[IPFire-SCM] [git.ipfire.org] IPFire 2.x development tree branch, kernel-update, updated. 3e011c27dde3276f23cda5197f18144bba078173
This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree".
The branch, kernel-update has been updated via 3e011c27dde3276f23cda5197f18144bba078173 (commit) via 1f6abd5362d74f585bdaf26bd9dea71905130e7c (commit) via fddc02a51a9b1c484a6e3c2073adf22dbba8bbac (commit) via e516f073d61d528068aa138665ab5c7a03b11165 (commit) via 15eb7e0a7f984482b8a8ec58131c8797dfe7537a (commit) via a832f4f33ef12cd4245b5d50bc98b05db2dae2ca (commit) via 3648650e7628193cf271c984e7fcafa7dd59fe04 (commit) via 1346863ac7cbf67b38d6209a6b0ab3bab565386c (commit) via 6105282debd636dd5634f6e487afbeb02b51a69b (commit) via e70bd5b7423a0e29248d0084fd04973c06ae8202 (commit) via e98e3852ca6bdb6975f5faa4267541054d21033c (commit) via 8e148dc343c0a313568cc8a8c140090f93817b23 (commit) via aa7afd463d24edbefe34f6f57a39345777cb89e2 (commit) via 7b82e244887c5803ab333c1dac3fcba03044ab05 (commit) via 4bd2536f4b2da867a96c53b79320874793231002 (commit) via a18da317d3b9802572f2f174d1b76a1eba7ff53b (commit) via c7c8b4aaecc68b12fa3ad89d2eabe82581b969ad (commit) via db083dd81ece9a52f1badc189d34f89b228a28c0 (commit) via 58574e318b594d471a6c9376ade91d7f7c6f4644 (commit) via dc7239d678ca426485814c95060ac72d987b814d (commit) via 8074eed711092b90ae279fa968545a27d2655fd6 (commit) via 68eeed828507c6edc395772d6d9c81f1cc12dd53 (commit) via d66d6f88273637d34b649184543862f588a7d9e3 (commit) via 36585d00bd91bb7207627ca4e46c5d3c6f20cd26 (commit) via 8f6a5178e816689fc6bd38aebfc0cfc41aa5d37d (commit) via 54798036675c0eebb8dedb55d2e509d8385cc363 (commit) via a6f4183e83385cbd21d31db07171fb7109b81d54 (commit) via 75c2cf6f51d4f7d8e513b6df6a25b30e8a834f9f (commit) from 9007007b4ef870fbc115851d7bd53dff771e9415 (commit)
Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.
- Log ----------------------------------------------------------------- commit 3e011c27dde3276f23cda5197f18144bba078173 Author: Arne Fitzenreiter arne_f@ipfire.org Date: Sun Jun 10 11:16:57 2012 +0200
flashimages: switch to single ext4 (wo journal)
also support video out on pandaboard.
commit 1f6abd5362d74f585bdaf26bd9dea71905130e7c Author: Arne Fitzenreiter arne_f@ipfire.org Date: Sun Jun 10 11:13:59 2012 +0200
kernel: updated omap and rpi kernel to 2.6.42.19 (aka 3.2.19).
commit fddc02a51a9b1c484a6e3c2073adf22dbba8bbac Merge: 9007007 e516f07 Author: Arne Fitzenreiter arne_f@ipfire.org Date: Sat Jun 2 10:25:02 2012 +0200
Merge remote-tracking branch 'origin/next' into kernel-update
-----------------------------------------------------------------------
Summary of changes: config/kernel/kernel.config.armv5tel-ipfire-omap | 647 ++++++++++++-------- config/kernel/kernel.config.armv5tel-ipfire-rpi | 475 +++++++++------ config/rootfiles/common/armv5tel/linux-omap | 6 +- config/rootfiles/common/armv5tel/linux-rpi | 6 +- config/rootfiles/core/59/update.sh | 4 + config/rootfiles/core/{55 => 60}/exclude | 0 config/rootfiles/core/{55 => 60}/filelists/files | 0 .../rootfiles/core/{53 => 60}/filelists/strongswan | 0 config/rootfiles/core/{52 => 60}/meta | 0 config/rootfiles/core/{59 => 60}/update.sh | 7 +- config/rootfiles/core/{55 => 61}/exclude | 0 config/rootfiles/core/{54 => 61}/filelists/GeoIP | 0 .../rootfiles/core/{58 => 61}/filelists/Net-Telnet | 0 config/rootfiles/core/{58 => 61}/filelists/files | 2 +- config/rootfiles/core/{52 => 61}/meta | 0 config/rootfiles/core/{59 => 61}/update.sh | 6 +- config/rootfiles/packages/mtr | 2 + config/rootfiles/packages/tcpick | 3 + config/u-boot/boot.scr | Bin 300 -> 322 bytes config/u-boot/boot.script | 2 +- html/cgi-bin/index.cgi | 2 +- html/cgi-bin/ovpnmain.cgi | 4 + langs/de/cgi-bin/de.pl | 2 +- langs/en/cgi-bin/en.pl | 4 + langs/es/cgi-bin/es.pl | 4 + langs/fr/cgi-bin/fr.pl | 4 + langs/pl/cgi-bin/pl.pl | 4 + langs/ru/cgi-bin/ru.pl | 4 + lfs/flash-images | 54 +- lfs/linux-rpi | 264 -------- lfs/linux3 | 56 +- lfs/{joe => mtr} | 9 +- lfs/strongswan | 4 +- lfs/{iftop => tcpick} | 8 +- make.sh | 8 +- src/initscripts/init.d/collectd | 11 +- src/initscripts/init.d/fsresize | 25 +- src/initscripts/init.d/partresize | 8 +- src/patches/linux-2.6.40-pandaboard-dvi720p.patch | 51 -- src/patches/linux-2.6.40-pandaboard-i2c-fix.patch | 22 - src/patches/linux-2.6.40-pandaboard-memcpy.patch | 21 - .../linux-2.6.40-pandaboard-rtc-twl-irq.patch | 27 - src/patches/linux-2.6.40-pandaboard-wlan-fix.patch | 12 - src/patches/linux-3.2-0001-panda-wlan-fix.patch | 12 + src/patches/linux-3.2-0002-panda-i2c.patch | 51 ++ src/patches/linux-3.2-bcm2835-alsamixer.patch | 48 ++ src/patches/linux-3.2-bcm2835-limit_volume.patch | 12 + .../{linux-3.1-imq.patch => linux-3.2-imq.patch} | 166 +++--- ...d-reboot.patch => linux-3.2-panda-reboot.patch} | 0 49 files changed, 1015 insertions(+), 1042 deletions(-) copy config/rootfiles/core/{55 => 60}/exclude (100%) copy config/rootfiles/core/{55 => 60}/filelists/files (100%) copy config/rootfiles/core/{53 => 60}/filelists/strongswan (100%) copy config/rootfiles/core/{52 => 60}/meta (100%) copy config/rootfiles/core/{59 => 60}/update.sh (96%) copy config/rootfiles/core/{55 => 61}/exclude (100%) copy config/rootfiles/core/{54 => 61}/filelists/GeoIP (100%) copy config/rootfiles/core/{58 => 61}/filelists/Net-Telnet (100%) copy config/rootfiles/core/{58 => 61}/filelists/files (85%) copy config/rootfiles/core/{52 => 61}/meta (100%) copy config/rootfiles/core/{59 => 61}/update.sh (96%) create mode 100644 config/rootfiles/packages/mtr create mode 100644 config/rootfiles/packages/tcpick delete mode 100644 lfs/linux-rpi copy lfs/{joe => mtr} (96%) copy lfs/{iftop => tcpick} (96%) delete mode 100755 src/patches/linux-2.6.40-pandaboard-dvi720p.patch delete mode 100755 src/patches/linux-2.6.40-pandaboard-i2c-fix.patch delete mode 100644 src/patches/linux-2.6.40-pandaboard-memcpy.patch delete mode 100644 src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch delete mode 100755 src/patches/linux-2.6.40-pandaboard-wlan-fix.patch mode change 100755 => 100644 src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch create mode 100644 src/patches/linux-3.2-0001-panda-wlan-fix.patch create mode 100644 src/patches/linux-3.2-0002-panda-i2c.patch create mode 100644 src/patches/linux-3.2-bcm2835-alsamixer.patch create mode 100644 src/patches/linux-3.2-bcm2835-limit_volume.patch copy src/patches/{linux-3.1-imq.patch => linux-3.2-imq.patch} (90%) rename src/patches/{linux-2.6.40-pandaboard-reboot.patch => linux-3.2-panda-reboot.patch} (100%)
Difference in files: diff --git a/config/kernel/kernel.config.armv5tel-ipfire-omap b/config/kernel/kernel.config.armv5tel-ipfire-omap index 5680114..eb8c18a 100644 --- a/config/kernel/kernel.config.armv5tel-ipfire-omap +++ b/config/kernel/kernel.config.armv5tel-ipfire-omap @@ -1,6 +1,6 @@ # -# Automatically generated make config: don't edit -# Linux/arm 2.6.40.26-ipfire-omap Kernel Configuration +# Automatically generated file; DO NOT EDIT. +# Linux/arm 2.6.42.19-ipfire-omap Kernel Configuration # CONFIG_ARM=y CONFIG_HAVE_PWM=y @@ -25,6 +25,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y
@@ -62,6 +63,7 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y CONFIG_SPARSE_IRQ=y
# @@ -94,7 +96,7 @@ CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EXPERT=y @@ -156,6 +158,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y # CONFIG_BLK_DEV_INTEGRITY is not set
# @@ -210,9 +213,11 @@ CONFIG_MMU=y # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_HIGHBANK is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_PRIMA2 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -228,15 +233,14 @@ CONFIG_MMU=y # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_PICOXCELL is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set @@ -248,7 +252,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_EXYNOS4 is not set +# CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_TCC_926 is not set # CONFIG_ARCH_U300 is not set @@ -258,6 +262,7 @@ CONFIG_MMU=y CONFIG_ARCH_OMAP=y # CONFIG_PLAT_SPEAR is not set # CONFIG_ARCH_VT8500 is not set +# CONFIG_ARCH_ZYNQ is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set
@@ -284,7 +289,6 @@ CONFIG_OMAP_32K_TIMER=y # CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -# CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y CONFIG_MACH_OMAP_GENERIC=y
@@ -336,6 +340,7 @@ CONFIG_MACH_OMAP_ZOOM2=y CONFIG_MACH_OMAP_ZOOM3=y CONFIG_MACH_CM_T35=y CONFIG_MACH_CM_T3517=y +CONFIG_MACH_CM_T3730=y CONFIG_MACH_IGEP0020=y CONFIG_MACH_IGEP0030=y CONFIG_MACH_SBC3530=y @@ -386,6 +391,7 @@ CONFIG_OUTER_CACHE_SYNC=y CONFIG_CACHE_L2X0=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_DMA_MEM_BUFFERABLE=y +# CONFIG_ARM_ERRATA_326103 is not set CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y @@ -399,6 +405,8 @@ CONFIG_ARM_ERRATA_743622=y # CONFIG_ARM_ERRATA_751472 is not set CONFIG_ARM_ERRATA_754322=y CONFIG_ARM_ERRATA_754327=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_PL310_ERRATA_769419=y CONFIG_ARM_GIC=y
# @@ -407,8 +415,6 @@ CONFIG_ARM_GIC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -CONFIG_ARM_ERRATA_764369=y -CONFIG_PL310_ERRATA_769419=y
# # Kernel Features @@ -419,6 +425,9 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y CONFIG_HAVE_ARM_SCU=y CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y @@ -469,6 +478,7 @@ CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_USE_OF=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ARM_APPENDED_DTB is not set CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -520,8 +530,10 @@ CONFIG_PM=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_HAS_OPP=y CONFIG_PM_OPP=y -CONFIG_PM_RUNTIME_CLK=y +CONFIG_PM_CLK=y +CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y CONFIG_NET=y
# @@ -727,6 +739,7 @@ CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m CONFIG_IP_SET_HASH_NET=m CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m CONFIG_IP_VS_IPV6=y @@ -887,6 +900,7 @@ CONFIG_LLC=m # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m CONFIG_NET_SCHED=y
# @@ -1067,6 +1081,8 @@ CONFIG_CAIF=m CONFIG_CAIF_NETDEV=m CONFIG_CEPH_LIB=m # CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +# CONFIG_NFC is not set
# # Device Drivers @@ -1085,13 +1101,14 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=m CONFIG_CONNECTOR=m CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set CONFIG_MTD_TESTS=m # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_OF_PARTS=m CONFIG_MTD_AR7_PARTS=m
# @@ -1151,6 +1168,7 @@ CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_DOCG3 is not set CONFIG_MTD_NAND_ECC=m # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND is not set @@ -1191,6 +1209,7 @@ CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m @@ -1207,7 +1226,7 @@ CONFIG_MG_DISK_RES=0 # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set -# CONFIG_INTEL_MID_PTI is not set +# CONFIG_ATMEL_PWM is not set CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m # CONFIG_APDS9802ALS is not set @@ -1220,6 +1239,7 @@ CONFIG_SENSORS_TSL2550=m # CONFIG_HMC6352 is not set CONFIG_DS1682=m # CONFIG_BMP085 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set CONFIG_C2PORT=m
# @@ -1238,8 +1258,11 @@ CONFIG_IWMC3200TOP=m # CONFIG_TI_ST=m # CONFIG_SENSORS_LIS3_I2C is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set
# # SCSI device support @@ -1322,6 +1345,7 @@ CONFIG_PATA_ARASAN_CF=m # PIO-only SFF controllers # CONFIG_PATA_PLATFORM=m +CONFIG_PATA_OF_PLATFORM=m
# # Generic fallback / legacy drivers @@ -1338,8 +1362,13 @@ CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +# CONFIG_DM_DEBUG_SPACE_MAPS is not set CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_LOG_USERSPACE=m @@ -1352,11 +1381,9 @@ CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y -CONFIG_IFB=m -CONFIG_DUMMY=m +CONFIG_NET_CORE=y CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m +CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_IMQ=m # CONFIG_IMQ_BEHAVIOR_AA is not set @@ -1364,9 +1391,68 @@ CONFIG_IMQ_BEHAVIOR_AB=y # CONFIG_IMQ_BEHAVIOR_BA is not set # CONFIG_IMQ_BEHAVIOR_BB is not set CONFIG_IMQ_NUM_DEVS=2 +CONFIG_MII=m +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKEHARD=m +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set CONFIG_TUN=m CONFIG_VETH=m -CONFIG_MII=m +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +CONFIG_ATM_TCP=m + +# +# CAIF transport drivers +# +CONFIG_CAIF_TTY=m +CONFIG_CAIF_SPI_SLAVE=m +# CONFIG_CAIF_SPI_SYNC is not set +CONFIG_CAIF_HSI=m +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_BROADCOM=y +CONFIG_B44=m +CONFIG_NET_VENDOR_CHELSIO=y +CONFIG_DM9000=m +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +CONFIG_DNET=m +CONFIG_NET_VENDOR_DLINK=y +CONFIG_DE600=m +CONFIG_DE620=m +CONFIG_NET_VENDOR_FARADAY=y +# CONFIG_FTMAC100 is not set +# CONFIG_FTGMAC100 is not set +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_NET_VENDOR_MICREL=y +CONFIG_KS8842=m +CONFIG_KS8851_MLL=m +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_8390=y +CONFIG_AX88796=m +# CONFIG_AX88796_93CX6 is not set +CONFIG_ETHOC=m +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_SEEQ8005=m +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=m +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_DA is not set +CONFIG_STMMAC_RING=y +# CONFIG_STMMAC_CHAINED is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_DAVINCI_EMAC is not set +# CONFIG_TI_DAVINCI_MDIO is not set +# CONFIG_TI_DAVINCI_CPDMA is not set CONFIG_PHYLIB=y
# @@ -1389,40 +1475,60 @@ CONFIG_MICREL_PHY=m # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=m CONFIG_MDIO_GPIO=m -CONFIG_NET_ETHERNET=y -CONFIG_AX88796=m -# CONFIG_AX88796_93CX6 is not set -CONFIG_SMC91X=m -# CONFIG_TI_DAVINCI_EMAC is not set -# CONFIG_TI_DAVINCI_MDIO is not set -# CONFIG_TI_DAVINCI_CPDMA is not set -CONFIG_DM9000=m -CONFIG_DM9000_DEBUGLEVEL=4 -# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set -CONFIG_ETHOC=m -CONFIG_SMC911X=m -CONFIG_SMSC911X=m -# CONFIG_SMSC911X_ARCH_HOOKS is not set -CONFIG_DNET=m -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_B44=m -CONFIG_KS8842=m -CONFIG_KS8851_MLL=m -CONFIG_NET_POCKET=y -CONFIG_DE600=m -CONFIG_DE620=m -CONFIG_FTMAC100=m -CONFIG_NETDEV_1000=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_DA is not set -# CONFIG_STMMAC_DUAL_MAC is not set -CONFIG_NETDEV_10000=y +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +# CONFIG_USB_IPHETH is not set +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m CONFIG_WLAN=y CONFIG_LIBERTAS_THINFIRM=m # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set @@ -1444,11 +1550,18 @@ CONFIG_ATH9K_HTC=m CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y CONFIG_CARL9170_WPC=y +CONFIG_CARL9170_HWRNG=y +CONFIG_ATH6KL=m +# CONFIG_ATH6KL_DEBUG is not set CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y CONFIG_B43_SDIO=y +CONFIG_B43_BCMA_PIO=y CONFIG_B43_PIO=y CONFIG_B43_PHY_N=y CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y # CONFIG_B43_DEBUG is not set @@ -1461,6 +1574,9 @@ CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMFMAC=m +# CONFIG_BRCMDBG is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set @@ -1488,7 +1604,6 @@ CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set -CONFIG_RTL8192SE=m CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m CONFIG_RTL8192C_COMMON=m @@ -1496,7 +1611,6 @@ CONFIG_WL1251=m CONFIG_WL1251_SDIO=m CONFIG_WL12XX_MENU=m CONFIG_WL12XX=m -# CONFIG_WL12XX_HT is not set CONFIG_WL12XX_SDIO=m # CONFIG_WL12XX_SDIO_TEST is not set CONFIG_WL12XX_PLATFORM_DATA=y @@ -1508,42 +1622,6 @@ CONFIG_MWIFIEX_SDIO=m # # Enable WiMAX (Networking options) to see the WiMAX drivers # - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -# CONFIG_USB_IPHETH is not set -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m CONFIG_WAN=y CONFIG_HDLC=m CONFIG_HDLC_RAW=m @@ -1557,39 +1635,6 @@ CONFIG_HDLC_PPP=m # CONFIG_DLCI=m CONFIG_DLCI_MAX=8 -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -CONFIG_ATM_TCP=m -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKEHARD=m - -# -# CAIF transport drivers -# -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -# CONFIG_CAIF_SPI_SYNC is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOATM=m -CONFIG_PPPOL2TP=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLHC=m -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set CONFIG_ISDN=y CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y @@ -1736,14 +1781,18 @@ CONFIG_KEYBOARD_XTKBD=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set -CONFIG_INPUT_ATI_REMOTE=m +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_TWL4030_PWRBUTTON=m CONFIG_INPUT_TWL4030_VIBRA=m +CONFIG_INPUT_TWL6040_VIBRA=m # CONFIG_INPUT_UINPUT is not set CONFIG_INPUT_PCF50633_PMU=m CONFIG_INPUT_PCF8574=m @@ -1770,6 +1819,7 @@ CONFIG_SERIO_PS2MULT=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y @@ -1793,6 +1843,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=m
# # Non-8250 serial port support @@ -1851,7 +1902,7 @@ CONFIG_I2C_ALGOPCA=m # # I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C_DESIGNWARE=m +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set CONFIG_I2C_GPIO=m CONFIG_I2C_OCORES=m CONFIG_I2C_OMAP=y @@ -1890,6 +1941,7 @@ CONFIG_PPS=m CONFIG_PPS_CLIENT_KTIMER=m CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m
# # PPS generators support @@ -1904,13 +1956,13 @@ CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_GENERIC=m CONFIG_GPIO_MAX730X=m
# # Memory mapped GPIO drivers: # -CONFIG_GPIO_BASIC_MMIO_CORE=m -CONFIG_GPIO_BASIC_MMIO=m +CONFIG_GPIO_GENERIC_PLATFORM=m CONFIG_GPIO_IT8761E=m
# @@ -1930,6 +1982,7 @@ CONFIG_GPIO_ADP5588=m # # SPI GPIO expanders: # +CONFIG_GPIO_MCP23S08=m
# # AC97 GPIO expanders: @@ -2033,22 +2086,28 @@ CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4245=m CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m CONFIG_SENSORS_MAX16064=m CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m CONFIG_SENSORS_SMM665=m @@ -2059,7 +2118,9 @@ CONFIG_SENSORS_EMC6W201=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_AMC6821=m @@ -2081,12 +2142,14 @@ CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_THERMAL=y CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set
# # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m +# CONFIG_DW_WATCHDOG is not set CONFIG_MPCORE_WATCHDOG=m CONFIG_OMAP_WATCHDOG=m CONFIG_TWL4030_WATCHDOG=m @@ -2113,8 +2176,12 @@ CONFIG_BCMA_POSSIBLE=y # Broadcom specific AMBA # CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y # CONFIG_BCMA_DEBUG is not set -CONFIG_MFD_SUPPORT=y + +# +# Multifunction device drivers +# CONFIG_MFD_CORE=y # CONFIG_MFD_88PM860X is not set CONFIG_MFD_SM501=m @@ -2127,12 +2194,15 @@ CONFIG_HTC_PASIC3=m CONFIG_TPS65010=m # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set CONFIG_MENELAUS=y CONFIG_TWL4030_CORE=y CONFIG_TWL4030_MADC=m CONFIG_TWL4030_POWER=y -CONFIG_TWL4030_CODEC=y +CONFIG_MFD_TWL4030_AUDIO=y CONFIG_TWL6030_PWM=m +CONFIG_TWL6040_CORE=y # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set @@ -2154,13 +2224,14 @@ CONFIG_PCF50633_GPIO=m # CONFIG_ABX500_CORE is not set CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_OMAP_USB_HOST=y -# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_AAT2870_CORE is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_DUMMY is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_GPIO is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set @@ -2184,6 +2255,7 @@ CONFIG_MEDIA_SUPPORT=m CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_DVB_CORE=m +CONFIG_DVB_NET=y CONFIG_VIDEO_MEDIA=m
# @@ -2198,7 +2270,9 @@ CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m CONFIG_IR_RC5_SZ_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_LIRC_CODEC=m +CONFIG_RC_ATI_REMOTE=m # CONFIG_IR_IMON is not set # CONFIG_IR_MCEUSB is not set # CONFIG_IR_REDRAT3 is not set @@ -2220,6 +2294,7 @@ CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m @@ -2236,6 +2311,7 @@ CONFIG_VIDEO_TUNER=m CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_DMA_CONTIG=m +CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set @@ -2310,6 +2386,11 @@ CONFIG_VIDEO_CX2341X=m # CONFIG_VIDEO_OV7670 is not set # CONFIG_VIDEO_MT9V011 is not set # CONFIG_VIDEO_TCM825X is not set +CONFIG_VIDEO_SR030PC30=m + +# +# Flash devices +#
# # Video improvement chips @@ -2331,8 +2412,6 @@ CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_TIMBERDALE=m CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_NOON010PC30=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_IMX074=m CONFIG_SOC_CAMERA_MT9M001=m @@ -2344,6 +2423,7 @@ CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_TW9910=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_SOC_CAMERA_OV2640=m +CONFIG_SOC_CAMERA_OV5642=m CONFIG_SOC_CAMERA_OV6650=m CONFIG_SOC_CAMERA_OV772X=m CONFIG_SOC_CAMERA_OV9640=m @@ -2355,49 +2435,51 @@ CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_GL860 is not set -# CONFIG_USB_GSPCA_BENQ is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_CPIA1 is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_JEILINJ is not set -# CONFIG_USB_GSPCA_KINECT is not set -# CONFIG_USB_GSPCA_KONICA is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_NW80X is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_OV534_9 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7302 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SN9C2028 is not set -# CONFIG_USB_GSPCA_SN9C20X is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SPCA1528 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_SQ930X is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_STV0680 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_VICAM is not set -# CONFIG_USB_GSPCA_XIRLINK_CIT is not set -# CONFIG_USB_GSPCA_ZC3XX is not set +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y @@ -2406,11 +2488,13 @@ CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_EM28XX=m # CONFIG_VIDEO_EM28XX_ALSA is not set CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=y CONFIG_VIDEO_TLG2300=m CONFIG_VIDEO_CX231XX=m CONFIG_VIDEO_CX231XX_RC=y CONFIG_VIDEO_CX231XX_ALSA=m CONFIG_VIDEO_CX231XX_DVB=m +# CONFIG_VIDEO_TM6000 is not set CONFIG_VIDEO_USBVISION=m CONFIG_USB_ET61X251=m CONFIG_USB_SN9C102=m @@ -2439,7 +2523,7 @@ CONFIG_RADIO_WL128X=m CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set +CONFIG_TTPCI_EEPROM=m
# # Supported USB Adapters @@ -2466,6 +2550,7 @@ CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_ANYSEE=m @@ -2477,6 +2562,8 @@ CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_IT913X=m +CONFIG_DVB_USB_MXL111SF=m CONFIG_SMS_SIANO_MDTV=m
# @@ -2504,6 +2591,12 @@ CONFIG_DVB_STV090x=m CONFIG_DVB_STV6110x=m
# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m + +# # DVB-S (satellite) frontends # CONFIG_DVB_MT312=m @@ -2518,6 +2611,7 @@ CONFIG_DVB_TDA826X=m CONFIG_DVB_CX24116=m CONFIG_DVB_SI21XX=m CONFIG_DVB_DS3000=m +CONFIG_DVB_TDA10071=m
# # DVB-T (terrestrial) frontends @@ -2569,10 +2663,13 @@ CONFIG_DVB_TUNER_DIB0090=m # SEC control devices for DVB-S # CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m CONFIG_DVB_LGS8GXX=m CONFIG_DVB_ATBM8830=m CONFIG_DVB_IX2505V=m +CONFIG_DVB_IT913X_FE=m
# # Tools to develop new frontends @@ -2582,24 +2679,23 @@ CONFIG_DVB_IX2505V=m # # Graphics support # -CONFIG_DRM=m +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_WMT_GE_ROPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -2609,32 +2705,57 @@ CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # -CONFIG_FB_UVESA=m +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set -CONFIG_FB_TMIO=m -CONFIG_FB_TMIO_ACCELL=y -CONFIG_FB_SM501=m +# CONFIG_FB_TMIO is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_VIRTUAL is not set -CONFIG_FB_METRONOME=m +# CONFIG_FB_METRONOME is not set # CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_OMAP is not set -# CONFIG_FB_OMAP_LCD_VGA is not set -# CONFIG_OMAP2_DSS is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=32 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set +CONFIG_OMAP2_DSS_DPI=y +# CONFIG_OMAP2_DSS_RFBI is not set +# CONFIG_OMAP2_DSS_VENC is not set +CONFIG_OMAP4_DSS_HDMI=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC_DPI=y +CONFIG_PANEL_DVI=y +CONFIG_PANEL_SHARP_LS037V7DW01=y +# CONFIG_PANEL_PICODLP is not set +CONFIG_PANEL_TAAL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -# CONFIG_BACKLIGHT_PWM is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_PCF50633 is not set +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=m +CONFIG_BACKLIGHT_ADP8860=m +CONFIG_BACKLIGHT_ADP8870=m +CONFIG_BACKLIGHT_PCF50633=m
# # Display device support # -CONFIG_DISPLAY_SUPPORT=m +CONFIG_DISPLAY_SUPPORT=y
# # Display hardware drivers @@ -2645,11 +2766,19 @@ CONFIG_DISPLAY_SUPPORT=m # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set +CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y @@ -2709,6 +2838,7 @@ CONFIG_SND_OMAP_SOC_OMAP3EVM=m CONFIG_SND_OMAP_SOC_AM3517EVM=m CONFIG_SND_OMAP_SOC_SDP3430=m CONFIG_SND_OMAP_SOC_SDP4430=m +# CONFIG_SND_OMAP_SOC_OMAP4_HDMI is not set CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=m CONFIG_SND_OMAP_SOC_ZOOM2=m @@ -2718,6 +2848,8 @@ CONFIG_SND_SOC_ALL_CODECS=m CONFIG_SND_SOC_WM_HUBS=m CONFIG_SND_SOC_AD193X=m CONFIG_SND_SOC_AD73311=m +CONFIG_SND_SOC_ADAU1373=m +CONFIG_SND_SOC_ADAV80X=m CONFIG_SND_SOC_ADS117X=m CONFIG_SND_SOC_AK4535=m CONFIG_SND_SOC_AK4641=m @@ -2728,6 +2860,7 @@ CONFIG_SND_SOC_CS42L51=m CONFIG_SND_SOC_CS4270=m CONFIG_SND_SOC_CS4271=m CONFIG_SND_SOC_CX20442=m +CONFIG_SND_SOC_JZ4740_CODEC=m CONFIG_SND_SOC_L3=m CONFIG_SND_SOC_DA7210=m CONFIG_SND_SOC_DFBMCS320=m @@ -2735,11 +2868,13 @@ CONFIG_SND_SOC_MAX98088=m CONFIG_SND_SOC_MAX98095=m CONFIG_SND_SOC_MAX9850=m CONFIG_SND_SOC_PCM3008=m +CONFIG_SND_SOC_RT5631=m CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_SSM2602=m +CONFIG_SND_SOC_STA32X=m CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TVL320AIC32X4=m +CONFIG_SND_SOC_TLV320AIC32X4=m CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_TLV320DAC33=m CONFIG_SND_SOC_TWL4030=m @@ -2748,6 +2883,7 @@ CONFIG_SND_SOC_UDA134X=m CONFIG_SND_SOC_UDA1380=m CONFIG_SND_SOC_WL1273=m CONFIG_SND_SOC_WM1250_EV1=m +CONFIG_SND_SOC_WM5100=m CONFIG_SND_SOC_WM8400=m CONFIG_SND_SOC_WM8510=m CONFIG_SND_SOC_WM8523=m @@ -2761,11 +2897,11 @@ CONFIG_SND_SOC_WM8741=m CONFIG_SND_SOC_WM8750=m CONFIG_SND_SOC_WM8753=m CONFIG_SND_SOC_WM8776=m +CONFIG_SND_SOC_WM8782=m CONFIG_SND_SOC_WM8804=m CONFIG_SND_SOC_WM8900=m CONFIG_SND_SOC_WM8903=m CONFIG_SND_SOC_WM8904=m -CONFIG_SND_SOC_WM8915=m CONFIG_SND_SOC_WM8940=m CONFIG_SND_SOC_WM8955=m CONFIG_SND_SOC_WM8960=m @@ -2774,12 +2910,14 @@ CONFIG_SND_SOC_WM8962=m CONFIG_SND_SOC_WM8971=m CONFIG_SND_SOC_WM8974=m CONFIG_SND_SOC_WM8978=m +CONFIG_SND_SOC_WM8983=m CONFIG_SND_SOC_WM8985=m CONFIG_SND_SOC_WM8988=m CONFIG_SND_SOC_WM8990=m CONFIG_SND_SOC_WM8991=m CONFIG_SND_SOC_WM8993=m CONFIG_SND_SOC_WM8995=m +CONFIG_SND_SOC_WM8996=m CONFIG_SND_SOC_WM9081=m CONFIG_SND_SOC_LM4857=m CONFIG_SND_SOC_MAX9877=m @@ -2819,6 +2957,7 @@ CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y # CONFIG_HID_EMS_FF is not set CONFIG_HID_EZKEY=m +# CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set CONFIG_HID_KYE=m # CONFIG_HID_UCLOGIC is not set @@ -2828,10 +2967,11 @@ CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m # CONFIG_HID_LCPOWER is not set CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y # CONFIG_LOGIG940_FF is not set -# CONFIG_LOGIWII_FF is not set +CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m # CONFIG_HID_MULTITOUCH is not set @@ -2841,15 +2981,12 @@ CONFIG_HID_PANTHERLORD=m CONFIG_PANTHERLORD_FF=y CONFIG_HID_PETALYNX=m # CONFIG_HID_PICOLCD is not set +CONFIG_HID_PRIMAX=m # CONFIG_HID_QUANTA is not set # CONFIG_HID_ROCCAT is not set -# CONFIG_HID_ROCCAT_ARVO is not set -# CONFIG_HID_ROCCAT_KONE is not set -# CONFIG_HID_ROCCAT_KONEPLUS is not set -# CONFIG_HID_ROCCAT_KOVAPLUS is not set -# CONFIG_HID_ROCCAT_PYRA is not set CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m +CONFIG_HID_SPEEDLINK=m CONFIG_HID_SUNPLUS=m CONFIG_HID_GREENASIA=m CONFIG_GREENASIA_FF=y @@ -2862,9 +2999,11 @@ CONFIG_HID_ZEROPLUS=m CONFIG_ZEROPLUS_FF=y # CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB_ARCH_HAS_XHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -2879,6 +3018,7 @@ CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_DWC3 is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -2891,8 +3031,8 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_HCD_OMAP=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -2901,12 +3041,10 @@ CONFIG_USB_OHCI_HCD_OMAP3=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_SL811_HCD_ISO is not set -CONFIG_USB_R8A66597_HCD=m +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set
# # USB Device Class drivers @@ -2926,6 +3064,7 @@ CONFIG_USB_TMC=m CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y # CONFIG_USB_STORAGE_DATAFAB is not set CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m @@ -3046,7 +3185,7 @@ CONFIG_USB_GPIO_VBUS=m # CONFIG_USB_ULPI is not set CONFIG_TWL4030_USB=m CONFIG_TWL6030_USB=m -CONFIG_NOP_USB_XCEIV=m +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -3065,12 +3204,12 @@ CONFIG_MMC_TEST=m # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_OF=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -CONFIG_MMC_DW=m -# CONFIG_MMC_DW_IDMAC is not set +# CONFIG_MMC_DW is not set CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m CONFIG_MEMSTICK=m @@ -3095,8 +3234,6 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=m # CONFIG_LEDS_PCA9532_GPIO is not set CONFIG_LEDS_GPIO=m -CONFIG_LEDS_GPIO_PLATFORM=y -CONFIG_LEDS_GPIO_OF=y CONFIG_LEDS_LP3944=m # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set @@ -3105,6 +3242,7 @@ CONFIG_LEDS_PCA955X=m # CONFIG_LEDS_REGULATOR is not set CONFIG_LEDS_BD2802=m # CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_RENESAS_TPU is not set CONFIG_LEDS_TRIGGERS=y
# @@ -3119,7 +3257,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # -# CONFIG_NFC_DEVICES is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -3206,17 +3343,22 @@ CONFIG_ASYNC_TX_DMA=y CONFIG_UIO=m CONFIG_UIO_PDRV=m CONFIG_UIO_PDRV_GENIRQ=m + +# +# Virtio drivers +# +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set CONFIG_STAGING=y -# CONFIG_VIDEO_TM6000 is not set # CONFIG_USBIP_CORE is not set # CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set -# CONFIG_BRCMUTIL is not set # CONFIG_ASUS_OLED is not set # CONFIG_PANEL is not set CONFIG_R8712U=m -CONFIG_R8712_AP=y +CONFIG_RTS5139=m +# CONFIG_RTS5139_DEBUG is not set # CONFIG_TRANZPORT is not set # CONFIG_POHMELFS is not set # CONFIG_LINE6_USB is not set @@ -3227,28 +3369,7 @@ CONFIG_R8712_AP=y # CONFIG_XVMALLOC is not set # CONFIG_ZRAM is not set # CONFIG_FB_SM7XX is not set -# CONFIG_LIRC_STAGING is not set -# CONFIG_EASYCAP is not set # CONFIG_TIDSPBRIDGE is not set -# CONFIG_MACH_OMAP3_WESTBRIDGE_AST_PNAND_HAL is not set -CONFIG_MACH_NO_WESTBRIDGE=y -CONFIG_ATH6K_LEGACY=m -CONFIG_AR600x_SD31_XXX=y -# CONFIG_AR600x_WB31_XXX is not set -# CONFIG_AR600x_SD32_XXX is not set -# CONFIG_AR600x_CUSTOM_XXX is not set -CONFIG_ATH6KL_ENABLE_COEXISTENCE=y -CONFIG_AR600x_DUAL_ANTENNA=y -# CONFIG_AR600x_SINGLE_ANTENNA is not set -# CONFIG_AR600x_BT_QCOM is not set -# CONFIG_AR600x_BT_CSR is not set -CONFIG_AR600x_BT_AR3001=y -CONFIG_ATH6KL_HCI_BRIDGE=y -# CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET is not set -CONFIG_ATH6KL_HTC_RAW_INTERFACE=y -# CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER is not set -# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set -# CONFIG_ATH6KL_DEBUG is not set CONFIG_USB_ENESTORAGE=m # CONFIG_BCM_WIMAX is not set # CONFIG_FT1000 is not set @@ -3259,13 +3380,18 @@ CONFIG_USB_ENESTORAGE=m # CONFIG_SPEAKUP is not set # CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HWSPINLOCK=m
# -# Altera FPGA firmware download module +# Hardware Spinlock drivers # -# CONFIG_ALTERA_STAPL is not set -CONFIG_CLKDEV_LOOKUP=y -# CONFIG_HWSPINLOCK is not set +CONFIG_HWSPINLOCK_OMAP=m +CONFIG_CLKSRC_MMIO=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_VIRT_DRIVERS is not set +# CONFIG_PM_DEVFREQ is not set
# # File systems @@ -3419,7 +3545,6 @@ CONFIG_NFS_V4=y CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFS_USE_NEW_IDMAPPER is not set CONFIG_NFSD=m -CONFIG_NFSD_DEPRECATED=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y @@ -3547,7 +3672,7 @@ CONFIG_TIMER_STATS=y # CONFIG_PROVE_LOCKING is not set # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_KOBJECT is not set @@ -3592,12 +3717,12 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_ARM_UNWIND is not set # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_LL is not set -# CONFIG_OC_ETM is not set
# # Security options # CONFIG_KEYS=y +# CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set @@ -3629,6 +3754,7 @@ CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set @@ -3688,6 +3814,7 @@ CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -3732,10 +3859,11 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_CRC8=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=m +CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y @@ -3762,3 +3890,4 @@ CONFIG_CPU_RMAP=y CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_AVERAGE=y +CONFIG_CORDIC=m diff --git a/config/kernel/kernel.config.armv5tel-ipfire-rpi b/config/kernel/kernel.config.armv5tel-ipfire-rpi index b8bf4fc..c5a9062 100644 --- a/config/kernel/kernel.config.armv5tel-ipfire-rpi +++ b/config/kernel/kernel.config.armv5tel-ipfire-rpi @@ -1,9 +1,10 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 2.6.41.10 Kernel Configuration +# Linux/arm 2.6.42.18 Kernel Configuration # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_SCHED_CLOCK=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_USES_GETTIMEOFFSET is not set CONFIG_GENERIC_CLOCKEVENTS=y @@ -21,7 +22,9 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_NEED_MACH_MEMORY_H=y +CONFIG_GENERIC_BUG=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_HAVE_IRQ_WORK=y
@@ -89,7 +92,7 @@ CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EXPERT=y @@ -149,7 +152,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_BSGLIB=y # CONFIG_BLK_DEV_INTEGRITY is not set
# @@ -203,6 +206,7 @@ CONFIG_MMU=y # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_HIGHBANK is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set @@ -228,8 +232,8 @@ CONFIG_MMU=y # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_PICOXCELL is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set @@ -241,7 +245,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_EXYNOS4 is not set +# CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_TCC_926 is not set # CONFIG_ARCH_U300 is not set @@ -293,8 +297,10 @@ CONFIG_ARM_THUMB=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y +# CONFIG_ARM_ERRATA_326103 is not set CONFIG_ARM_ERRATA_411920=y # CONFIG_ARM_ERRATA_364296 is not set +CONFIG_PL330=y
# # Bus support @@ -353,6 +359,7 @@ CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_USE_OF=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ARM_APPENDED_DTB is not set CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=tty1 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p3 rootwait ro" CONFIG_CMDLINE_FROM_BOOTLOADER=y # CONFIG_CMDLINE_EXTEND is not set @@ -398,7 +405,9 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_APM_EMULATION is not set CONFIG_PM_CLK=y +CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y CONFIG_NET=y
# @@ -765,6 +774,7 @@ CONFIG_LLC=m # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set CONFIG_IEEE802154=m +CONFIG_IEEE802154_6LOWPAN=m CONFIG_NET_SCHED=y
# @@ -941,6 +951,7 @@ CONFIG_CAIF=m CONFIG_CAIF_NETDEV=m CONFIG_CEPH_LIB=m # CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set # CONFIG_NFC is not set
# @@ -962,11 +973,10 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_TESTS=m +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_OF_PARTS=m CONFIG_MTD_AR7_PARTS=m
# @@ -1029,6 +1039,7 @@ CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_DOCG3 is not set CONFIG_MTD_NAND_ECC=m # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND is not set @@ -1082,6 +1093,7 @@ CONFIG_MG_DISK_RES=0 # CONFIG_SENSORS_LIS3LV02D is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set +# CONFIG_ATMEL_PWM is not set # CONFIG_ICS932S401 is not set CONFIG_ENCLOSURE_SERVICES=m # CONFIG_APDS9802ALS is not set @@ -1117,9 +1129,12 @@ CONFIG_IWMC3200TOP=m CONFIG_TI_ST=m # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set CONFIG_BCM2708_VCHIQ=y -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set
# # SCSI device support @@ -1202,6 +1217,7 @@ CONFIG_SATA_MV=m # PIO-only SFF controllers # CONFIG_PATA_PLATFORM=m +CONFIG_PATA_OF_PLATFORM=m
# # Generic fallback / legacy drivers @@ -1217,8 +1233,13 @@ CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +# CONFIG_DM_DEBUG_SPACE_MAPS is not set CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_LOG_USERSPACE=m @@ -1231,11 +1252,9 @@ CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y -CONFIG_IFB=m -CONFIG_DUMMY=m +CONFIG_NET_CORE=y CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m +CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_IMQ=m # CONFIG_IMQ_BEHAVIOR_AA is not set @@ -1243,9 +1262,62 @@ CONFIG_IMQ_BEHAVIOR_AB=y # CONFIG_IMQ_BEHAVIOR_BA is not set # CONFIG_IMQ_BEHAVIOR_BB is not set CONFIG_IMQ_NUM_DEVS=2 +CONFIG_MII=m +# CONFIG_IEEE802154_DRIVERS is not set +CONFIG_IFB=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set CONFIG_TUN=m CONFIG_VETH=m -CONFIG_MII=m +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +CONFIG_ATM_TCP=m + +# +# CAIF transport drivers +# +# CONFIG_CAIF_TTY is not set +# CONFIG_CAIF_SPI_SLAVE is not set +# CONFIG_CAIF_HSI is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_BROADCOM=y +CONFIG_B44=m +CONFIG_NET_VENDOR_CHELSIO=y +CONFIG_DM9000=m +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +CONFIG_DNET=m +CONFIG_NET_VENDOR_FARADAY=y +# CONFIG_FTMAC100 is not set +# CONFIG_FTGMAC100 is not set +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +CONFIG_KS8851_MLL=m +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_8390=y +CONFIG_AX88796=m +# CONFIG_AX88796_93CX6 is not set +CONFIG_ETHOC=m +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_SEEQ8005=m +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=m +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_DA is not set +CONFIG_STMMAC_RING=y +# CONFIG_STMMAC_CHAINED is not set CONFIG_PHYLIB=y
# @@ -1268,37 +1340,59 @@ CONFIG_MICREL_PHY=m # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=m # CONFIG_MDIO_GPIO is not set -CONFIG_NET_ETHERNET=y -CONFIG_AX88796=m -# CONFIG_AX88796_93CX6 is not set -CONFIG_SMC91X=m -CONFIG_DM9000=m -CONFIG_DM9000_DEBUGLEVEL=4 -# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set -# CONFIG_ENC28J60 is not set -CONFIG_ETHOC=m -CONFIG_SMC911X=m -CONFIG_SMSC911X=m -# CONFIG_SMSC911X_ARCH_HOOKS is not set -CONFIG_DNET=m -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_B44=m -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -CONFIG_KS8851_MLL=m -# CONFIG_FTMAC100 is not set -CONFIG_NETDEV_1000=y -CONFIG_STMMAC_ETH=m -# CONFIG_STMMAC_DA is not set -# CONFIG_STMMAC_DUAL_MAC is not set -# CONFIG_FTGMAC100 is not set -CONFIG_NETDEV_10000=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m CONFIG_WLAN=y CONFIG_LIBERTAS_THINFIRM=m # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set @@ -1320,6 +1414,9 @@ CONFIG_ATH9K_HTC=m CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y CONFIG_CARL9170_WPC=y +CONFIG_CARL9170_HWRNG=y +CONFIG_ATH6KL=m +# CONFIG_ATH6KL_DEBUG is not set CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y @@ -1328,6 +1425,7 @@ CONFIG_B43_BCMA_PIO=y CONFIG_B43_PIO=y CONFIG_B43_PHY_N=y CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y # CONFIG_B43_DEBUG is not set @@ -1340,6 +1438,9 @@ CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMFMAC=m +# CONFIG_BRCMDBG is not set CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set @@ -1369,8 +1470,6 @@ CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m CONFIG_RTL8192C_COMMON=m @@ -1379,7 +1478,6 @@ CONFIG_WL1251=m CONFIG_WL1251_SDIO=m CONFIG_WL12XX_MENU=m CONFIG_WL12XX=m -# CONFIG_WL12XX_HT is not set # CONFIG_WL12XX_SPI is not set CONFIG_WL12XX_SDIO=m CONFIG_WL12XX_SDIO_TEST=m @@ -1392,42 +1490,6 @@ CONFIG_MWIFIEX_SDIO=m # # Enable WiMAX (Networking options) to see the WiMAX drivers # - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m CONFIG_WAN=y CONFIG_HDLC=m CONFIG_HDLC_RAW=m @@ -1441,37 +1503,6 @@ CONFIG_HDLC_PPP=m # CONFIG_DLCI=m CONFIG_DLCI_MAX=8 -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -CONFIG_ATM_TCP=m -# CONFIG_IEEE802154_DRIVERS is not set - -# -# CAIF transport drivers -# -# CONFIG_CAIF_TTY is not set -# CONFIG_CAIF_SPI_SLAVE is not set -# CONFIG_CAIF_HSI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOATM=m -CONFIG_PPPOL2TP=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLHC=m -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set CONFIG_ISDN=y # CONFIG_ISDN_I4L is not set # CONFIG_ISDN_CAPI is not set @@ -1519,12 +1550,10 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_MPU3050 is not set -CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m # CONFIG_INPUT_KXTJ9 is not set @@ -1533,12 +1562,9 @@ CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_CMA3000=m -# CONFIG_INPUT_CMA3000_I2C is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_CMA3000 is not set
# # Hardware I/O ports @@ -1560,6 +1586,7 @@ CONFIG_GAMEPORT_L4=m CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y @@ -1624,7 +1651,8 @@ CONFIG_I2C_ALGOPCA=m # # I2C system bus drivers (mostly embedded / system-on-chip) # -CONFIG_I2C_DESIGNWARE=m +CONFIG_I2C_BCM2708=m +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set CONFIG_I2C_GPIO=m CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m @@ -1654,21 +1682,21 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # -CONFIG_SPI_ALTERA=m +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BCM2708=m CONFIG_SPI_BITBANG=m CONFIG_SPI_GPIO=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PL022=m +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PL022 is not set # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_XILINX is not set -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_MMIO=m +# CONFIG_SPI_DESIGNWARE is not set
# # SPI Protocol Masters # CONFIG_SPI_SPIDEV=m -CONFIG_SPI_TLE62X0=m +# CONFIG_SPI_TLE62X0 is not set
# # PPS support @@ -1733,7 +1761,7 @@ CONFIG_W1_CON=y # CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m +# CONFIG_W1_MASTER_DS1WM is not set CONFIG_W1_MASTER_GPIO=m
# @@ -1757,6 +1785,7 @@ CONFIG_HWMON_VID=m # # Native drivers # +CONFIG_SENSORS_AD7314=m CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADCXX=m @@ -1818,11 +1847,13 @@ CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m CONFIG_SENSORS_MAX16064=m CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m CONFIG_SENSORS_SMM665=m @@ -1864,7 +1895,7 @@ CONFIG_WATCHDOG=y # # Watchdog Device Drivers # -# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SOFT_WATCHDOG=m # CONFIG_ARM_SP805_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set @@ -1873,7 +1904,7 @@ CONFIG_BCM2708_WDT=m # # USB-based Watchdog Cards # -# CONFIG_USBPCWATCHDOG is not set +CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y
# @@ -1893,13 +1924,15 @@ CONFIG_BCMA_POSSIBLE=y CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y # CONFIG_BCMA_DEBUG is not set -CONFIG_MFD_SUPPORT=y + +# +# Multifunction device drivers +# # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set -# CONFIG_UCB1400_CORE is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set @@ -1942,6 +1975,7 @@ CONFIG_IR_SONY_DECODER=m CONFIG_IR_RC5_SZ_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_LIRC_CODEC=m +CONFIG_RC_ATI_REMOTE=m CONFIG_IR_IMON=m CONFIG_IR_MCEUSB=m CONFIG_IR_REDRAT3=m @@ -1973,6 +2007,7 @@ CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DMA_CONTIG=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m @@ -2014,7 +2049,7 @@ CONFIG_VIDEO_WM8775=m # # Video decoders # -# CONFIG_VIDEO_ADV7180 is not set +CONFIG_VIDEO_ADV7180=m # CONFIG_VIDEO_BT819 is not set # CONFIG_VIDEO_BT856 is not set # CONFIG_VIDEO_BT866 is not set @@ -2054,6 +2089,7 @@ CONFIG_VIDEO_CX2341X=m # CONFIG_VIDEO_OV7670 is not set # CONFIG_VIDEO_MT9V011 is not set # CONFIG_VIDEO_TCM825X is not set +CONFIG_VIDEO_SR030PC30=m
# # Flash devices @@ -2072,10 +2108,8 @@ CONFIG_VIDEO_CX2341X=m # CONFIG_VIDEO_M52790 is not set # CONFIG_VIDEO_VIVI is not set CONFIG_VIDEO_CPIA2=m -# CONFIG_VIDEO_TIMBERDALE is not set +CONFIG_VIDEO_TIMBERDALE=m CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_SR030PC30=m -CONFIG_VIDEO_NOON010PC30=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_IMX074=m CONFIG_SOC_CAMERA_MT9M001=m @@ -2098,50 +2132,51 @@ CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set -# CONFIG_USB_GL860 is not set -# CONFIG_USB_GSPCA_BENQ is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_CPIA1 is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set -# CONFIG_USB_GSPCA_JEILINJ is not set -# CONFIG_USB_GSPCA_KINECT is not set -# CONFIG_USB_GSPCA_KONICA is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_NW80X is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_OV534_9 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7302 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SE401 is not set -# CONFIG_USB_GSPCA_SN9C2028 is not set -# CONFIG_USB_GSPCA_SN9C20X is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SPCA1528 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_SQ930X is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_STV0680 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_VICAM is not set -# CONFIG_USB_GSPCA_XIRLINK_CIT is not set -# CONFIG_USB_GSPCA_ZC3XX is not set +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y @@ -2156,6 +2191,9 @@ CONFIG_VIDEO_CX231XX=m CONFIG_VIDEO_CX231XX_RC=y CONFIG_VIDEO_CX231XX_ALSA=m CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m CONFIG_VIDEO_USBVISION=m CONFIG_USB_ET61X251=m CONFIG_USB_SN9C102=m @@ -2170,7 +2208,7 @@ CONFIG_USB_S2255=m CONFIG_DVB_MAX_ADAPTERS=8 # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set +CONFIG_TTPCI_EEPROM=m
# # Supported USB Adapters @@ -2197,6 +2235,7 @@ CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_ANYSEE=m @@ -2208,6 +2247,8 @@ CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_IT913X=m +CONFIG_DVB_USB_MXL111SF=m CONFIG_SMS_SIANO_MDTV=m
# @@ -2261,6 +2302,7 @@ CONFIG_DVB_TDA826X=m CONFIG_DVB_CX24116=m CONFIG_DVB_SI21XX=m CONFIG_DVB_DS3000=m +CONFIG_DVB_TDA10071=m
# # DVB-T (terrestrial) frontends @@ -2315,11 +2357,14 @@ CONFIG_DVB_TUNER_DIB0090=m # SEC control devices for DVB-S # CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6421=m CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m CONFIG_DVB_LGS8GXX=m CONFIG_DVB_ATBM8830=m CONFIG_DVB_IX2505V=m +CONFIG_DVB_IT913X_FE=m
# # Tools to develop new frontends @@ -2359,6 +2404,7 @@ CONFIG_FB_BCM2708=y # CONFIG_FB_ARMCLCD is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set @@ -2420,14 +2466,12 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m -CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m @@ -2435,9 +2479,8 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m -# CONFIG_SND_AC97_POWER_SAVE is not set CONFIG_SND_ARM=y -CONFIG_SND_ARMAACI=m +# CONFIG_SND_ARMAACI is not set CONFIG_SND_BCM2835=m CONFIG_SND_SPI=y CONFIG_SND_USB=y @@ -2448,7 +2491,6 @@ CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_6FIRE=m # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set @@ -2487,10 +2529,11 @@ CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set -# CONFIG_LOGIWII_FF is not set +# CONFIG_LOGIWHEELS_FF is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m @@ -2504,6 +2547,7 @@ CONFIG_HID_PICOLCD=m # CONFIG_HID_PICOLCD_BACKLIGHT is not set # CONFIG_HID_PICOLCD_LCD is not set # CONFIG_HID_PICOLCD_LEDS is not set +CONFIG_HID_PRIMAX=m CONFIG_HID_QUANTA=m CONFIG_HID_ROCCAT=m CONFIG_HID_ROCCAT_COMMON=m @@ -2527,9 +2571,11 @@ CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_HID_ZYDACRON=m CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_ARCH_HAS_XHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -2544,6 +2590,7 @@ CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_DWC3 is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -2566,7 +2613,7 @@ CONFIG_USB_DWCOTG=y # USB Device Class drivers # CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set
@@ -2687,6 +2734,28 @@ CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_GADGET is not set +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set
# # OTG and related infrastructure @@ -2741,6 +2810,7 @@ CONFIG_LEDS_GPIO=y # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_RENESAS_TPU is not set CONFIG_LEDS_TRIGGERS=y
# @@ -2758,8 +2828,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set
# @@ -2786,7 +2855,7 @@ CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m -# CONFIG_RTC_DRV_M41T80_WDT is not set +CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m @@ -2839,6 +2908,7 @@ CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y CONFIG_DW_DMAC=m CONFIG_TIMB_DMA=m +CONFIG_PL330_DMA=m CONFIG_DMA_ENGINE=y
# @@ -2856,10 +2926,16 @@ CONFIG_UIO_PDRV_GENIRQ=m # Virtio drivers # # CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set # CONFIG_STAGING is not set CONFIG_CLKDEV_LOOKUP=y + +# +# Hardware Spinlock drivers +# # CONFIG_IOMMU_SUPPORT is not set # CONFIG_VIRT_DRIVERS is not set +# CONFIG_PM_DEVFREQ is not set
# # File systems @@ -3188,6 +3264,7 @@ CONFIG_HAVE_ARCH_KGDB=y # Security options # CONFIG_KEYS=y +# CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set @@ -3219,6 +3296,7 @@ CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set @@ -3277,6 +3355,7 @@ CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m diff --git a/config/rootfiles/common/armv5tel/linux-omap b/config/rootfiles/common/armv5tel/linux-omap index d5e7cf0..43f7aa0 100644 --- a/config/rootfiles/common/armv5tel/linux-omap +++ b/config/rootfiles/common/armv5tel/linux-omap @@ -1,5 +1,5 @@ boot/uInit-ipfire-omap boot/uImage-ipfire-omap -boot/System.map-2.6.40.32-ipfire-omap -boot/config-2.6.40.32-ipfire-omap -lib/modules/2.6.40.32-ipfire-omap +boot/System.map-2.6.42.19-ipfire-omap +boot/config-2.6.42.19-ipfire-omap +lib/modules/2.6.42.19-ipfire-omap diff --git a/config/rootfiles/common/armv5tel/linux-rpi b/config/rootfiles/common/armv5tel/linux-rpi index 5a14b2f..7c18d4b 100644 --- a/config/rootfiles/common/armv5tel/linux-rpi +++ b/config/rootfiles/common/armv5tel/linux-rpi @@ -1,4 +1,4 @@ boot/kernel.img -boot/System.map-2.6.41.10-ipfire-rpi -boot/config-2.6.41.10-ipfire-rpi -lib/modules/2.6.41.10-ipfire-rpi +boot/System.map-2.6.42.19-ipfire-rpi +boot/config-2.6.42.19-ipfire-rpi +lib/modules/2.6.42.19-ipfire-rpi diff --git a/config/rootfiles/core/59/update.sh b/config/rootfiles/core/59/update.sh index 5a3cc2a..2f1d865 100644 --- a/config/rootfiles/core/59/update.sh +++ b/config/rootfiles/core/59/update.sh @@ -34,12 +34,16 @@ done
# #Stop services +/etc/init.d/ipsec stop +/etc/init.d/sshd stop
# #Extract files +extract_files
# #Start services +/etc/init.d/sshd start if [ `grep "ENABLED=on" /var/ipfire/vpn/settings` ]; then /etc/init.d/ipsec start fi diff --git a/config/rootfiles/core/60/exclude b/config/rootfiles/core/60/exclude new file mode 100644 index 0000000..7360266 --- /dev/null +++ b/config/rootfiles/core/60/exclude @@ -0,0 +1,12 @@ +srv/web/ipfire/html/proxy.pac +etc/udev/rules.d/30-persistent-network.rules +etc/ipsec.conf +etc/ipsec.secrets +etc/ipsec.user.conf +etc/ipsec.user.secrets +var/updatecache +etc/localtime +var/ipfire/ovpn +etc/ssh/ssh_config +etc/ssh/sshd_config +etc/ssl/openssl.cnf diff --git a/config/rootfiles/core/60/filelists/files b/config/rootfiles/core/60/filelists/files new file mode 100644 index 0000000..409e5fe --- /dev/null +++ b/config/rootfiles/core/60/filelists/files @@ -0,0 +1,2 @@ +etc/system-release +etc/issue diff --git a/config/rootfiles/core/60/filelists/strongswan b/config/rootfiles/core/60/filelists/strongswan new file mode 120000 index 0000000..90c727e --- /dev/null +++ b/config/rootfiles/core/60/filelists/strongswan @@ -0,0 +1 @@ +../../../common/strongswan \ No newline at end of file diff --git a/config/rootfiles/core/60/meta b/config/rootfiles/core/60/meta new file mode 100644 index 0000000..d547fa8 --- /dev/null +++ b/config/rootfiles/core/60/meta @@ -0,0 +1 @@ +DEPS="" diff --git a/config/rootfiles/core/60/update.sh b/config/rootfiles/core/60/update.sh new file mode 100644 index 0000000..5aaa23e --- /dev/null +++ b/config/rootfiles/core/60/update.sh @@ -0,0 +1,83 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 3 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2012 IPFire-Team info@ipfire.org. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +/usr/local/bin/backupctrl exclude >/dev/null 2>&1 + +# +# Remove old core updates from pakfire cache to save space... +core=60 +for (( i=1; i<=$core; i++ )) +do + rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire +done + +# +#Stop services +/etc/init.d/ipsec stop + +# +#Extract files +extract_files +# +#Start services +if [ `grep "ENABLED=on" /var/ipfire/vpn/settings` ]; then + /etc/init.d/ipsec start +fi + +# +#Update Language cache +#perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang" + +#Rebuild module dep's +#arch=`uname -m` +#if [ ${arch::3} == "arm" ]; then +# depmod -a 2.6.32.45-ipfire-versatile >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-kirkwood >/dev/null 2>&1 +#else +# depmod -a 2.6.32.45-ipfire >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-pae >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-xen >/dev/null 2>&1 +#fi + + +#Rebuild initrd's because some compat-wireless modules are inside +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45.img 2.6.32.45-ipfire +#if [ -e /boot/ipfirerd-2.6.32.45-pae.img ]; then +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45-pae.img 2.6.32.45-ipfire-pae +#fi +#if [ -e /boot/ipfirerd-2.6.32.45-xen.img ]; then +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45-xen.img 2.6.32.45-ipfire-xen +#fi + +sync + +# This update need a reboot... +#touch /var/run/need_reboot + +# +#Finish +/etc/init.d/fireinfo start +sendprofile +#Don't report the exitcode last command +exit 0 diff --git a/config/rootfiles/core/61/exclude b/config/rootfiles/core/61/exclude new file mode 100644 index 0000000..7360266 --- /dev/null +++ b/config/rootfiles/core/61/exclude @@ -0,0 +1,12 @@ +srv/web/ipfire/html/proxy.pac +etc/udev/rules.d/30-persistent-network.rules +etc/ipsec.conf +etc/ipsec.secrets +etc/ipsec.user.conf +etc/ipsec.user.secrets +var/updatecache +etc/localtime +var/ipfire/ovpn +etc/ssh/ssh_config +etc/ssh/sshd_config +etc/ssl/openssl.cnf diff --git a/config/rootfiles/core/61/filelists/GeoIP b/config/rootfiles/core/61/filelists/GeoIP new file mode 100644 index 0000000..0258236 --- /dev/null +++ b/config/rootfiles/core/61/filelists/GeoIP @@ -0,0 +1 @@ +usr/local/share/GeoIP/GeoIP.dat diff --git a/config/rootfiles/core/61/filelists/Net-Telnet b/config/rootfiles/core/61/filelists/Net-Telnet new file mode 120000 index 0000000..66ca926 --- /dev/null +++ b/config/rootfiles/core/61/filelists/Net-Telnet @@ -0,0 +1 @@ +../../../common/Net-Telnet \ No newline at end of file diff --git a/config/rootfiles/core/61/filelists/files b/config/rootfiles/core/61/filelists/files new file mode 100644 index 0000000..78765a6 --- /dev/null +++ b/config/rootfiles/core/61/filelists/files @@ -0,0 +1,7 @@ +etc/system-release +etc/issue +etc/rc.d/init.d/collectd +srv/web/ipfire/cgi-bin/index.cgi +srv/web/ipfire/cgi-bin/ovpnmain.cgi +var/ipfire/general-functions.pl +var/ipfire/langs diff --git a/config/rootfiles/core/61/meta b/config/rootfiles/core/61/meta new file mode 100644 index 0000000..d547fa8 --- /dev/null +++ b/config/rootfiles/core/61/meta @@ -0,0 +1 @@ +DEPS="" diff --git a/config/rootfiles/core/61/update.sh b/config/rootfiles/core/61/update.sh new file mode 100644 index 0000000..c6a8580 --- /dev/null +++ b/config/rootfiles/core/61/update.sh @@ -0,0 +1,80 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 3 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2012 IPFire-Team info@ipfire.org. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +/usr/local/bin/backupctrl exclude >/dev/null 2>&1 + +# +# Remove old core updates from pakfire cache to save space... +core=61 +for (( i=1; i<=$core; i++ )) +do + rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire +done + +# +#Stop services + +# +#Extract files +extract_files + +# +#Start services + +# +#Update Language cache +perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang" + +#Rebuild module dep's +#arch=`uname -m` +#if [ ${arch::3} == "arm" ]; then +# depmod -a 2.6.32.45-ipfire-versatile >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-kirkwood >/dev/null 2>&1 +#else +# depmod -a 2.6.32.45-ipfire >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-pae >/dev/null 2>&1 +# depmod -a 2.6.32.45-ipfire-xen >/dev/null 2>&1 +#fi + + +#Rebuild initrd's because some compat-wireless modules are inside +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45.img 2.6.32.45-ipfire +#if [ -e /boot/ipfirerd-2.6.32.45-pae.img ]; then +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45-pae.img 2.6.32.45-ipfire-pae +#fi +#if [ -e /boot/ipfirerd-2.6.32.45-xen.img ]; then +#/sbin/dracut --force --verbose /boot/ipfirerd-2.6.32.45-xen.img 2.6.32.45-ipfire-xen +#fi + +sync + +# This update need a reboot... +#touch /var/run/need_reboot + +# +#Finish +/etc/init.d/fireinfo start +sendprofile +#Don't report the exitcode last command +exit 0 diff --git a/config/rootfiles/packages/mtr b/config/rootfiles/packages/mtr new file mode 100644 index 0000000..25356a7 --- /dev/null +++ b/config/rootfiles/packages/mtr @@ -0,0 +1,2 @@ +usr/sbin/mtr +#usr/share/man/man8/mtr.8 diff --git a/config/rootfiles/packages/tcpick b/config/rootfiles/packages/tcpick new file mode 100644 index 0000000..f447d21 --- /dev/null +++ b/config/rootfiles/packages/tcpick @@ -0,0 +1,3 @@ +usr/bin/tcpick +#usr/man/man8/tcpick.8 +#usr/man/man8/tcpick_italian.8 diff --git a/config/u-boot/boot.scr b/config/u-boot/boot.scr index bdc4267..7174fae 100755 Binary files a/config/u-boot/boot.scr and b/config/u-boot/boot.scr differ diff --git a/config/u-boot/boot.script b/config/u-boot/boot.script index e30615f..6fccbf1 100755 --- a/config/u-boot/boot.script +++ b/config/u-boot/boot.script @@ -1,4 +1,4 @@ fatload mmc 0:1 0x80000000 uImage-ipfire-omap fatload mmc 0:1 0x81600000 uInit-ipfire-omap -setenv bootargs vram=32M console=ttyO2,115200n8 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 rw +setenv bootargs vram=32M console=tty1 omapfb.mode=dvi:800x600MR-16@60 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 rw bootm 0x80000000 0x81600000 diff --git a/html/cgi-bin/index.cgi b/html/cgi-bin/index.cgi index 0023523..07dc9e7 100644 --- a/html/cgi-bin/index.cgi +++ b/html/cgi-bin/index.cgi @@ -421,7 +421,7 @@ if ($confighash{$dkey}[3] eq 'net') { $display = "<font color=$Header::colourred>$tustate[1]</font>"; }
print <<END; - <tr><td align='center' bgcolor='$Header::colourvpn' width='25%'><a href="/cgi-bin/ovpnmain.cgi"><font size='2' color='white'><b>OpenVPN n2n</b></font></a><br> + <tr><td align='center' bgcolor='$Header::colourovpn' width='25%'><a href="/cgi-bin/ovpnmain.cgi"><font size='2' color='white'><b>OpenVPN n2n</b></font></a><br> <td width='30%' align='center'> $confighash{$dkey}[10]<td width='45%' align='center'> $display
END diff --git a/html/cgi-bin/ovpnmain.cgi b/html/cgi-bin/ovpnmain.cgi index 4bfb6aa..0c4502d 100644 --- a/html/cgi-bin/ovpnmain.cgi +++ b/html/cgi-bin/ovpnmain.cgi @@ -573,6 +573,10 @@ if ($cgiparams{'ACTION'} eq $Lang::tr{'save-adv-options'}) { &write_routepushfile; undef $vpnsettings{'ROUTES_PUSH'}; } + else { + undef $vpnsettings{'ROUTES_PUSH'}; + &write_routepushfile; + } if ((length($cgiparams{'MAX_CLIENTS'}) == 0) || (($cgiparams{'MAX_CLIENTS'}) < 1 ) || (($cgiparams{'MAX_CLIENTS'}) > 255 )) { $errormessage = $Lang::tr{'invalid input for max clients'}; goto ADV_ERROR; diff --git a/langs/de/cgi-bin/de.pl b/langs/de/cgi-bin/de.pl index a47c9f7..b576d3e 100644 --- a/langs/de/cgi-bin/de.pl +++ b/langs/de/cgi-bin/de.pl @@ -1368,7 +1368,7 @@ 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', 'ovpn routes push options' => 'Route push Optionen', -'ovpn routes push' => 'Routen', +'ovpn routes push' => 'Routen (eine pro Zeile)', 'ovpn errmsg invalid ip or mask' => 'Ungültige Netzwerk-Adresse oder Subnetzmaske', 'ovpn errmsg green already pushed' => 'Route für grünes Netzwerk wird immer gesetzt', 'package failed to install' => 'Programmpaket konnte nicht installiert werden.', diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl index 16df2b9..d1c3b6b 100644 --- a/langs/en/cgi-bin/en.pl +++ b/langs/en/cgi-bin/en.pl @@ -1395,6 +1395,10 @@ 'ovpn_processprioVH' => 'Very high', 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', +'ovpn routes push options' => 'Route push options', +'ovpn routes push' => 'Routes (one per line):', +'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask', +'ovpn errmsg green already pushed' => 'Route for green network is always set', 'package failed to install' => 'Package failed to install.', 'pagerefresh' => 'Page is beeing refreshed, please wait.', 'pakfire accept all' => 'Do you want to install all packages?', diff --git a/langs/es/cgi-bin/es.pl b/langs/es/cgi-bin/es.pl index 365630a..387ab4a 100644 --- a/langs/es/cgi-bin/es.pl +++ b/langs/es/cgi-bin/es.pl @@ -1352,6 +1352,10 @@ 'ovpn_processprioVH' => 'Muy alto', 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', +'ovpn routes push options' => 'Route push options', +'ovpn routes push' => 'Routes (one per line):', +'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask', +'ovpn errmsg green already pushed' => 'Route for green network is always set', 'package failed to install' => 'Falló la instalación del paquete', 'pagerefresh' => 'La página se está actualiszando, por favor espere.', 'pakfire accept all' => '¿Desea instalar todos los paquetes?', diff --git a/langs/fr/cgi-bin/fr.pl b/langs/fr/cgi-bin/fr.pl index e7e5aed..a537459 100644 --- a/langs/fr/cgi-bin/fr.pl +++ b/langs/fr/cgi-bin/fr.pl @@ -1364,6 +1364,10 @@ 'ovpn_processprioVH' => 'Très haute', 'ovpnstatus log' => 'Journal statut OVPN', 'ovpnsys log' => 'Journal système OVPN', +'ovpn routes push options' => 'Options de Route push', +'ovpn routes push' => 'Routes (une par ligne):', +'ovpn errmsg invalid ip or mask' => 'Adresse ou masque de sous-r?seau invalide', +'ovpn errmsg green already pushed' => 'La route pour le r?seau green est toujours activ?e', 'package failed to install' => 'L'installation du paquet a échoué.', 'pagerefresh' => 'La page est entrain d'être rafraichie, veuillez attendre.', 'pakfire accept all' => 'Voulez-vous installer tout les paquets?', diff --git a/langs/pl/cgi-bin/pl.pl b/langs/pl/cgi-bin/pl.pl index 12439e4..d8f1890 100644 --- a/langs/pl/cgi-bin/pl.pl +++ b/langs/pl/cgi-bin/pl.pl @@ -1375,6 +1375,10 @@ 'ovpn_processprioVH' => 'Bardzo wysoki', 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', +'ovpn routes push options' => 'Route push options', +'ovpn routes push' => 'Routes (one per line):', +'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask', +'ovpn errmsg green already pushed' => 'Route for green network is always set', 'package failed to install' => 'Błąd instalacji pakietu.', 'pagerefresh' => 'Strona jest odświeżana, proszę czekać.', 'pakfire accept all' => 'Czy chcesz zainstalować wszystkie pakiety?', diff --git a/langs/ru/cgi-bin/ru.pl b/langs/ru/cgi-bin/ru.pl index 18c1349..c1afd01 100644 --- a/langs/ru/cgi-bin/ru.pl +++ b/langs/ru/cgi-bin/ru.pl @@ -1366,6 +1366,10 @@ 'ovpn_processprioVH' => 'Very high', 'ovpnstatus log' => 'OVPN-Status-Log', 'ovpnsys log' => 'OVPN-System-Log', +'ovpn routes push options' => 'Настройки маршрутизации', +'ovpn routes push' => 'Маршрутизаторы (по одному на строчку)', +'ovpn errmsg invalid ip or mask' => 'Неправильный адрес или маска подсти', +'ovpn errmsg green already pushed' => 'Маршрут для зелёной сети всегда включён', 'package failed to install' => 'Package failed to install.', 'pagerefresh' => 'Page is beeing refreshed, please wait.', 'pakfire accept all' => 'Do you want to install all packages?', diff --git a/lfs/flash-images b/lfs/flash-images index 4091322..075808b 100644 --- a/lfs/flash-images +++ b/lfs/flash-images @@ -44,20 +44,18 @@ md5 : ############################################################################### # Installation Details ############################################################################### -IMGinst := /install/images/$(SNAME)-$(VERSION).2gb-ext2.$(MACHINE)-full-core$(CORE).img -IMGinsts := /install/images/$(SNAME)-$(VERSION).2gb-ext2-scon.$(MACHINE)-full-core$(CORE).img +IMGinst := /install/images/$(SNAME)-$(VERSION).1gb-ext4.$(MACHINE)-full-core$(CORE).img +IMGinsts := /install/images/$(SNAME)-$(VERSION).1gb-ext4-scon.$(MACHINE)-full-core$(CORE).img MNThdd := /install/harddisk IMGpart := /install/images/part_area IMGboot := /install/images/bootfs # don't change SIZEboot this without checking Image size SIZEboot := 50 IMGroot := /install/images/rootfs -SIZEroot := 1400 -IMGvar := /install/images/varfs -SIZEvar := 400 +SIZEroot := 600
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) && mkdir -p $(MNThdd) + rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) && mkdir -p $(MNThdd)
# Create first 32 sectors of image dd bs=1k if=/dev/zero of=$(IMGpart) count=16 @@ -65,7 +63,6 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) # Create images for filesystems dd bs=1K if=/dev/zero of=$(IMGboot) count=51184 # 50MB-16K dd bs=1M if=/dev/zero of=$(IMGroot) count=$(SIZEroot) - dd bs=1M if=/dev/zero of=$(IMGvar) count=$(SIZEvar)
# Format them ifeq "$(MACHINE_TYPE)" "arm" @@ -73,8 +70,7 @@ ifeq "$(MACHINE_TYPE)" "arm" else mkfs.ext2 -F $(IMGboot) endif - mkfs.ext2 -F $(IMGroot) - mkfs.ext2 -F $(IMGvar) + mkfs.ext4 -O ^has_journal,extent -F $(IMGroot)
# Mount Images mount -o loop $(IMGroot) $(MNThdd) @@ -82,7 +78,6 @@ endif mkdir $(MNThdd)/var mkdir $(MNThdd)/var/log mount -o loop $(IMGboot) $(MNThdd)/boot - mount -o loop $(IMGvar) $(MNThdd)/var
# Install MLO and uboot first ifeq "$(MACHINE_TYPE)" "arm" @@ -111,8 +106,8 @@ ifeq "$(MACHINE_TYPE)" "arm" endif sed -i -e "s|DEVICE2|#DEVICE2|g" $(MNThdd)/etc/fstab sed -i -e "s|DEVICE3|UUID=$$(blkid -sUUID $(IMGroot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab - sed -i -e "s|DEVICE4|UUID=$$(blkid -sUUID $(IMGvar) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab - sed -i -e "s|FSTYPE|ext2|g" $(MNThdd)/etc/fstab + sed -i -e "s|DEVICE4|#DEVICE4|g" $(MNThdd)/etc/fstab + sed -i -e "s|FSTYPE|ext4|g" $(MNThdd)/etc/fstab
ifneq "$(MACHINE_TYPE)" "arm" sed -i -e "s|MOUNT|ro|g" $(MNThdd)/boot/grub/grub.conf @@ -127,14 +122,13 @@ endif # Setup symlink for partresize at first boot... ln -sf ../init.d/partresize $(MNThdd)/etc/rc.d/rcsysinit.d/S25partresize # Setup symlink for fsresize at second boot... - ln -sf ../init.d/fsresize $(MNThdd)/etc/rc.d/rcsysinit.d/S26fsresize + ln -sf ../init.d/fsresize $(MNThdd)/etc/rc.d/rcsysinit.d/S42fsresize
# Unmount umount $(MNThdd)/proc umount $(MNThdd)/dev umount $(MNThdd)/sys umount $(MNThdd)/boot - umount $(MNThdd)/var umount $(MNThdd)
# zerofree the ext2 images to get better compression @@ -144,21 +138,18 @@ ifneq "$(MACHINE_TYPE)" "arm" fsck.ext2 -f -y $(IMGboot) endif zerofree $(IMGroot) - -fsck.ext2 -f -y $(IMGroot) - fsck.ext2 -f -y $(IMGroot) - zerofree $(IMGvar) - -fsck.ext2 -f -y $(IMGvar) - fsck.ext2 -f -y $(IMGvar) + -fsck.ext4 -f -y $(IMGroot) + fsck.ext4 -f -y $(IMGroot)
# Cat to an image - cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinst) + cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinst)
# Write Partition table ifneq "$(MACHINE_TYPE)" "arm" - echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \ + echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \ | sfdisk -D -uM -H 64 -S 32 $(IMGinst) else - echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \ + echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \ | sfdisk -D -uM -H 64 -S 32 $(IMGinst) endif
@@ -187,6 +178,8 @@ ifneq "$(MACHINE_TYPE)" "arm" sed -i -e "s| panic=10 | console=ttyS0,115200n8 panic=10 |g" $(MNThdd)/boot/grub/grub.conf else sed -i -e "s| console=tty1 | console=ttyAMA0,115200n8 |g" $(MNThdd)/boot/cmdline.txt + sed -i -e "s| console=tty1 omapfb.mode=dvi:800x600MR-16@60 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/boot.script + cd $(MNThdd)/boot && ./convert_bootscript endif
sed -i -e "s|1:2345:respawn:|#1:2345:respawn:|g" $(MNThdd)/etc/inittab @@ -207,22 +200,19 @@ ifneq "$(MACHINE_TYPE)" "arm" fsck.ext2 -f -y $(IMGboot) endif zerofree $(IMGroot) - -fsck.ext2 -f -y $(IMGroot) - fsck.ext2 -f -y $(IMGroot) - zerofree $(IMGvar) - -fsck.ext2 -f -y $(IMGvar) - fsck.ext2 -f -y $(IMGvar) + -fsck.ext4 -f -y $(IMGroot) + fsck.ext4 -f -y $(IMGroot)
# Cat to an image - cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinsts) - rm -vf $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) + cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinsts) + rm -vf $(IMGpart) $(IMGboot) $(IMGroot)
# Write Partition table ifneq "$(MACHINE_TYPE)" "arm" - echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \ + echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \ | sfdisk -D -uM -H 64 -S 32 $(IMGinsts) else - echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \ + echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \ | sfdisk -D -uM -H 64 -S 32 $(IMGinsts) endif
@@ -239,4 +229,4 @@ endif # Compress Image gzip -f9 $(IMGinsts)
- rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) + rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot) diff --git a/lfs/linux-rpi b/lfs/linux-rpi deleted file mode 100644 index c8f5fc8..0000000 --- a/lfs/linux-rpi +++ /dev/null @@ -1,264 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2011 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -PATCHLEVEL = .10 -VER = 2.6.41.10 - -XVERS = 3.1.10 -XVERSION = 2 -XPATCHLEVEL = 6 -XSUBLEVEL = 41 -XEXTRAVERSION = .10 - -THISAPP = linux-$(VER) -DL_FILE = linux-$(XVERS).tar.bz2 -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -CFLAGS = -CXXFLAGS = - -PAK_VER = 20 -DEPS = "" - -VERSUFIX=ipfire$(KCFG) - -ifeq "$(HEADERS)" "1" -ifeq "$(TOOLS)" "1" - TARGET = $(DIR_INFO)/linux-libc-headers-$(VER)-$(VERSUFIX)-tools - HEADERS_PREFIX = /tools -else - TARGET = $(DIR_INFO)/linux-libc-headers-$(VER)-$(VERSUFIX) - HEADERS_PREFIX = /usr -endif -else - TARGET = $(DIR_INFO)/linux-$(VER)-$(VERSUFIX) -endif - -ifeq "$(MACHINE_TYPE)" "arm" - HEADERS_ARCH=arm -else - HEADERS_ARCH=x86 -endif - -ifeq "$(KCFG)" "" -LASTKERNEL=1 -endif -ifeq "$(KCFG)" "-kirkwood" -LASTKERNEL=1 -endif - -############################################################################### -# Top-level Rules -############################################################################### -objects =$(DL_FILE) \ - patch-2.6.16-nath323-1.3.bz2 \ - rpi-patches-9efb470.patch.xz - - -$(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE) -patch-2.6.16-nath323-1.3.bz2 = $(URL_IPFIRE)/patch-2.6.16-nath323-1.3.bz2 -rpi-patches-9efb470.patch.xz = $(URL_IPFIRE)/rpi-patches-9efb470.patch.xz - -$(DL_FILE)_MD5 = 3649bdaa50ffd9114cc16486ec54d83a -patch-2.6.16-nath323-1.3.bz2_MD5 = f926409ff703a307baf54b57ab75d138 -rpi-patches-9efb470.patch.xz_MD5 = 833274ba420078d22f7f7b7f56debe1d - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -dist: - @$(PAK) -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) $(DIR_SRC)/linux && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) - - # Change version from 3.x to 2.6.4x - cd $(DIR_SRC)/linux-$(XVERS) && sed -i -e "s/^VERSION =.*$$/VERSION = $(XVERSION)/g" Makefile - cd $(DIR_SRC)/linux-$(XVERS) && sed -i -e "s/^PATCHLEVEL =.*$$/PATCHLEVEL = $(XPATCHLEVEL)/g" Makefile - cd $(DIR_SRC)/linux-$(XVERS) && sed -i -e "s/^SUBLEVEL =.*$$/SUBLEVEL = $(XSUBLEVEL)/g" Makefile - cd $(DIR_SRC)/linux-$(XVERS) && sed -i -e "s/^EXTRAVERSION =.*$$/EXTRAVERSION = $(XEXTRAVERSION)/g" Makefile - mv $(DIR_SRC)/linux-$(XVERS) $(DIR_SRC)/linux-$(VER) - - ln -svf linux-$(VER) $(DIR_SRC)/linux - - # Linux Intermediate Queueing Device - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.1-imq.patch - - # Not report deprecated syscall 1.23 (for kudzu) -# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.25.18-not_report_sysctl_1.23.patch - - - # ipp2p 0.8.2-ipfire - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.0-ipp2p-0.8.2-ipfire.patch - - # Layer7-patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/netfilter_layer7_2.22_kernel3.0.patch - - # Add some more LED triggers -# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.11-netdev-1.patch - - # Huawei Android Phones (Vodafone V845, T-Mobile Pulse/mini ...) - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.15-option_add_huawei_android.patch - - # Fix uevent PHYSDEVDRIVER - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_ipg-fix-driver-name.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch - -ifeq "$(KCFG)" "-kirkwood" - # Add dreamplug,guruplug and icy 62x0 support on ARM-kirkwood - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.45-arm_kirkwood_setups.patch -endif - -ifeq "$(MACHINE_TYPE)" "arm" - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.45_align_ssb_modtable_32bit_boundary.patch - - # Reverse some asm optimizations that are incompatible with older gcc - cd $(DIR_APP) && patch -p1 -R < $(DIR_SRC)/src/patches/linux-2.6-arm-asm-constraint.patch -endif - -ifeq "$(KCFG)" "-omap" - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-wlan-fix.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-dvi720p.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-i2c-fix.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-reboot.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-memcpy.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch -endif - -ifeq "$(KCFG)" "-rpi" - # Apply Raspberry Pi kernel patches. (only avail for 3.1.x kernel yet) - -cd $(DIR_APP) && xzcat $(DIR_DL)/rpi-patches-9efb470.patch.xz | patch -Np1 -endif - -ifeq "$(HEADERS)" "1" - # Install the header files - cd $(DIR_APP) && make ARCH=$(HEADERS_ARCH) INSTALL_HDR_PATH=dest headers_install - -mkdir -pv $(BUILDROOT)/$(HEADERS_PREFIX)/include - cd $(DIR_APP) && find dest/include ( -name .install -o -name ..install.cmd ) -delete - cd $(DIR_APP) && cp -rv dest/include/* $(BUILDROOT)/$(HEADERS_PREFIX)/include -else - - # Install ipfire logo - cd $(DIR_APP) && cp -vf $(DIR_SRC)/config/kernel/ipfire_logo.ppm \ - drivers/video/logo/logo_linux_clut224.ppm - - # Cleanup kernel source - cp $(DIR_SRC)/config/kernel/kernel.config.$(MACHINE)-$(VERSUFIX) $(DIR_APP)/.config - cd $(DIR_APP) && make CC="$(KGCC)" oldconfig - cd $(DIR_APP) && make CC="$(KGCC)" clean - cd $(DIR_APP) && sed -i -e 's/EXTRAVERSION\ =.*/EXTRAVERSION\ =\ $(PATCHLEVEL)-$(VERSUFIX)/' Makefile - -ifeq "$(KCFG)" "-kirkwood" - cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" uImage - cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/vmlinuz-$(VER)-$(VERSUFIX) - cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/uImage-$(VERSUFIX) -else -ifeq "$(KCFG)" "-omap" - cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" uImage - cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/vmlinuz-$(VER)-$(VERSUFIX) - cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/uImage-$(VERSUFIX) -else -ifeq "$(KCFG)" "-rpi" - cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage - cd /boot && cat first32k.bin $(DIR_APP)/arch/arm/boot/Image > kernel.img - cd $(DIR_APP) && cp -v /boot/kernel.img /boot/vmlinuz-$(VER)-$(VERSUFIX) -else -ifeq "$(KCFG)" "-versatile" - cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage - cd $(DIR_APP) && cp -v arch/arm/boot/zImage /boot/vmlinuz-$(VER)-$(VERSUFIX) -else - cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" bzImage - cd $(DIR_APP) && cp -v arch/i386/boot/bzImage /boot/vmlinuz-$(VER)-$(VERSUFIX) -endif -endif -endif -endif - cd $(DIR_APP) && cp -v System.map /boot/System.map-$(VER)-$(VERSUFIX) - cd $(DIR_APP) && cp -v .config /boot/config-$(VER)-$(VERSUFIX) - ln -sf vmlinuz-$(VER)-$(VERSUFIX) /boot/vmlinuz-$(VERSUFIX) - ln -sf System.map-$(VER)-$(VERSUFIX) /boot/System.map-$(VERSUFIX) - cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) modules - cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) modules_install - cd $(DIR_APP) && make CC="$(KGCC)" $(MAKETUNING) firmware_install - -ifeq "$(LASTKERNEL)" "1" - # Only do this once - cd $(DIR_APP) && install -m 755 usr/gen_init_cpio /sbin/ - - # Blacklist matroxfb_base - echo "blacklist matroxfb_base" >> /etc/modprobe.d/framebuffer - # Blacklist old framebuffer modules - for f in $$(find /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/video -name *fb.ko); do \ - echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/framebuffer ; \ - done - # Blacklist new drm framebuffer modules - for f in $$(ls -1 /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/gpu/drm/*/*.ko); do \ - echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/framebuffer ; \ - done - sed -i -e "s|.ko||g" /etc/modprobe.d/framebuffer - - # Blacklist isdn modules - for f in $$(find /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/isdn -name *.ko); do \ - echo "blacklist $$(basename $$f)" >> /etc/modprobe.d/isdn ; \ - done - sed -i -e "s|.ko||g" /etc/modprobe.d/isdn - - # Disable ipv6 at runtime - echo "options ipv6 disable_ipv6=1" > /etc/modprobe.d/ipv6 -endif - -ifneq "$(MACHINE_TYPE)" "arm" - # Disable geode_aes modul - mv /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/crypto/geode-aes.ko \ - /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/crypto/geode-aes.ko.off -endif -endif - - @rm -rf $(DIR_SRC)/patch-o-matic* $(DIR_SRC)/iptables* $(DIR_SRC)/squashfs* $(DIR_SRC)/netfilter-layer7-* - @$(POSTBUILD) diff --git a/lfs/linux3 b/lfs/linux3 index b7d5e26..e049be0 100644 --- a/lfs/linux3 +++ b/lfs/linux3 @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2011 IPFire Team info@ipfire.org # +# Copyright (C) 2007-2012 IPFire Team info@ipfire.org # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,14 +24,17 @@
include Config
-PATCHLEVEL = .32 -VER = 2.6.40.32 +PATCHLEVEL = .19
-XVERS = 3.0.32 +VER = 2.6.42.19 + +XVERS = 3.2.19 XVERSION = 2 XPATCHLEVEL = 6 -XSUBLEVEL = 40 -XEXTRAVERSION = .32 +XSUBLEVEL = 42 +XEXTRAVERSION = .19 + +RPI_PATCHES = linux-3.2-bootc-5b84c25
THISAPP = linux-$(VER) DL_FILE = linux-$(XVERS).tar.bz2 @@ -74,13 +77,15 @@ endif # Top-level Rules ############################################################################### objects =$(DL_FILE) \ - patch-2.6.16-nath323-1.3.bz2 + rpi-patches-$(RPI_PATCHES).patch.xz +
$(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE) -patch-2.6.16-nath323-1.3.bz2 = $(URL_IPFIRE)/patch-2.6.16-nath323-1.3.bz2 +rpi-patches-$(RPI_PATCHES).patch.xz = $(URL_IPFIRE)/rpi-patches-$(RPI_PATCHES).patch.xz + +$(DL_FILE)_MD5 = 64c732cb425eb8787b841d11309bb335 +rpi-patches-$(RPI_PATCHES).patch.xz_MD5 = 0b2fac563b093465f5c6b3d571e57399
-$(DL_FILE)_MD5 = 67ae0ca4e87fb22cecfce94cb90eaee9 -patch-2.6.16-nath323-1.3.bz2_MD5 = f926409ff703a307baf54b57ab75d138
install : $(TARGET)
@@ -123,11 +128,12 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) ln -svf linux-$(VER) $(DIR_SRC)/linux
# Linux Intermediate Queueing Device - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.1-imq.patch + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-imq.patch
# Not report deprecated syscall 1.23 (for kudzu) # cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.25.18-not_report_sysctl_1.23.patch
+ # ipp2p 0.8.2-ipfire cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.0-ipp2p-0.8.2-ipfire.patch
@@ -141,7 +147,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.15-option_add_huawei_android.patch
# Fix uevent PHYSDEVDRIVER - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_ipg-fix-driver-name.patch +# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_ipg-fix-driver-name.patch cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.32.27_mcs7830-fix-driver-name.patch
ifeq "$(KCFG)" "-kirkwood" @@ -157,15 +163,19 @@ ifeq "$(MACHINE_TYPE)" "arm" endif
ifeq "$(KCFG)" "-omap" - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-wlan-fix.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-dvi720p.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-i2c-fix.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-reboot.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.6.40-pandaboard-memcpy.patch + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-0001-panda-wlan-fix.patch + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-0002-panda-i2c.patch + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-panda-reboot.patch cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch endif
+ifeq "$(KCFG)" "-rpi" + # Apply Raspberry Pi kernel patches. (only avail for 3.1.x kernel yet) + cd $(DIR_APP) && xzcat $(DIR_DL)/rpi-patches-$(RPI_PATCHES).patch.xz | patch -Np1 + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-bcm2835-alsamixer.patch + cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/linux-3.2-bcm2835-limit_volume.patch +endif + ifeq "$(HEADERS)" "1" # Install the header files cd $(DIR_APP) && make ARCH=$(HEADERS_ARCH) INSTALL_HDR_PATH=dest headers_install @@ -194,6 +204,11 @@ ifeq "$(KCFG)" "-omap" cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/vmlinuz-$(VER)-$(VERSUFIX) cd $(DIR_APP) && cp -v arch/arm/boot/uImage /boot/uImage-$(VERSUFIX) else +ifeq "$(KCFG)" "-rpi" + cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage + cd /boot && cat first32k.bin $(DIR_APP)/arch/arm/boot/Image > kernel.img + cd $(DIR_APP) && cp -v /boot/kernel.img /boot/vmlinuz-$(VER)-$(VERSUFIX) +else ifeq "$(KCFG)" "-versatile" cd $(DIR_APP) && make $(MAKETUNING) CC="$(KGCC)" zImage cd $(DIR_APP) && cp -v arch/arm/boot/zImage /boot/vmlinuz-$(VER)-$(VERSUFIX) @@ -203,6 +218,7 @@ else endif endif endif +endif cd $(DIR_APP) && cp -v System.map /boot/System.map-$(VER)-$(VERSUFIX) cd $(DIR_APP) && cp -v .config /boot/config-$(VER)-$(VERSUFIX) ln -sf vmlinuz-$(VER)-$(VERSUFIX) /boot/vmlinuz-$(VERSUFIX) @@ -237,10 +253,6 @@ ifeq "$(LASTKERNEL)" "1" echo "options ipv6 disable_ipv6=1" > /etc/modprobe.d/ipv6 endif
- # Remove mISDN modules - rm -rvf /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/isdn/mISDN - rm -rvf /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/isdn/hardware/mISDN - ifneq "$(MACHINE_TYPE)" "arm" # Disable geode_aes modul mv /lib/modules/$(VER)-$(VERSUFIX)/kernel/drivers/crypto/geode-aes.ko \ diff --git a/lfs/mtr b/lfs/mtr new file mode 100644 index 0000000..ca08396 --- /dev/null +++ b/lfs/mtr @@ -0,0 +1,85 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see http://www.gnu.org/licenses/. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.82 + +THISAPP = mtr-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = mtr +PAK_VER = 1 + +DEPS = "" + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 10601ea543fda3e51545c4bce195b64c + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist: + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && ./configure --prefix=/usr + cd $(DIR_APP) && make $(MAKETUNING) + cd $(DIR_APP) && make install + @rm -rf $(DIR_APP) + @$(POSTBUILD) + diff --git a/lfs/strongswan b/lfs/strongswan index 44497d4..d0d533d 100644 --- a/lfs/strongswan +++ b/lfs/strongswan @@ -24,7 +24,7 @@
include Config
-VER = 4.6.3 +VER = 4.6.4
THISAPP = strongswan-$(VER) DL_FILE = $(THISAPP).tar.bz2 @@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 34146e514ced1738b4f2d9e7169bbb52 +$(DL_FILE)_MD5 = 4c0999c42faa0860ae0afc4f8efd9d04
install : $(TARGET)
diff --git a/lfs/tcpick b/lfs/tcpick new file mode 100644 index 0000000..52ba75b --- /dev/null +++ b/lfs/tcpick @@ -0,0 +1,84 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see http://www.gnu.org/licenses/. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.2.1 + +THISAPP = tcpick-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = tcpick +PAK_VER = 1 + +DEPS = "" + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = bb94f2f9ea81aeb645619fbe9b3b9a29 + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist: + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && ./configure --prefix=/usr + cd $(DIR_APP) && make $(MAKETUNING) + cd $(DIR_APP) && make install + @rm -rf $(DIR_APP) + @$(POSTBUILD) diff --git a/make.sh b/make.sh index 7cd9f4d..2c52ad1 100755 --- a/make.sh +++ b/make.sh @@ -25,8 +25,8 @@ NAME="IPFire" # Software name SNAME="ipfire" # Short name VERSION="2.11" # Version number -CORE="59" # Core Level (Filename) -PAKFIRE_CORE="59" # Core Level (PAKFIRE) +CORE="61" # Core Level (Filename) +PAKFIRE_CORE="60" # Core Level (PAKFIRE) GIT_BRANCH=`git status | head -n1 | cut -d" " -f4` # Git Branch SLOGAN="www.ipfire.org" # Software slogan CONFIG_ROOT=/var/ipfire # Configuration rootdir @@ -438,7 +438,7 @@ buildipfire() { ipfiremake igb KCFG="" else # arm-omap kernel build - ipfiremake linux-rpi KCFG="-rpi" + ipfiremake linux3 KCFG="-rpi"
ipfiremake linux3 KCFG="-omap"
@@ -771,6 +771,8 @@ buildipfire() { ipfiremake transmission ipfiremake dpfhack ipfiremake lcd4linux + ipfiremake mtr + ipfiremake tcpick echo Build on $HOSTNAME > $BASEDIR/build/var/ipfire/firebuild cat /proc/version >> $BASEDIR/build/var/ipfire/firebuild echo >> $BASEDIR/build/var/ipfire/firebuild diff --git a/src/initscripts/init.d/collectd b/src/initscripts/init.d/collectd index bdb5ca2..544b3e1 100644 --- a/src/initscripts/init.d/collectd +++ b/src/initscripts/init.d/collectd @@ -86,9 +86,14 @@ case "$1" in sed -i -e "s|^#LoadPlugin swap|LoadPlugin swap|g" /etc/collectd.conf fi
- boot_mesg "Starting Collection daemon..." - /usr/sbin/collectd -C /etc/collectd.conf - evaluate_retval + if [ $(date +%Y) -gt 2011 ]; then + boot_mesg "Starting Collection daemon..." + /usr/sbin/collectd -C /etc/collectd.conf + evaluate_retval + else + boot_mesg "collectd: cannot start with incorrect time ($(date))." + echo_warning; + fi ;; stop) boot_mesg "Stopping Collection daemon..." diff --git a/src/initscripts/init.d/fsresize b/src/initscripts/init.d/fsresize index 8913eb9..3dbd1ad 100644 --- a/src/initscripts/init.d/fsresize +++ b/src/initscripts/init.d/fsresize @@ -2,11 +2,11 @@ ######################################################################## # Begin $rc_base/init.d/fsresize # -# Description : Resize the /var filesystem +# Description : Resize the root filesystem in the background # # Authors : Arne Fitzenreiter - arne_f@ipfire.org # -# Version : 1.00 +# Version : 1.01 # # Notes : # @@ -17,27 +17,24 @@
case "${1}" in start) - boot_mesg "Mounting root file system in read/write mode ..." - mount -o remount,rw / > /dev/null - evaluate_retval - - boot_mesg "Autoresize /var partition to use the whole drive ..." + boot_mesg "Background Autoresize root partition to use the whole drive" # Detect device ROOT=`mount | grep -m1 " / " | cut -d" " -f1`; DRV=${ROOT::`expr length $ROOT`-1} - boot_mesg " * check filesystem on ${DRV}4 before resize ..." - fsck -f -y ${DRV}4
- boot_mesg " * resize ${DRV}4 ..." - resize2fs -p ${DRV}4 - evaluate_retval + boot_mesg "resize ${DRV}3 ..." + nice -n 19 $0 background ${DRV}3 > /dev/null & + ;; + background) + resize2fs -p $2
# Erase symlink, it should run only once - rm -f /etc/rc.d/rcsysinit.d/S26fsresize + rm -f /etc/rc.d/rcsysinit.d/S42fsresize sync - exit 0; + ;; + *) echo "Usage: ${0} {start}" exit 1 diff --git a/src/initscripts/init.d/partresize b/src/initscripts/init.d/partresize index ae70ff9..c78c0c5 100644 --- a/src/initscripts/init.d/partresize +++ b/src/initscripts/init.d/partresize @@ -2,11 +2,11 @@ ######################################################################## # Begin $rc_base/init.d/partresize # -# Description : Resize the /var partition to the drivesize +# Description : Resize the root partition to the drivesize # # Authors : Arne Fitzenreiter - arne_f@ipfire.org # -# Version : 1.00 +# Version : 1.01 # # Notes : # @@ -30,8 +30,8 @@ case "${1}" in DRV=${ROOT::`expr length $ROOT`-1} fi
- boot_mesg "Change Partition 4 to all free space ..." - echo -e 'd\n4\nn\np\n4\n\n\nw\nq\n' | fdisk ${DRV} + boot_mesg "Change Partition $(DRV)3 to all free space ..." + echo -e 'd\n3\nn\np\n3\n\n\nw\nq\n' | fdisk ${DRV}
# Erase symlink, it should run only once rm -f /etc/rc.d/rcsysinit.d/S25partresize diff --git a/src/patches/linux-2.6.40-pandaboard-dvi720p.patch b/src/patches/linux-2.6.40-pandaboard-dvi720p.patch deleted file mode 100755 index 8ec3586..0000000 --- a/src/patches/linux-2.6.40-pandaboard-dvi720p.patch +++ /dev/null @@ -1,51 +0,0 @@ -diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c -index 90485fc..7a92185 100644 ---- a/arch/arm/mach-omap2/board-omap4panda.c -+++ b/arch/arm/mach-omap2/board-omap4panda.c -@@ -583,7 +583,7 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) - - /* Using generic display panel */ - static struct panel_generic_dpi_data omap4_dvi_panel = { -- .name = "generic", -+ .name = "dvi_720p", - .platform_enable = omap4_panda_enable_dvi, - .platform_disable = omap4_panda_disable_dvi, - }; -diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c -index 9c90f75..af8352f 100644 ---- a/drivers/video/omap2/displays/panel-generic-dpi.c -+++ b/drivers/video/omap2/displays/panel-generic-dpi.c -@@ -232,7 +232,32 @@ static struct panel_config generic_dpi_panels[] = { - .power_off_delay = 0, - .name = "powertip_ph480272t", - }, --}; -+ -+ /* Vesa 720p 1280x768 */ -+ { -+ { -+ .x_res = 1280, -+ .y_res = 768, -+ -+ .pixel_clock = 71000, -+ -+ .hfp = 128, -+ .hsw = 64, -+ .hbp = 192, -+ -+ .vfp = 3, -+ .vsw = 7, -+ .vbp = 20, -+ }, -+ .acbi = 0x0, -+ .acb = 0x0, -+ .config = OMAP_DSS_LCD_TFT, -+ .power_on_delay = 0, -+ .power_off_delay = 0, -+ .name = "dvi_720p", -+ }, -+ }; -+ - - struct panel_drv_data { - diff --git a/src/patches/linux-2.6.40-pandaboard-i2c-fix.patch b/src/patches/linux-2.6.40-pandaboard-i2c-fix.patch deleted file mode 100755 index ea847be..0000000 --- a/src/patches/linux-2.6.40-pandaboard-i2c-fix.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c -index 58a58c7..bba0441 100644 ---- a/drivers/i2c/busses/i2c-omap.c -+++ b/drivers/i2c/busses/i2c-omap.c -@@ -276,7 +276,7 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) - - pm_runtime_get_sync(&pdev->dev); - -- if (cpu_is_omap34xx()) { -+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); - omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); -@@ -493,7 +493,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) - OMAP_I2C_IE_AL) | ((dev->fifo_size) ? - (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0); - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); -- if (cpu_is_omap34xx()) { -+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - dev->pscstate = psc; - dev->scllstate = scll; - dev->sclhstate = sclh; diff --git a/src/patches/linux-2.6.40-pandaboard-memcpy.patch b/src/patches/linux-2.6.40-pandaboard-memcpy.patch deleted file mode 100644 index 69e5e6e..0000000 --- a/src/patches/linux-2.6.40-pandaboard-memcpy.patch +++ /dev/null @@ -1,21 +0,0 @@ -arch/arm/lib/uaccess_with_memcpy.c: In function 'pin_page_for_write': -arch/arm/lib/uaccess_with_memcpy.c:45: error: implicit declaration of function 'kmap_atomic' -arch/arm/lib/uaccess_with_memcpy.c:48: error: implicit declaration of function 'kunmap_atomic' -make[2]: *** [arch/arm/lib/uaccess_with_memcpy.o] Error 1 - -Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com> - -diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c -index 8b9b136..66945a6 100644 ---- a/arch/arm/lib/uaccess_with_memcpy.c -+++ b/arch/arm/lib/uaccess_with_memcpy.c -@@ -12,6 +12,7 @@ - #include <linux/kernel.h> - #include <linux/ctype.h> - #include <linux/uaccess.h> -+#include <linux/highmem.h> - #include <linux/rwsem.h> - #include <linux/mm.h> - #include <linux/sched.h> --- -1.7.6 diff --git a/src/patches/linux-2.6.40-pandaboard-reboot.patch b/src/patches/linux-2.6.40-pandaboard-reboot.patch deleted file mode 100644 index 8e37837..0000000 --- a/src/patches/linux-2.6.40-pandaboard-reboot.patch +++ /dev/null @@ -1,29 +0,0 @@ -With commit 3d3f78d752bf, reboot seems to broken on ARM -machines. CPU dies while doing flush_pmd_entry() as part of -setup_mm_for_reboot() - -I know this is not the fix but intention is to report the -issue and also provide temporary fix till it get fixed correctly - -Signed-off-by: Santosh Shilimkar santosh.shilimkar@xxxxxx -Reported-by: Anand Gadiyar gadiyar@xxxxxx ---- -Tested with OMAP4 device. - - arch/arm/kernel/process.c | 1 - - 1 files changed, 0 insertions(+), 1 deletions(-) - -diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c -index e76fcaa..ac370b2 100644 ---- a/arch/arm/kernel/process.c -+++ b/arch/arm/kernel/process.c -@@ -247,7 +247,6 @@ void machine_power_off(void) - - void machine_restart(char *cmd) - { -- machine_shutdown(); - arm_pm_restart(reboot_mode, cmd); - } - --- -1.6.0.4 diff --git a/src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch b/src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch deleted file mode 100644 index dc1182d..0000000 --- a/src/patches/linux-2.6.40-pandaboard-rtc-twl-irq.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -Naur linux-3.0.24.org/drivers/rtc/rtc-twl.c linux-3.0.24/drivers/rtc/rtc-twl.c ---- linux-3.0.24.org/drivers/rtc/rtc-twl.c 2012-03-12 18:58:19.000000000 +0100 -+++ linux-3.0.24/drivers/rtc/rtc-twl.c 2012-03-20 23:24:52.213578926 +0100 -@@ -362,14 +362,6 @@ - int res; - u8 rd_reg; - --#ifdef CONFIG_LOCKDEP -- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which -- * we don't want and can't tolerate. Although it might be -- * friendlier not to borrow this thread context... -- */ -- local_irq_enable(); --#endif -- - res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); - if (res) - goto out; -@@ -462,7 +454,7 @@ - if (ret < 0) - goto out1; - -- ret = request_irq(irq, twl_rtc_interrupt, -+ ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt, - IRQF_TRIGGER_RISING, - dev_name(&rtc->dev), rtc); - if (ret < 0) { diff --git a/src/patches/linux-2.6.40-pandaboard-wlan-fix.patch b/src/patches/linux-2.6.40-pandaboard-wlan-fix.patch deleted file mode 100755 index 1b6b5c4..0000000 --- a/src/patches/linux-2.6.40-pandaboard-wlan-fix.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c -index 1269658..8ec6330 100644 ---- a/arch/arm/mach-omap2/board-omap4panda.c -+++ b/arch/arm/mach-omap2/board-omap4panda.c -@@ -377,6 +377,7 @@ static struct regulator_init_data omap4_panda_vusb = { - static struct regulator_init_data omap4_panda_clk32kg = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, -+ .always_on = true, - }, - }; - diff --git a/src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch b/src/patches/linux-2.x-smsc95xx-add_mac_addr_param.patch old mode 100755 new mode 100644 diff --git a/src/patches/linux-3.2-0001-panda-wlan-fix.patch b/src/patches/linux-3.2-0001-panda-wlan-fix.patch new file mode 100644 index 0000000..a2aaf20 --- /dev/null +++ b/src/patches/linux-3.2-0001-panda-wlan-fix.patch @@ -0,0 +1,12 @@ +diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c +index daa056e..fe03b09 100644 +--- a/arch/arm/mach-omap2/twl-common.c ++++ b/arch/arm/mach-omap2/twl-common.c +@@ -261,6 +261,7 @@ static struct regulator_init_data omap4_vusb_idata = { + static struct regulator_init_data omap4_clk32kg_idata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, ++ .always_on = true, + }, + }; + diff --git a/src/patches/linux-3.2-0002-panda-i2c.patch b/src/patches/linux-3.2-0002-panda-i2c.patch new file mode 100644 index 0000000..fa3f6cc --- /dev/null +++ b/src/patches/linux-3.2-0002-panda-i2c.patch @@ -0,0 +1,51 @@ +diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c +index 7f47092..2a05d3d 100644 +--- a/arch/arm/mach-omap2/id.c ++++ b/arch/arm/mach-omap2/id.c +@@ -389,8 +389,10 @@ static void __init omap4_check_revision(void) + omap_revision = OMAP4430_REV_ES2_1; + break; + case 4: +- default: + omap_revision = OMAP4430_REV_ES2_2; ++ case 6: ++ default: ++ omap_revision = OMAP4430_REV_ES2_3; + } + break; + case 0xb94e: +@@ -403,7 +405,7 @@ static void __init omap4_check_revision(void) + break; + default: + /* Unknown default to latest silicon rev as default */ +- omap_revision = OMAP4430_REV_ES2_2; ++ omap_revision = OMAP4430_REV_ES2_3; + } + + pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, +diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +index 7695e5d..71d3e36 100644 +--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c ++++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +@@ -2257,7 +2257,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { + }; + + static struct omap_i2c_dev_attr i2c_dev_attr = { +- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, ++ .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE | ++ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE, + }; + + /* i2c1 */ +diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h +index 408a12f..e279395 100644 +--- a/arch/arm/plat-omap/include/plat/cpu.h ++++ b/arch/arm/plat-omap/include/plat/cpu.h +@@ -391,6 +391,7 @@ IS_OMAP_TYPE(3517, 0x3517) + #define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8)) + #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) + #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) ++#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8)) + + #define OMAP446X_CLASS 0x44600044 + #define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) diff --git a/src/patches/linux-3.2-bcm2835-alsamixer.patch b/src/patches/linux-3.2-bcm2835-alsamixer.patch new file mode 100644 index 0000000..bfe3d02 --- /dev/null +++ b/src/patches/linux-3.2-bcm2835-alsamixer.patch @@ -0,0 +1,48 @@ +diff -Naur linux-3.2.19.org/sound/arm/bcm2835-ctl.c linux-3.2.19/sound/arm/bcm2835-ctl.c +--- linux-3.2.19.org/sound/arm/bcm2835-ctl.c 2012-06-04 21:11:15.000000000 +0200 ++++ linux-3.2.19/sound/arm/bcm2835-ctl.c 2012-06-04 21:32:37.969298501 +0200 +@@ -33,6 +33,19 @@ + + #include "bcm2835.h" + ++ ++/* functions to convert alsa to chip volume and back. */ ++int alsa2chip(int vol) ++{ ++ return -((vol << 8) / 100); ++} ++ ++int chip2alsa(int vol) ++{ ++ return -((vol * 100) >> 8); ++} ++ ++ + static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) + { +@@ -64,7 +77,7 @@ + BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); + + if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) +- ucontrol->value.integer.value[0] = chip->volume; ++ ucontrol->value.integer.value[0] = chip2alsa(chip->volume); + else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) + ucontrol->value.integer.value[0] = chip->mute; + else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) +@@ -85,13 +98,10 @@ + changed = 1; + } + if (changed +- || (ucontrol->value.integer.value[0] != chip->volume)) { +- int atten; ++ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { + +- chip->volume = ucontrol->value.integer.value[0]; ++ chip->volume = alsa2chip(ucontrol->value.integer.value[0]); + changed = 1; +- atten = -((chip->volume << 8) / 100); +- chip->volume = atten; + } + + } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { diff --git a/src/patches/linux-3.2-bcm2835-limit_volume.patch b/src/patches/linux-3.2-bcm2835-limit_volume.patch new file mode 100644 index 0000000..930033b --- /dev/null +++ b/src/patches/linux-3.2-bcm2835-limit_volume.patch @@ -0,0 +1,12 @@ +diff -Naur linux-3.2.19.org/sound/arm/bcm2835-ctl.c linux-3.2.19/sound/arm/bcm2835-ctl.c +--- linux-3.2.19.org/sound/arm/bcm2835-ctl.c 2012-06-04 22:38:54.000000000 +0200 ++++ linux-3.2.19/sound/arm/bcm2835-ctl.c 2012-06-05 22:37:46.343725845 +0200 +@@ -53,7 +53,7 @@ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = -10240; +- uinfo->value.integer.max = 2303; ++ uinfo->value.integer.max = 400; /* 2303 */ + } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; diff --git a/src/patches/linux-3.2-imq.patch b/src/patches/linux-3.2-imq.patch new file mode 100644 index 0000000..8e8685d --- /dev/null +++ b/src/patches/linux-3.2-imq.patch @@ -0,0 +1,1603 @@ +diff -uNr linux-3.2/drivers/net/imq.c linux-3.2-imq/drivers/net/imq.c +--- linux-3.2/drivers/net/imq.c 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/drivers/net/imq.c 2011-11-04 12:16:10.454992642 +0200 +@@ -0,0 +1,850 @@ ++/* ++ * Pseudo-driver for the intermediate queue device. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Authors: Patrick McHardy, kaber@trash.net ++ * ++ * The first version was written by Martin Devera, devik@cdi.cz ++ * ++ * Credits: Jan Rafaj imq2t@cedric.vabo.cz ++ * - Update patch to 2.4.21 ++ * Sebastian Strollo sstrollo@nortelnetworks.com ++ * - Fix "Dead-loop on netdevice imq"-issue ++ * Marcel Sebek sebek64@post.cz ++ * - Update to 2.6.2-rc1 ++ * ++ * After some time of inactivity there is a group taking care ++ * of IMQ again: http://www.linuximq.net ++ * ++ * ++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7 ++ * including the following changes: ++ * ++ * - Correction of ipv6 support "+"s issue (Hasso Tepper) ++ * - Correction of imq_init_devs() issue that resulted in ++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller) ++ * - Addition of functionality to choose number of IMQ devices ++ * during kernel config (Andre Correa) ++ * - Addition of functionality to choose how IMQ hooks on ++ * PRE and POSTROUTING (after or before NAT) (Andre Correa) ++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa) ++ * ++ * ++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were ++ * released with almost no problems. 2.6.14-x was released ++ * with some important changes: nfcache was removed; After ++ * some weeks of trouble we figured out that some IMQ fields ++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header. ++ * These functions are correctly patched by this new patch version. ++ * ++ * Thanks for all who helped to figure out all the problems with ++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX, ++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully ++ * I didn't forget anybody). I apologize again for my lack of time. ++ * ++ * ++ * 2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead ++ * of qdisc_restart() and moved qdisc_run() to tasklet to avoid ++ * recursive locking. New initialization routines to fix 'rmmod' not ++ * working anymore. Used code from ifb.c. (Jussi Kivilinna) ++ * ++ * 2008/08/06 - 2.6.26 - (JK) ++ * - Replaced tasklet with 'netif_schedule()'. ++ * - Cleaned up and added comments for imq_nf_queue(). ++ * ++ * 2009/04/12 ++ * - Add skb_save_cb/skb_restore_cb helper functions for backuping ++ * control buffer. This is needed because qdisc-layer on kernels ++ * 2.6.27 and newer overwrite control buffer. (Jussi Kivilinna) ++ * - Add better locking for IMQ device. Hopefully this will solve ++ * SMP issues. (Jussi Kivilinna) ++ * - Port to 2.6.27 ++ * - Port to 2.6.28 ++ * - Port to 2.6.29 + fix rmmod not working ++ * ++ * 2009/04/20 - (Jussi Kivilinna) ++ * - Use netdevice feature flags to avoid extra packet handling ++ * by core networking layer and possibly increase performance. ++ * ++ * 2009/09/26 - (Jussi Kivilinna) ++ * - Add imq_nf_reinject_lockless to fix deadlock with ++ * imq_nf_queue/imq_nf_reinject. ++ * ++ * 2009/12/08 - (Jussi Kivilinna) ++ * - Port to 2.6.32 ++ * - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit() ++ * - Also add better error checking for skb->nf_queue_entry usage ++ * ++ * 2010/02/25 - (Jussi Kivilinna) ++ * - Port to 2.6.33 ++ * ++ * 2010/08/15 - (Jussi Kivilinna) ++ * - Port to 2.6.35 ++ * - Simplify hook registration by using nf_register_hooks. ++ * - nf_reinject doesn't need spinlock around it, therefore remove ++ * imq_nf_reinject function. Other nf_reinject users protect ++ * their own data with spinlock. With IMQ however all data is ++ * needed is stored per skbuff, so no locking is needed. ++ * - Changed IMQ to use 'separate' NF_IMQ_QUEUE instead of ++ * NF_QUEUE, this allows working coexistance of IMQ and other ++ * NF_QUEUE users. ++ * - Make IMQ multi-queue. Number of IMQ device queues can be ++ * increased with 'numqueues' module parameters. Default number ++ * of queues is 1, in other words by default IMQ works as ++ * single-queue device. Multi-queue selection is based on ++ * IFB multi-queue patch by Changli Gao xiaosuo@gmail.com. ++ * ++ * 2011/03/18 - (Jussi Kivilinna) ++ * - Port to 2.6.38 ++ * ++ * 2011/07/12 - (syoder89@gmail.com) ++ * - Crash fix that happens when the receiving interface has more ++ * than one queue (add missing skb_set_queue_mapping in ++ * imq_select_queue). ++ * ++ * 2011/07/26 - (Jussi Kivilinna) ++ * - Add queue mapping checks for packets exiting IMQ. ++ * - Port to 3.0 ++ * ++ * 2011/08/16 - (Jussi Kivilinna) ++ * - Clear IFF_TX_SKB_SHARING flag that was added for linux 3.0.2 ++ * ++ * 2011/11/03 - Germano Michel germanomichel@gmail.com ++ * - Fix IMQ for net namespaces ++ * ++ * 2011/11/04 - Jussi Kivilinna jussi.kivilinna@mbnet.fi ++ * - Port to 3.1 ++ * - Clean-up, move 'get imq device pointer by imqX name' to ++ * separate function from imq_nf_queue(). ++ * ++ * Also, many thanks to pablo Sebastian Greco for making the initial ++ * patch and to those who helped the testing. ++ * ++ * More info at: http://www.linuximq.net/ (Andre Correa) ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/moduleparam.h> ++#include <linux/list.h> ++#include <linux/skbuff.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/rtnetlink.h> ++#include <linux/if_arp.h> ++#include <linux/netfilter.h> ++#include <linux/netfilter_ipv4.h> ++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) ++ #include <linux/netfilter_ipv6.h> ++#endif ++#include <linux/imq.h> ++#include <net/pkt_sched.h> ++#include <net/netfilter/nf_queue.h> ++#include <net/sock.h> ++#include <linux/ip.h> ++#include <linux/ipv6.h> ++#include <linux/if_vlan.h> ++#include <linux/if_pppox.h> ++#include <net/ip.h> ++#include <net/ipv6.h> ++ ++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num); ++ ++static nf_hookfn imq_nf_hook; ++ ++static struct nf_hook_ops imq_ops[] = { ++ { ++ /* imq_ingress_ipv4 */ ++ .hook = imq_nf_hook, ++ .owner = THIS_MODULE, ++ .pf = PF_INET, ++ .hooknum = NF_INET_PRE_ROUTING, ++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) ++ .priority = NF_IP_PRI_MANGLE + 1, ++#else ++ .priority = NF_IP_PRI_NAT_DST + 1, ++#endif ++ }, ++ { ++ /* imq_egress_ipv4 */ ++ .hook = imq_nf_hook, ++ .owner = THIS_MODULE, ++ .pf = PF_INET, ++ .hooknum = NF_INET_POST_ROUTING, ++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA) ++ .priority = NF_IP_PRI_LAST, ++#else ++ .priority = NF_IP_PRI_NAT_SRC - 1, ++#endif ++ }, ++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) ++ { ++ /* imq_ingress_ipv6 */ ++ .hook = imq_nf_hook, ++ .owner = THIS_MODULE, ++ .pf = PF_INET6, ++ .hooknum = NF_INET_PRE_ROUTING, ++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) ++ .priority = NF_IP6_PRI_MANGLE + 1, ++#else ++ .priority = NF_IP6_PRI_NAT_DST + 1, ++#endif ++ }, ++ { ++ /* imq_egress_ipv6 */ ++ .hook = imq_nf_hook, ++ .owner = THIS_MODULE, ++ .pf = PF_INET6, ++ .hooknum = NF_INET_POST_ROUTING, ++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA) ++ .priority = NF_IP6_PRI_LAST, ++#else ++ .priority = NF_IP6_PRI_NAT_SRC - 1, ++#endif ++ }, ++#endif ++}; ++ ++#if defined(CONFIG_IMQ_NUM_DEVS) ++static int numdevs = CONFIG_IMQ_NUM_DEVS; ++#else ++static int numdevs = IMQ_MAX_DEVS; ++#endif ++ ++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS]; ++ ++#define IMQ_MAX_QUEUES 32 ++static int numqueues = 1; ++static u32 imq_hashrnd; ++ ++static inline __be16 pppoe_proto(const struct sk_buff *skb) ++{ ++ return *((__be16 *)(skb_mac_header(skb) + ETH_HLEN + ++ sizeof(struct pppoe_hdr))); ++} ++ ++static u16 imq_hash(struct net_device *dev, struct sk_buff *skb) ++{ ++ unsigned int pull_len; ++ u16 protocol = skb->protocol; ++ u32 addr1, addr2; ++ u32 hash, ihl = 0; ++ union { ++ u16 in16[2]; ++ u32 in32; ++ } ports; ++ u8 ip_proto; ++ ++ pull_len = 0; ++ ++recheck: ++ switch (protocol) { ++ case htons(ETH_P_8021Q): { ++ if (unlikely(skb_pull(skb, VLAN_HLEN) == NULL)) ++ goto other; ++ ++ pull_len += VLAN_HLEN; ++ skb->network_header += VLAN_HLEN; ++ ++ protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; ++ goto recheck; ++ } ++ ++ case htons(ETH_P_PPP_SES): { ++ if (unlikely(skb_pull(skb, PPPOE_SES_HLEN) == NULL)) ++ goto other; ++ ++ pull_len += PPPOE_SES_HLEN; ++ skb->network_header += PPPOE_SES_HLEN; ++ ++ protocol = pppoe_proto(skb); ++ goto recheck; ++ } ++ ++ case htons(ETH_P_IP): { ++ const struct iphdr *iph = ip_hdr(skb); ++ ++ if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr)))) ++ goto other; ++ ++ addr1 = iph->daddr; ++ addr2 = iph->saddr; ++ ++ ip_proto = !(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ? ++ iph->protocol : 0; ++ ihl = ip_hdrlen(skb); ++ ++ break; ++ } ++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) ++ case htons(ETH_P_IPV6): { ++ const struct ipv6hdr *iph = ipv6_hdr(skb); ++ ++ if (unlikely(!pskb_may_pull(skb, sizeof(struct ipv6hdr)))) ++ goto other; ++ ++ addr1 = iph->daddr.s6_addr32[3]; ++ addr2 = iph->saddr.s6_addr32[3]; ++ ihl = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &ip_proto); ++ if (unlikely(ihl < 0)) ++ goto other; ++ ++ break; ++ } ++#endif ++ default: ++other: ++ if (pull_len != 0) { ++ skb_push(skb, pull_len); ++ skb->network_header -= pull_len; ++ } ++ ++ return (u16)(ntohs(protocol) % dev->real_num_tx_queues); ++ } ++ ++ if (addr1 > addr2) ++ swap(addr1, addr2); ++ ++ switch (ip_proto) { ++ case IPPROTO_TCP: ++ case IPPROTO_UDP: ++ case IPPROTO_DCCP: ++ case IPPROTO_ESP: ++ case IPPROTO_AH: ++ case IPPROTO_SCTP: ++ case IPPROTO_UDPLITE: { ++ if (likely(skb_copy_bits(skb, ihl, &ports.in32, 4) >= 0)) { ++ if (ports.in16[0] > ports.in16[1]) ++ swap(ports.in16[0], ports.in16[1]); ++ break; ++ } ++ /* fall-through */ ++ } ++ default: ++ ports.in32 = 0; ++ break; ++ } ++ ++ if (pull_len != 0) { ++ skb_push(skb, pull_len); ++ skb->network_header -= pull_len; ++ } ++ ++ hash = jhash_3words(addr1, addr2, ports.in32, imq_hashrnd ^ ip_proto); ++ ++ return (u16)(((u64)hash * dev->real_num_tx_queues) >> 32); ++} ++ ++static inline bool sk_tx_queue_recorded(struct sock *sk) ++{ ++ return (sk_tx_queue_get(sk) >= 0); ++} ++ ++static struct netdev_queue *imq_select_queue(struct net_device *dev, ++ struct sk_buff *skb) ++{ ++ u16 queue_index = 0; ++ u32 hash; ++ ++ if (likely(dev->real_num_tx_queues == 1)) ++ goto out; ++ ++ /* IMQ can be receiving ingress or engress packets. */ ++ ++ /* Check first for if rx_queue is set */ ++ if (skb_rx_queue_recorded(skb)) { ++ queue_index = skb_get_rx_queue(skb); ++ goto out; ++ } ++ ++ /* Check if socket has tx_queue set */ ++ if (sk_tx_queue_recorded(skb->sk)) { ++ queue_index = sk_tx_queue_get(skb->sk); ++ goto out; ++ } ++ ++ /* Try use socket hash */ ++ if (skb->sk && skb->sk->sk_hash) { ++ hash = skb->sk->sk_hash; ++ queue_index = ++ (u16)(((u64)hash * dev->real_num_tx_queues) >> 32); ++ goto out; ++ } ++ ++ /* Generate hash from packet data */ ++ queue_index = imq_hash(dev, skb); ++ ++out: ++ if (unlikely(queue_index >= dev->real_num_tx_queues)) ++ queue_index = (u16)((u32)queue_index % dev->real_num_tx_queues); ++ ++ skb_set_queue_mapping(skb, queue_index); ++ return netdev_get_tx_queue(dev, queue_index); ++} ++ ++static struct net_device_stats *imq_get_stats(struct net_device *dev) ++{ ++ return &dev->stats; ++} ++ ++/* called for packets kfree'd in qdiscs at places other than enqueue */ ++static void imq_skb_destructor(struct sk_buff *skb) ++{ ++ struct nf_queue_entry *entry = skb->nf_queue_entry; ++ ++ skb->nf_queue_entry = NULL; ++ ++ if (entry) { ++ nf_queue_entry_release_refs(entry); ++ kfree(entry); ++ } ++ ++ skb_restore_cb(skb); /* kfree backup */ ++} ++ ++static void imq_done_check_queue_mapping(struct sk_buff *skb, ++ struct net_device *dev) ++{ ++ unsigned int queue_index; ++ ++ /* Don't let queue_mapping be left too large after exiting IMQ */ ++ if (likely(skb->dev != dev && skb->dev != NULL)) { ++ queue_index = skb_get_queue_mapping(skb); ++ if (unlikely(queue_index >= skb->dev->real_num_tx_queues)) { ++ queue_index = (u16)((u32)queue_index % ++ skb->dev->real_num_tx_queues); ++ skb_set_queue_mapping(skb, queue_index); ++ } ++ } else { ++ /* skb->dev was IMQ device itself or NULL, be on safe side and ++ * just clear queue mapping. ++ */ ++ skb_set_queue_mapping(skb, 0); ++ } ++} ++ ++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct nf_queue_entry *entry = skb->nf_queue_entry; ++ ++ skb->nf_queue_entry = NULL; ++ dev->trans_start = jiffies; ++ ++ dev->stats.tx_bytes += skb->len; ++ dev->stats.tx_packets++; ++ ++ if (unlikely(entry == NULL)) { ++ /* We don't know what is going on here.. packet is queued for ++ * imq device, but (probably) not by us. ++ * ++ * If this packet was not send here by imq_nf_queue(), then ++ * skb_save_cb() was not used and skb_free() should not show: ++ * WARNING: IMQ: kfree_skb: skb->cb_next:.. ++ * and/or ++ * WARNING: IMQ: kfree_skb: skb->nf_queue_entry... ++ * ++ * However if this message is shown, then IMQ is somehow broken ++ * and you should report this to linuximq.net. ++ */ ++ ++ /* imq_dev_xmit is black hole that eats all packets, report that ++ * we eat this packet happily and increase dropped counters. ++ */ ++ ++ dev->stats.tx_dropped++; ++ dev_kfree_skb(skb); ++ ++ return NETDEV_TX_OK; ++ } ++ ++ skb_restore_cb(skb); /* restore skb->cb */ ++ ++ skb->imq_flags = 0; ++ skb->destructor = NULL; ++ ++ imq_done_check_queue_mapping(skb, dev); ++ ++ nf_reinject(entry, NF_ACCEPT); ++ ++ return NETDEV_TX_OK; ++} ++ ++static struct net_device *get_imq_device_by_index(int index) ++{ ++ struct net_device *dev = NULL; ++ struct net *net; ++ char buf[8]; ++ ++ /* get device by name and cache result */ ++ snprintf(buf, sizeof(buf), "imq%d", index); ++ ++ /* Search device from all namespaces. */ ++ for_each_net(net) { ++ dev = dev_get_by_name(net, buf); ++ if (dev) ++ break; ++ } ++ ++ if (WARN_ON_ONCE(dev == NULL)) { ++ /* IMQ device not found. Exotic config? */ ++ return ERR_PTR(-ENODEV); ++ } ++ ++ imq_devs_cache[index] = dev; ++ dev_put(dev); ++ ++ return dev; ++} ++ ++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num) ++{ ++ struct net_device *dev; ++ struct sk_buff *skb_orig, *skb, *skb_shared; ++ struct Qdisc *q; ++ struct netdev_queue *txq; ++ spinlock_t *root_lock; ++ int users, index; ++ int retval = -EINVAL; ++ unsigned int orig_queue_index; ++ ++ index = entry->skb->imq_flags & IMQ_F_IFMASK; ++ if (unlikely(index > numdevs - 1)) { ++ if (net_ratelimit()) ++ printk(KERN_WARNING ++ "IMQ: invalid device specified, highest is %u\n", ++ numdevs - 1); ++ retval = -EINVAL; ++ goto out; ++ } ++ ++ /* check for imq device by index from cache */ ++ dev = imq_devs_cache[index]; ++ if (unlikely(!dev)) { ++ dev = get_imq_device_by_index(index); ++ if (IS_ERR(dev)) { ++ retval = PTR_ERR(dev); ++ goto out; ++ } ++ } ++ ++ if (unlikely(!(dev->flags & IFF_UP))) { ++ entry->skb->imq_flags = 0; ++ nf_reinject(entry, NF_ACCEPT); ++ retval = 0; ++ goto out; ++ } ++ dev->last_rx = jiffies; ++ ++ skb = entry->skb; ++ skb_orig = NULL; ++ ++ /* skb has owner? => make clone */ ++ if (unlikely(skb->destructor)) { ++ skb_orig = skb; ++ skb = skb_clone(skb, GFP_ATOMIC); ++ if (unlikely(!skb)) { ++ retval = -ENOMEM; ++ goto out; ++ } ++ entry->skb = skb; ++ } ++ ++ skb->nf_queue_entry = entry; ++ ++ dev->stats.rx_bytes += skb->len; ++ dev->stats.rx_packets++; ++ ++ if (!skb->dev) { ++ /* skb->dev == NULL causes problems, try the find cause. */ ++ if (net_ratelimit()) { ++ dev_warn(&dev->dev, ++ "received packet with skb->dev == NULL\n"); ++ dump_stack(); ++ } ++ ++ skb->dev = dev; ++ } ++ ++ /* Disables softirqs for lock below */ ++ rcu_read_lock_bh(); ++ ++ /* Multi-queue selection */ ++ orig_queue_index = skb_get_queue_mapping(skb); ++ txq = imq_select_queue(dev, skb); ++ ++ q = rcu_dereference(txq->qdisc); ++ if (unlikely(!q->enqueue)) ++ goto packet_not_eaten_by_imq_dev; ++ ++ root_lock = qdisc_lock(q); ++ spin_lock(root_lock); ++ ++ users = atomic_read(&skb->users); ++ ++ skb_shared = skb_get(skb); /* increase reference count by one */ ++ skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will ++ overwrite it */ ++ qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */ ++ ++ if (likely(atomic_read(&skb_shared->users) == users + 1)) { ++ kfree_skb(skb_shared); /* decrease reference count by one */ ++ ++ skb->destructor = &imq_skb_destructor; ++ ++ /* cloned? */ ++ if (unlikely(skb_orig)) ++ kfree_skb(skb_orig); /* free original */ ++ ++ spin_unlock(root_lock); ++ rcu_read_unlock_bh(); ++ ++ /* schedule qdisc dequeue */ ++ __netif_schedule(q); ++ ++ retval = 0; ++ goto out; ++ } else { ++ skb_restore_cb(skb_shared); /* restore skb->cb */ ++ skb->nf_queue_entry = NULL; ++ /* qdisc dropped packet and decreased skb reference count of ++ * skb, so we don't really want to and try refree as that would ++ * actually destroy the skb. */ ++ spin_unlock(root_lock); ++ goto packet_not_eaten_by_imq_dev; ++ } ++ ++packet_not_eaten_by_imq_dev: ++ skb_set_queue_mapping(skb, orig_queue_index); ++ rcu_read_unlock_bh(); ++ ++ /* cloned? restore original */ ++ if (unlikely(skb_orig)) { ++ kfree_skb(skb); ++ entry->skb = skb_orig; ++ } ++ retval = -1; ++out: ++ return retval; ++} ++ ++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb, ++ const struct net_device *indev, ++ const struct net_device *outdev, ++ int (*okfn)(struct sk_buff *)) ++{ ++ return (pskb->imq_flags & IMQ_F_ENQUEUE) ? NF_IMQ_QUEUE : NF_ACCEPT; ++} ++ ++static int imq_close(struct net_device *dev) ++{ ++ netif_stop_queue(dev); ++ return 0; ++} ++ ++static int imq_open(struct net_device *dev) ++{ ++ netif_start_queue(dev); ++ return 0; ++} ++ ++static const struct net_device_ops imq_netdev_ops = { ++ .ndo_open = imq_open, ++ .ndo_stop = imq_close, ++ .ndo_start_xmit = imq_dev_xmit, ++ .ndo_get_stats = imq_get_stats, ++}; ++ ++static void imq_setup(struct net_device *dev) ++{ ++ dev->netdev_ops = &imq_netdev_ops; ++ dev->type = ARPHRD_VOID; ++ dev->mtu = 16000; /* too small? */ ++ dev->tx_queue_len = 11000; /* too big? */ ++ dev->flags = IFF_NOARP; ++ dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | ++ NETIF_F_GSO | NETIF_F_HW_CSUM | ++ NETIF_F_HIGHDMA; ++ dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | ++ IFF_TX_SKB_SHARING); ++} ++ ++static int imq_validate(struct nlattr *tb[], struct nlattr *data[]) ++{ ++ int ret = 0; ++ ++ if (tb[IFLA_ADDRESS]) { ++ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) { ++ ret = -EINVAL; ++ goto end; ++ } ++ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) { ++ ret = -EADDRNOTAVAIL; ++ goto end; ++ } ++ } ++ return 0; ++end: ++ printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret); ++ return ret; ++} ++ ++static struct rtnl_link_ops imq_link_ops __read_mostly = { ++ .kind = "imq", ++ .priv_size = 0, ++ .setup = imq_setup, ++ .validate = imq_validate, ++}; ++ ++static const struct nf_queue_handler imq_nfqh = { ++ .name = "imq", ++ .outfn = imq_nf_queue, ++}; ++ ++static int __init imq_init_hooks(void) ++{ ++ int ret; ++ ++ nf_register_queue_imq_handler(&imq_nfqh); ++ ++ ret = nf_register_hooks(imq_ops, ARRAY_SIZE(imq_ops)); ++ if (ret < 0) ++ nf_unregister_queue_imq_handler(); ++ ++ return ret; ++} ++ ++static int __init imq_init_one(int index) ++{ ++ struct net_device *dev; ++ int ret; ++ ++ dev = alloc_netdev_mq(0, "imq%d", imq_setup, numqueues); ++ if (!dev) ++ return -ENOMEM; ++ ++ ret = dev_alloc_name(dev, dev->name); ++ if (ret < 0) ++ goto fail; ++ ++ dev->rtnl_link_ops = &imq_link_ops; ++ ret = register_netdevice(dev); ++ if (ret < 0) ++ goto fail; ++ ++ return 0; ++fail: ++ free_netdev(dev); ++ return ret; ++} ++ ++static int __init imq_init_devs(void) ++{ ++ int err, i; ++ ++ if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) { ++ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n", ++ IMQ_MAX_DEVS); ++ return -EINVAL; ++ } ++ ++ if (numqueues < 1 || numqueues > IMQ_MAX_QUEUES) { ++ printk(KERN_ERR "IMQ: numqueues has to be betweed 1 and %u\n", ++ IMQ_MAX_QUEUES); ++ return -EINVAL; ++ } ++ ++ get_random_bytes(&imq_hashrnd, sizeof(imq_hashrnd)); ++ ++ rtnl_lock(); ++ err = __rtnl_link_register(&imq_link_ops); ++ ++ for (i = 0; i < numdevs && !err; i++) ++ err = imq_init_one(i); ++ ++ if (err) { ++ __rtnl_link_unregister(&imq_link_ops); ++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache)); ++ } ++ rtnl_unlock(); ++ ++ return err; ++} ++ ++static int __init imq_init_module(void) ++{ ++ int err; ++ ++#if defined(CONFIG_IMQ_NUM_DEVS) ++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16); ++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2); ++ BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK); ++#endif ++ ++ err = imq_init_devs(); ++ if (err) { ++ printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n"); ++ return err; ++ } ++ ++ err = imq_init_hooks(); ++ if (err) { ++ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n"); ++ rtnl_link_unregister(&imq_link_ops); ++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache)); ++ return err; ++ } ++ ++ printk(KERN_INFO "IMQ driver loaded successfully. " ++ "(numdevs = %d, numqueues = %d)\n", numdevs, numqueues); ++ ++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB) ++ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n"); ++#else ++ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n"); ++#endif ++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB) ++ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n"); ++#else ++ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n"); ++#endif ++ ++ return 0; ++} ++ ++static void __exit imq_unhook(void) ++{ ++ nf_unregister_hooks(imq_ops, ARRAY_SIZE(imq_ops)); ++ nf_unregister_queue_imq_handler(); ++} ++ ++static void __exit imq_cleanup_devs(void) ++{ ++ rtnl_link_unregister(&imq_link_ops); ++ memset(imq_devs_cache, 0, sizeof(imq_devs_cache)); ++} ++ ++static void __exit imq_exit_module(void) ++{ ++ imq_unhook(); ++ imq_cleanup_devs(); ++ printk(KERN_INFO "IMQ driver unloaded successfully.\n"); ++} ++ ++module_init(imq_init_module); ++module_exit(imq_exit_module); ++ ++module_param(numdevs, int, 0); ++module_param(numqueues, int, 0); ++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will " ++ "be created)"); ++MODULE_PARM_DESC(numqueues, "number of queues per IMQ device"); ++MODULE_AUTHOR("http://www.linuximq.net"); ++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See " ++ "http://www.linuximq.net/ for more information."); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_RTNL_LINK("imq"); ++ +diff -uNr linux-3.2/drivers/net/Kconfig linux-3.2-imq/drivers/net/Kconfig +--- linux-3.2/drivers/net/Kconfig 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/drivers/net/Kconfig 2011-11-04 11:12:52.106390309 +0200 +@@ -90,6 +90,125 @@ + To compile this driver as a module, choose M here: the module + will be called eql. If unsure, say N. + ++config IMQ ++ tristate "IMQ (intermediate queueing device) support" ++ depends on NETDEVICES && NETFILTER ++ ---help--- ++ The IMQ device(s) is used as placeholder for QoS queueing ++ disciplines. Every packet entering/leaving the IP stack can be ++ directed through the IMQ device where it's enqueued/dequeued to the ++ attached qdisc. This allows you to treat network devices as classes ++ and distribute bandwidth among them. Iptables is used to specify ++ through which IMQ device, if any, packets travel. ++ ++ More information at: http://www.linuximq.net/ ++ ++ To compile this driver as a module, choose M here: the module ++ will be called imq. If unsure, say N. ++ ++choice ++ prompt "IMQ behavior (PRE/POSTROUTING)" ++ depends on IMQ ++ default IMQ_BEHAVIOR_AB ++ help ++ This setting defines how IMQ behaves in respect to its ++ hooking in PREROUTING and POSTROUTING. ++ ++ IMQ can work in any of the following ways: ++ ++ PREROUTING | POSTROUTING ++ -----------------|------------------- ++ #1 After NAT | After NAT ++ #2 After NAT | Before NAT ++ #3 Before NAT | After NAT ++ #4 Before NAT | Before NAT ++ ++ The default behavior is to hook before NAT on PREROUTING ++ and after NAT on POSTROUTING (#3). ++ ++ This settings are specially usefull when trying to use IMQ ++ to shape NATed clients. ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ ++config IMQ_BEHAVIOR_AA ++ bool "IMQ AA" ++ help ++ This setting defines how IMQ behaves in respect to its ++ hooking in PREROUTING and POSTROUTING. ++ ++ Choosing this option will make IMQ hook like this: ++ ++ PREROUTING: After NAT ++ POSTROUTING: After NAT ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ ++config IMQ_BEHAVIOR_AB ++ bool "IMQ AB" ++ help ++ This setting defines how IMQ behaves in respect to its ++ hooking in PREROUTING and POSTROUTING. ++ ++ Choosing this option will make IMQ hook like this: ++ ++ PREROUTING: After NAT ++ POSTROUTING: Before NAT ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ ++config IMQ_BEHAVIOR_BA ++ bool "IMQ BA" ++ help ++ This setting defines how IMQ behaves in respect to its ++ hooking in PREROUTING and POSTROUTING. ++ ++ Choosing this option will make IMQ hook like this: ++ ++ PREROUTING: Before NAT ++ POSTROUTING: After NAT ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ ++config IMQ_BEHAVIOR_BB ++ bool "IMQ BB" ++ help ++ This setting defines how IMQ behaves in respect to its ++ hooking in PREROUTING and POSTROUTING. ++ ++ Choosing this option will make IMQ hook like this: ++ ++ PREROUTING: Before NAT ++ POSTROUTING: Before NAT ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ ++endchoice ++ ++config IMQ_NUM_DEVS ++ int "Number of IMQ devices" ++ range 2 16 ++ depends on IMQ ++ default "16" ++ help ++ This setting defines how many IMQ devices will be created. ++ ++ The default value is 16. ++ ++ More information can be found at: www.linuximq.net ++ ++ If not sure leave the default settings alone. ++ + config NET_FC + bool "Fibre Channel driver support" + depends on SCSI && PCI +diff -uNr linux-3.2/drivers/net/Makefile linux-3.2-imq/drivers/net/Makefile +--- linux-3.2/drivers/net/Makefile 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/drivers/net/Makefile 2011-11-04 11:12:52.106390309 +0200 +@@ -8,6 +8,7 @@ + obj-$(CONFIG_BONDING) += bonding/ + obj-$(CONFIG_DUMMY) += dummy.o + obj-$(CONFIG_EQUALIZER) += eql.o ++obj-$(CONFIG_IMQ) += imq.o + obj-$(CONFIG_IFB) += ifb.o + obj-$(CONFIG_MACVLAN) += macvlan.o + obj-$(CONFIG_MACVTAP) += macvtap.o +diff -uNr linux-3.2/include/linux/imq.h linux-3.2-imq/include/linux/imq.h +--- linux-3.2/include/linux/imq.h 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/include/linux/imq.h 2011-11-04 11:12:52.109723710 +0200 +@@ -0,0 +1,13 @@ ++#ifndef _IMQ_H ++#define _IMQ_H ++ ++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */ ++#define IMQ_F_BITS 5 ++ ++#define IMQ_F_IFMASK 0x0f ++#define IMQ_F_ENQUEUE 0x10 ++ ++#define IMQ_MAX_DEVS (IMQ_F_IFMASK + 1) ++ ++#endif /* _IMQ_H */ ++ +diff -uNr linux-3.2/include/linux/netfilter/xt_IMQ.h linux-3.2-imq/include/linux/netfilter/xt_IMQ.h +--- linux-3.2/include/linux/netfilter/xt_IMQ.h 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/include/linux/netfilter/xt_IMQ.h 2011-11-04 11:12:52.109723710 +0200 +@@ -0,0 +1,9 @@ ++#ifndef _XT_IMQ_H ++#define _XT_IMQ_H ++ ++struct xt_imq_info { ++ unsigned int todev; /* target imq device */ ++}; ++ ++#endif /* _XT_IMQ_H */ ++ +diff -uNr linux-3.2/include/linux/netfilter.h linux-3.2-imq/include/linux/netfilter.h +--- linux-3.2/include/linux/netfilter.h 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/include/linux/netfilter.h 2011-11-04 11:12:52.109723710 +0200 +@@ -22,7 +22,8 @@ + #define NF_QUEUE 3 + #define NF_REPEAT 4 + #define NF_STOP 5 +-#define NF_MAX_VERDICT NF_STOP ++#define NF_IMQ_QUEUE 6 ++#define NF_MAX_VERDICT NF_IMQ_QUEUE + + /* we overload the higher bits for encoding auxiliary data such as the queue + * number or errno values. Not nice, but better than additional function +diff -uNr linux-3.2/include/linux/netfilter_ipv4/ipt_IMQ.h linux-3.2-imq/include/linux/netfilter_ipv4/ipt_IMQ.h +--- linux-3.2/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2011-11-04 11:12:52.109723710 +0200 +@@ -0,0 +1,10 @@ ++#ifndef _IPT_IMQ_H ++#define _IPT_IMQ_H ++ ++/* Backwards compatibility for old userspace */ ++#include <linux/netfilter/xt_IMQ.h> ++ ++#define ipt_imq_info xt_imq_info ++ ++#endif /* _IPT_IMQ_H */ ++ +diff -uNr linux-3.2/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-3.2-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h +--- linux-3.2/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2011-11-04 11:12:52.113057113 +0200 +@@ -0,0 +1,10 @@ ++#ifndef _IP6T_IMQ_H ++#define _IP6T_IMQ_H ++ ++/* Backwards compatibility for old userspace */ ++#include <linux/netfilter/xt_IMQ.h> ++ ++#define ip6t_imq_info xt_imq_info ++ ++#endif /* _IP6T_IMQ_H */ ++ +diff -uNr linux-3.2/include/linux/skbuff.h linux-3.2-imq/include/linux/skbuff.h +--- linux-3.2/include/linux/skbuff.h 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/include/linux/skbuff.h 2011-11-04 11:12:52.116390515 +0200 +@@ -30,6 +30,9 @@ + #include <linux/dmaengine.h> + #include <linux/hrtimer.h> + #include <linux/dma-mapping.h> ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++#include <linux/imq.h> ++#endif + + /* Don't change this without changing skb_csum_unnecessary! */ + #define CHECKSUM_NONE 0 +@@ -386,6 +389,9 @@ + * first. This is owned by whoever has the skb queued ATM. + */ + char cb[48] __aligned(8); ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ void *cb_next; ++#endif + + unsigned long _skb_refdst; + #ifdef CONFIG_XFRM +@@ -424,6 +430,9 @@ + #ifdef NET_SKBUFF_NF_DEFRAG_NEEDED + struct sk_buff *nfct_reasm; + #endif ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ struct nf_queue_entry *nf_queue_entry; ++#endif + #ifdef CONFIG_BRIDGE_NETFILTER + struct nf_bridge_info *nf_bridge; + #endif +@@ -449,6 +458,10 @@ + + /* 0/13 bit hole */ + ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ __u8 imq_flags:IMQ_F_BITS; ++#endif ++ + #ifdef CONFIG_NET_DMA + dma_cookie_t dma_cookie; + #endif +@@ -535,6 +548,12 @@ + return (struct rtable *)skb_dst(skb); + } + ++ ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++extern int skb_save_cb(struct sk_buff *skb); ++extern int skb_restore_cb(struct sk_buff *skb); ++#endif ++ + extern void kfree_skb(struct sk_buff *skb); + extern void consume_skb(struct sk_buff *skb); + extern void __kfree_skb(struct sk_buff *skb); +@@ -2368,6 +2387,10 @@ + dst->nfct_reasm = src->nfct_reasm; + nf_conntrack_get_reasm(src->nfct_reasm); + #endif ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ dst->imq_flags = src->imq_flags; ++ dst->nf_queue_entry = src->nf_queue_entry; ++#endif + #ifdef CONFIG_BRIDGE_NETFILTER + dst->nf_bridge = src->nf_bridge; + nf_bridge_get(src->nf_bridge); +diff -uNr linux-3.2/include/net/netfilter/nf_queue.h linux-3.2-imq/include/net/netfilter/nf_queue.h +--- linux-3.2/include/net/netfilter/nf_queue.h 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/include/net/netfilter/nf_queue.h 2011-11-04 11:12:52.116390515 +0200 +@@ -30,5 +30,11 @@ + const struct nf_queue_handler *qh); + extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh); + extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict); ++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry); ++ ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh); ++extern void nf_unregister_queue_imq_handler(void); ++#endif + + #endif /* _NF_QUEUE_H */ +diff -uNr linux-3.2/net/core/dev.c linux-3.2-imq/net/core/dev.c +--- linux-3.2/net/core/dev.c 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/core/dev.c 2011-11-04 11:12:52.119723915 +0200 +@@ -98,6 +98,9 @@ + #include <net/net_namespace.h> + #include <net/sock.h> + #include <linux/rtnetlink.h> ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++#include <linux/imq.h> ++#endif + #include <linux/proc_fs.h> + #include <linux/seq_file.h> + #include <linux/stat.h> +@@ -2185,7 +2188,12 @@ + if (dev->priv_flags & IFF_XMIT_DST_RELEASE) + skb_dst_drop(skb); + ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ if (!list_empty(&ptype_all) && ++ !(skb->imq_flags & IMQ_F_ENQUEUE)) ++#else + if (!list_empty(&ptype_all)) ++#endif + dev_queue_xmit_nit(skb, dev); + + skb_orphan_try(skb); +diff -uNr linux-3.2/net/core/skbuff.c linux-3.2-imq/net/core/skbuff.c +--- linux-3.2/net/core/skbuff.c 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/core/skbuff.c 2011-11-04 11:12:52.123057315 +0200 +@@ -73,6 +73,9 @@ + + static struct kmem_cache *skbuff_head_cache __read_mostly; + static struct kmem_cache *skbuff_fclone_cache __read_mostly; ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++static struct kmem_cache *skbuff_cb_store_cache __read_mostly; ++#endif + + static void sock_pipe_buf_release(struct pipe_inode_info *pipe, + struct pipe_buffer *buf) +@@ -92,6 +95,82 @@ + return 1; + } + ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++/* Control buffer save/restore for IMQ devices */ ++struct skb_cb_table { ++ char cb[48] __aligned(8); ++ void *cb_next; ++ atomic_t refcnt; ++}; ++ ++static DEFINE_SPINLOCK(skb_cb_store_lock); ++ ++int skb_save_cb(struct sk_buff *skb) ++{ ++ struct skb_cb_table *next; ++ ++ next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC); ++ if (!next) ++ return -ENOMEM; ++ ++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb)); ++ ++ memcpy(next->cb, skb->cb, sizeof(skb->cb)); ++ next->cb_next = skb->cb_next; ++ ++ atomic_set(&next->refcnt, 1); ++ ++ skb->cb_next = next; ++ return 0; ++} ++EXPORT_SYMBOL(skb_save_cb); ++ ++int skb_restore_cb(struct sk_buff *skb) ++{ ++ struct skb_cb_table *next; ++ ++ if (!skb->cb_next) ++ return 0; ++ ++ next = skb->cb_next; ++ ++ BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb)); ++ ++ memcpy(skb->cb, next->cb, sizeof(skb->cb)); ++ skb->cb_next = next->cb_next; ++ ++ spin_lock(&skb_cb_store_lock); ++ ++ if (atomic_dec_and_test(&next->refcnt)) ++ kmem_cache_free(skbuff_cb_store_cache, next); ++ ++ spin_unlock(&skb_cb_store_lock); ++ ++ return 0; ++} ++EXPORT_SYMBOL(skb_restore_cb); ++ ++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old) ++{ ++ struct skb_cb_table *next; ++ struct sk_buff *old; ++ ++ if (!__old->cb_next) { ++ new->cb_next = NULL; ++ return; ++ } ++ ++ spin_lock(&skb_cb_store_lock); ++ ++ old = (struct sk_buff *)__old; ++ ++ next = old->cb_next; ++ atomic_inc(&next->refcnt); ++ new->cb_next = next; ++ ++ spin_unlock(&skb_cb_store_lock); ++} ++#endif + + /* Pipe buffer operations for a socket. */ + static const struct pipe_buf_operations sock_pipe_buf_ops = { +@@ -403,6 +482,26 @@ + WARN_ON(in_irq()); + skb->destructor(skb); + } ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ /* This should not happen. When it does, avoid memleak by restoring ++ the chain of cb-backups. */ ++ while (skb->cb_next != NULL) { ++ if (net_ratelimit()) ++ printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: " ++ "%08x\n", (unsigned int)skb->cb_next); ++ ++ skb_restore_cb(skb); ++ } ++ /* This should not happen either, nf_queue_entry is nullified in ++ * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are ++ * leaking entry pointers, maybe memory. We don't know if this is ++ * pointer to already freed memory, or should this be freed. ++ * If this happens we need to add refcounting, etc for nf_queue_entry. ++ */ ++ if (skb->nf_queue_entry && net_ratelimit()) ++ printk(KERN_WARNING ++ "IMQ: kfree_skb: skb->nf_queue_entry != NULL"); ++#endif + #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) + nf_conntrack_put(skb->nfct); + #endif +@@ -547,6 +646,9 @@ + new->sp = secpath_get(old->sp); + #endif + memcpy(new->cb, old->cb, sizeof(old->cb)); ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ skb_copy_stored_cb(new, old); ++#endif + new->csum = old->csum; + new->local_df = old->local_df; + new->pkt_type = old->pkt_type; +@@ -2907,6 +3009,13 @@ + 0, + SLAB_HWCACHE_ALIGN|SLAB_PANIC, + NULL); ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache", ++ sizeof(struct skb_cb_table), ++ 0, ++ SLAB_HWCACHE_ALIGN|SLAB_PANIC, ++ NULL); ++#endif + } + + /** +diff -uNr linux-3.2/net/ipv6/ip6_output.c linux-3.2-imq/net/ipv6/ip6_output.c +--- linux-3.2/net/ipv6/ip6_output.c 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/ipv6/ip6_output.c 2011-11-04 11:12:52.123057315 +0200 +@@ -102,9 +102,6 @@ + struct net_device *dev = dst->dev; + struct neighbour *neigh; + +- skb->protocol = htons(ETH_P_IPV6); +- skb->dev = dev; +- + if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) { + struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb)); + +@@ -170,6 +167,11 @@ + return 0; + } + ++ /* IMQ-patch: moved setting skb->dev and skb->protocol from ++ * ip6_finish_output2 to fix crashing at netif_skb_features(). */ ++ skb->protocol = htons(ETH_P_IPV6); ++ skb->dev = dev; ++ + return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL, dev, + ip6_finish_output, + !(IP6CB(skb)->flags & IP6SKB_REROUTED)); +diff -uNr linux-3.2/net/netfilter/core.c linux-3.2-imq/net/netfilter/core.c +--- linux-3.2/net/netfilter/core.c 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/netfilter/core.c 2011-11-04 11:12:52.123057315 +0200 +@@ -179,9 +179,11 @@ + ret = NF_DROP_GETERR(verdict); + if (ret == 0) + ret = -EPERM; +- } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) { ++ } else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE || ++ (verdict & NF_VERDICT_MASK) == NF_IMQ_QUEUE) { + int err = nf_queue(skb, elem, pf, hook, indev, outdev, okfn, +- verdict >> NF_VERDICT_QBITS); ++ verdict >> NF_VERDICT_QBITS, ++ verdict & NF_VERDICT_MASK); + if (err < 0) { + if (err == -ECANCELED) + goto next_hook; +diff -uNr linux-3.2/net/netfilter/Kconfig linux-3.2-imq/net/netfilter/Kconfig +--- linux-3.2/net/netfilter/Kconfig 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/netfilter/Kconfig 2011-11-04 11:12:52.123057315 +0200 +@@ -506,6 +506,18 @@ + For more information on the LEDs available on your system, see + Documentation/leds/leds-class.txt + ++config NETFILTER_XT_TARGET_IMQ ++ tristate '"IMQ" target support' ++ depends on NETFILTER_XTABLES ++ depends on IP_NF_MANGLE || IP6_NF_MANGLE ++ select IMQ ++ default m if NETFILTER_ADVANCED=n ++ help ++ This option adds a `IMQ' target which is used to specify if and ++ to which imq device packets should get enqueued/dequeued. ++ ++ To compile it as a module, choose M here. If unsure, say N. ++ + config NETFILTER_XT_TARGET_MARK + tristate '"MARK" target support' + depends on NETFILTER_ADVANCED +diff -uNr linux-3.2/net/netfilter/Makefile linux-3.2-imq/net/netfilter/Makefile +--- linux-3.2/net/netfilter/Makefile 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/netfilter/Makefile 2011-11-04 11:12:52.123057315 +0200 +@@ -56,6 +56,7 @@ + obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o + obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o + obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o ++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o + obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o + obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o + obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o +diff -uNr linux-3.2/net/netfilter/nf_internals.h linux-3.2-imq/net/netfilter/nf_internals.h +--- linux-3.2/net/netfilter/nf_internals.h 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/netfilter/nf_internals.h 2011-11-04 11:12:52.123057315 +0200 +@@ -29,7 +29,7 @@ + struct net_device *indev, + struct net_device *outdev, + int (*okfn)(struct sk_buff *), +- unsigned int queuenum); ++ unsigned int queuenum, unsigned int queuetype); + extern int __init netfilter_queue_init(void); + + /* nf_log.c */ +diff -uNr linux-3.2/net/netfilter/nf_queue.c linux-3.2-imq/net/netfilter/nf_queue.c +--- linux-3.2/net/netfilter/nf_queue.c 2011-10-24 10:10:05.000000000 +0300 ++++ linux-3.2-imq/net/netfilter/nf_queue.c 2011-11-04 11:12:52.123057315 +0200 +@@ -22,6 +22,26 @@ + + static DEFINE_MUTEX(queue_handler_mutex); + ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++static const struct nf_queue_handler *queue_imq_handler; ++ ++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh) ++{ ++ mutex_lock(&queue_handler_mutex); ++ rcu_assign_pointer(queue_imq_handler, qh); ++ mutex_unlock(&queue_handler_mutex); ++} ++EXPORT_SYMBOL_GPL(nf_register_queue_imq_handler); ++ ++void nf_unregister_queue_imq_handler(void) ++{ ++ mutex_lock(&queue_handler_mutex); ++ rcu_assign_pointer(queue_imq_handler, NULL); ++ mutex_unlock(&queue_handler_mutex); ++} ++EXPORT_SYMBOL_GPL(nf_unregister_queue_imq_handler); ++#endif ++ + /* return EBUSY when somebody else is registered, return EEXIST if the + * same handler is registered, return 0 in case of success. */ + int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh) +@@ -92,7 +112,7 @@ + } + EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers); + +-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry) ++void nf_queue_entry_release_refs(struct nf_queue_entry *entry) + { + /* Release those devices we held, or Alexey will kill me. */ + if (entry->indev) +@@ -112,6 +132,7 @@ + /* Drop reference to owner of hook which queued us. */ + module_put(entry->elem->owner); + } ++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs); + + /* + * Any packet that leaves via this function must come back +@@ -123,7 +144,8 @@ + struct net_device *indev, + struct net_device *outdev, + int (*okfn)(struct sk_buff *), +- unsigned int queuenum) ++ unsigned int queuenum, ++ unsigned int queuetype) + { + int status = -ENOENT; + struct nf_queue_entry *entry = NULL; +@@ -137,7 +159,17 @@ + /* QUEUE == DROP if no one is waiting, to be safe. */ + rcu_read_lock(); + +- qh = rcu_dereference(queue_handler[pf]); ++ if (queuetype == NF_IMQ_QUEUE) { ++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE) ++ qh = rcu_dereference(queue_imq_handler); ++#else ++ BUG(); ++ goto err_unlock; ++#endif ++ } else { ++ qh = rcu_dereference(queue_handler[pf]); ++ } ++ + if (!qh) { + status = -ESRCH; + goto err_unlock; +@@ -209,7 +241,8 @@ + struct net_device *indev, + struct net_device *outdev, + int (*okfn)(struct sk_buff *), +- unsigned int queuenum) ++ unsigned int queuenum, ++ unsigned int queuetype) + { + struct sk_buff *segs; + int err; +@@ -217,7 +250,7 @@ + + if (!skb_is_gso(skb)) + return __nf_queue(skb, elem, pf, hook, indev, outdev, okfn, +- queuenum); ++ queuenum, queuetype); + + switch (pf) { + case NFPROTO_IPV4: +@@ -244,7 +277,7 @@ + segs->next = NULL; + if (err == 0) + err = __nf_queue(segs, elem, pf, hook, indev, +- outdev, okfn, queuenum); ++ outdev, okfn, queuenum, queuetype); + if (err == 0) + queued++; + else +@@ -299,9 +332,11 @@ + local_bh_enable(); + break; + case NF_QUEUE: ++ case NF_IMQ_QUEUE: + err = __nf_queue(skb, elem, entry->pf, entry->hook, + entry->indev, entry->outdev, entry->okfn, +- verdict >> NF_VERDICT_QBITS); ++ verdict >> NF_VERDICT_QBITS, ++ verdict & NF_VERDICT_MASK); + if (err < 0) { + if (err == -ECANCELED) + goto next_hook; +diff -uNr linux-3.2/net/netfilter/xt_IMQ.c linux-3.2-imq/net/netfilter/xt_IMQ.c +--- linux-3.2/net/netfilter/xt_IMQ.c 1970-01-01 02:00:00.000000000 +0200 ++++ linux-3.2-imq/net/netfilter/xt_IMQ.c 2011-11-04 11:12:52.123057315 +0200 +@@ -0,0 +1,74 @@ ++/* ++ * This target marks packets to be enqueued to an imq device ++ */ ++#include <linux/module.h> ++#include <linux/skbuff.h> ++#include <linux/netfilter/x_tables.h> ++#include <linux/netfilter/xt_IMQ.h> ++#include <linux/imq.h> ++ ++static unsigned int imq_target(struct sk_buff *pskb, ++ const struct xt_action_param *par) ++{ ++ const struct xt_imq_info *mr = par->targinfo; ++ ++ pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE; ++ ++ return XT_CONTINUE; ++} ++ ++static int imq_checkentry(const struct xt_tgchk_param *par) ++{ ++ struct xt_imq_info *mr = par->targinfo; ++ ++ if (mr->todev > IMQ_MAX_DEVS - 1) { ++ printk(KERN_WARNING ++ "IMQ: invalid device specified, highest is %u\n", ++ IMQ_MAX_DEVS - 1); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static struct xt_target xt_imq_reg[] __read_mostly = { ++ { ++ .name = "IMQ", ++ .family = AF_INET, ++ .checkentry = imq_checkentry, ++ .target = imq_target, ++ .targetsize = sizeof(struct xt_imq_info), ++ .table = "mangle", ++ .me = THIS_MODULE ++ }, ++ { ++ .name = "IMQ", ++ .family = AF_INET6, ++ .checkentry = imq_checkentry, ++ .target = imq_target, ++ .targetsize = sizeof(struct xt_imq_info), ++ .table = "mangle", ++ .me = THIS_MODULE ++ }, ++}; ++ ++static int __init imq_init(void) ++{ ++ return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg)); ++} ++ ++static void __exit imq_fini(void) ++{ ++ xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg)); ++} ++ ++module_init(imq_init); ++module_exit(imq_fini); ++ ++MODULE_AUTHOR("http://www.linuximq.net"); ++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. " ++ "See http://www.linuximq.net/ for more information."); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("ipt_IMQ"); ++MODULE_ALIAS("ip6t_IMQ"); ++ diff --git a/src/patches/linux-3.2-panda-reboot.patch b/src/patches/linux-3.2-panda-reboot.patch new file mode 100644 index 0000000..8e37837 --- /dev/null +++ b/src/patches/linux-3.2-panda-reboot.patch @@ -0,0 +1,29 @@ +With commit 3d3f78d752bf, reboot seems to broken on ARM +machines. CPU dies while doing flush_pmd_entry() as part of +setup_mm_for_reboot() + +I know this is not the fix but intention is to report the +issue and also provide temporary fix till it get fixed correctly + +Signed-off-by: Santosh Shilimkar santosh.shilimkar@xxxxxx +Reported-by: Anand Gadiyar gadiyar@xxxxxx +--- +Tested with OMAP4 device. + + arch/arm/kernel/process.c | 1 - + 1 files changed, 0 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c +index e76fcaa..ac370b2 100644 +--- a/arch/arm/kernel/process.c ++++ b/arch/arm/kernel/process.c +@@ -247,7 +247,6 @@ void machine_power_off(void) + + void machine_restart(char *cmd) + { +- machine_shutdown(); + arm_pm_restart(reboot_mode, cmd); + } + +-- +1.6.0.4
hooks/post-receive -- IPFire 2.x development tree
-
git＠ipfire.org