From: Michael Tremer <git@ipfire.org>
To: ipfire-scm@lists.ipfire.org
Subject: [git.ipfire.org] IPFire 2.x development tree branch, next, updated. b4fa906f8d0293b4e92c4f6e9aea83786d5a240a
Date: Thu, 14 Mar 2024 09:37:12 +0000 [thread overview]
Message-ID: <4TwMjN4r6lz2yK7@people01.haj.ipfire.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 6114 bytes --]
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "IPFire 2.x development tree".
The branch, next has been updated
via b4fa906f8d0293b4e92c4f6e9aea83786d5a240a (commit)
via fab2e0abd4b24f4968addd528b228002a3f8e3f6 (commit)
from a18358290945cc28b5231f703ff13187a33a63ca (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit b4fa906f8d0293b4e92c4f6e9aea83786d5a240a
Author: Michael Tremer <michael.tremer(a)ipfire.org>
Date: Thu Mar 14 09:34:17 2024 +0000
core185: Ship intel-microcode
Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
commit fab2e0abd4b24f4968addd528b228002a3f8e3f6
Author: Adolf Belka <adolf.belka(a)ipfire.org>
Date: Wed Mar 13 22:47:18 2024 +0100
intel-microcode: Update to version 20240312
- Update from version 20231114 to 20240312
- Update of rootfile
- For the changelog details see the releasenote.md file in the source tarball.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
-----------------------------------------------------------------------
Summary of changes:
config/rootfiles/common/x86_64/intel-microcode | 5 ++++-
.../121 => core/185}/filelists/x86_64/intel-microcode | 0
config/rootfiles/core/185/update.sh | 13 ++++++++++++-
lfs/intel-microcode | 6 +++---
4 files changed, 19 insertions(+), 5 deletions(-)
copy config/rootfiles/{oldcore/121 => core/185}/filelists/x86_64/intel-microcode (100%)
Difference in files:
diff --git a/config/rootfiles/common/x86_64/intel-microcode b/config/rootfiles/common/x86_64/intel-microcode
index 7f9632973..5037ac6a8 100644
--- a/config/rootfiles/common/x86_64/intel-microcode
+++ b/config/rootfiles/common/x86_64/intel-microcode
@@ -95,7 +95,6 @@ lib/firmware/intel-ucode/06-8e-09
lib/firmware/intel-ucode/06-8e-0a
lib/firmware/intel-ucode/06-8e-0b
lib/firmware/intel-ucode/06-8e-0c
-lib/firmware/intel-ucode/06-8f-04
lib/firmware/intel-ucode/06-8f-05
lib/firmware/intel-ucode/06-8f-06
lib/firmware/intel-ucode/06-8f-07
@@ -117,12 +116,16 @@ lib/firmware/intel-ucode/06-a5-05
lib/firmware/intel-ucode/06-a6-00
lib/firmware/intel-ucode/06-a6-01
lib/firmware/intel-ucode/06-a7-01
+lib/firmware/intel-ucode/06-aa-04
lib/firmware/intel-ucode/06-b7-01
lib/firmware/intel-ucode/06-ba-02
lib/firmware/intel-ucode/06-ba-03
+lib/firmware/intel-ucode/06-ba-08
lib/firmware/intel-ucode/06-be-00
lib/firmware/intel-ucode/06-bf-02
lib/firmware/intel-ucode/06-bf-05
+lib/firmware/intel-ucode/06-cf-01
+lib/firmware/intel-ucode/06-cf-02
lib/firmware/intel-ucode/0f-00-07
lib/firmware/intel-ucode/0f-00-0a
lib/firmware/intel-ucode/0f-01-02
diff --git a/config/rootfiles/core/185/filelists/x86_64/intel-microcode b/config/rootfiles/core/185/filelists/x86_64/intel-microcode
new file mode 120000
index 000000000..d5ac074e2
--- /dev/null
+++ b/config/rootfiles/core/185/filelists/x86_64/intel-microcode
@@ -0,0 +1 @@
+../../../../common/x86_64/intel-microcode
\ No newline at end of file
diff --git a/config/rootfiles/core/185/update.sh b/config/rootfiles/core/185/update.sh
index 33a05be39..3dce4693c 100644
--- a/config/rootfiles/core/185/update.sh
+++ b/config/rootfiles/core/185/update.sh
@@ -49,6 +49,7 @@ rm -rvf \
/lib/firmware/ath11k/WCN6855/hw2.0/Notice.txt \
/lib/firmware/intel-ucode/06-86-04 \
/lib/firmware/intel-ucode/06-86-05 \
+ /lib/firmware/intel-ucode/06-8f-04 \
/sbin/xtables-multi \
/srv/web/ipfire/html/themes/ipfire-rounded \
/usr/lib/crda/pubkeys/linville.key.pub.pem \
@@ -113,8 +114,18 @@ mv /var/ipfire/ovpn/ovpnconfig.new /var/ipfire/ovpn/ovpnconfig
# Set correct ownership
chown nobody:nobody /var/ipfire/ovpn/ovpnconfig
+# Rebuild initial ramdisks
+dracut --regenerate-all --force
+KVER="xxxKVERxxx"
+case "$(uname -m)" in
+ aarch64)
+ mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
+ # dont remove initramfs because grub need this to boot.
+ ;;
+esac
+
# This update needs a reboot...
-#touch /var/run/need_reboot
+touch /var/run/need_reboot
# Finish
/etc/init.d/fireinfo start
diff --git a/lfs/intel-microcode b/lfs/intel-microcode
index 5e262dda3..785b2303b 100644
--- a/lfs/intel-microcode
+++ b/lfs/intel-microcode
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -24,7 +24,7 @@
include Config
-VER = 20231114
+VER = 20240312
THISAPP = Intel-Linux-Processor-Microcode-Data-Files-microcode-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -41,7 +41,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = e6084c92e9c3cc627af25a7f2f7fb26230b6ed117ddc197d19991df2816334132af92925f23af829bad005c32d0bd3afc362055ef223a599799d846216cf7612
+$(DL_FILE)_BLAKE2 = 43c771becef0f6dbfd41bf78a9a3cc8f6679a43ea48765d0e7f555c138dca6e3db42a4d33f743d8d51f38b0b6aa69322bba0c00ae9f1ff4c533b52166ee54747
install : $(TARGET)
hooks/post-receive
--
IPFire 2.x development tree
reply other threads:[~2024-03-14 9:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4TwMjN4r6lz2yK7@people01.haj.ipfire.org \
--to=git@ipfire.org \
--cc=ipfire-scm@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox