Enable correct display of ipv6 entries in Firewall log pages of web UI.
3 main changes:
- Fill $iface and $out from PHYSIN and PHYSOUT when looking at bridged packets, othwerwise fill from IN and OUT
- Recognize ipv4 and ipv6 address style for $srcaddr and $dstaddr
- Match color coding of tables to pie charts (see seperate patch sent earlier)
I am using the bridged ipv6 setup as proposed in the wiki. I do not think this breaks anything when not using ipv6. So it would be nice to include this even if ipv6 is not officially supported yet. It is quite useful when using the ipv6 setup.
Signed-off-by: Michael Eitelwein <michael(a)eitelwein.net>
---
diff --git a/html/cgi-bin/logs.cgi/firewalllog.dat b/html/cgi-bin/logs.cgi/firewalllog.dat
index 5a584d6..42c9612 100644
--- a/html/cgi-bin/logs.cgi/firewalllog.dat
+++ b/html/cgi-bin/logs.cgi/firewalllog.dat
@@ -328,7 +328,10 @@ END
$lines = 0;
foreach $_ (@log)
{
- /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses a bridge, PHYSIN= contains the relevant iface information
+ # otherwise use IN=
+ if ($_ =~ /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif ($_ =~ /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
my $day = $1;
$day =~ tr / /0/;
my $time = $cgiparams{'DAY'} ? "$2" : "$day/$2" ;
@@ -336,9 +339,12 @@ foreach $_ (@log)
my $packet = $4;
my ($iface, $srcaddr, $dstaddr, $macaddr, $proto, $srcport, $dstport);
- $iface=$1 if $packet =~ /IN=(\w+)/;
- $srcaddr=$1 if $packet =~ /SRC=([\d\.]+)/;
- $dstaddr=$1 if $packet =~ /DST=([\d\.]+)/;
+ if ($packet =~ /PHYSIN=(\w+)/) { $iface=$1 } elsif ($packet =~ /IN=(\w+)/) { $iface = $1}
+ # Identify whether ipv4 or ipv6. Both are mutally exclusive.
+ if ($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) { $srcaddr=$1 }
+ if ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/) { $srcaddr=$1 }
+ if ($packet =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) { $dstaddr=$1 }
+ if ($packet =~ /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/) { $dstaddr=$1 }
$macaddr=$1 if $packet =~ /MAC=([\w+\:]+)/;
$proto=$1 if $packet =~ /PROTO=(\w+)/;
$srcport=$1 if $packet =~ /SPT=(\d+)/;
diff --git a/html/cgi-bin/logs.cgi/firewalllogcountry.dat b/html/cgi-bin/logs.cgi/firewalllogcountry.dat
index f998a62..efd2886 100644
--- a/html/cgi-bin/logs.cgi/firewalllogcountry.dat
+++ b/html/cgi-bin/logs.cgi/firewalllogcountry.dat
@@ -261,7 +261,6 @@ if( $cgiparams{'pienumber'} != 0){$pienumber=$cgiparams{'pienumber'};}
if( $cgiparams{'otherspie'} != 0){$otherspie=$cgiparams{'otherspie'};}
if( $cgiparams{'showpie'} != 0){$showpie=$cgiparams{'showpie'};}
if( $cgiparams{'sortcolumn'} != 0){$sortcolumn=$cgiparams{'sortcolumn'};}
-
print <<END
</select>
</td>
@@ -294,15 +293,24 @@ $lines = 0;
foreach $_ (@log)
{
- /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses bridge, use PHYSIN for iface, otherwise IN
+ if (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
my $packet = $4;
- $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";}
- $packet =~ /SRC=([\d\.]+)/; my $srcaddr=$1;
+ my $iface = '';
+ if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($packet =~ /IN=(\w+)/) { $iface = $1 }
+ if ( $1 =~ /2./ ) { $iface=''; }
+ my $srcaddr = '';
+ # Find ipv4 and ipv6 addresses
+ if ($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) { $srcaddr = $1 }
+ elsif ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/) { $srcaddr = $1 }
if($iface eq $red_interface) {
+ # Traffic from red
if($srcaddr ne '') {
+ # srcaddr is set
my $ccode = $gi->country_code_by_name($srcaddr);
- if( $ccode eq '') {
+ if ($ccode eq '') {
$ccode = 'unknown';
}
$tabjc{$ccode} = $tabjc{$ccode} + 1 ;
@@ -311,11 +319,16 @@ foreach $_ (@log)
}
}
else {
+ # Traffic not from red
if($iface ne '') {
$tabjc{$iface} = $tabjc{$iface} + 1 ;
if(($tabjc{$iface} == 1) && ($lines < $pienumber)) { $lines = $lines + 1; }
$linesjc++;
}
+ else {
+ # What to do with empty iface lines?
+ # This probably is traffic from ipfire itself (IN= OUT=XY)?
+ }
}
}
@@ -423,7 +436,6 @@ if ($showpie != 2 && $pienumber <= 50 && $pienumber != 0) {
print "<img src='/graphs/fwlog-country$imagerandom.png'>";
print "</div>";
}
-
print <<END
<table width='100%' class='tbl'>
<tr>
@@ -448,10 +460,8 @@ for($s=0;$s<$lines;$s++)
$percent = $value[$s] * 100 / $linesjc;
$percent = sprintf("%.f", $percent);
$total = $total + $value[$s];
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
$color++;
print "<tr>";
@@ -466,8 +476,10 @@ for($s=0;$s<$lines;$s++)
print"<input type='hidden' name='country' value='$key[$s]'>";
print"<input type='submit' value='details'></form>";
}
-
- if($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq 'orange0') {
+ elsif ($key[$s] eq 'unknown') {
+ print "unknown";
+ }
+ if ($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq 'orange0' || $key[$s] eq 'brip6') {
print "<td align='center' $col>$key[$s]</td>";
}
else {
@@ -489,10 +501,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){}
else{
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/firewalllogip.dat b/html/cgi-bin/logs.cgi/firewalllogip.dat
index 7d82d20..6fc3422 100644
--- a/html/cgi-bin/logs.cgi/firewalllogip.dat
+++ b/html/cgi-bin/logs.cgi/firewalllogip.dat
@@ -291,7 +291,8 @@ if ($pienumber == -1 || $pienumber > $lines || $sortcolumn == 2) { $pienumber =
$lines = 0;
foreach $_ (@log)
{
- if($_ =~ /SRC\=([\d\.]+)/){
+ # Extract ipv4 or ipv6 address
+ if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
$tabjc{$1} = $tabjc{$1} + 1 ;
if(($tabjc{$1} == 1) && ($lines < $pienumber)) { $lines = $lines + 1; }
$linesjc++;
@@ -428,10 +429,8 @@ for($s=0;$s<$lines;$s++)
$percent = $value[$s] * 100 / $linesjc;
$percent = sprintf("%.f", $percent);
$total = $total + $value[$s];
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
print "<tr>";
@@ -459,10 +458,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){}
else{
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/firewalllogport.dat b/html/cgi-bin/logs.cgi/firewalllogport.dat
index 5b0db62..583c1b3 100644
--- a/html/cgi-bin/logs.cgi/firewalllogport.dat
+++ b/html/cgi-bin/logs.cgi/firewalllogport.dat
@@ -429,10 +429,8 @@ for($s=0;$s<$lines;$s++)
$percent = $value[$s] * 100 / $linesjc;
$percent = sprintf("%.f", $percent);
$total = $total + $value[$s];
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
print "<tr>";
@@ -446,10 +444,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){}
else{
- my $colorIndex = $color % 10;
- if($colorIndex == 0) {
- $colorIndex = 10;
- }
+ # colors are numbered 1 to 10
+ my $colorIndex = ($color % 10) + 1;
$col="bgcolor='$color{\"color$colorIndex\"}'";
print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
index 5283c42..0784ab9 100644
--- a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
+++ b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat
@@ -158,23 +158,35 @@ if (!$skip)
{
while (<FILE>)
{
- if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
- my $packet = $2;
- $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";}
- $packet =~ /SRC=([\d\.]+)/; my $srcaddr=$1;
+ # First check whether valid log line (date, day)
+ if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
+ # If ipv6 uses bridge, then use PHYSIN otherwise use IN
+ if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(PHYSIN=.*)$/) {}
+ elsif (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {}
+ my $packet = $2;
+ my $iface = '';
+ my $srcaddr = '';
+ # If ipv6 uses bridge, use PHYSIN otherwise IN
+ if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($packet =~ /IN=(\w+)/) { $iface = $1 }
+ # Extract ipv4 and ipv6 addresses
+ if (($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
+ $srcaddr = $1
+ };
if($iface eq $country) {
+ # iface matches country code
$log[$lines] = $_;
$lines++;
}
elsif($srcaddr ne '') {
+ # or srcaddr matches country code
my $ccode = $gi->country_code_by_name($srcaddr);
if($ccode eq $country){
$log[$lines] = $_;
$lines++;
}
}
- }
+ }
}
close (FILE);
}
@@ -194,16 +206,28 @@ if ($multifile) {
}
if (!$skip) {
while (<FILE>) {
- if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
- if($_ =~ /SRC\=([\d\.]+)/){
- my $srcaddr=$1;
- my $ccode = $gi->country_code_by_name($srcaddr);
- if($ccode eq $country){
+ # Check if valid log line (date, day)
+ if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
+ my $iface = '';
+ # If ipv6 uses bridge, then use PHYSIN otherwise IN
+ if ($_ =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($_ =~ /IN=(\w+)/) { $iface = $1 }
+
+ if($iface eq $country) {
+ # iface matches country code
+ $log[$lines] = $_;
+ $lines++;
+ }
+ # extract ipv4 and ipv6 address
+ elsif (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
+ my $srcaddr=$1;
+ my $ccode = $gi->country_code_by_name($srcaddr);
+ if($ccode eq $country){
+ # or srcaddr matches country code
$log[$lines] = $_;
$lines++;
+ }
}
- }
- }
+ }
}
close (FILE);
}
@@ -308,32 +332,45 @@ $lines = 0;
foreach $_ (@slice)
{
$a = $_;
- /^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses bridge, use PHYSIN otherwise use IN
+ if (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif (/^... (..) (..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {};
my $packet = $4;
- $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";}
- $packet =~ /SRC=([\d\.]+)/; my $srcaddr=$1;
+ my $iface = '';
+ # If ipv6 uses bridge, use PHYSIN otherwise use IN
+ if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($packet =~ /IN=(\w+)/) { $iface = $1 }
+ if ( $1 =~ /2./ ){ $iface="";}
+ my $srcaddr = '';
+ # Extract ipv4 and ipv6 addresses
+ if (($packet =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($packet =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
+ $srcaddr = $1
+ };
if($iface eq $country || $srcaddr ne '') {
- my $ccode;
+ my $ccode='';
if($iface ne $country) {
$ccode = $gi->country_code_by_name($srcaddr);
}
if($iface eq $country || $ccode eq $country) {
- my $chain = '';
+ my $chain = '';
my $in = '-'; my $out = '-';
my $srcaddr = ''; my $dstaddr = '';
my $protostr = '';
my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses bridge, the use PHYSIN otherwise use IN
+ if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
my $timestamp = $1; my $chain = $2; my $packet = $3;
$timestamp =~ /(...) (..) (..:..:..)/;
my $month = $1; my $day = $2; my $time = $3;
- if ($a =~ /IN\=(\w+)/) { $iface = $1; }
- if ($a =~ /OUT\=(\w+)/) { $out = $1; }
- if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
- if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
+ # If ipv6 uses bridge, use PHYSIN and PHYSOUT, otherwise use IN and OUT
+ if ($a =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($a =~ /IN=(\w+)/) { $iface = $1 }
+ if ($a =~ /PHYSOUT=(\w+)/) { $out = $1 } elsif ($a =~ /OUT=(\w+)/) { $out = $1 }
+ # Extract ipv4 and ipv6 addresses
+ if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; }
+ if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; }
if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
my $protostrlc = lc($protostr);
if ($a =~ /SPT\=([\d\.]+)/){ $srcport = $1; }
diff --git a/html/cgi-bin/logs.cgi/showrequestfromip.dat b/html/cgi-bin/logs.cgi/showrequestfromip.dat
index 09a60b5..94e795c 100644
--- a/html/cgi-bin/logs.cgi/showrequestfromip.dat
+++ b/html/cgi-bin/logs.cgi/showrequestfromip.dat
@@ -155,7 +155,7 @@ if (!$skip)
while (<FILE>)
{
if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
- if($_ =~ /SRC\=([\d\.]+)/){
+ if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
if($1 eq $ip){
$log[$lines] = $_;
$lines++;
@@ -182,12 +182,12 @@ if ($multifile) {
if (!$skip) {
while (<FILE>) {
if (/(^${monthstr} ${daystr} ..:..:..) [\w\-]+ kernel:.*(IN=.*)$/) {
- if($_ =~ /SRC\=([\d\.]+)/){
- if($1 eq $ip){
+ if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
+ if($1 eq $ip){
$log[$lines] = $_;
$lines++;
- }
- }
+ }
+ }
}
}
close (FILE);
@@ -293,7 +293,8 @@ $lines = 0;
foreach $_ (@slice)
{
$a = $_;
- if($_ =~ /SRC\=([\d\.]+)/){
+ # Check whether valid ipv4 or ipv6 address
+ if (($_ =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($_ =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) {
if($1 eq $ip){
my $chain = '';
my $in = '-'; my $out = '-';
@@ -301,15 +302,19 @@ foreach $_ (@slice)
my $protostr = '';
my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses bridge, the use PHYSIN, otherwise use IN
+ if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
my $timestamp = $1; my $chain = $2; my $packet = $3;
$timestamp =~ /(...) (..) (..:..:..)/;
my $month = $1; my $day = $2; my $time = $3;
- if ($a =~ /IN\=(\w+)/) { $iface = $1; }
- if ($a =~ /OUT\=(\w+)/) { $out = $1; }
- if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
- if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
+ # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise use IN and OUT
+ if ($a =~ /PHYSIN=(\w+)/) { $iface = $1 } elsif ($a =~ /IN=(\w+)/) { $iface = $1 }
+ if ($a =~ /PHYSOUT=(\w+)/) { $out = $1 } elsif ($a =~ /OUT=(\w+)/) { $out = $1 }
+ # Detect ipv4 and ipv6 addresses
+ if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; }
+ if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; }
if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
my $protostrlc = lc($protostr);
if ($a =~ /SPT\=([\d\.]+)/){ $srcport = $1; }
diff --git a/html/cgi-bin/logs.cgi/showrequestfromport.dat b/html/cgi-bin/logs.cgi/showrequestfromport.dat
index ad9823c..af7779a 100644
--- a/html/cgi-bin/logs.cgi/showrequestfromport.dat
+++ b/html/cgi-bin/logs.cgi/showrequestfromport.dat
@@ -307,15 +307,19 @@ foreach $_ (@slice)
my $protostr = '';
my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/;
+ # If ipv6 uses bridge, the use PHYSIN, otherwise use IN
+ if ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(PHYSIN=.*)$/) {}
+ elsif ($_ =~ /(^.* ..:..:..) [\w\-]+ kernel:(.*)(IN=.*)$/) {}
my $timestamp = $1; my $chain = $2; my $packet = $3;
$timestamp =~ /(...) (..) (..:..:..)/;
my $month = $1; my $day = $2; my $time = $3; my $iface;
- if ($a =~ /IN\=(\w+)/) { $iface = $1; }
- if ($a =~ /OUT\=(\w+)/) { $out = $1; }
- if ($a =~ /SRC\=([\d\.]+)/) { $srcaddr = $1; }
- if ($a =~ /DST\=([\d\.]+)/) { $dstaddr = $1; }
+ # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise use IN and OUT
+ if ($a =~ /PHYSIN\=(\w+)/) { $iface = $1; } elsif ($a =~ /IN\=(\w+)/) { $iface = $1; }
+ if ($a =~ /PHYSOUT\=(\w+)/) { $out = $1; } elsif ($a =~ /OUT\=(\w+)/) { $out = $1; }
+ # Detect ipv4 and ipv6 addresses
+ if (($a =~ /SRC\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /SRC\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; }
+ if (($a =~ /DST\=(([\d]{1,3})(\.([\d]{1,3})){3})/) or ($a =~ /DST\=(([0-9a-fA-F]{0,4})(\:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; }
if ($a =~ /PROTO\=(\w+)/) { $protostr = $1; }
my $protostrlc = lc($protostr);
if ($a =~ /SPT\=([\d\.]+)/){ $srcport = $1; }