This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree".
The branch, next has been updated via 3608d485567284b52c17754c7f8809ee793db7cc (commit) via b0ec4158f374ccc2fe7e73caf40ce26f1db45025 (commit) from f62f432a27a0e7d25fb4b9700b5ff35acef84f20 (commit)
Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.
- Log ----------------------------------------------------------------- commit 3608d485567284b52c17754c7f8809ee793db7cc Author: Michael Tremer michael.tremer@ipfire.org Date: Wed May 29 15:28:45 2019 +0100
make.sh: Have a ccache for each architecture
It does not make much sense to mix architectures into a single ccache:
* There is never going to be a match * The cache gets bigger and therefore slower * If both architectures are being compiled one after the other and the cache hits its maximum size, cached but still needed content will be dropped * Only both can be deleted together
This small change splits this into multiple caches. One per architecture. Therefore we should be more efficient on builders that build for multiple architectures.
Signed-off-by: Michael Tremer michael.tremer@ipfire.org
commit b0ec4158f374ccc2fe7e73caf40ce26f1db45025 Author: Michael Tremer michael.tremer@ipfire.org Date: Wed May 29 15:24:29 2019 +0100
miau: Drop package
This is not maintained since 2010
Signed-off-by: Michael Tremer michael.tremer@ipfire.org
-----------------------------------------------------------------------
Summary of changes: config/backup/includes/miau | 1 - config/miau/miaurc | 742 ----------------------------------------- config/rootfiles/packages/miau | 22 -- lfs/miau | 98 ------ make.sh | 5 +- src/initscripts/packages/miau | 47 --- 6 files changed, 2 insertions(+), 913 deletions(-) delete mode 100644 config/backup/includes/miau delete mode 100644 config/miau/miaurc delete mode 100644 config/rootfiles/packages/miau delete mode 100644 lfs/miau delete mode 100644 src/initscripts/packages/miau
Difference in files: diff --git a/config/backup/includes/miau b/config/backup/includes/miau deleted file mode 100644 index e93353aff..000000000 --- a/config/backup/includes/miau +++ /dev/null @@ -1 +0,0 @@ -/opt/miau/config/miaurc diff --git a/config/miau/miaurc b/config/miau/miaurc deleted file mode 100644 index 866ff1d1b..000000000 --- a/config/miau/miaurc +++ /dev/null @@ -1,742 +0,0 @@ -# -# miau 0.6.2 configuration file example -# (C) 2003-2006 Tommi Saviranta wnd@iki.fi -# - -# About structure of this configuration file: -# -# - All parameters are written inside quotes (for example, "foobar") -# -# - Options are defined like: option = "parameter1"[:"parameter2"] ... -# -# - When entering multiparameter options, certain parameters have default -# values and can be left out. -# -# - When entering multiparameter options and, for example, user doesn't want -# to set parameter2 at all but he needs to set parameter3, parameter2 can -# be skipped with column (':') like: "parameter1"::"parameter3". -# -# - Empty lines and characters after '#' (hash) are ignored. -# -# - When setting permissions, switched etc. (switches (booleans) are described -# as "state"), everything beginning with "t", "r" and "1" are concidered as -# "true" or "yes" (positive). Everything else is "false" or "no" (negative). - - - -# Required settings -################################################################################ - - -# nicknames = { "nick" }: Your nickname (and secondary nicknames) on IRC. -# -# If the primary nick (first nick on the list) is already on use, miau will try -# the others on the list. -# -# Default: no default -# -# Example: -#nicknames = { -# "zak" -# "zakh" -#} -nicknames = { - "miau_bnc_on_ipfire" - "miau_bnc_on_ipfire_" - "miau_bnc_on_ipfire__" -} - - -# realname = "realname": Your "real" name on IRC. -# -# Default: no default -# -# Example: -#realname = "Prokhor Zakharov" -realname = "miau_bnc_on_ipfire" - - -# username = "username": Your username. -# -# Your ident, matters only if you don't have identd running. -# -# Default: no default -# -# Example: -#username = "zak" - -username = "miau_bnc_on_ipfire" - -# password = "password": The password miau will expect to receive from client -# when it's registering with nick. -# -# If this is 13 characters long, miau assumed it's crypted. -# -# If miau is compiled with ENABLE_MKPASSWD, miau can generate password-hashes -# (from command line) with -c -switch. -# -# Default: no default -# -# Example: -#password = "foobar" -password = "" - - -# listenport = "port": The port miau will wait for incoming connections. -# -# Default: no default -# -# Example: -listenport = "4096" - - -# servers = { "server":"port":"password":"timeout" }: miau's IRC-server-list. -# -# Each line represents one server, where timeout is delay in seconds before -# connectiong attempt times out. Only "server" parameter is required. -# -# Default: no default -# -# Example: -#servers = { -# "irc.net" -# "irc.foo.bar":"6662" -# "localhost"::"foobar" -# "127.0.0.1":"6670"::"5" -#} -servers = { - "irc.freenode.net" -} - - -# connhosts = { "host":"permitted" }: List of hosts that are allowed (or denied) -# to connect to miau. -# -# When boolean-value is left unset, it is assumed to be "true". This list will -# be processed as a chain which means latter rules can override previous ones. -# -# Default: no default -# -# Example: -#connhosts = { -# "*":"yes" -# "client*.evil.net":"no" -#} -connhosts = { -# "192.168.1.*":"yes" - "*":"yes" -} - - - -# Optional settings -################################################################################ - - -# statelog = "state": Should miau write state log. -# -# When true, log will be written to "$MIAUDIR/log". If set to false, the same -# stuff is printed on stdout (on terminal). -# -# Default: true -# -# Example: -#statelog = "false" - - -# listenhost = "host": Host miau uses to listen on. -# -# If you are compiled with IPV6 and need this to listen on an IPV4 port, you -# must use an IP in the form ::FFFF:127.0.0.1 -# -# Default: no default -# -# Example: -listenhost = "0.0.0.0" - - -# floodtimer = "number": Time it takes to send one message. -# -# When configuring flood-protection, this variable defined how fast you can -# send messages; how many seconds sending one message takes. See also burstsize. -# -# Default: 2 -# -# Example -#floodtimer = "1" - - -# burstsize = "number": How manu messages can be sent at once. -# -# When onfiguring flood-protection, this variable defined how many messages -# can be sent at once (in a burst). See also floodtimer. -# -# Default: 5 -# -# Example: -#burstsize = "5" - - -# jointries = "number": Number of tries to join channel after dropping from -# server etc. miau tries to join channels once a minute. -# -# Default: 30 -# -# Example: -#jointries = "1440" - - -# bind = "host": Host/IP miau uses for outgoing connections. -# -# Default: none -# -# Example: -#bind = "172.16.1.1" - - -# maxclients = "number": Maximum number of clients connected to miau -# concurrently. -# -# Set to zero for unlimited clients. -# -# Default: 3 -# -#Example: -#maxclients = "1" - - -# stonedtimeout = "seconds": Time (in seconds) with no data from the server -# before it is declared stoned and being disconnected. -# -# Although minimum value is 30, this value has no upper limit. Watch out, -# though, if this value is set too high, death of servers may stay undetected -# for a very long time if you are idle. -# -# Default: 90 -# -# Example: -#stonedtimeout = "150" - - -# connecttimeout = "seconds": Time (in seconds) before connection attampt will -# time out. -# -# Note that while connecting to the server miau will not respond to clients. -# Minimum value is 5, and many systems define maximum value. -# -# Default: 30 -# -# Example: -#connecttimeout = "60" - - -# channels = { "channel":"keyword" }: List of channels to join. -# -# Default: none -# -# Example: -#channels = { -# "#lugop" -#} -channels = { - } - -# rejoin = "state": Rejoin channels after disconnecting from the server. -# -# If rejoin is set to true, channels defined in "channels" are also joined when -# client first time connects to miau. -# -# Default: true -# -# Example: -#rejoin = "false" - - -# leave = "state": Leave channels when all clients have detached from miau. -# -# If "leave" is set to "false" and "rejoin" is set to "true", channels defined -# at "channels" will be joined at miau startup. If both "leave" and "rejoin" -# is set to "true", channels that are left at client detach, are rejoined when -# client attached back to miau. -# -# Default: false -# -# Example: -#leave = "false" - - -# leavemsg = "message": Message miau will either use as PART-message or as an -# ACTION when all clients have detached from miau. -# -# If unset or set to empty, no message will be shown. Note that many people -# dislike event-based messages (which happens when "leave" is set to "false" -# and "leavemsg" is set). Also see usequitmsg. -# -# Note: Note that commenting this option out and rehashing after leavemsg was -# set, this option is _not_ reverted. To disable leavemsg afterwards you -# need to write an empty string here and rehash. -# -# Default: none -# -# Example: -#leavemsg = "doh" - - -# awaymsg = "message": Text that will be set to miau's away-reason when all -# clients have detached from miau. -# -# If unset or set to empty, AWAY-status will be left untouched. When any client -# attaches back to miau, AWAY-status will be reset. Also see usequitmsg. -# -# Note: If user sets him/herself away, miau will not touch away-status nor -# message neither when connecting to or disconnecting from miau. -# -# Note: Note that commenting this option out and rehashing after awaymsg was -# set, this option is _not_ reverted. To disable awaymsg afterwards you -# need to write an empty string here and rehash. -# -# Default: none -# -# Example: -#awaymsg = "bouncing around - all private messages will be logged" - - -# usequitmsg = "state": Use last quit-reason as away-reason and/or leave-message -# (if respective options are enabled) when all clients have -# disconnected from miau. -# -# If quit-reason is empty, default values of awaymsg and leavemsg will be used, -# otherwise most recent quit-message overrides values in miaurc. -# -# Default: true -# -# Example: -# usequitmsg = "false" - - -# autoaway = "selection": miau can set user away automatically. -# -# This option allows to define when to do that. This option may be one of the -# following: "never", "detach", "noclients". -# -# never: never set user away -# detach: set user away when any of the clients disconnects -# noclients: set user away when the last client disconnects -# -# Default: detach -# -# Example: -#autoaway = "noclients" - - -# chandiscon = "selection": When miau is disconnected from the server e.g. -# because of network problem, miau can notify user about this in -# a couple of ways. -# -# nothing: only print server notice -# notice: send notice to each channel -# part: part each channel. mIRC users probably don't want to use this. -# privmsg: send a private message to the user -# -# Default: part -# -# Example: -#chandiscon = "notice" - - -# getnick = "selection": miau can try to reclaim your primary nick when it is -# lost. -# -# This option may be one of the following: "never", "detached", "attached", or -# "always". -# -# never miau will not try to get your nick back -# detached miau will try to get your nick when no clients are attached -# attached miau will try to get your nick when there are one or more -# clients attached -# always miau will try to get your nick -# -# Note: Do _not_ use options "attached" and "always" with clients (like -# irc-II EPIC) that automatically change your nick when they receive -# NICKINUSE from the server - you might end up chaning your nick until -# server drops your connection due excess flood. -# -# Note: If you issue "/nick not-primary-nick", miau will start trying to get -# your primary nick back. -# -# Default: detached -# -# Example: -getnick = "always" - - -# getnickinterval = "seconds": Time between tries (in seconds) to obtain -# currently (possibly) lost primary nick. -# -# Don't set it too low or you might get kicked out the server due to excess -# flood. -# -# Default: 60 -# -# Example: -#getnickinterval = "30" - - -# antiidle = "minutes": Time between idle-timer resets in minutes. Set to 0 to -# disable. -# -# Default: 0 -# -# Example: -#antiidle = "300" - - -# qloglength = "minutes": Age of oldest line in quicklog in minutes. Set to zero -# to disable quicklog. -# -# This option might not be compiled in. -# -# Default: 30 -# -# Example: -qloglength = "60" - - -# timestamp = "option": Location of timestamp in quicklog events. -# -# This option may be one of the following "beginning", "end", or "none". -# -# This option might not be compiled in. -# -# Default: none -# -# Example: -#timestamp = "beginning" - - -# flushqlog = "state": Erase quicklog when quicklog is replayed. -# -# If set to true, quicklog will be written only when no clients are connected -# and quicklog will be erased when client connects to miau. If you are running -# a single client, you probably want to leave this to "false. -# -# This option might not be compiled in. -# -# Default: true -# -# Example: -#flushqlog = "true" - - -# autoqlog = "minutes": Automatically replay number of minutes of quiclog on -# attach. -# -# This option might not be compiled in. -# -# Default: 30 -# -# Example: -#autoqlog = "30" - - -# inbox = "state": Enables logging private messages when no clients are -# connected to miau. -# -# This option might not be compiled in. -# -# Default: true -# -# Example: -#inbox = "true" - - -# nevergiveup = "state": Don't die when miau runs out of working servers. -# -# If set to true, miau will reset "working"-status of servers to working when -# all are set to dysfunctional. Respectively, if set to false, miau will quit -# when all servers on the list have been set to dysfunctional. -# -# Default: true -# -# Example: -#nevergiveup = "false" - - -# norestricted = "state": Don't join servers where you get "+r". -# -# If set to true, miau will not stay on server that forces user to have -# restricted-status (+r). -# -# Default: true -# -# Example: -#norestricted = "false" - - -# reconnectdelay = "seconds": Time (in seconds) between connection attempts. -# -# Minumun value is set to 1. -# -# Default: 10 -# -# Example: -#reconnectdelay = "30" - - -# nickfillchar = "fill character": Fill nick with this character when unique -# nick is required. -# -# Character used to modify your primary nick when all defined nicks are already -# occupied. Note character is a single octet (byte) and if longer string is -# fed, only the first character is used. -# -# Example: When nickfillchar is set to '_', primary nick is "zak" and all -# defined nicks are occupied, next nicks tried are "zak_", "zak__", -# "zak___" and so on. When nick has grown too long, it will be shifted -# one characted to right (where shift is cyclic) - this means -# "zak______" will become "_zak_____", which, again, will become -# "__zak____". -# -# Default: _ -# -# Example: -#nickfillchar = "^" - - -# maxnicklen = "length": Maximum nick length, used with nickfillchar. -# -# Default: 9 -# -# Example: -#maxnicklen = "11" - - -# usermode = "usermode(s)": Usermode. -# -# Usermode that miau will request (if no clients are attached at the moment) -# from the server when connection to the server is established. Leave unset or -# set to empty to disable this feature. -# -# Default: none -# -# Example: -#usermode = "+i" - - -# forwardmsg = "command": Commands to pipe private messages to. -# -# miau can collect the (private) messages within specified time (see -# forwardtime) and pipe them into the program specified. Leave this unset or -# set to empty to disable this feature. -# -# Default: none -# -# Example: -#forwardmsg = "mail user@host" - - -# forwardtime = "seconds": Time between sending stuff in forwardmsg queue. -# -# Time in seconds after first inserted line into forwardmsg queue before -# piping the stuff out. -# -# Default: 180 -# -# Example: -#forwardtime = "3600" - - -# ignore = { "mask":"ignored" }: Ignored users. -# -# List of users whose private messages (PRIVMSG) and noticies (NOTICE) are -# ignored when no clients are attached to miau. When "ignored" is left -# undefined, it is assumed to be "true". Setting "ignored" to "false" means -# that this user will _not_ be ignored. This list is processed as a chain. -# -# Default: none -# -# Example: -#ignore = { -# "*@localhost":"yes" -# "zak*":"no" -#} - - -# privlog = "mode": Log private messages. -# -# Whatever private messages should be logged in nick-specific files. Can be one -# of "never", "detached", "attached", and "always". -# -# This option might not be compiled in. -# -# Default: never -# -# Example: -privlog = "always" - - -# chanlog = { "channel(s)":"options":"logfile" }: List of channel logfiles. -# -# When channel is set to "*", line represents global log. When logging, -# if channel doesn't have entry of it's own in this list, it will use settings -# of global log and write log to it's own file. When defining global log, -# "logfile" is ignored. Each line can have multiple channels -# (like "#foobar,#miau"). -# -# If logfile is left undefined, logfile will be named after the channel with -# possible suffix (see logsuffix). All lofiles are written in miau's work -# directory. -# -# Options consist of abritary set of following possibilities: -# j: log joins -# e: log parts (exits) -# q: log quits -# m: log messages (privmsg/notice) -# c: log mode changes (changes) -# n: log nick changes -# o: log misc events (other) -# b: log messages from miau (bouncer) -# a: log all of above -# A: log when a client is attached -# D: log when a client is detached -# C: log continuously (status of clients doesn't matter) -# -# Note that all channelless messages (such as QUIT) are logged on every active -# channel. This is a feature, not a bug. -# -# This option might not be compiled in. -# -# Default: none -# -# Example: -chanlog = { - "#epel":"a":"epel.log" # log everything on #foobar - "#lugop":"a":"lugop.log" # log everything on #foobar -# "#miau":"aD":"foo.log" # log everything to file "foo.log" when -# all clients are detached -# "*":"mjeq" # log only messages, joins, parts and quits -# by default -#} - - -# logsuffix = "suffix": Suffix for logfiles. -# -# When writing log to undefined logfile, each logfile consists of channel name -# followed by suffix. Suffix can be defined here. -# -# This option might not be compiled in. -# -# Default: no suffix -# -# Example: -#logsuffix = ".log" - - -# onconnect = { "mode":"target/data"(:"data") }: Commands to write at server -# connect. -# -# When miau connects and registers user to server, miau can send pre-defined -# messages. User can define miau to send normal messages (PRIVMSG), notices -# (NOTICE) or arbitrary messages. -# -# Mode can be one of the following: -# p: private message (PRIVMSG). -# n: notice (NOTICE). Should be used with services and automatons, but -# unfortunately some network services can't cope with notices. -# r: "raw" message. This means user must provide complete message to send -# to the server. Using raw message user has complete control over what -# is being sent. If you don't know what this is, you don't need this. -# When using modes "p" or "n", user must provide both message and target where -# as with raw messages only one parameter in addition to type should be given. -# -# This option might not be compiled in. -# -# Default: none -# -# Example: -onconnect = { - "p":"nickserv":"identify password" -# "n":"nickserv@services.host.net":"id raboof" -# "r":"OPER foo bar" -} - - -# automodes = { "mask":"privilegded" }: List of people who are automatically -# given certain privilege on channel. -# -# Mask is given in form of "mode:nick!username@host/#channel" (where "mode" is -# a single character) and list is processed as a chain. -# -# This option might not be compiled in. -# -# Default: none -# -# Example: -#automodes = { -# "o:zak*!zak@client*-myisp.com/#channel":"yes" -# "o:zak*!*@evil.impersonator.net/#foobar":"no" -# "v:newbie*!*@ircnet.com/#newbie":"yes" -#} - - -# automodedelay = "seconds": Time (in seconds) after first queued mode change -# would take effect. -# -# During this period of time miau can collect more than one mode change and -# commit up to three at a time. Other situation reasonaly big value (like 30) -# here could prove useful is channel where there are stupid "auto-oping" bots. -# (Stupid bots do mode changes even if someone else did that already.) -# -# This option might not be compiled in. -# -# Default: 30 -# -# Example: -#automodedelay = "60" - - -# cmdpasswd = "password": Password for remote commands. -# -# Please ignore this options. -# -# If this is 13 characters long, miau assumes it's crypted. Comment this out or -# leave it empty to disable remote commands. When sending miau a remote -# command, password _always_ begins with column (':') (if cmdpasswd is set to -# "foobar" (or hash of it), you need to send miau a message beginning with -# ":foobar" to issue a remote command). -# -# This feature might not be compiled in. -# -# If miau is compiled with ENABLE_MKPASSWD, miau can generate password-hashes -# (from command line) with -c -switch. -# -# Default: disabled -# -# Example: -#cmdpasswd = "" - - -# dccbounce = "state": Bounce DDCs. -# -# miau can bounce DCCs. Set to true to enable bouncing. You probably don't -# need this. -# -# This option might not be compiled in. -# -# Default: false -# -# Example: -#dccbounce = "true" - - -# dccbindhost = "host": IP to bind for DDC bounce. -# -# If miau has separate IPs for IRC-network and clients, you should enter IP for -# clients here. -# -# This option might not be compiled in. -# -# Default: no default -# -# Example: -#dccbindhost = "10.0.0.1" diff --git a/config/rootfiles/packages/miau b/config/rootfiles/packages/miau deleted file mode 100644 index 6a17a940e..000000000 --- a/config/rootfiles/packages/miau +++ /dev/null @@ -1,22 +0,0 @@ -var/ipfire/backup/addons/includes/miau -etc/rc.d/init.d/miau -etc/rc.d/rc0.d/K01miau -etc/rc.d/rc6.d/K01miau -etc/rc.d/rc3.d/S60miau -#opt/miau -#opt/miau/bin -opt/miau/bin/miau -#opt/miau/bin/miau-check -#opt/miau/config -opt/miau/config/miaurc -#opt/miau/share -#opt/miau/share/doc -#opt/miau/share/doc/miau -#opt/miau/share/doc/miau/examples -#opt/miau/share/doc/miau/examples/miaurc -#opt/miau/share/info -#opt/miau/share/info/dir -#opt/miau/share/info/miau.info -#opt/miau/share/man -#opt/miau/share/man/man1 -#opt/miau/share/man/man1/miau.1 diff --git a/lfs/miau b/lfs/miau deleted file mode 100644 index 03ad4789b..000000000 --- a/lfs/miau +++ /dev/null @@ -1,98 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 0.6.5 - -THISAPP = miau-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) -PROG = miau -PAK_VER = 2 -CFLAGS = -CXXFLAGS = - -DEPS = "" - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = 76f794889d47ad277c25e9c5bbddefa4 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -dist: - @$(PAK) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && ./configure --prefix=/opt/miau - cd $(DIR_APP) && make $(MAKETUNING) $(EXTRA_MAKE) - cd $(DIR_APP) && make install - mkdir /opt/miau/config - install -v -m 640 $(DIR_SRC)/config/miau/miaurc \ - /opt/miau/config/miaurc - - #install initscripts - $(call INSTALL_INITSCRIPT,miau) - - ln -sf ../init.d/miau /etc/rc.d/rc3.d/S60miau - ln -sf ../init.d/miau /etc/rc.d/rc0.d/K01miau - ln -sf ../init.d/miau /etc/rc.d/rc6.d/K01miau - install -v -m 644 $(DIR_SRC)/config/backup/includes/miau \ - /var/ipfire/backup/addons/includes/miau - @rm -rf $(DIR_APP) - @$(POSTBUILD) diff --git a/make.sh b/make.sh index 30b42bbdb..f2904df08 100755 --- a/make.sh +++ b/make.sh @@ -469,7 +469,7 @@ prepareenv() { mkdir -p "${BASEDIR}/build${TOOLS_DIR}" 2>/dev/null mkdir -p $BASEDIR/build/{etc,usr/src} 2>/dev/null mkdir -p $BASEDIR/build/{dev/{shm,pts},proc,sys} - mkdir -p $BASEDIR/{cache,ccache} 2>/dev/null + mkdir -p $BASEDIR/{cache,ccache/${BUILD_ARCH}} 2>/dev/null
if [ "${ENABLE_RAMDISK}" = "on" ]; then mkdir -p $BASEDIR/build/usr/src @@ -488,7 +488,7 @@ prepareenv() { mount --bind /proc $BASEDIR/build/proc mount --bind /sys $BASEDIR/build/sys mount --bind $BASEDIR/cache $BASEDIR/build/usr/src/cache - mount --bind $BASEDIR/ccache $BASEDIR/build/usr/src/ccache + mount --bind $BASEDIR/ccache/${BUILD_ARCH} $BASEDIR/build/usr/src/ccache mount --bind $BASEDIR/config $BASEDIR/build/usr/src/config mount --bind $BASEDIR/doc $BASEDIR/build/usr/src/doc mount --bind $BASEDIR/html $BASEDIR/build/usr/src/html @@ -1494,7 +1494,6 @@ buildipfire() { lfsmake2 perl-gettext lfsmake2 perl-Sort-Naturally lfsmake2 vdradmin - lfsmake2 miau lfsmake2 perl-DBI lfsmake2 perl-DBD-SQLite lfsmake2 perl-File-ReadBackwards diff --git a/src/initscripts/packages/miau b/src/initscripts/packages/miau deleted file mode 100644 index 2eabd23d5..000000000 --- a/src/initscripts/packages/miau +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/sh -######################################################################## -# Begin $rc_base/init.d/miau -# -# Description : This is a script that starts miau as deamon -# -# Authors : Schantl Stefan (Stevee@ipfire.org) -# -# Version : 01.00 -# -# Notes : -# -######################################################################## - -. /etc/sysconfig/rc -. ${rc_functions} - -case "${1}" in - start) - boot_mesg "Starting miau - another IRC-bouncer/proxy..." - chown -R nobody.nobody /opt/miau - loadproc sudo -u nobody /opt/miau/bin/miau -d /opt/miau/config > /dev/null - evaluate_retval - ;; - - stop) - boot_mesg "Stopping miau - another IRC-bouncer/proxy..." - killproc /opt/miau/bin/miau - ;; - - restart) - ${0} stop - sleep 1 - ${0} start - ;; - - status) - statusproc /opt/miau/bin/miau - ;; - - *) - echo "Usage: ${0} {start|stop|restart|status}" - exit 1 - ;; -esac - -# End $rc_base/init.d/miau
hooks/post-receive -- IPFire 2.x development tree