[PATCH] mysql: upgraded to mariadb 10.1.14

ummeegge ummeegge at ipfire.org
Tue Jun 7 17:00:58 CEST 2016


Hi all,
no Daniel i used it in the old fashion way. Will check the next installation by the described procedure. Have seen you opened up a topic in the forum, will post you there my results.

Thank you both. Greetings,

Erik


Am 07.06.2016 um 14:35 schrieb Michael Tremer <michael.tremer at ipfire.org>:

> On Tue, 2016-06-07 at 14:34 +0200, Daniel Weismüller wrote:
>> Hi Erik
>> 
>> Did you installed it like this?
>> "name=mysql ./update.sh"
> 
> NAME=mysql ./update.sh
> 
>> 
>> Or how?
>> 
>> - Daniel
>> 
>> 
>> 
>> 
>> Am 07.06.2016 um 12:24 schrieb ummeegge:
>>> Hi Daniel,
>>> have installed MariaDB and wanted to give you a fast feedback. Since i had
>>> the old MySQL installed but only stopped and not uninstalled before
>>> installation i faced two problems after installation.
>>> The first one was while installation process where i got the following
>>> output:
>>> 
>>> Restoring Backup...
>>> ...Finished.
>>> /opt/pakfire/lib/functions.sh: line 93: /etc/init.d/: Is a directory
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL server is still not running. Waiting 5 seconds.
>>> MySQL still noch running... Exiting.
>>> 
>>> 
>>> but i could start MariaDB with an /etc/init.d/mysql start. Currently not
>>> sure where this problem comes from.
>>> 
>>> The second one was, i tried to entered into MariaDB over the root user but
>>> no password delivers the same than the old password which was 'mysqlfire',
>>> the output was:
>>> 
>>> ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using
>>> password: YES)
>>> 
>>> i needed to make a fast work around:
>>> 
>>> /etc/init.d/mysql stop
>>> mysqld_safe --skip-grant-tables --skip-networking &
>>> 
>>> than it was possible to entered into via a second console into MariaDB
>>> without password and i could set in that way also the new/(old) one:
>>> 
>>> mysql -u root
>>> use mysql;
>>> update user set password=PASSWORD("mysqlfire") where User='root';
>>> flush privileges;
>>> exit
>>> 
>>> may this could help someone else, or you have some other hints for upgrading
>>> the old to the new one ?!
>>> 
>>> Have added new databases, tables and templates which seems to work smoothly.
>>> I try currently to use the new MariaDB for pmacct --> http://forum.ipfire.or
>>> g/viewtopic.php?f=50&t=14849#p90102 will see how it works...
>>> 
>>> Greetings,
>>> 
>>> Erik
>>> 
>>> 
>>> 
>>> Am 06.06.2016 um 13:40 schrieb Daniel Weismüller <daniel.weismueller at ipfire.
>>> org>:
>>> 
>>>> As promised :-)
>>>> 
>>>> For all who want to test it I've uploaded the package to my people folder.
>>>> 
>>>> http://people.ipfire.org/~dweismueller/mysql-10.1.14-5.ipfire
>>>> 
>>>> Am 06.06.2016 um 13:34 schrieb Daniel Weismüller:
>>>>> Signed-off-by: Daniel Weismüller <daniel.weismueller at ipfire.org>
>>>>> ---
>>>>>  config/mysql/my.cnf          | 6 +++---
>>>>>  lfs/mysql                    | 8 ++++----
>>>>>  src/initscripts/init.d/mysql | 2 +-
>>>>>  3 files changed, 8 insertions(+), 8 deletions(-)
>>>>> 
>>>>> diff --git a/config/mysql/my.cnf b/config/mysql/my.cnf
>>>>> index 29a568a..f301bcf 100644
>>>>> --- a/config/mysql/my.cnf
>>>>> +++ b/config/mysql/my.cnf
>>>>> @@ -1,11 +1,11 @@
>>>>>  [client]
>>>>>  password = mysqlfire
>>>>>  port = 3306
>>>>> -socket = /var/run/mysql/mysql.sock
>>>>> +socket = /var/run/mysql/mysqld.sock
>>>>>    [mysqld]
>>>>>  port = 3306
>>>>> -socket = /var/run/mysql/mysql.sock
>>>>> +socket = /var/run/mysql/mysqld.sock
>>>>>  datadir = /srv/mysql
>>>>>  bind-address=127.0.0.1
>>>>>  @@ -14,7 +14,7 @@ user=mysql
>>>>>    [mysqld_safe]
>>>>>  log-error=/var/log/mysqld.log
>>>>> -#pid-file=/var/run/mysqld/mysqld.pid
>>>>> +pid-file=/var/run/mysql/mysqld.pid
>>>>>    [mysql]
>>>>>  no-auto-rehash
>>>>> diff --git a/lfs/mysql b/lfs/mysql
>>>>> index 2253928..f254e35 100644
>>>>> --- a/lfs/mysql
>>>>> +++ b/lfs/mysql
>>>>> @@ -24,7 +24,7 @@
>>>>>    include Config
>>>>>  -VER        = 10.1.12
>>>>> +VER        = 10.1.14
>>>>>    THISAPP    = mariadb-$(VER)
>>>>>  DL_FILE    = $(THISAPP).tar.gz
>>>>> @@ -32,7 +32,7 @@ DL_FROM    = $(URL_IPFIRE)
>>>>>  DIR_APP    = $(DIR_SRC)/$(THISAPP)
>>>>>  TARGET     = $(DIR_INFO)/$(THISAPP)
>>>>>  PROG       = mysql
>>>>> -PAK_VER    = 4
>>>>> +PAK_VER    = 5
>>>>>    CFLAGS    += -fno-strict-aliasing -fno-delete-null-pointer-checks
>>>>>  @@ -44,7 +44,7 @@ objects = $(DL_FILE)
>>>>>    $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>>  -$(DL_FILE)_MD5 = a2c0809f27ec112139c2c50f03569b2b
>>>>> +$(DL_FILE)_MD5 = 294925531e0fd2f0461e3894496a5adc
>>>>>    install : $(TARGET)
>>>>>  @@ -100,7 +100,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>  		-DMYSQL_UNIX_ADDR="/var/run/mysql/mysql.sock" \
>>>>>  		-DMYSQL_DATADIR="/srv/mysql" \
>>>>>  		-DTMPDIR="/var/tmp" \
>>>>> -		-DPID_FILE_DIR="/var/run/mysql"
>>>>> +		-DPID_FILE_DIR="/var/run/mysql" \
>>>>>  		-DENABLED_LOCAL_INFILE=ON \
>>>>>  		-DWITH_EMBEDDED_SERVER=OFF \
>>>>>  		-DWITH_SSL=system \
>>>>> diff --git a/src/initscripts/init.d/mysql b/src/initscripts/init.d/mysql
>>>>> index 2c8cfbc..a798793 100644
>>>>> --- a/src/initscripts/init.d/mysql
>>>>> +++ b/src/initscripts/init.d/mysql
>>>>> @@ -10,7 +10,7 @@
>>>>>  . /etc/sysconfig/rc
>>>>>  . $rc_functions
>>>>>  -PIDFILE=/var/run/mysql/mysql.pid
>>>>> +PIDFILE=/var/run/mysql/mysqld.pid
>>>>>  KILLDELAY=20
>>>>>    case "$1" in
>>>> 
>> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 842 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.ipfire.org/pipermail/development/attachments/20160607/b9acbc1d/attachment.sig>


More information about the Development mailing list