IPFire-SCM May 2022

ipfire-scm@lists.ipfire.org

1 participants
37 discussions

[git.ipfire.org] IPFire 2.x development tree branch, core167, updated. c22d834ca84af6155eab7020c6b031e1e8c7e764
by Arne Fitzenreiter 08 May '22

08 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, core167 has been updated via c22d834ca84af6155eab7020c6b031e1e8c7e764 (commit) from 1bd22b04242bfc3a77a151e74d0f1428e0d1f0fe (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- ----------------------------------------------------------------------- Summary of changes: config/rootfiles/core/167/update.sh | 10 ++++++++++ 1 file changed, 10 insertions(+) Difference in files: diff --git a/config/rootfiles/core/167/update.sh b/config/rootfiles/core/167/update.sh index 399978bcc..f447a924b 100644 --- a/config/rootfiles/core/167/update.sh +++ b/config/rootfiles/core/167/update.sh @@ -385,6 +385,16 @@ hardlink -c -vv /lib/firmware # Regenerate all initrds dracut --regenerate-all --force +case "$(uname -m)" in + armv*) + mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire + rm /boot/initramfs-${KVER}-ipfire.img + ;; + aarch64) + mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire + # dont remove initramfs because grub need this to boot. + ;; +esac # Replace /etc/mtab by symlink as mount no longer writes it rm -vf /etc/mtab hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 40811ff383dc358e77afa9c482199336a4ffdca6
by Peter Müller 08 May '22

08 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 40811ff383dc358e77afa9c482199336a4ffdca6 (commit) from 99a79bcbd89de07e108b836fe7d19bd26aeb02c3 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 40811ff383dc358e77afa9c482199336a4ffdca6 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Sun May 8 09:01:24 2022 +0000 Suricata: Install Core Update 167 converter script My fault, again. :-/ Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: lfs/suricata | 3 +++ 1 file changed, 3 insertions(+) Difference in files: diff --git a/lfs/suricata b/lfs/suricata index fa7791cbe..1ebcb4ba4 100644 --- a/lfs/suricata +++ b/lfs/suricata @@ -131,5 +131,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) # Set correct ownership for /var/log/suricata. chown suricata:suricata /var/log/suricata + # Install converter script needed for Core Update 167 + install -m 0755 $(DIR_SRC)/config/suricata/convert-ids-backend-files /usr/sbin/convert-ids-backend-files + @rm -rf $(DIR_APP) @$(POSTBUILD) hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 99a79bcbd89de07e108b836fe7d19bd26aeb02c3
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 99a79bcbd89de07e108b836fe7d19bd26aeb02c3 (commit) via 568215c84bb52ad09d7df43492eb61d99e343ac3 (commit) from 5ecf056d52b007a413db0477254a3600fef1d81c (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 99a79bcbd89de07e108b836fe7d19bd26aeb02c3 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 21:17:47 2022 +0000 Revert "Core Update 168: Ship boost and delete orphaned libraries" This reverts commit 3bd471b8203b878e9e270d833d49e08921c584e3. commit 568215c84bb52ad09d7df43492eb61d99e343ac3 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 21:16:45 2022 +0000 Revert "boost: Fix rootfile entries that referred to python3.8 instead of 3.10" This reverts commit 05a1fe1362b633b82b696a88801bb29fb1070872. For some reason, the rootfile changes introduced with this patch break the build, as they do not seem to be present. Needs further investigation. ----------------------------------------------------------------------- Summary of changes: config/rootfiles/common/aarch64/boost | 8 ++++---- config/rootfiles/common/armv6l/boost | 8 ++++---- config/rootfiles/common/x86_64/boost | 8 ++++---- config/rootfiles/core/168/filelists/aarch64/boost | 1 - config/rootfiles/core/168/filelists/armv6l/boost | 1 - config/rootfiles/core/168/filelists/x86_64/boost | 1 - config/rootfiles/core/168/update.sh | 1 - 7 files changed, 12 insertions(+), 16 deletions(-) delete mode 120000 config/rootfiles/core/168/filelists/aarch64/boost delete mode 120000 config/rootfiles/core/168/filelists/armv6l/boost delete mode 120000 config/rootfiles/core/168/filelists/x86_64/boost Difference in files: diff --git a/config/rootfiles/common/aarch64/boost b/config/rootfiles/common/aarch64/boost index 015dc1458..49ff120ab 100644 --- a/config/rootfiles/common/aarch64/boost +++ b/config/rootfiles/common/aarch64/boost @@ -16250,10 +16250,10 @@ usr/lib/libboost_nowide-a64.so.1.76.0 usr/lib/libboost_prg_exec_monitor-mt-a64.so.1.76.0 #usr/lib/libboost_prg_exec_monitor-a64.so usr/lib/libboost_prg_exec_monitor-a64.so.1.76.0 -#usr/lib/libboost_python310-mt-a64.so -usr/lib/libboost_python310-mt-a64.so.1.76.0 -#usr/lib/libboost_python310-a64.so -usr/lib/libboost_python310-a64.so.1.76.0 +#usr/lib/libboost_python38-mt-a64.so +usr/lib/libboost_python38-mt-a64.so.1.76.0 +#usr/lib/libboost_python38-a64.so +usr/lib/libboost_python38-a64.so.1.76.0 #usr/lib/libboost_random-mt-a64.so usr/lib/libboost_random-mt-a64.so.1.76.0 #usr/lib/libboost_random-a64.so diff --git a/config/rootfiles/common/armv6l/boost b/config/rootfiles/common/armv6l/boost index 79e9ed3d7..80cc4063a 100644 --- a/config/rootfiles/common/armv6l/boost +++ b/config/rootfiles/common/armv6l/boost @@ -16250,10 +16250,10 @@ usr/lib/libboost_nowide-mt-a32.so.1.76.0 usr/lib/libboost_prg_exec_monitor-a32.so.1.76.0 #usr/lib/libboost_prg_exec_monitor-mt-a32.so usr/lib/libboost_prg_exec_monitor-mt-a32.so.1.76.0 -#usr/lib/libboost_python310-a32.so -usr/lib/libboost_python310-a32.so.1.76.0 -#usr/lib/libboost_python310-mt-a32.so -usr/lib/libboost_python310-mt-a32.so.1.76.0 +#usr/lib/libboost_python38-a32.so +usr/lib/libboost_python38-a32.so.1.76.0 +#usr/lib/libboost_python38-mt-a32.so +usr/lib/libboost_python38-mt-a32.so.1.76.0 #usr/lib/libboost_random-a32.so usr/lib/libboost_random-a32.so.1.76.0 #usr/lib/libboost_random-mt-a32.so diff --git a/config/rootfiles/common/x86_64/boost b/config/rootfiles/common/x86_64/boost index 77eef1d0b..357dc2d1d 100644 --- a/config/rootfiles/common/x86_64/boost +++ b/config/rootfiles/common/x86_64/boost @@ -16250,10 +16250,10 @@ usr/lib/libboost_nowide-x64.so.1.76.0 usr/lib/libboost_prg_exec_monitor-mt-x64.so.1.76.0 #usr/lib/libboost_prg_exec_monitor-x64.so usr/lib/libboost_prg_exec_monitor-x64.so.1.76.0 -#usr/lib/libboost_python310-mt-x64.so -usr/lib/libboost_python310-mt-x64.so.1.76.0 -#usr/lib/libboost_python310-x64.so -usr/lib/libboost_python310-x64.so.1.76.0 +#usr/lib/libboost_python38-mt-x64.so +usr/lib/libboost_python38-mt-x64.so.1.76.0 +#usr/lib/libboost_python38-x64.so +usr/lib/libboost_python38-x64.so.1.76.0 #usr/lib/libboost_random-mt-x64.so usr/lib/libboost_random-mt-x64.so.1.76.0 #usr/lib/libboost_random-x64.so diff --git a/config/rootfiles/core/168/filelists/aarch64/boost b/config/rootfiles/core/168/filelists/aarch64/boost deleted file mode 120000 index 807ad06be..000000000 --- a/config/rootfiles/core/168/filelists/aarch64/boost +++ /dev/null @@ -1 +0,0 @@ -../../../../common/aarch64/boost \ No newline at end of file diff --git a/config/rootfiles/core/168/filelists/armv6l/boost b/config/rootfiles/core/168/filelists/armv6l/boost deleted file mode 120000 index 42aa7cd23..000000000 --- a/config/rootfiles/core/168/filelists/armv6l/boost +++ /dev/null @@ -1 +0,0 @@ -../../../../common/armv6l/boost \ No newline at end of file diff --git a/config/rootfiles/core/168/filelists/x86_64/boost b/config/rootfiles/core/168/filelists/x86_64/boost deleted file mode 120000 index 9ed31e1d5..000000000 --- a/config/rootfiles/core/168/filelists/x86_64/boost +++ /dev/null @@ -1 +0,0 @@ -../../../../common/x86_64/boost \ No newline at end of file diff --git a/config/rootfiles/core/168/update.sh b/config/rootfiles/core/168/update.sh index daebf249e..f62c3810a 100644 --- a/config/rootfiles/core/168/update.sh +++ b/config/rootfiles/core/168/update.sh @@ -42,7 +42,6 @@ rm -rvf \ /usr/bin/dnet-config \ /usr/bin/sdparm \ /usr/lib/libart_lgpl_2.so* \ - /usr/lib/libboost_python38* \ /usr/lib/libdnet.la \ /usr/lib/libdnet.so* \ /usr/lib/libevent-1.4.so* \ hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 5ecf056d52b007a413db0477254a3600fef1d81c
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 5ecf056d52b007a413db0477254a3600fef1d81c (commit) from b2f707cb025bccf4417b0848e1140fc610e76fd6 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 5ecf056d52b007a413db0477254a3600fef1d81c Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 16:47:44 2022 +0000 Drop libusb-compat This was solely needed for NUT, which has now been updated, and does not require an older libusb version to be carried around. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/rootfiles/common/libusb-compat | 7 ---- config/rootfiles/core/168/update.sh | 2 + lfs/libusb-compat | 78 ----------------------------------- make.sh | 1 - 4 files changed, 2 insertions(+), 86 deletions(-) delete mode 100644 config/rootfiles/common/libusb-compat delete mode 100644 lfs/libusb-compat Difference in files: diff --git a/config/rootfiles/common/libusb-compat b/config/rootfiles/common/libusb-compat deleted file mode 100644 index ca3007e9b..000000000 --- a/config/rootfiles/common/libusb-compat +++ /dev/null @@ -1,7 +0,0 @@ -#usr/bin/libusb-config -#usr/include/usb.h -usr/lib/libusb-0.1.so.4 -usr/lib/libusb-0.1.so.4.4.4 -#usr/lib/libusb.la -usr/lib/libusb.so -#usr/lib/pkgconfig/libusb.pc diff --git a/config/rootfiles/core/168/update.sh b/config/rootfiles/core/168/update.sh index 4b525170b..daebf249e 100644 --- a/config/rootfiles/core/168/update.sh +++ b/config/rootfiles/core/168/update.sh @@ -53,6 +53,8 @@ rm -rvf \ /usr/lib/libpri.so* \ /usr/lib/libsolv.so* \ /usr/lib/libsolvext.so* \ + /usr/lib/libusb.so \ + /usr/lib/libusb-0.1.so* \ /usr/sbin/dnet # Remove netbpm add-on, if installed diff --git a/lfs/libusb-compat b/lfs/libusb-compat deleted file mode 100644 index f82d36c5a..000000000 --- a/lfs/libusb-compat +++ /dev/null @@ -1,78 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see <http://www.gnu.org/licenses/>. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 0.1.5 - -THISAPP = libusb-compat-$(VER) -DL_FILE = $(THISAPP).tar.bz2 -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_BLAKE2 = 66fa89c507d0454a587fa84d2ee2c34428963fa1770b44038fa45063466611ae263a3c790a167e5049393ef4d87073d1b16135d63cd0666256c3430bf36dae49 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -b2 : $(subst %,%_BLAKE2,$(objects)) - -############################################################################### -# Downloading, checking, b2sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_BLAKE2,$(objects)) : - @$(B2SUM) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE) - $(UPDATE_AUTOMAKE) - cd $(DIR_APP) && ./configure --prefix=/usr --disable-static - cd $(DIR_APP) && make -j $(PARALLELISM) - cd $(DIR_APP) && make install - @rm -rf $(DIR_APP) - @$(POSTBUILD) diff --git a/make.sh b/make.sh index d96d4db2a..09b307e36 100755 --- a/make.sh +++ b/make.sh @@ -1156,7 +1156,6 @@ buildipfire() { lfsmake2 popt lfsmake2 libedit lfsmake2 libusb - lfsmake2 libusb-compat lfsmake2 libpcap lfsmake2 ppp lfsmake2 pptp hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. b2f707cb025bccf4417b0848e1140fc610e76fd6
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via b2f707cb025bccf4417b0848e1140fc610e76fd6 (commit) from b6fe8ee88dafb5ebb02a787b11da602de016969d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit b2f707cb025bccf4417b0848e1140fc610e76fd6 Author: Adolf Belka <adolf.belka(a)ipfire.org> Date: Thu May 5 18:39:53 2022 +0200 nut: Update to version 2.8.0 - Update from version 2.7.4 to 2.8.0 - 2.7.4 was released in 2016 and since then not a lot of progress was made with it but since the start of 2022 new work on nut has ocurred culminating in this release - Update of rootfile - Ran find-dependencies on the old libraries due to the sobump to confirm that nothing else than nut used them, which was the case. - Changelog After a long and windy trip since the last official release v2.7.4 half a dozen years ago, we the community, contributors and maintainers are proud to announce at last the general availability of NUT v2.8.0! As always, the new release includes numerous new drivers, sub-drivers, protocols and bug-fixes, with many companies and individuals chipping in with contributions of code.Thanks to everyone involved in making this happen, inspiring the changes, and providing the open-source friendly infrastructure. This release also culminates a significant effort in improvements of NUT QA and CI, and as a result -- in codebase quality and portability across a decade or two of recent platforms, third-party tools and other dependencies. As a side effect, public API (in headers and libraries) has changed a bit, hence a new semantic "minor" number is claimed for this major body of work. During this time, the https://networkupstools.org/ web site has changed to a rolling-release model to serve current information to match the evolving codebase. There are now special Sub-sites for historic releases to keep documentation snapshots relevant for users of packages which are typically based on official NUT releases. We recognize that NUT is an important piece of infrastructure which gets built into all sorts of devices, projects and operating systems -- some of which the team never heard of until they pop up in a question, and others we haven't heard of for years -- so we take a seriously omnivorous stance towards covering many versions and implementations of compiler suites, C/C++ revisions, make programs, shell and other scripted language interpreters, OSes and CPUs, and other similar variables tamed with our new NUT CI farm test matrix dynamically driven by currently registered build agents and their declared capabilities. Sections in the NEWS and UPGRADING files about changes since last release are several pages long, so would not all be repeated here. A few important highlights for distribution packagers and custom builders follow, however: NUT now supports more i2c and modbus devices, as well as libusb-1.0 support as an alternative to earlier libusb-0.1 (so new dependency-based categories of packages for drivers may be due); NUT Python modules and scripts (e.g. NUT-Monitor variants) should work with python-2.7 and with python-3.x, so covering historic distro releases as well as new ones (and so your distro can deliver one or both, probably in several packages with different dependencies in the latter case); NUT provides revised reference systemd and SMF service unit definitions, including support of drivers wrapped into individual service instances with varying dependencies based on different media required (networked stack, USB stack, etc.), and many daemons include -F option for running "in foreground" to avoid extra forking after one already done by a service framework - you may want to use those in your packaged deliverables; NUT newly provides the "nut-driver-enumerator" script and service, which allows it to follow edition of ups.conf and dynamically define+(re)start and stop+undefine service instances for drivers - there are several ways it can be integrated for different use-cases; There are several new configuration keywords and CLI options - so while new NUT builds should work with old configs and scripts, the opposite is not necessarily true (old binaries may reject configurations taking advantage of new features); There are several new protocol keywords - but old and new NUT daemons (data server and clients) should be able to communicate both ways; It is assumed that API/ABI changes may require third-party NUT clients (library consumers of libnutclient, libupsclient, libnutscan... -- their version info was bumped accordingly) to get rebuilt, in order to work with the new NUT release in a stable fashion; The dummy-ups driver used in automated testing now processes *.dev filename patterns once and does not loop, like it still does for *.seq and other files (by default); USB code is now more strict about logical minimum/maximum ranges for data reported from devices, and some devices were already found to make mistakes - so there is also a mechanism for turning a blind eye to known issues and fix-up such report descriptors to produce intended sane values; New documentation page docs/config-prereqs.txt highlights packaged dependencies installable on a large range of platforms to build as much of NUT as possible (incidentally, ones NUT CI farm uses to test every iteration); Finally, we hope that NUT codebase might be able to cater for everyone "out of the box" (it also simplifies local builds from GitHub sources on any systems, for troubleshooting and checking pre-release enhancements): if you as a packager have to apply patches for your distribution, give it a thought -- whether they address a common issue best solved upstream once and behave similarly for everyone (and conversely, if your platform can do with existing solutions already tracked in the NUT version du-jour). PRs welcome! Or at least Wiki entries to list all the distro efforts for cross-pollination Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/rootfiles/packages/nut | 36 ++++++++++++++++++++++-------------- lfs/nut | 18 ++++++++++++------ 2 files changed, 34 insertions(+), 20 deletions(-) Difference in files: diff --git a/config/rootfiles/packages/nut b/config/rootfiles/packages/nut index b01381d74..3bf9d03a9 100644 --- a/config/rootfiles/packages/nut +++ b/config/rootfiles/packages/nut @@ -5,6 +5,7 @@ etc/nut/upsd.conf.sample etc/nut/upsd.users.sample etc/nut/upsmon.conf.sample etc/nut/upssched.conf.sample +etc/rc.d/init.d/nut etc/udev/rules.d/62-nut-usbups.rules usr/bin/al175 usr/bin/apcsmart @@ -36,10 +37,11 @@ usr/bin/metasys usr/bin/mge-shut usr/bin/mge-utalk usr/bin/microdowell +usr/bin/microsol-apc usr/bin/nut-scanner usr/bin/nutdrv_atcl_usb usr/bin/nutdrv_qx -usr/bin/oldmge-shut +usr/bin/nutdrv_siemens-sitop usr/bin/oneac usr/bin/optiups usr/bin/powercom @@ -63,21 +65,22 @@ usr/bin/upsrw usr/bin/upssched-cmd usr/bin/usbhid-ups usr/bin/victronups -#usr/lib/libnutclient.a #usr/lib/libnutclient.la -usr/lib/libnutclient.so -usr/lib/libnutclient.so.0 -usr/lib/libnutclient.so.0.0.0 -#usr/lib/libnutscan.a +#usr/lib/libnutclient.so +usr/lib/libnutclient.so.2 +usr/lib/libnutclient.so.2.0.0 +#usr/lib/libnutclientstub.la +#usr/lib/libnutclientstub.so +usr/lib/libnutclientstub.so.1 +usr/lib/libnutclientstub.so.1.0.0 #usr/lib/libnutscan.la -usr/lib/libnutscan.so -usr/lib/libnutscan.so.1 -usr/lib/libnutscan.so.1.0.0 -#usr/lib/libupsclient.a +#usr/lib/libnutscan.so +usr/lib/libnutscan.so.2 +usr/lib/libnutscan.so.2.0.0 #usr/lib/libupsclient.la -usr/lib/libupsclient.so -usr/lib/libupsclient.so.4 -usr/lib/libupsclient.so.4.0.0 +#usr/lib/libupsclient.so +usr/lib/libupsclient.so.6 +usr/lib/libupsclient.so.6.0.0 usr/sbin/upsd usr/sbin/upsdrvctl usr/sbin/upsmon @@ -119,10 +122,13 @@ usr/share/driver.list #usr/share/man/man8/mge-shut.8 #usr/share/man/man8/mge-utalk.8 #usr/share/man/man8/microdowell.8 +#usr/share/man/man8/microsol-apc.8 +#usr/share/man/man8/nut-driver-enumerator.8 #usr/share/man/man8/nut-recorder.8 #usr/share/man/man8/nut-scanner.8 #usr/share/man/man8/nutdrv_atcl_usb.8 #usr/share/man/man8/nutdrv_qx.8 +#usr/share/man/man8/nutdrv_siemens_sitop.8 #usr/share/man/man8/nutupsdrv.8 #usr/share/man/man8/oneac.8 #usr/share/man/man8/optiups.8 @@ -143,12 +149,14 @@ usr/share/driver.list #usr/share/man/man8/upscode2.8 #usr/share/man/man8/upsd.8 #usr/share/man/man8/upsdrvctl.8 +#usr/share/man/man8/upsdrvsvcctl.8 #usr/share/man/man8/upslog.8 #usr/share/man/man8/upsmon.8 #usr/share/man/man8/upsrw.8 #usr/share/man/man8/upssched.8 #usr/share/man/man8/usbhid-ups.8 #usr/share/man/man8/victronups.8 +#usr/share/solaris-init +#usr/share/solaris-init/nut var/ipfire/backup/addons/includes/nut var/state/ups -etc/rc.d/init.d/nut diff --git a/lfs/nut b/lfs/nut index cd0af7ec5..619918b5b 100644 --- a/lfs/nut +++ b/lfs/nut @@ -26,7 +26,7 @@ include Config SUMMARY = Network UPS Tools Core (Uninterruptible Power Supply Monitoring) -VER = 2.7.4 +VER = 2.8.0 THISAPP = nut-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = nut -PAK_VER = 7 +PAK_VER = 8 DEPS = @@ -50,7 +50,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 367c687efd739150898a14c700d5fddbe22bf926522923e1842011ec49b67d6638620500c4eda50291feb474cc6eef39fff63764cb3e0fad5898abee981f8308 +$(DL_FILE)_BLAKE2 = 6ad87e9c90920d45846d9c1311e8feeb3c36bfa506d62d938940c00d2fc7f7b30632d079a8ee969db624824ae4fd3e14e41e8acd1eda296e26a3aa340f186b94 install : $(TARGET) @@ -84,9 +84,15 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) $(UPDATE_AUTOMAKE) - cd $(DIR_APP) && ./configure --prefix=/usr --sysconfdir=/etc/nut \ - --with-usb --with-user=root --with-group=nut \ - --with-wrap=no --with-udev-dir=/etc/udev + cd $(DIR_APP) && ./configure \ + --prefix=/usr \ + --sysconfdir=/etc/nut \ + --with-usb \ + --with-user=root \ + --with-group=nut \ + --with-wrap=no \ + --with-udev-dir=/etc/udev \ + --disable-static cd $(DIR_APP) && make #$(MAKETUNING) cd $(DIR_APP) && make install # sed -i -e "s|ATTR{|SYSFS{|g" /etc/udev/rules.d/52-nut-usbups.rules hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. b6fe8ee88dafb5ebb02a787b11da602de016969d
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via b6fe8ee88dafb5ebb02a787b11da602de016969d (commit) from 5b1299f71717a59f50ea5b7aa7796dfe27afd080 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit b6fe8ee88dafb5ebb02a787b11da602de016969d Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 16:24:20 2022 +0000 Run ./make.sh update-contributors Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: html/cgi-bin/credits.cgi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Difference in files: diff --git a/html/cgi-bin/credits.cgi b/html/cgi-bin/credits.cgi index da97408bd..26cbc4f6d 100644 --- a/html/cgi-bin/credits.cgi +++ b/html/cgi-bin/credits.cgi @@ -63,11 +63,11 @@ print <<END Michael Tremer, Arne Fitzenreiter, Stefan Schantl, -Matthias Fischer, Peter Müller, +Matthias Fischer, Christian Schmidt, -Alexander Marx, Adolf Belka, +Alexander Marx, Erik Kapfer, Jan Paul Tücking, Jonatan Schlag, @@ -101,14 +101,15 @@ Michael Eitelwein, Robin Roevens, Alex Koch, Dominik Hassler, +Jon Murphy, Larsen, Ramax Lo, Gabriel Rolland, -Jon Murphy, Marcel Follert, Tim FitzGeorge, Anton D. Seliverstov, Bernhard Bittner, +Daniel Weismueller, David Kleuker, Hans Horsten, Jakub Ratajczak, @@ -121,7 +122,6 @@ Axel Gembe, Bernhard Held, Christoph Anderegg, Daniel Aleksandersen, -Daniel Weismueller, Douglas Duckworth, Eberhard Beilharz, Ersan Yildirim Ersan, hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 5b1299f71717a59f50ea5b7aa7796dfe27afd080
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 5b1299f71717a59f50ea5b7aa7796dfe27afd080 (commit) from 68725035744de0253f19e0b3550799799a44f80d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 5b1299f71717a59f50ea5b7aa7796dfe27afd080 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 16:22:51 2022 +0000 oinkmaster: Delete remnants Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/cfgroot/oinkmaster.conf | 292 --------------------- .../oinkmaster-2.0-add_community_rules.patch | 14 - src/patches/oinkmaster-tmp.patch | 12 - 3 files changed, 318 deletions(-) delete mode 100644 config/cfgroot/oinkmaster.conf delete mode 100644 src/patches/oinkmaster-2.0-add_community_rules.patch delete mode 100644 src/patches/oinkmaster-tmp.patch Difference in files: diff --git a/config/cfgroot/oinkmaster.conf b/config/cfgroot/oinkmaster.conf deleted file mode 100644 index e52d89dc9..000000000 --- a/config/cfgroot/oinkmaster.conf +++ /dev/null @@ -1,292 +0,0 @@ -# $Id: oinkmaster.conf,v 1.1.2.2 2005/05/02 17:11:58 franck78 Exp $ # - -# Oinkmaster is a tool to update snort rules, which allow to conserve -# a particular setting even after a rules update. -# This file is a customised version for IPCop. -# Disabling/enabling a particular rule should be made in this file. -# In case you want to use some of the rules files commented out in -# standard ipcop /etc/snort/snort.conf : -# -comment out the corresponding skipfile in this oinkmaster.conf -# -uncomment the corresponding include in /etc/snort.conf -# -save snort settings to restart snort - - -################################################ -# General options you may want to change # -################################################ - - - -# The PATH to use during execution. If you prefer to use external -# binaries (i.e. use_external_bins=1, see below), tar and gzip must be -# found, and also wget if downloading via ftp, http or https. All with -# optional .exe suffix. If you're on Cygwin, make sure that the path -# contains the Cygwin binaries and not the native Win32 binaries or -# you will get problems. -# Assume UNIX style by default: -#path = /bin:/usr/bin:/usr/local/bin -path = /bin - -# Files in the archive(s) matching this regular expression will be -# checked for changes, and then updated or added if needed. -# All other files will be ignored. You can then choose to skip -# individual files by specifying the "skipfile" keyword below. -# Normally you shouldn't need to change this one. -update_files = \.rules$|\.config$|\.conf$|\.txt$|\.map$ - - -# Regexp of keywords that starts a snort rule. -# May be useful if you create your own ruletypes and want those -# lines to be regarded as rules as well. -# rule_actions = alert|drop|log|pass|reject|sdrop|activate|dynamic - - -####################################################################### -# Files to totally skip (i.e. never update or check for changes) # -# # -# Syntax: skipfile filename # -# or: skipfile filename1, filename2, filename3, ... # -####################################################################### - -# Ignore local.rules from the rules archive by default since we might -# have put some local rules in our own local.rules and we don't want it -# to get overwritten by the empty one from the archive after each -# update. -skipfile local.rules - -# The file deleted.rules contains rules that have been deleted from -# other files, so there is usually no point in updating it. -skipfile deleted.rules - -# Also skip snort.conf by default since we don't want to overwrite our -# own snort.conf if we have it in the same directory as the rules. If -# you have your own production copy of snort.conf in another directory, -# it may be really nice to check for changes in this file though, -# especially since variables are sometimes added or modified and -# new/old files are included/excluded. -skipfile snort.conf - -# You may want to consider ignoring threshold.conf for the same reasons -# as for snort.conf, i.e. if you customize it locally and don't want it -# to become overwritten by the default one. It may be better to put -# local thresholding/suppressing in some local file and still update -# and use the official one though, in case important stuff is added to -# it some day. We do update it by default, but it's your call. -# skipfile threshold.conf - -# If you update from multiple URLs at the same time you must ignore -# the sid-msg.map (and generate it yourself if you need one) as it's -# usually included in each rules tarball. See the FAQ for more info. -# skipfile sid-msg.map -skipfile web-attacks.rules -skipfile backdoor.rules -skipfile shellcode.rules -skipfile policy.rules -skipfile porn.rules -skipfile info.rules -skipfile icmp-info.rules -skipfile virus.rules -skipfile chat.rules -skipfile multimedia.rules -skipfile p2p.rules -skipfile experimental.rules - - -########################################################################## -# SIDs to modify after each update (only for the skilled/stupid/brave). # -# Don't use it unless you have to. There is nothing that stops you from # -# modifying rules in such ways that they become invalid or generally # -# break things. You have been warned. # -# If you just want to disable SIDs, please skip this section and have a # -# look at the "disablesid" keyword below. # -# # -# You may specify multiple modifysid directives for the same SID (they # -# will be processed in order of appearance), and you may also specify a # -# list of SIDs on which the substitution should be applied. # -# If the argument is in the form something.something it is regarded # -# as a filename and the substitution will apply on all rules in that # -# file. The wildcard ("*") can be used to apply the substitution on all # -# rules regardless of the SID or file. Please avoid using #comments # -# at the end of modifysid lines, they may confuse the parser in some # -# situations. # -# # -# Syntax: # -# modifysid SID "replacethis" | "withthis" # -# or: # -# modifysid SID1, SID2, SID3, ... "replacethis" | "withthis" # -# or: # -# modifysid file "replacethis" | "withthis" # -# or: # -# modifysid * "replacethis" | "withthis" # -# # -# The strings within the quotes will simply be passed to a # -# s/replacethis/withthis/ statement in Perl, so they must be valid # -# regular expressions. The strings are case-sensitive and only the first # -# occurrence will be replaced. If there are multiple occurrences you # -# want to replace, simply repeat the same modifysid line. # -# # -# If you specify a modifysid statement for a multi-line rule, Oinkmaster # -# will first translate the rule into a single-line version and then # -# perform the substitution, so you don't have to care about the trailing # -# backslashes and newlines. # -# # -# If you use variables in the substitution expression, it is strongly # -# recommended to always specify them like ${varname} instead of # -# $varname (like ${1} instead of $1 for example) to avoid parsing # -# confusion in some situations. Note that modifysid statements # -# will process both active and inactive (disabled) rules. # -# # -# You may want to check out README.templates and template-examples.conf # -# to find how you can simplify the modifysid usage by using templates. # -########################################################################## - -# Example to enable a rule (in this case SID 1325) that is disabled by -# default, by simply replacing leading "#alert" with "alert". -# (You should really use 'enablesid' for this though.) -# Oinkmaster removes whitespaces next to the leading "#" so you don't -# have to worry about that, but be careful about possible whitespace in -# other places when writing the regexps. -# modifysid 1325 "^#alert" | "alert" - -# You could also do this to enable it no matter what type of rule it is -# (alert, log, pass, etc). -# modifysid 1325 "^#" | "" - -# Example to add "tag" stuff to SID 1325. -# modifysid 1325 "sid:1325;" | "sid:1325; tag: host, src, 300, seconds;" - -# Example to make SID 1378 a 'drop' rule (valid if you're running -# Snort_inline). -# modifysid 1378 "^alert" | "drop" - -# Example to replace first occurrence of $EXTERNAL_NET with $HOME_NET -# in SID 302. Remember that the strings are regular expressions, so you -# must escape special characters like $. -# modifysid 302 "\$EXTERNAL_NET" | "\$HOME_NET" - -# You can also specify that a substitution should apply on multiple SIDs. -# modifysid 302,429,1821 "\$EXTERNAL_NET" | "\$HOME_NET" - -# You can take advantage of the fact that it's regular expressions and -# do more complex stuff. This example (for Snort_inline) adds a 'replace' -# statement to SID 1324 that replaces "/bin/sh" with "/foo/sh". -# modifysid 1324 "(content\s*:\s*"\/bin\/sh"\s*;)" | \ -# "${1} replace:"\/foo\/sh";" - -# If you for some reason would like to add a comment inside the actual -# rules file, like the reason why you disabled this rule, you can do -# like this (you would normally add such comments in oinkmaster.conf -# though). -# modifysid 1324 "(.+)" | "# 20020101: disabled this rule just for fun:\n#${1}" - -# Here is an example that is actually useful. Let's say you don't care -# about incoming welchia pings (detected by SID 483 at the time of -# writing) but you want to know when infected hosts on your network -# scans hosts on the outside. (Remember that watching for outgoing -# malicious packets is often just as important as watching for incoming -# ones, especially in this case.) The rule currently looks like -# "alert icmp $EXTERNAL_NET any -> $HOME_NET any ..." -# but we want to switch that so it becomes -# "alert icmp $HOME_NET any -> $EXTERNAL_NET any ...". -# Here is how it could be done. -# modifysid 483 \ -# "(.+) \$EXTERNAL_NET (.+) \$HOME_NET (.+)" | \ -# "${1} \$HOME_NET ${2} \$EXTERNAL_NET ${3}" - -# The wildcard (modifysid * ...) can be used to do all kinds of -# interesting things. The substitution expression will be applied on all -# matching rules. First, a silly example to replace "foo" with "bar" in -# all rules (that have the string "foo" in them, that is.) -# modifysid * "foo" | "bar" - -# If you for some reason don't want to use the stream preprocessor to -# match established streams, you may want to replace the 'flow' -# statement with 'flags:A+;' in all those rules. -# modifysid * "flow:[a-z,_ ]+;" | "flags:A+;" - -# Example to convert all rules of classtype attempted-admin to 'drop' -# rules (for Snort_inline only, obviously). -# modifysid * "^alert (.*classtype\s*:\s*attempted-admin)" | "drop ${1}" - -# This one will append some text to the 'msg' string for all rules that -# have the 'tag' keyword in them. -# modifysid * "(.*msg:\s*".+?)"(\s*;.+;\s*tag:.*)" | \ -# "${1}, going to tag this baby"${2}" - -# There may be times when you want to replace multiple occurrences of a -# certain keyword/string in a rule and not just the first one. To -# replace the first two occurrences of "foo" with "bar" in SID 100, -# simply repeat the modifysid statement: -# modifysid 100 "foo" | "bar" -# modifysid 100 "foo" | "bar" - -# Or you can even specify a SID list but repeat the same SID as many -# times as required, like: -# modifysid 100,100,100 "foo" | "bar" - -# Enable all rules in the file exploit.rules. -# modifysid exploit.rules "^#" | "" - -# Enable all rules in exploit.rules, icmp-info.rules and also SID 1171. -# modifysid exploit.rules, snmp.rules, 1171 "^#" | "" - - - -######################################################################## -# SIDs that we don't want to update. # -# If you for some reason don't want a specific rule to be updated # -# (e.g. you made local modifications to it and you never want to # -# update it and don't care about changes in the official version), you # -# can specify a "localsid" statement for it. This means that the old # -# version of the rule (i.e. the one in the rules file on your # -# harddrive) is always kept, regardless if the official version has # -# been updated. Please do not use this feature unless in special # -# cases as it's easy to end up with many signatures that aren't # -# maintained anymore. See the FAQ for details about this and hints # -# about better solutions regarding customization of rules. # -# # -# Syntax: localsid SID # -# or: localsid SID1, SID2, SID3, ... # -######################################################################## - -# Example to never update SID 1325. -# localsid 1325 - - - -######################################################################## -# SIDs to enable after each update. # -# Will simply remove all the leading '#' for a specified SID (if it's # -# a multi-line rule, the leading '#' for all lines are removed.) # -# These will be processed after all the modifysid and disablesid # -# statements. Using 'enablesid' on a rule that is not disabled is a # -# NOOP. # -# # -# Syntax: enablesid SID # -# or: enablesid SID1, SID2, SID3, ... # -######################################################################## - -# Example to enable SID 1325. -# enablesid 1325 - - - -######################################################################## -# SIDs to comment out, i.e. disable, after each update by placing a # -# '#' in front of the rule (if it's a multi-line rule, it will be put # -# in front of all lines). # -# # -# Syntax: disablesid SID # -# or: disablesid SID1, SID2, SID3, ... # -######################################################################## - -# You can specify one SID per line. -# disablesid 1 -# disablesid 2 -# disablesid 3 - -# And also as comma-separated lists. -# disablesid 4,5,6 - -# It's a good idea to also add comment about why you disable the sid: -# disablesid 1324 # 20020101: disabled this SID just because I can diff --git a/src/patches/oinkmaster-2.0-add_community_rules.patch b/src/patches/oinkmaster-2.0-add_community_rules.patch deleted file mode 100644 index 720efd67c..000000000 --- a/src/patches/oinkmaster-2.0-add_community_rules.patch +++ /dev/null @@ -1,14 +0,0 @@ -diff -Naur oinkmaster-2.0.org/oinkmaster.pl oinkmaster-2.0/oinkmaster.pl ---- oinkmaster-2.0.org/oinkmaster.pl 2007-04-20 05:20:32.000000000 +0200 -+++ oinkmaster-2.0/oinkmaster.pl 2013-07-15 16:46:40.000000000 +0200 -@@ -1159,6 +1159,10 @@ - } - } - -+ # hack for community-ruleset. -+ if (-d "$dir/community-rules") { -+ move("$dir/community-rules","$dir/$rules_dir"); -+ } - # Make sure that non-empty rules directory existed in archive. - # We permit empty rules directory if min_files is set to 0 though. - clean_exit("$url: no \"$rules_dir\" directory found in tar file.") diff --git a/src/patches/oinkmaster-tmp.patch b/src/patches/oinkmaster-tmp.patch deleted file mode 100644 index 8b2a1b89a..000000000 --- a/src/patches/oinkmaster-tmp.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -Naur org/oinkmaster.conf new/oinkmaster.conf ---- org/oinkmaster.conf 2008-10-25 18:53:30.000000000 +0200 -+++ new/oinkmaster.conf 2009-12-07 20:21:15.000000000 +0100 -@@ -117,7 +117,7 @@ - # TMPDIR or TEMPDIR, or otherwise use "/tmp" if none of them was set. - - # Example for UNIX. --# tmpdir = /home/oinkmaster/tmp/ -+tmpdir = /var/tmp/ - - # Example if running native Win32 or Cygwin. - # tmpdir = c:\tmp hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 68725035744de0253f19e0b3550799799a44f80d
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 68725035744de0253f19e0b3550799799a44f80d (commit) from 4d4f5df0c8b4e212cec1fd1206616308584df18e (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 68725035744de0253f19e0b3550799799a44f80d Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 16:21:23 2022 +0000 Core Update 168: Ship and apply IDSv4 changes Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/rootfiles/{oldcore/158 => core/168}/filelists/backup | 0 config/rootfiles/core/168/filelists/files | 5 +++++ config/rootfiles/core/168/update.sh | 10 ++++++++++ 3 files changed, 15 insertions(+) copy config/rootfiles/{oldcore/158 => core/168}/filelists/backup (100%) Difference in files: diff --git a/config/rootfiles/core/168/filelists/backup b/config/rootfiles/core/168/filelists/backup new file mode 120000 index 000000000..38e28a8b4 --- /dev/null +++ b/config/rootfiles/core/168/filelists/backup @@ -0,0 +1 @@ +../../../common/backup \ No newline at end of file diff --git a/config/rootfiles/core/168/filelists/files b/config/rootfiles/core/168/filelists/files index e0883a7db..c0030ebb5 100644 --- a/config/rootfiles/core/168/filelists/files +++ b/config/rootfiles/core/168/filelists/files @@ -391,10 +391,15 @@ lib/firmware/rtw88/rtw8821c_fw.bin lib/firmware/rtw88/rtw8822c_fw.bin lib/firmware/rtw89/rtw8852a_fw.bin lib/firmware/wfx/wfm_wf200_C0.sec +usr/bin/fcrontab usr/lib/firewall/rules.pl +usr/local/bin/update-ids-ruleset +usr/sbin/convert-ids-backend-files +srv/web/ipfire/cgi-bin/ids.cgi srv/web/ipfire/cgi-bin/media.cgi srv/web/ipfire/cgi-bin/wakeonlan.cgi srv/web/ipfire/html/themes/ipfire/include/functions.pl var/ipfire/header.pl +var/ipfire/ids-functions.pl var/ipfire/menu.d/20-status.menu var/ipfire/menu.d/30-network.menu diff --git a/config/rootfiles/core/168/update.sh b/config/rootfiles/core/168/update.sh index 45b530c90..4b525170b 100644 --- a/config/rootfiles/core/168/update.sh +++ b/config/rootfiles/core/168/update.sh @@ -78,12 +78,21 @@ extract_files # update linker config ldconfig +# Run IDSv4 converter +convert-ids-backend-files + # Update Language cache /usr/local/bin/update-lang-cache # Filesytem cleanup /usr/local/bin/filesystem-cleanup +# Delete orphaned Oinkmaster and Suricata default ruleset +rm -vf \ + /usr/local/bin/oinkmaster.pl \ + /var/ipfire/suricata/oinkmaster.conf \ + /var/ipfire/suricata/suricata-default-rules.yaml + # Apply local configuration to sshd_config /usr/local/bin/sshctrl @@ -95,6 +104,7 @@ chmod -v 750 /etc/sudoers.d chmod -v 640 /etc/sudoers.d/* # Start services +/etc/init.d/fcron restart /etc/init.d/sshd restart /etc/init.d/vnstatd restart /etc/init.d/squid start hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. 4d4f5df0c8b4e212cec1fd1206616308584df18e
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via 4d4f5df0c8b4e212cec1fd1206616308584df18e (commit) via 1a9e81ce7f999628536c5fa33928f3e79a7d84cc (commit) via 504fb53bcc1eb03af782d800b77ee6a1b6e4077b (commit) via 91a8664b662ed506a7896b638c6d9d140485a5aa (commit) via 249d796b4b873fde6e4bf270b7028afe8073abc2 (commit) via adce5b1c8fc21916c77d7e8a40cbed2baac1f2a2 (commit) via 615fd78f9294b2843e396f3e70b2181d8491725d (commit) via c8adaee1958ed0c382341e08949d5cb88bd58c7e (commit) via 1febad2ad41578d3e77195929076e3cbbc28a89f (commit) via 07dc722f611685c6018630f927ad4b65f44988d1 (commit) via e41ee3e0f24cb89b20a758e2281531ed76577ef4 (commit) via c62121c7e4ef9ec5688e16b04ef59e21276e1bd0 (commit) via 782418e226434fbd7fbd236699a45bce328dcd6d (commit) via 38cf581405290ac9781793e8785cbdf0e210dced (commit) via eaf5364413ab44dff0640396653fef4e39ace4d7 (commit) via 6bef05b9ed1eacb57f66f565def49bbfe6400946 (commit) via 7c4b8df7163e60bc05867531e3d2a7001eb2af59 (commit) via da5c7c24f022751ff4d8dfb68c65d0e60801a626 (commit) via b3dbe9ef6462b90198f969dcf42bb17f9c4b427f (commit) via 7bc15b982c7ce3bd0b6d3cf752e1e42abba4fe1d (commit) via f7eedacb43e81dd8acd031f1ed7680fd0bf3b2b9 (commit) via 5bad33e9a4bae9e15979087df3420c30dd5afd6c (commit) via 00271ed769a64e309498c8c5ab2267c0e5982957 (commit) via b645f7fc8675a9caa014b83dff6e7d012a4802c8 (commit) via 93af000b8b3f86008040cb5a62405b158c270fe7 (commit) via d2bf4d377f698076e53a56a9784a0b70d8ed3388 (commit) via 0d99255c0614d0218912724b97f6cfdb4811a895 (commit) via d44d4ccf34132b77c8cf3d4ace7eab99a4717a53 (commit) via b75baeff28412bec16dd72e4251d24c371c3fd5d (commit) via 2e558477da7438d2bd79411279ae1502f044c787 (commit) via a2c56ead7367995ff743cc5c75aec8c4fb195f83 (commit) via a15c9b16b404bc1970fd016104560e8fd24b5edb (commit) via c2eac6fcd4281834409700066b25061d15ca0d6c (commit) via b570d35c0aff4c1d126be539bbb009830a1fbb7f (commit) via 4f513522feeb88a447a861d414eead6432ce784f (commit) via c215cfd8873130362b0665696e06a79279f79abd (commit) via 70b1672d94f3f6c3cfe82bf65df65125df0b0014 (commit) via 9f7702544abc0a906d14ccdcf0e4b03239a8fc33 (commit) via c00609ce56cab337d352e69599144683192dec8f (commit) via 2f154264a02a560b0ef4ff6777833330a110f2a4 (commit) via 39b5adb9404ae1b986e75437c4203752da8e9167 (commit) via 990d111d70b7f5276b5ff3b6729773f1066fcee7 (commit) via 149a3291df07c0b1ba0384b83509bb6a62a1eae2 (commit) via faa8c62f6377cf6efa2b4edef1bbe77ede248867 (commit) via 44d41fd692ea695708c9cd51ecbf1fab2c7a5c28 (commit) via 1aaa347774a96e54daf26ff0762e63731e94a629 (commit) via 25652a75d485eaf500a60326373f66e56b902c70 (commit) via 30c4a9ff35117388ce3061ad44280967e1f4cf86 (commit) via 8d6714edc8c957214506bc483bc51edc06c94554 (commit) via fa7663a1b594dcfd4bf542eb34a0869d5280e38f (commit) via 81144407528319a53fd0e8ea6852158c56ab7612 (commit) via 432b8ed21e0fa9c0ee4cca360dfd881348ba62a0 (commit) via 849fc8ea15a861a97f2e4d9c74804115fd15ecf5 (commit) via 443ad51d1c33550eafc62320865046510b7be8fc (commit) via 4c98be8bd21c95b9bb576e211e633bf507388234 (commit) via 9f353f8518b93fb1b4f76663088d36d321e8e3f2 (commit) via 2deba6bf4a6b866713ee000a91457802101fa893 (commit) via 794469483f26e514e13648a07483d19e2372ecb7 (commit) via 5a6c7bbe85a24faddf3c5f495d28a6ae6004514f (commit) via 518cbdd38905ed7909f7dfe218957cbc828a004c (commit) via e246285af4c98647217fe96a48d794f959ebf3d8 (commit) via e0eb5bc737fa807a574b4f5bf5c42977d55201fb (commit) via ff780d8b3fa6b91fe9d8560684232381b81b5498 (commit) via 74019d3044117bc84646fec22e6a88833a131790 (commit) via 9a3f9c2b234457e6cfda54f7ee3746781ba503b5 (commit) via c9c3eadbbffeee8a4f46365e917f619939dee9f1 (commit) via d1f7542659cc7ecaaad551f813b0cb32a4734351 (commit) via 65e3aef5835a5e681bdd2af292e4c547c0d196d0 (commit) via 52a557a848c3f744278aec91d7e16ff1f5c24833 (commit) via e26edcc1c7cac6235f7d60c527f980895fc3fe5a (commit) via 0f2c5211f6d8b183a8496ff208c20ca5ddc0c6c6 (commit) via 235e3e92a32a95339c177a94371b22c4bc0877a6 (commit) via 061391e77601082727e64e40dfa352f89be18ce1 (commit) via f264adda359ec58846840e60d9743ca522fa4004 (commit) via 7d8956083b76babafef3c8e82fb32c4f243424c3 (commit) via 304ce130fd1e19de6a4faf9834784e0d821c02c1 (commit) via e71804fb821acf84ef4ad06fcaf80dda6fe8af0c (commit) via de1199e2a32e9f177ea237392b0ae22b5f8a2b87 (commit) from e47f7c8295ef92b6ee40ce88154d4449c4b29f19 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 4d4f5df0c8b4e212cec1fd1206616308584df18e Merge: e47f7c829 1a9e81ce7 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 16:07:41 2022 +0000 Merge branch 'temp-stevee-idsv4' into next commit 1a9e81ce7f999628536c5fa33928f3e79a7d84cc Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Tue Apr 26 05:24:47 2022 +0200 ids.cgi: Remove etag data when deleting a provider. Otherwise the same provider could not be added again at a later time if the stored etag is still valid. In this case the server will not offer the rules and the provider could not be added. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 504fb53bcc1eb03af782d800b77ee6a1b6e4077b Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Tue Apr 26 05:23:44 2022 +0200 ids-functions.pl: Add remove_from_etags() function. This function is used to drop the stored etags data of a given provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 91a8664b662ed506a7896b638c6d9d140485a5aa Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Apr 25 21:15:23 2022 +0200 Revert "ruleset-sources: Remove support for PT Attack Team Detection rules." The ruleset provider has recovered his github presence. This reverts commit c8adaee1958ed0c382341e08949d5cb88bd58c7e. commit 249d796b4b873fde6e4bf270b7028afe8073abc2 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Apr 25 20:12:19 2022 +0200 convert-ids-backend-files: Wait until suricata has stopped sucessfully. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit adce5b1c8fc21916c77d7e8a40cbed2baac1f2a2 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 13:31:51 2022 +0200 convert-ids-backend-files: Stop and start suricata during runtime. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 615fd78f9294b2843e396f3e70b2181d8491725d Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 09:13:41 2022 +0200 convert-ids-backend-files: Set correct ownership for suricata used rulefiles file. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c8adaee1958ed0c382341e08949d5cb88bd58c7e Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 05:47:21 2022 +0200 ruleset-sources: Remove support for PT Attack Team Detection rules. All of a sudden this ruleset provider has dissapeared from Github. I was not able to find any further details or web page or the ruleset anymore. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 1febad2ad41578d3e77195929076e3cbbc28a89f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 05:45:56 2022 +0200 ids.cgi: Avoid doubble locking the page when forcing a ruleset update. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 07dc722f611685c6018630f927ad4b65f44988d1 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 05:44:23 2022 +0200 ids.cgi: Make the page lock in oinkmaster_web() function optional. This allows to call and release the page lock manually. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit e41ee3e0f24cb89b20a758e2281531ed76577ef4 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 22 05:31:28 2022 +0200 ids-functions.pl: Avoid suricata from loading rulesfiles of an unsupported provider. Modify the write_used_rulefiles_file() function to skip the rulesfiles of unsupported providers. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c62121c7e4ef9ec5688e16b04ef59e21276e1bd0 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Wed Apr 20 20:58:04 2022 +0200 ids-functions.pl: Try to enumerate the dl_rulesfile if a provider is not supported anymore. In this case the details about the file suffix is not available in the ruleset-sources file anymore. In this case now the function tries to enumerate the correct filename. This allows to display the correct stats in the WUI and to extract and use the downloaded ruleset of the provider until it got deleted by the user. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 782418e226434fbd7fbd236699a45bce328dcd6d Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Tue Apr 19 15:10:31 2022 +0200 Add missing german translation strings. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 38cf581405290ac9781793e8785cbdf0e210dced Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 17 16:38:21 2022 +0200 ids-functions.pl: Remove temporary files if the downloader aborts. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit eaf5364413ab44dff0640396653fef4e39ace4d7 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 17 15:21:20 2022 +0200 ids.cgi: Disable manual update button if a provider is not longer supported. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 6bef05b9ed1eacb57f66f565def49bbfe6400946 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 17 15:03:56 2022 +0200 ids.cgi: Proper handle providers which are not longer supported. They will be shown with a different background colour to get the users attention. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 7c4b8df7163e60bc05867531e3d2a7001eb2af59 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 17 15:02:41 2022 +0200 update-ids-ruleset: Skip unsupported providers. In case a configured provider is not longer supported, simply skip it and do not try to perform an update. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit da5c7c24f022751ff4d8dfb68c65d0e60801a626 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 16:02:28 2022 +0200 ids.cgi: Remove orphaned headline. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit b3dbe9ef6462b90198f969dcf42bb17f9c4b427f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:57:34 2022 +0200 backup.pl: Run convert-ids-backend-files converter. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 7bc15b982c7ce3bd0b6d3cf752e1e42abba4fe1d Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:54:44 2022 +0200 backup: Add files for new IDS backend. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit f7eedacb43e81dd8acd031f1ed7680fd0bf3b2b9 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:51:06 2022 +0200 convert-ids-backend-files: Restart suricata if the IDS is running. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 5bad33e9a4bae9e15979087df3420c30dd5afd6c Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:32:27 2022 +0200 ids.cgi: Display return code on download error, when adding a new provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 00271ed769a64e309498c8c5ab2267c0e5982957 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:30:03 2022 +0200 ids.cgi: Handle "Not modified" when forcing an ruleset update. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit b645f7fc8675a9caa014b83dff6e7d012a4802c8 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 15:12:58 2022 +0200 ids.cgi: Do not longer use hard-coded status messages in oinkmaster_web() function. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 93af000b8b3f86008040cb5a62405b158c270fe7 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:54:11 2022 +0200 oinkmaster: Drop package. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit d2bf4d377f698076e53a56a9784a0b70d8ed3388 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:51:48 2022 +0200 suricata: Rootfile update. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 0d99255c0614d0218912724b97f6cfdb4811a895 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:49:52 2022 +0200 suricata: Create empty threshold.config file. The file is referenced in the suricata config file and if not present some ugly warnings will be displayed/logged during startup. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit d44d4ccf34132b77c8cf3d4ace7eab99a4717a53 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:48:35 2022 +0200 suricata: Create directory to store the downloaded ruleset files. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit b75baeff28412bec16dd72e4251d24c371c3fd5d Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:42:22 2022 +0200 suricata: Do not longer install YAML file for default rules. This file got obsolete, because it's content will be generated dynamically by the backend code. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 2e558477da7438d2bd79411279ae1502f044c787 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 16 14:39:09 2022 +0200 convert-ids-backend-files: Convert MONITOR_TRAFFIC_ONLY settings. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit a2c56ead7367995ff743cc5c75aec8c4fb195f83 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 06:02:49 2022 +0200 ids-functions.pl: Remove read_enabled_disabled_sids_file() function. Not longer needed and therefore dead code. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit a15c9b16b404bc1970fd016104560e8fd24b5edb Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:59:33 2022 +0200 IDS: Move autoupdate logic to cron. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c2eac6fcd4281834409700066b25061d15ca0d6c Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:52:01 2022 +0200 convert-ids-backend-files: Move already downloaded files to new location. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit b570d35c0aff4c1d126be539bbb009830a1fbb7f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:19:20 2022 +0200 ids-functions.pl: Change location for downloaded rulesfiles to "/var/cache/suricata/". Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 4f513522feeb88a447a861d414eead6432ce784f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:18:37 2022 +0200 ids-functions.pl: Do not use a hard-code temporary download location. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c215cfd8873130362b0665696e06a79279f79abd Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:13:23 2022 +0200 convert-ids-backend-files: Remove old backend related files. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 70b1672d94f3f6c3cfe82bf65df65125df0b0014 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:12:56 2022 +0200 convert-ids-backend-files: Remove converted files. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 9f7702544abc0a906d14ccdcf0e4b03239a8fc33 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Apr 15 05:10:45 2022 +0200 convert-ids-backend-files: Regenerate ruleset and used rulesets file. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c00609ce56cab337d352e69599144683192dec8f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Apr 14 05:47:55 2022 +0200 convert-ids-backend-files: Successor of the convert-ids-modifications-files converter. This converter also will convert the used rulesfiles file for the providers. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 2f154264a02a560b0ef4ff6777833330a110f2a4 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Apr 14 05:16:25 2022 +0200 ids.cg: Regeneate ruleset if the ruleset action (mode) of a provider get changed. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 39b5adb9404ae1b986e75437c4203752da8e9167 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Apr 11 05:57:05 2022 +0200 update-ids-ruleset: Only regenerate and reload ruleset on at least one successfull update. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 990d111d70b7f5276b5ff3b6729773f1066fcee7 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Apr 11 05:48:17 2022 +0200 ids-functions.pl: Add support for Etags. Etags are used to itentify if an ressource has been changed by sending a special request and an Etag value to the server. If the ressource has changed the server will serve the new content otherwise it will return the 304 (Not-Modified) code. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 149a3291df07c0b1ba0384b83509bb6a62a1eae2 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Apr 11 05:47:15 2022 +0200 ids.cgi: Do not double display a working notice when removing a ruleset provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit faa8c62f6377cf6efa2b4edef1bbe77ede248867 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 10 11:25:36 2022 +0200 ids.cgi: Use new oinkmaster_web function instead the silent one from ids-functions. This will print some nice status messages while the page is locked and the IDS rules get regenerated/altered. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 44d41fd692ea695708c9cd51ecbf1fab2c7a5c28 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 10 11:23:49 2022 +0200 ids.cgi: Add oinkmaster_web () function. This function is used to regenerate the entire ruleset similar to the one from ids-functions, but is enhanced to print additional status messages. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 1aaa347774a96e54daf26ff0762e63731e94a629 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 10 11:19:41 2022 +0200 ids.cgi: Allow to split working_notice function into two parts. This allows to open the notice and close it at a later time. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 25652a75d485eaf500a60326373f66e56b902c70 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Apr 10 11:17:05 2022 +0200 ids.cgi: Keep IDS/IPS mode settings when enabling/disabling a provider or autoupdate for it. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 30c4a9ff35117388ce3061ad44280967e1f4cf86 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 9 14:46:39 2022 +0200 ids.cgi: Adjust code to use new used-rulesfiles backend. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 8d6714edc8c957214506bc483bc51edc06c94554 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Apr 9 13:11:18 2022 +0200 ids-functions.pl: Change backend to use one file to load the used rulefiles. Suricata seems to struggle when using multiple and/or nested includes in the same config section. This results in a only partially loaded confguration where not all rulefiles are loaded and used. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit fa7663a1b594dcfd4bf542eb34a0869d5280e38f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 12:26:35 2022 +0100 ids.cgi: Remove newly added provider if the rules could not be downloaded. When adding a new provider and in case the rules file or tarball can not be downloaded, the provider remains as configured. To avoid that, the provider needs to be removed again. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 81144407528319a53fd0e8ea6852158c56ab7612 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 18:59:42 2022 +0100 convert-ids-modification-files: New converter. This converter is responsible to convert the old oinkmaster modification files into the new files and format. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 432b8ed21e0fa9c0ee4cca360dfd881348ba62a0 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:54:19 2022 +0100 ids.cgi: Drop last fragments from old modify sids backend. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 849fc8ea15a861a97f2e4d9c74804115fd15ecf5 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 18:08:49 2022 +0100 ids-functions.pl: Drop oinkmaster related functions and declarations. They are not longer needed and safely can be dropped. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 443ad51d1c33550eafc62320865046510b7be8fc Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 16:52:19 2022 +0100 ids.cgi: Allow to configure IDS/IPS mode individually for each provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 4c98be8bd21c95b9bb576e211e633bf507388234 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 16:33:20 2022 +0100 ids.cgi: Use new provider modifications backend. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 9f353f8518b93fb1b4f76663088d36d321e8e3f2 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 16:11:12 2022 +0100 ids.cgi: Use new backend to store the ruleset modifications of a provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 2deba6bf4a6b866713ee000a91457802101fa893 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 16:10:01 2022 +0100 ids-functions.pl: Use "enabled/disabled" to mark if a rule should be altered. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 794469483f26e514e13648a07483d19e2372ecb7 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 15:47:52 2022 +0100 ids-functions.pl: Replace call of external oinkmaster.pl to newly introduced process_ruleset function. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 5a6c7bbe85a24faddf3c5f495d28a6ae6004514f Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 15:44:37 2022 +0100 ids-functions.pl: Add process_ruleset() function. This function is going to replace the part which currently the oinkmaster.pl script does. It will read in the extracted ruleset, remove duplicates and alter the rules to alert or drop in case they match. Also rules will be enabled or disabled if the used requested this. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 518cbdd38905ed7909f7dfe218957cbc828a004c Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 15:34:57 2022 +0100 ids-functions.pl: Add get_provider_ruleset_modifications_file(). This function will obosolete the old oinkmaster modifications files. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit e246285af4c98647217fe96a48d794f959ebf3d8 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 15:34:10 2022 +0100 ids-functions.pl: Add private function to obtain the sid and rev of a rule. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit e0eb5bc737fa807a574b4f5bf5c42977d55201fb Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sun Mar 20 15:33:09 2022 +0100 ids-functions.pl: Add get_providers_mode() function. This function is used to gather the modes of the configured providers and return them as hash. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit ff780d8b3fa6b91fe9d8560684232381b81b5498 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:27:01 2022 +0100 update-ids-ruleset: Fix typo in return code. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 74019d3044117bc84646fec22e6a88833a131790 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:23:44 2022 +0100 update-ids-ruleset: Skip providers which are not enabled. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 9a3f9c2b234457e6cfda54f7ee3746781ba503b5 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:22:50 2022 +0100 update-ids-ruleset: Log and abort if to less free disk space is available. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit c9c3eadbbffeee8a4f46365e917f619939dee9f1 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:22:08 2022 +0100 update-ids-ruleset: Add logging for various events. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit d1f7542659cc7ecaaad551f813b0cb32a4734351 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:18:38 2022 +0100 update-ids-ruleset: Add function to iherit with the syslog daemon. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 65e3aef5835a5e681bdd2af292e4c547c0d196d0 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:17:06 2022 +0100 ids-functionsn.pl: Remove logging calls when checking free diskspace. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 52a557a848c3f744278aec91d7e16ff1f5c24833 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Sat Mar 26 11:14:40 2022 +0100 ids-functions.pl: Remove logging calls from downloader. The download script should not directly do the logging stuff. It simply should download the files for the requested provider and return an error code on fail. The logging should be done at another place. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit e26edcc1c7cac6235f7d60c527f980895fc3fe5a Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Fri Mar 25 06:03:40 2022 +0100 ids-functions.pl: Provide better return codes, if the downloader fails. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 0f2c5211f6d8b183a8496ff208c20ca5ddc0c6c6 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Mar 24 21:17:59 2022 +0100 ids-functions.pl: Limit downloader to only one provider. Remove the option and required code to download the rulesets for all configured and enabled providers by just calling the downloader function. This cause a lot of troubles and if required, directly should be handled by the processing script. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 235e3e92a32a95339c177a94371b22c4bc0877a6 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Mar 24 21:17:08 2022 +0100 ids-functions.pl: Add get_subscription_code() function. This function can be used to obtain the subscription code of a given configured provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 061391e77601082727e64e40dfa352f89be18ce1 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Mar 24 20:51:56 2022 +0100 ids-functions.pl: Use If-Modified-Since header to reduce file downloads. When using the "If-Modified-Since" header, the server can be requested if a modified version of the file can be served. In case that is true, the file will be sent and stored by the downloader function. If the file has not been touched since the last time, the server will respond with the code "304" (Not modified). This tells us, that the current stored file is the latest one (still up-to-date) and we safely can skip the download attempt for this provider. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit f264adda359ec58846840e60d9743ca522fa4004 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Mar 24 20:29:21 2022 +0100 ids-functions.pl: Re-order download request handler creation. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 7d8956083b76babafef3c8e82fb32c4f243424c3 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Thu Mar 24 20:18:58 2022 +0100 ids-functions.pl: Early load required perl modules. This will help us to determine if all required perl modules and their dependencies are avail and load-able. It also prevents us from doubble loading modules and makes development and maintainance more easy. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit 304ce130fd1e19de6a4faf9834784e0d821c02c1 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Mar 21 20:21:21 2022 +0100 ids-functions.pl: Remove temporary file, if the download failed. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit e71804fb821acf84ef4ad06fcaf80dda6fe8af0c Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Mar 21 20:19:25 2022 +0100 ids-functions.pl: Allow "3" download attempts for each provider before fail. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> commit de1199e2a32e9f177ea237392b0ae22b5f8a2b87 Author: Stefan Schantl <stefan.schantl(a)ipfire.org> Date: Mon Mar 21 19:52:04 2022 +0100 ids-functions.pl: Drop downloader code for sourcefire based ruleset. Even if the servers do not support HEAD requests, the remote filesize (content_length) can be obtained from the connection headers. This generic method works for all servers and therefore we do not need the code for handle sourcefire servers in a different way anymore. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/backup/backup.pl | 6 + config/backup/include | 7 +- config/cfgroot/ids-functions.pl | 992 ++++++++++++++-------------- config/cron/crontab | 3 + config/oinkmaster/oinkmaster.conf | 429 ------------ config/rootfiles/common/oinkmaster | 2 - config/rootfiles/common/suricata | 3 +- config/suricata/convert-ids-backend-files | 276 ++++++++ config/suricata/suricata-default-rules.yaml | 18 - config/suricata/suricata.yaml | 5 +- html/cgi-bin/ids.cgi | 459 ++++++------- langs/de/cgi-bin/de.pl | 8 + langs/en/cgi-bin/en.pl | 8 + lfs/oinkmaster | 79 --- lfs/suricata | 18 +- make.sh | 1 - src/scripts/update-ids-ruleset | 116 +++- 17 files changed, 1126 insertions(+), 1304 deletions(-) delete mode 100644 config/oinkmaster/oinkmaster.conf delete mode 100644 config/rootfiles/common/oinkmaster create mode 100644 config/suricata/convert-ids-backend-files delete mode 100644 config/suricata/suricata-default-rules.yaml delete mode 100644 lfs/oinkmaster Difference in files: diff --git a/config/backup/backup.pl b/config/backup/backup.pl index 8ea399bb9..7094ed610 100644 --- a/config/backup/backup.pl +++ b/config/backup/backup.pl @@ -175,6 +175,12 @@ restore_backup() { convert-ids-multiple-providers fi + # IDS backend converter. + if [ -e "/var/ipfire/suricata/oinkmaster.conf" ]; then + # Run the converter + convert-ids-backend-files + fi + # Convert DNS settings convert-dns-settings diff --git a/config/backup/include b/config/backup/include index cc4dc27dd..d310b8487 100644 --- a/config/backup/include +++ b/config/backup/include @@ -24,6 +24,7 @@ root/.bash_history root/.gitconfig root/.ssh srv/web/ipfire/html/proxy.pac +var/cache/suricata var/ipfire/auth/users var/ipfire/backup/addons/backup var/ipfire/backup/exclude.user @@ -48,9 +49,7 @@ var/ipfire/ppp var/ipfire/proxy var/ipfire/qos/* var/ipfire/qos/bin/qos.sh -var/ipfire/suricata/*.conf -var/ipfire/suricata/*.yaml -var/ipfire/suricata/providers-settings +var/ipfire/suricata var/ipfire/*/settings var/ipfire/time/ var/ipfire/urlfilter @@ -60,5 +59,3 @@ var/log/ip-acct/* var/log/rrd/* var/log/rrd/collectd var/log/vnstat -var/tmp/idsrules-*.tar.gz -var/tmp/idsrules-*.rules diff --git a/config/cfgroot/ids-functions.pl b/config/cfgroot/ids-functions.pl index 94dccc8ae..ec4fdacc5 100644 --- a/config/cfgroot/ids-functions.pl +++ b/config/cfgroot/ids-functions.pl @@ -29,14 +29,41 @@ require '/var/ipfire/general-functions.pl'; require "${General::swroot}/network-functions.pl"; require "${General::swroot}/suricata/ruleset-sources"; +# Load perl module to deal with Archives. +use Archive::Tar; + +# Load perl module to deal with files and path. +use File::Basename; + +# Load module to move files. +use File::Copy; + +# Load module to recursely remove files and a folder. +use File::Path qw(rmtree); + +# Load module to get file stats. +use File::stat; + +# Load module to deal with temporary files. +use File::Temp; + +# Load module to deal with the date formats used by the HTTP protocol. +use HTTP::Date; + +# Load the libwwwperl User Agent module. +use LWP::UserAgent; + +# Load function from posix module to format time strings. +use POSIX qw (strftime); + +# Load module to talk to the kernel log daemon. +use Sys::Syslog qw(:DEFAULT setlogsock); + # Location where all config and settings files are stored. our $settingsdir = "${General::swroot}/suricata"; # File where the main file for providers ruleset inclusion exists. -our $suricata_used_providers_file = "$settingsdir/suricata-used-providers.yaml"; - -# File for static ruleset inclusions. -our $suricata_default_rulefiles_file = "$settingsdir/suricata-default-rules.yaml"; +our $suricata_used_rulesfiles_file = "$settingsdir/suricata-used-rulesfiles.yaml"; # File where the addresses of the homenet are stored. our $homenet_file = "$settingsdir/suricata-homenet.yaml"; @@ -47,12 +74,6 @@ our $dns_servers_file = "$settingsdir/suricata-dns-servers.yaml"; # File where the HTTP ports definition is stored. our $http_ports_file = "$settingsdir/suricata-http-ports.yaml"; -# File which contains includes for provider specific rule modifications. -our $oinkmaster_provider_includes_file = "$settingsdir/oinkmaster-provider-includes.conf"; - -# File which contains wheater the rules should be changed. -our $modify_sids_file = "$settingsdir/oinkmaster-modify-sids.conf"; - # File which stores the configured IPS settings. our $ids_settings_file = "$settingsdir/settings"; @@ -62,8 +83,12 @@ our $providers_settings_file = "$settingsdir/providers-settings"; # File which stores the configured settings for whitelisted addresses. our $ignored_file = "$settingsdir/ignored"; +# File which stores HTTP Etags for providers which supports them +# for cache management. +our $etags_file = "$settingsdir/etags"; + # Location where the downloaded rulesets are stored. -our $dl_rules_path = "/var/tmp"; +our $dl_rules_path = "/var/cache/suricata"; # File to store any errors, which also will be read and displayed by the wui. our $storederrorfile = "/tmp/ids_storederror"; @@ -105,6 +130,9 @@ my $suricatactrl = "/usr/local/bin/suricatactrl"; # Prefix for each downloaded ruleset. my $dl_rulesfile_prefix = "idsrules"; +# Temporary directory to download the rules files. +my $tmp_dl_directory = "/var/tmp"; + # Temporary directory where the rulesets will be extracted. my $tmp_directory = "/tmp/ids_tmp"; @@ -115,10 +143,7 @@ my $tmp_rules_directory = "$tmp_directory/rules"; my $tmp_conf_directory = "$tmp_directory/conf"; # Array with allowed commands of suricatactrl. -my @suricatactrl_cmds = ( 'start', 'stop', 'restart', 'reload', 'fix-rules-dir', 'cron' ); - -# Array with supported cron intervals. -my @cron_intervals = ('off', 'daily', 'weekly' ); +my @suricatactrl_cmds = ( 'start', 'stop', 'restart', 'reload', 'fix-rules-dir' ); # Array which contains the HTTP ports, which statically will be declared as HTTP_PORTS in the # http_ports_file. @@ -147,10 +172,7 @@ my %tr_app_layer_proto = ( # sub check_and_create_filelayout() { # Check if the files exist and if not, create them. - unless (-f "$oinkmaster_provider_includes_file") { &create_empty_file($oinkmaster_provider_includes_file); } - unless (-f "$modify_sids_file") { &create_empty_file($modify_sids_file); } - unless (-f "$suricata_used_providers_file") { &create_empty_file($suricata_used_providers_file); } - unless (-f "$suricata_default_rulefiles_file") { &create_empty_file($suricata_default_rulefiles_file); } + unless (-f "$suricata_used_rulesfiles_file") { &create_empty_file($suricata_used_rulesfiles_file); } unless (-f "$ids_settings_file") { &create_empty_file($ids_settings_file); } unless (-f "$providers_settings_file") { &create_empty_file($providers_settings_file); } unless (-f "$whitelist_file" ) { &create_empty_file($whitelist_file); } @@ -204,6 +226,42 @@ sub get_enabled_providers () { return @enabled_providers; } +# +## Function to get a hash of provider handles and their configured modes (IDS/IPS). +# +sub get_providers_mode () { + my %used_providers = (); + + # Hash to store the providers and their configured modes. + my %providers_mode = (); + + # Read-in the providers config file. + &General::readhasharray("$providers_settings_file", \%used_providers); + + # Loop through the hash of used_providers. + foreach my $id (keys %used_providers) { + # Skip disabled providers. + next unless ($used_providers{$id}[3] eq "enabled"); + + # Grab the provider handle. + my $provider = "$used_providers{$id}[0]"; + + # Grab the provider mode. + my $mode = "$used_providers{$id}[4]"; + + # Fall back to IDS if no mode could be obtained. + unless($mode) { + $mode = "IDS"; + } + + # Add details to provider_modes hash. + $providers_mode{$provider} = $mode; + } + + # Return the hash. + return %providers_mode; +} + # ## Function for checking if at least 300MB of free disk space are available ## on the "/var" partition. @@ -225,11 +283,8 @@ sub checkdiskspace () { # Check if the available disk space is more than 300MB. if ($available < 300) { - # Log error to syslog. - &_log_to_syslog("Not enough free disk space on /var. Only $available MB from 300 MB available."); - - # Exit function and return "1" - False. - return 1; + # Exit function and return the available disk space. + return $available; } } } @@ -239,46 +294,32 @@ sub checkdiskspace () { } # -## This function is responsible for downloading the configured IDS rulesets or if no one is specified -## all configured rulesets will be downloaded. +## This function is responsible for downloading the ruleset for a given provider. ## -## * At first it gathers all configured ruleset providers, initialize the downloader and sets an -## upstream proxy if configured. -## * After that, the given ruleset or in case all rulesets should be downloaded, it will determine wether it -## is enabled or not. +## * At first it initialize the downloader and sets an upstream proxy if configured. ## * The next step will be to generate the final download url, by obtaining the URL for the desired -## ruleset, add the settings for the upstream proxy. -## * Finally the function will grab all the rules files or tarballs from the servers. +## ruleset and add the settings for the upstream proxy. +## * Finally the function will grab the rule file or tarball from the server. +## It tries to reduce the amount of download by using the "If-Modified-Since" HTTP header. +# +## Return codes: +## +## * "no url" - If no download URL could be gathered for the provider. +## * "not modified" - In case the already stored rules file is up to date. +## * "incomplete download" - When the remote file size differs from the downloaded file size. +## * "$error" - The error message generated from the LWP::User Agent module. # sub downloadruleset ($) { my ($provider) = @_; - # If no provider is given default to "all". - $provider //= 'all'; - - # Hash to store the providers and access id's, for which rules should be downloaded. - my %sheduled_providers = (); - - # Get used provider settings. - my %used_providers = (); - &General::readhasharray("$providers_settings_file", \%used_providers); - - # Check if a ruleset has been configured. - unless(%used_providers) { - # Log that no ruleset has been configured and abort. - &_log_to_syslog("No ruleset provider has been configured."); - - # Return "1". - return 1; - } + # The amount of download attempts before giving up and + # logging an error. + my $max_dl_attempts = 3; # Read proxysettings. my %proxysettings=(); &General::readhash("${General::swroot}/proxy/settings", \%proxysettings); - # Load required perl module to handle the download. - use LWP::UserAgent; - # Init the download module. # # Request SSL hostname verification and specify path @@ -311,161 +352,156 @@ sub downloadruleset ($) { $downloader->proxy(['http', 'https'], $proxy_url); } - # Loop through the hash of configured providers. - foreach my $id ( keys %used_providers ) { - # Skip providers which are not enabled. - next if ($used_providers{$id}[3] ne "enabled"); - - # Obtain the provider handle. - my $provider_handle = $used_providers{$id}[0]; - - # Handle update off all providers. - if (($provider eq "all") || ($provider_handle eq "$provider")) { - # Add provider handle and it's id to the hash of sheduled providers. - $sheduled_providers{$provider_handle} = $id; - } - } + # Grab the download url for the provider. + my $url = $IDS::Ruleset::Providers{$provider}{'dl_url'}; - # Loop through the hash of sheduled providers. - foreach my $provider ( keys %sheduled_providers) { - # Log download/update of the ruleset. - &_log_to_syslog("Downloading ruleset for provider: $provider."); + # Check if the provider requires a subscription. + if ($IDS::Ruleset::Providers{$provider}{'requires_subscription'} eq "True") { + # Grab the subscription code. + my $subscription_code = &get_subscription_code($provider); - # Grab the download url for the provider. - my $url = $IDS::Ruleset::Providers{$provider}{'dl_url'}; + # Add the subscription code to the download url. + $url =~ s/\<subscription_code\>/$subscription_code/g; - # Check if the provider requires a subscription. - if ($IDS::Ruleset::Providers{$provider}{'requires_subscription'} eq "True") { - # Grab the previously stored access id for the provider from hash. - my $id = $sheduled_providers{$provider}; + } - # Grab the subscription code. - my $subscription_code = $used_providers{$id}[1]; + # Abort and return "no url", if no url could be determined for the provider. + return "no url" unless ($url); - # Add the subscription code to the download url. - $url =~ s/\<subscription_code\>/$subscription_code/g; + # Pass the requested URL to the downloader. + my $request = HTTP::Request->new(GET => $url); - } + # Generate temporary file name, located in the tempoary download directory and with a suffix of ".tmp". + # The downloaded file will be stored there until some sanity checks are performed. + my $tmp = File::Temp->new( SUFFIX => ".tmp", DIR => "$tmp_dl_directory/", UNLINK => 0 ); + my $tmpfile = $tmp->filename(); - # Abort if no url could be determined for the provider. - unless ($url) { - # Log error and abort. - &_log_to_syslog("Unable to gather a download URL for the selected ruleset provider."); - return 1; - } + # Call function to get the final path and filename for the downloaded file. + my $dl_rulesfile = &_get_dl_rulesfile($provider); - # Variable to store the filesize of the remote object. - my $remote_filesize; - - # The sourcfire (snort rules) does not allow to send "HEAD" requests, so skip this check - # for this webserver. - # - # Check if the ruleset source contains "snort.org". - unless ($url =~ /\.snort\.org/) { - # Pass the requrested url to the downloader. - my $request = HTTP::Request->new(HEAD => $url); + # Check if the rulesfile already exits, because it has been downloaded in the past. + # + # In this case we are requesting the server if the remote file has been changed or not. + # This will be done by sending the modification time in a special HTTP header. + if (-f $dl_rulesfile) { + # Call stat on the file. + my $stat = stat($dl_rulesfile); - # Accept the html header. - $request->header('Accept' => 'text/html'); + # Omit the mtime of the existing file. + my $mtime = $stat->mtime; - # Perform the request and fetch the html header. - my $response = $downloader->request($request); + # Convert the timestamp into right format. + my $http_date = time2str($mtime); - # Check if there was any error. - unless ($response->is_success) { - # Obtain error. - my $error = $response->status_line(); + # Add the If-Modified-Since header to the request to ask the server if the + # file has been modified. + $request->header( 'If-Modified-Since' => "$http_date" ); + } - # Log error message. - &_log_to_syslog("Unable to download the ruleset. $$error$"); + # Read-in Etags file for known Etags if the file is present. + my %etags = (); + &General::readhash("$etags_file", \%etags) if (-f $etags_file); - # Return "1" - false. - return 1; - } + # Check if an Etag for the current provider is stored. + if ($etags{$provider}) { + # Grab the stored tag. + my $etag = $etags{$provider}; - # Assign the fetched header object. - my $header = $response->headers(); + # Add an "If-None-Match header to the request to ask the server if the + # file has been modified. + $request->header( 'If-None-Match' => $etag ); + } - # Grab the remote file size from the object and store it in the - # variable. - $remote_filesize = $header->content_length; - } + my $dl_attempt = 1; + my $response; - # Load perl module to deal with temporary files. - use File::Temp; + # Download and retry on failure. + while ($dl_attempt <= $max_dl_attempts) { + # Perform the request and save the output into the tmpfile. + $response = $downloader->request($request, $tmpfile); - # Generate temporary file name, located in "/var/tmp" and with a suffix of ".tmp". - my $tmp = File::Temp->new( SUFFIX => ".tmp", DIR => "/var/tmp/", UNLINK => 0 ); - my $tmpfile = $tmp->filename(); + # Check if the download was successfull. + if($response->is_success) { + # Break loop. + last; - # Pass the requested url to the downloader. - my $request = HTTP::Request->new(GET => $url); + # Check if the server responds with 304 (Not Modified). + } elsif ($response->code == 304) { + # Remove temporary file, if one exists. + unlink("$tmpfile") if (-e "$tmpfile"); - # Perform the request and save the output into the tmpfile. - my $response = $downloader->request($request, $tmpfile); + # Return "not modified". + return "not modified"; - # Check if there was any error. - unless ($response->is_success) { + # Check if we ran out of download re-tries. + } elsif ($dl_attempt eq $max_dl_attempts) { # Obtain error. my $error = $response->content; - # Log error message. - &_log_to_syslog("Unable to download the ruleset. $$error$"); + # Remove temporary file, if one exists. + unlink("$tmpfile") if (-e "$tmpfile"); - # Return "1" - false. - return 1; + # Return the error message from response.. + return "$error"; } - # Load perl stat module. - use File::stat; - - # Perform stat on the tmpfile. - my $stat = stat($tmpfile); - - # Grab the local filesize of the downloaded tarball. - my $local_filesize = $stat->size; + # Remove temporary file, if one exists. + unlink("$tmpfile") if (-e "$tmpfile"); - # Check if both file sizes match. - if (($remote_filesize) && ($remote_filesize ne $local_filesize)) { - # Log error message. - &_log_to_syslog("Unable to completely download the ruleset. "); - &_log_to_syslog("Only got $local_filesize Bytes instead of $remote_filesize Bytes. "); - - # Delete temporary file. - unlink("$tmpfile"); + # Increase download attempt counter. + $dl_attempt++; + } - # Return "1" - false. - return 1; - } + # Obtain the connection headers. + my $headers = $response->headers; - # Genarate and assign file name and path to store the downloaded rules file. - my $dl_rulesfile = &_get_dl_rulesfile($provider); + # Get the timestamp from header, when the file has been modified the + # last time. + my $last_modified = $headers->last_modified; - # Check if a file name could be obtained. - unless ($dl_rulesfile) { - # Log error message. - &_log_to_syslog("Unable to store the downloaded rules file. "); + # Get the remote size of the downloaded file. + my $remote_filesize = $headers->content_length; - # Delete downloaded temporary file. - unlink("$tmpfile"); + # Grab the Etag from response it the server provides one. + if ($response->header('Etag')) { + # Add the Etag to the etags hash. + $etags{$provider} = $response->header('Etag'); - # Return "1" - false. - return 1; - } + # Write the etags file. + &General::writehash($etags_file, \%etags); + } - # Load file copy module, which contains the move() function. - use File::Copy; + # Perform stat on the tmpfile. + my $stat = stat($tmpfile); - # Overwrite the may existing rulefile or tarball with the downloaded one. - move("$tmpfile", "$dl_rulesfile"); + # Grab the local filesize of the downloaded tarball. + my $local_filesize = $stat->size; + # Check if both file sizes match. + if (($remote_filesize) && ($remote_filesize ne $local_filesize)) { # Delete temporary file. unlink("$tmpfile"); - # Set correct ownership for the tarball. - set_ownership("$dl_rulesfile"); + # Return "1" - false. + return "incomplete download"; } + # Overwrite the may existing rulefile or tarball with the downloaded one. + move("$tmpfile", "$dl_rulesfile"); + + # Check if we got a last-modified value from the server. + if ($last_modified) { + # Assign the last-modified timestamp as mtime to the + # rules file. + utime(time(), "$last_modified", "$dl_rulesfile"); + } + + # Delete temporary file. + unlink("$tmpfile"); + + # Set correct ownership for the tarball. + set_ownership("$dl_rulesfile"); + # If we got here, everything worked fine. Return nothing. return; } @@ -479,18 +515,9 @@ sub downloadruleset ($) { sub extractruleset ($) { my ($provider) = @_; - # Load perl module to deal with archives. - use Archive::Tar; - # Disable chown functionality when uncompressing files. $Archive::Tar::CHOWN = "0"; - # Load perl module to deal with files and path. - use File::Basename; - - # Load perl module for file copying. - use File::Copy; - # Get full path and downloaded rulesfile for the given provider. my $tarball = &_get_dl_rulesfile($provider); @@ -596,9 +623,6 @@ sub extractruleset ($) { # Extract the file to the temporary directory. $tar->extract_file("$packed_file", "$destination"); } else { - # Load perl module to deal with temporary files. - use File::Temp; - # Generate temporary file name, located in the temporary rules directory and a suffix of ".tmp". my $tmp = File::Temp->new( SUFFIX => ".tmp", DIR => "$tmp_rules_directory", UNLINK => 0 ); my $tmpfile = $tmp->filename(); @@ -647,39 +671,135 @@ sub oinkmaster () { &extractruleset($provider); } - # Load perl module to talk to the kernel syslog. - use Sys::Syslog qw(:DEFAULT setlogsock); + # Call function to process the ruleset and do all modifications. + &process_ruleset(@enabled_providers); - # Establish the connection to the syslog service. - openlog('oinkmaster', 'cons,pid', 'user'); + # Call function to merge the classification files. + &merge_classifications(@enabled_providers); - # Call oinkmaster to generate ruleset. - open(OINKMASTER, "/usr/local/bin/oinkmaster.pl -s -u dir://$tmp_rules_directory -C $settingsdir/oinkmaster.conf -o $rulespath 2>&1 |") or die "Could not execute oinkmaster $!\n"; + # Call function to merge the sid to message mapping files. + &merge_sid_msg(@enabled_providers); - # Log output of oinkmaster to syslog. - while(<OINKMASTER>) { - # The syslog function works best with an array based input, - # so generate one before passing the message details to syslog. - my @syslog = ("INFO", "$_"); + # Cleanup temporary directory. + &cleanup_tmp_directory(); +} - # Send the log message. - syslog(@syslog); +# +## Function to alter the ruleset. +# +sub process_ruleset(@) { + my (@providers) = @_; + + # Hash to store the configured provider modes. + my %providers_mode = &get_providers_mode(); + + # Array to store the extracted rulefile from the temporary rules directory. + my @extracted_rulefiles; + + # Get names of the extracted raw rulefiles. + opendir(DIR, $tmp_rules_directory) or die "Could not read from $tmp_rules_directory. $!\n"; + while (my $file = readdir(DIR)) { + # Ignore single and double dotted files. + next if $file =~ /^\.\.?$/; + + # Add file to the array of extracted files. + push(@extracted_rulefiles, $file); } - # Close the pipe to oinkmaster process. - close(OINKMASTER); + # Close directory handle. + closedir(DIR); - # Close the log handle. - closelog(); + # Loop through the array of providers. + foreach my $provider (@providers) { + # Hash to store the obtained SIDs and REV of each provider. + my %rules = (); - # Call function to merge the classification files. - &merge_classifications(@enabled_providers); + # Hash which holds modifications to apply to the rules. + my %modifications = (); - # Call function to merge the sid to message mapping files. - &merge_sid_msg(@enabled_providers); + # Loop through the array of extraced rulefiles. + foreach my $file (@extracted_rulefiles) { + # Skip file if it does not belong to the current processed provider. + next unless ($file =~ m/^$provider/); - # Cleanup temporary directory. - &cleanup_tmp_directory(); + # Open the rulefile. + open(FILE, "$tmp_rules_directory/$file") or die "Could not read $tmp_rules_directory/$file. $!\n"; + + # Loop through the file content. + while (my $line = <FILE>) { + # Skip blank lines. + next if ($line =~ /^\s*$/); + + # Call function to get the sid and rev of the rule. + my ($sid, $rev) = &_get_sid_and_rev($line); + + # Skip rule if a sid with a higher rev already has added to the rules hash. + next if ($rev le $rules{$sid}); + + # Add the new or rule with higher rev to the hash of rules. + $rules{$sid} = $rev; + } + + # Close file handle. + close(FILE); + } + + # Get filename which contains the ruleset modifications for this provider. + my $modification_file = &get_provider_ruleset_modifications_file($provider); + + # Read file which holds the modifications of the ruleset for the current provider. + &General::readhash($modification_file, \%modifications) if (-f $modification_file); + + # Loop again through the array of extracted rulesfiles. + foreach my $file (@extracted_rulefiles) { + # Skip the file if it does not belong to the current provider. + next unless ($file =~ m/^$provider/); + + # Open the rulefile for writing. + open(RULEFILE, ">", "$rulespath/$file") or die "Could not write to file $rulespath/$file. $!\n"; + + # Open the rulefile for reading. + open(TMP_RULEFILE, "$tmp_rules_directory/$file") or die "Could not read $tmp_rules_directory/$file. $!\n"; + + # Loop through the raw temporary rulefile. + while (my $line = <TMP_RULEFILE>) { + # Get the sid and rev of the rule. + my ($sid, $rev) = &_get_sid_and_rev($line); + + # Check if the current rule is obsoleted by a newer one. + # + # In this case the rev number in the rules hash is higher than the current one. + next if ($rev lt $rules{$sid}); + + # Check if the rule should be enabled or disabled. + if ($modifications{$sid} eq "enabled") { + # Drop the # at the start of the line. + $line =~ s/^\#//; + } elsif ($modifications{$sid} eq "disabled") { + # Add a # at the start of the line to disable the rule. + $line = "#$line" unless ($line =~ /^#/); + } + + # Check if the Provider is set so IPS mode. + if ($providers_mode{$provider} eq "IPS") { + # Replacements for sourcefire rules. + $line =~ s/^#\s*(?:alert|drop)(.+policy balanced-ips alert)/alert${1}/; + $line =~ s/^#\s*(?:alert|drop)(.+policy balanced-ips drop)/drop${1}/; + + # Replacements for generic rules. + $line =~ s/^(#?)\s*(?:alert|drop)/${1}drop/; + $line =~ s/^(#?)\s*drop(.+flowbits:noalert;)/${1}alert${2}/; + } + + # Write line / rule to the target rule file. + print RULEFILE "$line"; + } + + # Close filehandles. + close(RULEFILE); + close(TMP_RULEFILE); + } + } } # @@ -821,9 +941,6 @@ sub merge_sid_msg (@) { ## the rules directory. # sub move_tmp_ruleset() { - # Load perl module. - use File::Copy; - # Do a directory listing of the temporary directory. opendir DH, $tmp_rules_directory; @@ -841,8 +958,6 @@ sub move_tmp_ruleset() { ## Function to cleanup the temporary IDS directroy. # sub cleanup_tmp_directory () { - # Load rmtree() function from file path perl module. - use File::Path 'rmtree'; # Delete temporary directory and all containing files. rmtree([ "$tmp_directory" ]); @@ -870,9 +985,6 @@ sub log_error ($) { sub _log_to_syslog ($) { my ($message) = @_; - # Load perl module to talk to the kernel syslog. - use Sys::Syslog qw(:DEFAULT setlogsock); - # The syslog function works best with an array based input, # so generate one before passing the message details to syslog. my @syslog = ("ERR", "<ERROR> $message"); @@ -915,149 +1027,84 @@ sub _store_error_message ($) { sub _get_dl_rulesfile($) { my ($provider) = @_; - # Gather the download type for the given provider. - my $dl_type = $IDS::Ruleset::Providers{$provider}{'dl_type'}; - - # Obtain the file suffix for the download file type. - my $suffix = $dl_type_to_suffix{$dl_type}; - - # Check if a suffix has been found. - unless ($suffix) { - # Abort return - nothing. - return; - } + # Check if the requested provider is known. + if ($IDS::Ruleset::Providers{$provider}) { + # Gather the download type for the given provider. + my $dl_type = $IDS::Ruleset::Providers{$provider}{'dl_type'}; - # Generate the full filename and path for the stored rules file. - my $rulesfile = "$dl_rules_path/$dl_rulesfile_prefix-$provider$suffix"; + # Obtain the file suffix for the download file type. + my $suffix = $dl_type_to_suffix{$dl_type}; - # Return the generated filename. - return $rulesfile; -} + # Check if a suffix has been found. + unless ($suffix) { + # Abort return - nothing. + return; + } -# -## Tiny function to delete the stored ruleset file or tarball for a given provider. -# -sub drop_dl_rulesfile ($) { - my ($provider) = @_; + # Generate the full filename and path for the stored rules file. + my $rulesfile = "$dl_rules_path/$dl_rulesfile_prefix-$provider$suffix"; - # Gather the full path and name of the stored rulesfile. - my $rulesfile = &_get_dl_rulesfile($provider); + # Return the generated filename. + return $rulesfile; - # Check if the given rulesfile exists. - if (-f $rulesfile) { - # Delete the stored rulesfile. - unlink($rulesfile) or die "Could not delete $rulesfile. $!\n"; + } else { + # A downloaded ruleset for a provider which is not supported anymore is requested. + # + # Try to enumerate the downloaded ruleset file. + foreach my $dl_type (keys %dl_type_to_suffix) { + # Get the file suffix for the supported type. + my $suffix = $dl_type_to_suffix{$dl_type}; + + # Generate possible ruleset file name. + my $rulesfile = "$dl_rules_path/$dl_rulesfile_prefix-$provider$suffix"; + + # Check if such a file exists. + if (-f $rulesfile) { + # Downloaded rulesfile found - Return the filename. + return $rulesfile; + } + } } -} -# -## Tiny function to get/generate the full path and filename for the providers oinkmaster -## modified sids file. -# -sub get_oinkmaster_provider_modified_sids_file ($) { - my ($provider) = @_; - - # Generate the filename. - my $filename = "$settingsdir/oinkmaster-$provider-modified-sids.conf"; - - # Return the filename. - return $filename; + # If we got here, no rulesfile could be determined - return nothing. + return; } # -## Function to directly altering the oinkmaster provider includes file. -## -## Requires tha acition "remove" or "add" and a provider handle. +## Private function to obtain the sid and rev of a rule. # -sub alter_oinkmaster_provider_includes_file ($$) { - my ($action, $provider) = @_; - - # Call function to get the path and name for the given providers - # oinkmaster modified sids file. - my $provider_modified_sids_file = &get_oinkmaster_provider_modified_sids_file($provider); - - # Open the file for reading.. - open (FILE, $oinkmaster_provider_includes_file) or die "Could not read $oinkmaster_provider_includes_file. $!\n"; - - # Read-in file content. - my @lines = <FILE>; - - # Close file after reading. - close(FILE); - - # Re-open the file for writing. - open(FILE, ">", $oinkmaster_provider_includes_file) or die "Could not write to $oinkmaster_provider_includes_file. $!\n"; - - # Loop through the file content. - foreach my $line (@lines) { - # Remove newlines. - chomp($line); +## Returns an array with the sid as first and the rev as second value. +# +sub _get_sid_and_rev ($) { + my ($line) = @_; - # Skip line if we found our given provider and the action should be remove. - next if (($line =~ /$provider/) && ($action eq "remove")); + my @ret; - # Write the read-in line back to the file. - print FILE "$line\n"; + # Use regex to obtain the sid and rev. + if ($line =~ m/.*sid:\s*(.*?);.*rev:\s*(.*?);/) { + # Add the sid and rev to the array. + push(@ret, $1); + push(@ret, $2); } - # Check if the file exists and add the provider if requested. - if ((-f $provider_modified_sids_file) && ($action eq "add")) { - print FILE "include $provider_modified_sids_file\n"; - } - - # Close file handle. - close(FILE); + # Return the array. + return @ret; } # -## Function to read-in the given enabled or disables sids file. +## Tiny function to delete the stored ruleset file or tarball for a given provider. # -sub read_enabled_disabled_sids_file($) { - my ($file) = @_; - - # Temporary hash to store the sids and their state. It will be - # returned at the end of this function. - my %temphash; - - # Open the given filename. - open(FILE, "$file") or die "Could not open $file. $!\n"; - - # Loop through the file. - while(<FILE>) { - # Remove newlines. - chomp $_; - - # Skip blank lines. - next if ($_ =~ /^\s*$/); - - # Skip coments. - next if ($_ =~ /^\#/); - - # Splitt line into sid and state part. - my ($state, $sid) = split(" ", $_); +sub drop_dl_rulesfile ($) { + my ($provider) = @_; - # Skip line if the sid is not numeric. - next unless ($sid =~ /\d+/ ); + # Gather the full path and name of the stored rulesfile. + my $rulesfile = &_get_dl_rulesfile($provider); - # Check if the sid was enabled. - if ($state eq "enablesid") { - # Add the sid and its state as enabled to the temporary hash. - $temphash{$sid} = "enabled"; - # Check if the sid was disabled. - } elsif ($state eq "disablesid") { - # Add the sid and its state as disabled to the temporary hash. - $temphash{$sid} = "disabled"; - # Invalid state - skip the current sid and state. - } else { - next; - } + # Check if the given rulesfile exists. + if (-f $rulesfile) { + # Delete the stored rulesfile. + unlink($rulesfile) or die "Could not delete $rulesfile. $!\n"; } - - # Close filehandle. - close(FILE); - - # Return the hash. - return %temphash; } # @@ -1101,34 +1148,12 @@ sub call_suricatactrl ($) { # Skip current command unless the given one has been found. next unless($cmd eq $option); - # Check if the given command is "cron". - if ($option eq "cron") { - # Check if an interval has been given. - if ($interval) { - # Check if the given interval is valid. - foreach my $element (@cron_intervals) { - # Skip current element until the given one has been found. - next unless($element eq $interval); - - # Call the suricatactrl binary and pass the "cron" command - # with the requrested interval. - &General::system("$suricatactrl", "$option", "$interval"); - - # Return "1" - True. - return 1; - } - } - - # If we got here, the given interval is not supported or none has been given. - Return nothing. - return; - } else { - # Call the suricatactrl binary and pass the requrested - # option to it. - &General::system("$suricatactrl", "$option"); + # Call the suricatactrl binary and pass the requrested + # option to it. + &General::system("$suricatactrl", "$option"); - # Return "1" - True. - return 1; - } + # Return "1" - True. + return 1; } # Command not found - return nothing. @@ -1401,83 +1426,19 @@ sub generate_http_ports_file() { } # -## Function to generate and write the file for used rulefiles file for a given provider. +## Function to write the file that contains the rulefiles which are loaded by suricaa. ## -## The function requires as first argument a provider handle, and as second an array with files. +## This function requires an array of used provider handles. # -sub write_used_provider_rulefiles_file($@) { - my ($provider, @files) = @_; - - # Get the path and file for the provider specific used rulefiles file. - my $used_provider_rulesfile_file = &get_used_provider_rulesfile_file($provider); - - # Open file for used rulefiles. - open (FILE, ">", "$used_provider_rulesfile_file") or die "Could not write to $used_provider_rulesfile_file. $!\n"; - - # Write yaml header to the file. - print FILE "%YAML 1.1\n"; - print FILE "---\n\n"; - - # Write header to file. - print FILE "#Autogenerated file. Any custom changes will be overwritten!\n"; - - # Loop through the array of given files. - foreach my $file (@files) { - # Check if the given filename exists and write it to the file of used rulefiles. - if(-f "$rulespath/$file") { - print FILE " - $file\n"; - } - } - - # Close file after writing. - close(FILE); -} - -# -## Function to write the main file for provider rulesfiles inclusions. -## -## This function requires an array of provider handles. -# -sub write_main_used_rulefiles_file (@) { +sub write_used_rulefiles_file (@) { my (@providers) = @_; - # Call function to write the static rulefiles file. - &_write_default_rulefiles_file(); - - # Open file for used rulefils inclusion. - open (FILE, ">", "$suricata_used_providers_file") or die "Could not write to $suricata_used_providers_file. $!\n"; - - # Write yaml header to the file. - print FILE "%YAML 1.1\n"; - print FILE "---\n\n"; - - # Write header to file. - print FILE "#Autogenerated file. Any custom changes will be overwritten!\n"; - - # Loop through the list of given providers. - foreach my $provider (@providers) { - # Call function to get the providers used rulefiles file. - my $filename = &get_used_provider_rulesfile_file($provider); - - # Check if the file exists and write it into the used rulefiles file. - if (-f $filename) { - # Print the provider to the file. - print FILE "include\: $filename\n"; - } - } - - # Close the filehandle after writing. - close(FILE); -} - -sub _write_default_rulefiles_file () { - # Get enabled application layer protocols. + # Get the enabled application layer protocols. my @enabled_app_layer_protos = &get_suricata_enabled_app_layer_protos(); - # Open file. - open (FILE, ">", $suricata_default_rulefiles_file) or die "Could not write to $suricata_default_rulefiles_file. $!\n"; + # Open the file. + open (FILE, ">", $suricata_used_rulesfiles_file) or die "Could not write to $suricata_used_rulesfiles_file. $!\n"; - # Write yaml header to the file. print FILE "%YAML 1.1\n"; print FILE "---\n\n"; @@ -1521,66 +1482,84 @@ sub _write_default_rulefiles_file () { } } + # Loop through the array of enabled providers. + foreach my $provider (@providers) { + # Skip unsupported providers. + next unless ($IDS::Ruleset::Providers{$provider}); + + # Get the used rulefile for this provider. + my @used_rulesfiles = &get_provider_used_rulesfiles($provider); + + # Check if there are + if(@used_rulesfiles) { + # Add notice to the file. + print FILE "\n#Used Rulesfiles for provider $provider.\n"; + + # Loop through the array of used rulefiles. + foreach my $enabled_rulesfile (@used_rulesfiles) { + # Generate name and full path to the rulesfile. + my $rulesfile = "$rulespath/$enabled_rulesfile"; + + # Write the ruelsfile name to the file. + print FILE " - $rulesfile\n"; + } + } + } + # Close the file handle close(FILE); } # -## Tiny function to generate the full path and name for the used_provider_rulesfile file of a given provider. +## Tiny function to generate the full path and name for the file which stores the used rulefiles of a given provider. # -sub get_used_provider_rulesfile_file ($) { +sub get_provider_used_rulesfiles_file ($) { my ($provider) = @_; - my $filename = "$settingsdir/suricata\-$provider\-used\-rulefiles.yaml"; + my $filename = "$settingsdir/$provider\-used\-rulesfiles"; # Return the gernerated file. return $filename; } # -## Function to generate and write the file for modify the ruleset. +## Tiny function to generate the full path and name for the file which stores the modifications of a ruleset. +# +sub get_provider_ruleset_modifications_file($) { + my ($provider) = @_; + + my $filename = "$settingsdir/$provider\-modifications"; + + # Return the filename. + return $filename; +} + +# +## Function to get the subscription code of a configured provider. # -sub write_modify_sids_file() { - # Get configured settings. - my %idssettings=(); - &General::readhash("$ids_settings_file", \%idssettings); +sub get_subscription_code($) { + my ($provider) = @_; - # Open modify sid's file for writing. - open(FILE, ">$modify_sids_file") or die "Could not write to $modify_sids_file. $!\n"; + my %configured_providers = (); - # Write file header. - print FILE "#Autogenerated file. Any custom changes will be overwritten!\n"; + # Read-in providers settings file. + &General::readhasharray($providers_settings_file, \%configured_providers); - # Check if the traffic only should be monitored. - unless($idssettings{'MONITOR_TRAFFIC_ONLY'} eq 'on') { - # Suricata is in IPS mode, which means that the rule actions have to be changed - # from 'alert' to 'drop', however not all rules should be changed. Some rules - # exist purely to set a flowbit which is used to convey other information, such - # as a specific type of file being downloaded, to other rulewhich then check for - # malware in that file. Rules which fall into the first category should stay as - # alert since not all flows of that type contain malware. - - # These types of rulesfiles contain meta-data which gives the action that should - # be used when in IPS mode. Do the following: - # - # 1. Disable all rules and set the action to 'drop' - # 2. Set the action back to 'alert' if the rule contains 'flowbits:noalert;' - # This should give rules not in the policy a reasonable default if the user - # manually enables them. - # 3. Enable rules and set actions according to the meta-data strings. - - my $policy = 'balanced'; # Placeholder to allow policy to be changed. - - print FILE <<END; -modifysid * "^#(?:alert|drop)(.+policy $policy-ips alert)" | "alert\${1}" -modifysid * "^#(?:alert|drop)(.+policy $policy-ips drop)" | "drop\${1}" -modifysid * "^(#?)(?:alert|drop)" | "\${1}drop" -modifysid * "^(#?)drop(.+flowbits:noalert;)" | "\${1}alert\${2}" -END + # Loop through the hash of configured providers. + foreach my $id (keys %configured_providers) { + # Assign nice human-readable values to the data fields. + my $provider_handle = $configured_providers{$id}[0]; + my $subscription_code = $configured_providers{$id}[1]; + + # Check if the current processed provider is the requested one. + if ($provider_handle eq $provider) { + # Return the obtained subscription code. + return $subscription_code; } + } - # Close file handle. - close(FILE); + # No subscription code found - return nothing. + return; } # @@ -1594,10 +1573,6 @@ sub get_ruleset_date($) { my $date; my $mtime; - # Load neccessary perl modules for file stat and to format the timestamp. - use File::stat; - use POSIX qw( strftime ); - # Get the stored rulesfile for this provider. my $stored_rulesfile = &_get_dl_rulesfile($provider); @@ -1874,48 +1849,63 @@ sub get_red_address() { # ## Function to get the used rules files of a given provider. # -sub read_used_provider_rulesfiles($) { +sub get_provider_used_rulesfiles($) { my ($provider) = @_; + # Hash to store the used rulefiles of the provider. + my %provider_rulefiles = (); + # Array to store the used rulefiles. my @used_rulesfiles = (); - # Get the used rulesefile file for the provider. - my $rulesfile_file = &get_used_provider_rulesfile_file($provider); + # Get the filename which contains the used rulefiles for this provider. + my $used_rulesfiles_file = &get_provider_used_rulesfiles_file($provider); - # Check if the a used rulesfile exists for this provider. - if (-f $rulesfile_file) { - # Open the file or used rulefiles and read-in content. - open(FILE, $rulesfile_file) or die "Could not open $rulesfile_file. $!\n"; + # Read-in file, if it exists. + &General::readhash("$used_rulesfiles_file", \%provider_rulefiles) if (-f $used_rulesfiles_file); - while (<FILE>) { - # Assign the current line to a nice variable. - my $line = $_; + # Loop through the hash of rulefiles which does the provider offer. + foreach my $rulefile (keys %provider_rulefiles) { + # Skip disabled rulefiles. + next unless($provider_rulefiles{$rulefile} eq "enabled"); - # Remove newlines. - chomp($line); + # The General::readhash function does not allow dots as + # key value and limits the key "string" to the part before + # the dot, in case it contains one. + # + # So add the file extension for the rules file manually again. + $rulefile = "$rulefile.rules"; - # Skip comments. - next if ($line =~ /\#/); + # Add the enabled rulefile to the array of enabled rulefiles. + push(@used_rulesfiles, $rulefile); + } - # Skip blank lines. - next if ($line =~ /^\s*$/); + # Return the array of used rulesfiles. + return @used_rulesfiles; +} - # Gather the rulefile. - if ($line =~ /.*- (.*)/) { - my $rulefile = $1; +# +## Function to delete the stored etag data of a given provider. +# +sub remove_from_etags ($) { + my ($provider) = @_; - # Add the rulefile to the array of used rulesfiles. - push(@used_rulesfiles, $rulefile); - } - } + my %etags; - # Close the file. - close(FILE); - } + # Early exit function if the etags file does not exist. + return unless (-f $etags_file); - # Return the array of used rulesfiles. - return @used_rulesfiles; + # Read-in etag file. + &General::readhash("$etags_file", \%etags); + + # Check if the hash contains an entry for the given provider. + if ($etags{$provider}) { + # Drop the entry. + delete($etags{$provider}); + + # Write back the etags file. + &General::writehash("$etags_file", \%etags); + } } # diff --git a/config/cron/crontab b/config/cron/crontab index d94dd65c2..d61d26619 100644 --- a/config/cron/crontab +++ b/config/cron/crontab @@ -62,6 +62,9 @@ HOME=/ # Update location database %hourly,random * [ -f "/var/ipfire/red/active" ] && /usr/local/bin/update-location-database >/dev/null 2>&1 +# Update surciata rules. +%daily,random * [ -f "/var/ipfire/red/active" ] && /usr/local/bin/update-ids-ruleset >/dev/null 2>&1 + # Retry sending spooled mails regularly %hourly * /usr/sbin/dma -q diff --git a/config/oinkmaster/oinkmaster.conf b/config/oinkmaster/oinkmaster.conf deleted file mode 100644 index 4d4ee40ef..000000000 --- a/config/oinkmaster/oinkmaster.conf +++ /dev/null @@ -1,429 +0,0 @@ -# $Id: oinkmaster.conf,v 1.132 2006/02/02 12:05:08 andreas_o Exp $ # - -# This file is pretty big by default, but don't worry. -# The only things required are "path" and "update_files". You must also -# set "url" to point to the correct rules archive for your version of -# Snort, unless you prefer to specify this on the command line. -# The rest in here is just a few recommended defaults, and examples -# how to use all the other optional features and give some ideas how they -# could be used. - -# Remember not to let untrusted users edit Oinkmaster configuration -# files, as things like the PATH to use during execution is defined -# in here. - - -# Use "url = <url>" to specify the location of the rules archive to -# download. The url must begin with http://, https://, ftp://, file:// -# or scp:// and end with .tar.gz or .tgz, and the file must be a -# gzipped tarball what contains a directory named "rules". -# You can also point to a local directory with dir://<directory>. -# Multiple "url = <url>" lines can be specified to grab multiple rules -# archives from different locations. -# -# Note: if URL is specified on the command line, it overrides all -# possible URLs specified in the configuration file(s). -# -# The location of the official Snort rules you should use depends -# on which Snort version you run. Basically, you should go to -# http://www.snort.org/rules/ and follow the instructions -# there to pick the right URL for your version of Snort -# (and remember to update the URL when upgrading Snort in the -# future). You can of course also specify locations to third party -# rules. -# -# As of March 2005, you must register on the Snort site to get access -# to the official Snort rules. This will get you an "oinkcode". -# You then specify the URL as -# http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/<filename> -# For example, if your code is 5a081649c06a277e1022e1284b and -# you use Snort 2.4, the url to use would be (without the wrap): -# http://www.snort.org/pub-bin/oinkmaster.cgi/ -# 5a081649c06a277e1022e1284bdc8fabda70e2a4/snortrules-snapshot-2.4.tar.gz -# See the Oinkmaster FAQ Q1 and http://www.snort.org/rules/ for -# more information. - - -# URL examples follows. Replace <oinkcode> with the code you get on the -# Snort site in your registered user profile. - -# Example for Snort 2.4 -# url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.4.tar.gz -# url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.4.tar.gz - -# Example for Snort-current ("current" means cvs snapshots). -#url = http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-CURRENT.tar.gz - -# Example for Community rules -# url = http://www.snort.org/pub-bin/downloads.cgi/Download/comm_rules/Community-Ru… - -# Example for rules from the Bleeding Snort project -# url = http://www.bleedingsnort.com/bleeding.rules.tar.gz - -# If you prefer to download the rules archive from outside Oinkmaster, -# you can then point to the file on your local filesystem by using -# file://<filename>, for example: -# url = file:///tmp/snortrules.tar.gz - -# In rare cases you may want to grab the rules directly from a -# local directory (don't confuse this with the output directory). -# url = dir:///etc/snort/src/rules - -# Example to use scp to copy the rules archive from another host. -# Only OpenSSH is tested. See the FAQ for more information. -# url = scp://user@somehost.example.com:/somedir/snortrules.tar.gz - -# If you use -u scp://... and need to specify a private ssh key (passed -# as -i <key> to the scp command) you can specify it here or add an -# entry in ~/.ssh/config for the Oinkmaster user as described in the -# OpenSSH manual. -# scp_key = /home/oinkmaster/oinkmaster_privkey - - -# The PATH to use during execution. If you prefer to use external -# binaries (i.e. use_external_bins=1, see below), tar and gzip must be -# found, and also wget if downloading via ftp, http or https. All with -# optional .exe suffix. If you're on Cygwin, make sure that the path -# contains the Cygwin binaries and not the native Win32 binaries or -# you will get problems. -# Assume UNIX style by default: -path = /bin:/usr/bin:/usr/local/bin - -# Example if running native Win32 or standalone Cygwin: -# path = c:\oinkmaster;c:\oinkmaster\bin - -# Example if running standalone Cygwin and you prefer Cygwin style path: -# path = /cygdrive/c/oinkmaster:/cygdrive/c/oinkmaster/bin - - -# We normally use external binaries (wget, tar and gzip) since they're -# already available on most systems and do a good job. If you have the -# Perl modules Archive::Tar, IO::Zlib and LWP::UserAgent, you can use -# those instead if you like. You can set use_external_bins below to -# choose which method you prefer. It's set to 0 by default on Win32 -# (i.e. use Perl modules), and 1 on other systems (i.e. use external -# binaries). The reason for that is that the required Perl modules -# are included on Windows/ActivePerl 5.8.1+, so it's easier to use -# those than to install the ported Unix tools. (Note that if you're -# using scp to download the archive, external scp binary is still -# used.) -# use_external_bins = 0 - - -# Temporary directory to use. This directory must exist when starting and -# Oinkmaster will then create a temporary sub directory in here. -# Keep it as a #comment if you want to use the default. -# The default will be checked for in the environment variables TMP, -# TMPDIR or TEMPDIR, or otherwise use "/tmp" if none of them was set. - -# Example for UNIX. -# tmpdir = /home/oinkmaster/tmp/ - -# Example if running native Win32 or Cygwin. -# tmpdir = c:\tmp - -# Example if running Cygwin and you prefer Cygwin style path. -# tmpdir = /cygdrive/c/tmp - - -# The umask to use during execution if you want it to be something -# else than the current value when starting Oinkmaster. -# This will affect the mode bits when writing new files. -# Keep it commented out to keep your system's current umask. -# umask = 0027 - - -# Files in the archive(s) matching this regular expression will be -# checked for changes, and then updated or added if needed. -# All other files will be ignored. You can then choose to skip -# individual files by specifying the "skipfile" keyword below. -# Normally you shouldn't need to change this one. -update_files = \.rules$|\.config$|\.conf$|\.txt$|\.map$ - - -# Regexp of keywords that starts a Snort rule. -# May be useful if you create your own ruletypes and want those -# lines to be regarded as rules as well. -# rule_actions = alert|drop|log|pass|reject|sdrop|activate|dynamic - - -# If the number of rules files in the downloaded archive matching the -# 'update_files' regexp is below min_files, or if the number -# of rules is below min_rules, the rules are regarded as broken -# and the update is aborted with an error message. -# Both are set to 1 by default (i.e. the archive is only regarded as -# broken if it's totally empty). -# If you download from multiple URLs, the count is the total number -# of files/rules across all archives. -# min_files = 1 -# min_rules = 1 - - -# By default, a basic sanity check is performed on most paths/filenames -# to see if they contain illegal characters that may screw things up. -# If this check is too strict for your system (e.g. you get bogus -# "illegal characters in filename" errors because of your local language -# etc) and you're sure you want to disable the checks completely, -# set use_path_checks to 0. -# use_path_checks = 1 - - -# If you want Oinkmaster to send a User-Agent HTTP header string -# other than the default one for wget/LWP, set this variable. -# user_agent = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) - - -# You can include other files anywhere in here by using -# "include <file>". <file> will be parsed just like a regular -# oinkmaster.conf as soon as the include statement is seen, and then -# return and continue parsing the rest of the original file. If an -# option is redefined, it will override the previous value. You can use -# as many "include" statements as you wish, and also include even more -# files from included files. Example to load stuff from "/etc/foo.conf". -# include /etc/foo.conf - -# Include file for provider specific includes. -include /var/ipfire/suricata/oinkmaster-provider-includes.conf - -# Include file which defines the runmode of suricata. -include /var/ipfire/suricata/oinkmaster-modify-sids.conf - -####################################################################### -# Files to totally skip (i.e. never update or check for changes) # -# # -# Syntax: skipfile filename # -# or: skipfile filename1, filename2, filename3, ... # -####################################################################### - -# Ignore local.rules from the rules archive by default since we might -# have put some local rules in our own local.rules and we don't want it -# to get overwritten by the empty one from the archive after each -# update. -skipfile local.rules - -# The file deleted.rules contains rules that have been deleted from -# other files, so there is usually no point in updating it. -skipfile deleted.rules - -# Also skip snort.conf by default since we don't want to overwrite our -# own snort.conf if we have it in the same directory as the rules. If -# you have your own production copy of snort.conf in another directory, -# it may be really nice to check for changes in this file though, -# especially since variables are sometimes added or modified and -# new/old files are included/excluded. -#skipfile snort.conf - -# You may want to consider ignoring threshold.conf for the same reasons -# as for snort.conf, i.e. if you customize it locally and don't want it -# to become overwritten by the default one. It may be better to put -# local thresholding/suppressing in some local file and still update -# and use the official one though, in case important stuff is added to -# it some day. We do update it by default, but it's your call. -skipfile threshold.conf - -# If you update from multiple URLs at the same time you may need to -# ignore the sid-msg.map (and generate it yourself if you need one) as -# it's usually included in each rules tarball. See the FAQ for more info. -# skipfile sid-msg.map - - - -########################################################################## -# SIDs to modify after each update (only for the skilled/stupid/brave). # -# Don't use it unless you have to. There is nothing that stops you from # -# modifying rules in such ways that they become invalid or generally # -# break things. You have been warned. # -# If you just want to disable SIDs, please skip this section and have a # -# look at the "disablesid" keyword below. # -# # -# You may specify multiple modifysid directives for the same SID (they # -# will be processed in order of appearance), and you may also specify a # -# list of SIDs on which the substitution should be applied. # -# If the argument is in the form something.something it's regarded # -# as a filename and the substitution will apply on all rules in that # -# file. The wildcard ("*") can be used to apply the substitution on all # -# rules regardless of the SID or file. Please avoid using #comments # -# at the end of modifysid lines, they may confuse the parser in some # -# situations. # -# # -# Syntax: # -# modifysid SID "replacethis" | "withthis" # -# or: # -# modifysid SID1, SID2, SID3, ... "replacethis" | "withthis" # -# or: # -# modifysid file "replacethis" | "withthis" # -# or: # -# modifysid * "replacethis" | "withthis" # -# # -# The strings within the quotes will basically be passed to a # -# s/replacethis/withthis/ statement in Perl, so they must be valid # -# regular expressions. The strings are case-insensitive and only the # -# first occurrence will be replaced. If there are multiple occurrences # -# you want to replace, simply repeat the same modifysid line. # -# As the strings are regular expressions, you MUST escape special # -# characters like $ \ / ( ) | by prepending a "\" to them. # -# # -# If you specify a modifysid statement for a multi-line rule, Oinkmaster # -# will first translate the rule into a single-line version and then # -# perform the substitution, so you don't have to care about the trailing # -# backslashes and newlines. # -# # -# If you use backreference variables in the substitution expression, # -# it's strongly recommended to specify them as ${1} instead of $1 and so # -# on, to avoid parsing confusion with unexpected results in some # -# situations. Note that modifysid statements will process both active # -# and inactive (disabled) rules. # -# # -# You may want to check out README.templates and template-examples.conf # -# to find how you can simplify the modifysid usage by using templates. # -########################################################################## - -# Example to enable a rule (in this case SID 1325) that is disabled by -# default, by simply replacing leading "#alert" with "alert". -# (You should really use 'enablesid' for this though.) -# Oinkmaster removes whitespaces next to the leading "#" so you don't -# have to worry about that, but be careful about possible whitespace in -# other places when writing the regexps. -# modifysid 1325 "^#alert" | "alert" - -# You could also do this to enable it no matter what type of rule it is -# (alert, log, pass, etc). -# modifysid 1325 "^#" | "" - -# Example to add "tag" stuff to SID 1325. -# modifysid 1325 "sid:1325;" | "sid:1325; tag: host, src, 300, seconds;" - -# Example to make SID 1378 a 'drop' rule (valid if you're running -# Snort_inline). -# modifysid 1378 "^alert" | "drop" - -# Example to replace first occurrence of $EXTERNAL_NET with $HOME_NET -# in SID 302. -# modifysid 302 "\$EXTERNAL_NET" | "\$HOME_NET" - -# You can also specify that a substitution should apply on multiple SIDs. -# modifysid 302,429,1821 "\$EXTERNAL_NET" | "\$HOME_NET" - -# You can take advantage of the fact that it's regular expressions and -# do more complex stuff. This example (for Snort_inline) adds a 'replace' -# statement to SID 1324 that replaces "/bin/sh" with "/foo/sh". -# modifysid 1324 "(content\s*:\s*"\/bin\/sh"\s*;)" | \ -# "${1} replace:"\/foo\/sh";" - -# If you for some reason would like to add a comment inside the actual -# rules file, like the reason why you disabled this rule, you can do -# like this (you would normally add such comments in oinkmaster.conf -# though). -# modifysid 1324 "(.+)" | "# 20020101: disabled this rule just for fun:\n#${1}" - -# Here is an example that is actually useful. Let's say you don't care -# about incoming welchia pings (detected by SID 483 at the time of -# writing) but you want to know when infected hosts on your network -# scans hosts on the outside. (Remember that watching for outgoing -# malicious packets is often just as important as watching for incoming -# ones, especially in this case.) The rule currently looks like -# "alert icmp $EXTERNAL_NET any -> $HOME_NET any ..." -# but we want to switch that so it becomes -# "alert icmp $HOME_NET any -> $EXTERNAL_NET any ...". -# Here is how it could be done. -# modifysid 483 \ -# "(.+) \$EXTERNAL_NET (.+) \$HOME_NET (.+)" | \ -# "${1} \$HOME_NET ${2} \$EXTERNAL_NET ${3}" - -# The wildcard (modifysid * ...) can be used to do all kinds of -# interesting things. The substitution expression will be applied on all -# matching rules. First, a silly example to replace "foo" with "bar" in -# all rules (that have the string "foo" in them, that is.) -# modifysid * "foo" | "bar" - -# If you for some reason don't want to use the stream preprocessor to -# match established streams, you may want to replace the 'flow' -# statement with 'flags:A+;' in all those rules. -# modifysid * "flow:[a-z,_ ]+;" | "flags:A+;" - -# Example to convert all rules of classtype attempted-admin to 'drop' -# rules (for Snort_inline only, obviously). -# modifysid * "^alert (.*classtype\s*:\s*attempted-admin)" | "drop ${1}" - -# This one will append some text to the 'msg' string for all rules that -# have the 'tag' keyword in them. -# modifysid * "(.*msg:\s*".+?)"(\s*;.+;\s*tag:.*)" | \ -# "${1}, going to tag this baby"${2}" - -# There may be times when you want to replace multiple occurrences of a -# certain keyword/string in a rule and not just the first one. To -# replace the first two occurrences of "foo" with "bar" in SID 100, -# simply repeat the modifysid statement: -# modifysid 100 "foo" | "bar" -# modifysid 100 "foo" | "bar" - -# Or you can even specify a SID list but repeat the same SID as many -# times as required, like: -# modifysid 100,100,100 "foo" | "bar" - -# Enable all rules in the file exploit.rules. -# modifysid exploit.rules "^#" | "" - -# Enable all rules in exploit.rules, icmp-info.rules and also SID 1171. -# modifysid exploit.rules, snmp.rules, 1171 "^#" | "" - - - -######################################################################## -# SIDs that we don't want to update. # -# If you for some reason don't want a specific rule to be updated # -# (e.g. you made local modifications to it and you never want to # -# update it and don't care about changes in the official version), you # -# can specify a "localsid" statement for it. This means that the old # -# version of the rule (i.e. the one in the rules file on your # -# harddrive) is always kept, regardless if the official version has # -# been updated. Please do not use this feature unless in special # -# cases as it's easy to end up with many signatures that aren't # -# maintained anymore. See the FAQ for details about this and hints # -# about better solutions regarding customization of rules. # -# # -# Syntax: localsid SID # -# or: localsid SID1, SID2, SID3, ... # -######################################################################## - -# Example to never update SID 1325. -# localsid 1325 - - - -######################################################################## -# SIDs to enable after each update. # -# Will simply remove all the leading '#' for a specified SID (if it's # -# a multi-line rule, the leading '#' for all lines are removed.) # -# These will be processed after all the modifysid and disablesid # -# statements. Using 'enablesid' on a rule that is not disabled is a # -# NOOP. # -# # -# Syntax: enablesid SID # -# or: enablesid SID1, SID2, SID3, ... # -######################################################################## - -# Example to enable SID 1325. -# enablesid 1325 - - - -######################################################################## -# SIDs to comment out, i.e. disable, after each update by placing a # -# '#' in front of the rule (if it's a multi-line rule, it will be put # -# in front of all lines). # -# # -# Syntax: disablesid SID # -# or: disablesid SID1, SID2, SID3, ... # -######################################################################## - -# You can specify one SID per line. -# disablesid 1 -# disablesid 2 -# disablesid 3 - -# And also as comma-separated lists. -# disablesid 4,5,6 - -# It's a good idea to also add comment about why you disable the sid: -# disablesid 1324 # 20020101: disabled this SID just because I can diff --git a/config/rootfiles/common/oinkmaster b/config/rootfiles/common/oinkmaster deleted file mode 100644 index 2557353fa..000000000 --- a/config/rootfiles/common/oinkmaster +++ /dev/null @@ -1,2 +0,0 @@ -usr/local/bin/oinkmaster.pl -var/ipfire/suricata/oinkmaster.conf diff --git a/config/rootfiles/common/suricata b/config/rootfiles/common/suricata index 7f9ff8156..dcb6fe91d 100644 --- a/config/rootfiles/common/suricata +++ b/config/rootfiles/common/suricata @@ -20,6 +20,7 @@ usr/bin/suricata usr/share/suricata #usr/share/suricata/classification.config #usr/share/suricata/reference.config +#usr/share/suricata/threshold.config #usr/share/suricata/rules #usr/share/suricata/rules/app-layer-events.rules #usr/share/suricata/rules/decoder-events.rules @@ -37,7 +38,7 @@ usr/share/suricata #usr/share/suricata/rules/smtp-events.rules #usr/share/suricata/rules/stream-events.rules #usr/share/suricata/rules/tls-events.rules -var/ipfire/suricata/suricata-default-rules.yaml +var/cache/suricata var/lib/suricata var/log/suricata #var/log/suricata/certs diff --git a/config/suricata/convert-ids-backend-files b/config/suricata/convert-ids-backend-files new file mode 100644 index 000000000..614307380 --- /dev/null +++ b/config/suricata/convert-ids-backend-files @@ -0,0 +1,276 @@ +#!/usr/bin/perl +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2021 IPFire Development Team <info(a)ipfire.org> # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see <http://www.gnu.org/licenses/>. # +# # +############################################################################### + +use strict; + +use File::Copy; + +require '/var/ipfire/general-functions.pl'; +require '/var/ipfire/ids-functions.pl'; + +# Exit if there is no main oinkmaster config file anymore. +exit 0 unless (-f "$IDS::settingsdir/oinkmaster.conf"); + +# Array of old files, which are safe to drop. +my @files_to_drop = ( + # Old settings files of oinkmaster. + "$IDS::settingsdir/oinkmaster.conf", + "$IDS::settingsdir/oinkmaster-disabled-sids.conf", + "$IDS::settingsdir/oinkmaster-enabled-sids.conf", + "$IDS::settingsdir/oinkmaster-modify-sids.conf", + "$IDS::settingddir/oinkmaster-provider-includes.conf", + + # Old settingsfiles for suricata. + "$IDS::settingsdir/suricata-default-rules.yaml", + "$IDS::settingsdir/suricata-static-included-rulefiles.yaml", + "$IDS::settingsdir/suricata-used-providers.yaml", + "$IDS::settingsdir/suricata-used-rulefiles.yaml" +); + +# +## Step 1: Stop suricata if it is running. +# +my $start_suricata; + +# Check if the IDS is running. +if(&IDS::ids_is_running()) { + # Call suricatactrl to stop the IDS. + &IDS::call_suricatactrl("stop"); + + # Set start_suricata to true to start it + # at the end of the script again. + $start_suricata = "1"; + + # Wait until suricata has stopped. + sleep 1 while (-f $IDS::idspidfile); +} + +# +## Step 2: Move downloaded files to new location. +# + +my $old_dl_rulesfiles_dir = "/var/tmp"; + +# Open old rules directory and do a directory listsing. +opendir(DIR, "$old_dl_rulesfiles_dir"); + +# Loop through the files of the directory. +while (my $file = readdir(DIR)) { + # Check if the file starts with an "idsrules-". + if ($file =~ /^idsrules-/) { + # Grab the mtime of the file. + my $mtime=(stat "$old_dl_rulesfiles_dir/$file")[9]; + + # Move the file to its new location. + move("$old_dl_rulesfiles_dir/$file", "$IDS::dl_rules_path/$file"); + + # Set correct ownership. + &IDS::set_ownership("$IDS::dl_rules_path/$file"); + + # Restore the mtime on the file. + utime(time(), "$mtime", "$IDS::dl_rules_path/$file"); + } +} + +# Close directory handle. +closedir(DIR); + +# Get all supported providers. +my @providers = &IDS::get_ruleset_providers(); + +# +## Step 3: Convert used rules files. +# + +# Loop through the array of known providers. +foreach my $provider (@providers) { + my %used_rulesfiles = (); + + # Generate old filename which contained the used rulesfile. + my $old_used_rulesfiles_file = "$IDS::settingsdir/suricata-$provider\-used-rulefiles.yaml"; + + # Skip the provider if there is no used rulesfiles file available. + next unless (-f $old_used_rulesfiles_file); + + # Open the used rulesfiles file. + open(FILE, "$old_used_rulesfiles_file"); + + # Read-in the file content. + my @file = <FILE>; + + # Close file handle. + close(FILE); + + # Loop through the file content. + foreach my $line(@file) { + chomp($line); + + # Grab the used rulesfile name from the line. + if ($line =~ /^\s-\s(.*)/) { + my $rulesfile = $1; + + # Add the used rulesfile to the has of used rulesfile for this provider. + $used_rulesfiles{$rulesfile} = "enabled"; + } + } + + # Get the filename for the new used rulesfiles file. + my $used_rulesfiles_file = &IDS::get_provider_used_rulesfiles_file($provider); + + # Write the file. + &General::writehash("$used_rulesfiles_file", \%used_rulesfiles); + + # Set the correct ownership for the new file. + &IDS::set_ownership("$used_rulesfiles_file"); + + # Delete old used rulesfiles file. + unlink("$old_used_rulesfiles_file"); +} + +# +## Step 4: Convert ruleset modifictaion files. +# + +# Loop through the array of providers. +foreach my $provider (@providers) { + my %modifications = (); + + # Generate old filename which hold the ruleset modifications. + my $old_modifications_file = "$IDS::settingsdir/oinkmaster\-$provider\-modified-sids.conf"; + + # Skip provider if there is no modifications file. + next unless (-f $old_modifications_file); + + # Open modifications file. + open(FILE, "$old_modifications_file"); + + # Read-in file content. + my @file = <FILE>; + + # Close file handle. + close(FILE); + + # Loop through the file content. + foreach my $line (@file) { + chomp($line); + + # Split line and assign to an temporary array. + my @tmp = split(/ /, $line); + + # Assign nice human-readable variables. + my $action = $tmp[0]; + my $sid = $tmp[1]; + + # Process stored rule action and assign to the modifications hash. + if ($action eq "enablesid") { + $modifications{$sid} = "enabled"; + + } elsif ($action eq "disablesid") { + $modifications{$sid} = "disabled"; + } + } + + # Get new filename which will hold the ruleset modifications for this provider. + my $new_modifications_file = &IDS::get_provider_ruleset_modifications_file($provider); + + # Write new modifications file. + &General::writehash("$new_modifications_file", \%modifications); + + # Set correct ownership for the new modifications file. + &IDS::set_ownership("$new_modifications_file"); + + # Delete old modifications file. + unlink("$old_modifications_file"); +} + +# +## Step 5: Convert MONTIOR_TRAFFIC_ONLY setting. +# + +my %ids_settings = (); +my %provider_settings = (); + +&General::readhash("$IDS::ids_settings_file", \%ids_settings); +&General::readhasharray("$IDS::providers_settings_file", \%provider_settings); + +# Default to IPS mode. +my $mode = "IPS"; + +# Check if MONTOR_TRAFFIC_ONLY has been activated. +if(($ids_settings{'MONITOR_TRAFFIC_ONLY'} && $ids_settings{'MONITOR_TRAFFIC_ONLY'} eq "on")) { + $mode = "IDS"; +} + +# Loop through the hash of providers. +foreach my $key (keys %provider_settings) { + # Get and dereference settings array from hash. + my @settings = @{ $provider_settings{$key} }; + + # Add the mode as last element to the settings array. + push(@settings, $mode); + + # Assign the new settings to the hash. + $provider_settings{$key} = [ @settings ]; +} + +# Write back providers settings. +&General::writehasharray("$IDS::providers_settings_file", \%provider_settings); + +# +## Step 6: Regenerate the ruleset. +# +# + +# Call oinkmaster wrapper function. +&IDS::oinkmaster(); + +# +## Step 7: Write new config file for suricata which contains the used rulesfiles. +# + +# Get enabled providers. +my @enabled_providers = &IDS::get_enabled_providers(); + +# Write used rulesfiles file. +&IDS::write_used_rulefiles_file(@enabled_providers); + +# Set the correct ownership for the new file. +&IDS::set_ownership("$IDS::suricata_used_rulesfiles_file"); + +# +## Step 8: Remove unneeded orphaned files. +# + +# Loop through the array of files which are safe to drop. +foreach my $file (@files_to_drop) { + # Remove the file if it exists. + unlink("$file") if (-f "$file"); +} + +# +## Step 9: Start the IDS again, if it was running. +# + +# Check if the IDS is running. +if($start_suricata) { + # Call suricatactrl to perform the start of the IDS. + &IDS::call_suricatactrl("start"); +} diff --git a/config/suricata/suricata-default-rules.yaml b/config/suricata/suricata-default-rules.yaml deleted file mode 100644 index d6c358add..000000000 --- a/config/suricata/suricata-default-rules.yaml +++ /dev/null @@ -1,18 +0,0 @@ -%YAML 1.1 ---- - -# Default rules which helps - - /usr/share/suricata/rules/app-layer-events.rules - - /usr/share/suricata/rules/decoder-events.rules - - /usr/share/suricata/rules/dhcp-events.rules - - /usr/share/suricata/rules/dns-events.rules - - /usr/share/suricata/rules/files.rules - - /usr/share/suricata/rules/http-events.rules - - /usr/share/suricata/rules/ipsec-events.rules - - /usr/share/suricata/rules/kerberos-events.rules - - /usr/share/suricata/rules/nfs-events.rules - - /usr/share/suricata/rules/ntp-events.rules - - /usr/share/suricata/rules/smb-events.rules - - /usr/share/suricata/rules/smtp-events.rules - - /usr/share/suricata/rules/stream-events.rules - - /usr/share/suricata/rules/tls-events.rules diff --git a/config/suricata/suricata.yaml b/config/suricata/suricata.yaml index 6fbc7b3ee..03a7a83af 100644 --- a/config/suricata/suricata.yaml +++ b/config/suricata/suricata.yaml @@ -47,10 +47,7 @@ vars: default-rule-path: /var/lib/suricata rule-files: # Include enabled ruleset files from external file. - include: /var/ipfire/suricata/suricata-used-providers.yaml - - # Include default rules. - include: /var/ipfire/suricata/suricata-default-rules.yaml + include: /var/ipfire/suricata/suricata-used-rulesfiles.yaml classification-file: /usr/share/suricata/classification.config reference-config-file: /usr/share/suricata/reference.config diff --git a/html/cgi-bin/ids.cgi b/html/cgi-bin/ids.cgi index 76c2b99a9..369bf0276 100644 --- a/html/cgi-bin/ids.cgi +++ b/html/cgi-bin/ids.cgi @@ -298,7 +298,7 @@ if ($cgiparams{'RULESET'}) { # Loop through the array of used providers. foreach my $provider (@enabled_providers) { # Gather used rulefiles. - my @used_rulesfiles = &IDS::read_used_provider_rulesfiles($provider); + my @used_rulesfiles = &IDS::get_provider_used_rulesfiles($provider); # Loop through the array of used rulesfiles. foreach my $rulefile (@used_rulesfiles) { @@ -315,36 +315,6 @@ if ($cgiparams{'RULESET'}) { # Save ruleset. if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { - # Arrays to store which rulefiles have been enabled and will be used. - my @enabled_rulefiles; - - # Store if a restart of suricata is required. - my $suricata_restart_required; - - # Loop through the hash of idsrules. - foreach my $rulefile(keys %idsrules) { - # Check if the state of the rulefile has been changed. - unless ($cgiparams{$rulefile} eq $idsrules{$rulefile}{'Rulefile'}{'State'}) { - # A restart of suricata is required to apply the changes of the used rulefiles. - $suricata_restart_required = 1; - } - - # Check if the rulefile is enabled. - if ($cgiparams{$rulefile} eq "on") { - # Add rulefile to the array of enabled rulefiles. - push(@enabled_rulefiles, $rulefile); - - # Drop item from cgiparams hash. - delete $cgiparams{$rulefile}; - } - } - - # Open oinkmaster main include file for provider modifications. - open(OINKM_INCL_FILE, ">", "$IDS::oinkmaster_provider_includes_file") or die "Could not open $IDS::oinkmaster_provider_includes_file. $!\n"; - - # Print file header and notice about autogenerated file. - print OINKM_INCL_FILE "#Autogenerated file. Any custom changes will be overwritten!\n"; - # Get enabled providers. my @enabled_providers = &IDS::get_enabled_providers(); @@ -353,14 +323,17 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Hash to store the used-enabled and disabled sids. my %enabled_disabled_sids; - # Generate modified sids file name for the current processed provider. - my $providers_modified_sids_file = &IDS::get_oinkmaster_provider_modified_sids_file($provider); + # Hash to store the enabled rulefiles for the current processed provider. + my %used_rulefiles; - # Check if a modified sids file for this provider exists. - if (-f $providers_modified_sids_file) { - # Read-in the file for enabled/disabled sids. - %enabled_disabled_sids = &IDS::read_enabled_disabled_sids_file($providers_modified_sids_file); - } + # Get name of the file which holds the ruleset modification of the provider. + my $modifications_file = &IDS::get_provider_ruleset_modifications_file($provider); + + # Get the name of the file which contains the used rulefiles for this provider. + my $used_rulefiles_file = &IDS::get_provider_used_rulesfiles_file($provider); + + # Read-in modifications file, if exists. + &General::readhash("$modifications_file", \%enabled_disabled_sids) if (-f "$modifications_file"); # Loop through the hash of idsrules. foreach my $rulefile (keys %idsrules) { @@ -373,6 +346,15 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Skip the rulefile if the vendor is not our current processed provider. next unless ($rulefile_vendor eq $provider); + # Check if the rulefile is enabled. + if ($cgiparams{$rulefile} eq "on") { + # Add the rulefile to the hash of enabled rulefiles of this provider. + $used_rulefiles{$rulefile} = "enabled"; + + # Drop item from cgiparams hash. + delete $cgiparams{$rulefile}; + } + # Loop through the single rules of the rulefile. foreach my $sid (keys %{$idsrules{$rulefile}}) { # Skip the current sid if it is not numeric. @@ -409,85 +391,24 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Check if the hash for enabled/disabled sids contains any entries. if (%enabled_disabled_sids) { - # Open providers modified sids file for writing. - open(PROVIDER_MOD_FILE, ">$providers_modified_sids_file") or die "Could not write to $providers_modified_sids_file. $!\n"; - - # Write header to the files. - print PROVIDER_MOD_FILE "#Autogenerated file. Any custom changes will be overwritten!\n"; - - # Loop through the hash. - foreach my $sid (keys %enabled_disabled_sids) { - # Check if the sid is enabled. - if ($enabled_disabled_sids{$sid} eq "enabled") { - # Print the sid to the enabled_sids file. - print PROVIDER_MOD_FILE "enablesid $sid\n"; - # Check if the sid is disabled. - } elsif ($enabled_disabled_sids{$sid} eq "disabled") { - # Print the sid to the disabled_sids file. - print PROVIDER_MOD_FILE "disablesid $sid\n"; - # Something strange happende - skip the current sid. - } else { - next; - } - } - - # Close file handle for the providers modified sids file. - close(PROVIDER_MOD_FILE); - - # Add the file to the oinkmasters include file. - print OINKM_INCL_FILE "include $providers_modified_sids_file\n"; + # Write the modifications file. + &General::writehash("$modifications_file", \%enabled_disabled_sids); } - } - - # Close the file handle after writing. - close(OINKM_INCL_FILE); - - # Handle enabled / disabled rulefiles. - # - - # Loop through the array of enabled providers. - foreach my $provider(@enabled_providers) { - # Array to store the rulefiles which belong to the current processed provider. - my @provider_rulefiles = (); - - # Loop through the array of enabled rulefiles. - foreach my $rulesfile (@enabled_rulefiles) { - # Split the rulefile name. - my @filename_parts = split(/-/, "$rulesfile"); - # Assign vendor name for easy processings. - my $vendor = @filename_parts[0]; - - # Check if the rulesvendor is our current processed enabled provider. - if ("$vendor" eq "$provider") { - # Add the rulesfile to the array of provider rulesfiles. - push(@provider_rulefiles, $rulesfile); - } - - # Call function and write the providers used rulesfile file. - &IDS::write_used_provider_rulefiles_file($provider, @provider_rulefiles); - } + # Write the used rulefiles file. + &General::writehash("$used_rulefiles_file", \%used_rulefiles); } # Call function to generate and write the used rulefiles file. - &IDS::write_main_used_rulefiles_file(@enabled_providers); + &IDS::write_used_rulefiles_file(@enabled_providers); # Lock the webpage and print message. - &working_notice("$Lang::tr{'ids apply ruleset changes'}"); - - # Call oinkmaster to alter the ruleset. - &IDS::oinkmaster(); + &oinkmaster_web(); # Check if the IDS is running. if(&IDS::ids_is_running()) { - # Check if a restart of suricata is required. - if ($suricata_restart_required) { - # Call suricatactrl to perform the restart. - &IDS::call_suricatactrl("restart"); - } else { - # Call suricatactrl to perform a reload. - &IDS::call_suricatactrl("reload"); - } + # Call suricatactrl to perform a reload. + &IDS::call_suricatactrl("reload"); } # Reload page. @@ -512,20 +433,34 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { unless ($errormessage) { # Lock the webpage and print notice about downloading # a new ruleset. - &working_notice("$Lang::tr{'ids download new ruleset'}"); + &_open_working_notice("$Lang::tr{'ids download new ruleset'}"); # Call subfunction to download the ruleset. - if(&IDS::downloadruleset($provider)) { - $errormessage = "$provider - $Lang::tr{'could not download latest updates'}"; + my $return = &IDS::downloadruleset($provider); + + # Check if the download function gives a return code. + if ($return) { + # Handle different return codes. + if ($return eq "not modified") { + $errormessage = "$provider - $Lang::tr{'ids ruleset is up to date'}"; + } else { + $errormessage = "$provider - $Lang::tr{'could not download latest updates'}: $return"; + } # Call function to store the errormessage. &IDS::_store_error_message($errormessage); + # Close the working notice. + &_close_working_notice(); + # Preform a reload of the page. &reload(); } else { # Call subfunction to launch oinkmaster. - &IDS::oinkmaster(); + &oinkmaster_web("nolock"); + + # Close the working notice. + &_close_working_notice(); # Check if the IDS is running. if(&IDS::ids_is_running()) { @@ -540,44 +475,46 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Reset a provider to it's defaults. } elsif ($cgiparams{'PROVIDERS'} eq "$Lang::tr{'ids reset provider'}") { + # Get enabled providers. + my @enabled_providers = &IDS::get_enabled_providers(); + # Grab provider handle from cgihash. my $provider = $cgiparams{'PROVIDER'}; # Lock the webpage and print message. &working_notice("$Lang::tr{'ids apply ruleset changes'}"); - # Create new empty file for used rulefiles - # for this provider. - &IDS::write_used_provider_rulefiles_file($provider); + # Get the name of the file which contains the used rulefiles for this provider. + my $used_rulefiles_file = &IDS::get_provider_used_rulesfiles_file($provider); - # Call function to get the path and name for the given providers - # oinkmaster modified sids file. - my $provider_modified_sids_file = &IDS::get_oinkmaster_provider_modified_sids_file($provider); + # Remove the file if it exists. + unlink("$used_rulefiles_file") if (-f "$used_rulefiles_file"); + + # Call function to get the path and name for file which holds the ruleset modifications + # for the given provider. + my $modifications_file = &IDS::get_provider_ruleset_modifications_file($provider); # Check if the file exists. - if (-f $provider_modified_sids_file) { + if (-f $modifications_file) { # Remove the file, as requested. - unlink("$provider_modified_sids_file"); + unlink("$modifications_file"); } - # Alter the oinkmaster provider includes file and remove the provider. - &IDS::alter_oinkmaster_provider_includes_file("remove", $provider); + # Write used rulesfiles file. + &IDS::write_used_rulefiles_file(@enabled_providers); # Regenerate ruleset. - &IDS::oinkmaster(); + &oinkmaster_web(); # Check if the IDS is running. if(&IDS::ids_is_running()) { - # Get enabled providers. - my @enabled_providers = &IDS::get_enabled_providers(); - # Get amount of enabled providers. my $amount = @enabled_providers; # Check if at least one enabled provider remains. if ($amount >= 1) { # Call suricatactrl to perform a reload. - &IDS::call_suricatactrl("restart"); + &IDS::call_suricatactrl("reload"); # Stop suricata if no enabled provider remains. } else { @@ -638,12 +575,6 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { &General::writehash("$IDS::ids_settings_file", \%cgiparams); } - # Check if the the automatic rule update hass been touched. - if($cgiparams{'AUTOUPDATE_INTERVAL'} ne $oldidssettings{'AUTOUPDATE_INTERVAL'}) { - # Call suricatactrl to set the new interval. - &IDS::call_suricatactrl("cron", $cgiparams{'AUTOUPDATE_INTERVAL'}); - } - # Generate file to store the home net. &IDS::generate_home_net_file(); @@ -653,24 +584,6 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Generate file to store the HTTP ports. &IDS::generate_http_ports_file(); - # Write the modify sid's file and pass the taken ruleaction. - &IDS::write_modify_sids_file(); - - # Check if "MONITOR_TRAFFIC_ONLY" has been changed. - if($cgiparams{'MONITOR_TRAFFIC_ONLY'} ne $oldidssettings{'MONITOR_TRAFFIC_ONLY'}) { - # Check if at least one provider is enabled. - if (@enabled_providers) { - # Lock the webpage and print message. - &working_notice("$Lang::tr{'ids working'}"); - - # Call oinkmaster to alter the ruleset. - &IDS::oinkmaster(); - - # Set reload_page to "True". - $reload_page="True"; - } - } - # Check if the IDS currently is running. if(&IDS::ids_is_running()) { # Check if ENABLE_IDS is set to on. @@ -718,7 +631,7 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { } # Modify the status of the existing entry. - $used_providers{$id} = ["$used_providers{$id}[0]", "$used_providers{$id}[1]", "$status_autoupdate", "$used_providers{$id}[3]"]; + $used_providers{$id} = ["$used_providers{$id}[0]", "$used_providers{$id}[1]", "$status_autoupdate", "$used_providers{$id}[3]", "$used_providers{$id}[4]"]; # Write the changed hash to the providers settings file. &General::writehasharray($IDS::providers_settings_file, \%used_providers); @@ -736,6 +649,8 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { my $provider = $cgiparams{'PROVIDER'}; my $subscription_code = $cgiparams{'SUBSCRIPTION_CODE'}; my $status_autoupdate; + my $mode; + my $regenerate_ruleset_required; # Handle autoupdate checkbox. if ($cgiparams{'ENABLE_AUTOUPDATE'} eq "on") { @@ -744,6 +659,13 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { $status_autoupdate = "disabled"; } + # Handle monitor traffic only checkbox. + if ($cgiparams{'MONITOR_TRAFFIC_ONLY'} eq "on") { + $mode = "IDS"; + } else { + $mode = "IPS"; + } + # Check if we are going to add a new provider. if ($cgiparams{'PROVIDERS'} eq "$Lang::tr{'add'}") { # Loop through the hash of used providers. @@ -784,6 +706,15 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Undef the given ID. undef($cgiparams{'ID'}); + # Grab the configured mode. + my $stored_mode = $used_providers{$id}[4]; + + # Check if the ruleset action (mode) has been changed. + if ($stored_mode ne $mode) { + # It has been changed, so the ruleset needs to be regenerated. + $regenerate_ruleset_required = "1"; + } + # Grab the configured status of the corresponding entry. $status = $used_providers{$id}[3]; } else { @@ -806,7 +737,7 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { } # Add/Modify the entry to/in the used providers hash.. - $used_providers{$id} = ["$provider", "$subscription_code", "$status_autoupdate", "$status"]; + $used_providers{$id} = ["$provider", "$subscription_code", "$status_autoupdate", "$status", "$mode"]; # Write the changed hash to the providers settings file. &General::writehasharray($IDS::providers_settings_file, \%used_providers); @@ -830,8 +761,11 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { &working_notice("$Lang::tr{'ids working'}"); # Download the ruleset. - if(&IDS::downloadruleset($provider)) { - $errormessage = "$Lang::tr{'ids could not add provider'} - $Lang::tr{'ids unable to download the ruleset'}"; + my $return = &IDS::downloadruleset($provider); + + # Check if the downloader returned a code. + if ($return) { + $errormessage = "$Lang::tr{'ids could not add provider'} - $Lang::tr{'ids unable to download the ruleset'}: $return"; # Call function to store the errormessage. &IDS::_store_error_message($errormessage); @@ -847,17 +781,24 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Cleanup temporary directory. &IDS::cleanup_tmp_directory(); - - # Create new empty file for used rulefiles - # for this provider. - &IDS::write_used_provider_rulefiles_file($provider); } # Perform a reload of the page. &reload(); + } else { + # Remove the configured provider again. + &remove_provider($id); } } + # Check if the ruleset has to be regenerated. + if ($regenerate_ruleset_required) { + # Call oinkmaster web function. + &oinkmaster_web(); + + # Perform a reload of the page. + &reload(); + } } # Undefine providers flag. @@ -906,7 +847,7 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { } # Modify the status of the existing entry. - $used_providers{$id} = ["$used_providers{$id}[0]", "$used_providers{$id}[1]", "$used_providers{$id}[2]", "$status"]; + $used_providers{$id} = ["$used_providers{$id}[0]", "$used_providers{$id}[1]", "$used_providers{$id}[2]", "$status", "$used_providers{$id}[4]"]; # Write the changed hash to the providers settings file. &General::writehasharray($IDS::providers_settings_file, \%used_providers); @@ -915,19 +856,12 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { my @enabled_providers = &IDS::get_enabled_providers(); # Write the main providers include file. - &IDS::write_main_used_rulefiles_file(@enabled_providers); - - # Call function to alter the oinkmasters provider includes file and - # add or remove the provider. - &IDS::alter_oinkmaster_provider_includes_file($provider_includes_action, $provider_handle); + &IDS::write_used_rulefiles_file(@enabled_providers); # Check if oinkmaster has to be executed. if ($oinkmaster eq "True") { - # Lock the webpage and print message. - &working_notice("$Lang::tr{'ids apply ruleset changes'}"); - # Launch oinkmaster. - &IDS::oinkmaster(); + &oinkmaster_web(); } # Check if the IDS is running. @@ -969,39 +903,36 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'ids apply'}) { # Undef the given ID. undef($cgiparams{'ID'}); - # Lock the webpage and print message. - &working_notice("$Lang::tr{'ids apply ruleset changes'}"); - # Drop the stored ruleset file. &IDS::drop_dl_rulesfile($provider); + # Remove may stored etag data. + &IDS::remove_from_etags($provider); + # Get the name of the provider rulessets include file. - my $provider_used_rulefile = &IDS::get_used_provider_rulesfile_file($provider); + my $provider_used_rulefile = &IDS::get_provider_used_rulesfiles_file($provider); # Drop the file, it is not longer needed. unlink("$provider_used_rulefile"); # Call function to get the path and name for the given providers - # oinkmaster modified sids file. - my $provider_modified_sids_file = &IDS::get_oinkmaster_provider_modified_sids_file($provider); + # ruleset modifications file.. + my $modifications_file = &IDS::get_provider_ruleset_modifications_file($provider); # Check if the file exists. - if (-f $provider_modified_sids_file) { + if (-f $modifications_file) { # Remove the file, which is not longer needed. - unlink("$provider_modified_sids_file"); + unlink("$modifications_file"); } - # Alter the oinkmaster provider includes file and remove the provider. - &IDS::alter_oinkmaster_provider_includes_file("remove", $provider); - # Regenerate ruleset. - &IDS::oinkmaster(); + &oinkmaster_web(); # Gather all enabled providers. my @enabled_providers = &IDS::get_enabled_providers(); # Regenerate main providers include file. - &IDS::write_main_used_rulefiles_file(@enabled_providers); + &IDS::write_used_rulefiles_file(@enabled_providers); # Check if the IDS is running. if(&IDS::ids_is_running()) { @@ -1064,25 +995,12 @@ sub show_mainpage() { &General::readhash("$IDS::ids_settings_file", \%idssettings); &General::readhasharray("$IDS::providers_settings_file", \%used_providers); - # If no autoupdate intervall has been configured yet, set default value. - unless(exists($idssettings{'AUTOUPDATE_INTERVAL'})) { - # Set default to "weekly". - $idssettings{'AUTOUPDATE_INTERVAL'} = 'weekly'; - } - # Read-in ignored hosts. &General::readhasharray("$IDS::ignored_file", \%ignored) if (-e $IDS::ignored_file); $checked{'ENABLE_IDS'}{'off'} = ''; $checked{'ENABLE_IDS'}{'on'} = ''; $checked{'ENABLE_IDS'}{$idssettings{'ENABLE_IDS'}} = "checked='checked'"; - $checked{'MONITOR_TRAFFIC_ONLY'}{'off'} = ''; - $checked{'MONITOR_TRAFFIC_ONLY'}{'on'} = ''; - $checked{'MONITOR_TRAFFIC_ONLY'}{$idssettings{'MONITOR_TRAFFIC_ONLY'}} = "checked='checked'"; - $selected{'AUTOUPDATE_INTERVAL'}{'off'} = ''; - $selected{'AUTOUPDATE_INTERVAL'}{'daily'} = ''; - $selected{'AUTOUPDATE_INTERVAL'}{'weekly'} = ''; - $selected{'AUTOUPDATE_INTERVAL'}{$idssettings{'AUTOUPDATE_INTERVAL'}} = "selected='selected'"; # Draw current state of the IDS &Header::openbox('100%', 'left', $Lang::tr{'intrusion detection system'}); @@ -1149,8 +1067,6 @@ print <<END <input type='checkbox' name='ENABLE_IDS' $checked{'ENABLE_IDS'}{'on'}> $Lang::tr{'ids enable'} </td> - <td class='base' colspan='2'> - <input type='checkbox' name='MONITOR_TRAFFIC_ONLY' $checked{'MONITOR_TRAFFIC_ONLY'}{'on'}> $Lang::tr{'ids monitor traffic only'} </td> </tr> @@ -1198,27 +1114,6 @@ END print <<END </tr> - - <tr> - <td><br><br></td> - <td><br><br></td> - <td><br><br></td> - <td><br><br></td> - </tr> - - <tr> - <td colspan='4'><b>$Lang::tr{'ids automatic rules update'}</b></td> - </tr> - - <tr> - <td> - <select name='AUTOUPDATE_INTERVAL'> - <option value='off' $selected{'AUTOUPDATE_INTERVAL'}{'off'} >- $Lang::tr{'Disabled'} -</option> - <option value='daily' $selected{'AUTOUPDATE_INTERVAL'}{'daily'} >$Lang::tr{'Daily'}</option> - <option value='weekly' $selected{'AUTOUPDATE_INTERVAL'}{'weekly'} >$Lang::tr{'Weekly'}</option> - </select> - </td> - </tr> </table> <br><br> @@ -1275,6 +1170,16 @@ END $col="bgcolor='$color{'color20'}'"; } + # Handle providers which are not longer supported. + unless ($provider_name) { + # Set the provider name to the provider handle + # to display something helpful. + $provider_name = $provider; + + # Assign background color + $col="bgcolor='#FF4D4D'"; + } + # Choose icons for the checkboxes. my $status_gif; my $status_gdesc; @@ -1745,6 +1650,12 @@ END $checked{'ENABLE_AUTOUPDATE'} = "checked='checked'"; } + # Check if the monitor traffic only mode is set for this provider. + if ($used_providers{$cgiparams{'ID'}}[4] eq "IDS") { + # Set the checkbox to be checked. + $checked{'MONITOR_TRAFFIC_ONLY'} = "checked='checked'"; + } + # Display section to force an rules update and to reset the provider. &show_additional_provider_actions(); @@ -1842,9 +1753,13 @@ print <<END </tr> <tr> - <td colspan='2'> + <td> <input type='checkbox' name='ENABLE_AUTOUPDATE' $checked{'ENABLE_AUTOUPDATE'}> $Lang::tr{'ids enable automatic updates'} </td> + + <td> + <input type='checkbox' name='MONITOR_TRAFFIC_ONLY' $checked{'MONITOR_TRAFFIC_ONLY'}> $Lang::tr{'ids monitor traffic only'} + </td> </tr> <tr> @@ -1874,7 +1789,8 @@ END ## Function to show the area where additional provider actions can be done. # sub show_additional_provider_actions() { - my $disabled; + my $disabled_reset; + my $disabled_update; my %used_providers = (); # Read-in providers settings file. @@ -1883,13 +1799,18 @@ sub show_additional_provider_actions() { # Assign variable for provider handle. my $provider = "$used_providers{$cgiparams{'ID'}}[0]"; - # Call function to get the path and name for the given providers - # oinkmaster modified sids file. - my $provider_modified_sids_file = &IDS::get_oinkmaster_provider_modified_sids_file($provider); + # Call function to get the path and name for the given provider + # ruleset modifications file. + my $modifications_file = &IDS::get_provider_ruleset_modifications_file($provider); # Disable the reset provider button if no provider modified sids file exists. - unless (-f $provider_modified_sids_file) { - $disabled = "disabled"; + unless (-f $modifications_file) { + $disabled_reset = "disabled"; + } + + # Disable the manual update button if the provider is not longer supported. + unless ($IDS::Ruleset::Providers{$provider}) { + $disabled_update = "disabled"; } &Header::openbox('100%', 'center', ""); @@ -1899,8 +1820,8 @@ sub show_additional_provider_actions() { <tr> <td align='center'> <input type='hidden' name='PROVIDER' value='$provider'> - <input type='submit' name='PROVIDERS' value='$Lang::tr{'ids reset provider'}' $disabled> - <input type='submit' name='PROVIDERS' value='$Lang::tr{'ids force ruleset update'}'> + <input type='submit' name='PROVIDERS' value='$Lang::tr{'ids reset provider'}' $disabled_reset> + <input type='submit' name='PROVIDERS' value='$Lang::tr{'ids force ruleset update'}' $disabled_update> </td> </tr> </table> @@ -1917,6 +1838,16 @@ END sub working_notice ($) { my ($message) = @_; + &_open_working_notice ($message); + &_close_working_notice(); +} + +# +## Private function to lock the page and tell the user what is going on. +# +sub _open_working_notice ($) { + my ($message) = @_; + &Header::openpage($Lang::tr{'intrusion detection system'}, 1, ''); &Header::openbigbox('100%', 'left', '', $errormessage); &Header::openbox( 'Waiting', 1,); @@ -1926,13 +1857,84 @@ sub working_notice ($) { <td><img src='/images/indicator.gif' alt='$Lang::tr{'aktiv'}' /></td> <td>$message</td> </tr> - </table> END +} + +# +## Private function to close a working notice. +# +sub _close_working_notice () { + print "</table>\n"; + &Header::closebox(); &Header::closebigbox(); &Header::closepage(); } +# +## Function which locks the webpage and basically does the same as the +## oinkmaster function, but provides a lot of HTML formated status output. +# +sub oinkmaster_web () { + my ($nolock) = @_; + + my @enabled_providers = &IDS::get_enabled_providers(); + + # Lock the webpage and print message. + unless ($nolock) { + &_open_working_notice("$Lang::tr{'ids apply ruleset changes'}"); + } + + # Check if the files in rulesdir have the correct permissions. + &IDS::_check_rulesdir_permissions(); + + print "<tr><td><br><br></td></tr>\n"; + + # Cleanup the rules directory before filling it with the new rulests. + &_add_to_notice("$Lang::tr{'ids remove rule structures'}"); + &IDS::_cleanup_rulesdir(); + + # Loop through the array of enabled providers. + foreach my $provider (@enabled_providers) { + &_add_to_notice("$Lang::tr{'ids extract ruleset'} $provider"); + # Call the extractruleset function. + &IDS::extractruleset($provider); + } + + # Call function to process the ruleset and do all modifications. + &_add_to_notice("$Lang::tr{'ids adjust ruleset'}"); + &IDS::process_ruleset(@enabled_providers); + + # Call function to merge the classification files. + &_add_to_notice("$Lang::tr{'ids merge classifications'}"); + &IDS::merge_classifications(@enabled_providers); + + # Call function to merge the sid to message mapping files. + &_add_to_notice("$Lang::tr{'ids merge sid files'}"); + &IDS::merge_sid_msg(@enabled_providers); + + # Cleanup temporary directory. + &_add_to_notice("$Lang::tr{'ids cleanup tmp dir'}"); + &IDS::cleanup_tmp_directory(); + + # Finished - print a notice. + &_add_to_notice("$Lang::tr{'ids finished'}"); + + # Close the working notice. + unless ($nolock) { + &_close_working_notice(); + } +} + +# +## Tiny private function to add a given message to a notice table. +# +sub _add_to_notice ($) { + my ($message) = @_; + + print "<tr><td colspan='2'><li><b>$message</b></li></td></tr>\n"; +} + # ## A tiny function to perform a reload of the webpage after one second. # @@ -2060,6 +2062,9 @@ sub get_provider_name($) { my ($handle) = @_; my $provider_name; + # Early exit if the given provider does not longer exist. + return unless ($IDS::Ruleset::Providers{$handle}); + # Get the required translation string for the given provider handle. my $tr_string = $IDS::Ruleset::Providers{$handle}{'tr_string'}; diff --git a/langs/de/cgi-bin/de.pl b/langs/de/cgi-bin/de.pl index afd833e70..a841b39f9 100644 --- a/langs/de/cgi-bin/de.pl +++ b/langs/de/cgi-bin/de.pl @@ -1378,21 +1378,27 @@ 'idle timeout' => 'Leerlaufwartezeit in Minuten (0 zum Deaktivieren):', 'idle timeout not set' => 'Leerlaufwartezeit nicht angegeben.', 'ids add provider' => 'Provider hinzufügen', +'ids adjust ruleset' => 'Regelset anpassen und Benutzermodifikationen übernehmen...', 'ids apply' => 'Übernehmen', 'ids apply ruleset changes' => 'Regeländerungen werden übernommen. Bitte warten Sie, bis dieser Vorgang erfolgreich beendet wurde...', 'ids automatic rules update' => 'Automatische Regelaktualisierung', +'ids cleanup tmp dir' => 'Temporäres Verzeichnis aufräumen...', 'ids autoupdates' => 'Automatische Updates', 'ids could not add provider' => 'Provider konnte nicht hinzugefügt werden', 'ids customize ruleset' => 'Regelset anpassen', 'ids download new ruleset' => 'Das neue Regelset wird heruntergeladen und entpackt. Bitte warten Sie, bis dieser Vorgang erfolgreich beendet wurde...', 'ids enable' => 'Einbruchsverhinderungssystem aktivieren', 'ids enable automatic updates' => 'Automatische Updates aktivieren', +'ids extract ruleset' => 'Entpacke Regelset von:', +'ids finished' => 'Fertig...', 'ids force ruleset update' => 'Regelset jetzt aktualisieren', 'ids hide' => 'Verstecken', 'ids ignored hosts' => 'Ausnahmeliste', 'ids log hits' => 'Gesamtanzahl der Regeltreffer für', 'ids log viewer' => 'Protokoll des Einbruchsverhinderungssystems', 'ids logs' => 'IPS-Protokolldateien', +'ids merge classifications' => 'Klassifizierungen zusammenführen...', +'ids merge sid files' => 'Sid-to-message Dateien zusammenführen...', 'ids monitor traffic only' => 'Netzwerkpakete nur überprüfen (nicht verwerfen)', 'ids monitored interfaces' => 'Überwachte Netzwerkzonen', 'ids no enabled ruleset provider' => 'Es ist kein aktivierter Provider verfügbar. Bitte aktivieren Sie einen oder fügen Sie einen Provider hinzu.', @@ -1400,9 +1406,11 @@ 'ids oinkcode required' => 'Für den ausgewählten Regelsatz wird ein Abonnement oder ein Oinkcode benötigt', 'ids provider' => 'Regelset-Anbieter', 'ids provider settings' => 'Regelset-Anbieter-Einstellungen', +'ids remove rule structures' => 'Entferne alte Regelstrukturen...', 'ids reset provider' => 'Providereinstellungen zurücksetzen', 'ids rules update' => 'Regelsatz', 'ids ruleset autoupdate in progress' => 'Der Regelsatz wird gerade aktualisiert. Bitte warten Sie, bis dieser Vorgang erfolgreich beendet wurde...', +'ids ruleset is up to date' => 'Regelset ist aktuell - Keine Aktualisierung notwendig.', 'ids ruleset settings' => 'Regelsatzeinstellungen', 'ids show' => 'Anzeigen', 'ids the choosen provider is already in use' => 'Der gewhählte Provider wird bereits verwendet.', diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl index fdea0fdf2..e30ee4f69 100644 --- a/langs/en/cgi-bin/en.pl +++ b/langs/en/cgi-bin/en.pl @@ -1422,30 +1422,38 @@ 'idle timeout' => 'Idle timeout (mins; 0 to disable):', 'idle timeout not set' => 'Idle timeout not set.', 'ids add provider' => 'Add provider', +'ids adjust ruleset' => 'Adjust rules and add user defined customizations...', 'ids apply' => 'Apply', 'ids apply ruleset changes' => 'The ruleset changes are being applied. Please wait until all operations have completed successfully...', 'ids automatic rules update' => 'Automatic Rule Update', 'ids autoupdates' => 'Automatic updates', +'ids cleanup tmp dir' => 'Cleanup temporary directory...', 'ids could not add provider' => 'Could not add provider', 'ids customize ruleset' => 'Customize ruleset', 'ids download new ruleset' => 'Downloading and unpacking new ruleset. Please wait until all operations have completed successfully...', 'ids enable' => 'Enable Intrusion Prevention System', 'ids enable automatic updates' => 'Enable automatic updates', +'ids extract ruleset' => 'Extracting ruleset for provider:', +'ids finished' => 'Finished...', 'ids force ruleset update' => 'Force ruleset update', 'ids hide' => 'Hide', 'ids ignored hosts' => 'Whitelisted Hosts', 'ids log hits' => 'Total of number of activated rules for', 'ids log viewer' => 'IPS Log Viewer', 'ids logs' => 'IPS Logs', +'ids merge classifications' => 'Merging classifications...', +'ids merge sid files' => 'Merging sid to message files...', 'ids monitor traffic only' => 'Monitor traffic only', 'ids monitored interfaces' => 'Monitored Interfaces', 'ids no enabled ruleset provider' => 'No enabled ruleset is available. Please activate or add one first.', 'ids no network zone' => 'Please select at least one network zone to be monitored', 'ids provider' => 'Provider', 'ids provider settings' => 'Provider settings', +'ids remove rule structures' => 'Remove old rule structures...', 'ids reset provider' => 'Reset provider', 'ids rules update' => 'Ruleset', 'ids ruleset autoupdate in progress' => 'Ruleset update in progress. Please wait until all operations have completed successfully...', +'ids ruleset is up to date' => 'No update required - The ruleset is up to date.', 'ids ruleset settings' => 'Ruleset Settings', 'ids show' => 'Show', 'ids subscription code required' => 'The selected ruleset requires a subscription code', diff --git a/lfs/oinkmaster b/lfs/oinkmaster deleted file mode 100644 index 1b437c0cd..000000000 --- a/lfs/oinkmaster +++ /dev/null @@ -1,79 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see <http://www.gnu.org/licenses/>. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 2.0 -THISAPP = oinkmaster-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_BLAKE2 = f5c096b8f03a5952670c6942dc1020bd6b37bf8ec897a975671e20ec4099b54851f61320a695d2562c56981861f5096a739d06baad5e5c9b7c62585d21b2a189 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -b2 : $(subst %,%_BLAKE2,$(objects)) - -############################################################################### -# Downloading, checking, b2sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_BLAKE2,$(objects)) : - @$(B2SUM) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/oinkmaster-2.0-add_community_rules.patch - cd $(DIR_APP) && chown nobody:nobody oinkmaster.pl - cd $(DIR_APP) && install -m 0644 $(DIR_SRC)/config/oinkmaster/oinkmaster.conf \ - /var/ipfire/suricata/ - cd /var/ipfire/suricata && patch -Np1 < $(DIR_SRC)/src/patches/oinkmaster-tmp.patch - cd $(DIR_APP) && install -m 0755 oinkmaster.pl /usr/local/bin/ - @rm -rf $(DIR_APP) - @$(POSTBUILD) diff --git a/lfs/suricata b/lfs/suricata index 4a9dcdb1d..fa7791cbe 100644 --- a/lfs/suricata +++ b/lfs/suricata @@ -98,15 +98,12 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) # Install IPFire related config file. install -m 0644 $(DIR_SRC)/config/suricata/suricata.yaml /etc/suricata - # Install yaml file for loading default rules. - install -m 0664 $(DIR_SRC)/config/suricata/suricata-default-rules.yaml /var/ipfire/suricata - - # Set correct ownership for the default rules file. - chown nobody:nobody /var/ipfire/suricata/suricata-default-rules.yaml - # Create emtpy rules directory. -mkdir -p /var/lib/suricata + # Create empty cache directory. + -mkdir -p /var/cache/suricata + # Move config files for references, threshold and classification # to the rules directory. rm -rfv /etc/suricata/*.config @@ -115,10 +112,19 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) # (File has to be writeable for the nobody user) chown nobody:nobody /usr/share/suricata/classification.config + # Create empty threshold config file. + touch /usr/share/suricata/threshold.config + + # Set correct ownership for the threshold.config file. + chown nobody:nobody /usr/share/suricata/threshold.config + # Set correct ownership for /var/lib/suricata and the # contained files chown -R nobody:nobody /var/lib/suricata + # Set correct ownership for the cache directory. + chown nobody:nobody /var/cache/suricata + # Create logging directory. -mkdir -p /var/log/suricata diff --git a/make.sh b/make.sh index d46d2a6c0..d96d4db2a 100755 --- a/make.sh +++ b/make.sh @@ -1444,7 +1444,6 @@ buildipfire() { lfsmake2 ragel lfsmake2 hyperscan lfsmake2 suricata - lfsmake2 oinkmaster lfsmake2 ids-ruleset-sources lfsmake2 squid lfsmake2 squidguard diff --git a/src/scripts/update-ids-ruleset b/src/scripts/update-ids-ruleset index 8c5fd37a1..e9a082e62 100644 --- a/src/scripts/update-ids-ruleset +++ b/src/scripts/update-ids-ruleset @@ -26,9 +26,18 @@ require '/var/ipfire/general-functions.pl'; require "${General::swroot}/ids-functions.pl"; require "${General::swroot}/lang.pl"; +# Import ruleset providers file. +require "$IDS::rulesetsourcesfile"; + +# Load perl module to talk to the kernel syslog. +use Sys::Syslog qw(:DEFAULT setlogsock); + # Variable to store if the process has written a lockfile. my $locked; +# Array to store the updated providers. +my @updated_providers = (); + # Hash to store the configured providers. my %providers = (); @@ -45,12 +54,15 @@ if ( $> == 0 ) { POSIX::setuid( $uid ); } +# Establish the connection to the syslog service. +openlog('oinkmaster', 'cons,pid', 'user'); + # Check if the IDS lock file exists. # In this case the WUI or another instance currently is altering the # ruleset. if (-f "$IDS::ids_page_lock_file") { # Store notice to the syslog. - &IDS::_log_to_syslog("Another process currently is altering the IDS ruleset."); + &_log_to_syslog("<INFO> Autoupdate skipped - Another process was altering the IDS ruleset."); # Exit. exit 0; @@ -59,19 +71,19 @@ if (-f "$IDS::ids_page_lock_file") { # Check if the red device is active. unless (-e "${General::swroot}/red/active") { # Store notice in the syslog. - &IDS::_log_to_syslog("The system is offline."); - - # Store error message for displaying in the WUI. - &IDS::_store_error_message("$Lang::tr{'could not download latest updates'} - $Lang::tr{'system is offline'}"); + &_log_to_syslog("<ERROR> Could not update any ruleset - The system is offline."); # Exit. exit 0; } # Check if enought free disk space is availabe. -if(&IDS::checkdiskspace()) { - # Store the error message for displaying in the WUI. - &IDS::_store_error_message("$Lang::tr{'not enough disk space'}"); +my $return = &IDS::checkdiskspace(); + +# Handle error. +if ($return) { + # Store error in syslog. + &_log_to_syslog("<ERROR> Not enough free disk space, only $return of 300MB are available."); # Exit. exit 0; @@ -90,45 +102,87 @@ $locked = "1"; foreach my $id (keys %providers) { # Assign some nice variabled. my $provider = $providers{$id}[0]; + my $enabled_status = $providers{$id}[2]; my $autoupdate_status = $providers{$id}[3]; + # Skip unsupported providers. + next unless($IDS::Ruleset::Providers{$provider}); + + # Skip the provider if it is not enabled. + next unless($enabled_status eq "enabled"); + # Skip the provider if autoupdate is not enabled. next unless($autoupdate_status eq "enabled"); - # Call the download function and gather the new ruleset for the current processed provider. - if(&IDS::downloadruleset($provider)) { - # Store error message for displaying in the WUI. - &IDS::_store_error_message("$provider: $Lang::tr{'could not download latest updates'}"); + # Log notice about update. + &_log_to_syslog("<INFO> Performing update for $provider."); - # Unlock the IDS page. - &IDS::unlock_ids_page(); - - # Exit. - exit 0; + # Call the download function and gather the new ruleset for the current processed provider. + my $return = &IDS::downloadruleset($provider); + + # Check if we got a return code. + if ($return) { + # Handle different return codes. + if ($return eq "not modified") { + # Log notice to syslog. + &_log_to_syslog("<INFO> Skipping $provider - The ruleset is up-to-date"); + + } elsif ($return eq "no url") { + # Log error to the syslog. + &_log_to_syslog("<ERROR> Could not determine a download URL for $provider."); + + } else { + # Log error to syslog. + &_log_to_syslog("<ERROR> $return"); + } + } else { + # Log successfull update. + &_log_to_syslog("<INFO> Successfully updated ruleset for $provider."); + + # Get path and name of the stored rules file or archive. + my $stored_file = &IDS::_get_dl_rulesfile($provider); + + # Set correct ownership for the downloaded tarball. + &IDS::set_ownership("$stored_file"); + + # Add the provider handle to the array of updated providers. + push(@updated_providers, $provider); } +} + +# Check if at least one provider has been updated successfully. +if (@updated_providers) { + # Call oinkmaster to alter the ruleset. + &IDS::oinkmaster(); - # Get path and name of the stored rules file or archive. - my $stored_file = &IDS::_get_dl_rulesfile($provider); + # Set correct ownership for the rulesdir and files. + &IDS::set_ownership("$IDS::rulespath"); - # Set correct ownership for the downloaded tarball. - &IDS::set_ownership("$stored_file"); + # Check if the IDS is running. + if(&IDS::ids_is_running()) { + # Call suricatactrl to perform a reload. + &IDS::call_suricatactrl("reload"); + } } -# Call oinkmaster to alter the ruleset. -&IDS::oinkmaster(); +# +# Tiny function to sent the error message to the syslog. +# +sub _log_to_syslog($) { + my ($message) = @_; -# Set correct ownership for the rulesdir and files. -&IDS::set_ownership("$IDS::rulespath"); + # The syslog function works best with an array based input, + # so generate one before passing the message details to syslog. + my @syslog = ("ERR", "$message"); -# Check if the IDS is running. -if(&IDS::ids_is_running()) { - # Call suricatactrl to perform a reload. - &IDS::call_suricatactrl("reload"); + # Send the log message. + syslog(@syslog); } -# Custom END declaration to release a IDS page lock -# when the script has created one. END { + # Close connection to syslog. + closelog(); + # Check if a lock has been requested. if ($locked) { # Unlock the IDS page. hooks/post-receive -- IPFire 2.x development tree

1 0

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. e47f7c8295ef92b6ee40ce88154d4449c4b29f19
by Peter Müller 05 May '22

05 May '22

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree". The branch, next has been updated via e47f7c8295ef92b6ee40ce88154d4449c4b29f19 (commit) via c78f6e33f8415bdefb5be953032eba111d3585ff (commit) via 6f3da00c53ac58dcbb833740b7a6f069166ee98f (commit) via 401a2f3db0303e404987d06890296f23966c8ae8 (commit) from c36610e051b931b4ae497b633ca41713e03d53e7 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit e47f7c8295ef92b6ee40ce88154d4449c4b29f19 Author: Peter Müller <peter.mueller(a)ipfire.org> Date: Thu May 5 15:31:16 2022 +0000 Core Update 168: Ship freetype Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> commit c78f6e33f8415bdefb5be953032eba111d3585ff Author: Adolf Belka <adolf.belka(a)ipfire.org> Date: Wed May 4 21:51:00 2022 +0200 freetype: Update to version 2.12.1 - Update from version 2.11.1 to 2.12.1 - Update of rootfile - Changelog CHANGES BETWEEN 2.12.0 and 2.12.1 I. IMPORTANT BUG FIXES - Loading CFF fonts sometimes made FreeType crash (bug introduced in version 2.12.0) - Loading a fully hinted TrueType glyph a second time (without caching) sometimes yielded different rendering results if TrueType hinting was active (bug introduced in version 2.12.0). - The generation of the pkg-config file `freetype2.pc` was broken if the build was done with cmake (bug introduced in version 2.12.0). II. MISCELLANEOUS - New option `--with-librsvg` for the `configure` script for better FreeType demo support. - The meson build no longer enforces both static and dynamic versions of the library by default. - The internal zlib library was updated to version 1.2.12. Note, however, that FreeType is *not* affected by CVE-2018-25032 since it only does decompression. CHANGES BETWEEN 2.11.1 and 2.12.0 I. IMPORTANT CHANGES - FreeType now handles OT-SVG fonts, to be controlled with `FT_CONFIG_OPTION_SVG` configuration macro. By default, it can only load the 'SVG ' table of an OpenType font. However, by using the `svg-hooks` property of the new 'ot-svg' module it is possible to register an external SVG rendering engine. The FreeType demo programs have been set up to use 'librsvg' as the rendering library. This work was Moazin Khatti's GSoC 2019 project. II. MISCELLANEOUS - The handling of fonts with an 'sbix' table has been improved. - Corrected bitmap offsets. - A new tag `FT_PARAM_TAG_IGNORE_SBIX` for `FT_Open_Face` makes FreeType ignore an 'sbix' table in a font, allowing applications to access the font's outline glyphs. - `FT_FACE_FLAG_SBIX` and `FT_FACE_FLAG_SBIX_OVERLAY` together with their corresponding preprocessor macros `FT_HAS_SBIX` and `FT_HAS_SBIX_OVERLAY` enable applications to treat 'sbix' tables as described in the OpenType specification. - The internal 'zlib' code has been updated to be in sync with the current 'zlib' version (1.2.11). - The previously internal load flag `FT_LOAD_SBITS_ONLY` is now public. - Some minor improvements of the building systems, in particular handling of the 'zlib' library (internal vs. external). - Support for non-desktop Universal Windows Platform. - Various other minor bug and documentation fixes. - The `ftdump` demo program shows more information for Type1 fonts if option `-n` is given. - `ftgrid` can now display embedded bitmap strikes. Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org> commit 6f3da00c53ac58dcbb833740b7a6f069166ee98f Author: Adolf Belka <adolf.belka(a)ipfire.org> Date: Wed May 4 21:51:28 2022 +0200 sdl2: Update to version 2.0.22 - Update from version 2.0.20 to 2.0.22 - Update of rootfile - Changelog 2.0.22: General: * Added SDL_RenderGetWindow() to get the window associated with a renderer * Added floating point rectangle functions: * SDL_PointInFRect() * SDL_FRectEmpty() * SDL_FRectEquals() * SDL_FRectEqualsEpsilon() * SDL_HasIntersectionF() * SDL_IntersectFRect() * SDL_UnionFRect() * SDL_EncloseFPoints() * SDL_IntersectFRectAndLine() * Added SDL_IsTextInputShown() which returns whether the IME window is currently shown * Added SDL_ClearComposition() to dismiss the composition window without disabling IME input * Added SDL_TEXTEDITING_EXT event for handling long composition text, and a hint SDL_HINT_IME_SUPPORT_EXTENDED_TEXT to enable it * Added the hint SDL_HINT_MOUSE_RELATIVE_MODE_CENTER to control whether the mouse should be constrained to the whole window or the center of the window when relative mode is enabled * The mouse is now automatically captured when mouse buttons are pressed, and the hint SDL_HINT_MOUSE_AUTO_CAPTURE allows you to control this behavior * Added the hint SDL_HINT_VIDEO_FOREIGN_WINDOW_OPENGL to let SDL know that a foreign window will be used with OpenGL * Added the hint SDL_HINT_VIDEO_FOREIGN_WINDOW_VULKAN to let SDL know that a foreign window will be used with Vulkan * Added the hint SDL_HINT_QUIT_ON_LAST_WINDOW_CLOSE to specify whether an SDL_QUIT event will be delivered when the last application window is closed * Added the hint SDL_HINT_JOYSTICK_ROG_CHAKRAM to control whether ROG Chakram mice show up as joysticks Windows: * Added support for SDL_BLENDOPERATION_MINIMUM and SDL_BLENDOPERATION_MAXIMUM to the D3D9 renderer Linux: * Compiling with Wayland support requires libwayland-client version 1.18.0 or later * Added the hint SDL_HINT_X11_WINDOW_TYPE to specify the _NET_WM_WINDOW_TYPE of SDL windows * Added the hint SDL_HINT_VIDEO_WAYLAND_PREFER_LIBDECOR to allow using libdecor with compositors that support xdg-decoration Android: * Added SDL_AndroidSendMessage() to send a custom command to the SDL java activity Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org> commit 401a2f3db0303e404987d06890296f23966c8ae8 Author: Adolf Belka <adolf.belka(a)ipfire.org> Date: Wed May 4 21:51:15 2022 +0200 hplip: Update to version 3.22.4 - Update from version 3.22.2 to 3.22.4 - Update of rootfile - Changelog HPLIP 3.22.4 - This release has the following changes: Added support for following new Distro's: Manjaro 21.2 Added support for the following new Printers: HP LaserJet Pro 4001ne HP LaserJet Pro 4001n HP LaserJet Pro 4001dne HP LaserJet Pro 4001dn HP LaserJet Pro 4001dwe HP LaserJet Pro 4001dw HP LaserJet Pro 4001d HP LaserJet Pro 4001de HP LaserJet Pro 4002ne HP LaserJet Pro 4002n HP LaserJet Pro 4002dne HP LaserJet Pro 4002dn HP LaserJet Pro 4002dwe HP LaserJet Pro 4002dw HP LaserJet Pro 4002d HP LaserJet Pro 4002de HP LaserJet Pro 4003dn HP LaserJet Pro 4003dw HP LaserJet Pro 4003n HP LaserJet Pro 4003d HP LaserJet Pro 4004d HP LaserJet Pro 4004dn HP LaserJet Pro 4004dw HP LaserJet Pro MFP 4101dwe HP LaserJet Pro MFP 4101dw HP LaserJet Pro MFP 4101fdn HP LaserJet Pro MFP 4101fdne HP LaserJet Pro MFP 4101fdw HP LaserJet Pro MFP 4101fdwe HP LaserJet Pro MFP 4102dwe HP LaserJet Pro MFP 4102dw HP LaserJet Pro MFP 4102fdn HP LaserJet Pro MFP 4102fdw HP LaserJet Pro MFP 4102fdwe HP LaserJet Pro MFP 4102fdne HP LaserJet Pro MFP 4102fnw HP LaserJet Pro MFP 4102fnwe HP LaserJet Pro MFP 4103dw HP LaserJet Pro MFP 4103dn HP LaserJet Pro MFP 4103fdn HP LaserJet Pro MFP 4103fdw HP LaserJet Pro MFP 4104dw HP LaserJet Pro MFP 4104fdw HP LaserJet Pro MFP 4104fdn HP ScanJet Pro 3600 f1 HP ScanJet Pro N4600 fnw1 HP ScanJet Pro 2600 f1 HP ScanJet Enterprise Flow N6600 fnw1 HPLIP 3.22.2 - This release has the following changes: Added support for following new Distro's: Elementary OS 6.1 RHEL 8.5 Linux Mint 20.3 Added support for the following new Printers: HP LaserJet Tank MFP 1602a HP LaserJet Tank MFP 1602w HP LaserJet Tank MFP 1604w HP LaserJet Tank MFP 2602dn HP LaserJet Tank MFP 2602sdn HP LaserJet Tank MFP 2602sdw HP LaserJet Tank MFP 2602dw HP LaserJet Tank MFP 2604dw HP LaserJet Tank MFP 2604sdw HP LaserJet Tank MFP 2603dw HP LaserJet Tank MFP 2603sdw HP LaserJet Tank MFP 2605sdw HP LaserJet Tank MFP 2606dn HP LaserJet Tank MFP 2606sdn HP LaserJet Tank MFP 2606sdw HP LaserJet Tank MFP 2606dw HP LaserJet Tank MFP 2606dc HP LaserJet Tank MFP 1005 HP LaserJet Tank MFP 1005w HP LaserJet Tank MFP 1005nw HP LaserJet Tank 1502a HP LaserJet Tank 1502w HP LaserJet Tank 1504w HP LaserJet Tank 2502dw HP LaserJet Tank 2502dn HP LaserJet Tank 2504dw HP LaserJet Tank 2503dw HP LaserJet Tank 2506dw HP LaserJet Tank 2506d HP LaserJet Tank 2506dn HP LaserJet Tank 1020 HP LaserJet Tank 1020w HP LaserJet Tank 1020nw Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org> ----------------------------------------------------------------------- Summary of changes: config/rootfiles/common/freetype | 3 +- .../{oldcore/110 => core/168}/filelists/freetype | 0 config/rootfiles/packages/hplip | 82 ++++++++++++---------- config/rootfiles/packages/sdl2 | 2 +- lfs/freetype | 4 +- lfs/hplip | 6 +- lfs/sdl2 | 6 +- 7 files changed, 56 insertions(+), 47 deletions(-) copy config/rootfiles/{oldcore/110 => core/168}/filelists/freetype (100%) Difference in files: diff --git a/config/rootfiles/common/freetype b/config/rootfiles/common/freetype index ceb06b4d6..e7d8e9ff9 100644 --- a/config/rootfiles/common/freetype +++ b/config/rootfiles/common/freetype @@ -51,6 +51,7 @@ #usr/include/freetype2/freetype/fttrigon.h #usr/include/freetype2/freetype/fttypes.h #usr/include/freetype2/freetype/ftwinfnt.h +#usr/include/freetype2/freetype/otsvg.h #usr/include/freetype2/freetype/t1tables.h #usr/include/freetype2/freetype/ttnameid.h #usr/include/freetype2/freetype/tttables.h @@ -59,7 +60,7 @@ #usr/lib/libfreetype.la #usr/lib/libfreetype.so usr/lib/libfreetype.so.6 -usr/lib/libfreetype.so.6.18.1 +usr/lib/libfreetype.so.6.18.3 #usr/lib/pkgconfig/freetype2.pc #usr/share/aclocal/freetype2.m4 #usr/share/man/man1/freetype-config.1 diff --git a/config/rootfiles/core/168/filelists/freetype b/config/rootfiles/core/168/filelists/freetype new file mode 120000 index 000000000..79ec5c42e --- /dev/null +++ b/config/rootfiles/core/168/filelists/freetype @@ -0,0 +1 @@ +../../../common/freetype \ No newline at end of file diff --git a/config/rootfiles/packages/hplip b/config/rootfiles/packages/hplip index 4aa5803b9..86b7a4cfc 100644 --- a/config/rootfiles/packages/hplip +++ b/config/rootfiles/packages/hplip @@ -1,40 +1,40 @@ -#usr/share/doc/hplip-3.22.2 -#usr/share/doc/hplip-3.22.2/COPYING -#usr/share/doc/hplip-3.22.2/README_LIBJPG -#usr/share/doc/hplip-3.22.2/commandline.html -#usr/share/doc/hplip-3.22.2/copying.html -#usr/share/doc/hplip-3.22.2/copyright -#usr/share/doc/hplip-3.22.2/devicemanager.html -#usr/share/doc/hplip-3.22.2/faxtrouble.html -#usr/share/doc/hplip-3.22.2/gettinghelp.html -#usr/share/doc/hplip-3.22.2/hpscan.html -#usr/share/doc/hplip-3.22.2/images -#usr/share/doc/hplip-3.22.2/images/favicon.ico -#usr/share/doc/hplip-3.22.2/images/print.png -#usr/share/doc/hplip-3.22.2/images/toolbox_actions.png -#usr/share/doc/hplip-3.22.2/images/toolbox_fax.png -#usr/share/doc/hplip-3.22.2/images/toolbox_print_control.png -#usr/share/doc/hplip-3.22.2/images/toolbox_print_settings.png -#usr/share/doc/hplip-3.22.2/images/toolbox_status.png -#usr/share/doc/hplip-3.22.2/images/toolbox_supplies.png -#usr/share/doc/hplip-3.22.2/images/xsane.png -#usr/share/doc/hplip-3.22.2/index.html -#usr/share/doc/hplip-3.22.2/mainttask.html -#usr/share/doc/hplip-3.22.2/plugins.html -#usr/share/doc/hplip-3.22.2/print.html -#usr/share/doc/hplip-3.22.2/printing.html -#usr/share/doc/hplip-3.22.2/printoptions.html -#usr/share/doc/hplip-3.22.2/printtroubleshooting.html -#usr/share/doc/hplip-3.22.2/scanning.html -#usr/share/doc/hplip-3.22.2/scantrouble.html -#usr/share/doc/hplip-3.22.2/sendfax.html -#usr/share/doc/hplip-3.22.2/setup.html -#usr/share/doc/hplip-3.22.2/styles -#usr/share/doc/hplip-3.22.2/styles/css.css -#usr/share/doc/hplip-3.22.2/systray.html -#usr/share/doc/hplip-3.22.2/troubleshooting.html -#usr/share/doc/hplip-3.22.2/uninstalling.html -#usr/share/doc/hplip-3.22.2/upgrading.html +#usr/share/doc/hplip-3.22.4 +#usr/share/doc/hplip-3.22.4/COPYING +#usr/share/doc/hplip-3.22.4/README_LIBJPG +#usr/share/doc/hplip-3.22.4/commandline.html +#usr/share/doc/hplip-3.22.4/copying.html +#usr/share/doc/hplip-3.22.4/copyright +#usr/share/doc/hplip-3.22.4/devicemanager.html +#usr/share/doc/hplip-3.22.4/faxtrouble.html +#usr/share/doc/hplip-3.22.4/gettinghelp.html +#usr/share/doc/hplip-3.22.4/hpscan.html +#usr/share/doc/hplip-3.22.4/images +#usr/share/doc/hplip-3.22.4/images/favicon.ico +#usr/share/doc/hplip-3.22.4/images/print.png +#usr/share/doc/hplip-3.22.4/images/toolbox_actions.png +#usr/share/doc/hplip-3.22.4/images/toolbox_fax.png +#usr/share/doc/hplip-3.22.4/images/toolbox_print_control.png +#usr/share/doc/hplip-3.22.4/images/toolbox_print_settings.png +#usr/share/doc/hplip-3.22.4/images/toolbox_status.png +#usr/share/doc/hplip-3.22.4/images/toolbox_supplies.png +#usr/share/doc/hplip-3.22.4/images/xsane.png +#usr/share/doc/hplip-3.22.4/index.html +#usr/share/doc/hplip-3.22.4/mainttask.html +#usr/share/doc/hplip-3.22.4/plugins.html +#usr/share/doc/hplip-3.22.4/print.html +#usr/share/doc/hplip-3.22.4/printing.html +#usr/share/doc/hplip-3.22.4/printoptions.html +#usr/share/doc/hplip-3.22.4/printtroubleshooting.html +#usr/share/doc/hplip-3.22.4/scanning.html +#usr/share/doc/hplip-3.22.4/scantrouble.html +#usr/share/doc/hplip-3.22.4/sendfax.html +#usr/share/doc/hplip-3.22.4/setup.html +#usr/share/doc/hplip-3.22.4/styles +#usr/share/doc/hplip-3.22.4/styles/css.css +#usr/share/doc/hplip-3.22.4/systray.html +#usr/share/doc/hplip-3.22.4/troubleshooting.html +#usr/share/doc/hplip-3.22.4/uninstalling.html +#usr/share/doc/hplip-3.22.4/upgrading.html #usr/share/hplip usr/share/hplip/dat2drv usr/share/hplip/locatedriver @@ -847,6 +847,10 @@ usr/share/ppd/HP #usr/share/ppd/HP/hp-laserjet_p4515tn.ppd.gz #usr/share/ppd/HP/hp-laserjet_p4515x.ppd.gz #usr/share/ppd/HP/hp-laserjet_p4515xm.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_4001-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_4002-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_4003-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_4004-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_m118-m119-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_m148-m149-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_m148f-m149f-ps.ppd.gz @@ -862,6 +866,10 @@ usr/share/ppd/HP #usr/share/ppd/HP/hp-laserjet_pro_m501n-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_m701-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_m706-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_mfp_4101-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_mfp_4102-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_mfp_4103-ps.ppd.gz +#usr/share/ppd/HP/hp-laserjet_pro_mfp_4104-ps.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_mfp_m125a.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_mfp_m125nr.ppd.gz #usr/share/ppd/HP/hp-laserjet_pro_mfp_m125nw.ppd.gz diff --git a/config/rootfiles/packages/sdl2 b/config/rootfiles/packages/sdl2 index ae18130fb..a95500017 100644 --- a/config/rootfiles/packages/sdl2 +++ b/config/rootfiles/packages/sdl2 @@ -81,7 +81,7 @@ #usr/lib/cmake/SDL2/sdl2-config-version.cmake #usr/lib/cmake/SDL2/sdl2-config.cmake usr/lib/libSDL2-2.0.so.0 -usr/lib/libSDL2-2.0.so.0.18.2 +usr/lib/libSDL2-2.0.so.0.22.0 #usr/lib/libSDL2.la usr/lib/libSDL2.so #usr/lib/libSDL2_test.a diff --git a/lfs/freetype b/lfs/freetype index 8a308d70d..5233f7bb8 100644 --- a/lfs/freetype +++ b/lfs/freetype @@ -24,7 +24,7 @@ include Config -VER = 2.11.1 +VER = 2.12.1 THISAPP = freetype-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 15cc03e7b8ba93b2f240b0eee3f1cc07bca77d9ef67a1971d44d6c061a0dff2b13737fa417f7f2dc4e7e6df660223325931f69a107a6b2eaf14425fc71b7ca7b +$(DL_FILE)_BLAKE2 = c4737dc0c6e44e0a911545d604fdb2e8e8b3f5185d3f5dfe4e4561ee2d75b3e5a31afcbb2089306fec4b31ba10324a6ec6499c3735b2b7591c71e96fee4ed278 install : $(TARGET) diff --git a/lfs/hplip b/lfs/hplip index 9c8e240ea..8c25f8f4d 100644 --- a/lfs/hplip +++ b/lfs/hplip @@ -26,7 +26,7 @@ include Config SUMMARY = HP's Printing, Scanning, and Faxing Software -VER = 3.22.2 +VER = 3.22.4 THISAPP = hplip-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = hplip -PAK_VER = 7 +PAK_VER = 8 DEPS = @@ -48,7 +48,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = d262307430b5a4ca05f2a58cdadc212e93b73141906c0852a2b9b2ced33b942dbec6d9f2fc1f79773d3d37a9d71f37b5fe457ba574d7bf826cd3afeb80d4f05d +$(DL_FILE)_BLAKE2 = 6446cecad6a9dea4685874da4879b604ad5c68842783741e8ee87b5cf957a8cc69269ced0a4fa40077abcc35fd0cd8f0103f90e02f1a1244a28617dfd0cd4036 install : $(TARGET) diff --git a/lfs/sdl2 b/lfs/sdl2 index fb9bee353..0e1d70950 100644 --- a/lfs/sdl2 +++ b/lfs/sdl2 @@ -24,7 +24,7 @@ include Config -VER = 2.0.20 +VER = 2.0.22 SUMMARY = Simple DirectMedia Layer Library THISAPP = SDL2-$(VER) @@ -33,7 +33,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = sdl2 -PAK_VER = 6 +PAK_VER = 7 DEPS = alsa @@ -47,7 +47,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 03c6d462674aeb90559003e9f4c74f66833e193d2de3f3975f1e1684c5bdccb5c1b3c64c22c822777a63ee218d87fd04ff047b012d8db30a1565dafa34161623 +$(DL_FILE)_BLAKE2 = 7f8b3efa709a0514f6a76df4ffc8b756d287d1e372ed107d0525a22cb5e6a168709136d375b6708b2073a76dd30d1bf06203d2c5c3eb2990e80519c7d1558df5 install : $(TARGET) hooks/post-receive -- IPFire 2.x development tree

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

IPFire-SCM May 2022