This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree".

The branch, thirteen has been updated via 421102e775e8822f0c48f730dff86efc8cd20ce8 (commit) via cc45d23e03e7632b13bd6625408b9dde6fe553ef (commit) from ff284736aa0ec6d59a00e8642c0e3a55b76759a5 (commit)

Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.

- Log ----------------------------------------------------------------- commit 421102e775e8822f0c48f730dff86efc8cd20ce8 Author: Arne Fitzenreiter arne_f@ipfire.org Date: Fri Sep 21 15:21:02 2012 -0400

rpi: updated firmware and patchset.

commit cc45d23e03e7632b13bd6625408b9dde6fe553ef Author: Arne Fitzenreiter arne_f@ipfire.org Date: Fri Sep 21 15:19:55 2012 -0400

v4l-dvb: enabled build for rpi and kirkwood.

-----------------------------------------------------------------------

Summary of changes: config/kernel/kernel.config.armv5tel-ipfire-rpi | 36 +++++++++++++++++++---- config/rootfiles/common/armv5tel/rpi-firmware | 1 + config/rpi-firmware/config.txt | 28 +++++++++++++++++ lfs/linux | 5 +-- lfs/rpi-firmware | 5 ++- make.sh | 4 +- 6 files changed, 66 insertions(+), 13 deletions(-) create mode 100644 config/rpi-firmware/config.txt

Difference in files: diff --git a/config/kernel/kernel.config.armv5tel-ipfire-rpi b/config/kernel/kernel.config.armv5tel-ipfire-rpi index 45bd742..c2445ad 100644 --- a/config/kernel/kernel.config.armv5tel-ipfire-rpi +++ b/config/kernel/kernel.config.armv5tel-ipfire-rpi @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 3.2.28 Kernel Configuration +# Linux/arm 3.2.30 Kernel Configuration # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -17,10 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_FIQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_NEED_MACH_MEMORY_H=y @@ -371,6 +373,29 @@ CONFIG_CMDLINE_FROM_BOOTLOADER=y # # CPU Power Management # + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_STAT=m +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m + +# +# ARM CPU frequency scaling drivers +# +CONFIG_ARM_BCM2835_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y @@ -1469,9 +1494,6 @@ CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTL8192C_COMMON=m CONFIG_WL1251=m # CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m @@ -1485,6 +1507,7 @@ CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m +CONFIG_RTL8192CU=m

# # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1777,7 +1800,7 @@ CONFIG_W1_SLAVE_DS2760=m CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_BQ27000=m # CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=m +CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set

@@ -1885,8 +1908,9 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m -CONFIG_THERMAL=m +CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_BCM2835=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_CORE is not set # CONFIG_WATCHDOG_NOWAYOUT is not set diff --git a/config/rootfiles/common/armv5tel/rpi-firmware b/config/rootfiles/common/armv5tel/rpi-firmware index 4d5d270..4b6d128 100644 --- a/config/rootfiles/common/armv5tel/rpi-firmware +++ b/config/rootfiles/common/armv5tel/rpi-firmware @@ -5,6 +5,7 @@ boot/arm224_start.elf boot/arm240_start.elf boot/bootcode.bin boot/cmdline.txt +boot/config.txt #boot/first32k.bin boot/loader.bin boot/start.elf diff --git a/config/rpi-firmware/config.txt b/config/rpi-firmware/config.txt new file mode 100644 index 0000000..e9bd9bf --- /dev/null +++ b/config/rpi-firmware/config.txt @@ -0,0 +1,28 @@ +############################################################################### +# +# Raspberry Pi - Videocore configuration file +# +############################################################################### + +############################################################################### +# +# Turbo Mode (cpufreq) Settings ... +# default clocks are arm=700, core=250 and sdram=400 +# +############################################################################### +# +# underclock at idle +arm_freq_min=500 +sdram_freq_min=250 +# +# use following paramters to overclock at load +#arm_freq=1000 +#core_freq=450 +#sdram_freq=450 +#over_voltage=2 + +################################################################################ +# +# end +# +################################################################################ diff --git a/lfs/linux b/lfs/linux index c06fc49..b481e65 100644 --- a/lfs/linux +++ b/lfs/linux @@ -26,7 +26,7 @@ include Config

VER = 3.2.30

-RPI_PATCHES = linux-3.2.27-091073b +RPI_PATCHES = linux-3.2.27-807223a

THISAPP = linux-$(VER) DL_FILE = linux-$(VER).tar.bz2 @@ -76,7 +76,7 @@ $(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE) rpi-patches-$(RPI_PATCHES).patch.xz = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).patch.xz

$(DL_FILE)_MD5 = d899e65520424a27661009ea43b28103 -rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = 9daec752fba403a488818df6dd57a714 +rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = b072ccb2534ff910fd5867fc0da1b24a

install : $(TARGET)

@@ -146,7 +146,6 @@ endif ifeq "$(KCFG)" "-rpi" # Apply Raspberry Pi kernel patches. cd $(DIR_APP) && xzcat $(DIR_DL)/rpi-patches-$(RPI_PATCHES).patch.xz | patch -Np1 - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2.27-rpi_fix_dwc_common_build.patch endif

ifeq "$(HEADERS)" "1" diff --git a/lfs/rpi-firmware b/lfs/rpi-firmware index b2afde2..2143d23 100644 --- a/lfs/rpi-firmware +++ b/lfs/rpi-firmware @@ -24,7 +24,7 @@

include Config

-VER = b2200cd +VER = 9f7cff0 THISAPP = rpi-firmware-$(VER) DL_FILE = $(THISAPP).tar.xz DL_FROM = $(URL_IPFIRE) @@ -40,7 +40,7 @@ objects = $(DL_FILE)

$(DL_FILE) = $(DL_FROM)/$(DL_FILE)

-$(DL_FILE)_MD5 = d4b0a5b5fe8cdbe5df17aadd5ec60ff0 +$(DL_FILE)_MD5 = 4de4db529fc2c0000d381d016675e115

install : $(TARGET)

@@ -70,4 +70,5 @@ $(subst %,%_MD5,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @cd / && tar axf $(DIR_DL)/$(DL_FILE) + cp $(DIR_SRC)/config/rpi-firmware/config.txt /boot @$(POSTBUILD) diff --git a/make.sh b/make.sh index 0e0192c..e02365f 100755 --- a/make.sh +++ b/make.sh @@ -422,7 +422,7 @@ buildipfire() { else # arm-omap kernel build ipfiremake linux KCFG="-rpi" -# ipfiremake v4l-dvb KCFG="-rpi" + ipfiremake v4l-dvb KCFG="-rpi" # ipfiremake kvm-kmod KCFG="-rpi" # ipfiremake mISDN KCFG="-rpi" ipfiremake cryptodev KCFG="-rpi" @@ -449,7 +449,7 @@ buildipfire() {

# arm-kirkwood kernel build ipfiremake linux KCFG="-kirkwood" -# ipfiremake v4l-dvb KCFG="-kirkwood" + ipfiremake v4l-dvb KCFG="-kirkwood" # ipfiremake kvm-kmod KCFG="-kirkwood" # ipfiremake mISDN KCFG="-kirkwood" ipfiremake cryptodev KCFG="-kirkwood"

hooks/post-receive -- IPFire 2.x development tree