROXY.h
#usr/include/linux/netfilter/xt_addrtype.h
#usr/include/linux/netfilter/xt_bpf.h
+#usr/include/linux/netfilter/xt_cgroup.h
#usr/include/linux/netfilter/xt_cluster.h
#usr/include/linux/netfilter/xt_comment.h
#usr/include/linux/netfilter/xt_connbytes.h
@@ -427,8 +436,10 @@
#usr/include/linux/netfilter/xt_esp.h
#usr/include/linux/netfilter/xt_hashlimit.h
#usr/include/linux/netfilter/xt_helper.h
+#usr/include/linux/netfilter/xt_ipcomp.h
#usr/include/linux/netfilter/xt_iprange.h
#usr/include/linux/netfilter/xt_ipvs.h
+#usr/include/linux/netfilter/xt_l2tp.h
#usr/include/linux/netfilter/xt_layer7.h
#usr/include/linux/netfilter/xt_length.h
#usr/include/linux/netfilter/xt_limit.h
@@ -445,6 +456,7 @@
#usr/include/linux/netfilter/xt_rateest.h
#usr/include/linux/netfilter/xt_realm.h
#usr/include/linux/netfilter/xt_recent.h
+#usr/include/linux/netfilter/xt_rpfilter.h
#usr/include/linux/netfilter/xt_sctp.h
#usr/include/linux/netfilter/xt_set.h
#usr/include/linux/netfilter/xt_socket.h
@@ -527,6 +539,7 @@
#usr/include/linux/nfsd/stats.h
#usr/include/linux/nl80211.h
#usr/include/linux/nubus.h
+#usr/include/linux/nvme.h
#usr/include/linux/nvram.h
#usr/include/linux/omap3isp.h
#usr/include/linux/omapfb.h
@@ -618,6 +631,7 @@
#usr/include/linux/taskstats.h
#usr/include/linux/tc_act
#usr/include/linux/tc_act/tc_csum.h
+#usr/include/linux/tc_act/tc_defact.h
#usr/include/linux/tc_act/tc_gact.h
#usr/include/linux/tc_act/tc_ipt.h
#usr/include/linux/tc_act/tc_mirred.h
@@ -700,6 +714,8 @@
#usr/include/linux/x25.h
#usr/include/linux/xattr.h
#usr/include/linux/xfrm.h
+#usr/include/linux/zorro.h
+#usr/include/linux/zorro_ids.h
#usr/include/mtd
#usr/include/mtd/inftl-user.h
#usr/include/mtd/mtd-abi.h
@@ -729,6 +745,7 @@
#usr/include/sound/compress_offload.h
#usr/include/sound/compress_params.h
#usr/include/sound/emu10k1.h
+#usr/include/sound/firewire.h
#usr/include/sound/hdsp.h
#usr/include/sound/hdspm.h
#usr/include/sound/sb16_csp.h
@@ -740,4 +757,6 @@
#usr/include/video/uvesafb.h
#usr/include/xen
#usr/include/xen/evtchn.h
+#usr/include/xen/gntalloc.h
+#usr/include/xen/gntdev.h
#usr/include/xen/privcmd.h
diff --git a/config/rootfiles/common/i586/linux-initrd b/config/rootfiles/common/i586/linux-initrd
new file mode 100644
index 0000000..5679550
--- /dev/null
+++ b/config/rootfiles/common/i586/linux-initrd
@@ -0,0 +1 @@
+#boot/initramfs-KVER-ipfire.img
diff --git a/config/rootfiles/common/i586/linux-initrd-pae b/config/rootfiles/common/i586/linux-initrd-pae
new file mode 100644
index 0000000..083efc2
--- /dev/null
+++ b/config/rootfiles/common/i586/linux-initrd-pae
@@ -0,0 +1 @@
+#boot/initramfs-KVER-ipfire-pae.img
diff --git a/config/rootfiles/packages/linux-pae b/config/rootfiles/packages/linux-pae
index 60e0403..19f458c 100644
--- a/config/rootfiles/packages/linux-pae
+++ b/config/rootfiles/packages/linux-pae
@@ -14,7 +14,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/crypto/serpent-sse2-i586.ko
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/crypto/twofish-i586.ko
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel
-#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel/microcode.ko
+#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel/cpu
+#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel/cpu/microcode
+#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel/cpu/microcode/microcode.ko
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kernel/test_nx.ko
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kvm
#lib/modules/KVER-ipfire-pae/kernel/arch/x86/kvm/kvm-amd.ko
@@ -57,6 +59,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/crypto/gcm.ko
#lib/modules/KVER-ipfire-pae/kernel/crypto/ghash-generic.ko
#lib/modules/KVER-ipfire-pae/kernel/crypto/khazad.ko
+#lib/modules/KVER-ipfire-pae/kernel/crypto/lz4.ko
+#lib/modules/KVER-ipfire-pae/kernel/crypto/lz4hc.ko
#lib/modules/KVER-ipfire-pae/kernel/crypto/lzo.ko
#lib/modules/KVER-ipfire-pae/kernel/crypto/md4.ko
#lib/modules/KVER-ipfire-pae/kernel/crypto/michael_mic.ko
@@ -83,7 +87,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/crypto/zlib.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers
#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi
-#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi/acpi_i2c.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi/acpi_extlog.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi/acpi_ipmi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi/acpi_pad.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/acpi/custom_method.ko
@@ -150,6 +154,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_nv.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_promise.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_qstor.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_rcar.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_sil.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_sil24.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/ata/sata_sis.ko
@@ -177,10 +182,11 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/base
#lib/modules/KVER-ipfire-pae/kernel/drivers/base/regmap
#lib/modules/KVER-ipfire-pae/kernel/drivers/base/regmap/regmap-i2c.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/bcma
+#lib/modules/KVER-ipfire-pae/kernel/drivers/bcma/bcma.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/block
#lib/modules/KVER-ipfire-pae/kernel/drivers/block/DAC960.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/block/cciss.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/block/cpqarray.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/block/cryptoloop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/block/floppy.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/block/mtip32xx
@@ -247,7 +253,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/gx-suspmod.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/longhaul.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/longrun.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/mperf.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/p4-clockmod.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/pcc-cpufreq.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/powernow-k6.ko
@@ -257,13 +262,19 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/speedstep-lib.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/cpufreq/speedstep-smi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto
+#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/ccp
+#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/ccp/ccp-crypto.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/ccp/ccp.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/geode-aes.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/padlock-aes.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/crypto/padlock-sha.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/dca
#lib/modules/KVER-ipfire-pae/kernel/drivers/dca/dca.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/dma
-#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/dw_dmac.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/dw
+#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/dw/dw_dmac.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/dw/dw_dmac_core.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/dw/dw_dmac_pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/ioat
#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/ioat/ioatdma.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/dma/pch_dma.ko
@@ -292,14 +303,18 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/firmware/edd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/firmware/iscsi_ibft.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio
+#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-f7188x.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-ich.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-sch.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-sch311x.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-ts5500.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpio/gpio-viperboard.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/ast
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/ast/ast.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/bochs
+#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/bochs/bochs-drm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/cirrus
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/cirrus/cirrus.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/gpu/drm/drm.ko
@@ -360,6 +375,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat-kovaplus.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat-lua.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat-pyra.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat-ryos.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat-savu.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-roccat.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hid/hid-saitek.ko
@@ -420,9 +436,11 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/fam15h_power.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/fschmd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/g760a.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/g762.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/gl518sm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/gl520sm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/hih6130.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/htu21.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/hwmon-vid.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/i5k_amb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/hwmon/ibmaem.ko
@@ -526,6 +544,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-parport.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-pca-platform.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-piix4.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-robotfuzz-osif.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-scmi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-simtec.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/i2c-sis5595.ko
@@ -538,7 +557,13 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/busses/scx200_acb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/i2c-core.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/i2c-dev.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/i2c-mux.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/i2c-smbus.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/muxes
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/muxes/i2c-mux-gpio.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/muxes/i2c-mux-pca9541.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/muxes/i2c-mux-pca954x.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/i2c/muxes/i2c-mux-pinctrl.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/iio
#lib/modules/KVER-ipfire-pae/kernel/drivers/iio/common
#lib/modules/KVER-ipfire-pae/kernel/drivers/iio/common/hid-sensors
@@ -558,6 +583,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/ati_remote2.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/atlas_btns.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/cm109.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/ideapad_slidebar.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/keyspan_remote.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/pcspkr.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/misc/powermate.ko
@@ -577,6 +603,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/serio
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/serio/altera_ps2.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/serio/arc_ps2.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/input/serio/hyperv-keyboard.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/serio/serio_raw.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/input/sparse-keymap.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/isdn
@@ -647,11 +674,13 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-lp5523.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-lp5562.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-lp55xx-common.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-lp8501.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-lt3593.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-ot200.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-pca9532.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-pca955x.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-pca9633.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-pca963x.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-pca9685.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-ss4200.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/leds-tca6507.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/leds/trigger
@@ -668,7 +697,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/bcache
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/bcache/bcache.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-bio-prison.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-bufio.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-cache-cleaner.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-cache-mq.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-cache.ko
@@ -679,6 +707,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-raid.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-round-robin.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-service-time.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-switch.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/dm-verity.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/faulty.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/md/linear.ko
@@ -719,6 +748,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cx24110.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cx24113.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cx24116.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cx24117.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cx24123.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/cxd2820r.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/dib0070.ko
@@ -733,6 +763,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/drxk.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/ds3000.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/dvb-pll.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/dvbsky_m88ds3103.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/ec100.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/isl6405.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/dvb-frontends/isl6421.ko
@@ -816,6 +847,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/mt9v011.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/ov7670.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/saa6588.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/saa6752hs.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/saa7110.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/saa7115.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/i2c/saa7127.ko
@@ -896,7 +928,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/pt1
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/pt1/earth-pt1.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/saa7134
-#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/saa7134/saa6752hs.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/saa7134/saa7134-alsa.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/saa7134/saa7134-dvb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/pci/saa7134/saa7134-empress.ko
@@ -927,12 +958,16 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/marvell-ccic/cafe_ccic.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/sh_veu.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/rcar_vin.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/sh_mobile_csi2.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/soc_camera.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/soc_camera_platform.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/soc_mediabus.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/soc_camera/soc_scale_crop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/timblogiw.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/vsp1
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/platform/vsp1/vsp1.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/ati_remote.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/ene_ir.ko
@@ -973,6 +1008,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-budget-ci-old.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-cinergy-1400.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-cinergy.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-delock-61959.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-dib0700-nec.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-dib0700-rc5.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.ko
@@ -1035,6 +1071,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-reddo.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-snapstream-firefly.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-streamzap.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-su3000.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-tbs-nec.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-technisat-usb2.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.ko
@@ -1067,6 +1104,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/fc0012.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/fc0013.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/fc2580.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/m88ts2022.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/max2165.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/mc44s803.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/tuners/mt2060.ko
@@ -1150,6 +1188,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/em28xx/em28xx-alsa.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/em28xx/em28xx-dvb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/em28xx/em28xx-rc.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/em28xx/em28xx-v4l.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/em28xx/em28xx.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gl860
@@ -1189,6 +1228,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_sq905c.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_sq930x.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_stk014.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_stk1135.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_stv0680.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_sunplus.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/gspca/gspca_t613.ko
@@ -1212,8 +1252,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/s2255/s2255drv.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/siano
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/siano/smsusb.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/sn9c102
-#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/sn9c102/sn9c102.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/stk1160
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/stk1160/stk1160.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/stkwebcam
@@ -1229,6 +1267,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/ttusb-dec
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/ttusb-dec/ttusb_dec.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/ttusb-dec/ttusbdecfe.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/usbtv
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/usbtv/usbtv.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/usbvision
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/usbvision/usbvision.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/usb/uvc
@@ -1238,7 +1278,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/tuner.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/v4l2-common.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/v4l2-int-device.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/v4l2-dv-timings.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/v4l2-mem2mem.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/videobuf-core.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/media/v4l2-core/videobuf-dma-contig.ko
@@ -1253,6 +1293,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/core
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/core/memstick.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/core/ms_block.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/core/mspro_block.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/host
#lib/modules/KVER-ipfire-pae/kernel/drivers/memstick/host/jmb38x_ms.ko
@@ -1436,6 +1477,10 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/e1000/e1000.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/e1000e
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/i40e
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/i40e/i40e.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/i40evf
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/i40evf/i40evf.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/igb
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/igb/igb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/intel/igbvf
@@ -1489,6 +1534,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/realtek/8139too.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/realtek/atp.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/realtek/r8169.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/renesas
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/renesas/sh_eth.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/sfc
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/sfc/sfc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/silan
@@ -1500,6 +1547,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/smsc/epic100.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/smsc/smc9194.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/smsc/smc91c92_cs.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/smsc/smsc911x.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/smsc/smsc9420.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/stmicro
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/ethernet/stmicro/stmmac
@@ -1530,6 +1578,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/mdio.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/mii.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/netconsole.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/nlmon.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/phy
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/phy/amd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/phy/at803x.ko
@@ -1576,6 +1625,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/dm9601.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/gl620a.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/hso.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/huawei_cdc_ncm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/int51x1.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/ipheth.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/kalmia.ko
@@ -1592,6 +1642,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/sierra_net.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/smsc75xx.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/smsc95xx.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/sr9700.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/sr9800.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/usbnet.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/usb/zaurus.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/veth.ko
@@ -1608,6 +1660,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ar5523
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ar5523/ar5523.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath10k
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath5k
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath9k
@@ -1617,6 +1672,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/carl9170
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/wcn36xx
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/wcn36xx/wcn36xx.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/wil6210
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ath/wil6210/wil6210.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/atmel.ko
@@ -1629,8 +1686,13 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmfmac
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmsmac
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmutil
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/cw1200
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/cw1200/cw1200_core.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/cw1200/cw1200_wlan_sdio.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/hostap
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/hostap/hostap.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/hostap/hostap_cs.ko
@@ -1685,6 +1747,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
@@ -1713,6 +1776,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtl8192se/rtl8192se.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtl8723ae
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtl8723ae/rtl8723ae.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtl_usb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ti
#lib/modules/KVER-ipfire-pae/kernel/drivers/net/wireless/ti/wl1251
@@ -1762,7 +1827,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/asus-laptop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/asus-nb-wmi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/asus-wmi.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/chromeos_laptop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/classmate-laptop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/compal-laptop.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/dell-laptop.ko
@@ -1775,6 +1839,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/hp-wmi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/hp_accel.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/ideapad-laptop.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/intel-rst.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/intel_ips.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/intel_oaktrail.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/platform/x86/msi-laptop.ko
@@ -1814,12 +1879,15 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-fm3130.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-hid-sensor-time.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-isl12022.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-isl12057.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-isl1208.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-m41t80.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-m48t35.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-m48t59.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-max6900.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-moxart.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-msm6242.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-pcf2127.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-pcf8523.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-pcf8563.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/rtc/rtc-pcf8583.ko
@@ -1880,6 +1948,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/dpt_i2o.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/dtc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/eata.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/esas2r
+#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/esas2r/esas2r.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/fcoe
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/fcoe/fcoe.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/scsi/fcoe/libfcoe.ko
@@ -1976,6 +2046,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/echo/echo.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/et131x
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/et131x/et131x.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/gdm724x
+#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/gdm724x/gdmtty.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/gdm724x/gdmulte.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/rts5139
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/rts5139/rts5139.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/slicoss
@@ -1985,7 +2058,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/usbip/usbip-host.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/staging/usbip/vhci-hcd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/thermal
+#lib/modules/KVER-ipfire-pae/kernel/drivers/thermal/int3403_thermal.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/thermal/intel_powerclamp.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/thermal/x86_pkg_temp_thermal.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/cyclades.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/n_gsm.ko
@@ -1997,6 +2072,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/8250
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/8250/8250_dw.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/arc_uart.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/fsl_lpuart.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/jsm
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/jsm/jsm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/tty/serial/rp2.ko
@@ -2017,22 +2093,23 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/atm/usbatm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/atm/xusbatm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea/ci13xxx_msm.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea/ci13xxx_pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea/ci_hdrc.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea/ci_hdrc_msm.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/chipidea/ci_hdrc_pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/class
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/class/cdc-acm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/class/cdc-wdm.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/class/usblp.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/class/usbtmc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3/dwc3-exynos.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3/dwc3-omap.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3/dwc3-keystone.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3/dwc3-pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/dwc3/dwc3.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/bcma-hcd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/hwa-hc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/isp1362-hcd.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/ohci-pci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/sl811-hcd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/ssb-hcd.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/host/whci
@@ -2042,6 +2119,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/image/microtek.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/adutux.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/ehset.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/emi26.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/emi62.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/ezusb.ko
@@ -2057,6 +2135,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/misc/yurex.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/mon
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/mon/usbmon.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/phy
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/phy/phy-fsm-usb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/aircable.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/ark3116.ko
@@ -2067,7 +2147,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/digi_acceleport.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/f81232.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/ftdi_sio.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/funsoft.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/io_edgeport.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/io_ti.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/ipaq.ko
@@ -2079,17 +2158,17 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/mct_u232.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/mos7720.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/mos7840.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/moto_modem.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/mxuport.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/option.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/oti6858.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/pl2303.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/qcaux.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/qcserial.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/quatech2.ko
-#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/siemens_mpi.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/sierra.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/spcp8x5.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/ssu100.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/usb-serial-simple.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/usb_wwan.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/usbserial.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/usb/serial/visor.ko
@@ -2124,6 +2203,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/uwb/whc-rc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/uwb/whci.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/vhost
+#lib/modules/KVER-ipfire-pae/kernel/drivers/vhost/vhost.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/vhost/vhost_net.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/vhost/vringh.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video
@@ -2157,6 +2237,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/matrox/matroxfb_base.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/matrox/matroxfb_misc.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/neofb.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/video/ocfb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/output.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/pm2fb.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/video/pm3fb.ko
@@ -2210,6 +2291,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/alim1535_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/alim7101_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/cpu5wdt.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/dw_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/eurotechwdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/f71808e_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/geodewdt.ko
@@ -2223,6 +2305,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/it8712f_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/it87_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/machzwd.ko
+#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/mena21_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/nv_tco.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/pc87413_wdt.ko
#lib/modules/KVER-ipfire-pae/kernel/drivers/watchdog/pcwd_pci.ko
@@ -2365,6 +2448,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/lib/crc7.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/crc8.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/libcrc32c.ko
+#lib/modules/KVER-ipfire-pae/kernel/lib/lz4
+#lib/modules/KVER-ipfire-pae/kernel/lib/lz4/lz4_compress.ko
+#lib/modules/KVER-ipfire-pae/kernel/lib/lz4/lz4hc_compress.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/mpi
#lib/modules/KVER-ipfire-pae/kernel/lib/mpi/mpi.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/oid_registry.ko
@@ -2374,8 +2460,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/lib/ts_bm.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/ts_fsm.ko
#lib/modules/KVER-ipfire-pae/kernel/lib/ts_kmp.ko
-#lib/modules/KVER-ipfire-pae/kernel/lib/zlib_deflate
-#lib/modules/KVER-ipfire-pae/kernel/lib/zlib_deflate/zlib_deflate.ko
#lib/modules/KVER-ipfire-pae/kernel/net
#lib/modules/KVER-ipfire-pae/kernel/net/802
#lib/modules/KVER-ipfire-pae/kernel/net/802/garp.ko
@@ -2421,8 +2505,13 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/bridge/netfilter/ebtable_filter.ko
#lib/modules/KVER-ipfire-pae/kernel/net/bridge/netfilter/ebtable_nat.ko
#lib/modules/KVER-ipfire-pae/kernel/net/bridge/netfilter/ebtables.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/bridge/netfilter/nf_tables_bridge.ko
#lib/modules/KVER-ipfire-pae/kernel/net/core
#lib/modules/KVER-ipfire-pae/kernel/net/core/netprio_cgroup.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/hsr
+#lib/modules/KVER-ipfire-pae/kernel/net/hsr/hsr.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ieee802154
+#lib/modules/KVER-ipfire-pae/kernel/net/ieee802154/6lowpan_iphc.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/ah4.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/esp4.ko
@@ -2441,6 +2530,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_ECN.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_REJECT.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_SYNPROXY.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_ah.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_ipp2p.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/ipt_rpfilter.ko
@@ -2454,6 +2544,11 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nf_nat_pptp.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nf_nat_snmp_basic.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nf_tables_arp.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nf_tables_ipv4.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nft_chain_nat_ipv4.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nft_chain_route_ipv4.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/netfilter/nft_reject_ipv4.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/tcp_bic.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/tcp_diag.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv4/tcp_highspeed.ko
@@ -2477,12 +2572,14 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/esp6.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/ip6_gre.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/ip6_tunnel.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/ip6_vti.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/ipcomp6.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/mip6.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_MASQUERADE.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_NPT.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_REJECT.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_SYNPROXY.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_ah.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_eui64.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6t_frag.ko
@@ -2497,6 +2594,10 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6table_raw.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/ip6table_security.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/nf_nat_ipv6.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/nf_tables_ipv6.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/nft_chain_nat_ipv6.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/nft_chain_route_ipv6.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/netfilter/nft_reject_ipv6.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/sit.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/tunnel6.ko
#lib/modules/KVER-ipfire-pae/kernel/net/ipv6/xfrm6_mode_beet.ko
@@ -2527,7 +2628,9 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_ipportnet.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_net.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_netiface.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_netnet.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_netport.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_hash_netportnet.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipset/ip_set_list_set.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipvs
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/ipvs/ip_vs.ko
@@ -2568,13 +2671,26 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_nat_proto_udplite.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_nat_sip.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_nat_tftp.ko
-#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_tproxy_core.ko
-#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_synproxy_core.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nf_tables_inet.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink_acct.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink_cthelper.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink_cttimeout.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink_log.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nfnetlink_queue.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_compat.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_counter.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_ct.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_exthdr.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_hash.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_limit.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_log.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_meta.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_nat.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_queue.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_rbtree.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_reject.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/nft_reject_inet.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_AUDIT.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_CHECKSUM.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_CLASSIFY.ko
@@ -2600,6 +2716,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_TRACE.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_addrtype.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_bpf.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_cgroup.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_cluster.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_comment.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_connbytes.ko
@@ -2616,7 +2733,10 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_hashlimit.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_helper.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_hl.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_ipcomp.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_iprange.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_ipvs.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_l2tp.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_layer7.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_length.ko
#lib/modules/KVER-ipfire-pae/kernel/net/netfilter/xt_limit.ko
@@ -2661,6 +2781,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/sched/act_simple.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/act_skbedit.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/cls_basic.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/sched/cls_bpf.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/cls_cgroup.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/cls_flow.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/cls_fw.ko
@@ -2681,9 +2802,11 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_codel.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_drr.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_dsmark.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_fq.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_fq_codel.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_gred.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_hfsc.ko
+#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_hhf.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_htb.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_ingress.ko
#lib/modules/KVER-ipfire-pae/kernel/net/sched/sch_mqprio.ko
@@ -2736,7 +2859,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/sound/core/seq/snd-seq.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-hrtimer.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-hwdep.ko
-#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-page-alloc.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-pcm.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-rawmidi.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/core/snd-timer.ko
@@ -2771,7 +2893,6 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/other/snd-ak4114.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/other/snd-pt2258.ko
-#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/snd-cs8427.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/snd-i2c.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/i2c/snd-tea6330t.ko
@@ -2873,6 +2994,7 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko
+#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-generic.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko
@@ -2945,6 +3067,8 @@ lib/modules/KVER-ipfire-pae
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/caiaq
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko
+#lib/modules/KVER-ipfire-pae/kernel/sound/usb/hiface
+#lib/modules/KVER-ipfire-pae/kernel/sound/usb/hiface/snd-usb-hiface.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/misc
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/misc/snd-ua101.ko
#lib/modules/KVER-ipfire-pae/kernel/sound/usb/snd-usb-audio.ko
diff --git a/lfs/cryptodev b/lfs/cryptodev
index 14e463e..00e83e7 100644
--- a/lfs/cryptodev
+++ b/lfs/cryptodev
@@ -30,7 +30,7 @@ endif
VERSUFIX=ipfire$(KCFG)
-VER = 1.4
+VER = 6aa62a2c320b04f55fdfe0ed015c3d9b48997239
THISAPP = cryptodev-linux-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 7b0ac1c0a88d8fbe7316db02f21666e6
+$(DL_FILE)_MD5 = ddf7876487c876f6676ef0e050e9d204
install : $(TARGET)
diff --git a/lfs/e1000e b/lfs/e1000e
index 10a42ee..d23369c 100644
--- a/lfs/e1000e
+++ b/lfs/e1000e
@@ -25,9 +25,9 @@
include Config
VERSUFIX = ipfire$(KCFG)
-MODPATH = /lib/modules/$(KVER)-$(VERSUFIX)/kernel/drivers/net/e1000e
+MODPATH = /lib/modules/$(KVER)-$(VERSUFIX)/kernel/drivers/net/ethernet/intel/e1000e
-VER = 3.0.4
+VER = 3.1.0.2
THISAPP = e1000e-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -43,7 +43,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 2d8364cd2043ef5c71291a4ca8b8084e
+$(DL_FILE)_MD5 = b8d770160691edd247a90070f45642ce
install : $(TARGET)
diff --git a/lfs/flash-images b/lfs/flash-images
index aeaace2..f660d5c 100644
--- a/lfs/flash-images
+++ b/lfs/flash-images
@@ -127,8 +127,11 @@ ifeq "$(MACHINE_TYPE)" "arm"
endif
# Install IPFire
+ifneq "$(MACHINE_TYPE)" "arm"
tar -x --lzma -C $(MNThdd)/ -f /install/cdrom/distro.img
-
+else
+ tar -x -C $(MNThdd)/ -f /install/cdrom/distro.img
+endif
echo "LANGUAGE=en" >> $(MNThdd)/var/ipfire/main/settings
echo "HOSTNAME=$(SNAME)" >> $(MNThdd)/var/ipfire/main/settings
echo "THEME=ipfire" >> $(MNThdd)/var/ipfire/main/settings
diff --git a/lfs/igb b/lfs/igb
index b8aadc4..fa762e0 100644
--- a/lfs/igb
+++ b/lfs/igb
@@ -27,7 +27,7 @@ include Config
VERSUFIX = ipfire$(KCFG)
MODPATH = /lib/modules/$(KVER)-$(VERSUFIX)/kernel/drivers/net/ethernet/intel/igb/
-VER = 5.1.2
+VER = 5.2.9.3
THISAPP = igb-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -43,7 +43,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = c222b04f7e43afffc105d0d0db60c6c0
+$(DL_FILE)_MD5 = 814395d3b76090f378002bddecfd2dfc
install : $(TARGET)
diff --git a/lfs/ixgbe b/lfs/ixgbe
new file mode 100644
index 0000000..00dd320
--- /dev/null
+++ b/lfs/ixgbe
@@ -0,0 +1,85 @@
+###############################################################################
+# #
+# IPFire.org - A linux based firewall #
+# Copyright (C) 2007-2014 IPFire Team <info(a)ipfire.org> #
+# #
+# This program is free software: you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation, either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# This program is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with this program. If not, see <http://www.gnu.org/licenses/>. #
+# #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VERSUFIX = ipfire$(KCFG)
+MODPATH = /lib/modules/$(KVER)-$(VERSUFIX)/kernel/drivers/net/ethernet/intel/ixgbe
+
+VER = 3.21.2
+
+THISAPP = ixgbe-$(VER)
+DL_FILE = $(THISAPP).tar.gz
+DL_FROM = $(URL_IPFIRE)
+DIR_APP = $(DIR_SRC)/$(THISAPP)
+TARGET = $(DIR_INFO)/$(THISAPP)-kmod-$(KVER)-$(VERSUFIX)
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+objects = $(DL_FILE)
+
+$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
+
+$(DL_FILE)_MD5 = dc635736d7e0ef5373131753f6609f38
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+dist:
+ $(PAK)
+
+###############################################################################
+# Downloading, checking, md5sum
+###############################################################################
+
+$(patsubst %,$(DIR_CHK)/%,$(objects)) :
+ @$(CHECK)
+
+$(patsubst %,$(DIR_DL)/%,$(objects)) :
+ @$(LOAD)
+
+$(subst %,%_MD5,$(objects)) :
+ @$(MD5)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+ @$(PREBUILD)
+ #Save original ixgbe module
+ -mv $(MODPATH)/ixgbe.ko \
+ $(MODPATH)/ixgbe.ko.org
+ @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
+ cd $(DIR_APP)/src && make BUILD_KERNEL=$(KVER)-$(VERSUFIX)
+ cd $(DIR_APP)/src && install -m 644 ixgbe.ko $(MODPATH)
+ @rm -rf $(DIR_APP)
+ @$(POSTBUILD)
diff --git a/lfs/linux b/lfs/linux
index f11bd5f..bcbdeb0 100644
--- a/lfs/linux
+++ b/lfs/linux
@@ -24,10 +24,11 @@
include Config
-VER = 3.10.44
+VER = 3.14.22
-RPI_PATCHES = linux-3.10.38-grsec-1b49b45
-GRS_PATCHES = grsecurity-2.9.1-3.10.44-ipfire1.patch.xz
+RPI_PATCHES = 3.14.22-grsec-ipfire1
+A7M_PATCHES = 3.14.22-grsec-ipfire1
+GRS_PATCHES = grsecurity-3.0-3.14.22-201410192047.patch.xz
THISAPP = linux-$(VER)
DL_FILE = linux-$(VER).tar.xz
@@ -36,7 +37,7 @@ DIR_APP = $(DIR_SRC)/$(THISAPP)
CFLAGS =
CXXFLAGS =
-PAK_VER = 51
+PAK_VER = 52
DEPS = ""
VERSUFIX=ipfire$(KCFG)
@@ -67,16 +68,19 @@ endif
###############################################################################
objects =$(DL_FILE) \
rpi-patches-$(RPI_PATCHES).patch.xz \
+ arm7-multi-patches-$(A7M_PATCHES).patch.xz \
$(GRS_PATCHES)
-$(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE)
-rpi-patches-$(RPI_PATCHES).patch.xz = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).patch.xz
-$(GRS_PATCHES) = $(URL_IPFIRE)/$(GRS_PATCHES)
+$(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE)
+rpi-patches-$(RPI_PATCHES).patch.xz = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).patch.xz
+arm7-multi-patches-$(A7M_PATCHES).patch.xz = $(URL_IPFIRE)/arm7-multi-patches-$(A7M_PATCHES).patch.xz
+$(GRS_PATCHES) = $(URL_IPFIRE)/$(GRS_PATCHES)
-$(DL_FILE)_MD5 = 8a4006eff3bbd8aff58fe4b443223e7a
-rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = a7408e8bad57b4b2cb677dd5a0bfb7ff
-$(GRS_PATCHES)_MD5 = 07e5d812146063ed5b2ce49d0d24099b
+$(DL_FILE)_MD5 = cb00fadd0a720cc2d1690792e72e0134
+rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = 75adff006d9dbc9be76e6c44eb80698f
+arm7-multi-patches-$(A7M_PATCHES).patch.xz_MD5 = 06cdc33ba0c28b4b5ec876d8f8297b82
+$(GRS_PATCHES)_MD5 = a63b899587068885951e762ad53f5b50
install : $(TARGET)
@@ -112,16 +116,13 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
ln -svf linux-$(VER) $(DIR_SRC)/linux
# Linux Intermediate Queueing Device
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.30-imq.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-imq.patch
# ipp2p 0.8.2-ipfire
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10-ipp2p-0.8.2-ipfire.patch
# Layer7-patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10-layer7-filter.patch
-
- # pie packet scheduler
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.39-pie_packet_sch.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14-layer7-filter.patch
# Grsecurity-patches
ifneq "$(KCFG)" "-headers"
@@ -130,17 +131,15 @@ ifneq "$(KCFG)" "-headers"
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.7-disable-compat_vdso.patch
endif
- # Remove ACPI Blacklist message
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6-silence-acpi-blacklist.patch
-
# DVB Patches
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.9-dvbsky-wot2.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-dvbsky.patch
cd $(DIR_APP) && patch -Np2 < $(DIR_SRC)/src/patches/v4l-dvb_fix_tua6034_pll.patch
# Wlan Patches
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/compat-drivers-3.8.3-ath_ignore_eeprom_regdomain.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.34-iwlwifi-noibss_only_on_radar_chan.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.37-rt2800usb_add_dlink_dwa137_usbid.patch
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.39-add_libertas_uap.patch
# mISDN Patches
@@ -160,81 +159,15 @@ endif
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2.33_ipg-fix-driver-name.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch
- # Moschip 7830 link detection
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.y-usbnet_mcs7830_rework_link_detect.patch
-
-
ifeq "$(KCFG)" "-kirkwood"
- # Add dreamplug,guruplug and icy 62x0 support on ARM-kirkwood
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.10-arm_kirkwood_setups.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.10-mv_cesa_disable_failing_hmac_sha1.patch
endif
ifeq "$(KCFG)" "-multi"
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10.27-fs-exec-atomic64-operand-requires-impossible-reload.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.10-smsc95xx-add_mac_addr_param.patch
- # Patchset for Omap (beagle/panda).
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/0002-omap2-twl-common-Add-default-power-configuration.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/sakoman/0001-OMAP-DSS2-add-bootarg-for-selecting-svideo.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/sakoman/0002-video-add-timings-for-hd720.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0001-Beagle-expansion-add-buddy-param-for-expansionboard-.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0002-Beagle-expansion-add-zippy.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0003-Beagle-expansion-add-zippy2.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0004-Beagle-expansion-add-trainer.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0005-Beagle-expansion-add-CircuitCo-ulcd-Support.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0006-Beagle-expansion-add-wifi.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0007-Beagle-expansion-add-beaglefpga.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0008-Beagle-expansion-add-spidev.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0009-Beagle-expansion-add-Aptina-li5m03-camera.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0010-Beagle-expansion-add-LSR-COM6L-Adapter-Board.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/expansion/0011-Beagle-expansion-LSR-COM6L-Adapter-Board-also-initia.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0001-meego-modedb-add-Toshiba-LTA070B220F-800x480-support.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0002-backlight-Add-TLC59108-backlight-control-driver.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0003-tlc59108-adjust-for-beagleboard-uLCD7.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0004-zeroMAP-Open-your-eyes.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0005-ARM-OMAP-Beagle-use-TWL4030-generic-reset-script.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/beagle/0006-DSS2-use-DSI-PLL-for-DPI-with-OMAP3.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0001-panda-fix-wl12xx-regulator.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0002-ti-st-st-kim-fixing-firmware-path.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0003-Panda-expansion-add-spidev.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0004-HACK-PandaES-disable-cpufreq-so-board-will-boot.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0006-ARM-hw_breakpoint-Enable-debug-powerdown-only-if-sys.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0007-Revert-regulator-twl-Remove-TWL6030_FIXED_RESOURCE.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0008-Revert-regulator-twl-Remove-another-unused-variable-.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0009-Revert-regulator-twl-Remove-references-to-the-twl403.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0010-Revert-regulator-twl-Remove-references-to-32kHz-cloc.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/panda/0011-panda-spidev-setup-pinmux.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/omap/sgx/0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch
-
- # Patchset for Wandboard.
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0001-imx6qdl-wandboard-dts-backport.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0002-ARM-dts-imx6qdl-wandboard-add-gpio-lines-to-wandboar.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0003-ARM-dts-imx6qdl-wandboard-Add-support-for-i2c1.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0004-ARM-dts-wandboard-add-binding-for-wand-rfkill-driver.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0005-ARM-dts-imx6qdl-add-pcie-device-node.patch
-
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0001-i2c-imx-retry-on-NAK.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0002-i.MX6-Wandboard-add-CKO1-clock-output.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0003-thermal-add-imx-thermal-driver-support.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0004-ARM-i.MX6-Wandboard-add-wifi-bt-rfkill-driver.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0005-Add-IMX6Q-AHCI-support.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0006-imx-Add-IMX53-AHCI-support.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0007-imx6-enable-sata-clk-if-SATA_AHCI_PLATFORM.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0008-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0009-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0010-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
- cd $(DIR_APP) && patch -Np0 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0011-add-pcie-designware.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0012-pcie-backport-fixes.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0013-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0014-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0015-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0016-imx6-pci-tweaks.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0017-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/imx/0018-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
-
- # Patchset for Compulab Utilite.
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch
+ # Apply Arm7-multiarch kernel patches.
+ cd $(DIR_APP) && xzcat $(DIR_DL)/arm7-multi-patches-$(A7M_PATCHES).patch.xz | patch -Np1
endif
ifeq "$(KCFG)" "-rpi"
@@ -293,16 +226,6 @@ ifeq "$(MACHINE_TYPE)" "arm"
done
endif
- # Create initramfs images
- dracut --force --verbose --strip --xz /boot/initramfs-$(KVER)-$(VERSUFIX).img $(KVER)-$(VERSUFIX)
-
-ifeq "$(KCFG)" "-kirkwood"
- cd /boot && mkimage -A arm -T ramdisk -C lzma -d initramfs-$(KVER)-$(VERSUFIX).img uInit-$(VERSUFIX)
-endif
-
-ifeq "$(KCFG)" "-multi"
- cd /boot && mkimage -A arm -T ramdisk -C lzma -d initramfs-$(KVER)-$(VERSUFIX).img uInit-$(VERSUFIX)
-endif
ifeq "$(LASTKERNEL)" "1"
# Only do this once
@@ -331,5 +254,9 @@ ifeq "$(LASTKERNEL)" "1"
endif
endif
+ #force new build of external modules and initrd if the kernel was rebuild
+ -rm -f /usr/src/log/*-kmod-$(VER)-$(VERSUFIX)
+ -rm -f /usr/src/log/linux-initrd-$(VER)-$(VERSUFIX)
+
@rm -rf $(DIR_SRC)/patch-o-matic* $(DIR_SRC)/iptables* $(DIR_SRC)/squashfs* $(DIR_SRC)/netfilter-layer7-*
@$(POSTBUILD)
diff --git a/lfs/linux-initrd b/lfs/linux-initrd
new file mode 100644
index 0000000..1b048b5
--- /dev/null
+++ b/lfs/linux-initrd
@@ -0,0 +1,70 @@
+###############################################################################
+# #
+# IPFire.org - A linux based firewall #
+# Copyright (C) 2007-2014 IPFire Team <info(a)ipfire.org> #
+# #
+# This program is free software: you can redistribute it and/or modify #
+# it under the terms of the GNU General Public License as published by #
+# the Free Software Foundation, either version 3 of the License, or #
+# (at your option) any later version. #
+# #
+# This program is distributed in the hope that it will be useful, #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
+# GNU General Public License for more details. #
+# #
+# You should have received a copy of the GNU General Public License #
+# along with this program. If not, see <http://www.gnu.org/licenses/>. #
+# #
+###############################################################################
+
+###############################################################################
+# Definitions
+###############################################################################
+
+include Config
+
+VER = $(KVER)
+
+THISAPP = linux-initrd-$(VER)
+
+VERSUFIX=ipfire$(KCFG)
+
+TARGET = $(DIR_INFO)/$(THISAPP)-$(VERSUFIX)
+
+###############################################################################
+# Top-level Rules
+###############################################################################
+
+install : $(TARGET)
+
+check : $(patsubst %,$(DIR_CHK)/%,$(objects))
+
+download :$(patsubst %,$(DIR_DL)/%,$(objects))
+
+md5 : $(subst %,%_MD5,$(objects))
+
+dist:
+ @$(PAK)
+
+###############################################################################
+# Installation Details
+###############################################################################
+
+$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
+ @$(PREBUILD)
+
+ # rebuild module deps
+ depmod -a $(KVER)-$(VERSUFIX)
+
+ # Create initramfs images
+ dracut --force --verbose --strip --xz /boot/initramfs-$(KVER)-$(VERSUFIX).img $(KVER)-$(VERSUFIX)
+
+ifeq "$(KCFG)" "-kirkwood"
+ cd /boot && mkimage -A arm -T ramdisk -C lzma -d initramfs-$(KVER)-$(VERSUFIX).img uInit-$(VERSUFIX)
+endif
+
+ifeq "$(KCFG)" "-multi"
+ cd /boot && mkimage -A arm -T ramdisk -C lzma -d initramfs-$(KVER)-$(VERSUFIX).img uInit-$(VERSUFIX)
+endif
+ @$(POSTBUILD)
diff --git a/make.sh b/make.sh
index b54499d..3121fdd 100755
--- a/make.sh
+++ b/make.sh
@@ -418,6 +418,8 @@ buildipfire() {
# ipfiremake r8101 KCFG="-pae"
ipfiremake e1000e KCFG="-pae"
ipfiremake igb KCFG="-pae"
+ ipfiremake ixgbe KCFG="-pae"
+ ipfiremake linux-initrd KCFG="-pae"
# x86 kernel build
ipfiremake linux KCFG=""
@@ -431,6 +433,8 @@ buildipfire() {
# ipfiremake r8101 KCFG=""
ipfiremake e1000e KCFG=""
ipfiremake igb KCFG=""
+ ipfiremake ixgbe KCFG=""
+ ipfiremake linux-initrd KCFG=""
;;
armv5tel)
@@ -440,12 +444,15 @@ buildipfire() {
# ipfiremake mISDN KCFG="-rpi" NOPCI=1
ipfiremake cryptodev KCFG="-rpi"
# ipfiremake compat-drivers KCFG="-rpi"
+ ipfiremake linux-initrd KCFG="-rpi"
# arm multi platform (Panda, Wandboard ...) kernel build
ipfiremake linux KCFG="-multi"
ipfiremake cryptodev KCFG="-multi"
ipfiremake e1000e KCFG="-multi"
ipfiremake igb KCFG="-multi"
+ ipfiremake ixgbe KCFG="-multi"
+ ipfiremake linux-initrd KCFG="-multi"
# arm-kirkwood (Dreamplug, ICY-Box ...) kernel build
ipfiremake linux KCFG="-kirkwood"
@@ -456,8 +463,10 @@ buildipfire() {
# ipfiremake r8169 KCFG="-kirkwood"
# ipfiremake r8168 KCFG="-kirkwood"
# ipfiremake r8101 KCFG="-kirkwood"
-# ipfiremake e1000e KCFG="-kirkwood"
+ ipfiremake e1000e KCFG="-kirkwood"
ipfiremake igb KCFG="-kirkwood"
+ ipfiremake ixgbe KCFG="-kirkwood"
+ ipfiremake linux-initrd KCFG="-kirkwood"
;;
esac
ipfiremake pkg-config
diff --git a/src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch b/src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch
new file mode 100644
index 0000000..a03642d
--- /dev/null
+++ b/src/patches/linux-3.10.55-rt2800usb-change_queue_warn_to_debug.patch
@@ -0,0 +1,30 @@
+diff -Naur linux-3.10.55.org/drivers/net/wireless/rt2x00/rt2800usb.c linux-3.10.55/drivers/net/wireless/rt2x00/rt2800usb.c
+--- linux-3.10.55.org/drivers/net/wireless/rt2x00/rt2800usb.c 2014-09-17 18:04:18.000000000 +0200
++++ linux-3.10.55/drivers/net/wireless/rt2x00/rt2800usb.c 2014-10-05 19:25:25.070972490 +0200
+@@ -128,7 +128,7 @@
+
+ tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
+ if (unlikely(tout))
+- rt2x00_warn(entry->queue->rt2x00dev,
++ rt2x00_dbg(entry->queue->rt2x00dev,
+ "TX status timeout for entry %d in queue %d\n",
+ entry->entry_idx, entry->queue->qid);
+ return tout;
+@@ -569,7 +569,7 @@
+ queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
+
+ if (unlikely(rt2x00queue_empty(queue))) {
+- rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
++ rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
+ qid);
+ break;
+ }
+@@ -578,7 +578,7 @@
+
+ if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
+- rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
++ rt2x00_dbg(rt2x00dev, "Data pending for entry %u in queue %u\n",
+ entry->entry_idx, qid);
+ break;
+ }
diff --git a/src/patches/linux-3.10.57-mmc_add_eMMC_5.x.patch b/src/patches/linux-3.10.57-mmc_add_eMMC_5.x.patch
new file mode 100644
index 0000000..7fa4330
--- /dev/null
+++ b/src/patches/linux-3.10.57-mmc_add_eMMC_5.x.patch
@@ -0,0 +1,12 @@
+diff -Naur linux-3.10.57.org/drivers/mmc/core/mmc.c linux-3.10.57/drivers/mmc/core/mmc.c
+--- linux-3.10.57.org/drivers/mmc/core/mmc.c 2014-10-09 21:18:54.000000000 +0200
++++ linux-3.10.57/drivers/mmc/core/mmc.c 2014-10-11 09:20:02.225472403 +0200
+@@ -293,7 +293,7 @@
+ }
+
+ card->ext_csd.rev = ext_csd[EXT_CSD_REV];
+- if (card->ext_csd.rev > 6) {
++ if (card->ext_csd.rev > 7) {
+ pr_err("%s: unrecognised EXT_CSD revision %d\n",
+ mmc_hostname(card->host), card->ext_csd.rev);
+ err = -EINVAL;
diff --git a/src/patches/linux-3.14-layer7-filter.patch b/src/patches/linux-3.14-layer7-filter.patch
new file mode 100644
index 0000000..ba799f7
--- /dev/null
+++ b/src/patches/linux-3.14-layer7-filter.patch
@@ -0,0 +1,2165 @@
+diff -Naur linux-3.14.22.org/include/linux/netfilter/xt_layer7.h linux-3.14.22/include/linux/netfilter/xt_layer7.h
+--- linux-3.14.22.org/include/linux/netfilter/xt_layer7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/include/linux/netfilter/xt_layer7.h 2014-10-24 15:33:21.281274380 +0200
+@@ -0,0 +1,14 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++ char protocol[MAX_PROTOCOL_LEN];
++ char pattern[MAX_PATTERN_LEN];
++ u_int8_t invert;
++ u_int8_t pkt;
++};
++
++#endif /* _XT_LAYER7_H */
+diff -Naur linux-3.14.22.org/include/net/netfilter/nf_conntrack.h linux-3.14.22/include/net/netfilter/nf_conntrack.h
+--- linux-3.14.22.org/include/net/netfilter/nf_conntrack.h 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/include/net/netfilter/nf_conntrack.h 2014-10-24 15:33:21.281274380 +0200
+@@ -105,6 +105,22 @@
+ struct net *ct_net;
+ #endif
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ struct {
++ /*
++ * e.g. "http". NULL before decision. "unknown" after decision
++ * if no match.
++ */
++ char *app_proto;
++ /*
++ * application layer data so far. NULL after match decision.
++ */
++ char *app_data;
++ unsigned int app_data_len;
++ } layer7;
++#endif
++
+ /* Storage reserved for other modules, must be the last member */
+ union nf_conntrack_proto proto;
+ };
+diff -Naur linux-3.14.22.org/include/uapi/linux/netfilter/Kbuild linux-3.14.22/include/uapi/linux/netfilter/Kbuild
+--- linux-3.14.22.org/include/uapi/linux/netfilter/Kbuild 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/include/uapi/linux/netfilter/Kbuild 2014-10-24 15:34:39.721663344 +0200
+@@ -59,6 +59,7 @@
+ header-y += xt_iprange.h
+ header-y += xt_ipvs.h
+ header-y += xt_l2tp.h
++header-y += xt_layer7.h
+ header-y += xt_length.h
+ header-y += xt_limit.h
+ header-y += xt_mac.h
+diff -Naur linux-3.14.22.org/net/netfilter/Kconfig linux-3.14.22/net/netfilter/Kconfig
+--- linux-3.14.22.org/net/netfilter/Kconfig 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/net/netfilter/Kconfig 2014-10-24 15:33:21.281274380 +0200
+@@ -1153,6 +1153,26 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7
++ tristate '"layer7" match support'
++ depends on NETFILTER_XTABLES
++ depends on NETFILTER_ADVANCED
++ depends on NF_CONNTRACK
++ help
++ Say Y if you want to be able to classify connections (and their
++ packets) based on regular expression matching of their application
++ layer data. This is one way to classify applications such as
++ peer-to-peer filesharing systems that do not always use the same
++ port.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
+ config NETFILTER_XT_MATCH_LENGTH
+ tristate '"length" match support'
+ depends on NETFILTER_ADVANCED
+@@ -1347,6 +1367,12 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++ bool 'Layer 7 debugging output'
++ depends on NETFILTER_XT_MATCH_LAYER7
++ help
++ Say Y to get lots of debugging output.
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ tristate '"statistic" match support'
+ depends on NETFILTER_ADVANCED
+diff -Naur linux-3.14.22.org/net/netfilter/Makefile linux-3.14.22/net/netfilter/Makefile
+--- linux-3.14.22.org/net/netfilter/Makefile 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/net/netfilter/Makefile 2014-10-24 15:33:21.281274380 +0200
+@@ -158,6 +158,7 @@
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+diff -Naur linux-3.14.22.org/net/netfilter/nf_conntrack_core.c linux-3.14.22/net/netfilter/nf_conntrack_core.c
+--- linux-3.14.22.org/net/netfilter/nf_conntrack_core.c 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/net/netfilter/nf_conntrack_core.c 2014-10-24 15:33:21.281274380 +0200
+@@ -220,6 +220,13 @@
+ * too. */
+ nf_ct_remove_expectations(ct);
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto)
++ kfree(ct->layer7.app_proto);
++ if(ct->layer7.app_data)
++ kfree(ct->layer7.app_data);
++#endif
++
+ /* We overload first tuple to link into unconfirmed or dying list.*/
+ BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+ hlist_nulls_del_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
+diff -Naur linux-3.14.22.org/net/netfilter/nf_conntrack_standalone.c linux-3.14.22/net/netfilter/nf_conntrack_standalone.c
+--- linux-3.14.22.org/net/netfilter/nf_conntrack_standalone.c 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/net/netfilter/nf_conntrack_standalone.c 2014-10-24 15:33:21.285274399 +0200
+@@ -240,6 +240,12 @@
+ if (ct_show_delta_time(s, ct))
+ goto release;
+
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++ if(ct->layer7.app_proto &&
++ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++ return -ENOSPC;
++#endif
++
+ if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ goto release;
+
+diff -Naur linux-3.14.22.org/net/netfilter/regexp/regexp.c linux-3.14.22/net/netfilter/regexp/regexp.c
+--- linux-3.14.22.org/net/netfilter/regexp/regexp.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/net/netfilter/regexp/regexp.c 2014-10-24 15:33:21.285274399 +0200
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c 1.3 of 18 April 87
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions. Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt. Lets it work in both kernel and user space.
++(So iptables can use it, for instance.) Yea, it goes both ways... */
++#if __KERNEL__
++ #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++ #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++ printk("<3>Regexp: %s\n", s);
++ /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases. They are:
++ *
++ * regstart char that must begin a match; '\0' if none obvious
++ * reganch is the match anchored (at beginning-of-line only)?
++ * regmust string (pointer into program) that match must include, or NULL
++ * regmlen length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot. Regmust permits fast rejection
++ * of lines that cannot possibly match. The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup). Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program". This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology). Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand. "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives. (Here we
++ * have one of the subtle syntax dependencies: an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.) The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM. In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure: the tail of the branch connects
++ * to the thing following the set of BRANCHes.) The opcodes are:
++ */
++
++/* definition number opnd? meaning */
++#define END 0 /* no End of program. */
++#define BOL 1 /* no Match "" at beginning of line. */
++#define EOL 2 /* no Match "" at end of line. */
++#define ANY 3 /* no Match any one character. */
++#define ANYOF 4 /* str Match any character in this string. */
++#define ANYBUT 5 /* str Match any character not in this string. */
++#define BRANCH 6 /* node Match this alternative, or the next... */
++#define BACK 7 /* no Match "", "next" ptr points backward. */
++#define EXACTLY 8 /* str Match this string. */
++#define NOTHING 9 /* no Match empty string. */
++#define STAR 10 /* node Match this (simple) thing 0 or more times. */
++#define PLUS 11 /* node Match this (simple) thing 1 or more times. */
++#define OPEN 20 /* no Mark this point in input as start of #n. */
++ /* OPEN+1 is number 1, etc. */
++#define CLOSE 30 /* no Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH The set of branches constituting a single choice are hooked
++ * together with their "next" pointers, since precedence prevents
++ * anything being concatenated to any individual branch. The
++ * "next" pointer of the last BRANCH in a choice points to the
++ * thing following the whole choice. This is also where the
++ * final "next" pointer of each individual branch points; each
++ * branch starts with the operand node of a BRANCH node.
++ *
++ * BACK Normal "next" pointers all implicitly point forward; BACK
++ * exists to make loop structures possible.
++ *
++ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
++ * BRANCH structures using BACK. Simple cases (one character
++ * per match) are implemented with STAR and PLUS for speed
++ * and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE ...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first. The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node. (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define OP(p) (*(p))
++#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define OPERAND(p) ((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#define FAIL(m) { regerror(m); return(NULL); }
++#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
++#define META "^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define HASWIDTH 01 /* Known never to match null string. */
++#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
++#define SPSTART 04 /* Starts with * or +. */
++#define WORST 0 /* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput; /* String-input pointer. */
++char *regbol; /* Beginning of input, for ^ check. */
++char **regstartp; /* Pointer to startp array. */
++char **regendp; /* Ditto for endp. */
++char *regparse; /* Input-scan pointer. */
++int regnpar; /* () count. */
++char regdummy;
++char *regcode; /* Code-emit pointer; ®dummy = don't. */
++long regsize; /* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define STATIC static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++ char *scan1;
++ char *scan2;
++ int count;
++
++ count = 0;
++ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */
++ if (*scan1 == *scan2++)
++ return(count);
++ count++;
++ }
++ return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code. So we cheat: we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it. (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++ register regexp *r;
++ register char *scan;
++ register char *longest;
++ register int len;
++ int flags;
++ struct match_globals g;
++
++ /* commented out by ethan
++ extern char *malloc();
++ */
++
++ if (exp == NULL)
++ FAIL("NULL argument");
++
++ /* First pass: determine size, legality. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regsize = 0L;
++ g.regcode = &g.regdummy;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Small enough for pointer-storage convention? */
++ if (g.regsize >= 32767L) /* Probably could be 65535L. */
++ FAIL("regexp too big");
++
++ /* Allocate space. */
++ *patternsize=sizeof(regexp) + (unsigned)g.regsize;
++ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++ if (r == NULL)
++ FAIL("out of space");
++
++ /* Second pass: emit code. */
++ g.regparse = exp;
++ g.regnpar = 1;
++ g.regcode = r->program;
++ regc(&g, MAGIC);
++ if (reg(&g, 0, &flags) == NULL)
++ return(NULL);
++
++ /* Dig out information for optimizations. */
++ r->regstart = '\0'; /* Worst-case defaults. */
++ r->reganch = 0;
++ r->regmust = NULL;
++ r->regmlen = 0;
++ scan = r->program+1; /* First BRANCH. */
++ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */
++ scan = OPERAND(scan);
++
++ /* Starting-point info. */
++ if (OP(scan) == EXACTLY)
++ r->regstart = *OPERAND(scan);
++ else if (OP(scan) == BOL)
++ r->reganch++;
++
++ /*
++ * If there's something expensive in the r.e., find the
++ * longest literal string that must appear and make it the
++ * regmust. Resolve ties in favor of later strings, since
++ * the regstart check works with the beginning of the r.e.
++ * and avoiding duplication strengthens checking. Not a
++ * strong reason, but sufficient in the absence of others.
++ */
++ if (flags&SPSTART) {
++ longest = NULL;
++ len = 0;
++ for (; scan != NULL; scan = regnext(&g, scan))
++ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++ longest = OPERAND(scan);
++ len = strlen(OPERAND(scan));
++ }
++ r->regmust = longest;
++ r->regmlen = len;
++ }
++ }
++
++ return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++ register char *ret;
++ register char *br;
++ register char *ender;
++ register int parno = 0; /* 0 makes gcc happy */
++ int flags;
++
++ *flagp = HASWIDTH; /* Tentatively. */
++
++ /* Make an OPEN node, if parenthesized. */
++ if (paren) {
++ if (g->regnpar >= NSUBEXP)
++ FAIL("too many ()");
++ parno = g->regnpar;
++ g->regnpar++;
++ ret = regnode(g, OPEN+parno);
++ } else
++ ret = NULL;
++
++ /* Pick up the branches, linking them together. */
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ if (ret != NULL)
++ regtail(g, ret, br); /* OPEN -> first. */
++ else
++ ret = br;
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ while (*g->regparse == '|') {
++ g->regparse++;
++ br = regbranch(g, &flags);
++ if (br == NULL)
++ return(NULL);
++ regtail(g, ret, br); /* BRANCH -> BRANCH. */
++ if (!(flags&HASWIDTH))
++ *flagp &= ~HASWIDTH;
++ *flagp |= flags&SPSTART;
++ }
++
++ /* Make a closing node, and hook it on the end. */
++ ender = regnode(g, (paren) ? CLOSE+parno : END);
++ regtail(g, ret, ender);
++
++ /* Hook the tails of the branches to the closing node. */
++ for (br = ret; br != NULL; br = regnext(g, br))
++ regoptail(g, br, ender);
++
++ /* Check for proper termination. */
++ if (paren && *g->regparse++ != ')') {
++ FAIL("unmatched ()");
++ } else if (!paren && *g->regparse != '\0') {
++ if (*g->regparse == ')') {
++ FAIL("unmatched ()");
++ } else
++ FAIL("junk on end"); /* "Can't happen". */
++ /* NOTREACHED */
++ }
++
++ return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char *chain;
++ register char *latest;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ ret = regnode(g, BRANCH);
++ chain = NULL;
++ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++ latest = regpiece(g, &flags);
++ if (latest == NULL)
++ return(NULL);
++ *flagp |= flags&HASWIDTH;
++ if (chain == NULL) /* First piece. */
++ *flagp |= flags&SPSTART;
++ else
++ regtail(g, chain, latest);
++ chain = latest;
++ }
++ if (chain == NULL) /* Loop ran zero times. */
++ (void) regnode(g, NOTHING);
++
++ return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized: they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ register char op;
++ register char *next;
++ int flags;
++
++ ret = regatom(g, &flags);
++ if (ret == NULL)
++ return(NULL);
++
++ op = *g->regparse;
++ if (!ISMULT(op)) {
++ *flagp = flags;
++ return(ret);
++ }
++
++ if (!(flags&HASWIDTH) && op != '?')
++ FAIL("*+ operand could be empty");
++ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++ if (op == '*' && (flags&SIMPLE))
++ reginsert(g, STAR, ret);
++ else if (op == '*') {
++ /* Emit x* as (x&|), where & means "self". */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regoptail(g, ret, regnode(g, BACK)); /* and loop */
++ regoptail(g, ret, ret); /* back */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '+' && (flags&SIMPLE))
++ reginsert(g, PLUS, ret);
++ else if (op == '+') {
++ /* Emit x+ as x(&|), where & means "self". */
++ next = regnode(g, BRANCH); /* Either */
++ regtail(g, ret, next);
++ regtail(g, regnode(g, BACK), ret); /* loop back */
++ regtail(g, next, regnode(g, BRANCH)); /* or */
++ regtail(g, ret, regnode(g, NOTHING)); /* null. */
++ } else if (op == '?') {
++ /* Emit x? as (x|) */
++ reginsert(g, BRANCH, ret); /* Either x */
++ regtail(g, ret, regnode(g, BRANCH)); /* or */
++ next = regnode(g, NOTHING); /* null. */
++ regtail(g, ret, next);
++ regoptail(g, ret, next);
++ }
++ g->regparse++;
++ if (ISMULT(*g->regparse))
++ FAIL("nested *?+");
++
++ return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization: gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run. Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++ register char *ret;
++ int flags;
++
++ *flagp = WORST; /* Tentatively. */
++
++ switch (*g->regparse++) {
++ case '^':
++ ret = regnode(g, BOL);
++ break;
++ case '$':
++ ret = regnode(g, EOL);
++ break;
++ case '.':
++ ret = regnode(g, ANY);
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ case '[': {
++ register int class;
++ register int classend;
++
++ if (*g->regparse == '^') { /* Complement of range. */
++ ret = regnode(g, ANYBUT);
++ g->regparse++;
++ } else
++ ret = regnode(g, ANYOF);
++ if (*g->regparse == ']' || *g->regparse == '-')
++ regc(g, *g->regparse++);
++ while (*g->regparse != '\0' && *g->regparse != ']') {
++ if (*g->regparse == '-') {
++ g->regparse++;
++ if (*g->regparse == ']' || *g->regparse == '\0')
++ regc(g, '-');
++ else {
++ class = UCHARAT(g->regparse-2)+1;
++ classend = UCHARAT(g->regparse);
++ if (class > classend+1)
++ FAIL("invalid [] range");
++ for (; class <= classend; class++)
++ regc(g, class);
++ g->regparse++;
++ }
++ } else
++ regc(g, *g->regparse++);
++ }
++ regc(g, '\0');
++ if (*g->regparse != ']')
++ FAIL("unmatched []");
++ g->regparse++;
++ *flagp |= HASWIDTH|SIMPLE;
++ }
++ break;
++ case '(':
++ ret = reg(g, 1, &flags);
++ if (ret == NULL)
++ return(NULL);
++ *flagp |= flags&(HASWIDTH|SPSTART);
++ break;
++ case '\0':
++ case '|':
++ case ')':
++ FAIL("internal urp"); /* Supposed to be caught earlier. */
++ break;
++ case '?':
++ case '+':
++ case '*':
++ FAIL("?+* follows nothing");
++ break;
++ case '\\':
++ if (*g->regparse == '\0')
++ FAIL("trailing \\");
++ ret = regnode(g, EXACTLY);
++ regc(g, *g->regparse++);
++ regc(g, '\0');
++ *flagp |= HASWIDTH|SIMPLE;
++ break;
++ default: {
++ register int len;
++ register char ender;
++
++ g->regparse--;
++ len = my_strcspn((const char *)g->regparse, (const char *)META);
++ if (len <= 0)
++ FAIL("internal disaster");
++ ender = *(g->regparse+len);
++ if (len > 1 && ISMULT(ender))
++ len--; /* Back off clear of ?+* operand. */
++ *flagp |= HASWIDTH;
++ if (len == 1)
++ *flagp |= SIMPLE;
++ ret = regnode(g, EXACTLY);
++ while (len > 0) {
++ regc(g, *g->regparse++);
++ len--;
++ }
++ regc(g, '\0');
++ }
++ break;
++ }
++
++ return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char * /* Location. */
++regnode(struct match_globals *g, char op)
++{
++ register char *ret;
++ register char *ptr;
++
++ ret = g->regcode;
++ if (ret == &g->regdummy) {
++ g->regsize += 3;
++ return(ret);
++ }
++
++ ptr = ret;
++ *ptr++ = op;
++ *ptr++ = '\0'; /* Null "next" pointer. */
++ *ptr++ = '\0';
++ g->regcode = ptr;
++
++ return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++ if (g->regcode != &g->regdummy)
++ *g->regcode++ = b;
++ else
++ g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++ register char *src;
++ register char *dst;
++ register char *place;
++
++ if (g->regcode == &g->regdummy) {
++ g->regsize += 3;
++ return;
++ }
++
++ src = g->regcode;
++ g->regcode += 3;
++ dst = g->regcode;
++ while (src > opnd)
++ *--dst = *--src;
++
++ place = opnd; /* Op node, where operand used to be. */
++ *place++ = op;
++ *place++ = '\0';
++ *place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++ register char *scan;
++ register char *temp;
++ register int offset;
++
++ if (p == &g->regdummy)
++ return;
++
++ /* Find last node. */
++ scan = p;
++ for (;;) {
++ temp = regnext(g, scan);
++ if (temp == NULL)
++ break;
++ scan = temp;
++ }
++
++ if (OP(scan) == BACK)
++ offset = scan - val;
++ else
++ offset = val - scan;
++ *(scan+1) = (offset>>8)&0377;
++ *(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++ /* "Operandless" and "op != BRANCH" are synonymous in practice. */
++ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++ return;
++ regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++ register char *s;
++ struct match_globals g;
++
++ /* Be paranoid... */
++ if (prog == NULL || string == NULL) {
++ printk("<3>Regexp: NULL parameter\n");
++ return(0);
++ }
++
++ /* Check validity of program. */
++ if (UCHARAT(prog->program) != MAGIC) {
++ printk("<3>Regexp: corrupted program\n");
++ return(0);
++ }
++
++ /* If there is a "must appear" string, look for it. */
++ if (prog->regmust != NULL) {
++ s = string;
++ while ((s = strchr(s, prog->regmust[0])) != NULL) {
++ if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++ break; /* Found it. */
++ s++;
++ }
++ if (s == NULL) /* Not present. */
++ return(0);
++ }
++
++ /* Mark beginning of line for ^ . */
++ g.regbol = string;
++
++ /* Simplest case: anchored match need be tried only once. */
++ if (prog->reganch)
++ return(regtry(&g, prog, string));
++
++ /* Messy cases: unanchored match. */
++ s = string;
++ if (prog->regstart != '\0')
++ /* We know what char it must start with. */
++ while ((s = strchr(s, prog->regstart)) != NULL) {
++ if (regtry(&g, prog, s))
++ return(1);
++ s++;
++ }
++ else
++ /* We don't -- general case. */
++ do {
++ if (regtry(&g, prog, s))
++ return(1);
++ } while (*s++ != '\0');
++
++ /* Failure. */
++ return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int /* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++ register int i;
++ register char **sp;
++ register char **ep;
++
++ g->reginput = string;
++ g->regstartp = prog->startp;
++ g->regendp = prog->endp;
++
++ sp = prog->startp;
++ ep = prog->endp;
++ for (i = NSUBEXP; i > 0; i--) {
++ *sp++ = NULL;
++ *ep++ = NULL;
++ }
++ if (regmatch(g, prog->program + 1)) {
++ prog->startp[0] = string;
++ prog->endp[0] = g->reginput;
++ return(1);
++ } else
++ return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple: check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly. In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int /* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++ register char *scan = prog; /* Current node. */
++ char *next; /* Next node. */
++
++#ifdef DEBUG
++ if (scan != NULL && regnarrate)
++ fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++ while (scan != NULL) {
++#ifdef DEBUG
++ if (regnarrate)
++ fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++ next = regnext(g, scan);
++
++ switch (OP(scan)) {
++ case BOL:
++ if (g->reginput != g->regbol)
++ return(0);
++ break;
++ case EOL:
++ if (*g->reginput != '\0')
++ return(0);
++ break;
++ case ANY:
++ if (*g->reginput == '\0')
++ return(0);
++ g->reginput++;
++ break;
++ case EXACTLY: {
++ register int len;
++ register char *opnd;
++
++ opnd = OPERAND(scan);
++ /* Inline the first character, for speed. */
++ if (*opnd != *g->reginput)
++ return(0);
++ len = strlen(opnd);
++ if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++ return(0);
++ g->reginput += len;
++ }
++ break;
++ case ANYOF:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case ANYBUT:
++ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++ return(0);
++ g->reginput++;
++ break;
++ case NOTHING:
++ case BACK:
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9: {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - OPEN;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set startp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regstartp[no] == NULL)
++ g->regstartp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ {
++ register int no;
++ register char *save;
++
++ no = OP(scan) - CLOSE;
++ save = g->reginput;
++
++ if (regmatch(g, next)) {
++ /*
++ * Don't set endp if some later
++ * invocation of the same parentheses
++ * already has.
++ */
++ if (g->regendp[no] == NULL)
++ g->regendp[no] = save;
++ return(1);
++ } else
++ return(0);
++ }
++ break;
++ case BRANCH: {
++ register char *save;
++
++ if (OP(next) != BRANCH) /* No choice. */
++ next = OPERAND(scan); /* Avoid recursion. */
++ else {
++ do {
++ save = g->reginput;
++ if (regmatch(g, OPERAND(scan)))
++ return(1);
++ g->reginput = save;
++ scan = regnext(g, scan);
++ } while (scan != NULL && OP(scan) == BRANCH);
++ return(0);
++ /* NOTREACHED */
++ }
++ }
++ break;
++ case STAR:
++ case PLUS: {
++ register char nextch;
++ register int no;
++ register char *save;
++ register int min;
++
++ /*
++ * Lookahead to avoid useless match attempts
++ * when we know what character comes next.
++ */
++ nextch = '\0';
++ if (OP(next) == EXACTLY)
++ nextch = *OPERAND(next);
++ min = (OP(scan) == STAR) ? 0 : 1;
++ save = g->reginput;
++ no = regrepeat(g, OPERAND(scan));
++ while (no >= min) {
++ /* If it could work, try it. */
++ if (nextch == '\0' || *g->reginput == nextch)
++ if (regmatch(g, next))
++ return(1);
++ /* Couldn't or didn't -- back up. */
++ no--;
++ g->reginput = save + no;
++ }
++ return(0);
++ }
++ break;
++ case END:
++ return(1); /* Success! */
++ break;
++ default:
++ printk("<3>Regexp: memory corruption\n");
++ return(0);
++ break;
++ }
++
++ scan = next;
++ }
++
++ /*
++ * We get here only if there's trouble -- normally "case END" is
++ * the terminating point.
++ */
++ printk("<3>Regexp: corrupted pointers\n");
++ return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++ register int count = 0;
++ register char *scan;
++ register char *opnd;
++
++ scan = g->reginput;
++ opnd = OPERAND(p);
++ switch (OP(p)) {
++ case ANY:
++ count = strlen(scan);
++ scan += count;
++ break;
++ case EXACTLY:
++ while (*opnd == *scan) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYOF:
++ while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ case ANYBUT:
++ while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++ count++;
++ scan++;
++ }
++ break;
++ default: /* Oh dear. Called inappropriately. */
++ printk("<3>Regexp: internal foulup\n");
++ count = 0; /* Best compromise. */
++ break;
++ }
++ g->reginput = scan;
++
++ return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++ register int offset;
++
++ if (p == &g->regdummy)
++ return(NULL);
++
++ offset = NEXT(p);
++ if (offset == 0)
++ return(NULL);
++
++ if (OP(p) == BACK)
++ return(p-offset);
++ else
++ return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++ register char *s;
++ register char op = EXACTLY; /* Arbitrary non-END op. */
++ register char *next;
++ /* extern char *strchr(); */
++
++
++ s = r->program + 1;
++ while (op != END) { /* While that wasn't END last time... */
++ op = OP(s);
++ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
++ next = regnext(s);
++ if (next == NULL) /* Next ptr. */
++ printf("(0)");
++ else
++ printf("(%d)", (s-r->program)+(next-s));
++ s += 3;
++ if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++ /* Literal string, where present. */
++ while (*s != '\0') {
++ putchar(*s);
++ s++;
++ }
++ s++;
++ }
++ putchar('\n');
++ }
++
++ /* Header fields of interest. */
++ if (r->regstart != '\0')
++ printf("start `%c' ", r->regstart);
++ if (r->reganch)
++ printf("anchored ");
++ if (r->regmust != NULL)
++ printf("must have \"%s\"", r->regmust);
++ printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++ register char *p;
++ static char buf[BUFLEN];
++
++ strcpy(buf, ":");
++
++ switch (OP(op)) {
++ case BOL:
++ p = "BOL";
++ break;
++ case EOL:
++ p = "EOL";
++ break;
++ case ANY:
++ p = "ANY";
++ break;
++ case ANYOF:
++ p = "ANYOF";
++ break;
++ case ANYBUT:
++ p = "ANYBUT";
++ break;
++ case BRANCH:
++ p = "BRANCH";
++ break;
++ case EXACTLY:
++ p = "EXACTLY";
++ break;
++ case NOTHING:
++ p = "NOTHING";
++ break;
++ case BACK:
++ p = "BACK";
++ break;
++ case END:
++ p = "END";
++ break;
++ case OPEN+1:
++ case OPEN+2:
++ case OPEN+3:
++ case OPEN+4:
++ case OPEN+5:
++ case OPEN+6:
++ case OPEN+7:
++ case OPEN+8:
++ case OPEN+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++ p = NULL;
++ break;
++ case CLOSE+1:
++ case CLOSE+2:
++ case CLOSE+3:
++ case CLOSE+4:
++ case CLOSE+5:
++ case CLOSE+6:
++ case CLOSE+7:
++ case CLOSE+8:
++ case CLOSE+9:
++ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++ p = NULL;
++ break;
++ case STAR:
++ p = "STAR";
++ break;
++ case PLUS:
++ p = "PLUS";
++ break;
++ default:
++ printk("<3>Regexp: corrupted opcode\n");
++ break;
++ }
++ if (p != NULL)
++ strncat(buf, p, BUFLEN-strlen(buf));
++ return(buf);
++}
++#endif
++
++
+diff -Naur linux-3.14.22.org/net/netfilter/regexp/regexp.h linux-3.14.22/net/netfilter/regexp/regexp.h
+--- linux-3.14.22.org/net/netfilter/regexp/regexp.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/net/netfilter/regexp/regexp.h 2014-10-24 15:33:21.285274399 +0200
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10. If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP 10
++typedef struct regexp {
++ char *startp[NSUBEXP];
++ char *endp[NSUBEXP];
++ char regstart; /* Internal use only. */
++ char reganch; /* Internal use only. */
++ char *regmust; /* Internal use only. */
++ int regmlen; /* Internal use only. */
++ char program[1]; /* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+diff -Naur linux-3.14.22.org/net/netfilter/regexp/regmagic.h linux-3.14.22/net/netfilter/regexp/regmagic.h
+--- linux-3.14.22.org/net/netfilter/regexp/regmagic.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/net/netfilter/regexp/regmagic.h 2014-10-24 15:33:21.285274399 +0200
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define MAGIC 0234
+diff -Naur linux-3.14.22.org/net/netfilter/regexp/regsub.c linux-3.14.22/net/netfilter/regexp/regsub.c
+--- linux-3.14.22.org/net/netfilter/regexp/regsub.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/net/netfilter/regexp/regsub.c 2014-10-24 15:33:21.285274399 +0200
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c 1.3 of 2 April 86
++ *
++ * Copyright (c) 1986 by University of Toronto.
++ * Written by Henry Spencer. Not derived from licensed software.
++ *
++ * Permission is granted to anyone to use this software for any
++ * purpose on any computer system, and to redistribute it freely,
++ * subject to the following restrictions:
++ *
++ * 1. The author is not responsible for the consequences of use of
++ * this software, no matter how awful, even if they arise
++ * from defects in it.
++ *
++ * 2. The origin of this software must not be misrepresented, either
++ * by explicit claim or by omission.
++ *
++ * 3. Altered versions must be plainly marked as such, and must not
++ * be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define UCHARAT(p) ((int)*(unsigned char *)(p))
++#else
++#define UCHARAT(p) ((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++// printk("regexp(3): %s", s);
++// /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++ register char *src;
++ register char *dst;
++ register char c;
++ register int no;
++ register int len;
++
++ /* Not necessary and gcc doesn't like it -MLS */
++ /*extern char *strncpy();*/
++
++ if (prog == NULL || source == NULL || dest == NULL) {
++ regerror("NULL parm to regsub");
++ return;
++ }
++ if (UCHARAT(prog->program) != MAGIC) {
++ regerror("damaged regexp fed to regsub");
++ return;
++ }
++
++ src = source;
++ dst = dest;
++ while ((c = *src++) != '\0') {
++ if (c == '&')
++ no = 0;
++ else if (c == '\\' && '0' <= *src && *src <= '9')
++ no = *src++ - '0';
++ else
++ no = -1;
++
++ if (no < 0) { /* Ordinary character. */
++ if (c == '\\' && (*src == '\\' || *src == '&'))
++ c = *src++;
++ *dst++ = c;
++ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++ len = prog->endp[no] - prog->startp[no];
++ (void) strncpy(dst, prog->startp[no], len);
++ dst += len;
++ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */
++ regerror("damaged match string");
++ return;
++ }
++ }
++ }
++ *dst++ = '\0';
++}
+diff -Naur linux-3.14.22.org/net/netfilter/xt_layer7.c linux-3.14.22/net/netfilter/xt_layer7.c
+--- linux-3.14.22.org/net/netfilter/xt_layer7.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.22/net/netfilter/xt_layer7.c 2014-10-24 15:33:21.285274399 +0200
+@@ -0,0 +1,665 @@
++/*
++ Kernel module to match application layer (OSI layer 7) data in connections.
++
++ http://l7-filter.sf.net
++
++ (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++ This program is free software; you can redistribute it and/or
++ modify it under the terms of the GNU General Public License
++ as published by the Free Software Foundation; either version
++ 2 of the License, or (at your option) any later version.
++ http://www.gnu.org/licenses/gpl.txt
++
++ Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield(a)freegates.be>,
++ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++ Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/seq_file.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong(a)users.sf.net>, Ethan Sommer <sommere(a)users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++ #define DPRINTK(format,args...) printk(format,##args)
++#else
++ #define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++ char * regex_string;
++ regexp * pattern;
++ struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++ struct nf_conn_counter *acct;
++
++ BUG_ON(ct == NULL);
++ acct = nf_conn_acct_find(ct);
++ if (!acct)
++ return 0;
++ return (atomic64_read(&acct[IP_CT_DIR_ORIGINAL].packets) + atomic64_read(&acct[IP_CT_DIR_REPLY].packets));
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++ int i;
++
++ if(!f) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "friendly_print, bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++){
++ if(isprint(s[i]) && s[i] < 128) f[i] = s[i];
++ else if(isspace(s[i])) f[i] = ' ';
++ else f[i] = '.';
++ }
++ f[i] = '\0';
++ return f;
++}
++
++static char dec2hex(int i)
++{
++ switch (i) {
++ case 0 ... 9:
++ return (i + '0');
++ break;
++ case 10 ... 15:
++ return (i - 10 + 'a');
++ break;
++ default:
++ if (net_ratelimit())
++ printk("layer7: Problem in dec2hex\n");
++ return '\0';
++ }
++}
++
++static char * hex_print(unsigned char * s)
++{
++ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++ int i;
++
++ if(!g) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in hex_print, "
++ "bailing.\n");
++ return NULL;
++ }
++
++ for(i = 0; i < strlen(s); i++) {
++ g[i*3 ] = dec2hex(s[i]/16);
++ g[i*3 + 1] = dec2hex(s[i]%16);
++ g[i*3 + 2] = ' ';
++ }
++ g[i*3] = '\0';
++
++ return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp. As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string,
++ const char * protocol)
++{
++ struct pattern_cache * node = first_pattern_cache;
++ struct pattern_cache * last_pattern_cache = first_pattern_cache;
++ struct pattern_cache * tmp;
++ unsigned int len;
++
++ while (node != NULL) {
++ if (!strcmp(node->regex_string, regex_string))
++ return node->pattern;
++
++ last_pattern_cache = node;/* points at the last non-NULL node */
++ node = node->next;
++ }
++
++ /* If we reach the end of the list, then we have not yet cached
++ the pattern for this regex. Let's do that now.
++ Be paranoid about running out of memory to avoid list corruption. */
++ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++ if(!tmp) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ return NULL;
++ }
++
++ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC);
++ tmp->next = NULL;
++
++ if(!tmp->regex_string || !tmp->pattern) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "compile_and_cache, bailing.\n");
++ kfree(tmp->regex_string);
++ kfree(tmp->pattern);
++ kfree(tmp);
++ return NULL;
++ }
++
++ /* Ok. The new node is all ready now. */
++ node = tmp;
++
++ if(first_pattern_cache == NULL) /* list is empty */
++ first_pattern_cache = node; /* make node the beginning */
++ else
++ last_pattern_cache->next = node; /* attach node to the end */
++
++ /* copy the string and compile the regex */
++ len = strlen(regex_string);
++ DPRINTK("About to compile this: \"%s\"\n", regex_string);
++ node->pattern = regcomp((char *)regex_string, &len);
++ if ( !node->pattern ) {
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: Error compiling regexp "
++ "\"%s\" (%s)\n",
++ regex_string, protocol);
++ /* pattern is now cached as NULL, so we won't try again. */
++ }
++
++ strcpy(node->regex_string, regex_string);
++ return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++ struct iphdr iphdr_tmp;
++ struct iphdr *iphdr;
++ int offset;
++
++ if (!ip_hdr(skb))
++ return 0;
++
++ offset = ((uintptr_t)ip_hdr(skb)) - ((uintptr_t)skb->data);
++
++ iphdr = skb_header_pointer(skb, offset, sizeof(*iphdr), &iphdr_tmp);
++ if (!iphdr)
++ return 0;
++
++ if (iphdr->protocol == IPPROTO_TCP ||
++ iphdr->protocol == IPPROTO_UDP ||
++ iphdr->protocol == IPPROTO_ICMP)
++ return 1;
++
++ return 0;
++}
++
++static int app_data_offset(const struct sk_buff *skb)
++{
++ int offset;
++ struct iphdr iphdr_tmp;
++ struct iphdr *iphdr;
++ struct tcphdr tcphdr_tmp;
++ struct tcphdr *tcphdr;
++
++ if (!ip_hdr(skb))
++ return -1;
++
++ offset = ((uintptr_t)ip_hdr(skb)) - ((uintptr_t)skb->data);
++
++ iphdr = skb_header_pointer(skb, offset, sizeof(*iphdr), &iphdr_tmp);
++ if (!iphdr)
++ return -1;
++
++ offset += iphdr->ihl * 4;
++
++ if (iphdr->protocol == IPPROTO_TCP) {
++ tcphdr = skb_header_pointer(skb, offset, sizeof(*tcphdr),
++ &tcphdr_tmp);
++ if (!tcphdr)
++ return -1;
++
++ offset += tcphdr->doff * 4;
++
++ return offset;
++ }
++
++ if (iphdr->protocol == IPPROTO_UDP)
++ return offset + 8;
++
++ if (iphdr->protocol == IPPROTO_ICMP)
++ return offset + 8;
++
++ if (net_ratelimit())
++ pr_err(KERN_ERR "layer7: tried to handle unknown protocol!\n");
++
++ return offset + 8; /* something reasonable */
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack,
++ struct nf_conn * master_conntrack,
++ enum ip_conntrack_info ctinfo,
++ enum ip_conntrack_info master_ctinfo,
++ const struct xt_layer7_info * info)
++{
++ /* If we're in here, throw the app data away */
++ if(master_conntrack->layer7.app_data != NULL) {
++
++ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++ if(!master_conntrack->layer7.app_proto) {
++ char * f =
++ friendly_print(master_conntrack->layer7.app_data);
++ char * g =
++ hex_print(master_conntrack->layer7.app_data);
++ DPRINTK("\nl7-filter gave up after %d bytes "
++ "(%d packets):\n%s\n",
++ strlen(f), total_acct_packets(master_conntrack), f);
++ kfree(f);
++ DPRINTK("In hex: %s\n", g);
++ kfree(g);
++ }
++ #endif
++
++ kfree(master_conntrack->layer7.app_data);
++ master_conntrack->layer7.app_data = NULL; /* don't free again */
++ }
++
++ if(master_conntrack->layer7.app_proto){
++ /* Here child connections set their .app_proto (for /proc) */
++ if(!conntrack->layer7.app_proto) {
++ conntrack->layer7.app_proto =
++ kmalloc(strlen(master_conntrack->layer7.app_proto)+1,
++ GFP_ATOMIC);
++ if(!conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory "
++ "in match_no_append, "
++ "bailing.\n");
++ return 1;
++ }
++ strcpy(conntrack->layer7.app_proto,
++ master_conntrack->layer7.app_proto);
++ }
++
++ return (!strcmp(master_conntrack->layer7.app_proto,
++ info->protocol));
++ }
++ else {
++ /* If not classified, set to "unknown" to distinguish from
++ connections that are still being tested. */
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match_no_append, bailing.\n");
++ return 1;
++ }
++ strcpy(master_conntrack->layer7.app_proto, "unknown");
++ return 0;
++ }
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_datastr(char *target, int offset, char *app_data, int len)
++{
++ int length = 0, i;
++ if (!target) return 0;
++
++ /* Strip nulls. Make everything lower case (our regex lib doesn't
++ do case insensitivity). Add it to the end of the current data. */
++ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
++ if(app_data[i] != '\0') {
++ /* the kernel version of tolower mungs 'upper ascii' */
++ target[length+offset] =
++ isascii(app_data[i])?
++ tolower(app_data[i]) : app_data[i];
++ length++;
++ }
++ }
++ target[length+offset] = '\0';
++
++ return length;
++}
++
++/* add the new app data to the buffer. Return number of bytes added. */
++static int add_data(char *target, int offset, const struct sk_buff *skb)
++{
++ int length, length_sum = 0;
++ int data_start = app_data_offset(skb);
++ int remaining = skb->len - data_start;
++ int to_copy;
++ uint8_t buf[512];
++ uint8_t *data;
++
++ while ((offset < maxdatalen - 1) && (remaining > 0)) {
++ to_copy = min_t(int, remaining, sizeof(buf));
++
++ data = skb_header_pointer(skb, data_start, to_copy, buf);
++ length = add_datastr(target, offset, data, to_copy);
++
++ remaining -= to_copy;
++ data_start += to_copy;
++ offset += length;
++ length_sum += length;
++ }
++
++ return length_sum;
++}
++
++/* add the new app data to the conntrack. Return number of bytes added. */
++static int add_data_conntrack(struct nf_conn *master_conntrack,
++ const struct sk_buff *skb)
++{
++ int length;
++
++ length = add_data(master_conntrack->layer7.app_data,
++ master_conntrack->layer7.app_data_len, skb);
++ master_conntrack->layer7.app_data_len += length;
++
++ return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++ int val = 0;
++
++ for (;; s++) {
++ switch (*s) {
++ case '0'...'9':
++ val = 10*val+(*s-'0');
++ break;
++ default:
++ return val;
++ }
++ }
++}
++
++static int layer7_numpackets_proc_show(struct seq_file *s, void *p) {
++ seq_printf(s, "%d\n", num_packets);
++
++ return 0;
++}
++
++static int layer7_numpackets_proc_open(struct inode *inode, struct file *file) {
++ return single_open(file, layer7_numpackets_proc_show, NULL);
++}
++
++/* Read in num_packets from userland */
++static ssize_t layer7_numpackets_write_proc(struct file* file, const char __user *buffer,
++ size_t count, loff_t *data) {
++ char value[1024];
++ int new_num_packets;
++
++ if (copy_from_user(&value, buffer, sizeof(value)))
++ return -EFAULT;
++
++ new_num_packets = my_atoi(value);
++
++ if ((new_num_packets < 1) || (new_num_packets > 99)) {
++ printk(KERN_WARNING "layer7: numpackets must be between 1 and 99\n");
++ return -EFAULT;
++ }
++
++ num_packets = new_num_packets;
++
++ return count;
++}
++
++static bool match(const struct sk_buff *skbin, struct xt_action_param *par)
++{
++ /* sidestep const without getting a compiler warning... */
++ struct sk_buff *skb = (struct sk_buff *)skbin;
++
++ const struct xt_layer7_info * info = par->matchinfo;
++
++ enum ip_conntrack_info master_ctinfo, ctinfo;
++ struct nf_conn *master_conntrack, *conntrack;
++ unsigned char *tmp_data;
++ unsigned int pattern_result;
++ regexp * comppattern;
++
++ /* Be paranoid/incompetent - lock the entire match function. */
++ spin_lock_bh(&l7_lock);
++
++ if (!can_handle(skbin)) {
++ DPRINTK("layer7: This is some protocol I can't handle.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Treat parent & all its children together as one connection, except
++ for the purpose of setting conntrack->layer7.app_proto in the actual
++ connection. This makes /proc/net/ip_conntrack more satisfying. */
++ conntrack = nf_ct_get(skbin, &ctinfo);
++ master_conntrack = nf_ct_get(skbin, &master_ctinfo);
++ if (!conntrack || !master_conntrack) {
++ DPRINTK("layer7: couldn't get conntrack.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ /* Try to get a master conntrack (and its master etc) for FTP, etc. */
++ while (master_ct(master_conntrack) != NULL)
++ master_conntrack = master_ct(master_conntrack);
++
++ /* if we've classified it or seen too many packets */
++ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++ master_conntrack->layer7.app_proto)) {
++
++ pattern_result = match_no_append(conntrack, master_conntrack,
++ ctinfo, master_ctinfo, info);
++
++ /* skb->cb[0] == seen. Don't do things twice if there are
++ multiple l7 rules. I'm not sure that using cb for this purpose
++ is correct, even though it says "put your private variables
++ there". But it doesn't look like it is being used for anything
++ else in the skbs that make it here. */
++ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++
++ /* the return value gets checked later, when we're ready to use it */
++ comppattern = compile_and_cache(info->pattern, info->protocol);
++
++ if (info->pkt) {
++ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!tmp_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++ return info->invert;
++ }
++
++ tmp_data[0] = '\0';
++ add_data(tmp_data, 0, skbin);
++ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++ kfree(tmp_data);
++ tmp_data = NULL;
++ spin_unlock_bh(&l7_lock);
++
++ return (pattern_result ^ info->invert);
++ }
++
++ /* On the first packet of a connection, allocate space for app data */
++ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
++ !master_conntrack->layer7.app_data){
++ master_conntrack->layer7.app_data =
++ kmalloc(maxdatalen, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_data){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++
++ master_conntrack->layer7.app_data[0] = '\0';
++ }
++
++ /* Can be here, but unallocated, if numpackets is increased near
++ the beginning of a connection */
++ if(master_conntrack->layer7.app_data == NULL){
++ spin_unlock_bh(&l7_lock);
++ return info->invert; /* unmatched */
++ }
++
++ if(!skb->cb[0]){
++ int newbytes;
++ newbytes = add_data_conntrack(master_conntrack, skb);
++
++ if(newbytes == 0) { /* didn't add any data */
++ skb->cb[0] = 1;
++ /* Didn't match before, not going to match now */
++ spin_unlock_bh(&l7_lock);
++ return info->invert;
++ }
++ }
++
++ /* If looking for "unknown", then never match. "Unknown" means that
++ we've given up; we're still trying with these packets. */
++ if(!strcmp(info->protocol, "unknown")) {
++ pattern_result = 0;
++ /* If looking for "unset", then always match. "Unset" means that we
++ haven't yet classified the connection. */
++ } else if(!strcmp(info->protocol, "unset")) {
++ pattern_result = 2;
++ DPRINTK("layer7: matched unset: not yet classified "
++ "(%d/%d packets)\n",
++ total_acct_packets(master_conntrack), num_packets);
++ /* If the regexp failed to compile, don't bother running it */
++ } else if(comppattern &&
++ regexec(comppattern, master_conntrack->layer7.app_data)){
++ DPRINTK("layer7: matched %s\n", info->protocol);
++ pattern_result = 1;
++ } else pattern_result = 0;
++
++ if(pattern_result == 1) {
++ master_conntrack->layer7.app_proto =
++ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++ if(!master_conntrack->layer7.app_proto){
++ if (net_ratelimit())
++ printk(KERN_ERR "layer7: out of memory in "
++ "match, bailing.\n");
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++ }
++ strcpy(master_conntrack->layer7.app_proto, info->protocol);
++ } else if(pattern_result > 1) { /* cleanup from "unset" */
++ pattern_result = 1;
++ }
++
++ /* mark the packet seen */
++ skb->cb[0] = 1;
++
++ spin_unlock_bh(&l7_lock);
++ return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++static int check(const struct xt_mtchk_param *par)
++{
++ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++ printk(KERN_WARNING "can't load conntrack support for "
++ "proto=%d\n", par->match->family);
++ return -EINVAL;
++ }
++ return 0;
++}
++
++
++static void destroy(const struct xt_mtdtor_param *par)
++{
++ nf_ct_l3proto_module_put(par->match->family);
++}
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++ .name = "layer7",
++ .family = AF_INET,
++ .checkentry = check,
++ .match = match,
++ .destroy = destroy,
++ .matchsize = sizeof(struct xt_layer7_info),
++ .me = THIS_MODULE
++}
++};
++
++static const struct file_operations layer7_numpackets_proc_fops = {
++ .owner = THIS_MODULE,
++ .open = layer7_numpackets_proc_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++ .write = layer7_numpackets_write_proc,
++};
++
++static int __init xt_layer7_init(void)
++{
++ need_conntrack();
++
++ // Register proc interface
++ proc_create_data("layer7_numpackets", 0644,
++ init_net.proc_net, &layer7_numpackets_proc_fops, NULL);
++
++ if(maxdatalen < 1) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++ "using 1\n");
++ maxdatalen = 1;
++ }
++ /* This is not a hard limit. It's just here to prevent people from
++ bringing their slow machines to a grinding halt. */
++ else if(maxdatalen > 65536) {
++ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++ "using 65536\n");
++ maxdatalen = 65536;
++ }
++ return xt_register_matches(xt_layer7_match,
++ ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++ remove_proc_entry("layer7_numpackets", init_net.proc_net);
++ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/src/patches/linux-3.14.22-dvbsky.patch b/src/patches/linux-3.14.22-dvbsky.patch
new file mode 100644
index 0000000..00180c4
--- /dev/null
+++ b/src/patches/linux-3.14.22-dvbsky.patch
@@ -0,0 +1,6558 @@
+diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
+index dd12a1e..969cd15 100644
+--- a/drivers/media/dvb-frontends/Kconfig
++++ b/drivers/media/dvb-frontends/Kconfig
+@@ -726,6 +726,20 @@ config DVB_TDA665x
+ Currently supported tuners:
+ * Panasonic ENV57H12D5 (ET-50DT)
+
++config DVB_DVBSKY_M88DS3103
++ tristate "Montage M88DS3103 based(DVBSky)"
++ depends on DVB_CORE && I2C
++ default m if !MEDIA_SUBDRV_AUTOSELECT
++ help
++ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
++
++config DVB_M88DC2800
++ tristate "Montage M88DC2800 based"
++ depends on DVB_CORE && I2C
++ default m if !MEDIA_SUBDRV_AUTOSELECT
++ help
++ A DVB-C tuner module. Say Y when you want to support this frontend.
++
+ config DVB_IX2505V
+ tristate "Sharp IX2505V silicon tuner"
+ depends on DVB_CORE && I2C
+diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
+index 0c75a6a..37c57f9 100644
+--- a/drivers/media/dvb-frontends/Makefile
++++ b/drivers/media/dvb-frontends/Makefile
+@@ -106,3 +106,5 @@ obj-$(CONFIG_DVB_RTL2832) += rtl2832.o
+ obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o
+ obj-$(CONFIG_DVB_AF9033) += af9033.o
+
++obj-$(CONFIG_DVB_DVBSKY_M88DS3103) += dvbsky_m88ds3103.o
++obj-$(CONFIG_DVB_M88DC2800) += m88dc2800.o
+diff --git a/drivers/media/dvb-frontends/dvbsky_m88ds3103.c b/drivers/media/dvb-frontends/dvbsky_m88ds3103.c
+new file mode 100644
+index 0000000..5ad1157
+--- /dev/null
++++ b/drivers/media/dvb-frontends/dvbsky_m88ds3103.c
+@@ -0,0 +1,1723 @@
++/*
++ Montage Technology M88DS3103/M88TS2022 - DVBS/S2 Satellite demod/tuner driver
++
++ Copyright (C) 2011 Max nibble<nibble.max(a)gmail.com>
++ Copyright (C) 2010 Montage Technology<www.montage-tech.com>
++ Copyright (C) 2009 Konstantin Dimitrov.
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/slab.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/firmware.h>
++
++#include "dvb_frontend.h"
++#include "dvbsky_m88ds3103.h"
++#include "dvbsky_m88ds3103_priv.h"
++
++static int debug;
++module_param(debug, int, 0644);
++MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
++
++#define dprintk(args...) \
++ do { \
++ if (debug) \
++ printk(KERN_INFO "m88ds3103: " args); \
++ } while (0)
++
++#define _AUTO_S2_
++
++/*demod register operations.*/
++static int m88ds3103_writereg(struct m88ds3103_state *state, int reg, int data)
++{
++ u8 buf[] = { reg, data };
++ struct i2c_msg msg = { .addr = state->config->demod_address,
++ .flags = 0, .buf = buf, .len = 2 };
++ int err;
++
++ if (debug > 1)
++ printk("m88ds3103: %s: write reg 0x%02x, value 0x%02x\n",
++ __func__, reg, data);
++
++ err = i2c_transfer(state->i2c, &msg, 1);
++ if (err != 1) {
++ printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
++ " value == 0x%02x)\n", __func__, err, reg, data);
++ return -EREMOTEIO;
++ }
++ return 0;
++}
++
++static int m88ds3103_readreg(struct m88ds3103_state *state, u8 reg)
++{
++ int ret;
++ u8 b0[] = { reg };
++ u8 b1[] = { 0 };
++ struct i2c_msg msg[] = {
++ { .addr = state->config->demod_address, .flags = 0,
++ .buf = b0, .len = 1 },
++ { .addr = state->config->demod_address, .flags = I2C_M_RD,
++ .buf = b1, .len = 1 }
++ };
++ ret = i2c_transfer(state->i2c, msg, 2);
++
++ if (ret != 2) {
++ printk(KERN_ERR "%s: reg=0x%x (error=%d)\n",
++ __func__, reg, ret);
++ return ret;
++ }
++
++ if (debug > 1)
++ printk(KERN_INFO "m88ds3103: read reg 0x%02x, value 0x%02x\n",
++ reg, b1[0]);
++
++ return b1[0];
++}
++
++/*tuner register operations.*/
++static int m88ds3103_tuner_writereg(struct m88ds3103_state *state, int reg, int data)
++{
++ u8 buf[] = { reg, data };
++ struct i2c_msg msg = { .addr = 0x60,
++ .flags = 0, .buf = buf, .len = 2 };
++ int err;
++
++ m88ds3103_writereg(state, 0x03, 0x11);
++ err = i2c_transfer(state->i2c, &msg, 1);
++
++ if (err != 1) {
++ printk("%s: writereg error(err == %i, reg == 0x%02x,"
++ " value == 0x%02x)\n", __func__, err, reg, data);
++ return -EREMOTEIO;
++ }
++
++ return 0;
++}
++
++static int m88ds3103_tuner_readreg(struct m88ds3103_state *state, u8 reg)
++{
++ int ret;
++ u8 b0[] = { reg };
++ u8 b1[] = { 0 };
++ struct i2c_msg msg[] = {
++ { .addr = 0x60, .flags = 0,
++ .buf = b0, .len = 1 },
++ { .addr = 0x60, .flags = I2C_M_RD,
++ .buf = b1, .len = 1 }
++ };
++
++ m88ds3103_writereg(state, 0x03, (0x11 + state->config->tuner_readstops));
++ ret = i2c_transfer(state->i2c, msg, 2);
++
++ if (ret != 2) {
++ printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
++ return ret;
++ }
++
++ return b1[0];
++}
++
++/* Bulk demod I2C write, for firmware download. */
++static int m88ds3103_writeregN(struct m88ds3103_state *state, int reg,
++ const u8 *data, u16 len)
++{
++ int ret = -EREMOTEIO;
++ struct i2c_msg msg;
++ u8 *buf;
++
++ buf = kmalloc(len + 1, GFP_KERNEL);
++ if (buf == NULL) {
++ printk("Unable to kmalloc\n");
++ ret = -ENOMEM;
++ goto error;
++ }
++
++ *(buf) = reg;
++ memcpy(buf + 1, data, len);
++
++ msg.addr = state->config->demod_address;
++ msg.flags = 0;
++ msg.buf = buf;
++ msg.len = len + 1;
++
++ if (debug > 1)
++ printk(KERN_INFO "m88ds3103: %s: write regN 0x%02x, len = %d\n",
++ __func__, reg, len);
++
++ ret = i2c_transfer(state->i2c, &msg, 1);
++ if (ret != 1) {
++ printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n",
++ __func__, ret, reg);
++ ret = -EREMOTEIO;
++ }
++
++error:
++ kfree(buf);
++
++ return ret;
++}
++
++static int m88ds3103_load_firmware(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ const struct firmware *fw;
++ int i, ret = 0;
++
++ dprintk("%s()\n", __func__);
++
++ if (state->skip_fw_load)
++ return 0;
++ /* Load firmware */
++ /* request the firmware, this will block until someone uploads it */
++ if(state->demod_id == DS3000_ID){
++ printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
++ DS3000_DEFAULT_FIRMWARE);
++ ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE,
++ state->i2c->dev.parent);
++ }else if(state->demod_id == DS3103_ID){
++ printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
++ DS3103_DEFAULT_FIRMWARE);
++ ret = request_firmware(&fw, DS3103_DEFAULT_FIRMWARE,
++ state->i2c->dev.parent);
++ }
++
++ printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
++ if (ret) {
++ printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
++ "found?)\n", __func__);
++ return ret;
++ }
++
++ /* Make sure we don't recurse back through here during loading */
++ state->skip_fw_load = 1;
++
++ dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
++ fw->size,
++ fw->data[0],
++ fw->data[1],
++ fw->data[fw->size - 2],
++ fw->data[fw->size - 1]);
++
++ /* stop internal mcu. */
++ m88ds3103_writereg(state, 0xb2, 0x01);
++ /* split firmware to download.*/
++ for(i = 0; i < FW_DOWN_LOOP; i++){
++ ret = m88ds3103_writeregN(state, 0xb0, &(fw->data[FW_DOWN_SIZE*i]), FW_DOWN_SIZE);
++ if(ret != 1) break;
++ }
++ /* start internal mcu. */
++ if(ret == 1)
++ m88ds3103_writereg(state, 0xb2, 0x00);
++
++ release_firmware(fw);
++
++ dprintk("%s: Firmware upload %s\n", __func__,
++ ret == 1 ? "complete" : "failed");
++
++ if(ret == 1) ret = 0;
++
++ /* Ensure firmware is always loaded if required */
++ state->skip_fw_load = 0;
++
++ return ret;
++}
++
++
++static int m88ds3103_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 data;
++
++ dprintk("%s(%d)\n", __func__, voltage);
++
++ dprintk("m88ds3103:pin_ctrl = (%02x)\n", state->config->pin_ctrl);
++
++ if(state->config->set_voltage)
++ state->config->set_voltage(fe, voltage);
++
++ data = m88ds3103_readreg(state, 0xa2);
++
++ if(state->config->pin_ctrl & 0x80){ /*If control pin is assigned.*/
++ data &= ~0x03; /* bit0 V/H, bit1 off/on */
++ if(state->config->pin_ctrl & 0x02)
++ data |= 0x02;
++
++ switch (voltage) {
++ case SEC_VOLTAGE_18:
++ if((state->config->pin_ctrl & 0x01) == 0)
++ data |= 0x01;
++ break;
++ case SEC_VOLTAGE_13:
++ if(state->config->pin_ctrl & 0x01)
++ data |= 0x01;
++ break;
++ case SEC_VOLTAGE_OFF:
++ if(state->config->pin_ctrl & 0x02)
++ data &= ~0x02;
++ else
++ data |= 0x02;
++ break;
++ }
++ }
++
++ m88ds3103_writereg(state, 0xa2, data);
++
++ return 0;
++}
++
++static int m88ds3103_read_status(struct dvb_frontend *fe, fe_status_t* status)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ int lock = 0;
++
++ *status = 0;
++
++ switch (state->delivery_system){
++ case SYS_DVBS:
++ lock = m88ds3103_readreg(state, 0xd1);
++ dprintk("%s: SYS_DVBS status=%x.\n", __func__, lock);
++
++ if ((lock & 0x07) == 0x07){
++ /*if((m88ds3103_readreg(state, 0x0d) & 0x07) == 0x07)*/
++ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER
++ | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
++
++ }
++ break;
++ case SYS_DVBS2:
++ lock = m88ds3103_readreg(state, 0x0d);
++ dprintk("%s: SYS_DVBS2 status=%x.\n", __func__, lock);
++
++ if ((lock & 0x8f) == 0x8f)
++ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER
++ | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
++
++ break;
++ default:
++ break;
++ }
++
++ return 0;
++}
++
++static int m88ds3103_read_ber(struct dvb_frontend *fe, u32* ber)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 tmp1, tmp2, tmp3;
++ u32 ldpc_frame_cnt, pre_err_packags, code_rate_fac = 0;
++
++ dprintk("%s()\n", __func__);
++
++ switch (state->delivery_system) {
++ case SYS_DVBS:
++ m88ds3103_writereg(state, 0xf9, 0x04);
++ tmp3 = m88ds3103_readreg(state, 0xf8);
++ if ((tmp3&0x10) == 0){
++ tmp1 = m88ds3103_readreg(state, 0xf7);
++ tmp2 = m88ds3103_readreg(state, 0xf6);
++ tmp3 |= 0x10;
++ m88ds3103_writereg(state, 0xf8, tmp3);
++ state->preBer = (tmp1<<8) | tmp2;
++ }
++ break;
++ case SYS_DVBS2:
++ tmp1 = m88ds3103_readreg(state, 0x7e) & 0x0f;
++ switch(tmp1){
++ case 0: code_rate_fac = 16008 - 80; break;
++ case 1: code_rate_fac = 21408 - 80; break;
++ case 2: code_rate_fac = 25728 - 80; break;
++ case 3: code_rate_fac = 32208 - 80; break;
++ case 4: code_rate_fac = 38688 - 80; break;
++ case 5: code_rate_fac = 43040 - 80; break;
++ case 6: code_rate_fac = 48408 - 80; break;
++ case 7: code_rate_fac = 51648 - 80; break;
++ case 8: code_rate_fac = 53840 - 80; break;
++ case 9: code_rate_fac = 57472 - 80; break;
++ case 10: code_rate_fac = 58192 - 80; break;
++ }
++
++ tmp1 = m88ds3103_readreg(state, 0xd7) & 0xff;
++ tmp2 = m88ds3103_readreg(state, 0xd6) & 0xff;
++ tmp3 = m88ds3103_readreg(state, 0xd5) & 0xff;
++ ldpc_frame_cnt = (tmp1 << 16) | (tmp2 << 8) | tmp3;
++
++ tmp1 = m88ds3103_readreg(state, 0xf8) & 0xff;
++ tmp2 = m88ds3103_readreg(state, 0xf7) & 0xff;
++ pre_err_packags = tmp1<<8 | tmp2;
++
++ if (ldpc_frame_cnt > 1000){
++ m88ds3103_writereg(state, 0xd1, 0x01);
++ m88ds3103_writereg(state, 0xf9, 0x01);
++ m88ds3103_writereg(state, 0xf9, 0x00);
++ m88ds3103_writereg(state, 0xd1, 0x00);
++ state->preBer = pre_err_packags;
++ }
++ break;
++ default:
++ break;
++ }
++ *ber = state->preBer;
++
++ return 0;
++}
++
++static int m88ds3103_read_signal_strength(struct dvb_frontend *fe,
++ u16 *signal_strength)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u16 gain;
++ u8 gain1, gain2, gain3 = 0;
++
++ dprintk("%s()\n", __func__);
++
++ gain1 = m88ds3103_tuner_readreg(state, 0x3d) & 0x1f;
++ dprintk("%s: gain1 = 0x%02x \n", __func__, gain1);
++
++ if (gain1 > 15) gain1 = 15;
++ gain2 = m88ds3103_tuner_readreg(state, 0x21) & 0x1f;
++ dprintk("%s: gain2 = 0x%02x \n", __func__, gain2);
++
++ if(state->tuner_id == TS2022_ID){
++ gain3 = (m88ds3103_tuner_readreg(state, 0x66)>>3) & 0x07;
++ dprintk("%s: gain3 = 0x%02x \n", __func__, gain3);
++
++ if (gain2 > 16) gain2 = 16;
++ if (gain2 < 2) gain2 = 2;
++ if (gain3 > 6) gain3 = 6;
++ }else{
++ if (gain2 > 13) gain2 = 13;
++ gain3 = 0;
++ }
++
++ gain = gain1*23 + gain2*35 + gain3*29;
++ *signal_strength = 60000 - gain*55;
++
++ return 0;
++}
++
++
++static int m88ds3103_read_snr(struct dvb_frontend *fe, u16 *p_snr)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 val, npow1, npow2, spow1, cnt;
++ u16 tmp, snr;
++ u32 npow, spow, snr_total;
++ static const u16 mes_log10[] ={
++ 0, 3010, 4771, 6021, 6990, 7781, 8451, 9031, 9542, 10000,
++ 10414, 10792, 11139, 11461, 11761, 12041, 12304, 12553, 12788, 13010,
++ 13222, 13424, 13617, 13802, 13979, 14150, 14314, 14472, 14624, 14771,
++ 14914, 15052, 15185, 15315, 15441, 15563, 15682, 15798, 15911, 16021,
++ 16128, 16232, 16335, 16435, 16532, 16628, 16721, 16812, 16902, 16990,
++ 17076, 17160, 17243, 17324, 17404, 17482, 17559, 17634, 17709, 17782,
++ 17853, 17924, 17993, 18062, 18129, 18195, 18261, 18325, 18388, 18451,
++ 18513, 18573, 18633, 18692, 18751, 18808, 18865, 18921, 18976, 19031
++ };
++ static const u16 mes_loge[] ={
++ 0, 6931, 10986, 13863, 16094, 17918, 19459, 20794, 21972, 23026,
++ 23979, 24849, 25649, 26391, 27081, 27726, 28332, 28904, 29444, 29957,
++ 30445, 30910, 31355, 31781, 32189, 32581, 32958, 33322, 33673, 34012,
++ 34340, 34657,
++ };
++
++ dprintk("%s()\n", __func__);
++
++ snr = 0;
++
++ switch (state->delivery_system){
++ case SYS_DVBS:
++ cnt = 10; snr_total = 0;
++ while(cnt > 0){
++ val = m88ds3103_readreg(state, 0xff);
++ snr_total += val;
++ cnt--;
++ }
++ tmp = (u16)(snr_total/80);
++ if(tmp > 0){
++ if (tmp > 32) tmp = 32;
++ snr = (mes_loge[tmp - 1] * 100) / 45;
++ }else{
++ snr = 0;
++ }
++ break;
++ case SYS_DVBS2:
++ cnt = 10; npow = 0; spow = 0;
++ while(cnt >0){
++ npow1 = m88ds3103_readreg(state, 0x8c) & 0xff;
++ npow2 = m88ds3103_readreg(state, 0x8d) & 0xff;
++ npow += (((npow1 & 0x3f) + (u16)(npow2 << 6)) >> 2);
++
++ spow1 = m88ds3103_readreg(state, 0x8e) & 0xff;
++ spow += ((spow1 * spow1) >> 1);
++ cnt--;
++ }
++ npow /= 10; spow /= 10;
++ if(spow == 0){
++ snr = 0;
++ }else if(npow == 0){
++ snr = 19;
++ }else{
++ if(spow > npow){
++ tmp = (u16)(spow / npow);
++ if (tmp > 80) tmp = 80;
++ snr = mes_log10[tmp - 1]*3;
++ }else{
++ tmp = (u16)(npow / spow);
++ if (tmp > 80) tmp = 80;
++ snr = -(mes_log10[tmp - 1] / 1000);
++ }
++ }
++ break;
++ default:
++ break;
++ }
++ *p_snr = snr;
++
++ return 0;
++}
++
++
++static int m88ds3103_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 tmp1, tmp2, tmp3, data;
++
++ dprintk("%s()\n", __func__);
++
++ switch (state->delivery_system) {
++ case SYS_DVBS:
++ data = m88ds3103_readreg(state, 0xf8);
++ data |= 0x40;
++ m88ds3103_writereg(state, 0xf8, data);
++ tmp1 = m88ds3103_readreg(state, 0xf5);
++ tmp2 = m88ds3103_readreg(state, 0xf4);
++ *ucblocks = (tmp1 <<8) | tmp2;
++ data &= ~0x20;
++ m88ds3103_writereg(state, 0xf8, data);
++ data |= 0x20;
++ m88ds3103_writereg(state, 0xf8, data);
++ data &= ~0x40;
++ m88ds3103_writereg(state, 0xf8, data);
++ break;
++ case SYS_DVBS2:
++ tmp1 = m88ds3103_readreg(state, 0xda);
++ tmp2 = m88ds3103_readreg(state, 0xd9);
++ tmp3 = m88ds3103_readreg(state, 0xd8);
++ *ucblocks = (tmp1 <<16)|(tmp2 <<8)|tmp3;
++ data = m88ds3103_readreg(state, 0xd1);
++ data |= 0x01;
++ m88ds3103_writereg(state, 0xd1, data);
++ data &= ~0x01;
++ m88ds3103_writereg(state, 0xd1, data);
++ break;
++ default:
++ break;
++ }
++ return 0;
++}
++
++static int m88ds3103_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 data_a1, data_a2;
++
++ dprintk("%s(%d)\n", __func__, tone);
++ if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
++ printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
++ return -EINVAL;
++ }
++
++ data_a1 = m88ds3103_readreg(state, 0xa1);
++ data_a2 = m88ds3103_readreg(state, 0xa2);
++ if(state->demod_id == DS3103_ID)
++ data_a2 &= 0xdf; /* Normal mode */
++ switch (tone) {
++ case SEC_TONE_ON:
++ dprintk("%s: SEC_TONE_ON\n", __func__);
++ data_a1 |= 0x04;
++ data_a1 &= ~0x03;
++ data_a1 &= ~0x40;
++ data_a2 &= ~0xc0;
++ break;
++ case SEC_TONE_OFF:
++ dprintk("%s: SEC_TONE_OFF\n", __func__);
++ data_a2 &= ~0xc0;
++ data_a2 |= 0x80;
++ break;
++ }
++ m88ds3103_writereg(state, 0xa2, data_a2);
++ m88ds3103_writereg(state, 0xa1, data_a1);
++ return 0;
++}
++
++static int m88ds3103_send_diseqc_msg(struct dvb_frontend *fe,
++ struct dvb_diseqc_master_cmd *d)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ int i, ret = 0;
++ u8 tmp, time_out;
++
++ /* Dump DiSEqC message */
++ if (debug) {
++ printk(KERN_INFO "m88ds3103: %s(", __func__);
++ for (i = 0 ; i < d->msg_len ;) {
++ printk(KERN_INFO "0x%02x", d->msg[i]);
++ if (++i < d->msg_len)
++ printk(KERN_INFO ", ");
++ }
++ }
++
++ tmp = m88ds3103_readreg(state, 0xa2);
++ tmp &= ~0xc0;
++ if(state->demod_id == DS3103_ID)
++ tmp &= ~0x20;
++ m88ds3103_writereg(state, 0xa2, tmp);
++
++ for (i = 0; i < d->msg_len; i ++)
++ m88ds3103_writereg(state, (0xa3+i), d->msg[i]);
++
++ tmp = m88ds3103_readreg(state, 0xa1);
++ tmp &= ~0x38;
++ tmp &= ~0x40;
++ tmp |= ((d->msg_len-1) << 3) | 0x07;
++ tmp &= ~0x80;
++ m88ds3103_writereg(state, 0xa1, tmp);
++ /* 1.5 * 9 * 8 = 108ms */
++ time_out = 150;
++ while (time_out > 0){
++ msleep(10);
++ time_out -= 10;
++ tmp = m88ds3103_readreg(state, 0xa1);
++ if ((tmp & 0x40) == 0)
++ break;
++ }
++ if (time_out == 0){
++ tmp = m88ds3103_readreg(state, 0xa1);
++ tmp &= ~0x80;
++ tmp |= 0x40;
++ m88ds3103_writereg(state, 0xa1, tmp);
++ ret = 1;
++ }
++ tmp = m88ds3103_readreg(state, 0xa2);
++ tmp &= ~0xc0;
++ tmp |= 0x80;
++ m88ds3103_writereg(state, 0xa2, tmp);
++ return ret;
++}
++
++
++static int m88ds3103_diseqc_send_burst(struct dvb_frontend *fe,
++ fe_sec_mini_cmd_t burst)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 val, time_out;
++
++ dprintk("%s()\n", __func__);
++
++ val = m88ds3103_readreg(state, 0xa2);
++ val &= ~0xc0;
++ if(state->demod_id == DS3103_ID)
++ val &= 0xdf; /* Normal mode */
++ m88ds3103_writereg(state, 0xa2, val);
++ /* DiSEqC burst */
++ if (burst == SEC_MINI_B)
++ m88ds3103_writereg(state, 0xa1, 0x01);
++ else
++ m88ds3103_writereg(state, 0xa1, 0x02);
++
++ msleep(13);
++
++ time_out = 5;
++ do{
++ val = m88ds3103_readreg(state, 0xa1);
++ if ((val & 0x40) == 0)
++ break;
++ msleep(1);
++ time_out --;
++ } while (time_out > 0);
++
++ val = m88ds3103_readreg(state, 0xa2);
++ val &= ~0xc0;
++ val |= 0x80;
++ m88ds3103_writereg(state, 0xa2, val);
++
++ return 0;
++}
++
++static void m88ds3103_release(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++
++ dprintk("%s\n", __func__);
++ kfree(state);
++}
++
++static int m88ds3103_check_id(struct m88ds3103_state *state)
++{
++ int val_00, val_01;
++
++ /*check demod id*/
++ val_01 = m88ds3103_readreg(state, 0x01);
++ printk(KERN_INFO "DS3000 chip version: %x attached.\n", val_01);
++
++ if(val_01 == 0xD0)
++ state->demod_id = DS3103_ID;
++ else if(val_01 == 0xC0)
++ state->demod_id = DS3000_ID;
++ else
++ state->demod_id = UNKNOW_ID;
++
++ /*check tuner id*/
++ val_00 = m88ds3103_tuner_readreg(state, 0x00);
++ printk(KERN_INFO "TS202x chip version[1]: %x attached.\n", val_00);
++ val_00 &= 0x03;
++ if(val_00 == 0)
++ {
++ m88ds3103_tuner_writereg(state, 0x00, 0x01);
++ msleep(3);
++ }
++ m88ds3103_tuner_writereg(state, 0x00, 0x03);
++ msleep(5);
++
++ val_00 = m88ds3103_tuner_readreg(state, 0x00);
++ printk(KERN_INFO "TS202x chip version[2]: %x attached.\n", val_00);
++ val_00 &= 0xff;
++ if((val_00 == 0x01) || (val_00 == 0x41) || (val_00 == 0x81))
++ state->tuner_id = TS2020_ID;
++ else if(((val_00 & 0xc0)== 0xc0) || (val_00 == 0x83))
++ state->tuner_id = TS2022_ID;
++ else
++ state->tuner_id = UNKNOW_ID;
++
++ return state->demod_id;
++}
++
++static struct dvb_frontend_ops m88ds3103_ops;
++static int m88ds3103_initilaze(struct dvb_frontend *fe);
++
++struct dvb_frontend *dvbsky_m88ds3103_attach(const struct dvbsky_m88ds3103_config *config,
++ struct i2c_adapter *i2c)
++{
++ struct m88ds3103_state *state = NULL;
++
++ dprintk("%s\n", __func__);
++
++ /* allocate memory for the internal state */
++ state = kzalloc(sizeof(struct m88ds3103_state), GFP_KERNEL);
++ if (state == NULL) {
++ printk(KERN_ERR "Unable to kmalloc\n");
++ goto error2;
++ }
++
++ state->config = config;
++ state->i2c = i2c;
++ state->preBer = 0xffff;
++ state->delivery_system = SYS_DVBS; /*Default to DVB-S.*/
++
++ /* check demod id */
++ if(m88ds3103_check_id(state) == UNKNOW_ID){
++ printk(KERN_ERR "Unable to find Montage chip\n");
++ goto error3;
++ }
++
++ memcpy(&state->frontend.ops, &m88ds3103_ops,
++ sizeof(struct dvb_frontend_ops));
++ state->frontend.demodulator_priv = state;
++
++ m88ds3103_initilaze(&state->frontend);
++
++ return &state->frontend;
++
++error3:
++ kfree(state);
++error2:
++ return NULL;
++}
++EXPORT_SYMBOL(dvbsky_m88ds3103_attach);
++
++static int m88ds3103_set_carrier_offset(struct dvb_frontend *fe,
++ s32 carrier_offset_khz)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ s32 tmp;
++
++ tmp = carrier_offset_khz;
++ tmp *= 65536;
++
++ tmp = (2*tmp + MT_FE_MCLK_KHZ) / (2*MT_FE_MCLK_KHZ);
++
++ if (tmp < 0)
++ tmp += 65536;
++
++ m88ds3103_writereg(state, 0x5f, tmp >> 8);
++ m88ds3103_writereg(state, 0x5e, tmp & 0xff);
++
++ return 0;
++}
++
++static int m88ds3103_set_symrate(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
++ u16 value;
++
++ value = (((c->symbol_rate / 1000) << 15) + (MT_FE_MCLK_KHZ / 4)) / (MT_FE_MCLK_KHZ / 2);
++ m88ds3103_writereg(state, 0x61, value & 0x00ff);
++ m88ds3103_writereg(state, 0x62, (value & 0xff00) >> 8);
++
++ return 0;
++}
++
++static int m88ds3103_set_CCI(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 tmp;
++
++ tmp = m88ds3103_readreg(state, 0x56);
++ tmp &= ~0x01;
++ m88ds3103_writereg(state, 0x56, tmp);
++
++ tmp = m88ds3103_readreg(state, 0x76);
++ tmp &= ~0x80;
++ m88ds3103_writereg(state, 0x76, tmp);
++
++ return 0;
++}
++
++static int m88ds3103_init_reg(struct m88ds3103_state *state, const u8 *p_reg_tab, u32 size)
++{
++ u32 i;
++
++ for(i = 0; i < size; i+=2)
++ m88ds3103_writereg(state, p_reg_tab[i], p_reg_tab[i+1]);
++
++ return 0;
++}
++
++static int m88ds3103_get_locked_sym_rate(struct m88ds3103_state *state, u32 *sym_rate_KSs)
++{
++ u16 tmp;
++ u32 sym_rate_tmp;
++ u8 val_0x6d, val_0x6e;
++
++ val_0x6d = m88ds3103_readreg(state, 0x6d);
++ val_0x6e = m88ds3103_readreg(state, 0x6e);
++
++ tmp = (u16)((val_0x6e<<8) | val_0x6d);
++
++ sym_rate_tmp = (u32)(tmp * MT_FE_MCLK_KHZ);
++ sym_rate_tmp = (u32)(sym_rate_tmp / (1<<16));
++ *sym_rate_KSs = sym_rate_tmp;
++
++ return 0;
++}
++
++static int m88ds3103_get_channel_info(struct m88ds3103_state *state, u8 *p_mode, u8 *p_coderate)
++{
++ u8 tmp, val_0x7E;
++
++ if(state->delivery_system == SYS_DVBS2){
++ val_0x7E = m88ds3103_readreg(state, 0x7e);
++ tmp = (u8)((val_0x7E&0xC0) >> 6);
++ *p_mode = tmp;
++ tmp = (u8)(val_0x7E & 0x0f);
++ *p_coderate = tmp;
++ } else {
++ *p_mode = 0;
++ tmp = m88ds3103_readreg(state, 0xe6);
++ tmp = (u8)(tmp >> 5);
++ *p_coderate = tmp;
++ }
++
++ return 0;
++}
++
++static int m88ds3103_set_clock_ratio(struct m88ds3103_state *state)
++{
++ u8 val, mod_fac, tmp1, tmp2;
++ u32 input_datarate, locked_sym_rate_KSs;
++ u32 MClk_KHz = 96000;
++ u8 mod_mode, code_rate, divid_ratio = 0;
++
++ locked_sym_rate_KSs = 0;
++ m88ds3103_get_locked_sym_rate(state, &locked_sym_rate_KSs);
++ if(locked_sym_rate_KSs == 0)
++ return 0;
++
++ m88ds3103_get_channel_info(state, &mod_mode, &code_rate);
++
++ if (state->delivery_system == SYS_DVBS2)
++ {
++ switch(mod_mode) {
++ case 1: mod_fac = 3; break;
++ case 2: mod_fac = 4; break;
++ case 3: mod_fac = 5; break;
++ default: mod_fac = 2; break;
++ }
++
++ switch(code_rate) {
++ case 0: input_datarate = locked_sym_rate_KSs*mod_fac/8/4; break;
++ case 1: input_datarate = locked_sym_rate_KSs*mod_fac/8/3; break;
++ case 2: input_datarate = locked_sym_rate_KSs*mod_fac*2/8/5; break;
++ case 3: input_datarate = locked_sym_rate_KSs*mod_fac/8/2; break;
++ case 4: input_datarate = locked_sym_rate_KSs*mod_fac*3/8/5; break;
++ case 5: input_datarate = locked_sym_rate_KSs*mod_fac*2/8/3; break;
++ case 6: input_datarate = locked_sym_rate_KSs*mod_fac*3/8/4; break;
++ case 7: input_datarate = locked_sym_rate_KSs*mod_fac*4/8/5; break;
++ case 8: input_datarate = locked_sym_rate_KSs*mod_fac*5/8/6; break;
++ case 9: input_datarate = locked_sym_rate_KSs*mod_fac*8/8/9; break;
++ case 10: input_datarate = locked_sym_rate_KSs*mod_fac*9/8/10; break;
++ default: input_datarate = locked_sym_rate_KSs*mod_fac*2/8/3; break;
++ }
++
++ if(state->demod_id == DS3000_ID)
++ input_datarate = input_datarate * 115 / 100;
++
++ if(input_datarate < 4800) {tmp1 = 15;tmp2 = 15;} //4.8MHz TS clock
++ else if(input_datarate < 4966) {tmp1 = 14;tmp2 = 15;} //4.966MHz TS clock
++ else if(input_datarate < 5143) {tmp1 = 14;tmp2 = 14;} //5.143MHz TS clock
++ else if(input_datarate < 5333) {tmp1 = 13;tmp2 = 14;} //5.333MHz TS clock
++ else if(input_datarate < 5538) {tmp1 = 13;tmp2 = 13;} //5.538MHz TS clock
++ else if(input_datarate < 5760) {tmp1 = 12;tmp2 = 13;} //5.76MHz TS clock allan 0809
++ else if(input_datarate < 6000) {tmp1 = 12;tmp2 = 12;} //6MHz TS clock
++ else if(input_datarate < 6260) {tmp1 = 11;tmp2 = 12;} //6.26MHz TS clock
++ else if(input_datarate < 6545) {tmp1 = 11;tmp2 = 11;} //6.545MHz TS clock
++ else if(input_datarate < 6857) {tmp1 = 10;tmp2 = 11;} //6.857MHz TS clock
++ else if(input_datarate < 7200) {tmp1 = 10;tmp2 = 10;} //7.2MHz TS clock
++ else if(input_datarate < 7578) {tmp1 = 9;tmp2 = 10;} //7.578MHz TS clock
++ else if(input_datarate < 8000) {tmp1 = 9;tmp2 = 9;} //8MHz TS clock
++ else if(input_datarate < 8470) {tmp1 = 8;tmp2 = 9;} //8.47MHz TS clock
++ else if(input_datarate < 9000) {tmp1 = 8;tmp2 = 8;} //9MHz TS clock
++ else if(input_datarate < 9600) {tmp1 = 7;tmp2 = 8;} //9.6MHz TS clock
++ else if(input_datarate < 10285) {tmp1 = 7;tmp2 = 7;} //10.285MHz TS clock
++ else if(input_datarate < 12000) {tmp1 = 6;tmp2 = 6;} //12MHz TS clock
++ else if(input_datarate < 14400) {tmp1 = 5;tmp2 = 5;} //14.4MHz TS clock
++ else if(input_datarate < 18000) {tmp1 = 4;tmp2 = 4;} //18MHz TS clock
++ else {tmp1 = 3;tmp2 = 3;} //24MHz TS clock
++
++ if(state->demod_id == DS3000_ID) {
++ val = (u8)((tmp1<<4) + tmp2);
++ m88ds3103_writereg(state, 0xfe, val);
++ } else {
++ tmp1 = m88ds3103_readreg(state, 0x22);
++ tmp2 = m88ds3103_readreg(state, 0x24);
++
++ tmp1 >>= 6;
++ tmp1 &= 0x03;
++ tmp2 >>= 6;
++ tmp2 &= 0x03;
++
++ if((tmp1 == 0x00) && (tmp2 == 0x01))
++ MClk_KHz = 144000;
++ else if((tmp1 == 0x00) && (tmp2 == 0x03))
++ MClk_KHz = 72000;
++ else if((tmp1 == 0x01) && (tmp2 == 0x01))
++ MClk_KHz = 115200;
++ else if((tmp1 == 0x02) && (tmp2 == 0x01))
++ MClk_KHz = 96000;
++ else if((tmp1 == 0x03) && (tmp2 == 0x00))
++ MClk_KHz = 192000;
++ else
++ return 0;
++
++ if(input_datarate < 5200) /*Max. 2011-12-23 11:55*/
++ input_datarate = 5200;
++
++ if(input_datarate != 0)
++ divid_ratio = (u8)(MClk_KHz / input_datarate);
++ else
++ divid_ratio = 0xFF;
++
++ if(divid_ratio > 128)
++ divid_ratio = 128;
++
++ if(divid_ratio < 2)
++ divid_ratio = 2;
++
++ tmp1 = (u8)(divid_ratio / 2);
++ tmp2 = (u8)(divid_ratio / 2);
++
++ if((divid_ratio % 2) != 0)
++ tmp2 += 1;
++
++ tmp1 -= 1;
++ tmp2 -= 1;
++
++ tmp1 &= 0x3f;
++ tmp2 &= 0x3f;
++
++ val = m88ds3103_readreg(state, 0xfe);
++ val &= 0xF0;
++ val |= (tmp2 >> 2) & 0x0f;
++ m88ds3103_writereg(state, 0xfe, val);
++
++ val = (u8)((tmp2 & 0x03) << 6);
++ val |= tmp1;
++ m88ds3103_writereg(state, 0xea, val);
++ }
++ } else {
++ mod_fac = 2;
++
++ switch(code_rate) {
++ case 4: input_datarate = locked_sym_rate_KSs*mod_fac/2/8; break;
++ case 3: input_datarate = locked_sym_rate_KSs*mod_fac*2/3/8; break;
++ case 2: input_datarate = locked_sym_rate_KSs*mod_fac*3/4/8; break;
++ case 1: input_datarate = locked_sym_rate_KSs*mod_fac*5/6/8; break;
++ case 0: input_datarate = locked_sym_rate_KSs*mod_fac*7/8/8; break;
++ default: input_datarate = locked_sym_rate_KSs*mod_fac*3/4/8; break;
++ }
++
++ if(state->demod_id == DS3000_ID)
++ input_datarate = input_datarate * 115 / 100;
++
++ if(input_datarate < 6857) {tmp1 = 7;tmp2 = 7;} //6.857MHz TS clock
++ else if(input_datarate < 7384) {tmp1 = 6;tmp2 = 7;} //7.384MHz TS clock
++ else if(input_datarate < 8000) {tmp1 = 6;tmp2 = 6;} //8MHz TS clock
++ else if(input_datarate < 8727) {tmp1 = 5;tmp2 = 6;} //8.727MHz TS clock
++ else if(input_datarate < 9600) {tmp1 = 5;tmp2 = 5;} //9.6MHz TS clock
++ else if(input_datarate < 10666) {tmp1 = 4;tmp2 = 5;} //10.666MHz TS clock
++ else if(input_datarate < 12000) {tmp1 = 4;tmp2 = 4;} //12MHz TS clock
++ else if(input_datarate < 13714) {tmp1 = 3;tmp2 = 4;} //13.714MHz TS clock
++ else if(input_datarate < 16000) {tmp1 = 3;tmp2 = 3;} //16MHz TS clock
++ else if(input_datarate < 19200) {tmp1 = 2;tmp2 = 3;} //19.2MHz TS clock
++ else {tmp1 = 2;tmp2 = 2;} //24MHz TS clock
++
++ if(state->demod_id == DS3000_ID) {
++ val = m88ds3103_readreg(state, 0xfe);
++ val &= 0xc0;
++ val |= ((u8)((tmp1<<3) + tmp2));
++ m88ds3103_writereg(state, 0xfe, val);
++ } else {
++ if(input_datarate < 5200) /*Max. 2011-12-23 11:55*/
++ input_datarate = 5200;
++
++ if(input_datarate != 0)
++ divid_ratio = (u8)(MClk_KHz / input_datarate);
++ else
++ divid_ratio = 0xFF;
++
++ if(divid_ratio > 128)
++ divid_ratio = 128;
++
++ if(divid_ratio < 2)
++ divid_ratio = 2;
++
++ tmp1 = (u8)(divid_ratio / 2);
++ tmp2 = (u8)(divid_ratio / 2);
++
++ if((divid_ratio % 2) != 0)
++ tmp2 += 1;
++
++ tmp1 -= 1;
++ tmp2 -= 1;
++
++ tmp1 &= 0x3f;
++ tmp2 &= 0x3f;
++
++ val = m88ds3103_readreg(state, 0xfe);
++ val &= 0xF0;
++ val |= (tmp2 >> 2) & 0x0f;
++ m88ds3103_writereg(state, 0xfe, val);
++
++ val = (u8)((tmp2 & 0x03) << 6);
++ val |= tmp1;
++ m88ds3103_writereg(state, 0xea, val);
++ }
++ }
++ return 0;
++}
++
++static int m88ds3103_demod_connect(struct dvb_frontend *fe, s32 carrier_offset_khz)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
++ u16 value;
++ u8 val1,val2,data;
++
++ dprintk("connect delivery system = %d\n", state->delivery_system);
++
++ /* ds3000 global reset */
++ m88ds3103_writereg(state, 0x07, 0x80);
++ m88ds3103_writereg(state, 0x07, 0x00);
++ /* ds3000 build-in uC reset */
++ m88ds3103_writereg(state, 0xb2, 0x01);
++ /* ds3000 software reset */
++ m88ds3103_writereg(state, 0x00, 0x01);
++
++ switch (state->delivery_system) {
++ case SYS_DVBS:
++ /* initialise the demod in DVB-S mode */
++ if(state->demod_id == DS3000_ID){
++ m88ds3103_init_reg(state, ds3000_dvbs_init_tab, sizeof(ds3000_dvbs_init_tab));
++
++ value = m88ds3103_readreg(state, 0xfe);
++ value &= 0xc0;
++ value |= 0x1b;
++ m88ds3103_writereg(state, 0xfe, value);
++
++ if(state->config->ci_mode)
++ val1 = 0x80;
++ else if(state->config->ts_mode)
++ val1 = 0x60;
++ else
++ val1 = 0x20;
++ m88ds3103_writereg(state, 0xfd, val1);
++
++ }else if(state->demod_id == DS3103_ID){
++ m88ds3103_init_reg(state, ds3103_dvbs_init_tab, sizeof(ds3103_dvbs_init_tab));
++
++ /* set ts clock */
++ if(state->config->ci_mode == 2){
++ val1 = 6; val2 = 6;
++ }else if(state->config->ts_mode == 0) {
++ val1 = 3; val2 = 3;
++ }else{
++ val1 = 0; val2 = 0;
++ }
++ val1 -= 1; val2 -= 1;
++ val1 &= 0x3f; val2 &= 0x3f;
++ data = m88ds3103_readreg(state, 0xfe);
++ data &= 0xf0;
++ data |= (val2 >> 2) & 0x0f;
++ m88ds3103_writereg(state, 0xfe, data);
++ data = (val2 & 0x03) << 6;
++ data |= val1;
++ m88ds3103_writereg(state, 0xea, data);
++
++ m88ds3103_writereg(state, 0x4d, 0xfd & m88ds3103_readreg(state, 0x4d));
++ m88ds3103_writereg(state, 0x30, 0xef & m88ds3103_readreg(state, 0x30));
++
++ /* set master clock */
++ val1 = m88ds3103_readreg(state, 0x22);
++ val2 = m88ds3103_readreg(state, 0x24);
++
++ val1 &= 0x3f;
++ val2 &= 0x3f;
++ val1 |= 0x80;
++ val2 |= 0x40;
++
++ m88ds3103_writereg(state, 0x22, val1);
++ m88ds3103_writereg(state, 0x24, val2);
++
++ if(state->config->ci_mode){
++ if(state->config->ci_mode == 2)
++ val1 = 0x43;
++ else
++ val1 = 0x03;
++ }
++ else if(state->config->ts_mode)
++ val1 = 0x06;
++ else
++ val1 = 0x42;
++ m88ds3103_writereg(state, 0xfd, val1);
++ }
++ break;
++ case SYS_DVBS2:
++ /* initialise the demod in DVB-S2 mode */
++ if(state->demod_id == DS3000_ID){
++ m88ds3103_init_reg(state, ds3000_dvbs2_init_tab, sizeof(ds3000_dvbs2_init_tab));
++
++ if (c->symbol_rate >= 30000000)
++ m88ds3103_writereg(state, 0xfe, 0x54);
++ else
++ m88ds3103_writereg(state, 0xfe, 0x98);
++
++ }else if(state->demod_id == DS3103_ID){
++ m88ds3103_init_reg(state, ds3103_dvbs2_init_tab, sizeof(ds3103_dvbs2_init_tab));
++
++ /* set ts clock */
++ if(state->config->ci_mode == 2){
++ val1 = 6; val2 = 6;
++ }else if(state->config->ts_mode == 0){
++ val1 = 5; val2 = 4;
++ }else{
++ val1 = 0; val2 = 0;
++ }
++ val1 -= 1; val2 -= 1;
++ val1 &= 0x3f; val2 &= 0x3f;
++ data = m88ds3103_readreg(state, 0xfe);
++ data &= 0xf0;
++ data |= (val2 >> 2) & 0x0f;
++ m88ds3103_writereg(state, 0xfe, data);
++ data = (val2 & 0x03) << 6;
++ data |= val1;
++ m88ds3103_writereg(state, 0xea, data);
++
++ m88ds3103_writereg(state, 0x4d, 0xfd & m88ds3103_readreg(state, 0x4d));
++ m88ds3103_writereg(state, 0x30, 0xef & m88ds3103_readreg(state, 0x30));
++
++ /* set master clock */
++ val1 = m88ds3103_readreg(state, 0x22);
++ val2 = m88ds3103_readreg(state, 0x24);
++
++ val1 &= 0x3f;
++ val2 &= 0x3f;
++ if((state->config->ci_mode == 2) || (state->config->ts_mode == 1)){
++ val1 |= 0x80;
++ val2 |= 0x40;
++ }else{
++ if (c->symbol_rate >= 28000000){
++ val1 |= 0xc0;
++ }else if (c->symbol_rate >= 18000000){
++ val2 |= 0x40;
++ }else{
++ val1 |= 0x80;
++ val2 |= 0x40;
++ }
++ }
++ m88ds3103_writereg(state, 0x22, val1);
++ m88ds3103_writereg(state, 0x24, val2);
++ }
++
++ if(state->config->ci_mode){
++ if(state->config->ci_mode == 2)
++ val1 = 0x43;
++ else
++ val1 = 0x03;
++ }
++ else if(state->config->ts_mode)
++ val1 = 0x06;
++ else
++ val1 = 0x42;
++ m88ds3103_writereg(state, 0xfd, val1);
++
++ break;
++ default:
++ return 1;
++ }
++ /* disable 27MHz clock output */
++ m88ds3103_writereg(state, 0x29, 0x80);
++ /* enable ac coupling */
++ m88ds3103_writereg(state, 0x25, 0x8a);
++
++ if ((c->symbol_rate / 1000) <= 3000){
++ m88ds3103_writereg(state, 0xc3, 0x08); /* 8 * 32 * 100 / 64 = 400*/
++ m88ds3103_writereg(state, 0xc8, 0x20);
++ m88ds3103_writereg(state, 0xc4, 0x08); /* 8 * 0 * 100 / 128 = 0*/
++ m88ds3103_writereg(state, 0xc7, 0x00);
++ }else if((c->symbol_rate / 1000) <= 10000){
++ m88ds3103_writereg(state, 0xc3, 0x08); /* 8 * 16 * 100 / 64 = 200*/
++ m88ds3103_writereg(state, 0xc8, 0x10);
++ m88ds3103_writereg(state, 0xc4, 0x08); /* 8 * 0 * 100 / 128 = 0*/
++ m88ds3103_writereg(state, 0xc7, 0x00);
++ }else{
++ m88ds3103_writereg(state, 0xc3, 0x08); /* 8 * 6 * 100 / 64 = 75*/
++ m88ds3103_writereg(state, 0xc8, 0x06);
++ m88ds3103_writereg(state, 0xc4, 0x08); /* 8 * 0 * 100 / 128 = 0*/
++ m88ds3103_writereg(state, 0xc7, 0x00);
++ }
++
++ m88ds3103_set_symrate(fe);
++
++ m88ds3103_set_CCI(fe);
++
++ m88ds3103_set_carrier_offset(fe, carrier_offset_khz);
++
++ /* ds3000 out of software reset */
++ m88ds3103_writereg(state, 0x00, 0x00);
++ /* start ds3000 build-in uC */
++ m88ds3103_writereg(state, 0xb2, 0x00);
++
++ return 0;
++}
++
++static int m88ds3103_set_frontend(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
++
++ int i;
++ fe_status_t status;
++ u8 lpf_mxdiv, mlpf_max, mlpf_min, nlpf, div4, capCode, changePLL;
++ s32 offset_khz, lpf_offset_KHz;
++ u16 value, ndiv, N, lpf_coeff;
++ u32 f3db, gdiv28, realFreq;
++ u8 RFgain;
++
++ dprintk("%s() ", __func__);
++ dprintk("c frequency = %d\n", c->frequency);
++ dprintk("symbol rate = %d\n", c->symbol_rate);
++ dprintk("delivery system = %d\n", c->delivery_system);
++
++ realFreq = c->frequency;
++ lpf_offset_KHz = 0;
++ if(c->symbol_rate < 5000000){
++ lpf_offset_KHz = FREQ_OFFSET_AT_SMALL_SYM_RATE_KHz;
++ realFreq += FREQ_OFFSET_AT_SMALL_SYM_RATE_KHz;
++ }
++
++ if (state->config->set_ts_params)
++ state->config->set_ts_params(fe, 0);
++
++ div4 = 0;
++ RFgain = 0;
++ if(state->tuner_id == TS2022_ID){
++ m88ds3103_tuner_writereg(state, 0x10, 0x0a);
++ m88ds3103_tuner_writereg(state, 0x11, 0x40);
++ if (realFreq < 1103000) {
++ m88ds3103_tuner_writereg(state, 0x10, 0x1b);
++ div4 = 1;
++ ndiv = (realFreq * (6 + 8) * 4)/MT_FE_CRYSTAL_KHZ;
++ }else {
++ ndiv = (realFreq * (6 + 8) * 2)/MT_FE_CRYSTAL_KHZ;
++ }
++ ndiv = ndiv + ndiv%2;
++ if(ndiv < 4095)
++ N = ndiv - 1024;
++ else if (ndiv < 6143)
++ N = ndiv + 1024;
++ else
++ N = ndiv + 3072;
++
++ m88ds3103_tuner_writereg(state, 0x01, (N & 0x3f00) >> 8);
++ }else{
++ m88ds3103_tuner_writereg(state, 0x10, 0x00);
++ if (realFreq < 1146000){
++ m88ds3103_tuner_writereg(state, 0x10, 0x11);
++ div4 = 1;
++ ndiv = (realFreq * (6 + 8) * 4) / MT_FE_CRYSTAL_KHZ;
++ }else{
++ m88ds3103_tuner_writereg(state, 0x10, 0x01);
++ ndiv = (realFreq * (6 + 8) * 2) / MT_FE_CRYSTAL_KHZ;
++ }
++ ndiv = ndiv + ndiv%2;
++ N = ndiv - 1024;
++ m88ds3103_tuner_writereg(state, 0x01, (N>>8)&0x0f);
++ }
++ /* set pll */
++ m88ds3103_tuner_writereg(state, 0x02, N & 0x00ff);
++ m88ds3103_tuner_writereg(state, 0x03, 0x06);
++ m88ds3103_tuner_writereg(state, 0x51, 0x0f);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x10);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++
++ if(state->tuner_id == TS2022_ID){
++ if(( realFreq >= 1650000 ) && (realFreq <= 1850000)){
++ msleep(5);
++ value = m88ds3103_tuner_readreg(state, 0x14);
++ value &= 0x7f;
++ if(value < 64){
++ m88ds3103_tuner_writereg(state, 0x10, 0x82);
++ m88ds3103_tuner_writereg(state, 0x11, 0x6f);
++
++ m88ds3103_tuner_writereg(state, 0x51, 0x0f);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x10);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ }
++ }
++ msleep(5);
++ value = m88ds3103_tuner_readreg(state, 0x14);
++ value &= 0x1f;
++
++ if(value > 19){
++ value = m88ds3103_tuner_readreg(state, 0x10);
++ value &= 0x1d;
++ m88ds3103_tuner_writereg(state, 0x10, value);
++ }
++ }else{
++ msleep(5);
++ value = m88ds3103_tuner_readreg(state, 0x66);
++ changePLL = (((value & 0x80) >> 7) != div4);
++
++ if(changePLL){
++ m88ds3103_tuner_writereg(state, 0x10, 0x11);
++ div4 = 1;
++ ndiv = (realFreq * (6 + 8) * 4)/MT_FE_CRYSTAL_KHZ;
++ ndiv = ndiv + ndiv%2;
++ N = ndiv - 1024;
++
++ m88ds3103_tuner_writereg(state, 0x01, (N>>8) & 0x0f);
++ m88ds3103_tuner_writereg(state, 0x02, N & 0xff);
++
++ m88ds3103_tuner_writereg(state, 0x51, 0x0f);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x10);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ }
++ }
++ /*set the RF gain*/
++ if(state->tuner_id == TS2020_ID)
++ m88ds3103_tuner_writereg(state, 0x60, 0x79);
++
++ m88ds3103_tuner_writereg(state, 0x51, 0x17);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x08);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ msleep(5);
++
++ if(state->tuner_id == TS2020_ID){
++ RFgain = m88ds3103_tuner_readreg(state, 0x3d);
++ RFgain &= 0x0f;
++ if(RFgain < 15){
++ if(RFgain < 4)
++ RFgain = 0;
++ else
++ RFgain = RFgain -3;
++ value = ((RFgain << 3) | 0x01) & 0x79;
++ m88ds3103_tuner_writereg(state, 0x60, value);
++ m88ds3103_tuner_writereg(state, 0x51, 0x17);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x08);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ }
++ }
++
++ /* set the LPF */
++ if(state->tuner_id == TS2022_ID){
++ m88ds3103_tuner_writereg(state, 0x25, 0x00);
++ m88ds3103_tuner_writereg(state, 0x27, 0x70);
++ m88ds3103_tuner_writereg(state, 0x41, 0x09);
++ m88ds3103_tuner_writereg(state, 0x08, 0x0b);
++ }
++
++ f3db = ((c->symbol_rate / 1000) *135) / 200 + 2000;
++ f3db += lpf_offset_KHz;
++ if (f3db < 7000)
++ f3db = 7000;
++ if (f3db > 40000)
++ f3db = 40000;
++
++ gdiv28 = (MT_FE_CRYSTAL_KHZ / 1000 * 1694 + 500) / 1000;
++ m88ds3103_tuner_writereg(state, 0x04, gdiv28 & 0xff);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1b);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x04);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ msleep(5);
++
++ value = m88ds3103_tuner_readreg(state, 0x26);
++ capCode = value & 0x3f;
++ if(state->tuner_id == TS2022_ID){
++ m88ds3103_tuner_writereg(state, 0x41, 0x0d);
++
++ m88ds3103_tuner_writereg(state, 0x51, 0x1b);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x04);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++
++ msleep(2);
++
++ value = m88ds3103_tuner_readreg(state, 0x26);
++ value &= 0x3f;
++ value = (capCode + value) / 2;
++ }
++ else
++ value = capCode;
++
++ gdiv28 = gdiv28 * 207 / (value * 2 + 151);
++ mlpf_max = gdiv28 * 135 / 100;
++ mlpf_min = gdiv28 * 78 / 100;
++ if (mlpf_max > 63)
++ mlpf_max = 63;
++
++ if(state->tuner_id == TS2022_ID)
++ lpf_coeff = 3200;
++ else
++ lpf_coeff = 2766;
++
++ nlpf = (f3db * gdiv28 * 2 / lpf_coeff / (MT_FE_CRYSTAL_KHZ / 1000) + 1) / 2 ;
++ if (nlpf > 23) nlpf = 23;
++ if (nlpf < 1) nlpf = 1;
++
++ lpf_mxdiv = (nlpf * (MT_FE_CRYSTAL_KHZ / 1000) * lpf_coeff * 2 / f3db + 1) / 2;
++
++ if (lpf_mxdiv < mlpf_min){
++ nlpf++;
++ lpf_mxdiv = (nlpf * (MT_FE_CRYSTAL_KHZ / 1000) * lpf_coeff * 2 / f3db + 1) / 2;
++ }
++
++ if (lpf_mxdiv > mlpf_max)
++ lpf_mxdiv = mlpf_max;
++
++ m88ds3103_tuner_writereg(state, 0x04, lpf_mxdiv);
++ m88ds3103_tuner_writereg(state, 0x06, nlpf);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1b);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x04);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ msleep(5);
++
++ if(state->tuner_id == TS2022_ID){
++ msleep(2);
++ value = m88ds3103_tuner_readreg(state, 0x26);
++ capCode = value & 0x3f;
++
++ m88ds3103_tuner_writereg(state, 0x41, 0x09);
++
++ m88ds3103_tuner_writereg(state, 0x51, 0x1b);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x04);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++
++ msleep(2);
++ value = m88ds3103_tuner_readreg(state, 0x26);
++ value &= 0x3f;
++ value = (capCode + value) / 2;
++
++ value = value | 0x80;
++ m88ds3103_tuner_writereg(state, 0x25, value);
++ m88ds3103_tuner_writereg(state, 0x27, 0x30);
++
++ m88ds3103_tuner_writereg(state, 0x08, 0x09);
++ }
++
++ /* Set the BB gain */
++ m88ds3103_tuner_writereg(state, 0x51, 0x1e);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x01);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ if(state->tuner_id == TS2020_ID){
++ if(RFgain == 15){
++ msleep(40);
++ value = m88ds3103_tuner_readreg(state, 0x21);
++ value &= 0x0f;
++ if(value < 3){
++ m88ds3103_tuner_writereg(state, 0x60, 0x61);
++ m88ds3103_tuner_writereg(state, 0x51, 0x17);
++ m88ds3103_tuner_writereg(state, 0x51, 0x1f);
++ m88ds3103_tuner_writereg(state, 0x50, 0x08);
++ m88ds3103_tuner_writereg(state, 0x50, 0x00);
++ }
++ }
++ }
++ msleep(60);
++
++ offset_khz = (ndiv) * MT_FE_CRYSTAL_KHZ
++ / (6 + 8) / (div4 + 1) / 2 - realFreq;
++
++ m88ds3103_demod_connect(fe, offset_khz+lpf_offset_KHz);
++
++ for (i = 0; i < 30 ; i++) {
++ m88ds3103_read_status(fe, &status);
++ if (status & FE_HAS_LOCK){
++ break;
++ }
++ msleep(20);
++ }
++
++#ifdef _AUTO_S2_
++ if((status & FE_HAS_LOCK) == 0){
++ state->delivery_system = (state->delivery_system == SYS_DVBS) ? SYS_DVBS2 : SYS_DVBS;
++ m88ds3103_demod_connect(fe, offset_khz);
++
++ for (i = 0; i < 30 ; i++) {
++ m88ds3103_read_status(fe, &status);
++ if (status & FE_HAS_LOCK){
++ break;
++ }
++ msleep(20);
++ }
++ }
++#else
++ state->delivery_system = c->delivery_system;
++#endif
++ if (status & FE_HAS_LOCK){
++ if(state->config->ci_mode == 2)
++ m88ds3103_set_clock_ratio(state);
++ if(state->config->start_ctrl){
++ if(state->first_lock == 0){
++ state->config->start_ctrl(fe);
++ state->first_lock = 1;
++ }
++ }
++ }
++
++ return 0;
++}
++
++static int m88ds3103_tune(struct dvb_frontend *fe,
++ bool re_tune,
++ unsigned int mode_flags,
++ unsigned int *delay,
++ fe_status_t *status)
++{
++ *delay = HZ / 5;
++
++ dprintk("%s() ", __func__);
++ dprintk("re_tune = %d\n", re_tune);
++
++ if (re_tune) {
++ int ret = m88ds3103_set_frontend(fe);
++ if (ret)
++ return ret;
++ }
++
++ return m88ds3103_read_status(fe, status);
++}
++
++static enum dvbfe_algo m88ds3103_get_algo(struct dvb_frontend *fe)
++{
++ return DVBFE_ALGO_HW;
++}
++
++ /*
++ * Power config will reset and load initial firmware if required
++ */
++static int m88ds3103_initilaze(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ int ret;
++
++ dprintk("%s()\n", __func__);
++ /* hard reset */
++ m88ds3103_writereg(state, 0x07, 0x80);
++ m88ds3103_writereg(state, 0x07, 0x00);
++ msleep(1);
++
++ m88ds3103_writereg(state, 0x08, 0x01 | m88ds3103_readreg(state, 0x08));
++ msleep(1);
++
++ if(state->tuner_id == TS2020_ID){
++ /* TS2020 init */
++ m88ds3103_tuner_writereg(state, 0x42, 0x73);
++ msleep(2);
++ m88ds3103_tuner_writereg(state, 0x05, 0x01);
++ m88ds3103_tuner_writereg(state, 0x62, 0xb5);
++ m88ds3103_tuner_writereg(state, 0x07, 0x02);
++ m88ds3103_tuner_writereg(state, 0x08, 0x01);
++ }
++ else if(state->tuner_id == TS2022_ID){
++ /* TS2022 init */
++ m88ds3103_tuner_writereg(state, 0x62, 0x6c);
++ msleep(2);
++ m88ds3103_tuner_writereg(state, 0x42, 0x6c);
++ msleep(2);
++ m88ds3103_tuner_writereg(state, 0x7d, 0x9d);
++ m88ds3103_tuner_writereg(state, 0x7c, 0x9a);
++ m88ds3103_tuner_writereg(state, 0x7a, 0x76);
++
++ m88ds3103_tuner_writereg(state, 0x3b, 0x01);
++ m88ds3103_tuner_writereg(state, 0x63, 0x88);
++
++ m88ds3103_tuner_writereg(state, 0x61, 0x85);
++ m88ds3103_tuner_writereg(state, 0x22, 0x30);
++ m88ds3103_tuner_writereg(state, 0x30, 0x40);
++ m88ds3103_tuner_writereg(state, 0x20, 0x23);
++ m88ds3103_tuner_writereg(state, 0x24, 0x02);
++ m88ds3103_tuner_writereg(state, 0x12, 0xa0);
++ }
++
++ if(state->demod_id == DS3103_ID){
++ m88ds3103_writereg(state, 0x07, 0xe0);
++ m88ds3103_writereg(state, 0x07, 0x00);
++ msleep(1);
++ }
++ m88ds3103_writereg(state, 0xb2, 0x01);
++
++ /* Load the firmware if required */
++ ret = m88ds3103_load_firmware(fe);
++ if (ret != 0){
++ printk(KERN_ERR "%s: Unable initialize firmware\n", __func__);
++ return ret;
++ }
++ if(state->demod_id == DS3103_ID){
++ m88ds3103_writereg(state, 0x4d, 0xfd & m88ds3103_readreg(state, 0x4d));
++ m88ds3103_writereg(state, 0x30, 0xef & m88ds3103_readreg(state, 0x30));
++ }
++
++ return 0;
++}
++
++/*
++ * Initialise or wake up device
++ */
++static int m88ds3103_initfe(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++ u8 val;
++
++ dprintk("%s()\n", __func__);
++
++ /* 1st step to wake up demod */
++ m88ds3103_writereg(state, 0x08, 0x01 | m88ds3103_readreg(state, 0x08));
++ m88ds3103_writereg(state, 0x04, 0xfe & m88ds3103_readreg(state, 0x04));
++ m88ds3103_writereg(state, 0x23, 0xef & m88ds3103_readreg(state, 0x23));
++
++ /* 2nd step to wake up tuner */
++ val = m88ds3103_tuner_readreg(state, 0x00) & 0xff;
++ if((val & 0x01) == 0){
++ m88ds3103_tuner_writereg(state, 0x00, 0x01);
++ msleep(50);
++ }
++ m88ds3103_tuner_writereg(state, 0x00, 0x03);
++ msleep(50);
++
++ return 0;
++}
++
++/* Put device to sleep */
++static int m88ds3103_sleep(struct dvb_frontend *fe)
++{
++ struct m88ds3103_state *state = fe->demodulator_priv;
++
++ dprintk("%s()\n", __func__);
++
++ /* 1st step to sleep tuner */
++ m88ds3103_tuner_writereg(state, 0x00, 0x00);
++
++ /* 2nd step to sleep demod */
++ m88ds3103_writereg(state, 0x08, 0xfe & m88ds3103_readreg(state, 0x08));
++ m88ds3103_writereg(state, 0x04, 0x01 | m88ds3103_readreg(state, 0x04));
++ m88ds3103_writereg(state, 0x23, 0x10 | m88ds3103_readreg(state, 0x23));
++
++
++ return 0;
++}
++
++static struct dvb_frontend_ops m88ds3103_ops = {
++ .delsys = { SYS_DVBS, SYS_DVBS2},
++ .info = {
++ .name = "Montage DS3103/TS2022",
++ .type = FE_QPSK,
++ .frequency_min = 950000,
++ .frequency_max = 2150000,
++ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
++ .frequency_tolerance = 5000,
++ .symbol_rate_min = 1000000,
++ .symbol_rate_max = 45000000,
++ .caps = FE_CAN_INVERSION_AUTO |
++ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
++ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
++ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
++ FE_CAN_2G_MODULATION |
++ FE_CAN_QPSK | FE_CAN_RECOVER
++ },
++
++ .release = m88ds3103_release,
++
++ .init = m88ds3103_initfe,
++ .sleep = m88ds3103_sleep,
++ .read_status = m88ds3103_read_status,
++ .read_ber = m88ds3103_read_ber,
++ .read_signal_strength = m88ds3103_read_signal_strength,
++ .read_snr = m88ds3103_read_snr,
++ .read_ucblocks = m88ds3103_read_ucblocks,
++ .set_tone = m88ds3103_set_tone,
++ .set_voltage = m88ds3103_set_voltage,
++ .diseqc_send_master_cmd = m88ds3103_send_diseqc_msg,
++ .diseqc_send_burst = m88ds3103_diseqc_send_burst,
++ .get_frontend_algo = m88ds3103_get_algo,
++ .tune = m88ds3103_tune,
++ .set_frontend = m88ds3103_set_frontend,
++};
++
++MODULE_DESCRIPTION("DVB Frontend module for Montage DS3103/TS2022 hardware");
++MODULE_AUTHOR("Max nibble");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/media/dvb-frontends/dvbsky_m88ds3103.h b/drivers/media/dvb-frontends/dvbsky_m88ds3103.h
+new file mode 100644
+index 0000000..e2358d6
+--- /dev/null
++++ b/drivers/media/dvb-frontends/dvbsky_m88ds3103.h
+@@ -0,0 +1,54 @@
++/*
++ Montage Technology M88DS3103/M88TS2022 - DVBS/S2 Satellite demod/tuner driver
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef DVBSKY_M88DS3103_H
++#define DVBSKY_M88DS3103_H
++
++#include <linux/kconfig.h>
++#include <linux/dvb/frontend.h>
++
++struct dvbsky_m88ds3103_config {
++ /* the demodulator's i2c address */
++ u8 demod_address;
++ u8 ci_mode;
++ u8 pin_ctrl;
++ u8 ts_mode; /* 0: Parallel, 1: Serial */
++ u8 tuner_readstops;
++
++ /* Set device param to start dma */
++ int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
++ /* Start to transfer data */
++ int (*start_ctrl)(struct dvb_frontend *fe);
++ /* Set LNB voltage */
++ int (*set_voltage)(struct dvb_frontend* fe, fe_sec_voltage_t voltage);
++};
++
++#if IS_ENABLED(CONFIG_DVB_DVBSKY_M88DS3103)
++extern struct dvb_frontend *dvbsky_m88ds3103_attach(
++ const struct dvbsky_m88ds3103_config *config,
++ struct i2c_adapter *i2c);
++#else
++static inline struct dvb_frontend *dvbsky_m88ds3103_attach(
++ const struct dvbsky_m88ds3103_config *config,
++ struct i2c_adapter *i2c)
++{
++ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
++ return NULL;
++}
++#endif /* CONFIG_DVB_DVBSKY_M88DS3103 */
++#endif /* DVBSKY_M88DS3103_H */
+diff --git a/drivers/media/dvb-frontends/dvbsky_m88ds3103_priv.h b/drivers/media/dvb-frontends/dvbsky_m88ds3103_priv.h
+new file mode 100644
+index 0000000..9966931
+--- /dev/null
++++ b/drivers/media/dvb-frontends/dvbsky_m88ds3103_priv.h
+@@ -0,0 +1,403 @@
++/*
++ Montage Technology M88DS3103/M88TS2022 - DVBS/S2 Satellite demod/tuner driver
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef DVBSKY_M88DS3103_PRIV_H
++#define DVBSKY_M88DS3103_PRIV_H
++
++#define FW_DOWN_SIZE 32
++#define FW_DOWN_LOOP (8192/FW_DOWN_SIZE)
++#define DS3103_DEFAULT_FIRMWARE "dvb-fe-ds3103.fw"
++#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds300x.fw"
++#define MT_FE_MCLK_KHZ 96000 /* in kHz */
++#define MT_FE_CRYSTAL_KHZ 27000 /* in kHz */
++#define FREQ_OFFSET_AT_SMALL_SYM_RATE_KHz 3000
++#define DS3000_ID 0x3000
++#define DS3103_ID 0x3103
++#define TS2020_ID 0x2020
++#define TS2022_ID 0x2022
++#define UNKNOW_ID 0x0000
++
++struct m88ds3103_state {
++ struct i2c_adapter *i2c;
++ const struct dvbsky_m88ds3103_config *config;
++
++ struct dvb_frontend frontend;
++
++ u32 preBer;
++ u8 skip_fw_load;
++ u8 first_lock; /* The first time of signal lock */
++ u16 demod_id; /* demod chip type */
++ u16 tuner_id; /* tuner chip type */
++ fe_delivery_system_t delivery_system;
++};
++
++/* For M88DS3103 demod dvbs mode.*/
++static u8 ds3103_dvbs_init_tab[] = {
++ 0x23, 0x07,
++ 0x08, 0x03,
++ 0x0c, 0x02,
++ 0x21, 0x54,
++ 0x25, 0x82,
++ 0x27, 0x31,
++ 0x30, 0x08,
++ 0x31, 0x40,
++ 0x32, 0x32,
++ 0x33, 0x35,
++ 0x35, 0xff,
++ 0x3a, 0x00,
++ 0x37, 0x10,
++ 0x38, 0x10,
++ 0x39, 0x02,
++ 0x42, 0x60,
++ 0x4a, 0x80,
++ 0x4b, 0x04,
++ 0x4d, 0x91,
++ 0x5d, 0xc8,
++ 0x50, 0x36,
++ 0x51, 0x36,
++ 0x52, 0x36,
++ 0x53, 0x36,
++ 0x63, 0x0f,
++ 0x64, 0x30,
++ 0x65, 0x40,
++ 0x68, 0x26,
++ 0x69, 0x4c,
++ 0x70, 0x20,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x40,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x60,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x80,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0xa0,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x1f,
++ 0x76, 0x38,
++ 0x77, 0xa6,
++ 0x78, 0x0c,
++ 0x79, 0x80,
++ 0x7f, 0x14,
++ 0x7c, 0x00,
++ 0xae, 0x82,
++ 0x80, 0x64,
++ 0x81, 0x66,
++ 0x82, 0x44,
++ 0x85, 0x04,
++ 0xcd, 0xf4,
++ 0x90, 0x33,
++ 0xa0, 0x44,
++ 0xc0, 0x08,
++ 0xc3, 0x10,
++ 0xc4, 0x08,
++ 0xc5, 0xf0,
++ 0xc6, 0xff,
++ 0xc7, 0x00,
++ 0xc8, 0x1a,
++ 0xc9, 0x80,
++ 0xe0, 0xf8,
++ 0xe6, 0x8b,
++ 0xd0, 0x40,
++ 0xf8, 0x20,
++ 0xfa, 0x0f,
++ 0x00, 0x00,
++ 0xbd, 0x01,
++ 0xb8, 0x00,
++};
++/* For M88DS3103 demod dvbs2 mode.*/
++static u8 ds3103_dvbs2_init_tab[] = {
++ 0x23, 0x07,
++ 0x08, 0x07,
++ 0x0c, 0x02,
++ 0x21, 0x54,
++ 0x25, 0x82,
++ 0x27, 0x31,
++ 0x30, 0x08,
++ 0x32, 0x32,
++ 0x33, 0x35,
++ 0x35, 0xff,
++ 0x3a, 0x00,
++ 0x37, 0x10,
++ 0x38, 0x10,
++ 0x39, 0x02,
++ 0x42, 0x60,
++ 0x4a, 0x80,
++ 0x4b, 0x04,
++ 0x4d, 0x91,
++ 0x5d, 0xc8,
++ 0x50, 0x36,
++ 0x51, 0x36,
++ 0x52, 0x36,
++ 0x53, 0x36,
++ 0x63, 0x0f,
++ 0x64, 0x10,
++ 0x65, 0x20,
++ 0x68, 0x46,
++ 0x69, 0xcd,
++ 0x70, 0x20,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x40,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x60,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x80,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0xa0,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x1f,
++ 0x76, 0x38,
++ 0x77, 0xa6,
++ 0x78, 0x0c,
++ 0x79, 0x80,
++ 0x7f, 0x14,
++ 0x85, 0x08,
++ 0xcd, 0xf4,
++ 0x90, 0x33,
++ 0x86, 0x00,
++ 0x87, 0x0f,
++ 0x89, 0x00,
++ 0x8b, 0x44,
++ 0x8c, 0x66,
++ 0x9d, 0xc1,
++ 0x8a, 0x10,
++ 0xad, 0x40,
++ 0xa0, 0x44,
++ 0xc0, 0x08,
++ 0xc1, 0x10,
++ 0xc2, 0x08,
++ 0xc3, 0x10,
++ 0xc4, 0x08,
++ 0xc5, 0xf0,
++ 0xc6, 0xff,
++ 0xc7, 0x00,
++ 0xc8, 0x1a,
++ 0xc9, 0x80,
++ 0xca, 0x23,
++ 0xcb, 0x24,
++ 0xcc, 0xf4,
++ 0xce, 0x74,
++ 0x00, 0x00,
++ 0xbd, 0x01,
++ 0xb8, 0x00,
++};
++
++/* For M88DS3000 demod dvbs mode.*/
++static u8 ds3000_dvbs_init_tab[] = {
++ 0x23, 0x05,
++ 0x08, 0x03,
++ 0x0c, 0x02,
++ 0x21, 0x54,
++ 0x25, 0x82,
++ 0x27, 0x31,
++ 0x30, 0x08,
++ 0x31, 0x40,
++ 0x32, 0x32,
++ 0x33, 0x35,
++ 0x35, 0xff,
++ 0x3a, 0x00,
++ 0x37, 0x10,
++ 0x38, 0x10,
++ 0x39, 0x02,
++ 0x42, 0x60,
++ 0x4a, 0x40,
++ 0x4b, 0x04,
++ 0x4d, 0x91,
++ 0x5d, 0xc8,
++ 0x50, 0x77,
++ 0x51, 0x77,
++ 0x52, 0x36,
++ 0x53, 0x36,
++ 0x56, 0x01,
++ 0x63, 0x47,
++ 0x64, 0x30,
++ 0x65, 0x40,
++ 0x68, 0x26,
++ 0x69, 0x4c,
++ 0x70, 0x20,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x40,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x60,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x80,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0xa0,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x1f,
++ 0x76, 0x00,
++ 0x77, 0xd1,
++ 0x78, 0x0c,
++ 0x79, 0x80,
++ 0x7f, 0x04,
++ 0x7c, 0x00,
++ 0x80, 0x86,
++ 0x81, 0xa6,
++ 0x85, 0x04,
++ 0xcd, 0xf4,
++ 0x90, 0x33,
++ 0xa0, 0x44,
++ 0xc0, 0x18,
++ 0xc3, 0x10,
++ 0xc4, 0x08,
++ 0xc5, 0x80,
++ 0xc6, 0x80,
++ 0xc7, 0x0a,
++ 0xc8, 0x1a,
++ 0xc9, 0x80,
++ 0xfe, 0xb6,
++ 0xe0, 0xf8,
++ 0xe6, 0x8b,
++ 0xd0, 0x40,
++ 0xf8, 0x20,
++ 0xfa, 0x0f,
++ 0xad, 0x20,
++ 0xae, 0x07,
++ 0xb8, 0x00,
++};
++
++/* For M88DS3000 demod dvbs2 mode.*/
++static u8 ds3000_dvbs2_init_tab[] = {
++ 0x23, 0x0f,
++ 0x08, 0x07,
++ 0x0c, 0x02,
++ 0x21, 0x54,
++ 0x25, 0x82,
++ 0x27, 0x31,
++ 0x30, 0x08,
++ 0x31, 0x32,
++ 0x32, 0x32,
++ 0x33, 0x35,
++ 0x35, 0xff,
++ 0x3a, 0x00,
++ 0x37, 0x10,
++ 0x38, 0x10,
++ 0x39, 0x02,
++ 0x42, 0x60,
++ 0x4a, 0x80,
++ 0x4b, 0x04,
++ 0x4d, 0x91,
++ 0x5d, 0x88,
++ 0x50, 0x36,
++ 0x51, 0x36,
++ 0x52, 0x36,
++ 0x53, 0x36,
++ 0x63, 0x60,
++ 0x64, 0x10,
++ 0x65, 0x10,
++ 0x68, 0x04,
++ 0x69, 0x29,
++ 0x70, 0x20,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x40,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x60,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x80,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0xa0,
++ 0x71, 0x70,
++ 0x72, 0x04,
++ 0x73, 0x00,
++ 0x70, 0x1f,
++ 0xa0, 0x44,
++ 0xc0, 0x08,
++ 0xc1, 0x10,
++ 0xc2, 0x08,
++ 0xc3, 0x10,
++ 0xc4, 0x08,
++ 0xc5, 0xf0,
++ 0xc6, 0xf0,
++ 0xc7, 0x0a,
++ 0xc8, 0x1a,
++ 0xc9, 0x80,
++ 0xca, 0x23,
++ 0xcb, 0x24,
++ 0xce, 0x74,
++ 0x56, 0x01,
++ 0x90, 0x03,
++ 0x76, 0x80,
++ 0x77, 0x42,
++ 0x78, 0x0a,
++ 0x79, 0x80,
++ 0xad, 0x40,
++ 0xae, 0x07,
++ 0x7f, 0xd4,
++ 0x7c, 0x00,
++ 0x80, 0xa8,
++ 0x81, 0xda,
++ 0x7c, 0x01,
++ 0x80, 0xda,
++ 0x81, 0xec,
++ 0x7c, 0x02,
++ 0x80, 0xca,
++ 0x81, 0xeb,
++ 0x7c, 0x03,
++ 0x80, 0xba,
++ 0x81, 0xdb,
++ 0x85, 0x08,
++ 0x86, 0x00,
++ 0x87, 0x02,
++ 0x89, 0x80,
++ 0x8b, 0x44,
++ 0x8c, 0xaa,
++ 0x8a, 0x10,
++ 0xba, 0x00,
++ 0xf5, 0x04,
++ 0xd2, 0x32,
++ 0xb8, 0x00,
++};
++
++#endif /* DVBSKY_M88DS3103_PRIV_H */
+diff --git a/drivers/media/dvb-frontends/m88dc2800.c b/drivers/media/dvb-frontends/m88dc2800.c
+new file mode 100644
+index 0000000..f876a11
+--- /dev/null
++++ b/drivers/media/dvb-frontends/m88dc2800.c
+@@ -0,0 +1,2124 @@
++/*
++ M88DC2800/M88TC2800 - DVB-C demodulator and tuner from Montage
++
++ Copyright (C) 2012 Max nibble<nibble.max(a)gmail.com>
++ Copyright (C) 2011 Montage Technology / www.montage-tech.com
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*/
++
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++#include <asm/div64.h>
++#include "dvb_frontend.h"
++#include "m88dc2800.h"
++
++struct m88dc2800_state {
++ struct i2c_adapter *i2c;
++ const struct m88dc2800_config *config;
++ struct dvb_frontend frontend;
++ u32 freq;
++ u32 ber;
++ u32 sym;
++ u16 qam;
++ u8 inverted;
++ u32 xtal;
++ /* tuner state */
++ u8 tuner_init_OK; /* Tuner initialize status */
++ u8 tuner_dev_addr; /* Tuner device address */
++ u32 tuner_freq; /* RF frequency to be set, unit: KHz */
++ u16 tuner_qam; /* Reserved */
++ u16 tuner_mode;
++ u8 tuner_bandwidth; /* Bandwidth of the channel, unit: MHz, 6/7/8 */
++ u8 tuner_loopthrough; /* Tuner loop through switch, 0/1 */
++ u32 tuner_crystal; /* Tuner crystal frequency, unit: KHz */
++ u32 tuner_dac; /* Tuner DAC frequency, unit: KHz */
++ u16 tuner_mtt; /* Tuner chip version, D1: 0x0d, E0: 0x0e, E1: 0x8e */
++ u16 tuner_custom_cfg;
++ u32 tuner_version; /* Tuner driver version number */
++ u32 tuner_time;
++};
++
++static int debug;
++module_param(debug, int, 0644);
++MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
++
++#define dprintk(args...) \
++ do { \
++ if (debug) \
++ printk(KERN_INFO "m88dc2800: " args); \
++ } while (0)
++
++
++static int m88dc2800_i2c_write(struct m88dc2800_state *state, u8 addr,
++ u8 * p_data, u8 len)
++{
++ struct i2c_msg msg = { .flags = 0 };
++
++ msg.addr = addr;
++ msg.buf = p_data;
++ msg.len = len;
++
++ return i2c_transfer(state->i2c, &msg, 1);
++}
++
++static int m88dc2800_i2c_read(struct m88dc2800_state *state, u8 addr,
++ u8 * p_data, u8 len)
++{
++ struct i2c_msg msg = { .flags = I2C_M_RD };
++
++ msg.addr = addr;
++ msg.buf = p_data;
++ msg.len = len;
++
++ return i2c_transfer(state->i2c, &msg, 1);
++}
++
++/*demod register operations.*/
++static int WriteReg(struct m88dc2800_state *state, u8 reg, u8 data)
++{
++ u8 buf[] = { reg, data };
++ u8 addr = state->config->demod_address;
++ int err;
++
++ dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
++
++ err = m88dc2800_i2c_write(state, addr, buf, 2);
++
++ if (err != 1) {
++ printk(KERN_ERR
++ "%s: writereg error(err == %i, reg == 0x%02x,"
++ " value == 0x%02x)\n", __func__, err, reg, data);
++ return -EIO;
++ }
++ return 0;
++}
++
++static int ReadReg(struct m88dc2800_state *state, u8 reg)
++{
++ int ret;
++ u8 b0[] = { reg };
++ u8 b1[] = { 0 };
++ u8 addr = state->config->demod_address;
++
++ ret = m88dc2800_i2c_write(state, addr, b0, 1);
++
++ if (ret != 1) {
++ printk(KERN_ERR "%s: reg=0x%x (error=%d)\n",
++ __func__, reg, ret);
++ return -EIO;
++ }
++
++ ret = m88dc2800_i2c_read(state, addr, b1, 1);
++
++ dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
++ return b1[0];
++}
++
++static int _mt_fe_tn_set_reg(struct m88dc2800_state *state, u8 reg,
++ u8 data)
++{
++ int ret;
++ u8 buf[2];
++ u8 addr = state->tuner_dev_addr;
++
++ buf[1] = ReadReg(state, 0x86);
++ buf[1] |= 0x80;
++ ret = WriteReg(state, 0x86, buf[1]);
++
++ buf[0] = reg;
++ buf[1] = data;
++
++ ret = m88dc2800_i2c_write(state, addr, buf, 2);
++ if (ret != 1)
++ return -EIO;
++ return 0;
++}
++
++static int _mt_fe_tn_get_reg(struct m88dc2800_state *state, u8 reg,
++ u8 * p_data)
++{
++ int ret;
++ u8 buf[2];
++ u8 addr = state->tuner_dev_addr;
++
++ buf[1] = ReadReg(state, 0x86);
++ buf[1] |= 0x80;
++ ret = WriteReg(state, 0x86, buf[1]);
++
++ buf[0] = reg;
++ ret = m88dc2800_i2c_write(state, addr, buf, 1);
++
++ msleep(1);
++
++ buf[1] = ReadReg(state, 0x86);
++ buf[1] |= 0x80;
++ ret = WriteReg(state, 0x86, buf[1]);
++
++ return m88dc2800_i2c_read(state, addr, p_data, 1);
++}
++
++/* Tuner operation functions.*/
++static int _mt_fe_tn_set_RF_front_tc2800(struct m88dc2800_state *state)
++{
++ u32 freq_KHz = state->tuner_freq;
++ u8 a, b, c;
++ if (state->tuner_mtt == 0xD1) { /* D1 */
++ if (freq_KHz <= 123000) {
++ if (freq_KHz <= 56000) {
++ a = 0x00; b = 0x00; c = 0x00;
++ } else if (freq_KHz <= 64000) {
++ a = 0x10; b = 0x01; c = 0x08;
++ } else if (freq_KHz <= 72000) {
++ a = 0x20; b = 0x02; c = 0x10;
++ } else if (freq_KHz <= 80000) {
++ a = 0x30; b = 0x03; c = 0x18;
++ } else if (freq_KHz <= 88000) {
++ a = 0x40; b = 0x04; c = 0x20;
++ } else if (freq_KHz <= 96000) {
++ a = 0x50; b = 0x05; c = 0x28;
++ } else if (freq_KHz <= 104000) {
++ a = 0x60; b = 0x06; c = 0x30;
++ } else {
++ a = 0x70; b = 0x07; c = 0x38;
++ }
++ _mt_fe_tn_set_reg(state, 0x58, 0x9b);
++ _mt_fe_tn_set_reg(state, 0x59, a);
++ _mt_fe_tn_set_reg(state, 0x5d, b);
++ _mt_fe_tn_set_reg(state, 0x5e, c);
++ _mt_fe_tn_set_reg(state, 0x5a, 0x75);
++ _mt_fe_tn_set_reg(state, 0x73, 0x0c);
++ } else { /* if (freq_KHz > 112000) */
++ _mt_fe_tn_set_reg(state, 0x58, 0x7b);
++ if (freq_KHz <= 304000) {
++ if (freq_KHz <= 136000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x40);
++ } else if (freq_KHz <= 160000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x48);
++ } else if (freq_KHz <= 184000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x50);
++ } else if (freq_KHz <= 208000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x58);
++ } else if (freq_KHz <= 232000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x60);
++ } else if (freq_KHz <= 256000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x68);
++ } else if (freq_KHz <= 280000) {
++ _mt_fe_tn_set_reg(state, 0x5e, 0x70);
++ } else { /* if (freq_KHz <= 304000) */
++ _mt_fe_tn_set_reg(state, 0x5e, 0x78);
++ }
++ if (freq_KHz <= 171000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x08);
++ } else if (freq_KHz <= 211000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x0a);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x73, 0x0e);
++ }
++ } else { /* if (freq_KHz > 304000) */
++ _mt_fe_tn_set_reg(state, 0x5e, 0x88);
++ if (freq_KHz <= 400000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x0c);
++ } else if (freq_KHz <= 450000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x09);
++ } else if (freq_KHz <= 550000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x0e);
++ } else if (freq_KHz <= 650000) {
++ _mt_fe_tn_set_reg(state, 0x73, 0x0d);
++ } else { /*if (freq_KHz > 650000) */
++ _mt_fe_tn_set_reg(state, 0x73, 0x0e);
++ }
++ }
++ }
++ if (freq_KHz > 800000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x24);
++ else if (freq_KHz > 700000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x34);
++ else if (freq_KHz > 500000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x44);
++ else if (freq_KHz > 300000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x43);
++ else if (freq_KHz > 220000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ else if (freq_KHz > 110000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x14);
++ else
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ if (freq_KHz > 600000)
++ _mt_fe_tn_set_reg(state, 0x6a, 0x53);
++ else if (freq_KHz > 500000)
++ _mt_fe_tn_set_reg(state, 0x6a, 0x57);
++ else
++ _mt_fe_tn_set_reg(state, 0x6a, 0x59);
++ if (freq_KHz < 200000) {
++ _mt_fe_tn_set_reg(state, 0x20, 0x5d);
++ } else if (freq_KHz < 500000) {
++ _mt_fe_tn_set_reg(state, 0x20, 0x7d);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x20, 0xfd);
++ } /* end of 0xD1 */
++ } else if (state->tuner_mtt == 0xE1) { /* E1 */
++ if (freq_KHz <= 112000) { /* 123MHz */
++ if (freq_KHz <= 56000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x01);
++ } else if (freq_KHz <= 64000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x09);
++ } else if (freq_KHz <= 72000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x11);
++ } else if (freq_KHz <= 80000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x19);
++ } else if (freq_KHz <= 88000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x21);
++ } else if (freq_KHz <= 96000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x29);
++ } else if (freq_KHz <= 104000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x31);
++ } else { /* if (freq_KHz <= 112000) */
++ _mt_fe_tn_set_reg(state, 0x5c, 0x39);
++ }
++ _mt_fe_tn_set_reg(state, 0x5b, 0x30);
++ } else { /* if (freq_KHz > 112000) */
++ if (freq_KHz <= 304000) {
++ if (freq_KHz <= 136000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x41);
++ } else if (freq_KHz <= 160000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x49);
++ } else if (freq_KHz <= 184000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x51);
++ } else if (freq_KHz <= 208000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x59);
++ } else if (freq_KHz <= 232000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x61);
++ } else if (freq_KHz <= 256000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x69);
++ } else if (freq_KHz <= 280000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x71);
++ } else { /* if (freq_KHz <= 304000) */
++ _mt_fe_tn_set_reg(state, 0x5c, 0x79);
++ }
++ if (freq_KHz <= 150000) {
++ _mt_fe_tn_set_reg(state, 0x5b, 0x28);
++ } else if (freq_KHz <= 256000) {
++ _mt_fe_tn_set_reg(state, 0x5b, 0x29);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x5b, 0x2a);
++ }
++ } else { /* if (freq_KHz > 304000) */
++ if (freq_KHz <= 400000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x89);
++ } else if (freq_KHz <= 450000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x91);
++ } else if (freq_KHz <= 650000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0x98);
++ } else if (freq_KHz <= 850000) {
++ _mt_fe_tn_set_reg(state, 0x5c, 0xa0);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x5c, 0xa8);
++ }
++ _mt_fe_tn_set_reg(state, 0x5b, 0x08);
++ }
++ }
++ } /* end of 0xE1 */
++ return 0;
++}
++
++static int _mt_fe_tn_cali_PLL_tc2800(struct m88dc2800_state *state,
++ u32 freq_KHz,
++ u32 cali_freq_thres_div2,
++ u32 cali_freq_thres_div3r,
++ u32 cali_freq_thres_div3)
++{
++ s32 N, F, MUL;
++ u8 buf, tmp, tmp2;
++ s32 M;
++ const s32 crystal_KHz = state->tuner_crystal;
++ if (state->tuner_mtt == 0xD1) {
++ M = state->tuner_crystal / 4000;
++ if (freq_KHz > cali_freq_thres_div2) {
++ MUL = 4;
++ tmp = 2;
++ } else if (freq_KHz > 300000) {
++ MUL = 8;
++ tmp = 3;
++ } else if (freq_KHz > (cali_freq_thres_div2 / 2)) {
++ MUL = 8;
++ tmp = 4;
++ } else if (freq_KHz > (cali_freq_thres_div2 / 4)) {
++ MUL = 16;
++ tmp = 5;
++ } else if (freq_KHz > (cali_freq_thres_div2 / 8)) {
++ MUL = 32;
++ tmp = 6;
++ } else if (freq_KHz > (cali_freq_thres_div2 / 16)) {
++ MUL = 64;
++ tmp = 7;
++ } else { /* invalid */
++ MUL = 0;
++ tmp = 0;
++ return 1;
++ }
++ } else if (state->tuner_mtt == 0xE1) {
++ M = state->tuner_crystal / 1000;
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_set_reg(state, 0x32, 0xe0);
++ _mt_fe_tn_set_reg(state, 0x33, 0x86);
++ _mt_fe_tn_set_reg(state, 0x37, 0x70);
++ _mt_fe_tn_set_reg(state, 0x38, 0x20);
++ _mt_fe_tn_set_reg(state, 0x39, 0x18);
++ _mt_fe_tn_set_reg(state, 0x89, 0x83);
++ if (freq_KHz > cali_freq_thres_div2) {
++ M = M / 4;
++ MUL = 4;
++ tmp = 2;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > cali_freq_thres_div3r) {
++ M = M / 3;
++ MUL = 6;
++ tmp = 2;
++ tmp2 = M + 32; /* 32 */
++ } else if (freq_KHz > cali_freq_thres_div3) {
++ M = M / 3;
++ MUL = 6;
++ tmp = 2;
++ tmp2 = M; /* 16 */
++ } else if (freq_KHz > 304000) {
++ M = M / 4;
++ MUL = 8;
++ tmp = 3;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > (cali_freq_thres_div2 / 2)) {
++ M = M / 4;
++ MUL = 8;
++ tmp = 4;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > (cali_freq_thres_div3r / 2)) {
++ M = M / 3;
++ MUL = 12;
++ tmp = 4;
++ tmp2 = M + 32; /* 32 */
++ } else if (freq_KHz > (cali_freq_thres_div3 / 2)) {
++ M = M / 3;
++ MUL = 12;
++ tmp = 4;
++ tmp2 = M; /* 16 */
++ } else if (freq_KHz > (cali_freq_thres_div2 / 4)) {
++ M = M / 4;
++ MUL = 16;
++ tmp = 5;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > (cali_freq_thres_div3r / 4)) {
++ M = M / 3;
++ MUL = 24;
++ tmp = 5;
++ tmp2 = M + 32; /* 32 */
++ } else if (freq_KHz > (cali_freq_thres_div3 / 4)) {
++ M = M / 3;
++ MUL = 24;
++ tmp = 5;
++ tmp2 = M; /* 16 */
++ } else if (freq_KHz > (cali_freq_thres_div2 / 8)) {
++ M = M / 4;
++ MUL = 32;
++ tmp = 6;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > (cali_freq_thres_div3r / 8)) {
++ M = M / 3;
++ MUL = 48;
++ tmp = 6;
++ tmp2 = M + 32; /* 32 */
++ } else if (freq_KHz > (cali_freq_thres_div3 / 8)) {
++ M = M / 3;
++ MUL = 48;
++ tmp = 6;
++ tmp2 = M; /* 16 */
++ } else if (freq_KHz > (cali_freq_thres_div2 / 16)) {
++ M = M / 4;
++ MUL = 64;
++ tmp = 7;
++ tmp2 = M + 16; /* 48 */
++ } else if (freq_KHz > (cali_freq_thres_div3r / 16)) {
++ M = M / 3;
++ MUL = 96;
++ tmp = 7;
++ tmp2 = M + 32; /* 32 */
++ } else if (freq_KHz > (cali_freq_thres_div3 / 16)) {
++ M = M / 3;
++ MUL = 96;
++ tmp = 7;
++ tmp2 = M; /* 16 */
++ } else { /* invalid */
++ M = M / 4;
++ MUL = 0;
++ tmp = 0;
++ tmp2 = 48;
++ return 1;
++ }
++ if (freq_KHz == 291000) {
++ M = state->tuner_crystal / 1000 / 3;
++ MUL = 12;
++ tmp = 4;
++ tmp2 = M + 32; /* 32 */
++ }
++ /*
++ if (freq_KHz == 578000) {
++ M = state->tuner_crystal / 1000 / 4;
++ MUL = 4;
++ tmp = 2;
++ tmp2 = M + 16; // 48
++ }
++ */
++ if (freq_KHz == 690000) {
++ M = state->tuner_crystal / 1000 / 3;
++ MUL = 4;
++ tmp = 2;
++ tmp2 = M + 16; /* 48 */
++ }
++ _mt_fe_tn_get_reg(state, 0x33, &buf);
++ buf &= 0xc0;
++ buf += tmp2;
++ _mt_fe_tn_set_reg(state, 0x33, buf);
++ } else {
++ return 1;
++ }
++ _mt_fe_tn_get_reg(state, 0x39, &buf);
++ buf &= 0xf8;
++ buf += tmp;
++ _mt_fe_tn_set_reg(state, 0x39, buf);
++ N = (freq_KHz * MUL * M / crystal_KHz) / 2 * 2 - 256;
++ buf = (N >> 8) & 0xcf;
++ if (state->tuner_mtt == 0xE1) {
++ buf |= 0x30;
++ }
++ _mt_fe_tn_set_reg(state, 0x34, buf);
++ buf = N & 0xff;
++ _mt_fe_tn_set_reg(state, 0x35, buf);
++ F = ((freq_KHz * MUL * M / (crystal_KHz / 1000) / 2) -
++ (freq_KHz * MUL * M / crystal_KHz / 2 * 1000)) * 64 / 1000;
++ buf = F & 0xff;
++ _mt_fe_tn_set_reg(state, 0x36, buf);
++ if (F == 0) {
++ if (state->tuner_mtt == 0xD1) {
++ _mt_fe_tn_set_reg(state, 0x3d, 0xca);
++ } else if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_set_reg(state, 0x3d, 0xfe);
++ } else {
++ return 1;
++ }
++ _mt_fe_tn_set_reg(state, 0x3e, 0x9c);
++ _mt_fe_tn_set_reg(state, 0x3f, 0x34);
++ }
++ if (F > 0) {
++ if (state->tuner_mtt == 0xD1) {
++ if ((F == 32) || (F == 16) || (F == 48)) {
++ _mt_fe_tn_set_reg(state, 0x3e, 0xa4);
++ _mt_fe_tn_set_reg(state, 0x3d, 0x4a);
++ _mt_fe_tn_set_reg(state, 0x3f, 0x36);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x3e, 0xa4);
++ _mt_fe_tn_set_reg(state, 0x3d, 0x4a);
++ _mt_fe_tn_set_reg(state, 0x3f, 0x36);
++ }
++ } else if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_set_reg(state, 0x3e, 0xa4);
++ _mt_fe_tn_set_reg(state, 0x3d, 0x7e);
++ _mt_fe_tn_set_reg(state, 0x3f, 0x36);
++ _mt_fe_tn_set_reg(state, 0x89, 0x84);
++ _mt_fe_tn_get_reg(state, 0x39, &buf);
++ buf = buf & 0x1f;
++ _mt_fe_tn_set_reg(state, 0x39, buf);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf | 0x02;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ } else {
++ return 1;
++ }
++ }
++ _mt_fe_tn_set_reg(state, 0x41, 0x00);
++ if (state->tuner_mtt == 0xD1) {
++ msleep(5);
++ } else if (state->tuner_mtt == 0xE1) {
++ msleep(2);
++ } else {
++ return 1;
++ }
++ _mt_fe_tn_set_reg(state, 0x41, 0x02);
++ _mt_fe_tn_set_reg(state, 0x30, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_set_reg(state, 0x31, 0x80);
++ _mt_fe_tn_set_reg(state, 0x31, 0x00);
++
++ return 0;
++}
++
++static int _mt_fe_tn_set_PLL_freq_tc2800(struct m88dc2800_state *state)
++{
++ u8 buf, buf1;
++ u32 freq_thres_div2_KHz, freq_thres_div3r_KHz,
++ freq_thres_div3_KHz;
++ const u32 freq_KHz = state->tuner_freq;
++ if (state->tuner_mtt == 0xD1) {
++ _mt_fe_tn_set_reg(state, 0x32, 0xe1);
++ _mt_fe_tn_set_reg(state, 0x33, 0xa6);
++ _mt_fe_tn_set_reg(state, 0x37, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x38, 0x20);
++ _mt_fe_tn_set_reg(state, 0x39, 0x18);
++ _mt_fe_tn_set_reg(state, 0x40, 0x40);
++ freq_thres_div2_KHz = 520000;
++ _mt_fe_tn_cali_PLL_tc2800(state, freq_KHz,
++ freq_thres_div2_KHz, 0, 0);
++ msleep(5);
++ _mt_fe_tn_get_reg(state, 0x3a, &buf);
++ buf1 = buf;
++ buf = buf & 0x03;
++ buf1 = buf1 & 0x01;
++ if ((buf1 == 0) || (buf == 3)) {
++ freq_thres_div2_KHz = 420000;
++ _mt_fe_tn_cali_PLL_tc2800(state, freq_KHz,
++ freq_thres_div2_KHz, 0,
++ 0);
++ msleep(5);
++ _mt_fe_tn_get_reg(state, 0x3a, &buf);
++ buf = buf & 0x07;
++ if (buf == 5) {
++ freq_thres_div2_KHz = 520000;
++ _mt_fe_tn_cali_PLL_tc2800(state, freq_KHz,
++ freq_thres_div2_KHz,
++ 0, 0);
++ msleep(5);
++ }
++ }
++ _mt_fe_tn_get_reg(state, 0x38, &buf);
++ _mt_fe_tn_set_reg(state, 0x38, buf);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf | 0x10;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x30, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf & 0xdf;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x40, 0x0);
++ _mt_fe_tn_set_reg(state, 0x30, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_set_reg(state, 0x31, 0x80);
++ _mt_fe_tn_set_reg(state, 0x31, 0x00);
++ msleep(5);
++ _mt_fe_tn_get_reg(state, 0x39, &buf);
++ buf = buf >> 5;
++ if (buf < 5) {
++ _mt_fe_tn_get_reg(state, 0x39, &buf);
++ buf = buf | 0xa0;
++ buf = buf & 0xbf;
++ _mt_fe_tn_set_reg(state, 0x39, buf);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf | 0x02;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ }
++ _mt_fe_tn_get_reg(state, 0x37, &buf);
++ if (buf > 0x70) {
++ buf = 0x7f;
++ _mt_fe_tn_set_reg(state, 0x40, 0x40);
++ }
++ _mt_fe_tn_set_reg(state, 0x37, buf);
++ _mt_fe_tn_get_reg(state, 0x38, &buf);
++ if (buf < 0x0f) {
++ buf = (buf & 0x0f) << 2;
++ buf = buf + 0x0f;
++ _mt_fe_tn_set_reg(state, 0x37, buf);
++ } else if (buf < 0x1f) {
++ buf = buf + 0x0f;
++ _mt_fe_tn_set_reg(state, 0x37, buf);
++ }
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = (buf | 0x20) & 0xef;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x41, 0x00);
++ msleep(5);
++ _mt_fe_tn_set_reg(state, 0x41, 0x02);
++ } else if (state->tuner_mtt == 0xE1) {
++ freq_thres_div2_KHz = 580000;
++ freq_thres_div3r_KHz = 500000;
++ freq_thres_div3_KHz = 440000;
++ _mt_fe_tn_cali_PLL_tc2800(state, freq_KHz,
++ freq_thres_div2_KHz,
++ freq_thres_div3r_KHz,
++ freq_thres_div3_KHz);
++ msleep(3);
++ _mt_fe_tn_get_reg(state, 0x38, &buf);
++ _mt_fe_tn_set_reg(state, 0x38, buf);
++ _mt_fe_tn_set_reg(state, 0x30, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_set_reg(state, 0x31, 0x80);
++ _mt_fe_tn_set_reg(state, 0x31, 0x00);
++ msleep(3);
++ _mt_fe_tn_get_reg(state, 0x38, &buf);
++ _mt_fe_tn_set_reg(state, 0x38, buf);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf | 0x10;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x30, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = buf & 0xdf;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x31, 0x80);
++ _mt_fe_tn_set_reg(state, 0x31, 0x00);
++ msleep(3);
++ _mt_fe_tn_get_reg(state, 0x37, &buf);
++ _mt_fe_tn_set_reg(state, 0x37, buf);
++ /*
++ if ((freq_KHz == 802000) || (freq_KHz == 826000)) {
++ _mt_fe_tn_set_reg(state, 0x37, 0x5e);
++ }
++ */
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = (buf & 0xef) | 0x30;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ _mt_fe_tn_set_reg(state, 0x41, 0x00);
++ msleep(2);
++ _mt_fe_tn_set_reg(state, 0x41, 0x02);
++ } else {
++ return 1;
++ }
++ return 0;
++}
++
++static int _mt_fe_tn_set_BB_tc2800(struct m88dc2800_state *state)
++{
++ return 0;
++}
++
++ static int _mt_fe_tn_set_appendix_tc2800(struct m88dc2800_state *state)
++
++{
++ u8 buf;
++ const u32 freq_KHz = state->tuner_freq;
++ if (state->tuner_mtt == 0xD1) {
++ if ((freq_KHz == 123000) || (freq_KHz == 147000) ||
++ (freq_KHz == 171000) || (freq_KHz == 195000)) {
++ _mt_fe_tn_set_reg(state, 0x20, 0x1b);
++ }
++ if ((freq_KHz == 371000) || (freq_KHz == 419000) ||
++ (freq_KHz == 610000) || (freq_KHz == 730000) ||
++ (freq_KHz == 754000) || (freq_KHz == 826000)) {
++ _mt_fe_tn_get_reg(state, 0x0d, &buf);
++ _mt_fe_tn_set_reg(state, 0x0d, (u8) (buf + 1));
++ }
++ if ((freq_KHz == 522000) || (freq_KHz == 578000) ||
++ (freq_KHz == 634000) || (freq_KHz == 690000) ||
++ (freq_KHz == 834000)) {
++ _mt_fe_tn_get_reg(state, 0x0d, &buf);
++ _mt_fe_tn_set_reg(state, 0x0d, (u8) (buf - 1));
++ }
++ } else if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_set_reg(state, 0x20, 0xfc);
++ if (freq_KHz == 123000 || freq_KHz == 147000 ||
++ freq_KHz == 171000 || freq_KHz == 195000 ||
++ freq_KHz == 219000 || freq_KHz == 267000 ||
++ freq_KHz == 291000 || freq_KHz == 339000 ||
++ freq_KHz == 387000 || freq_KHz == 435000 ||
++ freq_KHz == 482000 || freq_KHz == 530000 ||
++ freq_KHz == 722000 ||
++ (state->tuner_custom_cfg == 1 && freq_KHz == 315000)) {
++ _mt_fe_tn_set_reg(state, 0x20, 0x5c);
++ }
++ }
++ return 0;
++}
++
++ static int _mt_fe_tn_set_DAC_tc2800(struct m88dc2800_state *state)
++{
++ u8 buf, tempnumber;
++ s32 N;
++ s32 f1f2number, f1, f2, delta1, Totalnum1;
++ s32 cntT, cntin, NCOI, z0, z1, z2, tmp;
++ u32 fc, fadc, fsd, f2d;
++ u32 FreqTrue108_Hz;
++ s32 M = state->tuner_crystal / 4000;
++ /* const u8 bandwidth = state->tuner_bandwidth; */
++ const u16 DAC_fre = 108;
++ const u32 crystal_KHz = state->tuner_crystal;
++ const u32 DACFreq_KHz = state->tuner_dac;
++ const u32 freq_KHz = state->tuner_freq;
++
++ if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_get_reg(state, 0x33, &buf);
++ M = buf & 0x0f;
++ if (M == 0)
++ M = 6;
++ }
++ _mt_fe_tn_get_reg(state, 0x34, &buf);
++ N = buf & 0x07;
++ _mt_fe_tn_get_reg(state, 0x35, &buf);
++ N = (N << 8) + buf;
++ buf = ((N + 256) * crystal_KHz / M / DAC_fre + 500) / 1000;
++ if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_set_appendix_tc2800(state);
++ if (freq_KHz == 187000 || freq_KHz == 195000 ||
++ freq_KHz == 131000 || freq_KHz == 211000 ||
++ freq_KHz == 219000 || freq_KHz == 227000 ||
++ freq_KHz == 267000 || freq_KHz == 299000 ||
++ freq_KHz == 347000 || freq_KHz == 363000 ||
++ freq_KHz == 395000 || freq_KHz == 403000 ||
++ freq_KHz == 435000 || freq_KHz == 482000 ||
++ freq_KHz == 474000 || freq_KHz == 490000 ||
++ freq_KHz == 610000 || freq_KHz == 642000 ||
++ freq_KHz == 666000 || freq_KHz == 722000 ||
++ freq_KHz == 754000 ||
++ ((freq_KHz == 379000 || freq_KHz == 467000 ||
++ freq_KHz == 762000) && state->tuner_custom_cfg != 1)) {
++ buf = buf + 1;
++ }
++ if (freq_KHz == 123000 || freq_KHz == 139000 ||
++ freq_KHz == 147000 || freq_KHz == 171000 ||
++ freq_KHz == 179000 || freq_KHz == 203000 ||
++ freq_KHz == 235000 || freq_KHz == 251000 ||
++ freq_KHz == 259000 || freq_KHz == 283000 ||
++ freq_KHz == 331000 || freq_KHz == 363000 ||
++ freq_KHz == 371000 || freq_KHz == 387000 ||
++ freq_KHz == 411000 || freq_KHz == 427000 ||
++ freq_KHz == 443000 || freq_KHz == 451000 ||
++ freq_KHz == 459000 || freq_KHz == 506000 ||
++ freq_KHz == 514000 || freq_KHz == 538000 ||
++ freq_KHz == 546000 || freq_KHz == 554000 ||
++ freq_KHz == 562000 || freq_KHz == 570000 ||
++ freq_KHz == 578000 || freq_KHz == 602000 ||
++ freq_KHz == 626000 || freq_KHz == 658000 ||
++ freq_KHz == 690000 || freq_KHz == 714000 ||
++ freq_KHz == 746000 || freq_KHz == 522000 ||
++ freq_KHz == 826000 || freq_KHz == 155000 ||
++ freq_KHz == 530000 ||
++ ((freq_KHz == 275000 || freq_KHz == 355000) &&
++ state->tuner_custom_cfg != 1) ||
++ ((freq_KHz == 467000 || freq_KHz == 762000 ||
++ freq_KHz == 778000 || freq_KHz == 818000) &&
++ state->tuner_custom_cfg == 1)) {
++ buf = buf - 1;
++ }
++ }
++ _mt_fe_tn_set_reg(state, 0x0e, buf);
++ _mt_fe_tn_set_reg(state, 0x0d, buf);
++ f1f2number =
++ (((DACFreq_KHz * M * buf) / crystal_KHz) << 16) / (N + 256) +
++ (((DACFreq_KHz * M * buf) % crystal_KHz) << 16) / ((N + 256) *
++ crystal_KHz);
++ _mt_fe_tn_set_reg(state, 0xf1, (f1f2number & 0xff00) >> 8);
++ _mt_fe_tn_set_reg(state, 0xf2, f1f2number & 0x00ff);
++ FreqTrue108_Hz =
++ (N + 256) * crystal_KHz / (M * buf) * 1000 +
++ (((N + 256) * crystal_KHz) % (M * buf)) * 1000 / (M * buf);
++ f1 = 4096;
++ fc = FreqTrue108_Hz;
++ fadc = fc / 4;
++ fsd = 27000000;
++ f2d = state->tuner_bandwidth * 1000 / 2 - 150;
++ f2 = (fsd / 250) * f2d / ((fc + 500) / 1000);
++ delta1 = ((f1 - f2) << 15) / f2;
++ Totalnum1 = ((f1 - f2) << 15) - delta1 * f2;
++ cntT = f2;
++ cntin = Totalnum1;
++ NCOI = delta1;
++ z0 = cntin;
++ z1 = cntT;
++ z2 = NCOI;
++ tempnumber = (z0 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xc9, (u8) (tempnumber & 0x0f));
++ tempnumber = (z0 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xca, tempnumber);
++ tempnumber = (z1 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xcb, tempnumber);
++ tempnumber = (z1 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xcc, tempnumber);
++ tempnumber = (z2 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xcd, tempnumber);
++ tempnumber = (z2 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xce, tempnumber);
++ tmp = f1;
++ f1 = f2;
++ f2 = tmp / 2;
++ delta1 = ((f1 - f2) << 15) / f2;
++ Totalnum1 = ((f1 - f2) << 15) - delta1 * f2;
++ NCOI = (f1 << 15) / f2 - (1 << 15);
++ cntT = f2;
++ cntin = Totalnum1;
++ z0 = cntin;
++ z1 = cntT;
++ z2 = NCOI;
++ tempnumber = (z0 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xd9, (u8) (tempnumber & 0x0f));
++ tempnumber = (z0 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xda, tempnumber);
++ tempnumber = (z1 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xdb, tempnumber);
++ tempnumber = (z1 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xdc, tempnumber);
++ tempnumber = (z2 & 0xff00) >> 8;
++ _mt_fe_tn_set_reg(state, 0xdd, tempnumber);
++ tempnumber = (z2 & 0xff);
++ _mt_fe_tn_set_reg(state, 0xde, tempnumber);
++
++ return 0;
++}
++
++static int _mt_fe_tn_preset_tc2800(struct m88dc2800_state *state)
++{
++ if (state->tuner_mtt == 0xD1) {
++ _mt_fe_tn_set_reg(state, 0x19, 0x4a);
++ _mt_fe_tn_set_reg(state, 0x1b, 0x4b);
++ _mt_fe_tn_set_reg(state, 0x04, 0x04);
++ _mt_fe_tn_set_reg(state, 0x17, 0x0d);
++ _mt_fe_tn_set_reg(state, 0x62, 0x6c);
++ _mt_fe_tn_set_reg(state, 0x63, 0xf4);
++ _mt_fe_tn_set_reg(state, 0x1f, 0x0e);
++ _mt_fe_tn_set_reg(state, 0x6b, 0xf4);
++ _mt_fe_tn_set_reg(state, 0x14, 0x01);
++ _mt_fe_tn_set_reg(state, 0x5a, 0x75);
++ _mt_fe_tn_set_reg(state, 0x66, 0x74);
++ _mt_fe_tn_set_reg(state, 0x72, 0xe0);
++ _mt_fe_tn_set_reg(state, 0x70, 0x07);
++ _mt_fe_tn_set_reg(state, 0x15, 0x7b);
++ _mt_fe_tn_set_reg(state, 0x55, 0x71);
++ _mt_fe_tn_set_reg(state, 0x75, 0x55);
++ _mt_fe_tn_set_reg(state, 0x76, 0xac);
++ _mt_fe_tn_set_reg(state, 0x77, 0x6c);
++ _mt_fe_tn_set_reg(state, 0x78, 0x8b);
++ _mt_fe_tn_set_reg(state, 0x79, 0x42);
++ _mt_fe_tn_set_reg(state, 0x7a, 0xd2);
++ _mt_fe_tn_set_reg(state, 0x81, 0x01);
++ _mt_fe_tn_set_reg(state, 0x82, 0x00);
++ _mt_fe_tn_set_reg(state, 0x82, 0x02);
++ _mt_fe_tn_set_reg(state, 0x82, 0x04);
++ _mt_fe_tn_set_reg(state, 0x82, 0x06);
++ _mt_fe_tn_set_reg(state, 0x82, 0x08);
++ _mt_fe_tn_set_reg(state, 0x82, 0x09);
++ _mt_fe_tn_set_reg(state, 0x82, 0x29);
++ _mt_fe_tn_set_reg(state, 0x82, 0x49);
++ _mt_fe_tn_set_reg(state, 0x82, 0x58);
++ _mt_fe_tn_set_reg(state, 0x82, 0x59);
++ _mt_fe_tn_set_reg(state, 0x82, 0x98);
++ _mt_fe_tn_set_reg(state, 0x82, 0x99);
++ _mt_fe_tn_set_reg(state, 0x10, 0x05);
++ _mt_fe_tn_set_reg(state, 0x10, 0x0d);
++ _mt_fe_tn_set_reg(state, 0x11, 0x95);
++ _mt_fe_tn_set_reg(state, 0x11, 0x9d);
++ if (state->tuner_loopthrough != 0) {
++ _mt_fe_tn_set_reg(state, 0x67, 0x25);
++ } else {
++ _mt_fe_tn_set_reg(state, 0x67, 0x05);
++ }
++ } else if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_set_reg(state, 0x1b, 0x47);
++ if (state->tuner_mode == 0) { /* DVB-C */
++ _mt_fe_tn_set_reg(state, 0x66, 0x74);
++ _mt_fe_tn_set_reg(state, 0x62, 0x2c);
++ _mt_fe_tn_set_reg(state, 0x63, 0x54);
++ _mt_fe_tn_set_reg(state, 0x68, 0x0b);
++ _mt_fe_tn_set_reg(state, 0x14, 0x00);
++ } else { /* CTTB */
++ _mt_fe_tn_set_reg(state, 0x66, 0x74);
++ _mt_fe_tn_set_reg(state, 0x62, 0x0c);
++ _mt_fe_tn_set_reg(state, 0x63, 0x54);
++ _mt_fe_tn_set_reg(state, 0x68, 0x0b);
++ _mt_fe_tn_set_reg(state, 0x14, 0x05);
++ }
++ _mt_fe_tn_set_reg(state, 0x6f, 0x00);
++ _mt_fe_tn_set_reg(state, 0x84, 0x04);
++ _mt_fe_tn_set_reg(state, 0x5e, 0xbe);
++ _mt_fe_tn_set_reg(state, 0x87, 0x07);
++ _mt_fe_tn_set_reg(state, 0x8a, 0x1f);
++ _mt_fe_tn_set_reg(state, 0x8b, 0x1f);
++ _mt_fe_tn_set_reg(state, 0x88, 0x30);
++ _mt_fe_tn_set_reg(state, 0x58, 0x34);
++ _mt_fe_tn_set_reg(state, 0x61, 0x8c);
++ _mt_fe_tn_set_reg(state, 0x6a, 0x42);
++ }
++ return 0;
++}
++
++static int mt_fe_tn_wakeup_tc2800(struct m88dc2800_state *state)
++{
++ _mt_fe_tn_set_reg(state, 0x16, 0xb1);
++ _mt_fe_tn_set_reg(state, 0x09, 0x7d);
++ return 0;
++}
++
++ static int mt_fe_tn_sleep_tc2800(struct m88dc2800_state *state)
++{
++ _mt_fe_tn_set_reg(state, 0x16, 0xb0);
++ _mt_fe_tn_set_reg(state, 0x09, 0x6d);
++ return 0;
++}
++
++ static int mt_fe_tn_init_tc2800(struct m88dc2800_state *state)
++{
++ if (state->tuner_init_OK != 1) {
++ state->tuner_dev_addr = 0x61; /* TUNER_I2C_ADDR_TC2800 */
++ state->tuner_freq = 650000;
++ state->tuner_qam = 0;
++ state->tuner_mode = 0; // 0: DVB-C, 1: CTTB
++ state->tuner_bandwidth = 8;
++ state->tuner_loopthrough = 0;
++ state->tuner_crystal = 24000;
++ state->tuner_dac = 7200;
++ state->tuner_mtt = 0x00;
++ state->tuner_custom_cfg = 0;
++ state->tuner_version = 30022; /* Driver version number */
++ state->tuner_time = 12092611;
++ state->tuner_init_OK = 1;
++ }
++ _mt_fe_tn_set_reg(state, 0x2b, 0x46);
++ _mt_fe_tn_set_reg(state, 0x2c, 0x75);
++ if (state->tuner_mtt == 0x00) {
++ u8 tmp = 0;
++ _mt_fe_tn_get_reg(state, 0x01, &tmp);
++ printk(KERN_INFO "m88dc2800: tuner id = 0x%02x ", tmp);
++ switch (tmp) {
++ case 0x0d:
++ state->tuner_mtt = 0xD1;
++ break;
++ case 0x8e:
++ default:
++ state->tuner_mtt = 0xE1;
++ break;
++ }
++ }
++ return 0;
++}
++
++ static int mt_fe_tn_set_freq_tc2800(struct m88dc2800_state *state,
++ u32 freq_KHz)
++{
++ u8 buf;
++ u8 buf1;
++
++ mt_fe_tn_init_tc2800(state);
++ state->tuner_freq = freq_KHz;
++ _mt_fe_tn_set_reg(state, 0x21, freq_KHz > 500000 ? 0xb9 : 0x99);
++ mt_fe_tn_wakeup_tc2800(state);
++ _mt_fe_tn_set_reg(state, 0x05, 0x7f);
++ _mt_fe_tn_set_reg(state, 0x06, 0xf8);
++ _mt_fe_tn_set_RF_front_tc2800(state);
++ _mt_fe_tn_set_PLL_freq_tc2800(state);
++ _mt_fe_tn_set_DAC_tc2800(state);
++ _mt_fe_tn_set_BB_tc2800(state);
++ _mt_fe_tn_preset_tc2800(state);
++ _mt_fe_tn_set_reg(state, 0x05, 0x00);
++ _mt_fe_tn_set_reg(state, 0x06, 0x00);
++ if (state->tuner_mtt == 0xD1) {
++ _mt_fe_tn_set_reg(state, 0x00, 0x01);
++ _mt_fe_tn_set_reg(state, 0x00, 0x00);
++ msleep(5);
++ _mt_fe_tn_set_reg(state, 0x41, 0x00);
++ msleep(5);
++ _mt_fe_tn_set_reg(state, 0x41, 0x02);
++
++ _mt_fe_tn_get_reg(state, 0x69, &buf1);
++ buf1 = buf1 & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x61, &buf);
++ buf = buf & 0x0f;
++ if (buf == 0x0c)
++ _mt_fe_tn_set_reg(state, 0x6a, 0x59);
++ if (buf1 > 0x02) {
++ if (freq_KHz > 600000)
++ _mt_fe_tn_set_reg(state, 0x66, 0x44);
++ else if (freq_KHz > 500000)
++ _mt_fe_tn_set_reg(state, 0x66, 0x64);
++ else
++ _mt_fe_tn_set_reg(state, 0x66, 0x74);
++ }
++ if (buf1 < 0x03) {
++ if (freq_KHz > 800000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x64);
++ else if (freq_KHz > 600000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ else if (freq_KHz > 500000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ else if (freq_KHz > 300000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x43);
++ else if (freq_KHz > 220000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ else if (freq_KHz > 110000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x14);
++ else
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ msleep(5);
++ } else if (buf < 0x0c) {
++ if (freq_KHz > 800000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x14);
++ else if (freq_KHz > 600000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x14);
++ else if (freq_KHz > 500000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x34);
++ else if (freq_KHz > 300000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x43);
++ else if (freq_KHz > 220000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ else if (freq_KHz > 110000)
++ _mt_fe_tn_set_reg(state, 0x87, 0x14);
++ else
++ _mt_fe_tn_set_reg(state, 0x87, 0x54);
++ msleep(5);
++ }
++ } else if ((state->tuner_mtt == 0xE1)) {
++ _mt_fe_tn_set_reg(state, 0x00, 0x01);
++ _mt_fe_tn_set_reg(state, 0x00, 0x00);
++ msleep(20);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = (buf & 0xef) | 0x28;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ msleep(50);
++ _mt_fe_tn_get_reg(state, 0x38, &buf);
++ _mt_fe_tn_set_reg(state, 0x38, buf);
++ _mt_fe_tn_get_reg(state, 0x32, &buf);
++ buf = (buf & 0xf7) | 0x10;
++ _mt_fe_tn_set_reg(state, 0x32, buf);
++ msleep(10);
++ _mt_fe_tn_get_reg(state, 0x69, &buf);
++ buf = buf & 0x03;
++ _mt_fe_tn_set_reg(state, 0x2a, buf);
++ if (buf > 0) {
++ msleep(20);
++ _mt_fe_tn_get_reg(state, 0x84, &buf);
++ buf = buf & 0x1f;
++ _mt_fe_tn_set_reg(state, 0x68, 0x0a);
++ _mt_fe_tn_get_reg(state, 0x88, &buf1);
++ buf1 = buf1 & 0x1f;
++ if (buf <= buf1)
++ _mt_fe_tn_set_reg(state, 0x66, 0x44);
++ else
++ _mt_fe_tn_set_reg(state, 0x66, 0x74);
++ } else {
++ if (freq_KHz <= 600000)
++ _mt_fe_tn_set_reg(state, 0x68, 0x0c);
++ else
++ _mt_fe_tn_set_reg(state, 0x68, 0x0e);
++ _mt_fe_tn_set_reg(state, 0x30, 0xfb);
++ _mt_fe_tn_set_reg(state, 0x30, 0xff);
++ _mt_fe_tn_set_reg(state, 0x31, 0x04);
++ _mt_fe_tn_set_reg(state, 0x31, 0x00);
++ }
++ if (state->tuner_loopthrough != 0) {
++ _mt_fe_tn_get_reg(state, 0x28, &buf);
++ if (buf == 0) {
++ _mt_fe_tn_set_reg(state, 0x28, 0xff);
++ _mt_fe_tn_get_reg(state, 0x61, &buf);
++ buf = buf & 0x0f;
++ if (buf > 9)
++ _mt_fe_tn_set_reg(state, 0x67, 0x74);
++ else if (buf > 6)
++ _mt_fe_tn_set_reg(state, 0x67, 0x64);
++ else if (buf > 3)
++ _mt_fe_tn_set_reg(state, 0x67, 0x54);
++ else
++ _mt_fe_tn_set_reg(state, 0x67, 0x44);
++ }
++ } else {
++ _mt_fe_tn_set_reg(state, 0x67, 0x34);
++ }
++ } else {
++ return 1;
++ }
++ return 0;
++}
++
++
++/*
++static int mt_fe_tn_set_BB_filter_band_tc2800(struct m88dc2800_state *state,
++ u8 bandwidth)
++{
++ u8 buf, tmp;
++
++ _mt_fe_tn_get_reg(state, 0x53, &tmp);
++
++ if (bandwidth == 6)
++ buf = 0x01 << 1;
++ else if (bandwidth == 7)
++ buf = 0x02 << 1;
++ else if (bandwidth == 8)
++ buf = 0x04 << 1;
++ else
++ buf = 0x04 << 1;
++
++ tmp &= 0xf1;
++ tmp |= buf;
++ _mt_fe_tn_set_reg(state, 0x53, tmp);
++ state->tuner_bandwidth = bandwidth;
++ return 0;
++}
++*/
++
++static s32 mt_fe_tn_get_signal_strength_tc2800(struct m88dc2800_state
++ *state)
++{
++ s32 level = -107;
++ s32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
++ s32 val1, val2, val;
++ s32 result2, result3, result4, result5, result6;
++ s32 append;
++ u8 tmp;
++ s32 freq_KHz = (s32) state->tuner_freq;
++ if (state->tuner_mtt == 0xD1) {
++ _mt_fe_tn_get_reg(state, 0x61, &tmp);
++ tmp1 = tmp & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x69, &tmp);
++ tmp2 = tmp & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x73, &tmp);
++ tmp3 = tmp & 0x07;
++ _mt_fe_tn_get_reg(state, 0x7c, &tmp);
++ tmp4 = (tmp >> 4) & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x7b, &tmp);
++ tmp5 = tmp & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x7f, &tmp);
++ tmp6 = (tmp >> 5) & 0x01;
++ if (tmp1 > 6) {
++ val1 = 0;
++ if (freq_KHz <= 200000) {
++ val2 = (tmp1 - 6) * 267;
++ } else if (freq_KHz <= 600000) {
++ val2 = (tmp1 - 6) * 280;
++ } else {
++ val2 = (tmp1 - 6) * 290;
++ }
++ val = val1 + val2;
++ } else {
++ if (tmp1 == 0) {
++ val1 = -550;
++ } else {
++ val1 = 0;
++ }
++ if ((tmp1 < 4) && (freq_KHz >= 506000)) {
++ val1 = -850;
++ }
++ val2 = 0;
++ val = val1 + val2;
++ }
++ if (freq_KHz <= 95000) {
++ result2 = tmp2 * 289;
++ } else if (freq_KHz <= 155000) {
++ result2 = tmp2 * 278;
++ } else if (freq_KHz <= 245000) {
++ result2 = tmp2 * 267;
++ } else if (freq_KHz <= 305000) {
++ result2 = tmp2 * 256;
++ } else if (freq_KHz <= 335000) {
++ result2 = tmp2 * 244;
++ } else if (freq_KHz <= 425000) {
++ result2 = tmp2 * 233;
++ } else if (freq_KHz <= 575000) {
++ result2 = tmp2 * 222;
++ } else if (freq_KHz <= 665000) {
++ result2 = tmp2 * 211;
++ } else {
++ result2 = tmp2 * 200;
++ }
++ result3 = (6 - tmp3) * 100;
++ result4 = 300 * tmp4;
++ result5 = 50 * tmp5;
++ result6 = 300 * tmp6;
++ if (freq_KHz < 105000) {
++ append = -450;
++ } else if (freq_KHz <= 227000) {
++ append = -4 * (freq_KHz / 1000 - 100) + 150;
++ } else if (freq_KHz <= 305000) {
++ append = -4 * (freq_KHz / 1000 - 100);
++ } else if (freq_KHz <= 419000) {
++ append = 500 - 40 * (freq_KHz / 1000 - 300) / 17 + 130;
++ } else if (freq_KHz <= 640000) {
++ append = 500 - 40 * (freq_KHz / 1000 - 300) / 17;
++ } else {
++ append = -500;
++ }
++ level = append - (val + result2 + result3 + result4 +
++ result5 + result6);
++ level /= 100;
++ } else if (state->tuner_mtt == 0xE1) {
++ _mt_fe_tn_get_reg(state, 0x61, &tmp);
++ tmp1 = tmp & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x84, &tmp);
++ tmp2 = tmp & 0x1f;
++ _mt_fe_tn_get_reg(state, 0x69, &tmp);
++ tmp3 = tmp & 0x03;
++ _mt_fe_tn_get_reg(state, 0x73, &tmp);
++ tmp4 = tmp & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x7c, &tmp);
++ tmp5 = (tmp >> 4) & 0x0f;
++ _mt_fe_tn_get_reg(state, 0x7b, &tmp);
++ tmp6 = tmp & 0x0f;
++ if (freq_KHz < 151000) {
++ result2 = (1150 - freq_KHz / 100) * 163 / 33 + 4230;
++ result3 = (1150 - freq_KHz / 100) * 115 / 33 + 1850;
++ result4 = -3676 * (freq_KHz / 1000) / 100 + 6115;
++ } else if (freq_KHz < 257000) {
++ result2 = (1540 - freq_KHz / 100) * 11 / 4 + 3870;
++ result3 = (1540 - freq_KHz / 100) * 205 / 96 + 2100;
++ result4 = -21 * freq_KHz / 1000 + 5084;
++ } else if (freq_KHz < 305000) {
++ result2 = (2620 - freq_KHz / 100) * 5 / 3 + 2770;
++ result3 = (2620 - freq_KHz / 100) * 10 / 7 + 1700;
++ result4 = 650;
++ } else if (freq_KHz < 449000) {
++ result2 = (307 - freq_KHz / 1000) * 82 / 27 + 11270;
++ result3 = (3100 - freq_KHz / 100) * 5 / 3 + 10000;
++ result4 = 134 * freq_KHz / 10000 + 11875;
++ } else {
++ result2 = (307 - freq_KHz / 1000) * 82 / 27 + 11270;
++ result3 = 8400;
++ result4 = 5300;
++ }
++ if (tmp1 > 6) {
++ val1 = result2;
++ val2 = 2900;
++ val = 500;
++ } else if (tmp1 > 0) {
++ val1 = result3;
++ val2 = 2700;
++ val = 500;
++ } else {
++ val1 = result4;
++ val2 = 2700;
++ val = 400;
++ }
++ level = val1 - (val2 * tmp1 + 500 * tmp2 + 3000 * tmp3 -
++ 500 * tmp4 + 3000 * tmp5 + val * tmp6) - 1000;
++ level /= 1000;
++ }
++ return level;
++}
++
++
++/* m88dc2800 operation functions */
++u8 M88DC2000GetLock(struct m88dc2800_state * state)
++{
++ u8 u8ret = 0;
++ if (ReadReg(state, 0x80) < 0x06) {
++ if ((ReadReg(state, 0xdf) & 0x80) == 0x80
++ &&(ReadReg(state, 0x91) & 0x23) == 0x03
++ &&(ReadReg(state, 0x43) & 0x08) == 0x08)
++ u8ret = 1;
++ else
++ u8ret = 0;
++ } else {
++ if ((ReadReg(state, 0x85) & 0x08) == 0x08)
++ u8ret = 1;
++ else
++ u8ret = 0;
++ }
++ dprintk("%s, lock=%d\n", __func__, u8ret);
++ return u8ret;
++}
++
++static int M88DC2000SetTsType(struct m88dc2800_state *state, u8 type)
++{
++ u8 regC2H;
++
++ if (type == 3) {
++ WriteReg(state, 0x84, 0x6A);
++ WriteReg(state, 0xC0, 0x43);
++ WriteReg(state, 0xE2, 0x06);
++ regC2H = ReadReg(state, 0xC2);
++ regC2H &= 0xC0;
++ regC2H |= 0x1B;
++ WriteReg(state, 0xC2, regC2H);
++ WriteReg(state, 0xC1, 0x60); /* common interface */
++ } else if (type == 1) {
++ WriteReg(state, 0x84, 0x6A);
++ WriteReg(state, 0xC0, 0x47); /* serial format */
++ WriteReg(state, 0xE2, 0x02);
++ regC2H = ReadReg(state, 0xC2);
++ regC2H &= 0xC7;
++ WriteReg(state, 0xC2, regC2H);
++ WriteReg(state, 0xC1, 0x00);
++ } else {
++ WriteReg(state, 0x84, 0x6C);
++ WriteReg(state, 0xC0, 0x43); /* parallel format */
++ WriteReg(state, 0xE2, 0x06);
++ regC2H = ReadReg(state, 0xC2);
++ regC2H &= 0xC7;
++ WriteReg(state, 0xC2, regC2H);
++ WriteReg(state, 0xC1, 0x00);
++ }
++ return 0;
++}
++
++static int M88DC2000RegInitial_TC2800(struct m88dc2800_state *state)
++{
++ u8 RegE3H, RegE4H;
++
++ WriteReg(state, 0x00, 0x48);
++ WriteReg(state, 0x01, 0x09);
++ WriteReg(state, 0xFB, 0x0A);
++ WriteReg(state, 0xFC, 0x0B);
++ WriteReg(state, 0x02, 0x0B);
++ WriteReg(state, 0x03, 0x18);
++ WriteReg(state, 0x05, 0x0D);
++ WriteReg(state, 0x36, 0x80);
++ WriteReg(state, 0x43, 0x40);
++ WriteReg(state, 0x55, 0x7A);
++ WriteReg(state, 0x56, 0xD9);
++ WriteReg(state, 0x57, 0xDF);
++ WriteReg(state, 0x58, 0x39);
++ WriteReg(state, 0x5A, 0x00);
++ WriteReg(state, 0x5C, 0x71);
++ WriteReg(state, 0x5D, 0x23);
++ WriteReg(state, 0x86, 0x40);
++ WriteReg(state, 0xF9, 0x08);
++ WriteReg(state, 0x61, 0x40);
++ WriteReg(state, 0x62, 0x0A);
++ WriteReg(state, 0x90, 0x06);
++ WriteReg(state, 0xDE, 0x00);
++ WriteReg(state, 0xA0, 0x03);
++ WriteReg(state, 0xDF, 0x81);
++ WriteReg(state, 0xFA, 0x40);
++ WriteReg(state, 0x37, 0x10);
++ WriteReg(state, 0xF0, 0x40);
++ WriteReg(state, 0xF2, 0x9C);
++ WriteReg(state, 0xF3, 0x40);
++ RegE3H = ReadReg(state, 0xE3);
++ RegE4H = ReadReg(state, 0xE4);
++ if (((RegE3H & 0xC0) == 0x00) && ((RegE4H & 0xC0) == 0x00)) {
++ WriteReg(state, 0x30, 0xFF);
++ WriteReg(state, 0x31, 0x00);
++ WriteReg(state, 0x32, 0x00);
++ WriteReg(state, 0x33, 0x00);
++ WriteReg(state, 0x35, 0x32);
++ WriteReg(state, 0x40, 0x00);
++ WriteReg(state, 0x41, 0x10);
++ WriteReg(state, 0xF1, 0x02);
++ WriteReg(state, 0xF4, 0x04);
++ WriteReg(state, 0xF5, 0x00);
++ WriteReg(state, 0x42, 0x14);
++ WriteReg(state, 0xE1, 0x25);
++ } else if (((RegE3H & 0xC0) == 0x80) && ((RegE4H & 0xC0) == 0x40)) {
++ WriteReg(state, 0x30, 0xFF);
++ WriteReg(state, 0x31, 0x00);
++ WriteReg(state, 0x32, 0x00);
++ WriteReg(state, 0x33, 0x00);
++ WriteReg(state, 0x35, 0x32);
++ WriteReg(state, 0x39, 0x00);
++ WriteReg(state, 0x3A, 0x00);
++ WriteReg(state, 0x40, 0x00);
++ WriteReg(state, 0x41, 0x10);
++ WriteReg(state, 0xF1, 0x00);
++ WriteReg(state, 0xF4, 0x00);
++ WriteReg(state, 0xF5, 0x40);
++ WriteReg(state, 0x42, 0x14);
++ WriteReg(state, 0xE1, 0x25);
++ } else if ((RegE3H == 0x80 || RegE3H == 0x81)
++ && (RegE4H == 0x80 || RegE4H == 0x81)) {
++ WriteReg(state, 0x30, 0xFF);
++ WriteReg(state, 0x31, 0x00);
++ WriteReg(state, 0x32, 0x00);
++ WriteReg(state, 0x33, 0x00);
++ WriteReg(state, 0x35, 0x32);
++ WriteReg(state, 0x39, 0x00);
++ WriteReg(state, 0x3A, 0x00);
++ WriteReg(state, 0xF1, 0x00);
++ WriteReg(state, 0xF4, 0x00);
++ WriteReg(state, 0xF5, 0x40);
++ WriteReg(state, 0x42, 0x24);
++ WriteReg(state, 0xE1, 0x25);
++ WriteReg(state, 0x92, 0x7F);
++ WriteReg(state, 0x93, 0x91);
++ WriteReg(state, 0x95, 0x00);
++ WriteReg(state, 0x2B, 0x33);
++ WriteReg(state, 0x2A, 0x2A);
++ WriteReg(state, 0x2E, 0x80);
++ WriteReg(state, 0x25, 0x25);
++ WriteReg(state, 0x2D, 0xFF);
++ WriteReg(state, 0x26, 0xFF);
++ WriteReg(state, 0x27, 0x00);
++ WriteReg(state, 0x24, 0x25);
++ WriteReg(state, 0xA4, 0xFF);
++ WriteReg(state, 0xA3, 0x0D);
++ } else {
++ WriteReg(state, 0x30, 0xFF);
++ WriteReg(state, 0x31, 0x00);
++ WriteReg(state, 0x32, 0x00);
++ WriteReg(state, 0x33, 0x00);
++ WriteReg(state, 0x35, 0x32);
++ WriteReg(state, 0x39, 0x00);
++ WriteReg(state, 0x3A, 0x00);
++ WriteReg(state, 0xF1, 0x00);
++ WriteReg(state, 0xF4, 0x00);
++ WriteReg(state, 0xF5, 0x40);
++ WriteReg(state, 0x42, 0x24);
++ WriteReg(state, 0xE1, 0x27);
++ WriteReg(state, 0x92, 0x7F);
++ WriteReg(state, 0x93, 0x91);
++ WriteReg(state, 0x95, 0x00);
++ WriteReg(state, 0x2B, 0x33);
++ WriteReg(state, 0x2A, 0x2A);
++ WriteReg(state, 0x2E, 0x80);
++ WriteReg(state, 0x25, 0x25);
++ WriteReg(state, 0x2D, 0xFF);
++ WriteReg(state, 0x26, 0xFF);
++ WriteReg(state, 0x27, 0x00);
++ WriteReg(state, 0x24, 0x25);
++ WriteReg(state, 0xA4, 0xFF);
++ WriteReg(state, 0xA3, 0x10);
++ }
++ WriteReg(state, 0xF6, 0x4E);
++ WriteReg(state, 0xF7, 0x20);
++ WriteReg(state, 0x89, 0x02);
++ WriteReg(state, 0x14, 0x08);
++ WriteReg(state, 0x6F, 0x0D);
++ WriteReg(state, 0x10, 0xFF);
++ WriteReg(state, 0x11, 0x00);
++ WriteReg(state, 0x12, 0x30);
++ WriteReg(state, 0x13, 0x23);
++ WriteReg(state, 0x60, 0x00);
++ WriteReg(state, 0x69, 0x00);
++ WriteReg(state, 0x6A, 0x03);
++ WriteReg(state, 0xE0, 0x75);
++ WriteReg(state, 0x8D, 0x29);
++ WriteReg(state, 0x4E, 0xD8);
++ WriteReg(state, 0x88, 0x80);
++ WriteReg(state, 0x52, 0x79);
++ WriteReg(state, 0x53, 0x03);
++ WriteReg(state, 0x59, 0x30);
++ WriteReg(state, 0x5E, 0x02);
++ WriteReg(state, 0x5F, 0x0F);
++ WriteReg(state, 0x71, 0x03);
++ WriteReg(state, 0x72, 0x12);
++ WriteReg(state, 0x73, 0x12);
++
++ return 0;
++}
++
++static int M88DC2000AutoTSClock_P(struct m88dc2800_state *state, u32 sym,
++ u16 qam)
++{
++ u32 dataRate;
++ u8 clk_div, value;
++ printk(KERN_INFO
++ "m88dc2800: M88DC2000AutoTSClock_P, symrate=%d qam=%d\n",
++ sym, qam);
++ switch (qam) {
++ case 16:
++ dataRate = 4;
++ break;
++ case 32:
++ dataRate = 5;
++ break;
++ case 128:
++ dataRate = 7;
++ break;
++ case 256:
++ dataRate = 8;
++ break;
++ case 64:
++ default:
++ dataRate = 6;
++ break;
++ }
++ dataRate *= sym * 105;
++ dataRate /= 800;
++ if (dataRate <= 4115)
++ clk_div = 0x05;
++ else if (dataRate <= 4800)
++ clk_div = 0x04;
++ else if (dataRate <= 5760)
++ clk_div = 0x03;
++ else if (dataRate <= 7200)
++ clk_div = 0x02;
++ else if (dataRate <= 9600)
++ clk_div = 0x01;
++ else
++ clk_div = 0x00;
++ value = ReadReg(state, 0xC2);
++ value &= 0xc0;
++ value |= clk_div;
++ WriteReg(state, 0xC2, value);
++ return 0;
++}
++
++static int M88DC2000AutoTSClock_C(struct m88dc2800_state *state, u32 sym,
++ u16 qam)
++{
++ u32 dataRate;
++ u8 clk_div, value;
++ printk(KERN_INFO
++ "m88dc2800: M88DC2000AutoTSClock_C, symrate=%d qam=%d\n",
++ sym, qam);
++ switch (qam) {
++ case 16:
++ dataRate = 4;
++ break;
++ case 32:
++ dataRate = 5;
++ break;
++ case 128:
++ dataRate = 7;
++ break;
++ case 256:
++ dataRate = 8;
++ break;
++ case 64:
++ default:
++ dataRate = 6;
++ break;
++ }
++ dataRate *= sym * 105;
++ dataRate /= 800;
++ if (dataRate <= 4115)
++ clk_div = 0x3F;
++ else if (dataRate <= 4800)
++ clk_div = 0x36;
++ else if (dataRate <= 5760)
++ clk_div = 0x2D;
++ else if (dataRate <= 7200)
++ clk_div = 0x24;
++ else if (dataRate <= 9600)
++ clk_div = 0x1B;
++ else
++ clk_div = 0x12;
++ value = ReadReg(state, 0xC2);
++ value &= 0xc0;
++ value |= clk_div;
++ WriteReg(state, 0xC2, value);
++ return 0;
++}
++
++static int M88DC2000SetTxMode(struct m88dc2800_state *state, u8 inverted,
++ u8 j83)
++{
++ u8 value = 0;
++ if (inverted)
++ value |= 0x08; /* spectrum inverted */
++ if (j83)
++ value |= 0x01; /* J83C */
++ WriteReg(state, 0x83, value);
++ return 0;
++}
++
++static int M88DC2000SoftReset(struct m88dc2800_state *state)
++{
++ WriteReg(state, 0x80, 0x01);
++ WriteReg(state, 0x82, 0x00);
++ msleep(1);
++ WriteReg(state, 0x80, 0x00);
++ return 0;
++}
++
++static int M88DC2000SetSym(struct m88dc2800_state *state, u32 sym, u32 xtal)
++{
++ u8 value;
++ u8 reg6FH, reg12H;
++ u64 fValue;
++ u32 dwValue;
++
++ printk(KERN_INFO "%s, sym=%d, xtal=%d\n", __func__, sym, xtal);
++ fValue = 4294967296 * (sym + 10);
++ do_div(fValue, xtal);
++
++ /* fValue = 4294967296 * (sym + 10) / xtal; */
++ dwValue = (u32) fValue;
++ printk(KERN_INFO "%s, fvalue1=%x\n", __func__, dwValue);
++ WriteReg(state, 0x58, (u8) ((dwValue >> 24) & 0xff));
++ WriteReg(state, 0x57, (u8) ((dwValue >> 16) & 0xff));
++ WriteReg(state, 0x56, (u8) ((dwValue >> 8) & 0xff));
++ WriteReg(state, 0x55, (u8) ((dwValue >> 0) & 0xff));
++
++ /* fValue = 2048 * xtal / sym; */
++ fValue = 2048 * xtal;
++ do_div(fValue, sym);
++ dwValue = (u32) fValue;
++ printk(KERN_INFO "%s, fvalue2=%x\n", __func__, dwValue);
++ WriteReg(state, 0x5D, (u8) ((dwValue >> 8) & 0xff));
++ WriteReg(state, 0x5C, (u8) ((dwValue >> 0) & 0xff));
++ value = ReadReg(state, 0x5A);
++ if (((dwValue >> 16) & 0x0001) == 0)
++ value &= 0x7F;
++ else
++ value |= 0x80;
++ WriteReg(state, 0x5A, value);
++ value = ReadReg(state, 0x89);
++ if (sym <= 1800)
++ value |= 0x01;
++ else
++ value &= 0xFE;
++ WriteReg(state, 0x89, value);
++ if (sym >= 6700) {
++ reg6FH = 0x0D;
++ reg12H = 0x30;
++ } else if (sym >= 4000) {
++ fValue = 22 * 4096 / sym;
++ reg6FH = (u8) fValue;
++ reg12H = 0x30;
++ } else if (sym >= 2000) {
++ fValue = 14 * 4096 / sym;
++ reg6FH = (u8) fValue;
++ reg12H = 0x20;
++ } else {
++ fValue = 7 * 4096 / sym;
++ reg6FH = (u8) fValue;
++ reg12H = 0x10;
++ }
++ WriteReg(state, 0x6F, reg6FH);
++ WriteReg(state, 0x12, reg12H);
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ if (sym < 3000) {
++ WriteReg(state, 0x6C, 0x16);
++ WriteReg(state, 0x6D, 0x10);
++ WriteReg(state, 0x6E, 0x18);
++ } else {
++ WriteReg(state, 0x6C, 0x14);
++ WriteReg(state, 0x6D, 0x0E);
++ WriteReg(state, 0x6E, 0x36);
++ }
++ } else {
++ WriteReg(state, 0x6C, 0x16);
++ WriteReg(state, 0x6D, 0x10);
++ WriteReg(state, 0x6E, 0x18);
++ }
++ return 0;
++}
++
++static int M88DC2000SetQAM(struct m88dc2800_state *state, u16 qam)
++{
++ u8 reg00H, reg4AH, regC2H, reg44H, reg4CH, reg4DH, reg74H, value;
++ u8 reg8BH, reg8EH;
++ printk(KERN_INFO "%s, qam=%d\n", __func__, qam);
++ regC2H = ReadReg(state, 0xC2);
++ regC2H &= 0xF8;
++ switch (qam) {
++ case 16: /* 16 QAM */
++ reg00H = 0x08;
++ reg4AH = 0x0F;
++ regC2H |= 0x02;
++ reg44H = 0xAA;
++ reg4CH = 0x0C;
++ reg4DH = 0xF7;
++ reg74H = 0x0E;
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ reg8BH = 0x5A;
++ reg8EH = 0xBD;
++ } else {
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ }
++ WriteReg(state, 0x6E, 0x18);
++ break;
++ case 32: /* 32 QAM */
++ reg00H = 0x18;
++ reg4AH = 0xFB;
++ regC2H |= 0x02;
++ reg44H = 0xAA;
++ reg4CH = 0x0C;
++ reg4DH = 0xF7;
++ reg74H = 0x0E;
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ reg8BH = 0x5A;
++ reg8EH = 0xBD;
++ } else {
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ }
++ WriteReg(state, 0x6E, 0x18);
++ break;
++ case 64: /* 64 QAM */
++ reg00H = 0x48;
++ reg4AH = 0xCD;
++ regC2H |= 0x02;
++ reg44H = 0xAA;
++ reg4CH = 0x0C;
++ reg4DH = 0xF7;
++ reg74H = 0x0E;
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ reg8BH = 0x5A;
++ reg8EH = 0xBD;
++ } else {
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ }
++ break;
++ case 128: /* 128 QAM */
++ reg00H = 0x28;
++ reg4AH = 0xFF;
++ regC2H |= 0x02;
++ reg44H = 0xA9;
++ reg4CH = 0x08;
++ reg4DH = 0xF5;
++ reg74H = 0x0E;
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ break;
++ case 256: /* 256 QAM */
++ reg00H = 0x38;
++ reg4AH = 0xCD;
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ regC2H |= 0x02;
++ } else {
++ regC2H |= 0x01;
++ }
++ reg44H = 0xA9;
++ reg4CH = 0x08;
++ reg4DH = 0xF5;
++ reg74H = 0x0E;
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ break;
++ default: /* 64 QAM */
++ reg00H = 0x48;
++ reg4AH = 0xCD;
++ regC2H |= 0x02;
++ reg44H = 0xAA;
++ reg4CH = 0x0C;
++ reg4DH = 0xF7;
++ reg74H = 0x0E;
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80)) {
++ reg8BH = 0x5A;
++ reg8EH = 0xBD;
++ } else {
++ reg8BH = 0x5B;
++ reg8EH = 0x9D;
++ }
++ break;
++ }
++ WriteReg(state, 0x00, reg00H);
++ value = ReadReg(state, 0x88);
++ value |= 0x08;
++ WriteReg(state, 0x88, value);
++ WriteReg(state, 0x4B, 0xFF);
++ WriteReg(state, 0x4A, reg4AH);
++ value &= 0xF7;
++ WriteReg(state, 0x88, value);
++ WriteReg(state, 0xC2, regC2H);
++ WriteReg(state, 0x44, reg44H);
++ WriteReg(state, 0x4C, reg4CH);
++ WriteReg(state, 0x4D, reg4DH);
++ WriteReg(state, 0x74, reg74H);
++ WriteReg(state, 0x8B, reg8BH);
++ WriteReg(state, 0x8E, reg8EH);
++ return 0;
++}
++
++static int M88DC2000WriteTuner_TC2800(struct m88dc2800_state *state,
++ u32 freq_KHz)
++{
++ printk(KERN_INFO "%s, freq=%d KHz\n", __func__, freq_KHz);
++ return mt_fe_tn_set_freq_tc2800(state, freq_KHz);
++}
++
++static int m88dc2800_init(struct dvb_frontend *fe)
++{
++ dprintk("%s()\n", __func__);
++ return 0;
++}
++
++static int m88dc2800_set_parameters(struct dvb_frontend *fe)
++{
++ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
++ u8 is_annex_c, is_update;
++ u16 temp_qam;
++ s32 waiting_time;
++ struct m88dc2800_state *state = fe->demodulator_priv;
++
++ is_annex_c = c->delivery_system == SYS_DVBC_ANNEX_C ? 1 : 0;
++
++ switch (c->modulation) {
++ case QAM_16:
++ temp_qam = 16;
++ break;
++ case QAM_32:
++ temp_qam = 32;
++ break;
++ case QAM_128:
++ temp_qam = 128;
++ break;
++ case QAM_256:
++ temp_qam = 256;
++ break;
++ default: /* QAM_64 */
++ temp_qam = 64;
++ break;
++ }
++
++ state->inverted = c->inversion == INVERSION_ON ? 1 : 0;
++
++ printk(KERN_INFO
++ "m88dc2800: state, freq=%d qam=%d sym=%d inverted=%d xtal=%d\n",
++ state->freq, state->qam, state->sym, state->inverted,
++ state->xtal);
++ printk(KERN_INFO
++ "m88dc2800: set frequency to %d qam=%d symrate=%d annex-c=%d\n",
++ c->frequency, temp_qam, c->symbol_rate, is_annex_c);
++
++ is_update = 0;
++ WriteReg(state, 0x80, 0x01);
++ if (c->frequency != state->freq) {
++ M88DC2000WriteTuner_TC2800(state, c->frequency / 1000);
++ state->freq = c->frequency;
++ }
++ if (c->symbol_rate != state->sym) {
++ M88DC2000SetSym(state, c->symbol_rate / 1000, state->xtal);
++ state->sym = c->symbol_rate;
++ is_update = 1;
++ }
++ if (temp_qam != state->qam) {
++ M88DC2000SetQAM(state, temp_qam);
++ state->qam = temp_qam;
++ is_update = 1;
++ }
++
++ if (is_update != 0) {
++ if (state->config->ts_mode == 3)
++ M88DC2000AutoTSClock_C(state, state->sym / 1000,
++ temp_qam);
++ else
++ M88DC2000AutoTSClock_P(state, state->sym / 1000,
++ temp_qam);
++ }
++
++ M88DC2000SetTxMode(state, state->inverted, is_annex_c);
++ M88DC2000SoftReset(state);
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80)
++ && ((ReadReg(state, 0xE4) & 0x80) == 0x80))
++ waiting_time = 800;
++ else
++ waiting_time = 500;
++ while (waiting_time > 0) {
++ msleep(50);
++ waiting_time -= 50;
++ if (M88DC2000GetLock(state))
++ return 0;
++ }
++
++ state->inverted = (state->inverted != 0) ? 0 : 1;
++ M88DC2000SetTxMode(state, state->inverted, is_annex_c);
++ M88DC2000SoftReset(state);
++ if (((ReadReg(state, 0xE3) & 0x80) == 0x80) &&
++ ((ReadReg(state, 0xE4) & 0x80) == 0x80))
++ waiting_time = 800;
++ else
++ waiting_time = 500;
++ while (waiting_time > 0) {
++ msleep(50);
++ waiting_time -= 50;
++ if (M88DC2000GetLock(state))
++ return 0;
++ }
++ return 0;
++}
++
++static int m88dc2800_read_status(struct dvb_frontend *fe,
++ fe_status_t * status)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ *status = 0;
++
++ if (M88DC2000GetLock(state)) {
++ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER
++ |FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_LOCK;
++ }
++ return 0;
++}
++
++static int m88dc2800_read_ber(struct dvb_frontend *fe, u32 * ber)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ u16 tmp;
++
++ if (M88DC2000GetLock(state) == 0) {
++ state->ber = 0;
++ } else if ((ReadReg(state, 0xA0) & 0x80) != 0x80) {
++ tmp = ReadReg(state, 0xA2) << 8;
++ tmp += ReadReg(state, 0xA1);
++ state->ber = tmp;
++ WriteReg(state, 0xA0, 0x05);
++ WriteReg(state, 0xA0, 0x85);
++ }
++ *ber = state->ber;
++ return 0;
++}
++
++static int m88dc2800_read_signal_strength(struct dvb_frontend *fe,
++ u16 * strength)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ s16 tuner_strength;
++
++ tuner_strength = mt_fe_tn_get_signal_strength_tc2800(state);
++ *strength = tuner_strength < -107 ? 0 : tuner_strength + 107;
++
++ return 0;
++}
++
++static int m88dc2800_read_snr(struct dvb_frontend *fe, u16 * snr)
++{
++ static const u32 mes_log[] = {
++ 0, 3010, 4771, 6021, 6990, 7781, 8451, 9031, 9542, 10000,
++ 10414, 10792, 11139, 11461, 11761, 12041, 12304, 12553, 12788,
++ 13010, 13222, 13424, 13617, 13802, 13979, 14150, 14314, 14472,
++ 14624, 14771, 14914, 15052, 15185, 15315, 15441, 15563, 15682,
++ 15798, 15911, 16021, 16128, 16232, 16335, 16435, 16532, 16628,
++ 16721, 16812, 16902, 16990, 17076, 17160, 17243, 17324, 17404,
++ 17482, 17559, 17634, 17709, 17782, 17853, 17924, 17993, 18062,
++ 18129, 18195, 18261, 18325, 18388, 18451, 18513, 18573, 18633,
++ 18692, 18751, 18808, 18865, 18921, 18976, 19031
++ };
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ u8 i;
++ u32 _snr, mse;
++
++ if ((ReadReg(state, 0x91) & 0x23) != 0x03) {
++ *snr = 0;
++ return 0;
++ }
++ mse = 0;
++ for (i = 0; i < 30; i++) {
++ mse += (ReadReg(state, 0x08) << 8) + ReadReg(state, 0x07);
++ }
++ mse /= 30;
++ if (mse > 80)
++ mse = 80;
++ switch (state->qam) {
++ case 16:
++ _snr = 34080;
++ break; /* 16QAM */
++ case 32:
++ _snr = 37600;
++ break; /* 32QAM */
++ case 64:
++ _snr = 40310;
++ break; /* 64QAM */
++ case 128:
++ _snr = 43720;
++ break; /* 128QAM */
++ case 256:
++ _snr = 46390;
++ break; /* 256QAM */
++ default:
++ _snr = 40310;
++ break;
++ }
++ _snr -= mes_log[mse - 1]; /* C - 10*log10(MSE) */
++ _snr /= 1000;
++ if (_snr > 0xff)
++ _snr = 0xff;
++ *snr = _snr;
++ return 0;
++}
++
++static int m88dc2800_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ u8 u8Value;
++
++ u8Value = ReadReg(state, 0xdf);
++ u8Value |= 0x02; /* Hold */
++ WriteReg(state, 0xdf, u8Value);
++
++ *ucblocks = ReadReg(state, 0xd5);
++ *ucblocks = (*ucblocks << 8) | ReadReg(state, 0xd4);
++
++ u8Value &= 0xfe; /* Clear */
++ WriteReg(state, 0xdf, u8Value);
++ u8Value &= 0xfc; /* Update */
++ u8Value |= 0x01;
++ WriteReg(state, 0xdf, u8Value);
++
++ return 0;
++}
++
++static int m88dc2800_sleep(struct dvb_frontend *fe)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++
++ mt_fe_tn_sleep_tc2800(state);
++ state->freq = 0;
++
++ return 0;
++}
++
++static void m88dc2800_release(struct dvb_frontend *fe)
++{
++ struct m88dc2800_state *state = fe->demodulator_priv;
++ kfree(state);
++}
++
++static struct dvb_frontend_ops m88dc2800_ops;
++
++struct dvb_frontend *m88dc2800_attach(const struct m88dc2800_config
++ *config, struct i2c_adapter *i2c)
++{
++ struct m88dc2800_state *state = NULL;
++
++ /* allocate memory for the internal state */
++ state = kzalloc(sizeof(struct m88dc2800_state), GFP_KERNEL);
++ if (state == NULL)
++ goto error;
++
++ /* setup the state */
++ state->config = config;
++ state->i2c = i2c;
++ state->xtal = 28800;
++
++ WriteReg(state, 0x80, 0x01);
++ M88DC2000RegInitial_TC2800(state);
++ M88DC2000SetTsType(state, state->config->ts_mode);
++ mt_fe_tn_init_tc2800(state);
++
++ /* create dvb_frontend */
++ memcpy(&state->frontend.ops, &m88dc2800_ops,
++ sizeof(struct dvb_frontend_ops));
++ state->frontend.demodulator_priv = state;
++ return &state->frontend;
++
++ error:
++ kfree(state);
++ return NULL;
++}
++
++EXPORT_SYMBOL(m88dc2800_attach);
++
++static struct dvb_frontend_ops m88dc2800_ops = {
++ .delsys = {SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C},
++ .info = {
++ .name = "Montage M88DC2800 DVB-C",
++ .frequency_stepsize = 62500,
++ .frequency_min = 48000000,
++ .frequency_max = 870000000,
++ .symbol_rate_min = 870000,
++ .symbol_rate_max = 9000000,
++ .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
++ FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO
++ },
++ .release = m88dc2800_release,
++ .init = m88dc2800_init,
++ .sleep = m88dc2800_sleep,
++ .set_frontend = m88dc2800_set_parameters,
++ .read_status = m88dc2800_read_status,
++ .read_ber = m88dc2800_read_ber,
++ .read_signal_strength = m88dc2800_read_signal_strength,
++ .read_snr = m88dc2800_read_snr,
++ .read_ucblocks = m88dc2800_read_ucblocks,
++};
++
++MODULE_DESCRIPTION("Montage DVB-C demodulator driver");
++MODULE_AUTHOR("Max Nibble <nibble.max(a)gmail.com>");
++MODULE_LICENSE("GPL");
++MODULE_VERSION("1.00");
+diff --git a/drivers/media/dvb-frontends/m88dc2800.h b/drivers/media/dvb-frontends/m88dc2800.h
+new file mode 100644
+index 0000000..2184322
+--- /dev/null
++++ b/drivers/media/dvb-frontends/m88dc2800.h
+@@ -0,0 +1,44 @@
++/*
++ M88DC2800/M88TC2800 - DVB-C demodulator and tuner from Montage
++
++ Copyright (C) 2012 Max Nibble <nibble.max(a)gmail.com>
++ Copyright (C) 2011 Montage Technology - www.montage-tech.com
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*/
++
++#ifndef M88DC2800_H
++#define M88DC2800_H
++
++#include <linux/kconfig.h>
++#include <linux/dvb/frontend.h>
++
++struct m88dc2800_config {
++ u8 demod_address;
++ u8 ts_mode;
++};
++
++#if IS_ENABLED(CONFIG_DVB_M88DC2800)
++extern struct dvb_frontend* m88dc2800_attach(const struct m88dc2800_config* config,
++ struct i2c_adapter* i2c);
++#else
++static inline struct dvb_frontend* m88dc2800_attach(const struct m88dc2800_config* config,
++ struct i2c_adapter* i2c)
++{
++ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
++ return NULL;
++}
++#endif /* CONFIG_DVB_M88DC2800 */
++#endif /* M88DC2800_H */
+diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
+index d1dcb1d..285c1ad 100644
+--- a/drivers/media/pci/cx23885/Kconfig
++++ b/drivers/media/pci/cx23885/Kconfig
+@@ -23,6 +23,8 @@ config VIDEO_CX23885
+ select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
++ select DVB_DVBSKY_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
++ select DVB_M88DC2800 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24117 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c
+index 16fa7ea..2b63f78 100644
+--- a/drivers/media/pci/cx23885/cimax2.c
++++ b/drivers/media/pci/cx23885/cimax2.c
+@@ -426,7 +426,7 @@ int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+ return state->status;
+ }
+
+-int netup_ci_init(struct cx23885_tsport *port)
++int netup_ci_init(struct cx23885_tsport *port, bool isDVBSky)
+ {
+ struct netup_ci_state *state;
+ u8 cimax_init[34] = {
+@@ -475,6 +475,11 @@ int netup_ci_init(struct cx23885_tsport *port)
+ goto err;
+ }
+
++ if(isDVBSky) {
++ cimax_init[32] = 0x22;
++ cimax_init[33] = 0x00;
++ }
++
+ port->port_priv = state;
+
+ switch (port->nr) {
+@@ -548,3 +553,19 @@ void netup_ci_exit(struct cx23885_tsport *port)
+ dvb_ca_en50221_release(&state->ca);
+ kfree(state);
+ }
++
++/* CI irq handler for DVBSky board*/
++int dvbsky_ci_slot_status(struct cx23885_dev *dev)
++{
++ struct cx23885_tsport *port = NULL;
++ struct netup_ci_state *state = NULL;
++
++ ci_dbg_print("%s:\n", __func__);
++
++ port = &dev->ts1;
++ state = port->port_priv;
++ schedule_work(&state->work);
++ ci_dbg_print("%s: Wakeup CI0\n", __func__);
++
++ return 1;
++}
+diff --git a/drivers/media/pci/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h
+index 518744a..39f3db7 100644
+--- a/drivers/media/pci/cx23885/cimax2.h
++++ b/drivers/media/pci/cx23885/cimax2.h
+@@ -41,7 +41,9 @@ extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot);
+ extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status);
+ extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+ int slot, int open);
+-extern int netup_ci_init(struct cx23885_tsport *port);
++extern int netup_ci_init(struct cx23885_tsport *port, bool isDVBSky);
+ extern void netup_ci_exit(struct cx23885_tsport *port);
+
++extern int dvbsky_ci_slot_status(struct cx23885_dev *dev);
++
+ #endif
+diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
+old mode 100644
+new mode 100755
+index 79f20c8..889bd4c
+--- a/drivers/media/pci/cx23885/cx23885-cards.c
++++ b/drivers/media/pci/cx23885/cx23885-cards.c
+@@ -613,6 +613,49 @@ struct cx23885_board cx23885_boards[] = {
+ .name = "TeVii S471",
+ .portb = CX23885_MPEG_DVB,
+ },
++ [CX23885_BOARD_BST_PS8512] = {
++ .name = "Bestunar PS8512",
++ .portb = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_S950] = {
++ .name = "DVBSKY S950",
++ .portb = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_S952] = {
++ .name = "DVBSKY S952",
++ .portb = CX23885_MPEG_DVB,
++ .portc = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_S950_CI] = {
++ .ci_type = 3,
++ .name = "DVBSKY S950CI DVB-S2 CI",
++ .portb = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_C2800E_CI] = {
++ .ci_type = 3,
++ .name = "DVBSKY C2800E DVB-C CI",
++ .portb = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_T9580] = {
++ .name = "DVBSKY T9580",
++ .portb = CX23885_MPEG_DVB,
++ .portc = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_T980_CI] = {
++ .ci_type = 3,
++ .name = "DVBSKY T980CI DVB-T2/C CI",
++ .portb = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_DVBSKY_T982] = {
++ .name = "DVBSKY T982",
++ .portb = CX23885_MPEG_DVB,
++ .portc = CX23885_MPEG_DVB,
++ },
++ [CX23885_BOARD_TT_4500_CI] = {
++ .ci_type = 3,
++ .name = "TT-budget CT2-4500 CI",
++ .portb = CX23885_MPEG_DVB,
++ },
+ [CX23885_BOARD_PROF_8000] = {
+ .name = "Prof Revolution DVB-S2 8000",
+ .portb = CX23885_MPEG_DVB,
+@@ -874,6 +917,42 @@ struct cx23885_subid cx23885_subids[] = {
+ .subdevice = 0x9022,
+ .card = CX23885_BOARD_TEVII_S471,
+ }, {
++ .subvendor = 0x14f1,
++ .subdevice = 0x8512,
++ .card = CX23885_BOARD_BST_PS8512,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x0950,
++ .card = CX23885_BOARD_DVBSKY_S950,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x0952,
++ .card = CX23885_BOARD_DVBSKY_S952,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x950C,
++ .card = CX23885_BOARD_DVBSKY_S950_CI,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x2800,
++ .card = CX23885_BOARD_DVBSKY_C2800E_CI,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x9580,
++ .card = CX23885_BOARD_DVBSKY_T9580,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x980C,
++ .card = CX23885_BOARD_DVBSKY_T980_CI,
++ }, {
++ .subvendor = 0x4254,
++ .subdevice = 0x0982,
++ .card = CX23885_BOARD_DVBSKY_T982,
++ }, {
++ .subvendor = 0x13C2,
++ .subdevice = 0x3013,
++ .card = CX23885_BOARD_TT_4500_CI,
++ }, {
+ .subvendor = 0x8000,
+ .subdevice = 0x3034,
+ .card = CX23885_BOARD_PROF_8000,
+@@ -1483,9 +1562,75 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
+ cx_set(GP0_IO, 0x00040004);
+ mdelay(60);
+ break;
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_BST_PS8512:
++ cx23885_gpio_enable(dev, GPIO_2, 1);
++ cx23885_gpio_clear(dev, GPIO_2);
++ msleep(100);
++ cx23885_gpio_set(dev, GPIO_2);
++ break;
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T982:
++ cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
++
++ cx23885_gpio_enable(dev, GPIO_2, 1);
++ cx23885_gpio_enable(dev, GPIO_11, 1);
++
++ cx23885_gpio_clear(dev, GPIO_2);
++ cx23885_gpio_clear(dev, GPIO_11);
++ msleep(100);
++ cx23885_gpio_set(dev, GPIO_2);
++ cx23885_gpio_set(dev, GPIO_11);
++ break;
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_TT_4500_CI:
++ cx_set(GP0_IO, 0x00060002); /* GPIO 1/2 as output */
++ cx_clear(GP0_IO, 0x00010004); /*GPIO 0 as input*/
++ mdelay(100);/* reset delay */
++ cx_set(GP0_IO, 0x00060004); /* GPIO as out, reset high */
++ cx_clear(GP0_IO, 0x00010002);
++ cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
++ /* GPIO-15 IN as ~ACK, rest as OUT */
++ cx_write(MC417_OEN, 0x00001000);
++ /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
++ cx_write(MC417_RWD, 0x0000c300);
++ /* enable irq */
++ cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
++ break;
+ }
+ }
+
++static int cx23885_ir_patch(struct i2c_adapter *i2c, u8 reg, u8 mask)
++{
++ struct i2c_msg msgs[2];
++ u8 tx_buf[2], rx_buf[1];
++ /* Write register address */
++ tx_buf[0] = reg;
++ msgs[0].addr = 0x4c;
++ msgs[0].flags = 0;
++ msgs[0].len = 1;
++ msgs[0].buf = (char *) tx_buf;
++ /* Read data from register */
++ msgs[1].addr = 0x4c;
++ msgs[1].flags = I2C_M_RD;
++ msgs[1].len = 1;
++ msgs[1].buf = (char *) rx_buf;
++
++ i2c_transfer(i2c, msgs, 2);
++
++ tx_buf[0] = reg;
++ tx_buf[1] = rx_buf[0] | mask;
++ msgs[0].addr = 0x4c;
++ msgs[0].flags = 0;
++ msgs[0].len = 2;
++ msgs[0].buf = (char *) tx_buf;
++
++ return i2c_transfer(i2c, msgs, 1);
++}
++
+ int cx23885_ir_init(struct cx23885_dev *dev)
+ {
+ static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
+@@ -1573,6 +1718,26 @@ int cx23885_ir_init(struct cx23885_dev *dev)
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+ break;
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
++ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
++ if (dev->sd_ir == NULL) {
++ ret = -ENODEV;
++ break;
++ }
++ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
++ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
++
++ cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x1f,0x80);
++ cx23885_ir_patch(&(dev->i2c_bus[2].i2c_adap),0x23,0x80);
++ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (!enable_885_ir)
+ break;
+@@ -1608,13 +1773,22 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
+ case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
+ cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
+ /* sd_ir is a duplicate pointer to the AV Core, just clear it */
+ dev->sd_ir = NULL;
+ break;
+ }
+ }
+-
++#if 0
+ static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
+ {
+ int data;
+@@ -1639,7 +1813,7 @@ static int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
+
+ return tdo;
+ }
+-
++#endif
+ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
+ {
+ switch (dev->board) {
+@@ -1655,6 +1829,15 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
+ case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
+ if (dev->sd_ir)
+ cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
+ break;
+@@ -1752,6 +1935,12 @@ void cx23885_card_setup(struct cx23885_dev *dev)
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_TT_4500_CI:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_TEVII_S471:
+ case CX23885_BOARD_DVBWORLD_2005:
+@@ -1795,6 +1984,23 @@ void cx23885_card_setup(struct cx23885_dev *dev)
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
++ case CX23885_BOARD_DVBSKY_S952:
++ ts1->gen_ctrl_val = 0x5; /* Parallel */
++ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
++ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
++ ts2->gen_ctrl_val = 0xe; /* Serial bus + punctured clock */
++ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
++ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
++ break;
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T982:
++ ts1->gen_ctrl_val = 0x5; /* Parallel */
++ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
++ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
++ ts2->gen_ctrl_val = 0x8; /* Serial bus */
++ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
++ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
++ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR4400:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+@@ -1860,6 +2066,15 @@ void cx23885_card_setup(struct cx23885_dev *dev)
+ case CX23885_BOARD_AVERMEDIA_HC81R:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
+ dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_bus[2].i2c_adap,
+ "cx25840", 0x88 >> 1, NULL);
+@@ -1879,13 +2094,13 @@ void cx23885_card_setup(struct cx23885_dev *dev)
+ int ret;
+ const struct firmware *fw;
+ const char *filename = "dvb-netup-altera-01.fw";
+- char *action = "configure";
++// char *action = "configure";
+ static struct netup_card_info cinfo;
+- struct altera_config netup_config = {
+- .dev = dev,
+- .action = action,
+- .jtag_io = netup_jtag_io,
+- };
++// struct altera_config netup_config = {
++// .dev = dev,
++// .action = action,
++// .jtag_io = netup_jtag_io,
++// };
+
+ netup_initialize(dev);
+
+@@ -1909,8 +2124,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
+ printk(KERN_ERR "did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details "
+ "on firmware-problems.", filename);
+- else
+- altera_init(&netup_config, fw);
++ //else
++ // altera_init(&netup_config, fw);
+
+ release_firmware(fw);
+ break;
+diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
+index edcd79d..c9afeab 100644
+--- a/drivers/media/pci/cx23885/cx23885-core.c
++++ b/drivers/media/pci/cx23885/cx23885-core.c
+@@ -450,9 +450,9 @@ void cx23885_wakeup(struct cx23885_tsport *port,
+ del_timer(&q->timeout);
+ else
+ mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+- if (bc != 1)
++/* if (bc != 1)
+ printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n",
+- __func__, bc);
++ __func__, bc);*/
+ }
+
+ int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+@@ -1909,6 +1909,10 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id)
+ (pci_status & PCI_MSK_GPIO0))
+ handled += altera_ci_irq(dev);
+
++ if (cx23885_boards[dev->board].ci_type == 3 &&
++ (pci_status & PCI_MSK_GPIO0))
++ handled += dvbsky_ci_slot_status(dev);
++
+ if (ts1_status) {
+ if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+ handled += cx23885_irq_ts(ts1, ts1_status);
+@@ -2141,6 +2145,10 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
+ cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0);
+ break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_TT_4500_CI:
+ cx23885_irq_add_enable(dev, PCI_MSK_GPIO0);
+ break;
+ }
+diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
+index 0549205..7816112 100644
+--- a/drivers/media/pci/cx23885/cx23885-dvb.c
++++ b/drivers/media/pci/cx23885/cx23885-dvb.c
+@@ -51,6 +51,8 @@
+ #include "stv6110.h"
+ #include "lnbh24.h"
+ #include "cx24116.h"
++#include "dvbsky_m88ds3103.h"
++#include "m88dc2800.h"
+ #include "cx24117.h"
+ #include "cimax2.h"
+ #include "lgs8gxx.h"
+@@ -473,6 +475,7 @@ static struct ds3000_config tevii_ds3000_config = {
+ static struct ts2020_config tevii_ts2020_config = {
+ .tuner_address = 0x60,
+ .clk_out_div = 1,
++ .frequency_div = 1146000,
+ };
+
+ static struct cx24116_config dvbworld_cx24116_config = {
+@@ -507,6 +510,93 @@ static struct xc5000_config mygica_x8507_xc5000_config = {
+ .if_khz = 4000,
+ };
+
++/* bst control */
++int bst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
++{
++ struct cx23885_tsport *port = fe->dvb->priv;
++ struct cx23885_dev *dev = port->dev;
++
++ cx23885_gpio_enable(dev, GPIO_1, 1);
++ cx23885_gpio_enable(dev, GPIO_0, 1);
++
++ switch (voltage) {
++ case SEC_VOLTAGE_13:
++ cx23885_gpio_set(dev, GPIO_1);
++ cx23885_gpio_clear(dev, GPIO_0);
++ break;
++ case SEC_VOLTAGE_18:
++ cx23885_gpio_set(dev, GPIO_1);
++ cx23885_gpio_set(dev, GPIO_0);
++ break;
++ case SEC_VOLTAGE_OFF:
++ cx23885_gpio_clear(dev, GPIO_1);
++ cx23885_gpio_clear(dev, GPIO_0);
++ break;
++ }
++ return 0;
++}
++
++int dvbsky_set_voltage_sec(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
++{
++ struct cx23885_tsport *port = fe->dvb->priv;
++ struct cx23885_dev *dev = port->dev;
++
++ cx23885_gpio_enable(dev, GPIO_12, 1);
++ cx23885_gpio_enable(dev, GPIO_13, 1);
++
++ switch (voltage) {
++ case SEC_VOLTAGE_13:
++ cx23885_gpio_set(dev, GPIO_13);
++ cx23885_gpio_clear(dev, GPIO_12);
++ break;
++ case SEC_VOLTAGE_18:
++ cx23885_gpio_set(dev, GPIO_13);
++ cx23885_gpio_set(dev, GPIO_12);
++ break;
++ case SEC_VOLTAGE_OFF:
++ cx23885_gpio_clear(dev, GPIO_13);
++ cx23885_gpio_clear(dev, GPIO_12);
++ break;
++ }
++ return 0;
++}
++
++/* bestunar single dvb-s2 */
++static struct dvbsky_m88ds3103_config bst_ds3103_config = {
++ .demod_address = 0x68,
++ .ci_mode = 0,
++ .pin_ctrl = 0x82,
++ .ts_mode = 0,
++ .set_voltage = bst_set_voltage,
++};
++/* DVBSKY dual dvb-s2 */
++static struct dvbsky_m88ds3103_config dvbsky_ds3103_config_pri = {
++ .demod_address = 0x68,
++ .ci_mode = 0,
++ .pin_ctrl = 0x82,
++ .ts_mode = 0,
++ .set_voltage = bst_set_voltage,
++};
++static struct dvbsky_m88ds3103_config dvbsky_ds3103_config_sec = {
++ .demod_address = 0x68,
++ .ci_mode = 0,
++ .pin_ctrl = 0x82,
++ .ts_mode = 1,
++ .set_voltage = dvbsky_set_voltage_sec,
++};
++
++static struct dvbsky_m88ds3103_config dvbsky_ds3103_ci_config = {
++ .demod_address = 0x68,
++ .ci_mode = 2,
++ .pin_ctrl = 0x82,
++ .ts_mode = 0,
++};
++
++static struct m88dc2800_config dvbsky_dc2800_config = {
++ .demod_address = 0x1c,
++ .ts_mode = 3,
++};
++
+ static struct stv090x_config prof_8000_stv090x_config = {
+ .device = STV0903,
+ .demod_mode = STV090x_SINGLE,
+@@ -1311,6 +1401,92 @@ static int dvb_register(struct cx23885_tsport *port)
+ &tevii_ts2020_config, &i2c_bus->i2c_adap);
+ }
+ break;
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ i2c_bus = &dev->i2c_bus[1];
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &bst_ds3103_config,
++ &i2c_bus->i2c_adap);
++ break;
++
++ case CX23885_BOARD_DVBSKY_S952:
++ switch (port->nr) {
++ /* port B */
++ case 1:
++ i2c_bus = &dev->i2c_bus[1];
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_ds3103_config_pri,
++ &i2c_bus->i2c_adap);
++ break;
++ /* port C */
++ case 2:
++ i2c_bus = &dev->i2c_bus[0];
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_ds3103_config_sec,
++ &i2c_bus->i2c_adap);
++ break;
++ }
++ break;
++
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ i2c_bus = &dev->i2c_bus[1];
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_ds3103_ci_config,
++ &i2c_bus->i2c_adap);
++ break;
++
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ i2c_bus = &dev->i2c_bus[1];
++ fe0->dvb.frontend = dvb_attach(m88dc2800_attach,
++ &dvbsky_dc2800_config,
++ &i2c_bus->i2c_adap);
++ break;
++
++ case CX23885_BOARD_DVBSKY_T9580:
++ switch (port->nr) {
++ /* port B */
++ case 1:
++ i2c_bus = &dev->i2c_bus[1];
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_ds3103_config_pri,
++ &i2c_bus->i2c_adap);
++ break;
++ /* port C */
++// case 2:
++// i2c_bus = &dev->i2c_bus[0];
++// fe0->dvb.frontend = dvb_attach(sit2_attach,
++// &dvbsky_sit2_config_pci_s,
++// &i2c_bus->i2c_adap);
++ break;
++ }
++ break;
++
++// case CX23885_BOARD_DVBSKY_T980_CI:
++// case CX23885_BOARD_TT_4500_CI:
++// i2c_bus = &dev->i2c_bus[1];
++// fe0->dvb.frontend = dvb_attach(sit2_attach,
++// &dvbsky_sit2_config_pci_p,
++// &i2c_bus->i2c_adap);
++// break;
++
++// case CX23885_BOARD_DVBSKY_T982:
++// switch (port->nr) {
++// /* port B */
++// case 1:
++// i2c_bus = &dev->i2c_bus[1];
++// fe0->dvb.frontend = dvb_attach(sit2_attach,
++// &dvbsky_sit2_config_pci_p,
++// &i2c_bus->i2c_adap);
++// break;
++// /* port C */
++// case 2:
++// i2c_bus = &dev->i2c_bus[0];
++// fe0->dvb.frontend = dvb_attach(sit2_attach,
++// &dvbsky_sit2_config_pci_s,
++// &i2c_bus->i2c_adap);
++// break;
++// }
++// break;
+ case CX23885_BOARD_PROF_8000:
+ i2c_bus = &dev->i2c_bus[0];
+
+@@ -1386,7 +1562,7 @@ static int dvb_register(struct cx23885_tsport *port)
+ printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
+ port->nr, port->frontends.adapter.proposed_mac);
+
+- netup_ci_init(port);
++ netup_ci_init(port, false);
+ break;
+ }
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+@@ -1413,6 +1589,44 @@ static int dvb_register(struct cx23885_tsport *port)
+ memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
+ break;
+ }
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T982:{
++ u8 eeprom[256]; /* 24C02 i2c eeprom */
++
++ if(port->nr > 2)
++ break;
++
++ dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
++ tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
++ printk(KERN_INFO "DVBSKY PCIe MAC= %pM\n", eeprom + 0xc0+(port->nr-1)*8);
++ memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
++ (port->nr-1)*8, 6);
++ break;
++ }
++ case CX23885_BOARD_DVBSKY_S950_CI: {
++ u8 eeprom[256]; /* 24C02 i2c eeprom */
++
++ if(port->nr > 2)
++ break;
++
++ dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
++ tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
++ printk(KERN_INFO "DVBSKY PCIe MAC= %pM\n", eeprom + 0xc0+(port->nr-1)*8);
++ memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
++ (port->nr-1)*8, 6);
++
++ netup_ci_init(port, true);
++ break;
++ }
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_TT_4500_CI: {
++ netup_ci_init(port, true);
++ break;
++ }
+ }
+
+ return ret;
+@@ -1495,6 +1709,10 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
+
+ switch (port->dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_TT_4500_CI:
+ netup_ci_exit(port);
+ break;
+ case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
+index 8a49e7c..1642ae8 100644
+--- a/drivers/media/pci/cx23885/cx23885-input.c
++++ b/drivers/media/pci/cx23885/cx23885-input.c
+@@ -92,6 +92,15 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+ case CX23885_BOARD_MYGICA_X8507:
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
+ /*
+ * The only boards we handle right now. However other boards
+ * using the CX2388x integrated IR controller should be similar
+@@ -144,6 +153,15 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_MYGICA_X8507:
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ case CX23885_BOARD_TT_4500_CI:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+@@ -302,6 +320,26 @@ int cx23885_input_init(struct cx23885_dev *dev)
+ /* A guess at the remote */
+ rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
+ break;
++ case CX23885_BOARD_BST_PS8512:
++ case CX23885_BOARD_DVBSKY_S950:
++ case CX23885_BOARD_DVBSKY_S952:
++ case CX23885_BOARD_DVBSKY_S950_CI:
++ case CX23885_BOARD_DVBSKY_C2800E_CI:
++ case CX23885_BOARD_DVBSKY_T9580:
++ case CX23885_BOARD_DVBSKY_T980_CI:
++ case CX23885_BOARD_DVBSKY_T982:
++ /* Integrated CX2388[58] IR controller */
++ driver_type = RC_DRIVER_IR_RAW;
++ allowed_protos = RC_BIT_ALL;
++ /* A guess at the remote */
++ rc_map = RC_MAP_DVBSKY;
++ break;
++ case CX23885_BOARD_TT_4500_CI:
++ /* Integrated CX2388[58] IR controller */
++ driver_type = RC_DRIVER_IR_RAW;
++ allowed_protos = RC_BIT_ALL;
++ rc_map = RC_MAP_TT_1500;
++ break;
+ case CX23885_BOARD_TBS_6980:
+ case CX23885_BOARD_TBS_6981:
+ /* Integrated CX23885 IR controller */
+diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
+index 0fa4048..7a39d82 100644
+--- a/drivers/media/pci/cx23885/cx23885.h
++++ b/drivers/media/pci/cx23885/cx23885.h
+@@ -97,6 +97,17 @@
+ #define CX23885_BOARD_TBS_6980 41
+ #define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
+
++#define CX23885_BOARD_DVBSKY_PCIE 43
++#define CX23885_BOARD_BST_PS8512 (CX23885_BOARD_DVBSKY_PCIE+0)
++#define CX23885_BOARD_DVBSKY_S952 (CX23885_BOARD_DVBSKY_PCIE+1)
++#define CX23885_BOARD_DVBSKY_S950 (CX23885_BOARD_DVBSKY_PCIE+2)
++#define CX23885_BOARD_DVBSKY_S950_CI (CX23885_BOARD_DVBSKY_PCIE+3)
++#define CX23885_BOARD_DVBSKY_C2800E_CI (CX23885_BOARD_DVBSKY_PCIE+4)
++#define CX23885_BOARD_DVBSKY_T9580 (CX23885_BOARD_DVBSKY_PCIE+5)
++#define CX23885_BOARD_DVBSKY_T980_CI (CX23885_BOARD_DVBSKY_PCIE+6)
++#define CX23885_BOARD_DVBSKY_T982 (CX23885_BOARD_DVBSKY_PCIE+7)
++#define CX23885_BOARD_TT_4500_CI (CX23885_BOARD_DVBSKY_PCIE+8)
++
+ #define GPIO_0 0x00000001
+ #define GPIO_1 0x00000002
+ #define GPIO_2 0x00000004
+@@ -234,7 +245,7 @@ struct cx23885_board {
+ */
+ u32 clk_freq;
+ struct cx23885_input input[MAX_CX23885_INPUT];
+- int ci_type; /* for NetUP */
++ int ci_type; /* 1 and 2 for NetUP, 3 for DVBSky. */
+ /* Force bottom field first during DMA (888 workaround) */
+ u32 force_bff;
+ };
+diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig
+index a63a9ad..7deb300 100644
+--- a/drivers/media/pci/cx88/Kconfig
++++ b/drivers/media/pci/cx88/Kconfig
+@@ -57,6 +57,7 @@ config VIDEO_CX88_DVB
+ select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
++ select DVB_DVBSKY_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
+index e18a7ac..317511d 100644
+--- a/drivers/media/pci/cx88/cx88-cards.c
++++ b/drivers/media/pci/cx88/cx88-cards.c
+@@ -2314,6 +2314,18 @@ static const struct cx88_board cx88_boards[] = {
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
++ [CX88_BOARD_BST_PS8312] = {
++ .name = "Bestunar PS8312 DVB-S/S2",
++ .tuner_type = UNSET,
++ .radio_type = UNSET,
++ .tuner_addr = ADDR_UNSET,
++ .radio_addr = ADDR_UNSET,
++ .input = { {
++ .type = CX88_VMUX_DVB,
++ .vmux = 0,
++ } },
++ .mpeg = CX88_MPEG_DVB,
++ },
+ };
+
+ /* ------------------------------------------------------------------ */
+@@ -2818,6 +2830,10 @@ static const struct cx88_subid cx88_subids[] = {
+ .subvendor = 0x1822,
+ .subdevice = 0x0023,
+ .card = CX88_BOARD_TWINHAN_VP1027_DVBS,
++ }, {
++ .subvendor = 0x14f1,
++ .subdevice = 0x8312,
++ .card = CX88_BOARD_BST_PS8312,
+ },
+ };
+
+@@ -3551,6 +3567,12 @@ static void cx88_card_setup(struct cx88_core *core)
+ cx_write(MO_SRST_IO, 1);
+ msleep(100);
+ break;
++ case CX88_BOARD_BST_PS8312:
++ cx_write(MO_GP1_IO, 0x808000);
++ msleep(100);
++ cx_write(MO_GP1_IO, 0x808080);
++ msleep(100);
++ break;
+ } /*end switch() */
+
+
+diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
+index 053ed1b..955b916 100644
+--- a/drivers/media/pci/cx88/cx88-dvb.c
++++ b/drivers/media/pci/cx88/cx88-dvb.c
+@@ -54,6 +54,7 @@
+ #include "stv0288.h"
+ #include "stb6000.h"
+ #include "cx24116.h"
++#include "dvbsky_m88ds3103.h"
+ #include "stv0900.h"
+ #include "stb6100.h"
+ #include "stb6100_proc.h"
+@@ -459,6 +460,56 @@ static int tevii_dvbs_set_voltage(struct dvb_frontend *fe,
+ return core->prev_set_voltage(fe, voltage);
+ return 0;
+ }
++/*CX88_BOARD_BST_PS8312*/
++static int bst_dvbs_set_voltage(struct dvb_frontend *fe,
++ fe_sec_voltage_t voltage)
++{
++ struct cx8802_dev *dev= fe->dvb->priv;
++ struct cx88_core *core = dev->core;
++
++ cx_write(MO_GP1_IO, 0x111111);
++ switch (voltage) {
++ case SEC_VOLTAGE_13:
++ cx_write(MO_GP1_IO, 0x020200);
++ break;
++ case SEC_VOLTAGE_18:
++ cx_write(MO_GP1_IO, 0x020202);
++ break;
++ case SEC_VOLTAGE_OFF:
++ cx_write(MO_GP1_IO, 0x111100);
++ break;
++ }
++
++ if (core->prev_set_voltage)
++ return core->prev_set_voltage(fe, voltage);
++ return 0;
++}
++
++static int bst_dvbs_set_voltage_v2(struct dvb_frontend *fe,
++ fe_sec_voltage_t voltage)
++{
++ struct cx8802_dev *dev= fe->dvb->priv;
++ struct cx88_core *core = dev->core;
++
++ cx_write(MO_GP1_IO, 0x111101);
++ switch (voltage) {
++ case SEC_VOLTAGE_13:
++ cx_write(MO_GP1_IO, 0x020200);
++ break;
++ case SEC_VOLTAGE_18:
++
++ cx_write(MO_GP1_IO, 0x020202);
++ break;
++ case SEC_VOLTAGE_OFF:
++
++ cx_write(MO_GP1_IO, 0x111110);
++ break;
++ }
++
++ if (core->prev_set_voltage)
++ return core->prev_set_voltage(fe, voltage);
++ return 0;
++}
+
+ static int vp1027_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+@@ -706,6 +757,11 @@ static struct ts2020_config tevii_ts2020_config = {
+ .clk_out_div = 1,
+ };
+
++static struct dvbsky_m88ds3103_config dvbsky_ds3103_config = {
++ .demod_address = 0x68,
++ .set_ts_params = ds3000_set_ts_param,
++};
++
+ static const struct stv0900_config prof_7301_stv0900_config = {
+ .demod_address = 0x6a,
+ /* demod_mode = 0,*/
+@@ -1487,6 +1543,35 @@ static int dvb_register(struct cx8802_dev *dev)
+ tevii_dvbs_set_voltage;
+ }
+ break;
++ case CX88_BOARD_BST_PS8312:
++ fe0->dvb.frontend = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_ds3103_config,
++ &core->i2c_adap);
++ if (fe0->dvb.frontend != NULL){
++ int ret;
++ u8 b0[] = { 0x60 };
++ u8 b1[2] = { 0 };
++ struct i2c_msg msg[] = {
++ {
++ .addr = 0x50,
++ .flags = 0,
++ .buf = b0,
++ .len = 1
++ }, {
++ .addr = 0x50,
++ .flags = I2C_M_RD,
++ .buf = b1,
++ .len = 2
++ }
++ };
++ ret = i2c_transfer(&core->i2c_adap, msg, 2);
++ printk("PS8312: config = %02x, %02x", b1[0],b1[1]);
++ if(b1[0] == 0xaa)
++ fe0->dvb.frontend->ops.set_voltage = bst_dvbs_set_voltage_v2;
++ else
++ fe0->dvb.frontend->ops.set_voltage = bst_dvbs_set_voltage;
++ }
++ break;
+ case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_PROF_7300:
+diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c
+index f29e18c..9581f4e 100644
+--- a/drivers/media/pci/cx88/cx88-input.c
++++ b/drivers/media/pci/cx88/cx88-input.c
+@@ -129,7 +129,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
+ u32 gpio_key = cx_read(MO_GP0_IO);
+
+ data = (data << 4) | ((gpio_key & 0xf0) >> 4);
+-
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,17,0)
+ rc_keydown(ir->dev, data, 0);
+
+ } else if (ir->mask_keydown) {
+@@ -151,6 +151,45 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
+ rc_keydown_notimeout(ir->dev, data, 0);
+ rc_keyup(ir->dev);
+ }
++#else
++ rc_keydown(ir->dev, RC_TYPE_UNKNOWN, data, 0);
++
++ } else if (ir->core->boardnr == CX88_BOARD_PROLINK_PLAYTVPVR ||
++ ir->core->boardnr == CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO) {
++ /* bit cleared on keydown, NEC scancode, 0xAAAACC, A = 0x866b */
++ u16 addr;
++ u8 cmd;
++ u32 scancode;
++
++ addr = (data >> 8) & 0xffff;
++ cmd = (data >> 0) & 0x00ff;
++ scancode = RC_SCANCODE_NECX(addr, cmd);
++
++ if (0 == (gpio & ir->mask_keyup))
++ rc_keydown_notimeout(ir->dev, RC_TYPE_NEC, scancode, 0);
++ else
++ rc_keyup(ir->dev);
++
++ } else if (ir->mask_keydown) {
++ /* bit set on keydown */
++ if (gpio & ir->mask_keydown)
++ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
++ else
++ rc_keyup(ir->dev);
++
++ } else if (ir->mask_keyup) {
++ /* bit cleared on keydown */
++ if (0 == (gpio & ir->mask_keyup))
++ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
++ else
++ rc_keyup(ir->dev);
++
++ } else {
++ /* can't distinguish keydown/up :-/ */
++ rc_keydown_notimeout(ir->dev, RC_TYPE_UNKNOWN, data, 0);
++ rc_keyup(ir->dev);
++ }
++#endif
+ }
+
+ static enum hrtimer_restart cx88_ir_work(struct hrtimer *timer)
+@@ -419,6 +458,10 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
+ rc_type = RC_BIT_NEC;
+ ir->sampling = 0xff00; /* address */
+ break;
++ case CX88_BOARD_BST_PS8312:
++ ir_codes = RC_MAP_DVBSKY;
++ ir->sampling = 0xff00; /* address */
++ break;
+ }
+
+ if (!ir_codes) {
+@@ -471,7 +514,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
+ dev->driver_type = RC_DRIVER_SCANCODE;
+ dev->allowed_protos = rc_type;
+ }
+-
+ ir->core = core;
+ core->ir = ir;
+
+@@ -538,8 +580,12 @@ void cx88_ir_irq(struct cx88_core *core)
+ }
+ ir_raw_event_handle(ir->dev);
+ }
+-
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,17,0)
+ static int get_key_pvr2000(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
++#else
++static int get_key_pvr2000(struct IR_i2c *ir, enum rc_type *protocol,
++ u32 *scancode, u8 *toggle)
++#endif
+ {
+ int flags, code;
+
+@@ -562,9 +608,14 @@ static int get_key_pvr2000(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+
+ dprintk("IR Key/Flags: (0x%02x/0x%02x)\n",
+ code & 0xff, flags & 0xff);
+-
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,17,0)
+ *ir_key = code & 0xff;
+ *ir_raw = code;
++#else
++ *protocol = RC_TYPE_UNKNOWN;
++ *scancode = code & 0xff;
++ *toggle = 0;
++#endif
+ return 1;
+ }
+
+diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h
+index 28893a6..5fa5f48 100644
+--- a/drivers/media/pci/cx88/cx88.h
++++ b/drivers/media/pci/cx88/cx88.h
+@@ -237,6 +237,7 @@ extern const struct sram_channel cx88_sram_channels[];
+ #define CX88_BOARD_WINFAST_DTV1800H_XC4000 88
+ #define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36 89
+ #define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43 90
++#define CX88_BOARD_BST_PS8312 91
+
+ enum cx88_itype {
+ CX88_VMUX_COMPOSITE1 = 1,
+diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
+index 0b8c549..abf6079 100644
+--- a/drivers/media/rc/keymaps/Makefile
++++ b/drivers/media/rc/keymaps/Makefile
+@@ -28,6 +28,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
+ rc-dm1105-nec.o \
+ rc-dntv-live-dvb-t.o \
+ rc-dntv-live-dvbt-pro.o \
++ rc-dvbsky.o \
+ rc-em-terratec.o \
+ rc-encore-enltv2.o \
+ rc-encore-enltv.o \
+diff --git a/drivers/media/rc/keymaps/rc-dvbsky.c b/drivers/media/rc/keymaps/rc-dvbsky.c
+new file mode 100644
+index 0000000..bfc41fb
+--- /dev/null
++++ b/drivers/media/rc/keymaps/rc-dvbsky.c
+@@ -0,0 +1,78 @@
++/* rc-dvbsky.c - Keytable for Dvbsky Remote Controllers
++ *
++ * keymap imported from ir-keymaps.c
++ *
++ *
++ * Copyright (c) 2010-2012 by Nibble Max <nibble.max(a)gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <media/rc-map.h>
++#include <linux/module.h>
++/*
++ * This table contains the complete RC5 code, instead of just the data part
++ */
++
++static struct rc_map_table rc5_dvbsky[] = {
++ { 0x0000, KEY_0 },
++ { 0x0001, KEY_1 },
++ { 0x0002, KEY_2 },
++ { 0x0003, KEY_3 },
++ { 0x0004, KEY_4 },
++ { 0x0005, KEY_5 },
++ { 0x0006, KEY_6 },
++ { 0x0007, KEY_7 },
++ { 0x0008, KEY_8 },
++ { 0x0009, KEY_9 },
++ { 0x000a, KEY_MUTE },
++ { 0x000d, KEY_OK },
++ { 0x000b, KEY_STOP },
++ { 0x000c, KEY_EXIT },
++ { 0x000e, KEY_CAMERA }, /*Snap shot*/
++ { 0x000f, KEY_SUBTITLE }, /*PIP*/
++ { 0x0010, KEY_VOLUMEUP },
++ { 0x0011, KEY_VOLUMEDOWN },
++ { 0x0012, KEY_FAVORITES },
++ { 0x0013, KEY_LIST }, /*Info*/
++ { 0x0016, KEY_PAUSE },
++ { 0x0017, KEY_PLAY },
++ { 0x001f, KEY_RECORD },
++ { 0x0020, KEY_CHANNELDOWN },
++ { 0x0021, KEY_CHANNELUP },
++ { 0x0025, KEY_POWER2 },
++ { 0x0026, KEY_REWIND },
++ { 0x0027, KEY_FASTFORWARD },
++ { 0x0029, KEY_LAST },
++ { 0x002b, KEY_MENU },
++ { 0x002c, KEY_EPG },
++ { 0x002d, KEY_ZOOM },
++};
++
++static struct rc_map_list rc5_dvbsky_map = {
++ .map = {
++ .scan = rc5_dvbsky,
++ .size = ARRAY_SIZE(rc5_dvbsky),
++ .rc_type = RC_TYPE_RC5,
++ .name = RC_MAP_DVBSKY,
++ }
++};
++
++static int __init init_rc_map_rc5_dvbsky(void)
++{
++ return rc_map_register(&rc5_dvbsky_map);
++}
++
++static void __exit exit_rc_map_rc5_dvbsky(void)
++{
++ rc_map_unregister(&rc5_dvbsky_map);
++}
++
++module_init(init_rc_map_rc5_dvbsky)
++module_exit(exit_rc_map_rc5_dvbsky)
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Nibble Max <nibble.max(a)gmail.com>");
+diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
+index 2059d0c..5ff51aa 100644
+--- a/drivers/media/usb/dvb-usb-v2/Kconfig
++++ b/drivers/media/usb/dvb-usb-v2/Kconfig
+@@ -147,3 +147,11 @@ config DVB_USB_RTL28XXU
+ help
+ Say Y here to support the Realtek RTL28xxU DVB USB receiver.
+
++config DVB_USB_DVBSKY
++ tristate "DVBSky USB2.0 support"
++ depends on DVB_USB_V2
++ select DVB_SIT2 if MEDIA_SUBDRV_AUTOSELECT
++ select DVB_DVBSKY_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
++ help
++ Say Y here to support the USB receivers from DVBSky.
++
+diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile
+index 2c06714..926f12d 100644
+--- a/drivers/media/usb/dvb-usb-v2/Makefile
++++ b/drivers/media/usb/dvb-usb-v2/Makefile
+@@ -40,6 +40,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
+ dvb-usb-rtl28xxu-objs := rtl28xxu.o
+ obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
+
++dvb-usb-dvbsky-objs := dvbsky.o
++obj-$(CONFIG_DVB_USB_DVBSKY) += dvb-usb-dvbsky.o
++
+ ccflags-y += -I$(srctree)/drivers/media/dvb-core
+ ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
+ ccflags-y += -I$(srctree)/drivers/media/tuners
+diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c b/drivers/media/usb/dvb-usb-v2/dvbsky.c
+new file mode 100644
+index 0000000..cd9c039
+--- /dev/null
++++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
+@@ -0,0 +1,892 @@
++/*
++ * Driver for DVBSky receiver
++ *
++ * Copyright (C) 2013 Max nibble <nibble.max(a)gmail.com>
++ *
++ * CIMax code is copied and modified from:
++ * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
++ * Copyright (C) 2009 NetUP Inc.
++ * Copyright (C) 2009 Igor M. Liplianin <liplianin(a)netup.ru>
++ * Copyright (C) 2009 Abylay Ospan <aospan(a)netup.ru>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include "dvb_ca_en50221.h"
++#include "dvb_usb.h"
++#include "dvbsky_m88ds3103.h"
++
++static int dvbsky_debug;
++module_param(dvbsky_debug, int, 0644);
++MODULE_PARM_DESC(dvbsky_debug, "Activates dvbsky usb debugging (default:0)");
++
++#define DVBSKY_MSG_DELAY 0/*2000*/
++#define DVBSKY_CI_CTL 0x04
++#define DVBSKY_CI_RD 1
++#define DVBSKY_BUF_LEN 64
++
++#define dprintk(args...) \
++ do { \
++ if (dvbsky_debug) \
++ printk(KERN_INFO "dvbsky_usb: " args); \
++ } while (0)
++
++DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
++
++struct dvbsky_state {
++ struct mutex stream_mutex;
++ u8 ibuf[DVBSKY_BUF_LEN];
++ u8 obuf[DVBSKY_BUF_LEN];
++ u8 has_ci;
++ u8 ci_attached;
++ struct dvb_ca_en50221 ci;
++ unsigned long next_status_checked_time;
++ u8 ci_i2c_addr;
++ u8 current_ci_flag;
++ int ci_status;
++};
++
++static int dvbsky_usb_generic_rw(struct dvb_usb_device *d,
++ u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
++{
++ int ret;
++ struct dvbsky_state *state = d_to_priv(d);
++
++ mutex_lock(&d->usb_mutex);
++ if (wlen != 0)
++ memcpy(state->obuf, wbuf, wlen);
++
++ ret = dvb_usbv2_generic_rw_locked(d, state->obuf, wlen,
++ state->ibuf, rlen);
++
++ if (!ret && (rlen != 0))
++ memcpy(rbuf, state->ibuf, rlen);
++
++ mutex_unlock(&d->usb_mutex);
++ return ret;
++}
++
++static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8 onoff)
++{
++ struct dvbsky_state *state = d_to_priv(d);
++ int ret;
++ u8 obuf_pre[3] = { 0x37, 0, 0 };
++ u8 obuf_post[3] = { 0x36, 3, 0 };
++ dprintk("%s() -off \n", __func__);
++ mutex_lock(&state->stream_mutex);
++ ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0);
++ if (!ret && onoff) {
++ msleep(20);
++ ret = dvbsky_usb_generic_rw(d, obuf_post, 3, NULL, 0);
++ dprintk("%s() -on \n", __func__);
++ }
++ mutex_unlock(&state->stream_mutex);
++ return ret;
++}
++
++/* CI opertaions */
++static int dvbsky_ci_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
++ u8 *buf, int len)
++{
++ int ret;
++ struct i2c_msg msg[] = {
++ {
++ .addr = addr,
++ .flags = 0,
++ .buf = ®,
++ .len = 1
++ }, {
++ .addr = addr,
++ .flags = I2C_M_RD,
++ .buf = buf,
++ .len = len
++ }
++ };
++
++ ret = i2c_transfer(i2c_adap, msg, 2);
++
++ if (ret != 2) {
++ dprintk("%s: error, Reg = 0x%02x, Status = %d\n", __func__, reg, ret);
++ return -1;
++ }
++ return 0;
++}
++
++static int dvbsky_ci_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
++ u8 *buf, int len)
++{
++ int ret;
++ u8 buffer[64];
++
++ struct i2c_msg msg = {
++ .addr = addr,
++ .flags = 0,
++ .buf = &buffer[0],
++ .len = len + 1
++ };
++
++ if(len + 1 > sizeof(buffer)) {
++ dprintk("%s: len overflow.\n", __func__);
++ return -1;
++ }
++
++ buffer[0] = reg;
++ memcpy(&buffer[1], buf, len);
++
++ ret = i2c_transfer(i2c_adap, &msg, 1);
++
++ if (ret != 1) {
++ dprintk("%s: error, Reg=[0x%02x], Status=%d\n", __func__, reg, ret);
++ return -1;
++ }
++ return 0;
++}
++
++static int dvbsky_ci_op_cam(struct dvb_ca_en50221 *ci, int slot,
++ u8 flag, u8 read, int addr, u8 data)
++{
++ struct dvb_usb_device *d = ci->data;
++ struct dvbsky_state *state = d_to_priv(d);
++ u8 store;
++ int ret;
++ u8 command[4], respond[2], command_size, respond_size;
++
++ /*dprintk("%s()\n", __func__);*/
++ if (0 != slot)
++ return -EINVAL;
++
++ if (state->current_ci_flag != flag) {
++ ret = dvbsky_ci_read_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &store, 1);
++ if (ret != 0)
++ return ret;
++
++ store &= ~0x0c;
++ store |= flag;
++
++ ret = dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &store, 1);
++ if (ret != 0)
++ return ret;
++ }
++ state->current_ci_flag = flag;
++
++ command[1] = (u8)((addr >> 8) & 0xff); /*high part of address*/
++ command[2] = (u8)(addr & 0xff); /*low part of address*/
++ if (read) {
++ command[0] = 0x71;
++ command_size = 3;
++ respond_size = 2;
++ } else {
++ command[0] = 0x70;
++ command[3] = data;
++ command_size = 4;
++ respond_size = 1;
++ }
++ ret = dvbsky_usb_generic_rw(d, command, command_size, respond, respond_size);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++
++ return (read) ? respond[1] : 0;
++}
++
++static int dvbsky_ci_read_attribute_mem(struct dvb_ca_en50221 *ci,
++ int slot, int addr)
++{
++ return dvbsky_ci_op_cam(ci, slot, 0, DVBSKY_CI_RD, addr, 0);
++}
++
++static int dvbsky_ci_write_attribute_mem(struct dvb_ca_en50221 *ci,
++ int slot, int addr, u8 data)
++{
++ return dvbsky_ci_op_cam(ci, slot, 0, 0, addr, data);
++}
++
++static int dvbsky_ci_read_cam_ctl(struct dvb_ca_en50221 *ci, int slot, u8 addr)
++{
++ return dvbsky_ci_op_cam(ci, slot, DVBSKY_CI_CTL, DVBSKY_CI_RD, addr, 0);
++}
++
++static int dvbsky_ci_write_cam_ctl(struct dvb_ca_en50221 *ci, int slot,
++ u8 addr, u8 data)
++{
++ return dvbsky_ci_op_cam(ci, slot, DVBSKY_CI_CTL, 0, addr, data);
++}
++
++static int dvbsky_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
++{
++ struct dvb_usb_device *d = ci->data;
++ struct dvbsky_state *state = d_to_priv(d);
++ u8 buf = 0x80;
++ int ret;
++ dprintk("%s() slot=%d\n", __func__, slot);
++
++ if (0 != slot)
++ return -EINVAL;
++
++ udelay(500);
++ ret = dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &buf, 1);
++
++ if (ret != 0)
++ return ret;
++
++ udelay(500);
++
++ buf = 0x00;
++ ret = dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &buf, 1);
++ msleep(1000);
++ dprintk("%s() slot=%d complete\n", __func__, slot);
++ return 0;
++
++}
++
++static int dvbsky_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
++{
++ /* not implemented */
++ dprintk("%s()\n", __func__);
++ return 0;
++}
++
++static int dvbsky_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
++{
++ struct dvb_usb_device *d = ci->data;
++ struct dvbsky_state *state = d_to_priv(d);
++ u8 buf;
++ int ret;
++
++ dprintk("%s()\n", __func__);
++ if (0 != slot)
++ return -EINVAL;
++
++ dvbsky_ci_read_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &buf, 1);
++ buf |= 0x60;
++
++ ret = dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &buf, 1);
++ return ret;
++}
++
++static int dvbsky_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
++ int open)
++{
++ struct dvb_usb_device *d = ci->data;
++ struct dvbsky_state *state = d_to_priv(d);
++ int ret = 0;
++ u8 buf = 0;
++ /*dprintk("%s()\n", __func__);*/
++
++ /* CAM module INSERT/REMOVE processing. slow operation because of i2c
++ * transfers */
++ if (time_after(jiffies, state->next_status_checked_time)) {
++ ret = dvbsky_ci_read_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &buf, 1);
++
++ /*dprintk("%s() status=%x\n", __func__, buf);*/
++
++ state->next_status_checked_time = jiffies
++ + msecs_to_jiffies(1000);
++
++ if (ret != 0)
++ return 0;
++
++ if (buf & 1) {
++ state->ci_status = DVB_CA_EN50221_POLL_CAM_PRESENT |
++ DVB_CA_EN50221_POLL_CAM_READY;
++ }
++ else
++ state->ci_status = 0;
++ }
++ /*dprintk("%s() ret=%x\n", __func__, state->ci_status);*/
++ return state->ci_status;
++}
++
++static int dvbsky_ci_init(struct dvb_usb_device *d)
++{
++ struct dvbsky_state *state = d_to_priv(d);
++ int ret;
++ u8 cimax_init[34] = {
++ 0x00, /* module A control*/
++ 0x00, /* auto select mask high A */
++ 0x00, /* auto select mask low A */
++ 0x00, /* auto select pattern high A */
++ 0x00, /* auto select pattern low A */
++ 0x44, /* memory access time A */
++ 0x00, /* invert input A */
++ 0x00, /* RFU */
++ 0x00, /* RFU */
++ 0x00, /* module B control*/
++ 0x00, /* auto select mask high B */
++ 0x00, /* auto select mask low B */
++ 0x00, /* auto select pattern high B */
++ 0x00, /* auto select pattern low B */
++ 0x44, /* memory access time B */
++ 0x00, /* invert input B */
++ 0x00, /* RFU */
++ 0x00, /* RFU */
++ 0x00, /* auto select mask high Ext */
++ 0x00, /* auto select mask low Ext */
++ 0x00, /* auto select pattern high Ext */
++ 0x00, /* auto select pattern low Ext */
++ 0x00, /* RFU */
++ 0x02, /* destination - module A */
++ 0x01, /* power on (use it like store place) */
++ 0x00, /* RFU */
++ 0x00, /* int status read only */
++ 0x00, /* Max: Disable the interrupt in USB solution.*/
++ 0x05, /* EXTINT=active-high, INT=push-pull */
++ 0x00, /* USCG1 */
++ 0x04, /* ack active low */
++ 0x00, /* LOCK = 0 */
++ 0x22, /* serial mode, rising in, rising out, MSB first*/
++ 0x00 /* synchronization */
++ };
++ dprintk("%s()\n", __func__);
++ state->current_ci_flag = 0xff;
++ state->ci_status = 0;
++ state->next_status_checked_time = jiffies + msecs_to_jiffies(1000);
++ state->ci_i2c_addr = 0x40;
++
++ state->ci.owner = THIS_MODULE;
++ state->ci.read_attribute_mem = dvbsky_ci_read_attribute_mem;
++ state->ci.write_attribute_mem = dvbsky_ci_write_attribute_mem;
++ state->ci.read_cam_control = dvbsky_ci_read_cam_ctl;
++ state->ci.write_cam_control = dvbsky_ci_write_cam_ctl;
++ state->ci.slot_reset = dvbsky_ci_slot_reset;
++ state->ci.slot_shutdown = dvbsky_ci_slot_shutdown;
++ state->ci.slot_ts_enable = dvbsky_ci_slot_ts_enable;
++ state->ci.poll_slot_status = dvbsky_ci_poll_slot_status;
++ state->ci.data = d;
++
++ ret = dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0, &cimax_init[0], 34);
++ /* lock registers */
++ ret |= dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0x1f, &cimax_init[0x18], 1);
++ /* power on slots */
++ ret |= dvbsky_ci_write_i2c(&d->i2c_adap, state->ci_i2c_addr,
++ 0x18, &cimax_init[0x18], 1);
++ if (0 != ret)
++ return ret;
++
++ ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
++ if (ret)
++ return ret;
++ state->ci_attached = 1;
++ dprintk("%s() complete.\n", __func__);
++ return 0;
++}
++
++static void dvbsky_ci_release(struct dvb_usb_device *d)
++{
++ struct dvbsky_state *state = d_to_priv(d);
++
++ /* detach CI */
++ if (state->ci_attached)
++ dvb_ca_en50221_release(&state->ci);
++
++ return;
++}
++
++static int dvbsky_streaming_ctrl(struct dvb_frontend *fe, int onoff)
++{
++ struct dvb_usb_device *d = fe_to_d(fe);
++ /*dprintk("%s() %d\n", __func__, onoff);*/
++ return dvbsky_stream_ctrl(d, (onoff == 0) ? 0 : 1);
++}
++
++/* GPIO */
++static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8 gport, u8 value)
++{
++ int ret;
++ u8 obuf[64], ibuf[64];
++ obuf[0] = 0x0e;
++ obuf[1] = gport;
++ obuf[2] = value;
++ ret = dvbsky_usb_generic_rw(d, obuf, 3, ibuf, 1);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++ return ret;
++}
++
++/* I2C */
++static int dvbsky_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
++ int num)
++{
++ struct dvb_usb_device *d = i2c_get_adapdata(adap);
++ int ret = 0;
++ u8 ibuf[64], obuf[64];
++
++ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
++ return -EAGAIN;
++
++ if (num > 2) {
++ printk(KERN_ERR "dvbsky_usb: too many i2c messages[%d] than 2.", num);
++ ret = -EOPNOTSUPP;
++ goto i2c_error;
++ }
++
++ if(num == 1) {
++ if (msg[0].len > 60) {
++ printk(KERN_ERR "dvbsky_usb: too many i2c bytes[%d] than 60.", msg[0].len);
++ ret = -EOPNOTSUPP;
++ goto i2c_error;
++ }
++ if (msg[0].flags & I2C_M_RD) {
++ /* single read */
++ obuf[0] = 0x09;
++ obuf[1] = 0;
++ obuf[2] = msg[0].len;
++ obuf[3] = msg[0].addr;
++ ret = dvbsky_usb_generic_rw(d, obuf, 4, ibuf, msg[0].len + 1);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++ /*dprintk("%s(): read status = %d\n", __func__, ibuf[0]);*/
++ if (!ret)
++ memcpy(msg[0].buf, &ibuf[1], msg[0].len);
++ } else {
++ /* write */
++ obuf[0] = 0x08;
++ obuf[1] = msg[0].addr;
++ obuf[2] = msg[0].len;
++ memcpy(&obuf[3], msg[0].buf, msg[0].len);
++ ret = dvbsky_usb_generic_rw(d, obuf, msg[0].len + 3, ibuf, 1);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++ /*dprintk("%s(): write status = %d\n", __func__, ibuf[0]);*/
++ }
++ } else {
++ if ((msg[0].len > 60) || (msg[1].len > 60)) {
++ printk(KERN_ERR "dvbsky_usb: too many i2c bytes[w-%d][r-%d] than 60.", msg[0].len, msg[1].len);
++ ret = -EOPNOTSUPP;
++ goto i2c_error;
++ }
++ /* write then read */
++ obuf[0] = 0x09;
++ obuf[1] = msg[0].len;
++ obuf[2] = msg[1].len;
++ obuf[3] = msg[0].addr;
++ memcpy(&obuf[4], msg[0].buf, msg[0].len);
++ ret = dvbsky_usb_generic_rw(d, obuf, msg[0].len + 4, ibuf, msg[1].len + 1);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++ /*dprintk("%s(): write then read status = %d\n", __func__, ibuf[0]);*/
++ if (!ret)
++ memcpy(msg[1].buf, &ibuf[1], msg[1].len);
++ }
++i2c_error:
++ mutex_unlock(&d->i2c_mutex);
++ return (ret) ? ret : num;
++}
++
++static u32 dvbsky_i2c_func(struct i2c_adapter *adapter)
++{
++ return I2C_FUNC_I2C;
++}
++
++static struct i2c_algorithm dvbsky_i2c_algo = {
++ .master_xfer = dvbsky_i2c_xfer,
++ .functionality = dvbsky_i2c_func,
++};
++
++#if IS_ENABLED(CONFIG_RC_CORE)
++static int dvbsky_rc_query(struct dvb_usb_device *d)
++{
++
++ u32 code = 0xffff, scancode;
++ u8 rc5_command, rc5_system;
++ u8 obuf[2], ibuf[2], toggle;
++ int ret;
++ obuf[0] = 0x10;
++ ret = dvbsky_usb_generic_rw(d, obuf, 1, ibuf, 2);
++ if(ret)
++ dev_err(&d->udev->dev, "%s: %s() " \
++ "failed=%d\n", KBUILD_MODNAME, __func__, ret);
++ if(ret == 0)
++ code = (ibuf[0] << 8) | ibuf[1];
++
++ if (code != 0xffff) {
++ dprintk("rc code: %x \n", code);
++ rc5_command = code & 0x3F;
++ rc5_system = (code & 0x7C0) >> 6;
++ toggle = (code & 0x800) ? 1 : 0;
++ scancode = rc5_system << 8 | rc5_command;
++ rc_keydown(d->rc_dev, scancode, toggle);
++ }
++ return 0;
++}
++
++static int dvbsky_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
++{
++ rc->allowed_protos = RC_BIT_RC5;
++ rc->query = dvbsky_rc_query;
++ rc->interval = 300;
++ return 0;
++}
++#else
++ #define dvbsky_get_rc_config NULL
++#endif
++
++static int dvbsky_sync_ctrl(struct dvb_frontend *fe)
++{
++ struct dvb_usb_device *d = fe_to_d(fe);
++ return dvbsky_stream_ctrl(d, 1);
++}
++
++static int dvbsky_usb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
++{
++ struct dvb_usb_device *d = fe_to_d(fe);
++ u8 value;
++
++ if (voltage == SEC_VOLTAGE_OFF)
++ value = 0;
++ else
++ value = 1;
++ return dvbsky_gpio_ctrl(d, 0x80, value);
++}
++
++static int dvbsky_usb_ci_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
++{
++ struct dvb_usb_device *d = fe_to_d(fe);
++ u8 value;
++
++ if (voltage == SEC_VOLTAGE_OFF)
++ value = 0;
++ else
++ value = 1;
++ return dvbsky_gpio_ctrl(d, 0x00, value);
++}
++
++static int dvbsky_t680c_attach(struct dvb_usb_adapter *adap)
++{
++ struct dvbsky_state *state = adap_to_priv(adap);
++ struct dvb_usb_device *d = adap_to_d(adap);
++ int ret = 0;
++
++ /*dprintk("%s, build on %s %s()\n", __func__, __DATE__,__TIME__);*/
++
++// adap->fe[0] = dvb_attach(sit2_attach,
++// &dvbsky_usb_sit2_config,
++// &d->i2c_adap);
++ if (!adap->fe[0]) {
++ printk(KERN_ERR "dvbsky_t680c_attach fail.");
++ ret = -ENODEV;
++ }
++
++ state->has_ci = 1;
++
++ return ret;
++}
++
++static int dvbsky_t330_attach(struct dvb_usb_adapter *adap)
++{
++ struct dvbsky_state *state = adap_to_priv(adap);
++ struct dvb_usb_device *d = adap_to_d(adap);
++ int ret = 0;
++
++ /*dprintk("%s, build on %s %s()\n", __func__, __DATE__,__TIME__);*/
++
++// adap->fe[0] = dvb_attach(sit2_attach,
++// &dvbsky_t330_sit2_config,
++// &d->i2c_adap);
++ if (!adap->fe[0]) {
++ printk(KERN_ERR "dvbsky_t330_attach fail.");
++ ret = -ENODEV;
++ }
++
++ state->has_ci = 0;
++
++ return ret;
++}
++
++static int dvbsky_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6])
++{
++ struct dvb_usb_device *d = adap_to_d(adap);
++ u8 obuf[] = { 0x1e, 0x00 };
++ u8 ibuf[6] = { 0 };
++ struct i2c_msg msg[] = {
++ {
++ .addr = 0x51,
++ .flags = 0,
++ .buf = obuf,
++ .len = 2,
++ }, {
++ .addr = 0x51,
++ .flags = I2C_M_RD,
++ .buf = ibuf,
++ .len = 6,
++
++ }
++ };
++
++ if (i2c_transfer(&d->i2c_adap, msg, 2) == 2)
++ memcpy(mac, ibuf, 6);
++
++ printk(KERN_INFO "dvbsky_usb MAC address=%pM\n", mac);
++
++ return 0;
++}
++
++static struct dvbsky_m88ds3103_config dvbsky_usb_ds3103_config = {
++ .demod_address = 0x68,
++ .ci_mode = 1,
++ .pin_ctrl = 0x83,
++ .ts_mode = 0,
++ .start_ctrl = dvbsky_sync_ctrl,
++ .set_voltage = dvbsky_usb_set_voltage,
++};
++
++static int dvbsky_s960_attach(struct dvb_usb_adapter *adap)
++{
++ struct dvbsky_state *state = adap_to_priv(adap);
++ struct dvb_usb_device *d = adap_to_d(adap);
++ int ret = 0;
++
++ dprintk("%s()\n", __func__);
++
++ adap->fe[0] = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_usb_ds3103_config,
++ &d->i2c_adap);
++ if (!adap->fe[0]) {
++ printk(KERN_ERR "dvbsky_s960_attach fail.");
++ ret = -ENODEV;
++ }
++
++ state->has_ci = 0;
++
++ return ret;
++}
++
++static struct dvbsky_m88ds3103_config dvbsky_usb_ds3103_ci_config = {
++ .demod_address = 0x68,
++ .ci_mode = 2,
++ .pin_ctrl = 0x82,
++ .ts_mode = 0,
++ .start_ctrl = dvbsky_sync_ctrl,
++ .set_voltage = dvbsky_usb_ci_set_voltage,
++};
++static int dvbsky_s960c_attach(struct dvb_usb_adapter *adap)
++{
++ struct dvbsky_state *state = adap_to_priv(adap);
++ struct dvb_usb_device *d = adap_to_d(adap);
++ int ret = 0;
++
++ /*dprintk("%s, build on %s %s()\n", __func__, __DATE__,__TIME__);*/
++
++ adap->fe[0] = dvb_attach(dvbsky_m88ds3103_attach,
++ &dvbsky_usb_ds3103_ci_config,
++ &d->i2c_adap);
++ if (!adap->fe[0]) {
++ printk(KERN_ERR "dvbsky_s960c_attach fail.");
++ ret = -ENODEV;
++ }
++
++ state->has_ci = 1;
++
++ return ret;
++}
++
++static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
++{
++ /*
++ printk(KERN_INFO "%s, build on %s %s(),delay=%d\n",
++ __func__, __DATE__,__TIME__,d->props->generic_bulk_ctrl_delay);
++ */
++ dvbsky_gpio_ctrl(d, 0x04, 1);
++ msleep(20);
++ dvbsky_gpio_ctrl(d, 0x83, 0);
++ dvbsky_gpio_ctrl(d, 0xc0, 1);
++ msleep(100);
++ dvbsky_gpio_ctrl(d, 0x83, 1);
++ dvbsky_gpio_ctrl(d, 0xc0, 0);
++ msleep(50);
++
++ return WARM;
++}
++
++static int dvbsky_init(struct dvb_usb_device *d)
++{
++ struct dvbsky_state *state = d_to_priv(d);
++ int ret;
++
++ /* use default interface */
++ /*
++ ret = usb_set_interface(d->udev, 0, 0);
++ if (ret)
++ return ret;
++ */
++ mutex_init(&state->stream_mutex);
++
++ /* attach CI */
++ if (state->has_ci) {
++ state->ci_attached = 0;
++ ret = dvbsky_ci_init(d);
++ if (ret)
++ return ret;
++ }
++ return 0;
++}
++
++static void dvbsky_exit(struct dvb_usb_device *d)
++{
++ return dvbsky_ci_release(d);
++}
++
++/* DVB USB Driver stuff */
++static struct dvb_usb_device_properties dvbsky_t330_props = {
++ .driver_name = KBUILD_MODNAME,
++ .owner = THIS_MODULE,
++ .adapter_nr = adapter_nr,
++ .size_of_priv = sizeof(struct dvbsky_state),
++
++ .generic_bulk_ctrl_endpoint = 0x01,
++ .generic_bulk_ctrl_endpoint_response = 0x81,
++ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
++
++ .i2c_algo = &dvbsky_i2c_algo,
++ .frontend_attach = dvbsky_t330_attach,
++ .init = dvbsky_init,
++ .get_rc_config = dvbsky_get_rc_config,
++ .streaming_ctrl = dvbsky_streaming_ctrl,
++ .identify_state = dvbsky_identify_state,
++ .exit = dvbsky_exit,
++ .read_mac_address = dvbsky_read_mac_addr,
++
++ .num_adapters = 1,
++ .adapter = {
++ {
++ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
++ }
++ }
++};
++
++static struct dvb_usb_device_properties dvbsky_s960c_props = {
++ .driver_name = KBUILD_MODNAME,
++ .owner = THIS_MODULE,
++ .adapter_nr = adapter_nr,
++ .size_of_priv = sizeof(struct dvbsky_state),
++
++ .generic_bulk_ctrl_endpoint = 0x01,
++ .generic_bulk_ctrl_endpoint_response = 0x81,
++ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
++
++ .i2c_algo = &dvbsky_i2c_algo,
++ .frontend_attach = dvbsky_s960c_attach,
++ .init = dvbsky_init,
++ .get_rc_config = dvbsky_get_rc_config,
++ .streaming_ctrl = dvbsky_streaming_ctrl,
++ .identify_state = dvbsky_identify_state,
++ .exit = dvbsky_exit,
++ .read_mac_address = dvbsky_read_mac_addr,
++
++ .num_adapters = 1,
++ .adapter = {
++ {
++ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
++ }
++ }
++};
++
++static struct dvb_usb_device_properties dvbsky_t680c_props = {
++ .driver_name = KBUILD_MODNAME,
++ .owner = THIS_MODULE,
++ .adapter_nr = adapter_nr,
++ .size_of_priv = sizeof(struct dvbsky_state),
++
++ .generic_bulk_ctrl_endpoint = 0x01,
++ .generic_bulk_ctrl_endpoint_response = 0x81,
++ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
++
++ .i2c_algo = &dvbsky_i2c_algo,
++ .frontend_attach = dvbsky_t680c_attach,
++ .init = dvbsky_init,
++ .get_rc_config = dvbsky_get_rc_config,
++ .streaming_ctrl = dvbsky_streaming_ctrl,
++ .identify_state = dvbsky_identify_state,
++ .exit = dvbsky_exit,
++ .read_mac_address = dvbsky_read_mac_addr,
++
++ .num_adapters = 1,
++ .adapter = {
++ {
++ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
++ }
++ }
++};
++
++static struct dvb_usb_device_properties dvbsky_s960_props = {
++ .driver_name = KBUILD_MODNAME,
++ .owner = THIS_MODULE,
++ .adapter_nr = adapter_nr,
++ .size_of_priv = sizeof(struct dvbsky_state),
++
++ .generic_bulk_ctrl_endpoint = 0x01,
++ .generic_bulk_ctrl_endpoint_response = 0x81,
++ .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
++
++ .i2c_algo = &dvbsky_i2c_algo,
++ .frontend_attach = dvbsky_s960_attach,
++ .init = dvbsky_init,
++ .get_rc_config = dvbsky_get_rc_config,
++ .streaming_ctrl = dvbsky_streaming_ctrl,
++ .identify_state = dvbsky_identify_state,
++ .exit = dvbsky_exit,
++ .read_mac_address = dvbsky_read_mac_addr,
++
++ .num_adapters = 1,
++ .adapter = {
++ {
++ .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
++ }
++ }
++};
++
++static const struct usb_device_id dvbsky_id_table[] = {
++ { DVB_USB_DEVICE(0x0572, 0x0320,
++ &dvbsky_t330_props, "DVBSky T330 USB Stick", RC_MAP_DVBSKY) },
++ { DVB_USB_DEVICE(0x0572, 0x960c,
++ &dvbsky_s960c_props, "DVBSky S960CI", RC_MAP_DVBSKY) },
++ { DVB_USB_DEVICE(0x0572, 0x680c,
++ &dvbsky_t680c_props, "DVBSky T680CI", RC_MAP_DVBSKY) },
++ { DVB_USB_DEVICE(0x0572, 0x6831,
++ &dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
++ { }
++};
++MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
++
++static struct usb_driver dvbsky_usb_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = dvbsky_id_table,
++ .probe = dvb_usbv2_probe,
++ .disconnect = dvb_usbv2_disconnect,
++ .suspend = dvb_usbv2_suspend,
++ .resume = dvb_usbv2_resume,
++ .reset_resume = dvb_usbv2_reset_resume,
++ .no_dynamic_id = 1,
++ .soft_unbind = 1,
++};
++
++module_usb_driver(dvbsky_usb_driver);
++
++MODULE_AUTHOR("Max nibble <nibble.max(a)gmail.com>");
++MODULE_DESCRIPTION("Driver for DVBSky USB2.0");
++MODULE_LICENSE("GPL");
+diff --git a/include/media/rc-map.h b/include/media/rc-map.h
+index a20ed97..73f8c92 100644
+--- a/include/media/rc-map.h
++++ b/include/media/rc-map.h
+@@ -119,6 +119,7 @@ void rc_map_init(void);
+ #define RC_MAP_DM1105_NEC "rc-dm1105-nec"
+ #define RC_MAP_DNTV_LIVE_DVBT_PRO "rc-dntv-live-dvbt-pro"
+ #define RC_MAP_DNTV_LIVE_DVB_T "rc-dntv-live-dvb-t"
++#define RC_MAP_DVBSKY "rc-dvbsky"
+ #define RC_MAP_EMPTY "rc-empty"
+ #define RC_MAP_EM_TERRATEC "rc-em-terratec"
+ #define RC_MAP_ENCORE_ENLTV2 "rc-encore-enltv2"
diff --git a/src/patches/linux-3.14.22-imq.patch b/src/patches/linux-3.14.22-imq.patch
new file mode 100644
index 0000000..219d4fb
--- /dev/null
+++ b/src/patches/linux-3.14.22-imq.patch
@@ -0,0 +1,1767 @@
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index 494b888..851e01f 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -203,6 +203,125 @@ config RIONET_RX_SIZE
+ depends on RIONET
+ default "128"
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing
++ disciplines. Every packet entering/leaving the IP stack can be
++ directed through the IMQ device where it's enqueued/dequeued to the
++ attached qdisc. This allows you to treat network devices as classes
++ and distribute bandwidth among them. Iptables is used to specify
++ through which IMQ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_AB
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This setting defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++ int "Number of IMQ devices"
++ range 2 16
++ depends on IMQ
++ default "16"
++ help
++ This setting defines how many IMQ devices will be created.
++
++ The default value is 16.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config TUN
+ tristate "Universal TUN/TAP device driver support"
+ select CRC32
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 3fef8a8..12dafc0 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -9,6 +9,7 @@ obj-$(CONFIG_BONDING) += bonding/
+ obj-$(CONFIG_DUMMY) += dummy.o
+ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_IFB) += ifb.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_MACVTAP) += macvtap.o
+ obj-$(CONFIG_MII) += mii.o
+diff --git a/drivers/net/imq.c b/drivers/net/imq.c
+new file mode 100644
+index 0000000..2140535
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,1011 @@
++/*
++ * Pseudo-driver for the intermediate queue device.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Patrick McHardy, <kaber(a)trash.net>
++ *
++ * The first version was written by Martin Devera, <devik(a)cdi.cz>
++ *
++ * Credits: Jan Rafaj <imq2t(a)cedric.vabo.cz>
++ * - Update patch to 2.4.21
++ * Sebastian Strollo <sstrollo(a)nortelnetworks.com>
++ * - Fix "Dead-loop on netdevice imq"-issue
++ * Marcel Sebek <sebek64(a)post.cz>
++ * - Update to 2.6.2-rc1
++ *
++ * After some time of inactivity there is a group taking care
++ * of IMQ again: http://www.linuximq.net
++ *
++ *
++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ * including the following changes:
++ *
++ * - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ * - Correction of imq_init_devs() issue that resulted in
++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ * - Addition of functionality to choose number of IMQ devices
++ * during kernel config (Andre Correa)
++ * - Addition of functionality to choose how IMQ hooks on
++ * PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ * released with almost no problems. 2.6.14-x was released
++ * with some important changes: nfcache was removed; After
++ * some weeks of trouble we figured out that some IMQ fields
++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ * These functions are correctly patched by this new patch version.
++ *
++ * Thanks for all who helped to figure out all the problems with
++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ * I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ * 2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead
++ * of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ * recursive locking. New initialization routines to fix 'rmmod' not
++ * working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ * 2008/08/06 - 2.6.26 - (JK)
++ * - Replaced tasklet with 'netif_schedule()'.
++ * - Cleaned up and added comments for imq_nf_queue().
++ *
++ * 2009/04/12
++ * - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ * control buffer. This is needed because qdisc-layer on kernels
++ * 2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ * - Add better locking for IMQ device. Hopefully this will solve
++ * SMP issues. (Jussi Kivilinna)
++ * - Port to 2.6.27
++ * - Port to 2.6.28
++ * - Port to 2.6.29 + fix rmmod not working
++ *
++ * 2009/04/20 - (Jussi Kivilinna)
++ * - Use netdevice feature flags to avoid extra packet handling
++ * by core networking layer and possibly increase performance.
++ *
++ * 2009/09/26 - (Jussi Kivilinna)
++ * - Add imq_nf_reinject_lockless to fix deadlock with
++ * imq_nf_queue/imq_nf_reinject.
++ *
++ * 2009/12/08 - (Jussi Kivilinna)
++ * - Port to 2.6.32
++ * - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ * - Also add better error checking for skb->nf_queue_entry usage
++ *
++ * 2010/02/25 - (Jussi Kivilinna)
++ * - Port to 2.6.33
++ *
++ * 2010/08/15 - (Jussi Kivilinna)
++ * - Port to 2.6.35
++ * - Simplify hook registration by using nf_register_hooks.
++ * - nf_reinject doesn't need spinlock around it, therefore remove
++ * imq_nf_reinject function. Other nf_reinject users protect
++ * their own data with spinlock. With IMQ however all data is
++ * needed is stored per skbuff, so no locking is needed.
++ * - Changed IMQ to use 'separate' NF_IMQ_QUEUE instead of
++ * NF_QUEUE, this allows working coexistance of IMQ and other
++ * NF_QUEUE users.
++ * - Make IMQ multi-queue. Number of IMQ device queues can be
++ * increased with 'numqueues' module parameters. Default number
++ * of queues is 1, in other words by default IMQ works as
++ * single-queue device. Multi-queue selection is based on
++ * IFB multi-queue patch by Changli Gao <xiaosuo(a)gmail.com>.
++ *
++ * 2011/03/18 - (Jussi Kivilinna)
++ * - Port to 2.6.38
++ *
++ * 2011/07/12 - (syoder89(a)gmail.com)
++ * - Crash fix that happens when the receiving interface has more
++ * than one queue (add missing skb_set_queue_mapping in
++ * imq_select_queue).
++ *
++ * 2011/07/26 - (Jussi Kivilinna)
++ * - Add queue mapping checks for packets exiting IMQ.
++ * - Port to 3.0
++ *
++ * 2011/08/16 - (Jussi Kivilinna)
++ * - Clear IFF_TX_SKB_SHARING flag that was added for linux 3.0.2
++ *
++ * 2011/11/03 - Germano Michel <germanomichel(a)gmail.com>
++ * - Fix IMQ for net namespaces
++ *
++ * 2011/11/04 - Jussi Kivilinna <jussi.kivilinna(a)mbnet.fi>
++ * - Port to 3.1
++ * - Clean-up, move 'get imq device pointer by imqX name' to
++ * separate function from imq_nf_queue().
++ *
++ * 2012/01/05 - Jussi Kivilinna <jussi.kivilinna(a)mbnet.fi>
++ * - Port to 3.2
++ *
++ * 2012/03/19 - Jussi Kivilinna <jussi.kivilinna(a)mbnet.fi>
++ * - Port to 3.3
++ *
++ * 2012/12/12 - Jussi Kivilinna <jussi.kivilinna(a)mbnet.fi>
++ * - Port to 3.7
++ * - Fix checkpatch.pl warnings
++ *
++ * 2013/09/10 - Jussi Kivilinna <jussi.kivilinna(a)iki.fi>
++ * - Fixed GSO handling for 3.10, see imq_nf_queue() for comments.
++ * - Don't copy skb->cb_next when copying or cloning skbuffs.
++ *
++ * 2013/09/16 - Jussi Kivilinna <jussi.kivilinna(a)iki.fi>
++ * - Port to 3.11
++ *
++ * 2013/11/12 - Jussi Kivilinna <jussi.kivilinna(a)iki.fi>
++ * - Port to 3.12
++ *
++ * 2014/02/07 - Jussi Kivilinna <jussi.kivilinna(a)iki.fi>
++ * - Port to 3.13
++ *
++ * Also, many thanks to pablo Sebastian Greco for making the initial
++ * patch and to those who helped the testing.
++ *
++ * More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ #include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++#include <net/sock.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <linux/if_vlan.h>
++#include <linux/if_pppox.h>
++#include <net/ip.h>
++#include <net/ipv6.h>
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num);
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ops[] = {
++ {
++ /* imq_ingress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv4 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP_PRI_LAST,
++#else
++ .priority = NF_IP_PRI_NAT_SRC - 1,
++#endif
++ },
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ {
++ /* imq_ingress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP6_PRI_MANGLE + 1,
++#else
++ .priority = NF_IP6_PRI_NAT_DST + 1,
++#endif
++ },
++ {
++ /* imq_egress_ipv6 */
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP6_PRI_LAST,
++#else
++ .priority = NF_IP6_PRI_NAT_SRC - 1,
++#endif
++ },
++#endif
++};
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++#define IMQ_MAX_QUEUES 32
++static int numqueues = 1;
++static u32 imq_hashrnd;
++
++static inline __be16 pppoe_proto(const struct sk_buff *skb)
++{
++ return *((__be16 *)(skb_mac_header(skb) + ETH_HLEN +
++ sizeof(struct pppoe_hdr)));
++}
++
++static u16 imq_hash(struct net_device *dev, struct sk_buff *skb)
++{
++ unsigned int pull_len;
++ u16 protocol = skb->protocol;
++ u32 addr1, addr2;
++ u32 hash, ihl = 0;
++ union {
++ u16 in16[2];
++ u32 in32;
++ } ports;
++ u8 ip_proto;
++
++ pull_len = 0;
++
++recheck:
++ switch (protocol) {
++ case htons(ETH_P_8021Q): {
++ if (unlikely(skb_pull(skb, VLAN_HLEN) == NULL))
++ goto other;
++
++ pull_len += VLAN_HLEN;
++ skb->network_header += VLAN_HLEN;
++
++ protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
++ goto recheck;
++ }
++
++ case htons(ETH_P_PPP_SES): {
++ if (unlikely(skb_pull(skb, PPPOE_SES_HLEN) == NULL))
++ goto other;
++
++ pull_len += PPPOE_SES_HLEN;
++ skb->network_header += PPPOE_SES_HLEN;
++
++ protocol = pppoe_proto(skb);
++ goto recheck;
++ }
++
++ case htons(ETH_P_IP): {
++ const struct iphdr *iph = ip_hdr(skb);
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr))))
++ goto other;
++
++ addr1 = iph->daddr;
++ addr2 = iph->saddr;
++
++ ip_proto = !(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ?
++ iph->protocol : 0;
++ ihl = ip_hdrlen(skb);
++
++ break;
++ }
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++ case htons(ETH_P_IPV6): {
++ const struct ipv6hdr *iph = ipv6_hdr(skb);
++ __be16 fo = 0;
++
++ if (unlikely(!pskb_may_pull(skb, sizeof(struct ipv6hdr))))
++ goto other;
++
++ addr1 = iph->daddr.s6_addr32[3];
++ addr2 = iph->saddr.s6_addr32[3];
++ ihl = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &ip_proto,
++ &fo);
++ if (unlikely(ihl < 0))
++ goto other;
++
++ break;
++ }
++#endif
++ default:
++other:
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ return (u16)(ntohs(protocol) % dev->real_num_tx_queues);
++ }
++
++ if (addr1 > addr2)
++ swap(addr1, addr2);
++
++ switch (ip_proto) {
++ case IPPROTO_TCP:
++ case IPPROTO_UDP:
++ case IPPROTO_DCCP:
++ case IPPROTO_ESP:
++ case IPPROTO_AH:
++ case IPPROTO_SCTP:
++ case IPPROTO_UDPLITE: {
++ if (likely(skb_copy_bits(skb, ihl, &ports.in32, 4) >= 0)) {
++ if (ports.in16[0] > ports.in16[1])
++ swap(ports.in16[0], ports.in16[1]);
++ break;
++ }
++ /* fall-through */
++ }
++ default:
++ ports.in32 = 0;
++ break;
++ }
++
++ if (pull_len != 0) {
++ skb_push(skb, pull_len);
++ skb->network_header -= pull_len;
++ }
++
++ hash = jhash_3words(addr1, addr2, ports.in32, imq_hashrnd ^ ip_proto);
++
++ return (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++}
++
++static inline bool sk_tx_queue_recorded(struct sock *sk)
++{
++ return (sk_tx_queue_get(sk) >= 0);
++}
++
++static struct netdev_queue *imq_select_queue(struct net_device *dev,
++ struct sk_buff *skb)
++{
++ u16 queue_index = 0;
++ u32 hash;
++
++ if (likely(dev->real_num_tx_queues == 1))
++ goto out;
++
++ /* IMQ can be receiving ingress or engress packets. */
++
++ /* Check first for if rx_queue is set */
++ if (skb_rx_queue_recorded(skb)) {
++ queue_index = skb_get_rx_queue(skb);
++ goto out;
++ }
++
++ /* Check if socket has tx_queue set */
++ if (sk_tx_queue_recorded(skb->sk)) {
++ queue_index = sk_tx_queue_get(skb->sk);
++ goto out;
++ }
++
++ /* Try use socket hash */
++ if (skb->sk && skb->sk->sk_hash) {
++ hash = skb->sk->sk_hash;
++ queue_index =
++ (u16)(((u64)hash * dev->real_num_tx_queues) >> 32);
++ goto out;
++ }
++
++ /* Generate hash from packet data */
++ queue_index = imq_hash(dev, skb);
++
++out:
++ if (unlikely(queue_index >= dev->real_num_tx_queues))
++ queue_index = (u16)((u32)queue_index % dev->real_num_tx_queues);
++
++ skb_set_queue_mapping(skb, queue_index);
++ return netdev_get_tx_queue(dev, queue_index);
++}
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++ return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++
++ if (entry) {
++ nf_queue_entry_release_refs(entry);
++ kfree(entry);
++ }
++
++ skb_restore_cb(skb); /* kfree backup */
++}
++
++static void imq_done_check_queue_mapping(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ unsigned int queue_index;
++
++ /* Don't let queue_mapping be left too large after exiting IMQ */
++ if (likely(skb->dev != dev && skb->dev != NULL)) {
++ queue_index = skb_get_queue_mapping(skb);
++ if (unlikely(queue_index >= skb->dev->real_num_tx_queues)) {
++ queue_index = (u16)((u32)queue_index %
++ skb->dev->real_num_tx_queues);
++ skb_set_queue_mapping(skb, queue_index);
++ }
++ } else {
++ /* skb->dev was IMQ device itself or NULL, be on safe side and
++ * just clear queue mapping.
++ */
++ skb_set_queue_mapping(skb, 0);
++ }
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++ skb->nf_queue_entry = NULL;
++ dev->trans_start = jiffies;
++
++ dev->stats.tx_bytes += skb->len;
++ dev->stats.tx_packets++;
++
++ if (unlikely(entry == NULL)) {
++ /* We don't know what is going on here.. packet is queued for
++ * imq device, but (probably) not by us.
++ *
++ * If this packet was not send here by imq_nf_queue(), then
++ * skb_save_cb() was not used and skb_free() should not show:
++ * WARNING: IMQ: kfree_skb: skb->cb_next:..
++ * and/or
++ * WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++ *
++ * However if this message is shown, then IMQ is somehow broken
++ * and you should report this to linuximq.net.
++ */
++
++ /* imq_dev_xmit is black hole that eats all packets, report that
++ * we eat this packet happily and increase dropped counters.
++ */
++
++ dev->stats.tx_dropped++;
++ dev_kfree_skb(skb);
++
++ return NETDEV_TX_OK;
++ }
++
++ skb_restore_cb(skb); /* restore skb->cb */
++
++ skb->imq_flags = 0;
++ skb->destructor = NULL;
++
++ imq_done_check_queue_mapping(skb, dev);
++
++ nf_reinject(entry, NF_ACCEPT);
++
++ return NETDEV_TX_OK;
++}
++
++static struct net_device *get_imq_device_by_index(int index)
++{
++ struct net_device *dev = NULL;
++ struct net *net;
++ char buf[8];
++
++ /* get device by name and cache result */
++ snprintf(buf, sizeof(buf), "imq%d", index);
++
++ /* Search device from all namespaces. */
++ for_each_net(net) {
++ dev = dev_get_by_name(net, buf);
++ if (dev)
++ break;
++ }
++
++ if (WARN_ON_ONCE(dev == NULL)) {
++ /* IMQ device not found. Exotic config? */
++ return ERR_PTR(-ENODEV);
++ }
++
++ imq_devs_cache[index] = dev;
++ dev_put(dev);
++
++ return dev;
++}
++
++static struct nf_queue_entry *nf_queue_entry_dup(struct nf_queue_entry *e)
++{
++ struct nf_queue_entry *entry = kmemdup(e, e->size, GFP_ATOMIC);
++ if (entry) {
++ if (nf_queue_entry_get_refs(entry))
++ return entry;
++ kfree(entry);
++ }
++ return NULL;
++}
++
++#ifdef CONFIG_BRIDGE_NETFILTER
++/* When called from bridge netfilter, skb->data must point to MAC header
++ * before calling skb_gso_segment(). Else, original MAC header is lost
++ * and segmented skbs will be sent to wrong destination.
++ */
++static void nf_bridge_adjust_skb_data(struct sk_buff *skb)
++{
++ if (skb->nf_bridge)
++ __skb_push(skb, skb->network_header - skb->mac_header);
++}
++
++static void nf_bridge_adjust_segmented_data(struct sk_buff *skb)
++{
++ if (skb->nf_bridge)
++ __skb_pull(skb, skb->network_header - skb->mac_header);
++}
++#else
++#define nf_bridge_adjust_skb_data(s) do {} while (0)
++#define nf_bridge_adjust_segmented_data(s) do {} while (0)
++#endif
++
++static void free_entry(struct nf_queue_entry *entry)
++{
++ nf_queue_entry_release_refs(entry);
++ kfree(entry);
++}
++
++static int __imq_nf_queue(struct nf_queue_entry *entry, struct net_device *dev);
++
++static int __imq_nf_queue_gso(struct nf_queue_entry *entry,
++ struct net_device *dev, struct sk_buff *skb)
++{
++ int ret = -ENOMEM;
++ struct nf_queue_entry *entry_seg;
++
++ nf_bridge_adjust_segmented_data(skb);
++
++ if (skb->next == NULL) { /* last packet, no need to copy entry */
++ struct sk_buff *gso_skb = entry->skb;
++ entry->skb = skb;
++ ret = __imq_nf_queue(entry, dev);
++ if (ret)
++ entry->skb = gso_skb;
++ return ret;
++ }
++
++ skb->next = NULL;
++
++ entry_seg = nf_queue_entry_dup(entry);
++ if (entry_seg) {
++ entry_seg->skb = skb;
++ ret = __imq_nf_queue(entry_seg, dev);
++ if (ret)
++ free_entry(entry_seg);
++ }
++ return ret;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++ struct sk_buff *skb, *segs;
++ struct net_device *dev;
++ unsigned int queued;
++ int index, retval, err;
++
++ index = entry->skb->imq_flags & IMQ_F_IFMASK;
++ if (unlikely(index > numdevs - 1)) {
++ if (net_ratelimit())
++ pr_warn("IMQ: invalid device specified, highest is %u\n",
++ numdevs - 1);
++ retval = -EINVAL;
++ goto out_no_dev;
++ }
++
++ /* check for imq device by index from cache */
++ dev = imq_devs_cache[index];
++ if (unlikely(!dev)) {
++ dev = get_imq_device_by_index(index);
++ if (IS_ERR(dev)) {
++ retval = PTR_ERR(dev);
++ goto out_no_dev;
++ }
++ }
++
++ if (unlikely(!(dev->flags & IFF_UP))) {
++ entry->skb->imq_flags = 0;
++ retval = -ECANCELED;
++ goto out_no_dev;
++ }
++
++ if (!skb_is_gso(entry->skb))
++ return __imq_nf_queue(entry, dev);
++
++ /* Since 3.10.x, GSO handling moved here as result of upstream commit
++ * a5fedd43d5f6c94c71053a66e4c3d2e35f1731a2 (netfilter: move
++ * skb_gso_segment into nfnetlink_queue module).
++ *
++ * Following code replicates the gso handling from
++ * 'net/netfilter/nfnetlink_queue_core.c':nfqnl_enqueue_packet().
++ */
++
++ skb = entry->skb;
++
++ switch (entry->pf) {
++ case NFPROTO_IPV4:
++ skb->protocol = htons(ETH_P_IP);
++ break;
++ case NFPROTO_IPV6:
++ skb->protocol = htons(ETH_P_IPV6);
++ break;
++ }
++
++ nf_bridge_adjust_skb_data(skb);
++ segs = skb_gso_segment(skb, 0);
++ /* Does not use PTR_ERR to limit the number of error codes that can be
++ * returned by nf_queue. For instance, callers rely on -ECANCELED to
++ * mean 'ignore this hook'.
++ */
++ err = -ENOBUFS;
++ if (IS_ERR(segs))
++ goto out_err;
++ queued = 0;
++ err = 0;
++ do {
++ struct sk_buff *nskb = segs->next;
++ if (nskb && nskb->next)
++ nskb->cb_next = NULL;
++ if (err == 0)
++ err = __imq_nf_queue_gso(entry, dev, segs);
++ if (err == 0)
++ queued++;
++ else
++ kfree_skb(segs);
++ segs = nskb;
++ } while (segs);
++
++ if (queued) {
++ if (err) /* some segments are already queued */
++ free_entry(entry);
++ kfree_skb(skb);
++ return 0;
++ }
++
++out_err:
++ nf_bridge_adjust_segmented_data(skb);
++ retval = err;
++out_no_dev:
++ return retval;
++}
++
++static int __imq_nf_queue(struct nf_queue_entry *entry, struct net_device *dev)
++{
++ struct sk_buff *skb_orig, *skb, *skb_shared;
++ struct Qdisc *q;
++ struct netdev_queue *txq;
++ spinlock_t *root_lock;
++ int users;
++ int retval = -EINVAL;
++ unsigned int orig_queue_index;
++
++ dev->last_rx = jiffies;
++
++ skb = entry->skb;
++ skb_orig = NULL;
++
++ /* skb has owner? => make clone */
++ if (unlikely(skb->destructor)) {
++ skb_orig = skb;
++ skb = skb_clone(skb, GFP_ATOMIC);
++ if (unlikely(!skb)) {
++ retval = -ENOMEM;
++ goto out;
++ }
++ skb->cb_next = NULL;
++ entry->skb = skb;
++ }
++
++ skb->nf_queue_entry = entry;
++
++ dev->stats.rx_bytes += skb->len;
++ dev->stats.rx_packets++;
++
++ if (!skb->dev) {
++ /* skb->dev == NULL causes problems, try the find cause. */
++ if (net_ratelimit()) {
++ dev_warn(&dev->dev,
++ "received packet with skb->dev == NULL\n");
++ dump_stack();
++ }
++
++ skb->dev = dev;
++ }
++
++ /* Disables softirqs for lock below */
++ rcu_read_lock_bh();
++
++ /* Multi-queue selection */
++ orig_queue_index = skb_get_queue_mapping(skb);
++ txq = imq_select_queue(dev, skb);
++
++ q = rcu_dereference(txq->qdisc);
++ if (unlikely(!q->enqueue))
++ goto packet_not_eaten_by_imq_dev;
++
++ root_lock = qdisc_lock(q);
++ spin_lock(root_lock);
++
++ users = atomic_read(&skb->users);
++
++ skb_shared = skb_get(skb); /* increase reference count by one */
++
++ /* backup skb->cb, as qdisc layer will overwrite it */
++ skb_save_cb(skb_shared);
++ qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++ if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++ kfree_skb(skb_shared); /* decrease reference count by one */
++
++ skb->destructor = &imq_skb_destructor;
++
++ /* cloned? */
++ if (unlikely(skb_orig))
++ kfree_skb(skb_orig); /* free original */
++
++ spin_unlock(root_lock);
++ rcu_read_unlock_bh();
++
++ /* schedule qdisc dequeue */
++ __netif_schedule(q);
++
++ retval = 0;
++ goto out;
++ } else {
++ skb_restore_cb(skb_shared); /* restore skb->cb */
++ skb->nf_queue_entry = NULL;
++ /*
++ * qdisc dropped packet and decreased skb reference count of
++ * skb, so we don't really want to and try refree as that would
++ * actually destroy the skb.
++ */
++ spin_unlock(root_lock);
++ goto packet_not_eaten_by_imq_dev;
++ }
++
++packet_not_eaten_by_imq_dev:
++ skb_set_queue_mapping(skb, orig_queue_index);
++ rcu_read_unlock_bh();
++
++ /* cloned? restore original */
++ if (unlikely(skb_orig)) {
++ kfree_skb(skb);
++ entry->skb = skb_orig;
++ }
++ retval = -1;
++out:
++ return retval;
++}
++
++static unsigned int imq_nf_hook(const struct nf_hook_ops *hook_ops,
++ struct sk_buff *pskb,
++ const struct net_device *indev,
++ const struct net_device *outdev,
++ int (*okfn)(struct sk_buff *))
++{
++ return (pskb->imq_flags & IMQ_F_ENQUEUE) ? NF_IMQ_QUEUE : NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++ netif_stop_queue(dev);
++ return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++ netif_start_queue(dev);
++ return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++ .ndo_open = imq_open,
++ .ndo_stop = imq_close,
++ .ndo_start_xmit = imq_dev_xmit,
++ .ndo_get_stats = imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++ dev->netdev_ops = &imq_netdev_ops;
++ dev->type = ARPHRD_VOID;
++ dev->mtu = 16000; /* too small? */
++ dev->tx_queue_len = 11000; /* too big? */
++ dev->flags = IFF_NOARP;
++ dev->features = NETIF_F_SG | NETIF_F_FRAGLIST |
++ NETIF_F_GSO | NETIF_F_HW_CSUM |
++ NETIF_F_HIGHDMA;
++ dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE |
++ IFF_TX_SKB_SHARING);
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++ int ret = 0;
++
++ if (tb[IFLA_ADDRESS]) {
++ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++ ret = -EINVAL;
++ goto end;
++ }
++ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++ ret = -EADDRNOTAVAIL;
++ goto end;
++ }
++ }
++ return 0;
++end:
++ pr_warn("IMQ: imq_validate failed (%d)\n", ret);
++ return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++ .kind = "imq",
++ .priv_size = 0,
++ .setup = imq_setup,
++ .validate = imq_validate,
++};
++
++static const struct nf_queue_handler imq_nfqh = {
++ .outfn = imq_nf_queue,
++};
++
++static int __init imq_init_hooks(void)
++{
++ int ret;
++
++ nf_register_queue_imq_handler(&imq_nfqh);
++
++ ret = nf_register_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ if (ret < 0)
++ nf_unregister_queue_imq_handler();
++
++ return ret;
++}
++
++static int __init imq_init_one(int index)
++{
++ struct net_device *dev;
++ int ret;
++
++ dev = alloc_netdev_mq(0, "imq%d", imq_setup, numqueues);
++ if (!dev)
++ return -ENOMEM;
++
++ ret = dev_alloc_name(dev, dev->name);
++ if (ret < 0)
++ goto fail;
++
++ dev->rtnl_link_ops = &imq_link_ops;
++ ret = register_netdevice(dev);
++ if (ret < 0)
++ goto fail;
++
++ return 0;
++fail:
++ free_netdev(dev);
++ return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++ int err, i;
++
++ if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++ pr_err("IMQ: numdevs has to be betweed 1 and %u\n",
++ IMQ_MAX_DEVS);
++ return -EINVAL;
++ }
++
++ if (numqueues < 1 || numqueues > IMQ_MAX_QUEUES) {
++ pr_err("IMQ: numqueues has to be betweed 1 and %u\n",
++ IMQ_MAX_QUEUES);
++ return -EINVAL;
++ }
++
++ get_random_bytes(&imq_hashrnd, sizeof(imq_hashrnd));
++
++ rtnl_lock();
++ err = __rtnl_link_register(&imq_link_ops);
++
++ for (i = 0; i < numdevs && !err; i++)
++ err = imq_init_one(i);
++
++ if (err) {
++ __rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ }
++ rtnl_unlock();
++
++ return err;
++}
++
++static int __init imq_init_module(void)
++{
++ int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++ err = imq_init_devs();
++ if (err) {
++ pr_err("IMQ: Error trying imq_init_devs(net)\n");
++ return err;
++ }
++
++ err = imq_init_hooks();
++ if (err) {
++ pr_err(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++ return err;
++ }
++
++ pr_info("IMQ driver loaded successfully. (numdevs = %d, numqueues = %d)\n",
++ numdevs, numqueues);
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ pr_info("\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++ pr_info("\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ pr_info("\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++ pr_info("\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++ return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++ nf_unregister_hooks(imq_ops, ARRAY_SIZE(imq_ops));
++ nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++ rtnl_link_unregister(&imq_link_ops);
++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++ imq_unhook();
++ imq_cleanup_devs();
++ pr_info("IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++module_param(numqueues, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will be created)");
++MODULE_PARM_DESC(numqueues, "number of queues per IMQ device");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+diff --git a/include/linux/imq.h b/include/linux/imq.h
+new file mode 100644
+index 0000000..1babb09
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS 5
++
++#define IMQ_F_IFMASK 0x0f
++#define IMQ_F_ENQUEUE 0x10
++
++#define IMQ_MAX_DEVS (IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+diff --git a/include/linux/netfilter/xt_IMQ.h b/include/linux/netfilter/xt_IMQ.h
+new file mode 100644
+index 0000000..9b07230
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+diff --git a/include/linux/netfilter_ipv4/ipt_IMQ.h b/include/linux/netfilter_ipv4/ipt_IMQ.h
+new file mode 100644
+index 0000000..7af320f
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+diff --git a/include/linux/netfilter_ipv6/ip6t_IMQ.h b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+new file mode 100644
+index 0000000..198ac01
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
+index ad8f859..8473090 100644
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -33,6 +33,9 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/netdev_features.h>
+ #include <net/flow_keys.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+
+ /* A. Checksumming of received packets by device.
+ *
+@@ -441,6 +444,9 @@ struct sk_buff {
+ * first. This is owned by whoever has the skb queued ATM.
+ */
+ char cb[48] __aligned(8);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ void *cb_next;
++#endif
+
+ unsigned long _skb_refdst;
+ #ifdef CONFIG_XFRM
+@@ -476,6 +482,9 @@ struct sk_buff {
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ struct nf_conntrack *nfct;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ struct nf_queue_entry *nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ struct nf_bridge_info *nf_bridge;
+ #endif
+@@ -513,6 +522,9 @@ struct sk_buff {
+ */
+ __u8 encapsulation:1;
+ /* 6/8 bit hole (depending on ndisc_nodetype presence) */
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ __u8 imq_flags:IMQ_F_BITS;
++#endif
+ kmemcheck_bitfield_end(flags2);
+
+ #if defined CONFIG_NET_DMA || defined CONFIG_NET_RX_BUSY_POLL
+@@ -653,6 +665,12 @@ void kfree_skb_list(struct sk_buff *segs);
+ void skb_tx_error(struct sk_buff *skb);
+ void consume_skb(struct sk_buff *skb);
+ void __kfree_skb(struct sk_buff *skb);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++int skb_save_cb(struct sk_buff *skb);
++int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern struct kmem_cache *skbuff_head_cache;
+
+ void kfree_skb_partial(struct sk_buff *skb, bool head_stolen);
+@@ -2739,6 +2757,10 @@ static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
+ nf_conntrack_get(src->nfct);
+ dst->nfctinfo = src->nfctinfo;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ dst->imq_flags = src->imq_flags;
++ dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ dst->nf_bridge = src->nf_bridge;
+ nf_bridge_get(src->nf_bridge);
+diff --git a/include/net/netfilter/nf_queue.h b/include/net/netfilter/nf_queue.h
+index 84a53d7..6ffb593 100644
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -33,6 +33,12 @@ struct nf_queue_handler {
+ void nf_register_queue_handler(const struct nf_queue_handler *qh);
+ void nf_unregister_queue_handler(void);
+ void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++void nf_unregister_queue_imq_handler(void);
++#endif
+
+ bool nf_queue_entry_get_refs(struct nf_queue_entry *entry);
+ void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
+diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
+index ef1b1f8..079e5ff 100644
+--- a/include/uapi/linux/netfilter.h
++++ b/include/uapi/linux/netfilter.h
+@@ -13,7 +13,8 @@
+ #define NF_QUEUE 3
+ #define NF_REPEAT 4
+ #define NF_STOP 5
+-#define NF_MAX_VERDICT NF_STOP
++#define NF_IMQ_QUEUE 6
++#define NF_MAX_VERDICT NF_IMQ_QUEUE
+
+ /* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+diff --git a/net/core/dev.c b/net/core/dev.c
+index 3ed11a5..fd62030 100644
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -132,6 +132,9 @@
+ #include <linux/hashtable.h>
+ #include <linux/vmalloc.h>
+ #include <linux/if_macvlan.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+
+ #include "net-sysfs.h"
+
+@@ -2611,7 +2614,12 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
+ }
+ }
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ if (!list_empty(&ptype_all) &&
++ !(skb->imq_flags & IMQ_F_ENQUEUE))
++#else
+ if (!list_empty(&ptype_all))
++#endif
+ dev_queue_xmit_nit(skb, dev);
+
+ skb_len = skb->len;
+diff --git a/net/core/skbuff.c b/net/core/skbuff.c
+index baf6fc4..7d30d78 100644
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -77,6 +77,115 @@
+
+ struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
++
++static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
++ struct pipe_buffer *buf)
++{
++ put_page(buf->page);
++}
++
++static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
++ struct pipe_buffer *buf)
++{
++ get_page(buf->page);
++}
++
++static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
++ struct pipe_buffer *buf)
++{
++ return 1;
++}
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++ char cb[48] __aligned(8);
++ void *cb_next;
++ atomic_t refcnt;
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++ if (!next)
++ return -ENOMEM;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(next->cb, skb->cb, sizeof(skb->cb));
++ next->cb_next = skb->cb_next;
++
++ atomic_set(&next->refcnt, 1);
++
++ skb->cb_next = next;
++ return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++ struct skb_cb_table *next;
++
++ if (!skb->cb_next)
++ return 0;
++
++ next = skb->cb_next;
++
++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++ memcpy(skb->cb, next->cb, sizeof(skb->cb));
++ skb->cb_next = next->cb_next;
++
++ spin_lock(&skb_cb_store_lock);
++
++ if (atomic_dec_and_test(&next->refcnt))
++ kmem_cache_free(skbuff_cb_store_cache, next);
++
++ spin_unlock(&skb_cb_store_lock);
++
++ return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++ struct skb_cb_table *next;
++ struct sk_buff *old;
++
++ if (!__old->cb_next) {
++ new->cb_next = NULL;
++ return;
++ }
++
++ spin_lock(&skb_cb_store_lock);
++
++ old = (struct sk_buff *)__old;
++
++ next = old->cb_next;
++ atomic_inc(&next->refcnt);
++ new->cb_next = next;
++
++ spin_unlock(&skb_cb_store_lock);
++}
++#endif
++
++/* Pipe buffer operations for a socket. */
++static const struct pipe_buf_operations sock_pipe_buf_ops = {
++ .can_merge = 0,
++ .map = generic_pipe_buf_map,
++ .unmap = generic_pipe_buf_unmap,
++ .confirm = generic_pipe_buf_confirm,
++ .release = sock_pipe_buf_release,
++ .steal = sock_pipe_buf_steal,
++ .get = sock_pipe_buf_get,
++};
+
+ /**
+ * skb_panic - private function for out-of-line support
+@@ -563,6 +672,28 @@ static void skb_release_head_state(struct sk_buff *skb)
+ WARN_ON(in_irq());
+ skb->destructor(skb);
+ }
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ /*
++ * This should not happen. When it does, avoid memleak by restoring
++ * the chain of cb-backups.
++ */
++ while (skb->cb_next != NULL) {
++ if (net_ratelimit())
++ pr_warn("IMQ: kfree_skb: skb->cb_next: %08x\n",
++ (unsigned int)skb->cb_next);
++
++ skb_restore_cb(skb);
++ }
++ /*
++ * This should not happen either, nf_queue_entry is nullified in
++ * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++ * leaking entry pointers, maybe memory. We don't know if this is
++ * pointer to already freed memory, or should this be freed.
++ * If this happens we need to add refcounting, etc for nf_queue_entry.
++ */
++ if (skb->nf_queue_entry && net_ratelimit())
++ pr_warn("%s\n", "IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if IS_ENABLED(CONFIG_NF_CONNTRACK)
+ nf_conntrack_put(skb->nfct);
+ #endif
+@@ -694,6 +825,10 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old)
+ new->sp = secpath_get(old->sp);
+ #endif
+ memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ new->cb_next = NULL;
++ /*skb_copy_stored_cb(new, old);*/
++#endif
+ new->csum = old->csum;
+ new->local_df = old->local_df;
+ new->pkt_type = old->pkt_type;
+@@ -3233,6 +3368,13 @@ void __init skb_init(void)
+ 0,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++ sizeof(struct skb_cb_table),
++ 0,
++ SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++ NULL);
++#endif
+ }
+
+ /**
+diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
+index 12f7ef0..deb1c9d 100644
+--- a/net/ipv6/ip6_output.c
++++ b/net/ipv6/ip6_output.c
+@@ -64,9 +64,6 @@ static int ip6_finish_output2(struct sk_buff *skb)
+ struct in6_addr *nexthop;
+ int ret;
+
+- skb->protocol = htons(ETH_P_IPV6);
+- skb->dev = dev;
+-
+ if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
+ struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
+
+@@ -143,6 +140,13 @@ int ip6_output(struct sk_buff *skb)
+ return 0;
+ }
+
++ /*
++ * IMQ-patch: moved setting skb->dev and skb->protocol from
++ * ip6_finish_output2 to fix crashing at netif_skb_features().
++ */
++ skb->protocol = htons(ETH_P_IPV6);
++ skb->dev = dev;
++
+ return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL, dev,
+ ip6_finish_output,
+ !(IP6CB(skb)->flags & IP6SKB_REROUTED));
+diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
+index e9410d1..ba801d5 100644
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -751,6 +751,18 @@ config NETFILTER_XT_TARGET_LOG
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config NETFILTER_XT_TARGET_IMQ
++ tristate '"IMQ" target support'
++ depends on NETFILTER_XTABLES
++ depends on IP_NF_MANGLE || IP6_NF_MANGLE
++ select IMQ
++ default m if NETFILTER_ADVANCED=n
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ tristate '"MARK" target support'
+ depends on NETFILTER_ADVANCED
+diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
+index bffdad7..050e613 100644
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -103,6 +103,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LOG) += xt_LOG.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NETMAP) += xt_NETMAP.o
+diff --git a/net/netfilter/core.c b/net/netfilter/core.c
+index 1fbab0c..4493417 100644
+--- a/net/netfilter/core.c
++++ b/net/netfilter/core.c
+@@ -191,9 +191,11 @@ next_hook:
+ ret = NF_DROP_GETERR(verdict);
+ if (ret == 0)
+ ret = -EPERM;
+- } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
++ } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE ||
++ (verdict & NF_VERDICT_MASK) == NF_IMQ_QUEUE) {
+ int err = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (err < 0) {
+ if (err == -ECANCELED)
+ goto next_hook;
+diff --git a/net/netfilter/nf_internals.h b/net/netfilter/nf_internals.h
+index 61a3c92..5388a0e 100644
+--- a/net/netfilter/nf_internals.h
++++ b/net/netfilter/nf_internals.h
+@@ -23,7 +23,7 @@ unsigned int nf_iterate(struct list_head *head, struct sk_buff *skb,
+ int nf_queue(struct sk_buff *skb, struct nf_hook_ops *elem, u_int8_t pf,
+ unsigned int hook, struct net_device *indev,
+ struct net_device *outdev, int (*okfn)(struct sk_buff *),
+- unsigned int queuenum);
++ unsigned int queuenum, unsigned int queuetype);
+ int __init netfilter_queue_init(void);
+
+ /* nf_log.c */
+diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
+index 5d24b1f..28317dc 100644
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -27,6 +27,23 @@
+ */
+ static const struct nf_queue_handler __rcu *queue_handler __read_mostly;
+
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler __rcu *queue_imq_handler __read_mostly;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++ rcu_assign_pointer(queue_imq_handler, qh);
++}
++EXPORT_SYMBOL_GPL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++ RCU_INIT_POINTER(queue_imq_handler, NULL);
++ synchronize_rcu();
++}
++EXPORT_SYMBOL_GPL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+ * same handler is registered, return 0 in case of success. */
+ void nf_register_queue_handler(const struct nf_queue_handler *qh)
+@@ -105,7 +122,8 @@ int nf_queue(struct sk_buff *skb,
+ struct net_device *indev,
+ struct net_device *outdev,
+ int (*okfn)(struct sk_buff *),
+- unsigned int queuenum)
++ unsigned int queuenum,
++ unsigned int queuetype)
+ {
+ int status = -ENOENT;
+ struct nf_queue_entry *entry = NULL;
+@@ -115,7 +133,17 @@ int nf_queue(struct sk_buff *skb,
+ /* QUEUE == DROP if no one is waiting, to be safe. */
+ rcu_read_lock();
+
+- qh = rcu_dereference(queue_handler);
++ if (queuetype == NF_IMQ_QUEUE) {
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ qh = rcu_dereference(queue_imq_handler);
++#else
++ BUG();
++ goto err_unlock;
++#endif
++ } else {
++ qh = rcu_dereference(queue_handler);
++ }
++
+ if (!qh) {
+ status = -ESRCH;
+ goto err_unlock;
+@@ -205,9 +233,11 @@ void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
+ local_bh_enable();
+ break;
+ case NF_QUEUE:
++ case NF_IMQ_QUEUE:
+ err = nf_queue(skb, elem, entry->pf, entry->hook,
+ entry->indev, entry->outdev, entry->okfn,
+- verdict >> NF_VERDICT_QBITS);
++ verdict >> NF_VERDICT_QBITS,
++ verdict & NF_VERDICT_MASK);
+ if (err < 0) {
+ if (err == -ECANCELED)
+ goto next_hook;
+diff --git a/net/netfilter/xt_IMQ.c b/net/netfilter/xt_IMQ.c
+new file mode 100644
+index 0000000..1c3cd66
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,72 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++ const struct xt_action_param *par)
++{
++ const struct xt_imq_info *mr = par->targinfo;
++
++ pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++ return XT_CONTINUE;
++}
++
++static int imq_checkentry(const struct xt_tgchk_param *par)
++{
++ struct xt_imq_info *mr = par->targinfo;
++
++ if (mr->todev > IMQ_MAX_DEVS - 1) {
++ pr_warn("IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS - 1);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++ {
++ .name = "IMQ",
++ .family = AF_INET,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++ {
++ .name = "IMQ",
++ .family = AF_INET6,
++ .checkentry = imq_checkentry,
++ .target = imq_target,
++ .targetsize = sizeof(struct xt_imq_info),
++ .table = "mangle",
++ .me = THIS_MODULE
++ },
++};
++
++static int __init imq_init(void)
++{
++ return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++ xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch b/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch
new file mode 100644
index 0000000..a6a950b
--- /dev/null
+++ b/src/patches/linux-3.14.22-iwlwifi-noibss_only_on_radar_chan.patch
@@ -0,0 +1,22 @@
+diff -Naur linux-3.14.22.org/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c linux-3.14.22/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+--- linux-3.14.22.org/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c 2014-10-15 08:42:04.000000000 +0200
++++ linux-3.14.22/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c 2014-10-24 17:33:57.165155190 +0200
+@@ -613,14 +613,15 @@
+ /* set no-HT40, will enable as appropriate later */
+ channel->flags = IEEE80211_CHAN_NO_HT40;
+
++ if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR) {
++ channel->flags |= IEEE80211_CHAN_RADAR;
++
+ if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
+ channel->flags |= IEEE80211_CHAN_NO_IR;
+
+ if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
+ channel->flags |= IEEE80211_CHAN_NO_IR;
+-
+- if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
+- channel->flags |= IEEE80211_CHAN_RADAR;
++}
+
+ /* Initialize regulatory-based run-time data */
+ channel->max_power =
hooks/post-receive
--
IPFire 2.x development tree
1
0