[git.ipfire.org] IPFire 2.x development tree branch, next, updated. a38c882bfb59d5b359b22df3d97f3ed88f497d93

25 Oct 2021

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, next has been updated
       via  a38c882bfb59d5b359b22df3d97f3ed88f497d93 (commit)
      from  a8dd6e98ba04b8dc0e7642beab16c9efeaee6e33 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit a38c882bfb59d5b359b22df3d97f3ed88f497d93
Author: Arne Fitzenreiter arne_f@ipfire.org
Date:   Mon Oct 25 13:45:39 2021 +0200
strongswan: remove CONNMARK rules.
the marks are not used by firewall and QoS anymore.
Signed-off-by: Arne Fitzenreiter arne_f@ipfire.org
-----------------------------------------------------------------------
Summary of changes:
 src/patches/strongswan-ipfire.patch | 86 ++++++++++++-------------------------
 1 file changed, 27 insertions(+), 59 deletions(-)
Difference in files:

diff --git a/src/patches/strongswan-ipfire.patch b/src/patches/strongswan-ipfire.patch
index 38202c1ec..31c32dc4e 100644
--- a/src/patches/strongswan-ipfire.patch
+++ b/src/patches/strongswan-ipfire.patch
@@ -1,7 +1,7 @@
 diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_updown/_updown.in
 --- strongswan-5.9.3.org/src/_updown/_updown.in	2020-12-09 19:01:30.000000000 +0100
-+++ strongswan-5.9.3/src/_updown/_updown.in	2021-10-18 14:51:34.446203334 +0200
-@@ -242,12 +242,15 @@
++++ strongswan-5.9.3/src/_updown/_updown.in	2021-10-25 13:41:23.791826699 +0200
+@@ -242,12 +242,9 @@
    # connection to me, with (left/right)firewall=yes, coming up
    # This is used only by the default updown script, not by your custom
    # ones, so do not mess with it; see CAUTION comment up at top.
@@ -10,17 +10,12 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
        -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
        -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
 -	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	iptables --wait -I IPSECINPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
-+	iptables --wait -I IPSECOUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+-	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
 -	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
-+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j CONNMARK --set-xmark 0x00800000/0x00800000
    #
    # allow IPIP traffic because of the implicit SA created by the kernel if
    # IPComp is used (for small inbound packets that are not compressed)
-@@ -263,10 +266,10 @@
+@@ -263,10 +260,10 @@
      if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
      then
        logger -t $TAG -p $FAC_PRIO \
@@ -33,26 +28,21 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
      fi
    fi
    ;;
-@@ -274,12 +277,15 @@
+@@ -274,12 +271,9 @@
    # connection to me, with (left/right)firewall=yes, going down
    # This is used only by the default updown script, not by your custom
    # ones, so do not mess with it; see CAUTION comment up at top.
 -	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	    -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
 +	iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
        -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
        -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
 -	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	iptables --wait -D IPSECOUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+-	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
 -	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
-+	    -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j CONNMARK --set-xmark 0x00800000/0x00800000
    #
    # IPIP exception teardown
    if [ -n "$PLUTO_IPCOMP" ]
-@@ -294,10 +300,10 @@
+@@ -294,10 +288,10 @@
      if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
      then
        logger -t $TAG -p $FAC_PRIO -- \
@@ -65,23 +55,18 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
      fi
    fi
    ;;
-@@ -307,24 +313,30 @@
+@@ -307,24 +301,18 @@
    # ones, so do not mess with it; see CAUTION comment up at top.
    if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
    then
 -	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	  iptables --wait -I IPSECFORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j RETURN
-+	  iptables --wait -I IPSECFORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+-	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
 -	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
 -	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j CONNMARK --set-xmark 0x00800000/0x00800000
 +	  iptables --wait -I IPSECFORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
          -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
 -	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
++	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j RETURN
    fi
    #
    # a virtual IP requires an INPUT and OUTPUT rule on the host
@@ -93,18 +78,13 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
 -	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
 -	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j RETURN
-+	  iptables --wait -I IPSECINPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
-+	  iptables --wait -I IPSECOUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+-	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
 -	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
-+	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j CONNMARK --set-xmark 0x00800000/0x00800000
++	      -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j RETURN
    fi
    #
    # allow IPIP traffic because of the implicit SA created by the kernel if
-@@ -332,7 +344,7 @@
+@@ -332,7 +320,7 @@
    # INPUT is correct here even for forwarded traffic.
    if [ -n "$PLUTO_IPCOMP" ]
    then
@@ -113,7 +93,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
    fi
    #
-@@ -342,12 +354,29 @@
+@@ -342,12 +330,29 @@
      if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
      then
        logger -t $TAG -p $FAC_PRIO \
@@ -145,25 +125,19 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
    ;;
  down-client:iptables)
    # connection to client subnet, with (left/right)firewall=yes, going down
-@@ -355,34 +384,42 @@
+@@ -355,34 +360,26 @@
    # ones, so do not mess with it; see CAUTION comment up at top.
    if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
    then
 -	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	  iptables --wait -D IPSECFORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
- 	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+-	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
 -	         $IPSEC_POLICY_OUT -j ACCEPT
 -	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	         $IPSEC_POLICY_OUT -j CONNMARK --set-xmark 0x00800000/0x00800000
 +	  iptables --wait -D IPSECFORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
          -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
          -d $PLUTO_MY_CLIENT $D_MY_PORT \
 -	         $IPSEC_POLICY_IN -j ACCEPT
-+	         $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
-+	  iptables --wait -D IPSECFORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
 +	         $IPSEC_POLICY_IN -j RETURN
    fi
    #
@@ -177,16 +151,10 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -d $PLUTO_MY_CLIENT $D_MY_PORT \
 -	         $IPSEC_POLICY_IN -j ACCEPT
 -	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
-+	         $IPSEC_POLICY_IN -j CONNMARK --set-xmark 0x00800000/0x00800000
-+	  iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
-+	      -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
-+	      -d $PLUTO_MY_CLIENT $D_MY_PORT \
-+	         $IPSEC_POLICY_IN -j RETURN
-+	  iptables --wait -D IPSECOUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- 	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
- 	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+-	      -s $PLUTO_MY_CLIENT $S_MY_PORT \
+-	      -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
 -	         $IPSEC_POLICY_OUT -j ACCEPT
-+	         $IPSEC_POLICY_OUT -j CONNMARK --set-xmark 0x00800000/0x00800000
++	         $IPSEC_POLICY_IN -j RETURN
    fi
    #
    # IPIP exception teardown
@@ -197,7 +165,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT
    fi
    #
-@@ -392,12 +429,29 @@
+@@ -392,12 +389,29 @@
      if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ]
      then
        logger -t $TAG -p $FAC_PRIO -- \
@@ -229,7 +197,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
    ;;
  #
  # IPv6
-@@ -422,10 +476,10 @@
+@@ -422,10 +436,10 @@
    # connection to me, with (left/right)firewall=yes, coming up
    # This is used only by the default updown script, not by your custom
    # ones, so do not mess with it; see CAUTION comment up at top.
@@ -242,7 +210,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
        -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
        -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
    #
-@@ -454,10 +508,10 @@
+@@ -454,10 +468,10 @@
    # connection to me, with (left/right)firewall=yes, going down
    # This is used only by the default updown script, not by your custom
    # ones, so do not mess with it; see CAUTION comment up at top.
@@ -255,7 +223,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
        -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
        -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT
    #
-@@ -487,10 +541,10 @@
+@@ -487,10 +501,10 @@
    # ones, so do not mess with it; see CAUTION comment up at top.
    if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
    then
@@ -268,7 +236,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
          -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
    fi
-@@ -499,10 +553,10 @@
+@@ -499,10 +513,10 @@
    # or sometimes host access via the internal IP is needed
    if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
    then
@@ -281,7 +249,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_MY_CLIENT $S_MY_PORT \
          -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT
    fi
-@@ -535,11 +589,11 @@
+@@ -535,11 +549,11 @@
    # ones, so do not mess with it; see CAUTION comment up at top.
    if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ]
    then
@@ -295,7 +263,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd
          -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
          -d $PLUTO_MY_CLIENT $D_MY_PORT \
             $IPSEC_POLICY_IN -j ACCEPT
-@@ -549,11 +603,11 @@
+@@ -549,11 +563,11 @@
    # or sometimes host access via the internal IP is needed
    if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
    then
hooks/post-receive
--
IPFire 2.x development tree

    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

[git.ipfire.org] IPFire 2.x development tree branch, next, updated. a38c882bfb59d5b359b22df3d97f3ed88f497d93