[git.ipfire.org] IPFire 2.x development tree branch, thirteen, updated. bb91f5a5440c761640b4b413a3ba8f476e05a4d6

[git@ipfire.org]

[-- Attachment #1: Type: text/plain, Size: 4601 bytes --]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".

The branch, thirteen has been updated
       via  bb91f5a5440c761640b4b413a3ba8f476e05a4d6 (commit)
      from  ee9987e89e10e8f1bd13b77ce759e4ade8070235 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit bb91f5a5440c761640b4b413a3ba8f476e05a4d6
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date:   Sun Nov 18 00:06:39 2012 +0100

    w_scan: some fixes for startskript.

-----------------------------------------------------------------------

Summary of changes:
 config/w_scan/w_scan_start | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)
 mode change 100644 => 100755 config/w_scan/w_scan_start

Difference in files:
diff --git a/config/w_scan/w_scan_start b/config/w_scan/w_scan_start
old mode 100644
new mode 100755
index 7a908e6..0f624ac
--- a/config/w_scan/w_scan_start
+++ b/config/w_scan/w_scan_start
@@ -46,6 +46,9 @@ yes_no ()
 
 WSCAN=$(which w_scan)
 
+# Whiptail does not like en_US.UTF-8
+LANG=c
+
 # Some initial checks...
 if [ -z $WSCAN ];then 
 	err_msg "w_scan not found!";
@@ -56,17 +59,16 @@ fi
 
 # Is vdr running?
 if [ "$(ps -A | grep " runvdr$")" != "" ] ;then
-	yes_no "Vdr is runnung. Cannot scan with active vdr. Should i stop it?"
+	yes_no "VDR is running. Cannot scan with active VDR. Should I stop it?"
 	clear
 	/etc/init.d/vdr stop
-	HAS_VDR_STOPPED=YES
 fi
 
 # Select DVB type
 whiptail --checklist "\nSelect DVB type" 12 40 3 \
                      DVB-T "Terrestrial" yes \
                      DVB-C "Cable"       no \
-                     DVB-S "Satelite"    no \
+                     DVB-S "Satellite"   no \
                      2>/tmp/w_scan_type
 chk_cancel
 W_SCAN_TYPE=$(cat /tmp/w_scan_type)
@@ -88,32 +90,32 @@ fi
 if [[ "$W_SCAN_TYPE" == *DVB-S* ]]; then
 	# Generate and run separate satelite menubox and default astra
 	echo '#!/bin/bash' > /tmp/w_scan_satselect.sh
-	echo 'whiptail --checklist "\nSelect satelites" 19 70 10 \' >> /tmp/w_scan_satselect.sh
+	echo 'whiptail --checklist "\nSelect satellites" 19 70 10 \' >> /tmp/w_scan_satselect.sh
 	$WSCAN -s? 2>&1 | cut -f2,4 | sed 's|[	]| "|g' | sed 's|$|" off \\|g' | sed 's|19.2 east.*|19.2 east Astra 1F/1G/1H/1KR/1L" on \\|g' >> /tmp/w_scan_satselect.sh
-	echo ' 2>/tmp/w_scan_satelite' >> /tmp/w_scan_satselect.sh
+	echo ' 2>/tmp/w_scan_satellite' >> /tmp/w_scan_satselect.sh
 	sh /tmp/w_scan_satselect.sh
 	chk_cancel
 	rm /tmp/w_scan_satselect.sh
-	W_SCAN_SATELITE=$(cat /tmp/w_scan_satelite | sed 's|"||g')
-	rm /tmp/w_scan_satelite
+	W_SCAN_SATELLITE=$(cat /tmp/w_scan_satellite | sed 's|"||g')
+	rm /tmp/w_scan_satellite
 fi
 
 # Now start the scan ...
 clear
 rm -rf /tmp/channels.conf
 if [[ "$W_SCAN_TYPE" == *DVB-T* ]]; then
-	echo ":->W-SCAN DVB-T $(date)" >>/tmp/channels.conf
+	echo ":->W-SCAN DVB-T $(date +%Y%m%d%H%M)" >>/tmp/channels.conf
 	$WSCAN -f t -c $W_SCAN_COUNTRY -C UTF-8 >>/tmp/channels.conf
 fi
 if [[ "$W_SCAN_TYPE" == *DVB-C* ]]; then
-	echo ":->W-SCAN DVB-C $(date)" >>/tmp/channels.conf
+	echo ":->W-SCAN DVB-C $(date +%Y%m%d%H%M)" >>/tmp/channels.conf
 	$WSCAN -f c -c $W_SCAN_COUNTRY -C UTF-8 >>/tmp/channels.conf
 fi
 if [[ "$W_SCAN_TYPE" == *DVB-S* ]]; then
-	for SATELITE in $W_SCAN_SATELITE;
+	for SATELLITE in $W_SCAN_SATELLITE;
 	do
-		echo ":->W-SCAN DVB-S-$SATELITE $(date)" >>/tmp/channels.conf
-		$WSCAN -f s -s $SATELITE -C UTF-8 >>/tmp/channels.conf
+		echo ":->W-SCAN DVB-S $SATELLITE $(date +%Y%m%d%H%M)" >>/tmp/channels.conf
+		$WSCAN -f s -s $SATELLITE -C UTF-8 >>/tmp/channels.conf
 	done
 fi
 
@@ -123,12 +125,12 @@ echo Results saved to w_scan-$(date +%Y%m%d%H%M).channels.conf
 
 # Do this only if vdr is installed ...
 if [ -e /opt/pakfire/db/installed/meta-vdr ]; then
-	yes_no "Install new channels-conf for vdr."
+	yes_no "Install new channels-conf for VDR."
 	# Backup old channels conf...
 	cp -f /opt/vdr/etc/channels.conf \
 		/opt/vdr/etc/channels.conf.backup$(date +%Y%m%d%H%M)
 	cp -f /tmp/channels.conf /opt/vdr/etc/
-	yes_no "Should i start the vdr?"
+	yes_no "Should i start the VDR?"
 	clear
 	/etc/init.d/vdr start
 fi


hooks/post-receive
--
IPFire 2.x development tree