[git.ipfire.org] IPFire 2.x development tree branch, next, updated. acb759575e610e8a94f6b05ff19a5418aa7a91b7

[git@ipfire.org]

[-- Attachment #1: Type: text/plain, Size: 11381 bytes --]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".

The branch, next has been updated
       via  acb759575e610e8a94f6b05ff19a5418aa7a91b7 (commit)
       via  f3dce179849c7898cafff729f17b4b407b1f155e (commit)
      from  0fbba54e825ad4d21762e0deb788ec6614d0e744 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit acb759575e610e8a94f6b05ff19a5418aa7a91b7
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date:   Sat Apr 11 22:03:03 2015 +0200

    hostapd: update to 2.4

commit f3dce179849c7898cafff729f17b4b407b1f155e
Author: Arne Fitzenreiter <arne_f(a)ipfire.org>
Date:   Sat Apr 11 22:02:33 2015 +0200

    wpa_supplicant: update to 2.4

-----------------------------------------------------------------------

Summary of changes:
 config/hostapd/config | 185 ++++++++++++++++++++++++++++++++++++++++++++++----
 lfs/hostapd           |   4 +-
 lfs/wpa_supplicant    |   4 +-
 3 files changed, 177 insertions(+), 16 deletions(-)

Difference in files:
diff --git a/config/hostapd/config b/config/hostapd/config
index 1cd7676..c3672c5 100644
--- a/config/hostapd/config
+++ b/config/hostapd/config
@@ -15,10 +15,6 @@ CONFIG_DRIVER_HOSTAP=y
 # Driver interface for wired authenticator
 #CONFIG_DRIVER_WIRED=y
 
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
 # Driver interface for Prism54 driver
 CONFIG_DRIVER_PRISM54=y
 
@@ -49,14 +45,14 @@ CONFIG_RSN_PREAUTH=y
 CONFIG_PEERKEY=y
 
 # IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
+CONFIG_IEEE80211W=y
 
 # Integrated EAP server
 CONFIG_EAP=y
 
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+CONFIG_ERP=y
+
 # EAP-MD5 for the integrated EAP server
 CONFIG_EAP_MD5=y
 
@@ -91,6 +87,9 @@ CONFIG_EAP_TTLS=y
 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
 #CONFIG_EAP_PSK=y
 
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
 # EAP-SAKE for the integrated EAP server
 #CONFIG_EAP_SAKE=y
 
@@ -110,6 +109,8 @@ CONFIG_EAP_TTLS=y
 CONFIG_WPS=y
 # Enable UPnP support for external WPS Registrars
 CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
 
 # EAP-IKEv2
 CONFIG_EAP_IKEV2=y
@@ -117,6 +118,9 @@ CONFIG_EAP_IKEV2=y
 # Trusted Network Connect (EAP-TNC)
 CONFIG_EAP_TNC=y
 
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
@@ -138,14 +142,171 @@ CONFIG_IEEE80211R=y
 # IEEE 802.11n (High Throughput) support
 CONFIG_IEEE80211N=y
 
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
 # Remove debugging code that is printing out debug messages to stdout.
 # This can be used to reduce the size of the hostapd considerably if debugging
 # code is not needed.
 CONFIG_NO_STDOUT_DEBUG=y
 
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
 
-# Enable AUTO_CHANNEL_SELECTION
-# This is needed for dfs (radar detection) channels
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+#CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
 CONFIG_ACS=y
diff --git a/lfs/hostapd b/lfs/hostapd
index 2252837..e928668 100644
--- a/lfs/hostapd
+++ b/lfs/hostapd
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.3
+VER        = 2.4
 
 THISAPP    = hostapd-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -44,7 +44,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = 40b89c61036add0c2dd1fc10767d3b5f
+$(DL_FILE)_MD5 = 04578f3f2c3eb1bec1adf30473813912
 
 install : $(TARGET)
 
diff --git a/lfs/wpa_supplicant b/lfs/wpa_supplicant
index 1cebaab..e7f46de 100644
--- a/lfs/wpa_supplicant
+++ b/lfs/wpa_supplicant
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.3
+VER        = 2.4
 
 THISAPP    = wpa_supplicant-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5 = f2ed8fef72cf63d8d446a2d0a6da630a
+$(DL_FILE)_MD5 = f0037dbe03897dcaf2ad2722e659095d
 
 install : $(TARGET)
 


hooks/post-receive
--
IPFire 2.x development tree