[git.ipfire.org] IPFire 2.x development tree branch, master, updated. f345b2831cc25643a01117b4536e02d2f53399d0
This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "IPFire 2.x development tree".
The branch, master has been updated via f345b2831cc25643a01117b4536e02d2f53399d0 (commit) via 1f84d624fd00d5d1895c024db939f40faaa5d4a6 (commit) via f7da2c950cc828174ebe80935dcbd1177a6d62fb (commit) from ca666e151216fea6d1b5defcd926cad2b98cc145 (commit)
Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.
- Log ----------------------------------------------------------------- commit f345b2831cc25643a01117b4536e02d2f53399d0 Author: Arne Fitzenreiter arne_f@ipfire.org Date: Fri Feb 20 10:09:34 2015 +0100
cleanup: remove some unused patches.
commit 1f84d624fd00d5d1895c024db939f40faaa5d4a6 Author: Arne Fitzenreiter arne_f@ipfire.org Date: Fri Feb 20 10:07:33 2015 +0100
u-boot: uEnv.txt load initrd on sunxi boot.
This is needed to be able to boot the rootfs also from sata.
commit f7da2c950cc828174ebe80935dcbd1177a6d62fb Author: Arne Fitzenreiter arne_f@ipfire.org Date: Thu Feb 19 15:04:27 2015 +0100
core87: don't overwrite /etc/sysconfig/modules.
-----------------------------------------------------------------------
Summary of changes: config/rootfiles/core/86/exclude | 1 + config/u-boot/uEnv.txt | 7 +- .../linux-3.10-compulab-utilite-support.patch | 96 ------- src/patches/linux-3.14.x-update_banana_dts.patch | 301 --------------------- 4 files changed, 5 insertions(+), 400 deletions(-) delete mode 100644 src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch delete mode 100644 src/patches/linux-3.14.x-update_banana_dts.patch
Difference in files: diff --git a/config/rootfiles/core/86/exclude b/config/rootfiles/core/86/exclude index 37c2aaa..cfb84a5 100644 --- a/config/rootfiles/core/86/exclude +++ b/config/rootfiles/core/86/exclude @@ -11,6 +11,7 @@ etc/ssh/sshd_config etc/ssl/openssl.cnf etc/sudoers etc/sysconfig/firewall.local +etc/sysconfig/modules etc/sysconfig/rc.local etc/udev/rules.d/30-persistent-network.rules srv/web/ipfire/html/proxy.pac diff --git a/config/u-boot/uEnv.txt b/config/u-boot/uEnv.txt index bc3facc..66ab24f 100755 --- a/config/u-boot/uEnv.txt +++ b/config/u-boot/uEnv.txt @@ -1,4 +1,5 @@ -uenvcmd=if test "$board" = "panda" ;then run bootpanda; else run bootbananapi; fi; KVER=xxxKVERxxx -bootpanda=setenv initrd_high 90000000; fatload mmc 0:1 0x82000000 zImage-ipfire-multi; fatload mmc 0:1 ${fdtaddr} dtb-${KVER}-ipfire-multi/${fdtfile}; setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3 ro; bootz 0x82000000 - ${fdtaddr}; -bootbananapi=setenv fdt_high ffffffff; fatload mmc 0:1 0x46000000 zImage-ipfire-multi; fatload mmc 0:1 0x49000000 dtb-${KVER}-ipfire-multi/sun7i-a20-bananapi.dtb; setenv bootargs console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p3 rootwait; bootz 0x46000000 - 0x49000000; +DTBSUNXI=sun7i-a20-bananapi.dtb +uenvcmd=if test "$board" = "panda" ;then run bootpanda; else run bootsunxi; fi; +bootpanda=setenv initrd_high 90000000; fatload mmc 0:1 0x82000000 zImage-ipfire-multi; fatload mmc 0:1 ${fdtaddr} dtb-${KVER}-ipfire-multi/${fdtfile}; setenv bootargs video=800x600 console=tty1 rootwait smsc95xx.macaddr=$usbethaddr root=/dev/mmcblk0p3; bootz 0x82000000 - ${fdtaddr}; +bootsunxi=setenv fdt_high ffffffff; fatload mmc 0:1 0x46000000 zImage-ipfire-multi; fatload mmc 0:1 0x49000000 dtb-${KVER}-ipfire-multi/${DTBSUNXI}; fatload mmc 0:1 0x49100000 uInit-ipfire-multi; setenv bootargs console=ttyS0,115200n8 rootwait root=/dev/mmcblk0p3 rootwait; bootz 0x46000000 0x49100000 0x49000000; diff --git a/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch b/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch deleted file mode 100644 index 3d7f676..0000000 --- a/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch +++ /dev/null @@ -1,96 +0,0 @@ -Add initial support for cm-fx6 module. - -cm-fx6 is a module based on mx6q SoC with the following features: -- Up to 4GB of DDR3 -- 1 LCD/DVI output port -- 1 HDMI output port -- 2 LVDS LCD ports -- Gigabit Ethernet -- Analog Audio -- CAN -- SATA -- NAND -- PCIE - -This patch allows to boot up the module, configures the serial console, -the Ethernet adapter and the heartbeat led. - -cm-fx6 is embedded inside the Utilite computer. - -Signed-off-by: Valentin Raevsky valentin@compulab.co.il -Signed-off-by: Igor Grinberg grinberg@compulab.co.il ---- - -Shawn, can this still be applied for 3.13 ? - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index f0895c5..7521a34 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6dl-sabresd.dtb \ - imx6dl-wandboard.dtb \ - imx6q-arm2.dtb \ -+ imx6q-cm-fx6.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ -diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts -new file mode 100644 -index 0000000..2419751 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts -@@ -0,0 +1,53 @@ -+/* -+ * Copyright 2013 CompuLab Ltd. -+ * -+ * Author: Valentin Raevsky valentin@compulab.co.il -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+#include "imx6q.dtsi" -+ -+/ { -+ model = "CompuLab CM-FX6"; -+ compatible = "compulab,cm-fx6", "fsl,imx6q"; -+ -+ memory { -+ reg = <0x10000000 0x80000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ heartbeat-led { -+ label = "Heartbeat"; -+ gpios = <&gpio2 31 0>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ }; -+}; -+ -+&fec { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet_1>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&gpmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_gpmi_nand_1>; -+ status = "okay"; -+}; -+ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart4_1>; -+ status = "okay"; -+}; diff --git a/src/patches/linux-3.14.x-update_banana_dts.patch b/src/patches/linux-3.14.x-update_banana_dts.patch deleted file mode 100644 index 309416b..0000000 --- a/src/patches/linux-3.14.x-update_banana_dts.patch +++ /dev/null @@ -1,301 +0,0 @@ -diff -Naur linux-3.14.30.org/arch/arm/boot/dts/Makefile linux-3.14.30/arch/arm/boot/dts/Makefile ---- linux-3.14.30.org/arch/arm/boot/dts/Makefile 2015-01-29 19:56:17.000000000 +0100 -+++ linux-3.14.30/arch/arm/boot/dts/Makefile 2015-01-29 20:41:06.598335182 +0100 -@@ -304,6 +304,7 @@ - sun5i-a13-olinuxino-micro.dtb \ - sun6i-a31-colombus.dtb \ - sun7i-a20-bananapi.dtb \ -+ sun7i-a20-bananapro.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-lamobo-r1.dtb \ -diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts ---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2015-01-29 19:56:17.000000000 +0100 -+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2015-01-29 20:33:18.143334959 +0100 -@@ -199,7 +199,7 @@ - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -- startup-delay-us = <50000>; -+ startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 0>; - status = "okay"; -diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts ---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-bananapro.dts 1970-01-01 01:00:00.000000000 +0100 -+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-bananapro.dts 2015-01-29 20:40:45.153335172 +0100 -@@ -0,0 +1,262 @@ -+/* -+ * Copyright 2015 Arne Fitzenreiter -+ * Arne Fitzenreiter arne_f@ipfire.org -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun7i-a20.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "LeMaker Banana Pro"; -+ compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; -+ -+ aliases { -+ spi0 = &spi1; -+ spi1 = &spi2; -+ }; -+ -+ soc@01c00000 { -+ spi1: spi@01c06000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins_a>; -+ status = "okay"; -+ }; -+ -+ spi2: spi@01c17000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_bananapi>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ status = "okay"; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc3_pins_a>; -+ vmmc-supply = <®_vmmc3>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { -+ allwinner,pins = "PH0"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_bananapi: led_pins@0 { -+ allwinner,pins = "PH24", "PG2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ vmmc3_pin_bananapro: vmmc3_pin@0 { -+ allwinner,pins = "PH22"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ gmac_power_pin_bananapi: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN -+ KEY_MENU KEY_SEARCH KEY_HOME -+ KEY_ESC KEY_ENTER>; -+ status = "okay"; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart2: serial@01c28800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart6: serial@01c29800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart6_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp: axp20x@34 { -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ axp,system-power-controller; -+ /include/ "x-powers-axp209.dtsi" -+ }; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapi>; -+ -+ green { -+ label = "bananapi:green:usr"; -+ gpios = <&pio 7 24 0>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ blue { -+ label = "bananapi:blue:usr"; -+ gpios = <&pio 6 2 0>; -+ linux,default-trigger = "mmc0"; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ status = "okay"; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ pinctrl-0 = <&usb1_vbus_pin_bananapro>; -+ gpio = <&pio 7 0 0>; /* PH0 */ -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ pinctrl-0 = <&usb2_vbus_pin_bananapro>; -+ gpio = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapi>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ status = "okay"; -+ }; -+ -+ reg_vmmc3: vmmc3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vmmc3_pin_bananapro>; -+ regulator-name = "vmmc3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 22 0>; -+ }; -+}; -diff -Naur linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts ---- linux-3.14.30.org/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts 2015-01-29 19:56:17.000000000 +0100 -+++ linux-3.14.30/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts 2015-01-30 00:00:01.678340873 +0100 -@@ -199,7 +199,7 @@ - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -- startup-delay-us = <50000>; -+ startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 0>; - status = "okay";
hooks/post-receive -- IPFire 2.x development tree
-
git＠ipfire.org