Development January 2024

development@lists.ipfire.org

12 participants
47 discussions

[PATCH 1/2] wsdd: Install wsdd - fixes bug13445
by Adolf Belka 01 Mar '24

01 Mar '24

- lfs and toorfile created for wsdd - wsdd added to make.sh script - created install/update/uninstall scripts for wsdd that create an unpriveleged user and group. - initscript created for wsdd. As wsdd is a python3 script, when it is run as a daemon the pidof command does not find any pid for wsdd. So a directory/file for a pid file was created. This is then passed to the loadproc and killproc commands. After the loadproc command has been created the pid is extracted from the ps aux command and put into the pid file. This then works when running the killproc command for it to know what to go and stop. The statusproc command does not have the ability to feed in the pid from a pid file and so it fails to find a running wsdd as it uses the pidof command. Code was added to the status section of the initscript to check if the pid file exists and if so to print the same command as used with the statusproc command, and also the same wording if the pid file does not exist because wsdd is not running. - info from the ethernet/settings file is used to identify if only green0 is available or if blue0 is also used and based on this the appropriate interface commands are added to the wsdd command. - wsdd is also set up to run in a chroot - Has been tested on my vm testbed, initially by editing the files on the vm clone. After everything confiremd to be working, the build was successfully carried out and the .ipfire package was copied to a new vm clone installed and shown to perform as expected. This test only confirms that wsdd is correctly installed and started. Shutsdown and restarts on reboot successfully. Confirmed from the ps aux info that wsdd has been started with the correct options. Thge testing can not evaluate if wsdd enables windows systems newer than version 7 top be able to detect the samba shares as I have no windows systems. Fixes: Bug13445 Tested-by: Adolf Belka <adolf.belka(a)ipfire.org> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/wsdd | 2 + lfs/wsdd | 89 ++++++++++++++++++++++++++++++++++ make.sh | 1 + src/initscripts/packages/wsdd | 63 ++++++++++++++++++++++++ src/paks/wsdd/install.sh | 40 +++++++++++++++ src/paks/wsdd/uninstall.sh | 30 ++++++++++++ src/paks/wsdd/update.sh | 27 +++++++++++ 7 files changed, 252 insertions(+) create mode 100644 config/rootfiles/packages/wsdd create mode 100644 lfs/wsdd create mode 100644 src/initscripts/packages/wsdd create mode 100644 src/paks/wsdd/install.sh create mode 100644 src/paks/wsdd/uninstall.sh create mode 100644 src/paks/wsdd/update.sh diff --git a/config/rootfiles/packages/wsdd b/config/rootfiles/packages/wsdd new file mode 100644 index 000000000..ce225043a --- /dev/null +++ b/config/rootfiles/packages/wsdd @@ -0,0 +1,2 @@ +etc/rc.d/init.d/wsdd +usr/bin/wsdd diff --git a/lfs/wsdd b/lfs/wsdd new file mode 100644 index 000000000..aa65e47ef --- /dev/null +++ b/lfs/wsdd @@ -0,0 +1,89 @@ +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see <http://www.gnu.org/licenses/>. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 0.7.1 +SUMMARY = A Web Service Discovery host daemon. + +THISAPP = wsdd-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = $(URL_IPFIRE) +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = wsdd +PAK_VER = 1 + +DEPS = + +SERVICES = wsdd + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_BLAKE2 = ce43022c3bd9f7ff1fd7169ac0d5ab6b2ff78d35c221c05b2e20908a5772d563ab2aca571d4e6ae48a55d19d4adcb9cde60f720ae47af8ee950198224fcfdb26 + +install : $(TARGET) + +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download :$(patsubst %,$(DIR_DL)/%,$(objects)) + +b2 : $(subst %,%_BLAKE2,$(objects)) + +dist: + @$(PAK) + +############################################################################### +# Downloading, checking, b2sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_BLAKE2,$(objects)) : + @$(B2SUM) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && cp src/wsdd.py /usr/bin/wsdd + + #install initscripts + $(call INSTALL_INITSCRIPTS,$(SERVICES)) + + @rm -rf $(DIR_APP) + @$(POSTBUILD) diff --git a/make.sh b/make.sh index 06e09c9a3..5af3dedc3 100755 --- a/make.sh +++ b/make.sh @@ -1699,6 +1699,7 @@ buildipfire() { lfsmake2 perl-MIME-Base32 lfsmake2 perl-URI-Encode lfsmake2 rsnapshot + lfsmake2 wsdd # Kernelbuild ... current we have no platform that need # multi kernel builds so KCFG is empty diff --git a/src/initscripts/packages/wsdd b/src/initscripts/packages/wsdd new file mode 100644 index 000000000..c5207f872 --- /dev/null +++ b/src/initscripts/packages/wsdd @@ -0,0 +1,63 @@ +#!/bin/sh +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see <http://www.gnu.org/licenses/>. # +# # +############################################################################### + +. /etc/sysconfig/rc +. $rc_functions + +eval $(/usr/local/bin/readhash /var/ipfire/ethernet/settings) + +# Create chroot directory for wsdd +mkdir -p /var/run/wsdd + +INTERFACES="-i ${GREEN_DEV}" + if [ -n "${BLUE_DEV}" ]; then + INTERFACES="${INTERFACES} -i ${BLUE_DEV}" + fi +WSDD_WORKGROUP="-w $(/usr/bin/testparm -s --parameter-name workgroup 2>/dev/null)" +WSDD_USER="-u wsdd:wsdd" +WSDD_CHROOT="-c /var/run/wsdd" + +case "$1" in + start) + boot_mesg "Starting wsdd daemon..." + loadproc -b /usr/bin/wsdd -4 ${WSDD_USER} ${INTERFACES} ${WSDD_WORKGROUP} ${WSDD_CHROOT} + sleep 1 + echo $(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print $2}') > /var/run/wsdd/pid + ;; + stop) + boot_mesg "Stopping wsdd daemon..." + killproc -p /var/run/wsdd/pid /usr/bin/wsdd + ;; + status) + WSDD_PID=$(ps aux | grep "/usr/bin/wsdd" | grep -v grep | awk '{print $2}') + if [ -n "${WSDD_PID}" ]; then + echo -e "\\033[1;36m /usr/bin/wsdd is running with Process"\ + "ID(s) $WSDD_PID.\\033[0;39m" + else + echo -e "\\033[1;36m /usr/bin/wsdd is not running.\\033[0;39m" + fi + ;; + *) + echo "Usage: $0 (start|stop|status)" + exit 1 + ;; +esac + diff --git a/src/paks/wsdd/install.sh b/src/paks/wsdd/install.sh new file mode 100644 index 000000000..181b84eb9 --- /dev/null +++ b/src/paks/wsdd/install.sh @@ -0,0 +1,40 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh + +# If the wsdd user does not exist yet, then create it and add to wsdd group. +if ! getent user wsdd >/dev/null; then + useradd -r -U -d / -s /bin/false -c "wsdd user" wsdd + usermod -a -G wsdd wsdd +fi + +extract_files +restore_backup ${NAME} + +# Create startlinks +ln -sf ../init.d/wsdd /etc/rc.d/rc0.d/K35wsdd +ln -sf ../init.d/wsdd /etc/rc.d/rc3.d/S65wsdd +ln -sf ../init.d/wsdd /etc/rc.d/rc6.d/K35wsdd +start_service ${NAME} +exit 0 diff --git a/src/paks/wsdd/uninstall.sh b/src/paks/wsdd/uninstall.sh new file mode 100644 index 000000000..4c52ee281 --- /dev/null +++ b/src/paks/wsdd/uninstall.sh @@ -0,0 +1,30 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +stop_service ${NAME} +make_backup ${NAME} +remove_files +# Remove all start links. +rm -rf /etc/rc.d/rc*.d/*wsdd +exit 0 diff --git a/src/paks/wsdd/update.sh b/src/paks/wsdd/update.sh new file mode 100644 index 000000000..99776659c --- /dev/null +++ b/src/paks/wsdd/update.sh @@ -0,0 +1,27 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_backup_includes +./uninstall.sh +./install.sh -- 2.43.0

3 13

[PATCH] collectd: Do not sync
by Michael Tremer 01 Feb '24

01 Feb '24

Calling a global sync operation manually is generally a bad idea as it can block for forever. If people have storage that does not retain anything that is being written to it, they need to fix their hardware. Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> --- src/initscripts/system/collectd | 3 --- 1 file changed, 3 deletions(-) diff --git a/src/initscripts/system/collectd b/src/initscripts/system/collectd index bb8a2f54f..56b799d56 100644 --- a/src/initscripts/system/collectd +++ b/src/initscripts/system/collectd @@ -146,9 +146,6 @@ case "$1" in sed -i -e "s|^#LoadPlugin swap|LoadPlugin swap|g" /etc/collectd.conf fi - # sync after config update... - sync - if [ $(date +%Y) -gt 2011 ]; then boot_mesg "Starting Collection daemon..." /usr/sbin/collectd -C /etc/collectd.conf -- 2.39.2

2 4

Fwd: [FAILED] Nightly Build of next (897fecc) for riscv64 on riscv64-01.haj.ipfire.org
by Michael Tremer 01 Feb '24

01 Feb '24

Hello, Does anyone have an idea why this broke? Did we change anything that would affect this package? The build before seems to have gone past this… -Michael > Begin forwarded message: > > From: IPFire Nightly Builder <nightly-builds(a)ipfire.org> > Subject: [FAILED] Nightly Build of next (897fecc) for riscv64 on riscv64-01.haj.ipfire.org > Date: 28 January 2024 at 10:34:49 GMT > To: Nightly Builds List <nightly-builds(a)lists.ipfire.org> > > https://nightly.ipfire.org/next/2024-01-25%2010%3A23%3A03%20%2B0000-897fecc… > > commit 897fecc8df3a09195ed26a2bdf5d4607f492eafd > Author: Adolf Belka <adolf.belka(a)ipfire.org> > Date: Wed Jan 24 22:09:44 2024 +0100 > > abseil-cpp: New build dependency for protobuf > > - abseil-cpp required to build protobuf which is required for protobuf-c which is new > build dependency for frr > > Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> > Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> > > https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=897fecc8df3a09195ed26… > > Packaged toolchain compilation > Checking for necessary space on disk [ DONE ] > Set cache size limit to 4.0 GB > Building LFS > stage2 [ 25 ][ DONE ] > linux (6.6.13) KCFG=-headers [ 8:03 ][ DONE ] > man-pages (5.13) [ 2:10 ][ DONE ] > glibc (2.38) [ 36:49 ][ DONE ] > tzdata (2023d) [ 1:19 ][ DONE ] > cleanup-toolchain [ 2 ][ DONE ] > zlib (1.3) [ 25 ][ DONE ] > gcc (13.2.0) PASS=A [ 3:09 ][ DONE ] > zstd (1.5.5) [ 34 ][ DONE ] > autoconf (2.71) [ 29 ][ DONE ] > automake (1.16.5) [ 47 ][ DONE ] > help2man (1.49.2) [ 16 ][ DONE ] > libtool (2.4.7) [ 2:23 ][ DONE ] > binutils (2.41) [ 11:40 ][ DONE ] > gmp (6.3.0) [ 7:06 ][ DONE ] > mpfr (4.2.1) [ 3:51 ][ DONE ] > libmpc (1.3.1) [ 1:40 ][ DONE ] > libxcrypt (4.4.36) [ 2:42 ][ DONE ] > file (5.44) [ 2:48 ][ DONE ] > gcc (13.2.0) [ 57:06 ][ DONE ] > attr (2.5.2) [ 1:31 ][ DONE ] > acl (2.3.1) [ 3:00 ][ DONE ] > sed (4.9) [ 7:51 ][ DONE ] > berkeley (5.3.28) [ 8:43 ][ DONE ] > coreutils (9.0) [ 37:07 ][ DONE ] > iana-etc (20231026) [ 3 ][ DONE ] > m4 (1.4.19) [ 11:02 ][ DONE ] > bison (3.8.2) [ 10:39 ][ DONE ] > ncurses (6.4) [ 8:52 ][ DONE ] > perl (5.36.0) [ 35:55 ][ DONE ] > readline (8.2) [ 2:20 ][ DONE ] > bzip2 (1.0.8) [ 20 ][ DONE ] > xz (5.4.5) [ 3:45 ][ DONE ] > lzip (1.23) [ 5 ][ DONE ] > pcre (8.45) [ 2:08 ][ DONE ] > pcre2 (10.42) [ 1:46 ][ DONE ] > gettext (0.22) [ 52:29 ][ DONE ] > bash (5.2) [ 8:25 ][ DONE ] > diffutils (3.9) [ 8:04 ][ DONE ] > ed (1.19) [ 5 ][ DONE ] > findutils (4.9.0) [ 12:50 ][ DONE ] > flex (2.6.4) [ 2:36 ][ DONE ] > gawk (5.3.0) [ 4:58 ][ DONE ] > go (1.20.4) [ 0 ][ SKIP ] > grep (3.11) [ 8:26 ][ DONE ] > groff (1.23.0) [ 10:18 ][ DONE ] > gperf (3.1) [ 1:05 ][ DONE ] > gzip (1.13) [ 6:02 ][ DONE ] > hostname (3.20) [ 3 ][ DONE ] > whois (5.5.18) [ 8 ][ DONE ] > kbd (2.5.1) [ 4:00 ][ DONE ] > less (633) [ 1:42 ][ DONE ] > pkg-config (0.29.2) [ 7:50 ][ DONE ] > procps (v4.0.4) [ 4:14 ][ DONE ] > make (4.4.1) [ 3:57 ][ DONE ] > libpipeline (1.5.7) [ 5:57 ][ DONE ] > man (2.12.0) [ 15:11 ][ DONE ] > net-tools (2.10) [ 21 ][ DONE ] > patch (2.7.6) [ 7:22 ][ DONE ] > psmisc (23.6) [ 2:15 ][ DONE ] > shadow (4.14.3) [ 3:38 ][ DONE ] > sysklogd (1.5.1) [ 5 ][ DONE ] > sysvinit (3.08) [ 35 ][ DONE ] > tar (1.35) [ 11:17 ][ DONE ] > texinfo (7.1) [ 9:08 ][ DONE ] > util-linux (2.39.2) [ 7:52 ][ DONE ] > vim (9.0) [ 6:18 ][ DONE ] > e2fsprogs (1.46.5) [ 5:14 ][ DONE ] > jq (1.7) [ 3:21 ][ DONE ] > Building IPFire > configroot [ 25 ][ DONE ] > initscripts [ 32 ][ DONE ] > backup [ 3 ][ DONE ] > rust (1.67.0) [ 1:56 ][ DONE ] > openssl (3.2.0) [ 55:25 ][ DONE ] > popt (1.19) [ 1:26 ][ DONE ] > libedit (20230828-3.1) [ 2:12 ][ DONE ] > pam (1.6.0) [ 10:23 ][ DONE ] > libcap (2.69) [ 51 ][ DONE ] > libcap-ng (0.8.3) [ 1:23 ][ DONE ] > libpcap (1.10.4) [ 2:25 ][ DONE ] > ppp (2.5.0) [ 4:09 ][ DONE ] > pptp (1.10.0) [ 4 ][ DONE ] > unzip (60) [ 36 ][ DONE ] > which (2.21) [ 1:08 ][ DONE ] > bc (1.07.1) [ 1:19 ][ DONE ] > cpio (2.14) [ 8:31 ][ DONE ] > libaio (0.3.113) [ 5 ][ DONE ] > freetype (2.13.2) [ 1:18 ][ DONE ] > libmnl (1.0.5) [ 1:05 ][ DONE ] > libnfnetlink (1.0.2) [ 1:00 ][ DONE ] > libnetfilter_queue (1.0.5) [ 1:02 ][ DONE ] > libnetfilter_conntrack (1.0.9) [ 1:21 ][ DONE ] > libnetfilter_cthelper (1.0.1) [ 59 ][ DONE ] > libnetfilter_cttimeout (1.0.1) [ 1:00 ][ DONE ] > iptables (1.8.10) [ 2:02 ][ DONE ] > iproute2 (6.7.0) [ 50 ][ DONE ] > screen (4.9.0) [ 2:09 ][ DONE ] > elfutils (0.190) [ 3:24 ][ DONE ] > expat (2.5.0) [ 1:47 ][ DONE ] > libconfig (1.7.3) [ 2:43 ][ DONE ] > curl (8.2.1) [ 8:07 ][ DONE ] > libarchive (3.7.0) [ 9:01 ][ DONE ] > cmake (3.25.2) [ 9:26 ][ DONE ] > json-c (0.17) [ 2:49 ][ DONE ] > tcl (8.6.13) [ 11:59 ][ DONE ] > libffi (3.4.4) [ 1:56 ][ DONE ] > gdbm (1.23) [ 3:35 ][ DONE ] > sqlite (3450000) [ 1:32 ][ DONE ] > python3 (3.10.8) [ 18:43 ][ DONE ] > python3-setuptools (67.5.1) [ 1:08 ][ DONE ] > python3-MarkupSafe (2.1.3) [ 14 ][ DONE ] > python3-Jinja2 (3.1.2) [ 21 ][ DONE ] > ninja (1.11.1) [ 33 ][ DONE ] > meson (1.3.1) [ 43 ][ DONE ] > kmod (31) [ 2:31 ][ DONE ] > udev (254) [ 5:58 ][ DONE ] > libusb (1.0.26) [ 1:36 ][ DONE ] > mdadm (4.2) [ 30 ][ DONE ] > dracut (056) [ 44 ][ DONE ] > lvm2 (2.03.23) [ 3:55 ][ DONE ] > multipath-tools (0.8.9) [ 12 ][ DONE ] > glib (2.77.0) [ 6:44 ][ DONE ] > libgudev (238) [ 33 ][ DONE ] > libgpg-error (1.47) [ 3:32 ][ DONE ] > libgcrypt (1.10.3) [ 4:08 ][ DONE ] > libassuan (2.5.5) [ 2:26 ][ DONE ] > nettle (3.9) [ 2:07 ][ DONE ] > libsodium (1.0.19) [ 4:02 ][ DONE ] > libevent2 (2.1.12-stable) [ 4:14 ][ DONE ] > apr (1.7.4) [ 6:57 ][ DONE ] > aprutil (1.6.3) [ 1:19 ][ DONE ] > unbound (1.19.0) [ 6:40 ][ DONE ] > gnutls (3.8.3) [ 16:41 ][ DONE ] > libuv (1.44.2) [ 2:20 ][ DONE ] > bind (9.16.45) [ 11:17 ][ DONE ] > dhcp (4.4.3-P1) [ 9:27 ][ DONE ] > dhcpcd (10.0.4) [ 47 ][ DONE ] > boost (1_83_0) [ 38:31 ][ DONE ] > linux-atm (2.4.1) [ 2:34 ][ DONE ] > libqmi (1.30.8) [ 3:42 ][ DONE ] > c-ares (1.17.1) [ 26:47 ][ DONE ] > rust-dissimilar (1.0.3) [ 27 ][ DONE ] > rust-cfg-if (1.0.0) [ 8 ][ DONE ] > rust-libc (0.2.108) [ 43 ][ DONE ] > rust-getrandom (0.2.4) [ 40 ][ DONE ] > rust-typenum (1.15.0) [ 40 ][ DONE ] > rust-version-check (0.9.4) [ 26 ][ DONE ] > rust-generic-array (0.14.4) [ 1:13 ][ DONE ] > rust-crypto-common (0.1.1) [ 1:16 ][ DONE ] > rust-cipher (0.3.0) [ 1:18 ][ DONE ] > rust-hex (0.4.3) [ 16 ][ DONE ] > rust-unicode-xid (0.2.1) [ 10 ][ DONE ] > rust-proc-macro2 (1.0.36) [ 1:04 ][ DONE ] > rust-quote (1.0.15) [ 1:22 ][ DONE ] > rust-syn (1.0.86) [ 4:08 ][ DONE ] > rust-home (0.5.3) [ 11 ][ DONE ] > rust-lazy-static (1.4.0) [ 10 ][ DONE ] > rust-memchr (2.4.1) [ 36 ][ DONE ] > rust-aho-corasick (0.7.18) [ 1:12 ][ DONE ] > rust-regex-syntax (0.6.25) [ 2:19 ][ DONE ] > rust-regex (1.5.3) [ 7:15 ][ DONE ] > rust-ucd-trie (0.1.3) [ 20 ][ DONE ] > rust-pest (2.1.3) [ 43 ][ DONE ] > rust-semver-parser (0.7.0) [ 22 ][ DONE ] > rust-semver (0.9.0) [ 38 ][ DONE ] > rust-same-file (1.0.6) [ 12 ][ DONE ] > rust-walkdir (2.3.2) [ 29 ][ DONE ] > rust-dirs (1.0.5) [ 40 ][ DONE ] > rust-toolchain_find (0.1.4) [ 7:44 ][ DONE ] > rust-serde (1.0.136) [ 1:27 ][ DONE ] > rust-itoa (1.0.1) [ 10 ][ DONE ] > rust-ryu (1.0.9) [ 17 ][ DONE ] > rust-serde_json (1.0.78) [ 2:37 ][ DONE ] > rust-synstructure (0.12.6) [ 5:22 ][ DONE ] > rust-block-buffer (0.9.0) [ 1:16 ][ DONE ] > rust-digest (0.9.0) [ 1:16 ][ DONE ] > rust-ppv-lite86 (0.2.16) [ 16 ][ DONE ] > rust-rand_core (0.6.3) [ 12 ][ DONE ] > rust-rand_core-0.4.2 (0.4.2) [ 13 ][ DONE ] > rust-rand_core-0.3.1 (0.3.1) [ 15 ][ DONE ] > rust-rand_chacha (0.3.1) [ 56 ][ DONE ] > rust-rand_hc (0.3.1) [ 22 ][ DONE ] > rust-rand (0.8.4) [ 1:58 ][ DONE ] > rust-rdrand (0.4.0) [ 16 ][ DONE ] > rust-rand-0.4 (0.4.6) [ 56 ][ DONE ] > rust-log (0.4.14) [ 22 ][ DONE ] > rust-num_cpus (1.13.1) [ 52 ][ DONE ] > rust-crossbeam-utils (0.8.6) [ 31 ][ DONE ] > rust-autocfg (1.0.1) [ 27 ][ DONE ] > rust-memoffset (0.6.5) [ 35 ][ DONE ] > rust-scopeguard (1.1.0) [ 10 ][ DONE ] > rust-crossbeam-epoch (0.9.6) [ 1:19 ][ DONE ] > rust-crossbeam-deque (0.8.1) [ 1:23 ][ DONE ] > rust-either (1.6.1) [ 10 ][ DONE ] > rust-crossbeam-channel (0.5.2) [ 49 ][ DONE ] > rust-rayon-core (1.9.1) [ 3:00 ][ DONE ] > rust-rayon (1.5.1) [ 4:03 ][ DONE ] > rust-remove_dir_all (0.5.3) [ 8 ][ DONE ] > rust-tempdir (0.3.7) [ 1:03 ][ DONE ] > rust-glob (0.3.0) [ 30 ][ DONE ] > rust-once_cell (1.9.0) [ 14 ][ DONE ] > rust-termcolor (1.1.2) [ 19 ][ DONE ] > rust-toml (0.5.8) [ 2:51 ][ DONE ] > rust-serde_derive (1.0.136) [ 8:13 ][ DONE ] > rust-trybuild (1.0.54) [ 17:56 ][ DONE ] > rust-unindent (0.1.7) [ 15 ][ DONE ] > rust-proc-macro-hack (0.5.19) [ 1:00 ][ DONE ] > rust-indoc-impl (0.3.6) [ 5:26 ][ DONE ] > rust-indoc (1.0.3) [ 39 ][ DONE ] > rust-indoc-0.3.6 (0.3.6) [ 5:24 ][ DONE ] > rust-instant (0.1.12) [ 11 ][ DONE ] > rust-lock_api (0.4.5) [ 16 ][ DONE ] > rust-smallvec (1.8.0) [ 13 ][ DONE ] > rust-parking_lot_core (0.8.5) [ 57 ][ DONE ] > rust-parking_lot (0.11.2) [ 1:26 ][ DONE ] > rust-paste-impl (0.1.18) [ 1:34 ][ DONE ] > rust-paste (1.0.3) [ 36 ][ DONE ] > rust-paste-0.1.18 (0.1.18) [ 1:35 ][ DONE ] > rust-ctor (0.1.21) [ 6:37 ][ DONE ] > rust-ghost (0.1.2) [ 4:45 ][ DONE ] > rust-inventory-impl (0.1.4) [ 4:28 ][ DONE ] > rust-inventory (0.1.4) [ 8:19 ][ DONE ] > rust-pyo3-build-config (0.15.2) [ 1:51 ][ DONE ] > rust-pyo3-macros-backend (0.15.2) [ 11:57 ][ DONE ] > rust-pyo3-macros (0.15.2) [ 13:23 ][ DONE ] > rust-pyo3 (0.15.2) [ 19:02 ][ DONE ] > rust-num-traits (0.2.15) [ 1:08 ][ DONE ] > rust-num-integer (0.1.45) [ 1:27 ][ DONE ] > rust-num_threads (0.1.5) [ 14 ][ DONE ] > rust-time (0.1.43) [ 49 ][ DONE ] > rust-iana-time-zone (0.1.51) [ 15 ][ DONE ] > rust-chrono (0.4.22) [ 3:22 ][ DONE ] > rust-asn1_derive (0.12.2) [ 5:12 ][ DONE ] > rust-asn1 (0.12.2) [ 7:41 ][ DONE ] > rust-proc-macro-error-attr (1.0.4) [ 2:11 ][ DONE ] > rust-proc-macro-error (1.0.4) [ 4:16 ][ DONE ] > rust-Inflector (0.11.4) [ 6:22 ][ DONE ] > rust-ouroboros_macro (0.15.5) [ 9:38 ][ DONE ] > rust-aliasable (0.1.3) [ 10 ][ DONE ] > rust-stable_deref_trait (1.2.0) [ 9 ][ DONE ] > rust-ouroboros (0.15.5) [ 9:43 ][ DONE ] > rust-base64 (0.13.0) [ 18 ][ DONE ] > rust-pem (1.1.0) [ 34 ][ DONE ] > gdb (13.2) [ 17:27 ][ DONE ] > grub (2.12) [ 17:03 ][ DONE ] > mandoc (1.14.6) [ 1:02 ][ DONE ] > efivar (38) [ 23 ][ DONE ] > efibootmgr (18) [ 9 ][ DONE ] > libtasn1 (4.19.0) [ 4:48 ][ DONE ] > p11-kit (0.25.3) [ 3:25 ][ DONE ] > ca-certificates (20231204) [ 1:13 ][ DONE ] > fireinfo (2.2.0) [ 2:05 ][ DONE ] > libnet (1.1.6) [ 1:36 ][ DONE ] > libnl-3 (3.9.0) [ 3:01 ][ DONE ] > libidn (1.42) [ 4:52 ][ DONE ] > nasm (2.15.05) [ 3:49 ][ DONE ] > libjpeg (2.1.4) [ 59 ][ DONE ] > openjpeg (2.5.0) [ 1:07 ][ DONE ] > libexif (0.6.24) [ 1:35 ][ DONE ] > libpng (1.6.39) [ 1:10 ][ DONE ] > libtiff (4.5.1) [ 4:10 ][ DONE ] > gd (2.3.3) [ 2:06 ][ DONE ] > slang (2.3.3) [ 6:24 ][ DONE ] > newt (0.52.23) [ 47 ][ DONE ] > libsmooth [ 1:42 ][ DONE ] > pciutils (3.10.0) [ 8 ][ DONE ] > usbutils (017) [ 2:44 ][ DONE ] > libxml2 (2.12.3) [ 1:55 ][ DONE ] > libxslt (1.1.37) [ 2:09 ][ DONE ] > perl-BerkeleyDB (0.63) [ 20 ][ DONE ] > cyrus-sasl (2.1.26) [ 6:14 ][ DONE ] > openldap (2.6.5) [ 13:19 ][ DONE ] > apache2 (2.4.58) [ 10:55 ][ DONE ] > web-user-interface [ 53 ][ DONE ] > flag-icons (2.6) [ 16 ][ DONE ] > jquery (3.6.3) [ 3 ][ DONE ] > bootstrap (4.0.0-alpha.6) [ 6 ][ DONE ] > arping (2.23) [ 1:43 ][ DONE ] > beep (1.3) [ 8 ][ DONE ] > libssh (0.10.6) [ 4:11 ][ DONE ] > libinih (56) [ 27 ][ DONE ] > cdrkit (1.1.11) [ 2:51 ][ DONE ] > dosfstools (4.2) [ 1:09 ][ DONE ] > exfatprogs (1.1.3) [ 1:09 ][ DONE ] > reiserfsprogs (3.6.27) [ 2:51 ][ DONE ] > liburcu (0.14.0) [ 3:57 ][ DONE ] > xfsprogs (6.5.0) [ 8:33 ][ DONE ] > sysfsutils (2.1.1) [ 2:11 ][ DONE ] > fuse (3.15.0) [ 53 ][ DONE ] > ntfs-3g (2022.10.3) [ 3:16 ][ DONE ] > ethtool (6.3) [ 40 ][ DONE ] > fcron (3.2.1) [ 2:31 ][ DONE ] > perl-ExtUtils-PkgConfig (1.16) [ 11 ][ DONE ] > perl-GD (2.73) [ 25 ][ DONE ] > perl-GD-Graph (1.54) [ 14 ][ DONE ] > perl-GD-TextUtil (0.86) [ 12 ][ DONE ] > perl-Device-SerialPort (1.000002) [ 2:20 ][ DONE ] > perl-Device-Modem (1.56) [ 12 ][ DONE ] > perl-Apache-Htpasswd (1.9) [ 11 ][ DONE ] > perl-Parse-Yapp (1.21) [ 15 ][ DONE ] > perl-Data-UUID (1.224) [ 15 ][ DONE ] > perl-Try-Tiny (0.31) [ 12 ][ DONE ] > perl-HTTP-Message (6.36) [ 14 ][ DONE ] > perl-HTTP-Date (6.05) [ 11 ][ DONE ] > gnupg (1.4.23) [ 5:20 ][ DONE ] > hdparm (9.65) [ 6 ][ DONE ] > whatmask (1.2) [ 34 ][ DONE ] > libtirpc (1.3.3) [ 1:23 ][ DONE ] > conntrack-tools (1.4.7) [ 1:48 ][ DONE ] > iputils (20240117) [ 43 ][ DONE ] > l7-protocols (2009-05-10) [ 17 ][ DONE ] > hwdata [ 3 ][ DONE ] > logrotate (3.21.0) [ 1:14 ][ DONE ] > logwatch (7.8) [ 34 ][ DONE ] > misc-progs [ 29 ][ DONE ] > nano (7.2) [ 7:48 ][ DONE ] > perl-URI (5.09) [ 20 ][ DONE ] > perl-CGI (4.54) [ 15 ][ DONE ] > perl-Switch (2.17) [ 11 ][ DONE ] > perl-HTML-Tagset (3.04) [ 11 ][ DONE ] > perl-HTML-Parser (3.78) [ 17 ][ DONE ] > perl-HTML-Template (2.94) [ 12 ][ DONE ] > perl-Compress-Zlib (1.35) [ 17 ][ DONE ] > perl-Digest (1.19) [ 11 ][ DONE ] > perl-Digest-SHA1 (2.13) [ 15 ][ DONE ] > perl-Digest-HMAC (1.03) [ 13 ][ DONE ] > perl-libwww (6.62) [ 17 ][ DONE ] > perl-LWP-Protocol-https (6.10) [ 11 ][ DONE ] > perl-Net-HTTP (6.22) [ 13 ][ DONE ] > perl-Net-DNS (1.30) [ 35 ][ DONE ] > perl-Net-IPv4Addr (0.10) [ 14 ][ DONE ] > perl-Net_SSLeay (1.88) [ 43 ][ DONE ] > perl-IO-Stringy (2.110) [ 16 ][ DONE ] > perl-IO-Socket-SSL (2.066) [ 17 ][ DONE ] > perl-Unix-Syslog (1.1) [ 16 ][ DONE ] > perl-Mail-Tools (2.07) [ 17 ][ DONE ] > perl-MIME-Tools (5.509) [ 19 ][ DONE ] > perl-Net-Server (0.97) [ 18 ][ DONE ] > perl-Canary-Stability (2013) [ 11 ][ DONE ] > perl-Convert-TNEF (0.18) [ 11 ][ DONE ] > perl-Convert-UUlib (1.8) [ 51 ][ DONE ] > perl-Archive-Tar (1.29) [ 15 ][ DONE ] > perl-Archive-Zip (1.16) [ 14 ][ DONE ] > perl-Text-Tabs+Wrap (2013.0523) [ 14 ][ DONE ] > perl-XML-Parser (2.46) [ 25 ][ DONE ] > perl-Crypt-PasswdMD5 (1.41) [ 10 ][ DONE ] > perl-Net-Telnet (3.03) [ 11 ][ DONE ] > perl-JSON (4.05) [ 13 ][ DONE ] > python3-inotify (0.2.10) [ 10 ][ DONE ] > python3-docutils (0.19) [ 48 ][ DONE ] > python3-daemon (2.3.1) [ 15 ][ DONE ] > ntp (4.2.8p17) [ 15:16 ][ DONE ] > openssh (9.6p1) [ 11:41 ][ DONE ] > fontconfig (2.15.0) [ 3:46 ][ DONE ] > dejavu-fonts-ttf (2.37) [ 8 ][ DONE ] > ubuntu-font-family (0.83) [ 5 ][ DONE ] > freefont (20100919) [ 6 ][ DONE ] > pixman (0.43.0) [ 1:01 ][ DONE ] > cairo (1.17.6) [ 2:43 ][ DONE ] > harfbuzz (8.2.2) [ 3:19 ][ DONE ] > fribidi (1.0.12) [ 45 ][ DONE ] > pango (1.50.13) [ 1:37 ][ DONE ] > rrdtool (1.8.0) [ 5:24 ][ DONE ] > setup [ 2:41 ][ DONE ] > jansson (2.14) [ 1:35 ][ DONE ] > yaml (0.2.5) [ 59 ][ DONE ] > libhtp (0.5.44) [ 2:27 ][ DONE ] > colm (0.14.7) [ 3:52 ][ DONE ] > ragel (7.0.4) [ 3:11 ][ DONE ] > hyperscan (5.4.0) [ 0 ][ SKIP ] > suricata (6.0.15) [ 33:28 ][ DONE ] > ids-ruleset-sources [ 4 ][ DONE ] > ipblocklist-sources [ 3 ][ DONE ] > squid (6.6) [ 29:42 ][ DONE ] > squidguard (1.6.0) [ 1:42 ][ DONE ] > calamaris (2.59) [ 4 ][ DONE ] > tcpdump (4.99.4) [ 2:03 ][ DONE ] > traceroute (2.1.2) [ 7 ][ DONE ] > vlan (1.9) [ 5 ][ DONE ] > wireless (30.pre9) [ 9 ][ DONE ] > pakfire (0.99) [ 6 ][ DONE ] > lz4 (1.9.4) [ 2:01 ][ DONE ] > lzo (2.10) [ 3:39 ][ DONE ] > openvpn (2.5.9) [ 6:33 ][ DONE ] > mpage (2.5.7) [ 5 ][ DONE ] > dbus (1.14.10) [ 5:08 ][ DONE ] > intltool (0.51.0) [ 16 ][ DONE ] > libdaemon (0.14) [ 2:00 ][ DONE ] > avahi (0.8) [ 5:51 ][ DONE ] > cups (2.4.6) [ 9:59 ][ DONE ] > lcms2 (2.16) [ 2:05 ][ DONE ] > ghostscript (10.02.1) [ 6:31 ][ DONE ] > qpdf (11.7.0) [ 2:30 ][ DONE ] > poppler (24.01.0) [ 2:25 ][ DONE ] > poppler-data (0.4.12) [ 37 ][ DONE ] > cups-filters (1.28.16) [ 2:49 ][ DONE ] > epson-inkjet-printer-escpr (1.7.23) [ 2:22 ][ DONE ] > cups-pdf (3.0.1) [ 13 ][ DONE ] > foomatic (4.0.13) [ 36:38 ][ DONE ] > hplip (3.23.5) [ 4:04 ][ DONE ] > cifs-utils (7.0) [ 2:03 ][ DONE ] > krb5 (1.21.2) [ 8:46 ][ DONE ] > rpcsvc-proto (1.4.4) [ 51 ][ DONE ] > samba (4.19.3) [ 51:01 ][ DONE ] > netatalk (3.1.12) [ 7:18 ][ DONE ] > sudo (1.9.15p5) [ 8:11 ][ DONE ] > mc (4.8.30) [ 7:06 ][ DONE ] > wget (1.21.4) [ 11:19 ][ DONE ] > bridge-utils (1.5) [ 44 ][ DONE ] > smartmontools (7.4) [ 1:22 ][ DONE ] > htop (3.3.0) [ 2:23 ][ DONE ] > chkconfig (1.5) [ 5 ][ DONE ] > postfix (3.8.4) [ 2:25 ][ DONE ] > fetchmail (6.4.36) [ 2:22 ][ DONE ] > clamav (1.2.1) [ 12:18 ][ DONE ] > perl-NetAddr-IP (4.079) [ 1:32 ][ DONE ] > dma (0.13) [ 19 ][ DONE ] > alsa (1.2.10) [ 9:15 ][ DONE ] > mpfire [ 9 ][ DONE ] > guardian (2.0.2) [ 11 ][ DONE ] > libid3tag (0.15.1b) [ 1:29 ][ DONE ] > libmad (0.15.1b) [ 2:50 ][ DONE ] > libogg (1.3.5) [ 1:30 ][ DONE ] > libvorbis (1.3.7) [ 1:39 ][ DONE ] > flac (1.4.2) [ 3:39 ][ DONE ] > lame (3.100) [ 2:47 ][ DONE ] > soxr (0.1.3) [ 53 ][ DONE ] > libshout (2.4.6) [ 2:07 ][ DONE ] > xvid (1.3.7) [ 46 ][ DONE ] > libmpeg2 (0.4.1) [ 2:37 ][ DONE ] > gnump3d (3.0) [ 1:01 ][ DONE ] > rsync (3.2.7) [ 4:58 ][ DONE ] > rpcbind (1.2.6) [ 32 ][ DONE ] > keyutils (1.6.3) [ 14 ][ DONE ] > nfs (2.6.4) [ 5:50 ][ DONE ] > ncat (7.94) [ 10:22 ][ DONE ] > nmap (7.94) [ 12:20 ][ DONE ] > etherwake (1.09) [ 7 ][ DONE ] > bwm-ng (0.6.1-f54b3fa) [ 2:06 ][ DONE ] > sysstat (12.7.1) [ 1:05 ][ DONE ] > strongswan (5.9.13) [ 13:37 ][ DONE ] > rng-tools (6.16) [ 1:17 ][ DONE ] > lsof (4.99.3) [ 12 ][ DONE ] > br2684ctl [ 7 ][ DONE ] > lm_sensors (3-6-0) [ 13 ][ DONE ] > libstatgrab (0.92.1) [ 5:15 ][ DONE ] > liboping (1.3.4) [ 1:33 ][ DONE ] > collectd (4.10.9) [ 23:52 ][ DONE ] > git (2.43.0) [ 3:20 ][ DONE ] > linux-firmware (20231030) [ 13:57 ][ DONE ] > dvb-firmwares (20141125) [ 7 ][ DONE ] > zd1211-firmware (1.5) [ 5 ][ DONE ] > rpi-firmware (20211127) [ 0 ][ SKIP ] > intel-microcode (20231114) [ 0 ][ SKIP ] > pcengines-apu-firmware (4.19.0.1) [ 0 ][ SKIP ] > elinks (0.16.0) [ 2:37 ][ DONE ] > igmpproxy (0.4) [ 34 ][ DONE ] > opus (1.4) [ 1:38 ][ DONE ] > python3-toml (0.10.2) [ 13 ][ DONE ] > python3-pyproject2setuppy (22) [ 15 ][ DONE ] > python3-pyparsing (3.0.9) [ 17 ][ DONE ] > spice-protocol (0.14.3) [ 15 ][ DONE ] > spice (0.15.0) [ 6:32 ][ DONE ] > sdl2 (2.28.5) [ 5:22 ][ DONE ] > libusbredir (0.13.0) [ 36 ][ DONE ] > libseccomp (2.5.5) [ 1:13 ][ DONE ] > libslirp (4.7.0) [ 27 ][ DONE ] > qemu (8.1.2) [ 17:16 ][ DONE ] > netsnmpd (5.9.1) [ 53:10 ][ DONE ] > nagios_nrpe (4.1.0) [ 7:30 ][ DONE ] > nagios-plugins (2.3.3) [ 11:51 ][ DONE ] > icinga (1.11.4) [ 9:49 ][ DONE ] > observium-agent (23.1) [ 27 ][ DONE ] > ebtables (2.0.11) [ 1:12 ][ DONE ] > faad2 (2_10_0) [ 2:50 ][ DONE ] > alac (0.0.7) [ 2:15 ][ DONE ] > ffmpeg (6.0) [ 7:35 ][ DONE ] > vdr (2.4.7) [ 57 ][ DONE ] > vdr_streamdev (0.6.1) [ 49 ][ DONE ] > vdr_epgsearch (2.4.0+git20191101) [ 2:44 ][ DONE ] > vdr_dvbapi (2.2.5) [ 22 ][ DONE ] > vdr_eepg (master) [ 13 ][ DONE ] > w_scan (20170107) [ 47 ][ DONE ] > fmt (10.2.1) [ 48 ][ DONE ] > mpd (0.23.14) [ 2:06 ][ DONE ] > libmpdclient (2.19) [ 33 ][ DONE ] > mpc (0.34) [ 28 ][ DONE ] > perl-Net-CIDR-Lite (0.21) [ 11 ][ DONE ] > perl-Net-SMTP-SSL (1.04) [ 12 ][ DONE ] > perl-MIME-Base64 (3.16) [ 16 ][ DONE ] > perl-Authen-SASL (2.16) [ 16 ][ DONE ] > perl-MIME-Lite (3.033) [ 12 ][ DONE ] > perl-Email-Date-Format (1.005) [ 12 ][ DONE ] > vnstat (2.11) [ 1:30 ][ DONE ] > iw (5.19) [ 13 ][ DONE ] > wpa_supplicant (2.10) [ 59 ][ DONE ] > hostapd (2_10) [ 19 ][ DONE ] > syslinux (6.04-pre1) [ 0 ][ SKIP ] > tftpd (5.2) [ 2:29 ][ DONE ] > cpufrequtils (008) [ 23 ][ DONE ] > gutenprint (5.3.4) [ 4:29 ][ DONE ] > apcupsd (3.14.14) [ 2:38 ][ DONE ] > fireperf (0.2.0) [ 1:48 ][ DONE ] > iperf (2.1.8) [ 2:22 ][ DONE ] > iperf3 (3.16) [ 1:35 ][ DONE ] > 7zip (17.05) [ 26 ][ DONE ] > lynis (3.0.9) [ 18 ][ DONE ] > sshfs (3.7.2) [ 24 ][ DONE ] > taglib (1.12) [ 1:01 ][ DONE ] > sslh (1.22c) [ 9 ][ DONE ] > perl-gettext (1.05) [ 19 ][ DONE ] > perl-Sort-Naturally (1.03) [ 12 ][ DONE ] > vdradmin (3.6.10) [ 20 ][ DONE ] > perl-DBI (1.631) [ 46 ][ DONE ] > perl-DBD-SQLite (1.40) [ 23 ][ DONE ] > perl-File-ReadBackwards (1.05) [ 11 ][ DONE ] > openvmtools (stable-12.0.5) [ 0 ][ SKIP ] > joe (4.6) [ 3:21 ][ DONE ] > monit (5.33.0) [ 5:32 ][ DONE ] > nut (2.8.1) [ 11:12 ][ DONE ] > watchdog (5.16) [ 1:04 ][ DONE ] > usb_modeswitch (2.6.1) [ 18 ][ DONE ] > usb_modeswitch_data (20191128) [ 1:10 ][ DONE ] > zerofree (1.1.1) [ 7 ][ DONE ] > minicom (2.9) [ 1:50 ][ DONE ] > ddrescue (1.26) [ 7 ][ DONE ] > parted (3.6) [ 8:30 ][ DONE ] > swig (4.1.0) [ 5:26 ][ DONE ] > dtc (1.6.1) [ 0 ][ SKIP ] > u-boot (2022.10) [ 0 ][ SKIP ] > wireless-regdb (2023-05-03) [ 9 ][ DONE ] > ddns (014) [ 54 ][ DONE ] > python3-pycparser (2.21) [ 32 ][ DONE ] > python3-charset-normalizer (2.1.1) [ 16 ][ DONE ] > python3-certifi (2022.9.24) [ 14 ][ DONE ] > python3-idna (3.4) [ 19 ][ DONE ] > python3-requests (2.28.1) [ 18 ][ DONE ] > python3-tomli (2.0.1) [ 16 ][ DONE ] > python3-pep517 (0.13.0) [ 14 ][ DONE ] > python3-build (0.8.0) [ 16 ][ DONE ] > python3-install (0.0.3) [ 16 ][ DONE ] > python3-urllib3 (1.26.12) [ 18 ][ DONE ] > python3-flit (3.7.1) [ 27 ][ DONE ] > python3-packaging (23.0) [ 18 ][ DONE ] > python3-typing-extensions (4.4.0) [ 10 ][ DONE ] > python3-semantic-version (2.10.0) [ 16 ][ DONE ] > python3-setuptools-scm (7.0.5) [ 17 ][ DONE ] > python3-setuptools-rust (1.5.2) [ 19 ][ DONE ] > python3-six (1.16.0) [ 15 ][ DONE ] > python3-dateutil (2.8.2) [ 22 ][ DONE ] > python3-jmespath (1.0.1) [ 15 ][ DONE ] > python3-colorama (0.4.5) [ 15 ][ DONE ] > python3-yaml (6.0) [ 19 ][ DONE ] > python3-s3transfer (0.6.0) [ 18 ][ DONE ] > python3-rsa (4.9) [ 18 ][ DONE ] > python3-pyasn1 (0.4.8) [ 21 ][ DONE ] > python3-botocore (1.27.89) [ 2:03 ][ DONE ] > python3-cffi (1.15.1) [ 23 ][ DONE ] > python3-cryptography (38.0.1) [ 21:19 ][ DONE ] > python3-circuitbreaker (1.4.0) [ 15 ][ DONE ] > python3-pytz (2022.4) [ 1:43 ][ DONE ] > python3-click (8.1.3) [ 21 ][ DONE ] > python3-arrow (1.2.3) [ 18 ][ DONE ] > python3-terminaltables (3.1.10) [ 16 ][ DONE ] > python3-pkgconfig (1.5.5) [ 15 ][ DONE ] > python3-msgpack (1.0.4) [ 18 ][ DONE ] > python3-attrs (22.1.0) [ 22 ][ DONE ] > python3-sniffio (1.3.0) [ 16 ][ DONE ] > python3-sortedcontainers (2.4.0) [ 17 ][ DONE ] > python3-outcome (1.2.0) [ 16 ][ DONE ] > python3-async_generator (1.10) [ 16 ][ DONE ] > python3-flit_scm (1.7.0) [ 21 ][ DONE ] > python3-exceptiongroup (1.1.1) [ 21 ][ DONE ] > python3-trio (0.22.0) [ 38 ][ DONE ] > python3-pyfuse3 (3.2.2) [ 20 ][ DONE ] > aws-cli (1.27.100) [ 5:45 ][ DONE ] > oci-python-sdk (2.107.0) [ 29:02 ][ DONE ] > oci-cli (3.29.4) [ 6:22 ][ DONE ] > transmission (4.0.5) [ 6:03 ][ DONE ] > mtr (0.95) [ 1:39 ][ DONE ] > minidlna (1.3.3) [ 2:52 ][ DONE ] > acpid (2.0.34) [ 1:22 ][ DONE ] > fping (5.1) [ 39 ][ DONE ] > telnet (0.17) [ 32 ][ DONE ] > xinetd (2.3.15.4) [ 1:25 ][ DONE ] > stress (1.0.7) [ 1:03 ][ DONE ] > sarg (2.4.0) [ 2:12 ][ DONE ] > nginx (1.24.0) [ 3:12 ][ DONE ] > sysbench (1.0.20) [ 0 ][ SKIP ] > strace (6.6) [ 12:45 ][ DONE ] > ltrace (0.7.3) [ 0 ][ SKIP ] > ipfire-netboot (v2.0) [ 0 ][ SKIP ] > lcdproc (0e2ce9b) [ 3:29 ][ DONE ] > keepalived (2.2.8) [ 3:35 ][ DONE ] > ipvsadm (1.31) [ 8 ][ DONE ] > perl-Carp-Clan (6.08) [ 14 ][ DONE ] > perl-Date-Calc (6.4) [ 16 ][ DONE ] > perl-Date-Manip (6.86) [ 2:59 ][ DONE ] > perl-File-Tail (1.3) [ 12 ][ DONE ] > perl-TimeDate (2.33) [ 18 ][ DONE ] > swatch (3.2.4) [ 16 ][ DONE ] > tor (0.4.8.10) [ 10:57 ][ DONE ] > wavemon (0.9.5) [ 54 ][ DONE ] > iptraf-ng (1.2.1) [ 14 ][ DONE ] > iotop (1.22) [ 37 ][ DONE ] > stunnel (5.71) [ 2:29 ][ DONE ] > bacula (11.0.6) [ 8:29 ][ DONE ] > perl-Font-TTF (1.06) [ 34 ][ DONE ] > perl-IO-String (1.08) [ 12 ][ DONE ] > perl-PDF-API2 (2.033) [ 40 ][ DONE ] > proxy-accounting (1.0.4) [ 7 ][ DONE ] > tmux (3.3a) [ 2:39 ][ DONE ] > perl-Text-CSV_XS (1.12) [ 18 ][ DONE ] > lua (5.4.6) [ 8 ][ DONE ] > haproxy (2.9.2) [ 25 ][ DONE ] > ipset (7.19) [ 1:51 ][ DONE ] > dnsdist (1.8.0) [ 0 ][ SKIP ] > bird (2.14) [ 2:45 ][ DONE ] > libyang (2.1.148) [ 2:32 ][ DONE ] > abseil-cpp (20230802.1) [ 9:13 ][ DONE ] > protobuf (25.2) [ 15:15 ][ DONE ] > protobuf-c (1.5.0) [ 5:50 ][ DONE ] > frr (9.1) [ 16:23 ][ DONE ] > dmidecode (3.5) [ 0 ][ SKIP ] > mcelog (196) [ 0 ][ SKIP ] > libpciaccess (0.17) [ 1:45 ][ DONE ] > libyajl (2.1.0) [ 36 ][ DONE ] > libvirt (10.0.0) [ 17:31 ][ FAIL ] > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:7395:33: error: expected declaration specifiers or '...' before 'remote_domain_get_messages_ret' > 7395 | remote_domain_get_messages_ret *ret) > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:7438:33: error: expected declaration specifiers or '...' before 'remote_domain_fd_associate_args' > 7438 | remote_domain_fd_associate_args *args) > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:2039:1: warning: 'remoteDispatchConnectOpen' defined but not used [-Wunused-function] > 2039 | remoteDispatchConnectOpen(virNetServer *server G_GNUC_UNUSED, > | ^~~~~~~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1937:1: warning: 'remoteGetStorageConn' defined but not used [-Wunused-function] > 1937 | remoteGetStorageConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1921:1: warning: 'remoteGetSecretConn' defined but not used [-Wunused-function] > 1921 | remoteGetSecretConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1905:1: warning: 'remoteGetNWFilterConn' defined but not used [-Wunused-function] > 1905 | remoteGetNWFilterConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1889:1: warning: 'remoteGetNodeDevConn' defined but not used [-Wunused-function] > 1889 | remoteGetNodeDevConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1873:1: warning: 'remoteGetNetworkConn' defined but not used [-Wunused-function] > 1873 | remoteGetNetworkConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~~ > ../src/remote/remote_daemon_dispatch.c:1857:1: warning: 'remoteGetInterfaceConn' defined but not used [-Wunused-function] > 1857 | remoteGetInterfaceConn(virNetServerClient *client) > | ^~~~~~~~~~~~~~~~~~~~~~ > ninja: build stopped: subcommand failed. > make: *** [libvirt:86: /usr/src/log/libvirt-10.0.0] Error 1 > > ERROR: Building libvirt [ FAIL ] > Check /build/nightly/next/log/_build.ipfire.log for errors if applicable[ FAIL ]

2 8

[PATCH] file: Update to version 5.45
by Adolf Belka 31 Jan '24

31 Jan '24

- Update from version 5.44 to 5.45 - Update of rootfile not required - Changelog 5.45 * PR/465: psrok1: Avoid muslc asctime_r crash * add SIMH tape format support * bump the max size of the elf section notes to be read to 128K and make it configurable * PR/415: Fix decompression with program returning empty * PR/408: fix -p with seccomp * PR/412: fix MinGW compilation Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- lfs/file | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/lfs/file b/lfs/file index 7877425ea..76c6441ef 100644 --- a/lfs/file +++ b/lfs/file @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2022 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 5.44 +VER = 5.45 THISAPP = file-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = a90ccae738a95315d75a0aaee7bbff3624425cc9267daf18ba9147b7c9b9ebfb31288b54c63a73e4695eca0e876f206e40bcb81c422f1bf572b976e753b25a42 +$(DL_FILE)_BLAKE2 = 30fc77c091e6624f2e9a950f4c6fe69ea6aa46d4a8ad9f20d49320a3675617c5bfbc9ff1ebba5eeb2cf4435c38d71b47b8beeb5146c9f55fe3bac11fe65e89bd install : $(TARGET) @@ -70,7 +70,9 @@ $(subst %,%_BLAKE2,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && ./configure --prefix=/usr --disable-bzlib + cd $(DIR_APP) && ./configure \ + --prefix=/usr \ + --disable-bzlib cd $(DIR_APP) && make $(MAKETUNING) cd $(DIR_APP) && make install @rm -rf $(DIR_APP) -- 2.43.0

1 4

[PATCH] acl: Update to version 2.3.2
by Adolf Belka 31 Jan '24

31 Jan '24

- Update from version 2.3.1 to 2.3.2 - Update of rootfile - Changelog is only available from reviewing the git commits https://git.savannah.nongnu.org/cgit/acl.git/log/ Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/common/acl | 4 ++-- lfs/acl | 11 +++++++---- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/config/rootfiles/common/acl b/config/rootfiles/common/acl index a3476d9a5..505fd563c 100644 --- a/config/rootfiles/common/acl +++ b/config/rootfiles/common/acl @@ -7,13 +7,12 @@ usr/bin/setfacl #usr/lib/libacl.la usr/lib/libacl.so usr/lib/libacl.so.1 -usr/lib/libacl.so.1.1.2301 +usr/lib/libacl.so.1.1.2302 #usr/lib/pkgconfig/libacl.pc #usr/share/doc/acl #usr/share/doc/acl/CHANGES #usr/share/doc/acl/COPYING #usr/share/doc/acl/COPYING.LGPL -#usr/share/doc/acl/PORTING #usr/share/doc/acl/extensions.txt #usr/share/doc/acl/libacl.txt #usr/share/locale/de/LC_MESSAGES/acl.mo @@ -22,6 +21,7 @@ usr/lib/libacl.so.1.1.2301 #usr/share/locale/es/LC_MESSAGES/acl.mo #usr/share/locale/fr/LC_MESSAGES/acl.mo #usr/share/locale/gl/LC_MESSAGES/acl.mo +#usr/share/locale/ka/LC_MESSAGES/acl.mo #usr/share/locale/pl/LC_MESSAGES/acl.mo #usr/share/locale/sv/LC_MESSAGES/acl.mo #usr/share/man/man1/chacl.1 diff --git a/lfs/acl b/lfs/acl index 9c5c46952..b0008d4db 100644 --- a/lfs/acl +++ b/lfs/acl @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 2.3.1 +VER = 2.3.2 THISAPP = acl-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 15e81e8159ddb21ef0c262bef3101c0b6fa546738a2ab74c01ccc21fd1c3dc8ab6aaf84a06dee6da22291f3ca4feeffa60c7d11bfac1ab770a6ec28e1f1655e0 +$(DL_FILE)_BLAKE2 = 9f2abfddcd403df2c716c05f02a1b52453613d10948dc58a65b9ef41b44e37db6de99fb22dcfc4f6f0fb5d0319c939da61bd4e0fba2cdb5643e8087ecd34eeac install : $(TARGET) @@ -70,7 +70,10 @@ $(subst %,%_BLAKE2,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && ./configure --prefix=/usr --libexecdir=/usr/lib --disable-static + cd $(DIR_APP) && ./configure \ + --prefix=/usr \ + --libexecdir=/usr/lib \ + --disable-static cd $(DIR_APP) && make cd $(DIR_APP) && make install chmod -v 755 /usr/lib/libacl.so -- 2.43.0

2 8

[PATCH 1/3] vpnmain.cgi: Do not use a bad source for randomness
by Michael Tremer 30 Jan '24

30 Jan '24

Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> --- html/cgi-bin/vpnmain.cgi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/html/cgi-bin/vpnmain.cgi b/html/cgi-bin/vpnmain.cgi index 53507305f..8b05a0de7 100644 --- a/html/cgi-bin/vpnmain.cgi +++ b/html/cgi-bin/vpnmain.cgi @@ -2141,7 +2141,7 @@ END &General::log("ipsec", "Creating a cert..."); if (open(STDIN, "-|")) { - my $opt = " req -nodes -rand /proc/interrupts:/proc/net/rt_cache"; + my $opt = " req -nodes"; $opt .= " -newkey rsa:4096"; $opt .= " -keyout ${General::swroot}/certs/$cgiparams{'NAME'}key.pem"; $opt .= " -out ${General::swroot}/certs/$cgiparams{'NAME'}req.pem"; -- 2.39.2

1 2

[PATCH 01/15] borgbackup: Update to version 1.2.7
by Adolf Belka 30 Jan '24

30 Jan '24

- Update from version 1.2.3 to 1.2.7 - Update of rootfile - Patch set put together to also update the dependency packages where they have been updated. - Changelog 1.2.7 Fixes: - docs: CVE-2023-36811 upgrade steps: consider checkpoint archives, #7802 - check/compact: fix spurious reappearance of orphan chunks since borg 1.2, #6687 - this consists of 2 fixes: - for existing chunks: check --repair: recreate shadow index, #6687 - for newly created chunks: update shadow index when doing a double-put, #5661 - LockRoster.modify: no KeyError if element was already gone, #7937 - create --X-from-command: run subcommands with a clean environment, #7916 - list --sort-by: support "archive" as alias of "name", #7873 - fix rc and msg if arg parsing throws an exception, #7885 Other changes: - support and test on Python 3.12 - include unistd.h in _chunker.c (fix for Python 3.13) - allow msgpack 1.0.6 and 1.0.7 - TAM issues: show tracebacks, improve borg check logging, #7797 - replace "datetime.utcfromtimestamp" with custom helper to avoid deprecation warnings when using Python 3.12 - vagrant: - use generic/debian9 box, fixes #7579 - add VM with debian bookworm / test on OpenSSL 3.0.x. - docs: - not only attack/unsafe, can also be a fs issue, #7853 - point to CVE-2023-36811 upgrade steps from borg 1.1 to 1.2 upgrade steps, #7899 - upgrade steps needed for all kinds of repos (including "none" encryption mode), #7813 - upgrade steps: talk about consequences of borg check, #7816 - upgrade steps: remove period that could be interpreted as part of the command - automated-local.rst: use GPT UUID for consistent udev rule - create disk/partition sector backup by disk serial number, #7934 - update macOS hint about full disk access - clarify borg prune -a option description, #7871 - readthedocs: also build offline docs (HTMLzip), #7835 - frontends: add "check.rebuild_refcounts" message 1.2.6 Fixes: - The upgrade procedure docs as published with borg 1.2.5 did not work, if the repository had archives resulting from a borg rename or borg recreate operation. The updated docs now use BORG_WORKAROUNDS=ignore_invalid_archive_tam at some places to avoid that issue, #7791. See: fix pre-1.2.5 archives spoofing vulnerability (CVE-2023-36811), details and necessary upgrade procedure described above. Other changes: - updated 1.2.5 changelog entry: 1.2.5 already has the fix for rename/recreate. - remove cython restrictions. recommended is to build with cython 0.29.latest, because borg 1.2.x uses this since years and it is very stable. You can also try to build with cython 3.0.x, there is a good chance that it works. As a 3rd option, we also bundle the `*.c` files cython outputs in the release pypi package, so you can also just use these and not need cython at all. 1.2.5 Fixes: - Security: fix pre-1.2.5 archives spoofing vulnerability (CVE-2023-36811), see details and necessary upgrade procedure described above. - rename/recreate: correctly update resulting archive's TAM, see #7791 - create: do not try to read parent dir of recursion root, #7746 - extract: fix false warning about pattern never matching, #4110 - diff: remove surrogates before output, #7535 - compact: clear empty directories at end of compact process, #6823 - create --files-cache=size: fix crash, #7658 - keyfiles: improve key sanity check, #7561 - only warn about "invalid" chunker params, #7590 - ProgressIndicatorPercent: fix space computation for wide chars, #3027 - improve argparse validator error messages New features: - mount: make up volname if not given (macOS), #7690. macFUSE supports a volname mount option to give what finder displays on the desktop / in the directory view. if the user did not specify it, we make something up, because otherwise it would be "macFUSE Volume 0 (Python)" and hide the mountpoint directory name. - BORG_WORKAROUNDS=authenticated_no_key to extract from authenticated repos without key, #7700 Other changes: - add `utcnow()` helper function to avoid deprecated `datetime.utcnow()` - stay on latest Cython 0.29 (0.29.36) for borg 1.2.x (do not use Cython 3.0 yet) - docs: - move upgrade notes to own section, see #7546 - mount -olocal: how to show mount in finder's sidebar, #5321 - list: fix --pattern examples, #7611 - improve patterns help - incl./excl. options, path-from-stdin exclusiveness - obfuscation docs: markup fix, note about MAX_DATA_SIZE - --one-file-system: add macOS apfs notes, #4876 - improve --one-file-system help string, #5618 - rewrite borg check docs - improve the docs for --keep-within, #7687 - fix borg init command in environment.rst.inc - 1.1.x upgrade notes: more precise borg upgrade instructions, #3396 -tests: - fix repo reopen - avoid long ids in pytest output - check buzhash chunksize distribution, see #7586 1.2.4 New features: - import-tar: add --ignore-zeros to process concatenated tars, #7432. - debug id-hash: computes file/chunk content id-hash, #7406 - diff: --content-only does not show mode/ctime/mtime changes, #7248 - diff: JSON strings in diff output are now sorted alphabetically Bug fixes: - xattrs: fix namespace processing on FreeBSD, #6997 - diff: fix path related bug seen when addressing deferred items. - debug get-obj/put-obj: always give chunkid as cli param, see #7290 (this is an incompatible change, see also borg debug id-hash) - extract: fix mtime when ResourceFork xattr is set (macOS specific), #7234 - recreate: without --chunker-params, do not re-chunk, #7337 - recreate: when --target is given, do not detect "nothing to do". use case: borg recreate -a src --target dst can be used to make a copy of an archive inside the same repository, #7254. - set .hardlink_master for ALL hardlinkable items, #7175 - locking: fix host, pid, tid order. tid (thread id) must be parsed as hex from lock file name. - update development.lock.txt, including a setuptools security fix, #7227 Other changes: - requirements: allow msgpack 1.0.5 also - upgrade Cython to 0.29.33 - hashindex minor fixes, refactor, tweaks, tests - use os.replace not os.rename - remove BORG_LIBB2_PREFIX (not used any more) - docs: - BORG_KEY_FILE: clarify docs, #7444 - update FAQ about locale/unicode issues, #6999 - improve mount options rendering, #7359 - make timestamps in manual pages reproducible - installation: update Fedora in distribution list, #7357 - tests: - fix test_size_on_disk_accurate for large st_blksize, #7250 - add same_ts_ns function and use it for relaxed timestamp comparisons - "auto" compressor tests: don't assume a specific size, do not assume zlib is better than lz4, #7363 - add test for extracted directory mtime - vagrant: - upgrade local freebsd 12.1 box -> generic/freebsd13 box (13.1) - use pythons > 3.8 which work on freebsd 13.1 - pyenv: also install python 3.11.1 for testing - pyenv: use python 3.10.1, 3.10.0 build is broken on freebsd Tested-by: Adolf Belka <adolf.belka(a)ipfire.org> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/borgbackup | 36 ++++++++++++++-------------- lfs/borgbackup | 8 +++---- 2 files changed, 22 insertions(+), 22 deletions(-) diff --git a/config/rootfiles/packages/borgbackup b/config/rootfiles/packages/borgbackup index feaca4156..897d1d1be 100644 --- a/config/rootfiles/packages/borgbackup +++ b/config/rootfiles/packages/borgbackup @@ -6,23 +6,23 @@ usr/lib/python3.10/site-packages/borg/__main__.py usr/lib/python3.10/site-packages/borg/_version.py #usr/lib/python3.10/site-packages/borg/algorithms usr/lib/python3.10/site-packages/borg/algorithms/__init__.py -usr/lib/python3.10/site-packages/borg/algorithms/checksums.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/algorithms/checksums.cpython-310-x86_64-linux-gnu.so usr/lib/python3.10/site-packages/borg/archive.py usr/lib/python3.10/site-packages/borg/archiver.py usr/lib/python3.10/site-packages/borg/cache.py -usr/lib/python3.10/site-packages/borg/chunker.cpython-310-xxxMACHINExxx-linux-gnu.so -usr/lib/python3.10/site-packages/borg/compress.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/chunker.cpython-310-x86_64-linux-gnu.so +usr/lib/python3.10/site-packages/borg/compress.cpython-310-x86_64-linux-gnu.so usr/lib/python3.10/site-packages/borg/constants.py #usr/lib/python3.10/site-packages/borg/crypto usr/lib/python3.10/site-packages/borg/crypto/__init__.py usr/lib/python3.10/site-packages/borg/crypto/file_integrity.py usr/lib/python3.10/site-packages/borg/crypto/key.py usr/lib/python3.10/site-packages/borg/crypto/keymanager.py -usr/lib/python3.10/site-packages/borg/crypto/low_level.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/crypto/low_level.cpython-310-x86_64-linux-gnu.so usr/lib/python3.10/site-packages/borg/crypto/nonces.py usr/lib/python3.10/site-packages/borg/fuse.py usr/lib/python3.10/site-packages/borg/fuse_impl.py -usr/lib/python3.10/site-packages/borg/hashindex.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/hashindex.cpython-310-x86_64-linux-gnu.so #usr/lib/python3.10/site-packages/borg/helpers usr/lib/python3.10/site-packages/borg/helpers/__init__.py usr/lib/python3.10/site-packages/borg/helpers/checks.py @@ -37,7 +37,7 @@ usr/lib/python3.10/site-packages/borg/helpers/process.py usr/lib/python3.10/site-packages/borg/helpers/progress.py usr/lib/python3.10/site-packages/borg/helpers/time.py usr/lib/python3.10/site-packages/borg/helpers/yes.py -usr/lib/python3.10/site-packages/borg/item.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/item.cpython-310-x86_64-linux-gnu.so usr/lib/python3.10/site-packages/borg/locking.py usr/lib/python3.10/site-packages/borg/logger.py usr/lib/python3.10/site-packages/borg/lrucache.py @@ -47,9 +47,9 @@ usr/lib/python3.10/site-packages/borg/patterns.py #usr/lib/python3.10/site-packages/borg/platform usr/lib/python3.10/site-packages/borg/platform/__init__.py usr/lib/python3.10/site-packages/borg/platform/base.py -usr/lib/python3.10/site-packages/borg/platform/linux.cpython-310-xxxMACHINExxx-linux-gnu.so -usr/lib/python3.10/site-packages/borg/platform/posix.cpython-310-xxxMACHINExxx-linux-gnu.so -usr/lib/python3.10/site-packages/borg/platform/syncfilerange.cpython-310-xxxMACHINExxx-linux-gnu.so +usr/lib/python3.10/site-packages/borg/platform/linux.cpython-310-x86_64-linux-gnu.so +usr/lib/python3.10/site-packages/borg/platform/posix.cpython-310-x86_64-linux-gnu.so +usr/lib/python3.10/site-packages/borg/platform/syncfilerange.cpython-310-x86_64-linux-gnu.so usr/lib/python3.10/site-packages/borg/platform/xattr.py usr/lib/python3.10/site-packages/borg/platformflags.py usr/lib/python3.10/site-packages/borg/remote.py @@ -72,6 +72,7 @@ usr/lib/python3.10/site-packages/borg/testsuite/crypto.py usr/lib/python3.10/site-packages/borg/testsuite/efficient_collection_queue.py usr/lib/python3.10/site-packages/borg/testsuite/file_integrity.py usr/lib/python3.10/site-packages/borg/testsuite/hashindex.py +usr/lib/python3.10/site-packages/borg/testsuite/hashindex_stress.py usr/lib/python3.10/site-packages/borg/testsuite/helpers.py usr/lib/python3.10/site-packages/borg/testsuite/item.py usr/lib/python3.10/site-packages/borg/testsuite/key.py @@ -91,12 +92,11 @@ usr/lib/python3.10/site-packages/borg/testsuite/xattr.py usr/lib/python3.10/site-packages/borg/upgrader.py usr/lib/python3.10/site-packages/borg/version.py usr/lib/python3.10/site-packages/borg/xattr.py -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/PKG-INFO -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/SOURCES.txt -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/dependency_links.txt -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/entry_points.txt -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/not-zip-safe -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/requires.txt -usr/lib/python3.10/site-packages/borgbackup-1.2.3-py3.10.egg-info/top_level.txt - +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/PKG-INFO +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/SOURCES.txt +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/dependency_links.txt +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/entry_points.txt +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/not-zip-safe +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/requires.txt +usr/lib/python3.10/site-packages/borgbackup-1.2.7-py3.10.egg-info/top_level.txt diff --git a/lfs/borgbackup b/lfs/borgbackup index 79d6446ee..7b77fd4bb 100644 --- a/lfs/borgbackup +++ b/lfs/borgbackup @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 1.2.3 +VER = 1.2.7 SUMMARY = Deduplicating backup program with compression and authenticated encryption THISAPP = borgbackup-$(VER) @@ -33,7 +33,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = borgbackup -PAK_VER = 15 +PAK_VER = 16 DEPS = python3-msgpack python3-packaging python3-pyfuse3 # borgbackup only works with specific versions of python3-msgpack @@ -48,7 +48,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 970fad62428b44eb22df761020a4c25f4aa8d3e8f5cc2c81aa96b1afb051dc24b3d124b4fc84e81cf8eaa6a9b19a200f6f9bda1f7f4c2794a7e8d33e8d5020f1 +$(DL_FILE)_BLAKE2 = 8d69f3e7890ee117e1fe2cdf6b92c548bc40b337de09850948150034fc4724bf05c51c852a268df2294e3657676920a1c663a421331fd6dba5fffa558429f11e install : $(TARGET) -- 2.43.0

3 18

Re: [FAILED] Nightly Build of next (fc37ab7) for x86_64 on x86-01.haj.ipfire.org
by Michael Tremer 30 Jan '24

30 Jan '24

Hello, These have just accidentally been removed and I added them back again: https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=e2dce81ca343d4b55f6… -Michael > On 30 Jan 2024, at 12:12, Adolf Belka <adolf.belka(a)ipfire.org> wrote: > > Hi All, > > This failed announcement was for nightly build version fc37ab7a. > > Looking in the Nightly Build directory I saw that there is a newer latest entry which has built successfully with the three additional packages for frr. > > I haven't seen the email notification of that successfully build yet but it looks like the problem has been solved whatever it was. > > Regards, > Adolf. > > > On 30/01/2024 09:28, Adolf Belka wrote: >> Hi Michael, >> >> I am not sure what is happening here. The build has run libyang and the new frr but not the protobuf, protobuf-c and abseil-cpp new build only packages and hence has failed because frr-9.1 requires them for the build. >> >> I thought at first I had made a mess of the entries in each of the separate make.sh files for each package commit but they look alright to me in the patch submissions I sent in. >> >> Also in the next git repo all three of those commits are listed and in the correct order. >> >> Struggling to figure out what the problem is. Any thoughts from you or anyone else? >> >> Maybe the frr patch set should be reverted until I can fix whatever the problem is. Must be some problem in how I split up the total frr build into the 5 patch submissions. >> >> Regards, >> Adolf. >> >> >> On 29/01/2024 20:27, IPFire Nightly Builder wrote: >>> https://nightly.ipfire.org/next/2024-01-29%2016%3A08%3A11%20%2B0000-fc37ab7… >>> >>> commit fc37ab7a5194479c551934db9e0fef115e65f0a3 >>> Author: Michael Tremer <michael.tremer(a)ipfire.org> >>> Date: Mon Jan 29 16:08:11 2024 +0000 >>> >>> libvirt: Fix rootfile for riscv64 >>> Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> >>> >>> https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=fc37ab7a5194479c55193… >>> >>> Packaged toolchain compilation >>> Checking for necessary space on disk [ DONE ] >>> Set cache size limit to 4.0 GB >>> Building LFS >>> stage2 [ 1 ][ DONE ] >>> linux (6.6.13) KCFG=-headers [ 29 ][ DONE ] >>> man-pages (5.13) [ 7 ][ DONE ] >>> glibc (2.38) [ 3:56 ][ DONE ] >>> tzdata (2023d) [ 4 ][ DONE ] >>> cleanup-toolchain [ 0 ][ DONE ] >>> zlib (1.3) [ 3 ][ DONE ] >>> zstd (1.5.5) [ 1 ][ DONE ] >>> autoconf (2.71) [ 2 ][ DONE ] >>> automake (1.16.5) [ 3 ][ DONE ] >>> help2man (1.49.2) [ 1 ][ DONE ] >>> libtool (2.4.7) [ 8 ][ DONE ] >>> binutils (2.41) [ 45 ][ DONE ] >>> gmp (6.3.0) [ 27 ][ DONE ] >>> mpfr (4.2.1) [ 13 ][ DONE ] >>> libmpc (1.3.1) [ 5 ][ DONE ] >>> libxcrypt (4.4.36) [ 12 ][ DONE ] >>> file (5.44) [ 9 ][ DONE ] >>> gcc (13.2.0) [ 5:37 ][ DONE ] >>> attr (2.5.2) [ 5 ][ DONE ] >>> acl (2.3.1) [ 11 ][ DONE ] >>> sed (4.9) [ 29 ][ DONE ] >>> berkeley (5.3.28) [ 26 ][ DONE ] >>> coreutils (9.0) [ 2:32 ][ DONE ] >>> iana-etc (20231026) [ 1 ][ DONE ] >>> m4 (1.4.19) [ 44 ][ DONE ] >>> bison (3.8.2) [ 42 ][ DONE ] >>> ncurses (6.4) [ 35 ][ DONE ] >>> perl (5.36.0) [ 2:47 ][ DONE ] >>> readline (8.2) [ 8 ][ DONE ] >>> bzip2 (1.0.8) [ 2 ][ DONE ] >>> xz (5.4.5) [ 17 ][ DONE ] >>> lzip (1.23) [ 0 ][ DONE ] >>> pcre (8.45) [ 11 ][ DONE ] >>> pcre2 (10.42) [ 7 ][ DONE ] >>> gettext (0.22) [ 3:11 ][ DONE ] >>> bash (5.2) [ 34 ][ DONE ] >>> diffutils (3.9) [ 34 ][ DONE ] >>> ed (1.19) [ 0 ][ DONE ] >>> findutils (4.9.0) [ 48 ][ DONE ] >>> flex (2.6.4) [ 10 ][ DONE ] >>> gawk (5.3.0) [ 17 ][ DONE ] >>> go (1.20.4) [ 26 ][ DONE ] >>> grep (3.11) [ 31 ][ DONE ] >>> groff (1.23.0) [ 38 ][ DONE ] >>> gperf (3.1) [ 4 ][ DONE ] >>> gzip (1.13) [ 20 ][ DONE ] >>> hostname (3.20) [ 0 ][ DONE ] >>> whois (5.5.18) [ 1 ][ DONE ] >>> kbd (2.5.1) [ 15 ][ DONE ] >>> less (633) [ 6 ][ DONE ] >>> pkg-config (0.29.2) [ 30 ][ DONE ] >>> procps (v4.0.4) [ 18 ][ DONE ] >>> make (4.4.1) [ 15 ][ DONE ] >>> libpipeline (1.5.7) [ 22 ][ DONE ] >>> man (2.12.0) [ 58 ][ DONE ] >>> net-tools (2.10) [ 1 ][ DONE ] >>> patch (2.7.6) [ 26 ][ DONE ] >>> psmisc (23.6) [ 6 ][ DONE ] >>> shadow (4.14.3) [ 12 ][ DONE ] >>> sysklogd (1.5.1) [ 0 ][ DONE ] >>> sysvinit (3.08) [ 2 ][ DONE ] >>> tar (1.35) [ 40 ][ DONE ] >>> texinfo (7.1) [ 31 ][ DONE ] >>> util-linux (2.39.2) [ 26 ][ DONE ] >>> vim (9.0) [ 21 ][ DONE ] >>> e2fsprogs (1.46.5) [ 18 ][ DONE ] >>> jq (1.7) [ 11 ][ DONE ] >>> Building IPFire >>> configroot [ 2 ][ DONE ] >>> initscripts [ 1 ][ DONE ] >>> backup [ 0 ][ DONE ] >>> rust (1.67.0) [ 15 ][ DONE ] >>> openssl (3.2.0) [ 4:35 ][ DONE ] >>> popt (1.19) [ 6 ][ DONE ] >>> libedit (20230828-3.1) [ 10 ][ DONE ] >>> pam (1.6.0) [ 55 ][ DONE ] >>> libcap (2.69) [ 4 ][ DONE ] >>> libcap-ng (0.8.3) [ 6 ][ DONE ] >>> libpcap (1.10.4) [ 12 ][ DONE ] >>> ppp (2.5.0) [ 16 ][ DONE ] >>> pptp (1.10.0) [ 1 ][ DONE ] >>> unzip (60) [ 2 ][ DONE ] >>> which (2.21) [ 3 ][ DONE ] >>> bc (1.07.1) [ 7 ][ DONE ] >>> cpio (2.14) [ 31 ][ DONE ] >>> libaio (0.3.113) [ 0 ][ DONE ] >>> freetype (2.13.2) [ 5 ][ DONE ] >>> libmnl (1.0.5) [ 4 ][ DONE ] >>> libnfnetlink (1.0.2) [ 3 ][ DONE ] >>> libnetfilter_queue (1.0.5) [ 4 ][ DONE ] >>> libnetfilter_conntrack (1.0.9) [ 4 ][ DONE ] >>> libnetfilter_cthelper (1.0.1) [ 4 ][ DONE ] >>> libnetfilter_cttimeout (1.0.1) [ 4 ][ DONE ] >>> iptables (1.8.10) [ 6 ][ DONE ] >>> iproute2 (6.7.0) [ 3 ][ DONE ] >>> screen (4.9.0) [ 10 ][ DONE ] >>> elfutils (0.190) [ 11 ][ DONE ] >>> expat (2.5.0) [ 7 ][ DONE ] >>> libconfig (1.7.3) [ 16 ][ DONE ] >>> curl (8.2.1) [ 26 ][ DONE ] >>> libarchive (3.7.0) [ 30 ][ DONE ] >>> cmake (3.25.2) [ 32 ][ DONE ] >>> json-c (0.17) [ 9 ][ DONE ] >>> tcl (8.6.13) [ 34 ][ DONE ] >>> libffi (3.4.4) [ 6 ][ DONE ] >>> gdbm (1.23) [ 13 ][ DONE ] >>> sqlite (3450000) [ 5 ][ DONE ] >>> python3 (3.10.8) [ 1:01 ][ DONE ] >>> python3-setuptools (67.5.1) [ 4 ][ DONE ] >>> python3-MarkupSafe (2.1.3) [ 2 ][ DONE ] >>> python3-Jinja2 (3.1.2) [ 1 ][ DONE ] >>> ninja (1.11.1) [ 2 ][ DONE ] >>> meson (1.3.1) [ 4 ][ DONE ] >>> kmod (31) [ 10 ][ DONE ] >>> udev (254) [ 24 ][ DONE ] >>> libusb (1.0.26) [ 6 ][ DONE ] >>> mdadm (4.2) [ 1 ][ DONE ] >>> dracut (056) [ 2 ][ DONE ] >>> lvm2 (2.03.23) [ 12 ][ DONE ] >>> multipath-tools (0.8.9) [ 1 ][ DONE ] >>> glib (2.77.0) [ 24 ][ DONE ] >>> libgudev (238) [ 3 ][ DONE ] >>> libgpg-error (1.47) [ 14 ][ DONE ] >>> libgcrypt (1.10.3) [ 16 ][ DONE ] >>> libassuan (2.5.5) [ 10 ][ DONE ] >>> nettle (3.9) [ 10 ][ DONE ] >>> libsodium (1.0.19) [ 18 ][ DONE ] >>> libevent2 (2.1.12-stable) [ 14 ][ DONE ] >>> apr (1.7.4) [ 23 ][ DONE ] >>> aprutil (1.6.3) [ 5 ][ DONE ] >>> unbound (1.19.0) [ 26 ][ DONE ] >>> gnutls (3.8.3) [ 1:01 ][ DONE ] >>> libuv (1.44.2) [ 9 ][ DONE ] >>> bind (9.16.45) [ 39 ][ DONE ] >>> dhcp (4.4.3-P1) [ 29 ][ DONE ] >>> dhcpcd (10.0.6) [ 4 ][ DONE ] >>> boost (1_83_0) [ 3:01 ][ DONE ] >>> linux-atm (2.4.1) [ 12 ][ DONE ] >>> libqmi (1.30.8) [ 13 ][ DONE ] >>> c-ares (1.17.1) [ 1:23 ][ DONE ] >>> rust-dissimilar (1.0.3) [ 1 ][ DONE ] >>> rust-cfg-if (1.0.0) [ 1 ][ DONE ] >>> rust-libc (0.2.108) [ 2 ][ DONE ] >>> rust-getrandom (0.2.4) [ 2 ][ DONE ] >>> rust-typenum (1.15.0) [ 3 ][ DONE ] >>> rust-version-check (0.9.4) [ 1 ][ DONE ] >>> rust-generic-array (0.14.4) [ 3 ][ DONE ] >>> rust-crypto-common (0.1.1) [ 3 ][ DONE ] >>> rust-cipher (0.3.0) [ 3 ][ DONE ] >>> rust-hex (0.4.3) [ 1 ][ DONE ] >>> rust-unicode-xid (0.2.1) [ 0 ][ DONE ] >>> rust-proc-macro2 (1.0.36) [ 3 ][ DONE ] >>> rust-quote (1.0.15) [ 4 ][ DONE ] >>> rust-syn (1.0.86) [ 11 ][ DONE ] >>> rust-home (0.5.3) [ 1 ][ DONE ] >>> rust-lazy-static (1.4.0) [ 1 ][ DONE ] >>> rust-memchr (2.4.1) [ 3 ][ DONE ] >>> rust-aho-corasick (0.7.18) [ 6 ][ DONE ] >>> rust-regex-syntax (0.6.25) [ 9 ][ DONE ] >>> rust-regex (1.5.3) [ 18 ][ DONE ] >>> rust-ucd-trie (0.1.3) [ 1 ][ DONE ] >>> rust-pest (2.1.3) [ 2 ][ DONE ] >>> rust-semver-parser (0.7.0) [ 1 ][ DONE ] >>> rust-semver (0.9.0) [ 2 ][ DONE ] >>> rust-same-file (1.0.6) [ 1 ][ DONE ] >>> rust-walkdir (2.3.2) [ 1 ][ DONE ] >>> rust-dirs (1.0.5) [ 2 ][ DONE ] >>> rust-toolchain_find (0.1.4) [ 14 ][ DONE ] >>> rust-serde (1.0.136) [ 4 ][ DONE ] >>> rust-itoa (1.0.1) [ 1 ][ DONE ] >>> rust-ryu (1.0.9) [ 1 ][ DONE ] >>> rust-serde_json (1.0.78) [ 7 ][ DONE ] >>> rust-synstructure (0.12.6) [ 14 ][ DONE ] >>> rust-block-buffer (0.9.0) [ 2 ][ DONE ] >>> rust-digest (0.9.0) [ 3 ][ DONE ] >>> rust-ppv-lite86 (0.2.16) [ 1 ][ DONE ] >>> rust-rand_core (0.6.3) [ 1 ][ DONE ] >>> rust-rand_core-0.4.2 (0.4.2) [ 1 ][ DONE ] >>> rust-rand_core-0.3.1 (0.3.1) [ 1 ][ DONE ] >>> rust-rand_chacha (0.3.1) [ 1 ][ DONE ] >>> rust-rand_hc (0.3.1) [ 1 ][ DONE ] >>> rust-rand (0.8.4) [ 3 ][ DONE ] >>> rust-rdrand (0.4.0) [ 1 ][ DONE ] >>> rust-rand-0.4 (0.4.6) [ 2 ][ DONE ] >>> rust-log (0.4.14) [ 2 ][ DONE ] >>> rust-num_cpus (1.13.1) [ 2 ][ DONE ] >>> rust-crossbeam-utils (0.8.6) [ 2 ][ DONE ] >>> rust-autocfg (1.0.1) [ 1 ][ DONE ] >>> rust-memoffset (0.6.5) [ 2 ][ DONE ] >>> rust-scopeguard (1.1.0) [ 1 ][ DONE ] >>> rust-crossbeam-epoch (0.9.6) [ 3 ][ DONE ] >>> rust-crossbeam-deque (0.8.1) [ 2 ][ DONE ] >>> rust-either (1.6.1) [ 1 ][ DONE ] >>> rust-crossbeam-channel (0.5.2) [ 2 ][ DONE ] >>> rust-rayon-core (1.9.1) [ 5 ][ DONE ] >>> rust-rayon (1.5.1) [ 5 ][ DONE ] >>> rust-remove_dir_all (0.5.3) [ 1 ][ DONE ] >>> rust-tempdir (0.3.7) [ 3 ][ DONE ] >>> rust-glob (0.3.0) [ 1 ][ DONE ] >>> rust-once_cell (1.9.0) [ 1 ][ DONE ] >>> rust-termcolor (1.1.2) [ 1 ][ DONE ] >>> rust-toml (0.5.8) [ 10 ][ DONE ] >>> rust-serde_derive (1.0.136) [ 28 ][ DONE ] >>> rust-trybuild (1.0.54) [ 53 ][ DONE ] >>> rust-unindent (0.1.7) [ 0 ][ DONE ] >>> rust-proc-macro-hack (0.5.19) [ 5 ][ DONE ] >>> rust-indoc-impl (0.3.6) [ 12 ][ DONE ] >>> rust-indoc (1.0.3) [ 2 ][ DONE ] >>> rust-indoc-0.3.6 (0.3.6) [ 13 ][ DONE ] >>> rust-instant (0.1.12) [ 1 ][ DONE ] >>> rust-lock_api (0.4.5) [ 1 ][ DONE ] >>> rust-smallvec (1.8.0) [ 1 ][ DONE ] >>> rust-parking_lot_core (0.8.5) [ 2 ][ DONE ] >>> rust-parking_lot (0.11.2) [ 3 ][ DONE ] >>> rust-paste-impl (0.1.18) [ 6 ][ DONE ] >>> rust-paste (1.0.3) [ 2 ][ DONE ] >>> rust-paste-0.1.18 (0.1.18) [ 7 ][ DONE ] >>> rust-ctor (0.1.21) [ 21 ][ DONE ] >>> rust-ghost (0.1.2) [ 14 ][ DONE ] >>> rust-inventory-impl (0.1.4) [ 12 ][ DONE ] >>> rust-inventory (0.1.4) [ 25 ][ DONE ] >>> rust-pyo3-build-config (0.15.2) [ 6 ][ DONE ] >>> rust-pyo3-macros-backend (0.15.2) [ 25 ][ DONE ] >>> rust-pyo3-macros (0.15.2) [ 28 ][ DONE ] >>> rust-pyo3 (0.15.2) [ 36 ][ DONE ] >>> rust-num-traits (0.2.15) [ 3 ][ DONE ] >>> rust-num-integer (0.1.45) [ 4 ][ DONE ] >>> rust-num_threads (0.1.5) [ 1 ][ DONE ] >>> rust-time (0.1.43) [ 3 ][ DONE ] >>> rust-iana-time-zone (0.1.51) [ 0 ][ DONE ] >>> rust-chrono (0.4.22) [ 8 ][ DONE ] >>> rust-asn1_derive (0.12.2) [ 16 ][ DONE ] >>> rust-asn1 (0.12.2) [ 18 ][ DONE ] >>> rust-proc-macro-error-attr (1.0.4) [ 5 ][ DONE ] >>> rust-proc-macro-error (1.0.4) [ 6 ][ DONE ] >>> rust-Inflector (0.11.4) [ 14 ][ DONE ] >>> rust-ouroboros_macro (0.15.5) [ 28 ][ DONE ] >>> rust-aliasable (0.1.3) [ 1 ][ DONE ] >>> rust-stable_deref_trait (1.2.0) [ 0 ][ DONE ] >>> rust-ouroboros (0.15.5) [ 29 ][ DONE ] >>> rust-base64 (0.13.0) [ 1 ][ DONE ] >>> rust-pem (1.1.0) [ 2 ][ DONE ] >>> gdb (13.2) [ 1:07 ][ DONE ] >>> grub (2.12) [ 1:54 ][ DONE ] >>> mandoc (1.14.6) [ 5 ][ DONE ] >>> efivar (38) [ 4 ][ DONE ] >>> efibootmgr (18) [ 1 ][ DONE ] >>> libtasn1 (4.19.0) [ 17 ][ DONE ] >>> p11-kit (0.25.3) [ 10 ][ DONE ] >>> ca-certificates (20231204) [ 3 ][ DONE ] >>> fireinfo (2.2.0) [ 10 ][ DONE ] >>> libnet (1.1.6) [ 7 ][ DONE ] >>> libnl-3 (3.9.0) [ 12 ][ DONE ] >>> libidn (1.42) [ 18 ][ DONE ] >>> nasm (2.15.05) [ 13 ][ DONE ] >>> libjpeg (2.1.4) [ 4 ][ DONE ] >>> openjpeg (2.5.0) [ 4 ][ DONE ] >>> libexif (0.6.24) [ 6 ][ DONE ] >>> libpng (1.6.39) [ 4 ][ DONE ] >>> libtiff (4.5.1) [ 14 ][ DONE ] >>> gd (2.3.3) [ 7 ][ DONE ] >>> slang (2.3.3) [ 23 ][ DONE ] >>> newt (0.52.23) [ 3 ][ DONE ] >>> libsmooth [ 9 ][ DONE ] >>> pciutils (3.10.0) [ 1 ][ DONE ] >>> usbutils (017) [ 14 ][ DONE ] >>> libxml2 (2.12.3) [ 7 ][ DONE ] >>> libxslt (1.1.37) [ 8 ][ DONE ] >>> perl-BerkeleyDB (0.63) [ 2 ][ DONE ] >>> cyrus-sasl (2.1.26) [ 27 ][ DONE ] >>> openldap (2.6.5) [ 53 ][ DONE ] >>> apache2 (2.4.58) [ 42 ][ DONE ] >>> web-user-interface [ 2 ][ DONE ] >>> flag-icons (2.6) [ 2 ][ DONE ] >>> jquery (3.6.3) [ 1 ][ DONE ] >>> bootstrap (4.0.0-alpha.6) [ 0 ][ DONE ] >>> arping (2.23) [ 8 ][ DONE ] >>> beep (1.3) [ 0 ][ DONE ] >>> libssh (0.10.6) [ 14 ][ DONE ] >>> libinih (56) [ 2 ][ DONE ] >>> cdrkit (1.1.11) [ 9 ][ DONE ] >>> dosfstools (4.2) [ 4 ][ DONE ] >>> exfatprogs (1.1.3) [ 5 ][ DONE ] >>> reiserfsprogs (3.6.27) [ 15 ][ DONE ] >>> liburcu (0.14.0) [ 16 ][ DONE ] >>> xfsprogs (6.5.0) [ 47 ][ DONE ] >>> sysfsutils (2.1.1) [ 11 ][ DONE ] >>> fuse (3.15.0) [ 4 ][ DONE ] >>> ntfs-3g (2022.10.3) [ 15 ][ DONE ] >>> ethtool (6.3) [ 3 ][ DONE ] >>> fcron (3.2.1) [ 12 ][ DONE ] >>> perl-ExtUtils-PkgConfig (1.16) [ 1 ][ DONE ] >>> perl-GD (2.73) [ 2 ][ DONE ] >>> perl-GD-Graph (1.54) [ 1 ][ DONE ] >>> perl-GD-TextUtil (0.86) [ 1 ][ DONE ] >>> perl-Device-SerialPort (1.000002) [ 9 ][ DONE ] >>> perl-Device-Modem (1.56) [ 1 ][ DONE ] >>> perl-Apache-Htpasswd (1.9) [ 1 ][ DONE ] >>> perl-Parse-Yapp (1.21) [ 2 ][ DONE ] >>> perl-Data-UUID (1.224) [ 1 ][ DONE ] >>> perl-Try-Tiny (0.31) [ 1 ][ DONE ] >>> perl-HTTP-Message (6.36) [ 1 ][ DONE ] >>> perl-HTTP-Date (6.05) [ 1 ][ DONE ] >>> gnupg (1.4.23) [ 20 ][ DONE ] >>> hdparm (9.65) [ 0 ][ DONE ] >>> whatmask (1.2) [ 3 ][ DONE ] >>> libtirpc (1.3.3) [ 5 ][ DONE ] >>> conntrack-tools (1.4.7) [ 7 ][ DONE ] >>> iputils (20240117) [ 3 ][ DONE ] >>> l7-protocols (2009-05-10) [ 1 ][ DONE ] >>> hwdata [ 0 ][ DONE ] >>> logrotate (3.21.0) [ 6 ][ DONE ] >>> logwatch (7.8) [ 2 ][ DONE ] >>> misc-progs [ 2 ][ DONE ] >>> nano (7.2) [ 28 ][ DONE ] >>> perl-URI (5.09) [ 1 ][ DONE ] >>> perl-CGI (4.54) [ 1 ][ DONE ] >>> perl-Switch (2.17) [ 1 ][ DONE ] >>> perl-HTML-Tagset (3.04) [ 1 ][ DONE ] >>> perl-HTML-Parser (3.78) [ 1 ][ DONE ] >>> perl-HTML-Template (2.94) [ 2 ][ DONE ] >>> perl-Compress-Zlib (1.35) [ 1 ][ DONE ] >>> perl-Digest (1.19) [ 1 ][ DONE ] >>> perl-Digest-SHA1 (2.13) [ 2 ][ DONE ] >>> perl-Digest-HMAC (1.03) [ 1 ][ DONE ] >>> perl-libwww (6.62) [ 1 ][ DONE ] >>> perl-LWP-Protocol-https (6.10) [ 1 ][ DONE ] >>> perl-Net-HTTP (6.22) [ 2 ][ DONE ] >>> perl-Net-DNS (1.30) [ 2 ][ DONE ] >>> perl-Net-IPv4Addr (0.10) [ 2 ][ DONE ] >>> perl-Net_SSLeay (1.88) [ 3 ][ DONE ] >>> perl-IO-Stringy (2.110) [ 1 ][ DONE ] >>> perl-IO-Socket-SSL (2.066) [ 2 ][ DONE ] >>> perl-Unix-Syslog (1.1) [ 1 ][ DONE ] >>> perl-Mail-Tools (2.07) [ 2 ][ DONE ] >>> perl-MIME-Tools (5.509) [ 1 ][ DONE ] >>> perl-Net-Server (0.97) [ 2 ][ DONE ] >>> perl-Canary-Stability (2013) [ 1 ][ DONE ] >>> perl-Convert-TNEF (0.18) [ 1 ][ DONE ] >>> perl-Convert-UUlib (1.8) [ 3 ][ DONE ] >>> perl-Archive-Tar (1.29) [ 1 ][ DONE ] >>> perl-Archive-Zip (1.16) [ 1 ][ DONE ] >>> perl-Text-Tabs+Wrap (2013.0523) [ 2 ][ DONE ] >>> perl-XML-Parser (2.46) [ 2 ][ DONE ] >>> perl-Crypt-PasswdMD5 (1.41) [ 1 ][ DONE ] >>> perl-Net-Telnet (3.03) [ 1 ][ DONE ] >>> perl-JSON (4.05) [ 1 ][ DONE ] >>> python3-inotify (0.2.10) [ 1 ][ DONE ] >>> python3-docutils (0.19) [ 3 ][ DONE ] >>> python3-daemon (2.3.1) [ 2 ][ DONE ] >>> ntp (4.2.8p17) [ 53 ][ DONE ] >>> openssh (9.6p1) [ 42 ][ DONE ] >>> fontconfig (2.15.0) [ 13 ][ DONE ] >>> dejavu-fonts-ttf (2.37) [ 1 ][ DONE ] >>> ubuntu-font-family (0.83) [ 1 ][ DONE ] >>> freefont (20100919) [ 1 ][ DONE ] >>> pixman (0.43.0) [ 4 ][ DONE ] >>> cairo (1.17.6) [ 14 ][ DONE ] >>> harfbuzz (8.2.2) [ 14 ][ DONE ] >>> fribidi (1.0.12) [ 3 ][ DONE ] >>> pango (1.50.13) [ 7 ][ DONE ] >>> rrdtool (1.8.0) [ 25 ][ DONE ] >>> setup [ 13 ][ DONE ] >>> jansson (2.14) [ 7 ][ DONE ] >>> yaml (0.2.5) [ 5 ][ DONE ] >>> libhtp (0.5.44) [ 12 ][ DONE ] >>> colm (0.14.7) [ 55 ][ DONE ] >>> ragel (7.0.4) [ 1:26 ][ DONE ] >>> hyperscan (5.4.0) [ 19 ][ DONE ] >>> suricata (6.0.15) [ 2:23 ][ DONE ] >>> ids-ruleset-sources [ 0 ][ DONE ] >>> ipblocklist-sources [ 1 ][ DONE ] >>> squid (6.6) [ 2:04 ][ DONE ] >>> squidguard (1.6.0) [ 8 ][ DONE ] >>> calamaris (2.59) [ 0 ][ DONE ] >>> tcpdump (4.99.4) [ 8 ][ DONE ] >>> traceroute (2.1.2) [ 1 ][ DONE ] >>> vlan (1.9) [ 0 ][ DONE ] >>> wireless (30.pre9) [ 1 ][ DONE ] >>> pakfire (0.99) [ 1 ][ DONE ] >>> lz4 (1.9.4) [ 9 ][ DONE ] >>> lzo (2.10) [ 14 ][ DONE ] >>> openvpn (2.5.9) [ 25 ][ DONE ] >>> mpage (2.5.7) [ 0 ][ DONE ] >>> dbus (1.14.10) [ 22 ][ DONE ] >>> intltool (0.51.0) [ 3 ][ DONE ] >>> libdaemon (0.14) [ 8 ][ DONE ] >>> avahi (0.8) [ 21 ][ DONE ] >>> cups (2.4.6) [ 26 ][ DONE ] >>> lcms2 (2.16) [ 8 ][ DONE ] >>> ghostscript (10.02.1) [ 35 ][ DONE ] >>> qpdf (11.7.0) [ 9 ][ DONE ] >>> poppler (24.01.0) [ 9 ][ DONE ] >>> poppler-data (0.4.12) [ 2 ][ DONE ] >>> cups-filters (1.28.16) [ 11 ][ DONE ] >>> epson-inkjet-printer-escpr (1.7.23) [ 9 ][ DONE ] >>> cups-pdf (3.0.1) [ 1 ][ DONE ] >>> foomatic (4.0.13) [ 2:00 ][ DONE ] >>> hplip (3.23.5) [ 16 ][ DONE ] >>> cifs-utils (7.0) [ 8 ][ DONE ] >>> krb5 (1.21.2) [ 30 ][ DONE ] >>> rpcsvc-proto (1.4.4) [ 3 ][ DONE ] >>> samba (4.19.3) [ 5:39 ][ DONE ] >>> netatalk (3.1.12) [ 26 ][ DONE ] >>> sudo (1.9.15p5) [ 28 ][ DONE ] >>> mc (4.8.30) [ 26 ][ DONE ] >>> wget (1.21.4) [ 41 ][ DONE ] >>> bridge-utils (1.5) [ 4 ][ DONE ] >>> smartmontools (7.4) [ 7 ][ DONE ] >>> htop (3.3.0) [ 10 ][ DONE ] >>> chkconfig (1.5) [ 0 ][ DONE ] >>> postfix (3.8.4) [ 14 ][ DONE ] >>> fetchmail (6.4.36) [ 9 ][ DONE ] >>> clamav (1.2.1) [ 50 ][ DONE ] >>> perl-NetAddr-IP (4.079) [ 15 ][ DONE ] >>> dma (0.13) [ 1 ][ DONE ] >>> alsa (1.2.10) [ 37 ][ DONE ] >>> mpfire [ 1 ][ DONE ] >>> guardian (2.0.2) [ 1 ][ DONE ] >>> libid3tag (0.15.1b) [ 6 ][ DONE ] >>> libmad (0.15.1b) [ 13 ][ DONE ] >>> libogg (1.3.5) [ 5 ][ DONE ] >>> libvorbis (1.3.7) [ 6 ][ DONE ] >>> flac (1.4.2) [ 13 ][ DONE ] >>> lame (3.100) [ 11 ][ DONE ] >>> soxr (0.1.3) [ 3 ][ DONE ] >>> libshout (2.4.6) [ 8 ][ DONE ] >>> xvid (1.3.7) [ 4 ][ DONE ] >>> libmpeg2 (0.4.1) [ 10 ][ DONE ] >>> gnump3d (3.0) [ 3 ][ DONE ] >>> rsync (3.2.7) [ 21 ][ DONE ] >>> rpcbind (1.2.6) [ 2 ][ DONE ] >>> keyutils (1.6.3) [ 1 ][ DONE ] >>> nfs (2.6.4) [ 21 ][ DONE ] >>> ncat (7.94) [ 40 ][ DONE ] >>> nmap (7.94) [ 47 ][ DONE ] >>> etherwake (1.09) [ 0 ][ DONE ] >>> bwm-ng (0.6.1-f54b3fa) [ 10 ][ DONE ] >>> sysstat (12.7.1) [ 4 ][ DONE ] >>> strongswan (5.9.13) [ 50 ][ DONE ] >>> rng-tools (6.16) [ 6 ][ DONE ] >>> lsof (4.99.3) [ 1 ][ DONE ] >>> br2684ctl [ 1 ][ DONE ] >>> lm_sensors (3-6-0) [ 1 ][ DONE ] >>> libstatgrab (0.92.1) [ 19 ][ DONE ] >>> liboping (1.3.4) [ 6 ][ DONE ] >>> collectd (4.10.9) [ 1:40 ][ DONE ] >>> git (2.43.0) [ 12 ][ DONE ] >>> linux-firmware (20231030) [ 49 ][ DONE ] >>> dvb-firmwares (20141125) [ 1 ][ DONE ] >>> zd1211-firmware (1.5) [ 1 ][ DONE ] >>> rpi-firmware (20211127) [ 0 ][ SKIP ] >>> intel-microcode (20231114) [ 1 ][ DONE ] >>> pcengines-apu-firmware (4.19.0.1) [ 1 ][ DONE ] >>> elinks (0.16.0) [ 10 ][ DONE ] >>> igmpproxy (0.4) [ 2 ][ DONE ] >>> opus (1.4) [ 8 ][ DONE ] >>> python3-toml (0.10.2) [ 2 ][ DONE ] >>> python3-pyproject2setuppy (22) [ 7 ][ DONE ] >>> python3-pyparsing (3.0.9) [ 2 ][ DONE ] >>> spice-protocol (0.14.3) [ 1 ][ DONE ] >>> spice (0.15.0) [ 31 ][ DONE ] >>> sdl2 (2.28.5) [ 18 ][ DONE ] >>> libusbredir (0.13.0) [ 3 ][ DONE ] >>> libseccomp (2.5.5) [ 5 ][ DONE ] >>> libslirp (4.7.0) [ 2 ][ DONE ] >>> qemu (8.1.2) [ 1:29 ][ DONE ] >>> netsnmpd (5.9.1) [ 3:17 ][ DONE ] >>> nagios_nrpe (4.1.0) [ 21 ][ DONE ] >>> nagios-plugins (2.3.3) [ 1:03 ][ DONE ] >>> icinga (1.11.4) [ 27 ][ DONE ] >>> observium-agent (23.1) [ 6 ][ DONE ] >>> ebtables (2.0.11) [ 5 ][ DONE ] >>> faad2 (2_10_0) [ 12 ][ DONE ] >>> alac (0.0.7) [ 11 ][ DONE ] >>> ffmpeg (6.0) [ 49 ][ DONE ] >>> vdr (2.4.7) [ 5 ][ DONE ] >>> vdr_streamdev (0.6.1) [ 5 ][ DONE ] >>> vdr_epgsearch (2.4.0+git20191101) [ 18 ][ DONE ] >>> vdr_dvbapi (2.2.5) [ 2 ][ DONE ] >>> vdr_eepg (master) [ 2 ][ DONE ] >>> w_scan (20170107) [ 4 ][ DONE ] >>> fmt (10.2.1) [ 3 ][ DONE ] >>> mpd (0.23.14) [ 9 ][ DONE ] >>> libmpdclient (2.19) [ 3 ][ DONE ] >>> mpc (0.34) [ 2 ][ DONE ] >>> perl-Net-CIDR-Lite (0.21) [ 1 ][ DONE ] >>> perl-Net-SMTP-SSL (1.04) [ 1 ][ DONE ] >>> perl-MIME-Base64 (3.16) [ 2 ][ DONE ] >>> perl-Authen-SASL (2.16) [ 1 ][ DONE ] >>> perl-MIME-Lite (3.033) [ 1 ][ DONE ] >>> perl-Email-Date-Format (1.005) [ 2 ][ DONE ] >>> vnstat (2.11) [ 5 ][ DONE ] >>> iw (5.19) [ 1 ][ DONE ] >>> wpa_supplicant (2.10) [ 3 ][ DONE ] >>> hostapd (2_10) [ 2 ][ DONE ] >>> syslinux (6.04-pre1) [ 9 ][ DONE ] >>> tftpd (5.2) [ 9 ][ DONE ] >>> cpufrequtils (008) [ 1 ][ DONE ] >>> gutenprint (5.3.4) [ 15 ][ DONE ] >>> apcupsd (3.14.14) [ 9 ][ DONE ] >>> fireperf (0.2.0) [ 10 ][ DONE ] >>> iperf (2.1.8) [ 8 ][ DONE ] >>> iperf3 (3.16) [ 6 ][ DONE ] >>> 7zip (17.05) [ 2 ][ DONE ] >>> lynis (3.0.9) [ 1 ][ DONE ] >>> sshfs (3.7.2) [ 2 ][ DONE ] >>> taglib (1.12) [ 3 ][ DONE ] >>> sslh (1.22c) [ 1 ][ DONE ] >>> perl-gettext (1.05) [ 2 ][ DONE ] >>> perl-Sort-Naturally (1.03) [ 1 ][ DONE ] >>> vdradmin (3.6.10) [ 2 ][ DONE ] >>> perl-DBI (1.631) [ 4 ][ DONE ] >>> perl-DBD-SQLite (1.40) [ 2 ][ DONE ] >>> perl-File-ReadBackwards (1.05) [ 1 ][ DONE ] >>> openvmtools (stable-12.0.5) [ 54 ][ DONE ] >>> joe (4.6) [ 12 ][ DONE ] >>> monit (5.33.0) [ 20 ][ DONE ] >>> nut (2.8.1) [ 41 ][ DONE ] >>> watchdog (5.16) [ 4 ][ DONE ] >>> usb_modeswitch (2.6.1) [ 1 ][ DONE ] >>> usb_modeswitch_data (20191128) [ 3 ][ DONE ] >>> zerofree (1.1.1) [ 1 ][ DONE ] >>> minicom (2.9) [ 6 ][ DONE ] >>> ddrescue (1.26) [ 1 ][ DONE ] >>> parted (3.6) [ 34 ][ DONE ] >>> swig (4.1.0) [ 15 ][ DONE ] >>> dtc (1.6.1) [ 0 ][ SKIP ] >>> u-boot (2022.10) [ 0 ][ SKIP ] >>> wireless-regdb (2023-05-03) [ 0 ][ DONE ] >>> ddns (014) [ 6 ][ DONE ] >>> python3-pycparser (2.21) [ 2 ][ DONE ] >>> python3-charset-normalizer (2.1.1) [ 2 ][ DONE ] >>> python3-certifi (2022.9.24) [ 1 ][ DONE ] >>> python3-idna (3.4) [ 2 ][ DONE ] >>> python3-requests (2.28.1) [ 2 ][ DONE ] >>> python3-tomli (2.0.1) [ 2 ][ DONE ] >>> python3-pep517 (0.13.0) [ 2 ][ DONE ] >>> python3-build (0.8.0) [ 2 ][ DONE ] >>> python3-install (0.0.3) [ 1 ][ DONE ] >>> python3-urllib3 (1.26.12) [ 2 ][ DONE ] >>> python3-flit (3.7.1) [ 3 ][ DONE ] >>> python3-packaging (23.2) [ 2 ][ DONE ] >>> python3-typing-extensions (4.4.0) [ 1 ][ DONE ] >>> python3-semantic-version (2.10.0) [ 2 ][ DONE ] >>> python3-setuptools-scm (7.0.5) [ 2 ][ DONE ] >>> python3-setuptools-rust (1.5.2) [ 2 ][ DONE ] >>> python3-six (1.16.0) [ 2 ][ DONE ] >>> python3-dateutil (2.8.2) [ 2 ][ DONE ] >>> python3-jmespath (1.0.1) [ 1 ][ DONE ] >>> python3-colorama (0.4.5) [ 2 ][ DONE ] >>> python3-yaml (6.0) [ 1 ][ DONE ] >>> python3-s3transfer (0.6.0) [ 2 ][ DONE ] >>> python3-rsa (4.9) [ 2 ][ DONE ] >>> python3-pyasn1 (0.4.8) [ 2 ][ DONE ] >>> python3-botocore (1.27.89) [ 7 ][ DONE ] >>> python3-cffi (1.15.1) [ 2 ][ DONE ] >>> python3-cryptography (38.0.1) [ 1:21 ][ DONE ] >>> python3-circuitbreaker (1.4.0) [ 2 ][ DONE ] >>> python3-pytz (2022.4) [ 5 ][ DONE ] >>> python3-click (8.1.3) [ 2 ][ DONE ] >>> python3-arrow (1.2.3) [ 3 ][ DONE ] >>> python3-terminaltables (3.1.10) [ 3 ][ DONE ] >>> python3-pkgconfig (1.5.5) [ 1 ][ DONE ] >>> python3-msgpack (1.0.7) [ 8 ][ DONE ] >>> python3-editables (0.5) [ 3 ][ DONE ] >>> python3-pathspec (0.12.1) [ 3 ][ DONE ] >>> python3-pluggy (1.4.0) [ 2 ][ DONE ] >>> python3-calver (2022.6.26) [ 2 ][ DONE ] >>> python3-trove-classifiers (2024.1.8) [ 1 ][ DONE ] >>> python3-hatchling (1.21.1) [ 3 ][ DONE ] >>> python3-hatch-vcs (0.4.0) [ 2 ][ DONE ] >>> python3-hatch-fancy-pypi-readme (24.1.0) [ 2 ][ DONE ] >>> python3-attrs (23.2.0) [ 2 ][ DONE ] >>> python3-sniffio (1.3.0) [ 2 ][ DONE ] >>> python3-sortedcontainers (2.4.0) [ 1 ][ DONE ] >>> python3-outcome (1.2.0) [ 2 ][ DONE ] >>> python3-async_generator (1.10) [ 2 ][ DONE ] >>> python3-flit_scm (1.7.0) [ 2 ][ DONE ] >>> python3-exceptiongroup (1.2.0) [ 2 ][ DONE ] >>> python3-trio (0.23.1) [ 3 ][ DONE ] >>> python3-pyfuse3 (3.3.0) [ 26 ][ DONE ] >>> aws-cli (1.27.100) [ 19 ][ DONE ] >>> oci-python-sdk (2.107.0) [ 1:30 ][ DONE ] >>> oci-cli (3.29.4) [ 21 ][ DONE ] >>> transmission (4.0.5) [ 24 ][ DONE ] >>> mtr (0.95) [ 7 ][ DONE ] >>> minidlna (1.3.3) [ 10 ][ DONE ] >>> acpid (2.0.34) [ 4 ][ DONE ] >>> fping (5.1) [ 3 ][ DONE ] >>> telnet (0.17) [ 3 ][ DONE ] >>> xinetd (2.3.15.4) [ 5 ][ DONE ] >>> stress (1.0.7) [ 6 ][ DONE ] >>> sarg (2.4.0) [ 10 ][ DONE ] >>> nginx (1.24.0) [ 11 ][ DONE ] >>> sysbench (1.0.20) [ 19 ][ DONE ] >>> strace (6.6) [ 40 ][ DONE ] >>> ltrace (0.7.3) [ 9 ][ DONE ] >>> ipfire-netboot (v2.0) [ 15 ][ DONE ] >>> lcdproc (0e2ce9b) [ 13 ][ DONE ] >>> keepalived (2.2.8) [ 13 ][ DONE ] >>> ipvsadm (1.31) [ 1 ][ DONE ] >>> perl-Carp-Clan (6.08) [ 2 ][ DONE ] >>> perl-Date-Calc (6.4) [ 1 ][ DONE ] >>> perl-Date-Manip (6.86) [ 12 ][ DONE ] >>> perl-File-Tail (1.3) [ 1 ][ DONE ] >>> perl-TimeDate (2.33) [ 2 ][ DONE ] >>> swatch (3.2.4) [ 1 ][ DONE ] >>> tor (0.4.8.10) [ 37 ][ DONE ] >>> wavemon (0.9.5) [ 4 ][ DONE ] >>> iptraf-ng (1.2.1) [ 1 ][ DONE ] >>> iotop (1.22) [ 3 ][ DONE ] >>> stunnel (5.71) [ 9 ][ DONE ] >>> bacula (11.0.6) [ 38 ][ DONE ] >>> perl-Font-TTF (1.06) [ 2 ][ DONE ] >>> perl-IO-String (1.08) [ 2 ][ DONE ] >>> perl-PDF-API2 (2.033) [ 2 ][ DONE ] >>> proxy-accounting (1.0.4) [ 1 ][ DONE ] >>> tmux (3.3a) [ 9 ][ DONE ] >>> perl-Text-CSV_XS (1.12) [ 1 ][ DONE ] >>> lua (5.4.6) [ 1 ][ DONE ] >>> haproxy (2.9.2) [ 2 ][ DONE ] >>> ipset (7.19) [ 8 ][ DONE ] >>> dnsdist (1.8.0) [ 27 ][ DONE ] >>> bird (2.14) [ 10 ][ DONE ] >>> libyang (2.1.148) [ 5 ][ DONE ] >>> frr (9.1) [ 17 ][ FAIL ] >>> >>> checking for netinet/in_var.h... no >>> checking for net/if_dl.h... no >>> checking for net/netopt.h... no >>> checking for inet/nd.h... no >>> checking for netinet/ip_icmp.h... yes >>> checking for sys/sysctl.h... no >>> checking for sys/sockio.h... no >>> checking for sys/conf.h... no >>> checking for ucontext.h... yes >>> checking for ucontext_t.uc_mcontext.uc_regs... no >>> checking for ucontext_t.uc_mcontext.regs... no >>> checking for ucontext_t.uc_mcontext.gregs... yes >>> checking which operating system interface to use... Linux >>> checking for special C compiler options needed for large files... no >>> checking for _FILE_OFFSET_BITS value needed for large files... no >>> checking for strlcat... yes >>> checking for strlcpy... yes >>> checking for getgrouplist... yes >>> checking for openat... yes >>> checking for unlinkat... yes >>> checking for posix_fallocate... yes >>> checking for sendmmsg... yes >>> checking for explicit_bzero... yes >>> checking for struct mmsghdr.msg_hdr... yes >>> checking for protoc... no >>> checking for protoc-c... no >>> configure: error: in `/usr/src/frr-frr-9.1': >>> configure: error: protobuf requested but protoc-c not found. Install protobuf-c. >>> See `config.log' for more details >>> make: *** [frr:88: /usr/src/log/frr-frr-9.1] Error 1 >>> >>> ERROR: Building frr [ FAIL ] >>> Check /build/nightly/next/log/_build.ipfire.log for errors if applicable[ FAIL ] >> > > -- > Sent from my laptop >

1 0

Re: IPFire 2.29 - Core Update 183 is available for testing
by Adolf Belka 30 Jan '24

30 Jan '24

Hi All, First feedback is that the email notification of the Testing Release is great. The old version was always a bit dull and on my mobile it always ended up with dark writing on a dark background. Now the email notification looks the same on my desktop and my mobile and is much more eye catching. On the top of the WUI page the IPFire_ has replaced the fiery penguin but the underscoring indicating that it is a link ends up going above the underscore character. Was that intended? It's not a big thing and I can live with it no problems but it did just look a bit peculiar at first glance. The upgrade process went fine, including the reboot. Everything cam back with no issues. Will now start to look at the various screens and test things out. Regards, Adolf. On 23/01/2024 11:55, IPFire Project wrote: > It is time for testing the next version of IPFire - and it is going to be a big one: A new major version - IPFire 2.29 - Core Update 183. There is an update of the design of the web user interface, a fresh kernel based on Linux 6.6, a lot of package updates and improvements and bug fixes throughout the entire system. > ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ > > > IPFire_ > > > IPFire 2.29 - Core Update 183 is available for testing > > It is time for testing the next version of IPFire - and it is going to be a big one: A new major version - IPFire 2.29 - Core Update 183. There is an update of the design of the web user interface, a fresh kernel based on Linux 6.6, a lot of package updates and improvements and bug fixes throughout the entire system. > > Read The Full Post On Our Blog <https://www.ipfire.org/blog/ipfire-2-29-core-update-183-is-available-for-te…> > > The IPFire Project, c/o Lightning Wire Labs GmbH, Gerhardstraße 8, 45711 Datteln, Germany > > Unsubscribe <https://www.ipfire.org/unsubscribe> >

2 7

[PATCH] vnstat: Update to 2.12
by Matthias Fischer 29 Jan '24

29 Jan '24

For details see: https://humdi.net/vnstat/CHANGES "2.12 / 21-Jan-2024 - Fixed - QueryMode documentation in configuration file didn't match implementation or man page description - Daemon didn't try to import legacy databases when --noadd was used and no current version database initially existed resulting in the process exiting even when something could have been done - Daemon didn't try to import legacy databases when --initdb was used and no current version database initially existed, this behaviour can still be enabled by using --noadd in combination with --initdb - Using --nodaemon and --initdb at the same time didn't result in an error being shown - New - Add 95th percentile output as --95th, also available via --alert, --json, --xml and image output, requires 5MinuteHours configuration to be set to at least 744 for storing all the necessary data - Add --json support for --alert - Database queries resulting in error exit with status 1 - Show spinning animation at the beginning of -l / --live output line, visibility configurable using LiveSpinner configuration option - Add -ic / --invert-colors option to image output for facilitating for example dark mode switching without needing to have multiple separate color configurations - Add dark mode option to image output example cgi (examples/vnstat.cgi) - Add option 4 to QueryMode for selecting summary output of single interface regardless of the number of interfaces in the database - Add optional mode parameter to -q / --query for overriding QueryMode for summary output and for enabling control of summary output style regardless of the number of interfaces in the database - Add --startempty option to daemon for starting and keeping the daemon running even if no interfaces were discovered and the database is empty - Add --noremove option to daemon for disabling the automatic removal of interfaces from database that aren't currently visible and haven't seen any traffic - Add third mode option to --iflist and --dbiflist for getting only the interface count as output" Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/vnstat | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lfs/vnstat b/lfs/vnstat index ca61562c0..c47833a14 100644 --- a/lfs/vnstat +++ b/lfs/vnstat @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 2.11 +VER = 2.12 THISAPP = vnstat-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 6eeed45d628641c9d88cf33ae1fc14871109b1e9fd0ac4a46fe8e2c194bb4600878b69408ed177bcde38ca859d0a3165d0095cab9b0bb6c036f7788fbfcb47e6 +$(DL_FILE)_BLAKE2 = af6982bc6da66ed2cebfe99e1b46a540528886d1c6e7a5174a3083a315804cb42c2395f3a0f5df552e8fd6b7823a01873fc5f9fb2178529c53481a67552dab35 install : $(TARGET) -- 2.34.1

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development January 2024