This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree".

The branch, next has been updated via 6c6cfa1e04de2539411add9266b22cfd46cf0d50 (commit) via 52ac8f6eb9fdf8cb6874bd9338e370f2c8cc84eb (commit) via 4ae88fc97152903fb9c9a1be310f4877a64d7015 (commit) via 77ebcf4e8ba8f949deb29c3ae716c524ec0dc8d9 (commit) via 2e6c5015ec964a551ceb214052744effe1facb61 (commit) via a4908eaf7026bbedc9a3641f6309aa367a8e5338 (commit) from 08fc3fda703d50eb50daae77a0821c4870453965 (commit)

Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.

- Log ----------------------------------------------------------------- commit 6c6cfa1e04de2539411add9266b22cfd46cf0d50 Merge: 08fc3fd 52ac8f6 Author: Michael Tremer michael.tremer@ipfire.org Date: Mon May 27 20:01:32 2013 +0200

Merge branch 'lcdproc' into next

commit 52ac8f6eb9fdf8cb6874bd9338e370f2c8cc84eb Author: Michael Tremer michael.tremer@ipfire.org Date: Mon May 27 20:00:31 2013 +0200

lcdproc: Add default configuration files.

commit 4ae88fc97152903fb9c9a1be310f4877a64d7015 Author: Michael Tremer michael.tremer@ipfire.org Date: Mon May 27 19:57:26 2013 +0200

lcdproc: Add initscript.

commit 77ebcf4e8ba8f949deb29c3ae716c524ec0dc8d9 Author: Michael Tremer michael.tremer@ipfire.org Date: Mon May 27 19:46:30 2013 +0200

lcdproc: Update to 0.5.6.

commit 2e6c5015ec964a551ceb214052744effe1facb61 Author: Michael Tremer michael.tremer@ipfire.org Date: Tue Jul 3 16:21:53 2012 +0200

Add lcdproc to make.sh.

commit a4908eaf7026bbedc9a3641f6309aa367a8e5338 Author: Julian McConnell julian.mcconnell@ipfire.org Date: Thu Jun 28 19:26:10 2012 +0200

lcdproc: New addon.

-----------------------------------------------------------------------

Summary of changes: .../hosts/.placeholder => backup/includes/lcdproc} | 0 config/lcdproc/LCDd.conf | 1189 ++++++++++++++++++++ config/lcdproc/lcdproc.conf | 129 +++ config/rootfiles/packages/lcdproc | 65 ++ lfs/{parted => lcdproc} | 34 +- make.sh | 1 + src/initscripts/init.d/lcdproc | 71 ++ src/patches/lcdproc-0.5.6-menuitem.patch | 11 + 8 files changed, 1492 insertions(+), 8 deletions(-) copy config/{nagiosql/etc/nagiosql/backup/hosts/.placeholder => backup/includes/lcdproc} (100%) create mode 100644 config/lcdproc/LCDd.conf create mode 100644 config/lcdproc/lcdproc.conf create mode 100644 config/rootfiles/packages/lcdproc copy lfs/{parted => lcdproc} (77%) create mode 100644 src/initscripts/init.d/lcdproc create mode 100644 src/patches/lcdproc-0.5.6-menuitem.patch

Difference in files: diff --git a/config/backup/includes/lcdproc b/config/backup/includes/lcdproc new file mode 100644 index 0000000..e69de29 diff --git a/config/lcdproc/LCDd.conf b/config/lcdproc/LCDd.conf new file mode 100644 index 0000000..8c418f4 --- /dev/null +++ b/config/lcdproc/LCDd.conf @@ -0,0 +1,1189 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving a File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, +# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, imonlcd, +# IOWarrior, irman, joy, lb216, lcdm001, lcterm, lirc, lis, MD8800, +# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, picolcd, +# pyramid, sed1330, sed1520, serialPOS, serialVFD, shuttleVFD, sli, +# stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=CFontz + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? [default: no; legal: yes, no] +#ReportToSyslog=yes + +# User to run as. LCDd will drop its root privileges, if any, +# and run as this user instead. +User=root + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Hello message: each entry represents a display line; default: builtin +#Hello=" Welcome to" +#Hello=" LCDproc!" + +# GoodBye message: each entry represents a display line; default: builtin +#GoodBye="Thanks for using" +#GoodBye=" LCDproc!" + +# Sets the default time in seconds to displays a screen. +WaitTime=10 + +# If set to no, LCDd will start with screen rotation disabled. This has the +# same effect as if the ToggleRotateKey had been pressed. Rotation will start +# if the ToggleRotateKey is pressed. Note that this setting does not turn off +# priority sorting of screens. [default: on; legal: on, off] +#AutoRotate=no + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. The special value 'blank' is similar to no, but only a blank screen +# is displayed. [default: on; legal: on, off, blank] +#ServerScreen=no + +# Set master backlight setting. If set to 'open' a client may control the +# backlight for its own screens (only). [default: open; legal: off, open, on] +#Backlight=open + +# Set master heartbeat setting. If set to 'open' a client may control the +# heartbeat for its own screens (only). [default: open; legal: off, open, on] +#Heartbeat=open + +# set title scrolling speed [default: 10; legal: 0-10] +#TitleSpeed=10 + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. The ToggleRotateKey stops rotation of screens, while +# the PrevScreenKey and NextScreenKey go back / forward one screen (even if +# rotation is disabled. +# Assign the key string returned by the driver to the ...Key setting. These +# are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# Up to six keys are supported. The MenuKey (to enter and exit the menu), the +# EnterKey (to select values) and at least one movement keys are required. +# These are the default key assignments: +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +#LeftKey=Left +#RightKey=Right + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=560 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=800 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=800 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, +# 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=yes +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] +# Note: Use of this driver is deprecated, please use CFontzPacket driver +# with Model=633 instead. + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 533, 631, 633, 635] +Model=633 + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + +# Reinitialize the LCD's BIOS on driver start. [default: no; legal: yes, no] +Reboot=yes + +# Enable the USB flag if the device is connected to an USB port. For +# serial ports leave it disabled. [default: no; legal: yes, no] +#USB=yes + +# Very old 633 firmware versions do not support partial screen updates using +# 'Send Data to LCD' command (31). For those devices it may be necessary to +# enable this flag. [default: no; legal: yes, no] +#OldFirmware=yes + +# Override the LCD size known for the selected model. Usually setting this +# value should not be necessary. +#Size=20x4 + +# Override the default communication speed known for the selected model. +# Default value depends on model [legal: 19200, 115200] +#Speed=115200 + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal: yes, no] +UseACS=no + +# draw Border [default: yes; legal: yes, no] +DrawBorder=yes + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 12832, 1602] +Model=12232 + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size. Default depends on model: +# 12232: 20x4 +# 12832: 21x4 +# 1602: 16x2 +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits one to test keypad assignment +# Default value is no +#keypad_test_mode=yes + + + +## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## +[ea65] + +# Device is fixed /dev/ttyS1 +# Width and Height are fixed 9x1 + +# As the VFD is self luminescent we don't have a backlight +# But we can use the backlight functions to control the front LEDs +# Brightness 0 to 299 -> LEDs off +# Brightness 300 to 699 -> LEDs half bright +# Brightness 700 to 1000 -> LEDs full bright +Brightness=500 +# OffBrightness is the the value used for the 'backlight off' state +OffBrightness=0 + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + + + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=t6963c + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in +# libglcdprocdriver and its dependants) +UseFT2=no + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolution +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +#FontFile=/usr/share/fonts/corefonts/courbd.ttf + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minimum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border within the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual value are: 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface [default: /dev/lcd] +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# Set the initial contrast (bwctusb and lcd2usb) [default: 500; legal: 0 - 1000] +Contrast=0 + +# Set brightness of the backlight (lcd2usb only) [default: 0; legal: 0 - 1000] +#Brightness=1000 +#OffBrightness=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable (yes) or it controls an +# underline effect (no). [default: yes; legal: yes, no] +#Lastline=yes + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +#ExtendedMode=yes + +# In extended mode, on some controllers like the ST7036 (in 3 line mode) +# the next line in DDRAM won't start 0x20 higher. [default: 0x20] +#LineAddress=0x10 + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073, +# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 ] +# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5 and upd16314 are possible if +# compiled with additional charmaps) +CharMap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# Some displays (e.g. vdr-wakeup) need a message from the driver to that it +# is still alive. When set to a value bigger then null the character in the +# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0. +#KeepAliveDisplay=0 + +# If you experience occasional garbage on your display you can use this +# option as workaround. If set to a value bigger than null it forces a +# full screen refresh <RefreshDiplay> seconds. Default: 0. +#RefreshDisplay=5 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number. Must be exactly as listed by usbview +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +#ExtendedMode=yes + +# Specifies if the last line is pixel addressable (yes) or it controls an +# underline effect (no). [default: yes; legal: yes, no] +#Lastline=yes + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + +# Character map to to map ISO-8859-1 to the displays character set. +# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r, +# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r, +# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional +# charmaps) +CharMap=hd44780_euro + +## Soundgraph iMON LCD ## +[imonlcd] +# Specify which iMon protocol should be used +# [legal: 0, 1; default: 0] +# Choose 0 for 15c2:ffdc device, +# Choose 1 for 15c2:0038 device +Protocol=0 + +# Set the exit behavior [legal: 0-2; default: 1] +# 0 means leave shutdown message, +# 1 means show the big clock, +# 2 means blank device +#OnExit=2 + +# Select the output device to use [default: /dev/lcd0] +Device=/dev/lcd0 + +# Select the displays contrast [default: 200; legal: 0-1000] +Contrast=200 + +# Specify the size of the display in pixels [default: 96x16] +#Size=96x16 + +# Set the backlight state [default: on; legal: on, off] +#Backlight=on + +# Set the disc mode [legal: 0,1; default: 0] +# 0 => spin the "slim" disc - two disc segments, +# 1 => their complement spinning; +#DiscMode=0 + + + +## IrMan driver ## +[IrMan] +# in case of trouble with IrMan, try the Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## IRtrans driver ## +[irtrans] + +# Does the device have a backlight? [default: no; legal: yes, no] +#Backlight=no + +# IRTrans device to connect to [default: localhost] +#Hostname=localhost + +# display dimensions +Size=16x2 + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at server/drivers/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +## LIS MCE 2005 driver ## +[lis] + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100% +#Brightness=1000 + +# Columns by lines [default: 20x2] +#Size=20x2 + +# USB Vendor ID [default: 0x0403] +# Change only if testing a compatible device. +#VendorID=0x0403 + +# USB Product ID [default: 0x6001] +# Change only if testing a compatible device. +#ProductID=0x6001 + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## Futuba MDM166A Display +[mdm166a] +# Show self-running clock after LCDd shutdown +# Possible values: [default: no; legal: no, small, big] +Clock=big +# Dim display, no dimming gives full brightness [default: no, legal: yes, no] +Dimming=no +# Dim display in case LCDd is inactive [default: no, legal: yes, no] +OffDimming=yes + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=480 + +# Some old displays do not have an adjustable backlight but only can +# switch the backlight on/off. If you experience randomly appearing block +# characters, try setting this to false. [default: yes; legal: yes, no] +hasAdjustableBacklight=no + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# The following table translates from MtxOrb key letters to logical key names. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## mx5000 driver for LCD display on the Logitech MX5000 keyboard ## +[mx5000] + +# Select the output device to use [default: /dev/hiddev0] +Device = /dev/hiddev0 +# Time to wait in ms after the refresh screen has been sent [default: 1000] +WaitAfterRefresh = 1000 + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 +# [default: /dev/lcd] +Device=/dev/ttyS0 +# Specifies the size of the LCD. +Size=20x4 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 +# Set serial data parity [default: 0; legal: 0-2 ] +# Meaning: 0(=none), 1(=odd), 2(=even) +Parity=0 +# re-initialize the VFD [default: no; legal: yes, no] +Reboot=no + + + +## Mini-box.com picoLCD (usblcd) driver ## +[picolcd] + +# KeyTimeout is the time in ms that LCDd spends waiting for a key press before +# cycling through other duties. Higher values make LCDd use less CPU time and +# make key presses more detectable. Lower values make LCDd more responsive +# but a little prone to missing key presses. 500 (.5 second) is the default +# and a balanced value. [default: 500; legal: 0 - 1000] +KeyTimeout=500 + +# Sets the initial state of the backlight upon start-up. +# [default: on; legal: on, off] +#Backlight=on + +# Set the initial brightness [default: 1000; legal: 0 - 1000]. Works only +# with the 20x4 device +Brightness=1000 + +# Set the brightness while the backlight is 'off' [default: 0; legal: 0 - 1000]. +# Works only with the 20x4 device. +#OffBrightness=0 + +# Set the initial contrast [default: 1000; legal: 0 - 1000] +Contrast=1000 + +# Light the keys? [default: on; legal: on, off] +Keylights=on + +# If Keylights is on, the you can unlight specific keys below: +# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. +# There is no LED for the +/- keys. This is a handy way to indicate to users +# which keys are disabled. [default: on; legal: on, off] +Key0Light=on +Key1Light=on +Key2Light=on +Key3Light=on +Key4Light=on +Key5Light=on + +# Host name or IP address of the LIRC instance that is to receive IR codes +# If not set, or set to an empty value, IR support is disabled. +#LircHost=127.0.0.1 + +# UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535] +LircPort=8765 + +# Threshold in jiffies of synthesized gap that triggers flushing the IR data +# to lirc [default: 100 ; max: 32767 ] +# 100 means 6.1ms. legal: 16 - 32767; Use 0 to disable. +LircFlushThreshold=100 + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) +# Note: Currently only tested with G321D & SP14Q002. +Type=G321D + +# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] +CellSize=6x10 + +# Select what type of connection [legal: classic, bitshaker; default: classic] +ConnectionType=classic + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Select the interface type (wiring) for the display. Supported values are +# 68 for 68-style connection (RESET level high) and 80 for 80-style connection +# (RESET level low). [legal: 68, 80; default: 80] +InterfaceType=68 + +# On fast machines it may be necessary to slow down transfer to the display. +# If this value is set to zero, delay is disabled. Any value greater than +# zero slows down each write by one microsecond. [legal: 0-1000; default: 1] +DelayMult=0 + + +## serial POS display driver ## +[serialPOS] + +# Device to use in serial mode [default: /dev/lcd] +Device=/dev/lcd + +# Specifies the size of the display in characters. [default: 16x2] +Size=16x2 + +# Set the communication protocol to use with the POS display. +# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] +Type=AEDEX + +# communication baud rate with the display [default: 9600; legal: 1200, 2400, +# 19200, 115200] +Speed=9600 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# 4 IEE S03601-95B +# 5 IEE S03601-96-080 (*) +# 6 Futaba NA202SD08FA (allmost IEE compatible) +# 7 Samsung 20S207DA4 and 20S207DA6 +# 8 Nixdorf BA6x / VT100 +# (* most should work, not tested yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no] +# I.e. serial by default +use_parallel=no + +# Number of Custom-Characters. default is display type dependent +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallel mode only. Usual values are +# 0x278, 0x378 and 0x3BC. +Port=0x378 + +# Set parallel port timing delay (us). Used in parallel mode only. +# [default: 2; legal: 0 - 255] +#PortWait=2 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## shuttleVFD driver ## +[shuttleVFD] +# No options + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + +[SureElec] + +# Port the device is connected to (by default first USB serial port) +Device=/dev/ttyUSB0 + +# Edition level of the device (can be 1, 2 or 3) [default: 2] +#Edition=1 + +# set display size +# Note: The size can be obtained directly from device for edition 2 & 3. +#Size=16x2 + +# Set the initial contrast [default: 480; legal: 0 - 1000] +#Contrast=200 + +# Set the initial brightness [default: 480; legal: 1 - 1000] +#Brightness=480 + +# Set the initial off-brightness [default: 100; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +#OffBrightness=100 + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256 ] +# legal values are supported svgalib modes +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size in pixels [default: 128x64] +Size=240x128 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Use LPT port in bi-directional mode. This should work on most LPT port and +# is required for proper timing! [default: yes; legal: yes, no] +bidirectional=yes + +# Insert additional delays into reads / writes. [default: no; legal: yes, no] +#delayBus=no + +# Clear graphic memory on start-up. [default: no; legal: yes, no] +ClearGraphic=yes + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, +# 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# Offset in pixels from the top-left corner of the monitor [default: 0x0] +Offset=200x200 + +# X font to use, in XLFD format, as given by "xfontsel" +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/config/lcdproc/lcdproc.conf b/config/lcdproc/lcdproc.conf new file mode 100644 index 0000000..807238c --- /dev/null +++ b/config/lcdproc/lcdproc.conf @@ -0,0 +1,129 @@ +# LCDproc client configuration file + +## general options ## +[lcdproc] +# address of the LCDd server to connect to +Server=localhost + +# Port of the server to connect to +Port=13666 + +# set reporting level +ReportLevel=2 + +# report to to syslog ? +ReportToSyslog=false + +# run in foreground [default: false; legal: true, false] +#Foreground=true + +# PidFile location when running as daemon [default: /var/run/lcdproc.pid] +#PidFile=/var/run/lcdproc.pid + +# slow down initial announcement of modes (in 1/100s) +#delay=2 + +# display name for the main menu [default: LCDproc HOST] +#DisplayName=lcdproc + +## screen specific configuration options ## + +[CPU] +# Show screen +Active=True +OnTime=1 +OffTime=2 +ShowInvisible=false + +[Iface] +# Show screen +Active=True + +# Show stats for Interface0 +Interface0=green0 +# Interface alias name to display [default: <interface name>] +Alias0=LAN + +# Show stats for Interface1 +Interface1=red0 +Alias1=WAN + +# Show stats for Interface2 +Interface2=blue0 +Alias2=WIFI + +# for more than 3 interfaces change MAX_INTERFACES in iface.h and rebuild + +# Units to display [default: byte; legal: byte, bit, packet] +unit=bit + +# add screen with transferred traffic +#transfer=TRUE + +[Memory] +# Show screen +Active=True + +[Load] +# Show screen +Active=True +# Min Load Avg at which the backlight will be turned off [default: 0.05] +LowLoad=0.00 +# Max Load Avg at which the backlight will start blinking [default: 1.3] +HighLoad=2.5 + +[TimeDate] +# Show screen +Active=True +# time format [default: %H:%M:%S; legal: see strftime(3)] +TimeFormat="%H:%M:%S" +# date format [default: %x; legal: see strftime(3)] +DateFormat="%x" + +[About] +# Show screen +Active=false + +[SMP-CPU] +# Show screen +Active=false + +[OldTime] +# Show screen +Active=false +# time format [default: %H:%M:%S; legal: see strftime(3)] +TimeFormat="%H:%M:%S" +# date format [default: %x; legal: see strftime(3)] +DateFormat="%x" + +[BigClock] +# Show screen +Active=false + +[Uptime] +# Show screen +Active=false + +[Battery] +# Show screen +Active=false + +[CPUGraph] +# Show screen +Active=false + +[ProcSize] +# Show screen +Active=false + +[Disk] +# Show screen +Active=false + +[MiniClock] +# Show screen +Active=True +# time format [default: %H:%M; legal: see strftime(3)] +TimeFormat="%H:%M" + +# EOF diff --git a/config/rootfiles/packages/lcdproc b/config/rootfiles/packages/lcdproc new file mode 100644 index 0000000..8bef5a3 --- /dev/null +++ b/config/rootfiles/packages/lcdproc @@ -0,0 +1,65 @@ +etc/rc.d/init.d/lcdproc +etc/rc.d/rc0.d/K40lcdproc +etc/rc.d/rc3.d/S60lcdproc +etc/rc.d/rc6.d/K40lcdproc +#etc/lcdproc +etc/lcdproc/LCDd.conf +etc/lcdproc/lcdexec.conf +etc/lcdproc/lcdproc.conf +etc/lcdproc/lcdvc.conf +usr/bin/fortune.pl +usr/bin/iosock.pl +usr/bin/lcdexec +usr/bin/lcdident.pl +usr/bin/lcdmetar.pl +usr/bin/lcdproc +usr/bin/lcdvc +usr/bin/tail.pl +usr/bin/x11amp.pl +usr/lib/lcdproc +#usr/lib/lcdproc/CFontz.so +#usr/lib/lcdproc/CFontzPacket.so +#usr/lib/lcdproc/CwLnx.so +#usr/lib/lcdproc/EyeboxOne.so +#usr/lib/lcdproc/IOWarrior.so +#usr/lib/lcdproc/MD8800.so +#usr/lib/lcdproc/MtxOrb.so +#usr/lib/lcdproc/NoritakeVFD.so +#usr/lib/lcdproc/SureElec.so +#usr/lib/lcdproc/bayrad.so +#usr/lib/lcdproc/curses.so +#usr/lib/lcdproc/ea65.so +#usr/lib/lcdproc/glcd.so +#usr/lib/lcdproc/glk.so +#usr/lib/lcdproc/hd44780.so +#usr/lib/lcdproc/icp_a106.so +#usr/lib/lcdproc/imon.so +#usr/lib/lcdproc/imonlcd.so +#usr/lib/lcdproc/irtrans.so +#usr/lib/lcdproc/joy.so +#usr/lib/lcdproc/lb216.so +#usr/lib/lcdproc/lcdm001.so +#usr/lib/lcdproc/lcterm.so +#usr/lib/lcdproc/ms6931.so +#usr/lib/lcdproc/mtc_s16209x.so +#usr/lib/lcdproc/picolcd.so +#usr/lib/lcdproc/pyramid.so +#usr/lib/lcdproc/sdeclcd.so +#usr/lib/lcdproc/sed1330.so +#usr/lib/lcdproc/sed1520.so +#usr/lib/lcdproc/serialPOS.so +#usr/lib/lcdproc/serialVFD.so +#usr/lib/lcdproc/shuttleVFD.so +#usr/lib/lcdproc/sli.so +#usr/lib/lcdproc/stv5730.so +#usr/lib/lcdproc/t6963.so +#usr/lib/lcdproc/text.so +#usr/lib/lcdproc/tyan.so +#usr/lib/lcdproc/vlsys_m428.so +usr/sbin/LCDd +#usr/share/man/man1/lcdexec.1 +#usr/share/man/man1/lcdproc.1 +#usr/share/man/man1/lcdvc.1 +#usr/share/man/man5/lcdproc-config.5 +#usr/share/man/man8/LCDd.8 +var/ipfire/backup/addons/includes/lcdproc diff --git a/lfs/lcdproc b/lfs/lcdproc new file mode 100644 index 0000000..9e88622 --- /dev/null +++ b/lfs/lcdproc @@ -0,0 +1,103 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007-2011 IPFire Team info@ipfire.org # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see http://www.gnu.org/licenses/. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.5.6 + +THISAPP = lcdproc-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = lcdproc +PAK_VER = 1 + +DEPS = + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = df4f5c2c7285eaf6979b9c7768b4877f + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist: + $(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && patch -Np0 < $(DIR_SRC)/src/patches/lcdproc-0.5.6-menuitem.patch + cd $(DIR_APP) && \ + ./configure \ + --prefix=/usr \ + --sysconfdir=/etc/lcdproc \ + --enable-libusb \ + --enable-drivers=all \ + --enable-permissive-menu-goto \ + --enable-lcdproc-menus \ + --enable-stat-nfs \ + --enable-stat-smbfs \ + --with-lcdport=13666 \ + --enable-seamless-hbars + cd $(DIR_APP) && make $(MAKETUNING) + cd $(DIR_APP) && make install + -mkdir -pv /etc/lcdproc + cp -vf $(DIR_SRC)/config/lcdproc/{LCDd,lcdproc}.conf /etc/lcdproc + ln -sf ../init.d/lcdproc /etc/rc.d/rc3.d/S60lcdproc + ln -sf ../init.d/lcdproc /etc/rc.d/rc0.d/K40lcdproc + ln -sf ../init.d/lcdproc /etc/rc.d/rc6.d/K40lcdproc + install -v -m 644 $(DIR_SRC)/config/backup/includes/lcdproc \ + /var/ipfire/backup/addons/includes/lcdproc + @rm -rf $(DIR_APP) + @$(POSTBUILD) diff --git a/make.sh b/make.sh index 3d4fe86..d09d24c 100755 --- a/make.sh +++ b/make.sh @@ -767,6 +767,7 @@ buildipfire() { ipfiremake sysbench ipfiremake strace ipfiremake ipfire-netboot + ipfiremake lcdproc echo Build on $HOSTNAME > $BASEDIR/build/var/ipfire/firebuild cat /proc/version >> $BASEDIR/build/var/ipfire/firebuild echo >> $BASEDIR/build/var/ipfire/firebuild diff --git a/src/initscripts/init.d/lcdproc b/src/initscripts/init.d/lcdproc new file mode 100644 index 0000000..88e6142 --- /dev/null +++ b/src/initscripts/init.d/lcdproc @@ -0,0 +1,71 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/lcdproc +# +# Description : +# +# Authors : +# +# Version : 00.00 +# +# Notes : +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +CLIENT="lcdproc" + +CONFIG_FILE="/etc/sysconfig/lcdproc" + +# Read the configuration file if any. +[ -e "${CONFIG_FILE}" ] && . ${CONFIG_FILE} + +case "${1}" in + start) + boot_mesg "Starting LCDd..." + loadproc /usr/sbin/LCDd -c /etc/lcdproc/LCDd.conf 2>/dev/null + + case "${CLIENT}" in + lcdproc) + boot_mesg "Starting lcdproc..." + loadproc /usr/bin/lcdproc -c /etc/lcdproc/lcdproc.conf 2>/dev/null + ;; + vc) + boot_mesg "Starting LCD virtual console..." + loadproc /usr/bin/lcdvc -c /etc/lcdproc/lcdvc.conf 2>/dev/null + ;; + esac + ;; + + stop) + boot_mesg "Stopping LCDd..." + killproc /usr/sbin/LCDd + + boot_mesg "Stopping lcdproc..." + killproc /usr/bin/lcdproc + + boot_mesg "Stopping LCD virtual console..." + killproc /usr/bin/lcdvc + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + statusproc /usr/sbin/LCDd + statusproc /usr/bin/lcdproc + statusproc /usr/bin/lcdvc + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/lcdproc diff --git a/src/patches/lcdproc-0.5.6-menuitem.patch b/src/patches/lcdproc-0.5.6-menuitem.patch new file mode 100644 index 0000000..b9e933d --- /dev/null +++ b/src/patches/lcdproc-0.5.6-menuitem.patch @@ -0,0 +1,11 @@ +--- server/menuitem.c 2012/04/25 19:53:15 1.37 ++++ server/menuitem.c 2013/01/17 21:27:27 1.38 +@@ -33,6 +33,8 @@ + + #define MAX_NUMERIC_LEN 40 + ++extern Menu *main_menu; /* Access to the main menu */ ++ + char *error_strs[] = {"", "Out of range", "Too long", "Too short", "Invalid Address"}; + char *menuitemtypenames[] = {"menu", "action", "checkbox", "ring", "slider", "numeric", "alpha", "ip"}; + char *menueventtypenames[] = {"select", "update", "plus", "minus", "enter", "leave"};

hooks/post-receive -- IPFire 2.x development tree