Re: ipfire on a pandaboard

Re: ipfire on a pandaboard

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 2059 bytes --]

Hey,

I tried to find out if that version should be supported. I am not very
about that, because I do not know if kernel 3.2 has support for
PandaBoard ES at all.

I hope that Arne will respond to this when he is back.

-Michael

On Tue, 2013-07-23 at 17:36 -0500, Timothy Ehlers wrote:
> I have never gotten ipfire to work on, previously fedora 18 was
> working... barely, there is a kernel bug that forces you to not use
> SMP.
> 
> 
> I have tried 2.13 core 71/70 and now 68.
> 
> 
> I have the pandaboard ES revision B.
> 
> 
> On Tue, Jul 23, 2013 at 3:42 AM, Michael Tremer
> <michael.tremer(a)ipfire.org> wrote:
>         Hey Tim,
>         
>         when you see u-boot booting and it loads the kernel, it seems
>         that you
>         have flashed the image correctly onto the SD card.
>         
>         What version/revision of the Pandaboard are you using? Do
>         other older
>         releases of IPFire work?
>         
>         In general the image is ready for Pandaboard (not the ES
>         version AFAIK).
>         
>         -Michael
>         
>         On Mon, 2013-07-22 at 21:33 -0500, Timothy Ehlers wrote:
>         > Im having a bit of trouble getting ipfire to post on my
>         pandaboard.
>         >
>         >
>         > its hanging at this prompt
>         >
>         >
>         > "
>         > Starting kernel ...
>         >
>         >
>         > Uncompressing Linux... done, booting the kernel.
>         > "
>         >
>         >
>         > At this point i just hangs. ive tried
>         > ipfire-2.13.1gb-ext4.armv5tel-full-core70.img
>         >
>         > and
>         > ipfire-2.13.1gb-ext4.armv5tel-full-core71.img
>         >
>         >
>         > Has anybody gotten this to work on a pandaboard?
>         > --
>         > Tim Ehlers
>         
>         > _______________________________________________
>         > SIG-ARM mailing list
>         > SIG-ARM(a)lists.ipfire.org
>         > http://lists.ipfire.org/mailman/listinfo/sig-arm
>         
> 
> 
> 
> 
> -- 
> Tim Ehlers

Re: ipfire on a pandaboard

[Arne Fitzenreiter]

[-- Attachment #1: Type: text/plain, Size: 777 bytes --]

On 2013-07-23 04:33, Timothy Ehlers wrote:
> Im having a bit of trouble getting ipfire to post on my pandaboard.
> 
> its hanging at this prompt
> 
> "
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> "
> 
> At this point i just hangs. ive tried 
> ipfire-2.13.1gb-ext4.armv5tel-full-core70.img
> 
> and 
> ipfire-2.13.1gb-ext4.armv5tel-full-core71.img
> 
> Has anybody gotten this to work on a pandaboard?

Yes. I have tested it on pandaboard.

You use a serial console so you have to use the "scon" image or connect 
a keyboard and monitor with the normal image.

Arne


> -- 
> Tim Ehlers
> _______________________________________________
> SIG-ARM mailing list
> SIG-ARM(a)lists.ipfire.org
> http://lists.ipfire.org/mailman/listinfo/sig-arm

Re: ipfire on a pandaboard

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 951 bytes --]

Hey Tim,

when you see u-boot booting and it loads the kernel, it seems that you
have flashed the image correctly onto the SD card.

What version/revision of the Pandaboard are you using? Do other older
releases of IPFire work?

In general the image is ready for Pandaboard (not the ES version AFAIK).

-Michael

On Mon, 2013-07-22 at 21:33 -0500, Timothy Ehlers wrote:
> Im having a bit of trouble getting ipfire to post on my pandaboard.
> 
> 
> its hanging at this prompt
> 
> 
> "
> Starting kernel ...
> 
> 
> Uncompressing Linux... done, booting the kernel.
> "
> 
> 
> At this point i just hangs. ive tried 
> ipfire-2.13.1gb-ext4.armv5tel-full-core70.img
> 
> and 
> ipfire-2.13.1gb-ext4.armv5tel-full-core71.img
> 
> 
> Has anybody gotten this to work on a pandaboard?
> -- 
> Tim Ehlers
> _______________________________________________
> SIG-ARM mailing list
> SIG-ARM(a)lists.ipfire.org
> http://lists.ipfire.org/mailman/listinfo/sig-arm