Development July 2019

development@lists.ipfire.org

9 participants
32 discussions

[PATCH] kernel: update to 5.1
by Arne Fitzenreiter 08 Jul '19

08 Jul '19

Signed-off-by: Arne Fitzenreiter <arne_f(a)ipfire.org> --- kernel/config-arm-generic | 38 +++++++------ kernel/config-arm32-generic | 38 +++++++++++-- kernel/config-arm64-generic | 37 +++++++++---- kernel/config-generic | 132 ++++++++++++++++++++++++++++---------------- kernel/config-x86-generic | 33 ++++++----- kernel/kernel.nm | 4 +- 6 files changed, 182 insertions(+), 100 deletions(-) diff --git a/kernel/config-arm-generic b/kernel/config-arm-generic index 1a49710..12e3827 100644 --- a/kernel/config-arm-generic +++ b/kernel/config-arm-generic @@ -77,7 +77,6 @@ CONFIG_ARM_SCMI_POWER_DOMAIN=m CONFIG_ARM_SCPI_PROTOCOL=m CONFIG_ARM_SCPI_POWER_DOMAIN=m # CONFIG_FIRMWARE_MEMMAP is not set -# CONFIG_INTEL_STRATIX10_SERVICE is not set # # Tegra firmware driver @@ -118,17 +117,6 @@ CONFIG_PCI_SYSCALL=y # Firmware loader # CONFIG_SOC_BUS=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 CONFIG_GENERIC_ARCH_TOPOLOGY=y # @@ -411,7 +399,10 @@ CONFIG_DVB_LNBP21=y # I2C encoder or helper chips # # CONFIG_DRM_I2C_NXP_TDA998X is not set -CONFIG_DRM_ARM=y + +# +# ARM devices +# CONFIG_DRM_HDLCD=m # CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set CONFIG_DRM_MALI_DISPLAY=m @@ -463,6 +454,7 @@ CONFIG_SND_SOC_FSL_ESAI=m CONFIG_SND_SOC_IMX_AUDMUX=m CONFIG_SND_I2S_HI6210_I2S=m # CONFIG_SND_SOC_IMG is not set +CONFIG_SND_SOC_MTK_BTCVSD=m # # ASoC support for Amlogic platforms @@ -482,6 +474,8 @@ CONFIG_SND_MESON_AXG_PDM=m # # STMicroelectronics STM32 SOC audio support # +CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m +CONFIG_SND_SOC_XILINX_SPDIF=m CONFIG_ZX_TDM=m CONFIG_SND_SOC_I2C_AND_SPI=m @@ -509,6 +503,7 @@ CONFIG_SND_SOC_CS35L32=m CONFIG_SND_SOC_CS35L33=m CONFIG_SND_SOC_CS35L34=m CONFIG_SND_SOC_CS35L35=m +CONFIG_SND_SOC_CS35L36=m CONFIG_SND_SOC_CS42L42=m CONFIG_SND_SOC_CS42L51=m CONFIG_SND_SOC_CS42L51_I2C=m @@ -522,6 +517,7 @@ CONFIG_SND_SOC_CS4271_I2C=m CONFIG_SND_SOC_CS42XX8=m CONFIG_SND_SOC_CS42XX8_I2C=m CONFIG_SND_SOC_CS43130=m +CONFIG_SND_SOC_CS4341=m CONFIG_SND_SOC_CS4349=m CONFIG_SND_SOC_CS53L30=m CONFIG_SND_SOC_DA7219=m @@ -556,6 +552,7 @@ CONFIG_SND_SOC_PCM3168A=m CONFIG_SND_SOC_PCM3168A_I2C=m CONFIG_SND_SOC_PCM512x=m CONFIG_SND_SOC_PCM512x_I2C=m +CONFIG_SND_SOC_RK3328=m CONFIG_SND_SOC_RL6231=m CONFIG_SND_SOC_RT5616=m CONFIG_SND_SOC_RT5631=m @@ -606,6 +603,7 @@ CONFIG_SND_SOC_WM8782=m CONFIG_SND_SOC_WM8804=m CONFIG_SND_SOC_WM8804_I2C=m CONFIG_SND_SOC_WM8903=m +CONFIG_SND_SOC_WM8904=m CONFIG_SND_SOC_WM8960=m CONFIG_SND_SOC_WM8962=m CONFIG_SND_SOC_WM8974=m @@ -614,6 +612,7 @@ CONFIG_SND_SOC_WM8985=m CONFIG_SND_SOC_ZX_AUD96P22=m CONFIG_SND_SOC_MAX9759=m CONFIG_SND_SOC_MT6351=m +CONFIG_SND_SOC_MT6358=m CONFIG_SND_SOC_NAU8540=m CONFIG_SND_SOC_NAU8810=m CONFIG_SND_SOC_NAU8822=m @@ -621,9 +620,7 @@ CONFIG_SND_SOC_NAU8824=m CONFIG_SND_SOC_TPA6130A2=m CONFIG_SND_SIMPLE_CARD_UTILS=m CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m -CONFIG_SND_AUDIO_GRAPH_SCU_CARD=m # # USB Physical Layer drivers @@ -663,6 +660,7 @@ CONFIG_RTC_DRV_PL031=m # CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y # CONFIG_AMBA_PL08X is not set +CONFIG_FSL_QDMA=m # CONFIG_PL330_DMA is not set CONFIG_XILINX_DMA=m CONFIG_XILINX_ZYNQMP_DMA=m @@ -681,8 +679,12 @@ CONFIG_COMMON_CLK_SCMI=m CONFIG_COMMON_CLK_SCPI=m CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=m -CONFIG_COMMON_CLK_AMLOGIC=y -CONFIG_COMMON_CLK_REGMAP_MESON=y +CONFIG_COMMON_CLK_MESON_REGMAP=y +CONFIG_COMMON_CLK_MESON_MPLL=y +CONFIG_COMMON_CLK_MESON_PHASE=m +CONFIG_COMMON_CLK_MESON_PLL=y +CONFIG_COMMON_CLK_MESON_SCLK_DIV=m +CONFIG_COMMON_CLK_AXG_AUDIO=m # # Clock Source drivers @@ -776,6 +778,8 @@ CONFIG_MESON_MX_EFUSE=m # Library routines # CONFIG_ZLIB_DEFLATE=m +CONFIG_ARCH_HAS_SETUP_DMA_OPS=y +CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y CONFIG_DMA_REMAP=y # diff --git a/kernel/config-arm32-generic b/kernel/config-arm32-generic index 28be4dc..54f4a2e 100644 --- a/kernel/config-arm32-generic +++ b/kernel/config-arm32-generic @@ -9,9 +9,13 @@ CONFIG_KERNEL_XZ=y # CONFIG_KERNEL_LZ4 is not set # -# RCU Subsystem +# Timers subsystem # CONFIG_CONTEXT_TRACKING_FORCE=y + +# +# RCU Subsystem +# CONFIG_PERF_USE_VMALLOC=y # @@ -153,10 +157,12 @@ CONFIG_ARCH_MEDIATEK=y CONFIG_MACH_MT6589=y CONFIG_MACH_MT6592=y CONFIG_MACH_MT7623=y +CONFIG_MACH_MT7629=y CONFIG_MACH_MT8127=y CONFIG_MACH_MT8135=y CONFIG_MACH_MESON6=y CONFIG_MACH_MESON8=y +# CONFIG_ARCH_MILBEAUT is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_NPCM is not set CONFIG_ARCH_OMAP=y @@ -380,7 +386,7 @@ CONFIG_ARM_OMAP2PLUS_CPUFREQ=y CONFIG_ARM_QCOM_CPUFREQ_HW=m CONFIG_ARM_STI_CPUFREQ=m CONFIG_ARM_TEGRA20_CPUFREQ=y -CONFIG_ARM_TEGRA124_CPUFREQ=m +CONFIG_ARM_TEGRA124_CPUFREQ=y CONFIG_ARM_TI_CPUFREQ=y # @@ -439,6 +445,7 @@ CONFIG_CRYPTO_CRC32_ARM_CE=m # General architecture-dependent options # CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_32BIT_OFF_T=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_ARCH_MMAP_RND_BITS=16 @@ -495,6 +502,8 @@ CONFIG_PCIE_ROCKCHIP_HOST=m # # DesignWare PCI Core Support # +CONFIG_PCI_DRA7XX=y +CONFIG_PCI_DRA7XX_HOST=y CONFIG_PCI_IMX6=y CONFIG_PCI_KEYSTONE=y CONFIG_PCI_LAYERSCAPE=y @@ -526,6 +535,7 @@ CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # Misc devices # # CONFIG_QCOM_COINCELL is not set +# CONFIG_QCOM_FASTRPC is not set CONFIG_SRAM_EXEC=y # @@ -594,6 +604,7 @@ CONFIG_AX88796_93CX6=y CONFIG_SMC911X=m CONFIG_DWMAC_IPQ806X=m CONFIG_DWMAC_MEDIATEK=m +CONFIG_DWMAC_QCOM_ETHQOS=m CONFIG_DWMAC_ROCKCHIP=m CONFIG_DWMAC_STI=m CONFIG_DWMAC_SUNXI=m @@ -601,7 +612,6 @@ CONFIG_DWMAC_SUN8I=m CONFIG_TI_DAVINCI_EMAC=m CONFIG_TI_DAVINCI_MDIO=m CONFIG_TI_DAVINCI_CPDMA=m -CONFIG_TI_CPSW_PHY_SEL=y CONFIG_TI_CPSW=m # CONFIG_TI_CPTS is not set CONFIG_NET_VENDOR_XILINX=y @@ -818,6 +828,7 @@ CONFIG_PINCTRL_MTK=y CONFIG_PINCTRL_MTK_MOORE=y # CONFIG_PINCTRL_MT2701 is not set CONFIG_PINCTRL_MT7623=y +CONFIG_PINCTRL_MT7629=y CONFIG_PINCTRL_MT8135=y CONFIG_PINCTRL_MT8127=y CONFIG_PINCTRL_MT6397=y @@ -878,6 +889,7 @@ CONFIG_MTK_THERMAL=m # CONFIG_BRCMSTB_THERMAL=m CONFIG_BCM_NS_THERMAL=y +CONFIG_BCM_SR_THERMAL=y # # Texas Instruments thermal drivers @@ -1129,8 +1141,6 @@ CONFIG_DRM_DW_MIPI_DSI=m CONFIG_DRM_V3D=m CONFIG_DRM_VC4=m CONFIG_DRM_VC4_HDMI_CEC=y -CONFIG_DRM_ETNAVIV=m -CONFIG_DRM_ETNAVIV_THERMAL=y CONFIG_DRM_MEDIATEK=m CONFIG_DRM_MEDIATEK_HDMI=m # CONFIG_DRM_TVE200 is not set @@ -1177,6 +1187,7 @@ CONFIG_SND_DESIGNWARE_PCM=y # # Common SoC Audio options for Freescale CPUs: # +# CONFIG_SND_SOC_FSL_MICFIL is not set CONFIG_SND_SOC_FSL_UTILS=m CONFIG_SND_SOC_IMX_PCM_DMA=m CONFIG_SND_IMX_SOC=m @@ -1200,6 +1211,7 @@ CONFIG_SND_SOC_MT8173_MAX98090=m CONFIG_SND_SOC_MT8173_RT5650=m CONFIG_SND_SOC_MT8173_RT5650_RT5514=m CONFIG_SND_SOC_MT8173_RT5650_RT5676=m +CONFIG_SND_SOC_MT8183=m # # ASoC support for Amlogic platforms @@ -1318,6 +1330,7 @@ CONFIG_USB_DWC3_QCOM=m CONFIG_KEYSTONE_USB_PHY=m CONFIG_AM335X_CONTROL_USB=m CONFIG_AM335X_PHY_USB=m +CONFIG_TWL6030_USB=m CONFIG_USB_MXS_PHY=m CONFIG_USB_TEGRA_PHY=y @@ -1371,6 +1384,7 @@ CONFIG_RTC_DRV_CMOS=y # on-CPU RTC drivers # CONFIG_RTC_DRV_IMXDI=m +CONFIG_RTC_DRV_MESON=m CONFIG_RTC_DRV_OMAP=m CONFIG_RTC_DRV_S3C=m # CONFIG_RTC_DRV_VT8500 is not set @@ -1459,6 +1473,7 @@ CONFIG_COMMON_CLK_MT7629_ETHSYS=y CONFIG_COMMON_CLK_MT7629_HIFSYS=y CONFIG_COMMON_CLK_MT8135=y CONFIG_COMMON_CLK_MT8173=y +CONFIG_COMMON_CLK_MESON_INPUT=m CONFIG_COMMON_CLK_MESON8B=y CONFIG_KRAIT_CLOCKS=y CONFIG_QCOM_GDSC=y @@ -1513,6 +1528,7 @@ CONFIG_SUN8I_R40_CCU=y CONFIG_SUN9I_A80_CCU=y CONFIG_SUN8I_R_CCU=y CONFIG_TEGRA_CLK_EMC=y +CONFIG_TEGRA_CLK_DFLL=y CONFIG_COMMON_CLK_TI_ADPLL=m # CONFIG_HWSPINLOCK_OMAP is not set CONFIG_HWSPINLOCK_QCOM=m @@ -1610,6 +1626,11 @@ CONFIG_BRCMSTB_PM=y CONFIG_FSL_GUTS=y # +# i.MX SoC drivers +# +# CONFIG_IMX_GPCV2_PM_DOMAINS is not set + +# # MediaTek SoC drivers # CONFIG_MTK_CMDQ=m @@ -1713,7 +1734,8 @@ CONFIG_PWM_BCM_IPROC=y CONFIG_PWM_BERLIN=m CONFIG_PWM_BRCMSTB=m CONFIG_PWM_HIBVT=m -# CONFIG_PWM_IMX is not set +CONFIG_PWM_IMX1=m +CONFIG_PWM_IMX27=m # CONFIG_PWM_MTK_DISP is not set CONFIG_PWM_MEDIATEK=m CONFIG_PWM_OMAP_DMTIMER=m @@ -1741,6 +1763,7 @@ CONFIG_IRQ_CROSSBAR=y CONFIG_IMX_IRQSTEER=y CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_RESET_BERLIN=y +CONFIG_RESET_BRCMSTB=y CONFIG_RESET_QCOM_AOSS=y CONFIG_RESET_QCOM_PDC=m CONFIG_RESET_SIMPLE=y @@ -1756,6 +1779,7 @@ CONFIG_COMMON_RESET_HI6220=m # PHY Subsystem # CONFIG_PHY_SUN4I_USB=m +CONFIG_PHY_SUN6I_MIPI_DPHY=m CONFIG_PHY_SUN9I_USB=m CONFIG_PHY_BCM_NS_USB2=m CONFIG_PHY_BCM_NS_USB3=m @@ -1795,6 +1819,8 @@ CONFIG_PHY_STIH407_USB=m CONFIG_PHY_TEGRA_XUSB=m CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_CONTROL_PHY=m +CONFIG_OMAP_USB2=m +CONFIG_TI_PIPE3=m CONFIG_TWL4030_USB=m CONFIG_PHY_TI_GMII_SEL=m diff --git a/kernel/config-arm64-generic b/kernel/config-arm64-generic index 0b6b413..87ef8d1 100644 --- a/kernel/config-arm64-generic +++ b/kernel/config-arm64-generic @@ -1,9 +1,13 @@ CONFIG_THREAD_INFO_IN_TASK=y # -# RCU Subsystem +# Timers subsystem # # CONFIG_CONTEXT_TRACKING_FORCE is not set + +# +# RCU Subsystem +# CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_SUPPORTS_INT128=y # CONFIG_NUMA_BALANCING is not set @@ -33,6 +37,7 @@ CONFIG_ARCH_PROC_KCORE_TEXT=y # CONFIG_ARCH_SUNXI is not set # CONFIG_ARCH_BCM_IPROC is not set # CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BITMAIN is not set # CONFIG_ARCH_BRCMSTB is not set # CONFIG_ARCH_EXYNOS is not set # CONFIG_ARCH_K3 is not set @@ -82,6 +87,7 @@ CONFIG_QCOM_QDF2400_ERRATUM_0065=y # CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set # CONFIG_HISILICON_ERRATUM_161600802 is not set CONFIG_QCOM_FALKOR_ERRATUM_E1041=y +CONFIG_FUJITSU_ERRATUM_010001=y # CONFIG_ARM64_4K_PAGES is not set # CONFIG_ARM64_16K_PAGES is not set CONFIG_ARM64_64K_PAGES=y @@ -139,6 +145,7 @@ CONFIG_ARM64_CNP=y CONFIG_ARM64_PTR_AUTH=y CONFIG_ARM64_SVE=y CONFIG_ARM64_MODULE_PLTS=y +# CONFIG_ARM64_PSEUDO_NMI is not set CONFIG_RELOCATABLE=y CONFIG_RANDOMIZE_BASE=y CONFIG_RANDOMIZE_MODULE_REGION_FULL=y @@ -183,6 +190,7 @@ CONFIG_EFI_ARMSTUB_DTB_LOADER=y # CONFIG_EFI_CAPSULE_LOADER is not set # CONFIG_EFI_TEST is not set # CONFIG_RESET_ATTACK_MITIGATION is not set +CONFIG_EFI_EARLYCON=y # # Tegra firmware driver @@ -258,8 +266,8 @@ CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ARCH_MMAP_RND_BITS=27 CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y CONFIG_VMAP_STACK=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y # # GCOV-based kernel profiling @@ -367,6 +375,7 @@ CONFIG_HOTPLUG_PCI_ACPI_IBM=y CONFIG_PCI_FTPCI100=y CONFIG_PCI_XGENE=y CONFIG_PCI_XGENE_MSI=y +# CONFIG_PCIE_ALTERA is not set CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y @@ -469,6 +478,7 @@ CONFIG_HVC_DCC=y CONFIG_IPMI_DMI_DECODE=y CONFIG_HW_RANDOM_XGENE=m CONFIG_HW_RANDOM_CAVIUM=y +CONFIG_HW_RANDOM_OPTEE=m # # I2C support @@ -595,6 +605,11 @@ CONFIG_DUMMY_CONSOLE_ROWS=25 # CONFIG_SND_DESIGNWARE_PCM is not set # +# Common SoC Audio options for Freescale CPUs: +# +CONFIG_SND_SOC_FSL_MICFIL=m + +# # STMicroelectronics STM32 SOC audio support # # CONFIG_SND_SOC_XILINX_I2S is not set @@ -643,11 +658,6 @@ CONFIG_MV_XOR_V2=y CONFIG_XGENE_DMA=m # -# DMA Clients -# -CONFIG_DMA_ENGINE_RAID=y - -# # Xen driver support # CONFIG_XEN_EFI=y @@ -656,11 +666,14 @@ CONFIG_XEN_EFI=y # Common Clock Framework # CONFIG_COMMON_CLK_XGENE=y -CONFIG_COMMON_CLK_AMLOGIC_AUDIO=y -CONFIG_COMMON_CLK_MESON_AO=y +CONFIG_COMMON_CLK_MESON_INPUT=y +CONFIG_COMMON_CLK_MESON_DUALDIV=y +CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y +CONFIG_COMMON_CLK_MESON_AO_CLKC=y +CONFIG_COMMON_CLK_MESON_EE_CLKC=y CONFIG_COMMON_CLK_GXBB=y CONFIG_COMMON_CLK_AXG=y -CONFIG_COMMON_CLK_AXG_AUDIO=m +CONFIG_COMMON_CLK_G12A=y # # Clock Source drivers @@ -790,6 +803,10 @@ CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y CONFIG_DMA_DIRECT_REMAP=y + +# +# Default contiguous memory area size: +# CONFIG_UCS2_STRING=y CONFIG_SG_SPLIT=y CONFIG_ARCH_HAS_PMEM_API=y diff --git a/kernel/config-generic b/kernel/config-generic index ed45e1b..fcda84c 100644 --- a/kernel/config-generic +++ b/kernel/config-generic @@ -7,6 +7,7 @@ CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=80200 CONFIG_CLANG_VERSION=0 CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -58,6 +59,7 @@ CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set # CONFIG_NO_HZ_IDLE is not set CONFIG_NO_HZ_FULL=y +CONFIG_CONTEXT_TRACKING=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_NONE=y @@ -90,7 +92,6 @@ CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_CONTEXT_TRACKING=y CONFIG_RCU_NOCB_CPU=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 @@ -160,6 +161,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y @@ -278,6 +280,7 @@ CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_IDLE_GOV_TEO is not set # # Bus options (PCI etc.) @@ -342,6 +345,7 @@ CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y @@ -359,6 +363,8 @@ CONFIG_GCC_PLUGINS=y # CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y CONFIG_GCC_PLUGIN_STRUCTLEAK=y +# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y # CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set CONFIG_GCC_PLUGIN_RANDSTRUCT=y @@ -487,6 +493,7 @@ CONFIG_SKB_EXTENSIONS=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y +CONFIG_UNIX_SCM=y CONFIG_UNIX_DIAG=m CONFIG_TLS=m CONFIG_TLS_DEVICE=y @@ -625,7 +632,7 @@ CONFIG_NF_CONNTRACK_TIMEOUT=y CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CONNTRACK_LABELS=y CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_GRE=y CONFIG_NF_CT_PROTO_SCTP=y CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m @@ -651,6 +658,7 @@ CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_REDIRECT=y +CONFIG_NF_NAT_MASQUERADE=y CONFIG_NF_TABLES=m CONFIG_NF_TABLES_SET=m CONFIG_NF_TABLES_INET=y @@ -848,11 +856,6 @@ CONFIG_NF_DUP_IPV4=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_IPV4=m -CONFIG_NF_NAT_MASQUERADE_IPV4=y -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m @@ -868,9 +871,6 @@ CONFIG_NF_SOCKET_IPV6=m CONFIG_NF_TPROXY_IPV6=m CONFIG_NF_TABLES_IPV6=y CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m CONFIG_NFT_REJECT_IPV6=m CONFIG_NFT_DUP_IPV6=m CONFIG_NFT_FIB_IPV6=m @@ -878,8 +878,6 @@ CONFIG_NF_FLOW_TABLE_IPV6=m CONFIG_NF_DUP_IPV6=m CONFIG_NF_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m -CONFIG_NF_NAT_IPV6=m -CONFIG_NF_NAT_MASQUERADE_IPV6=y # CONFIG_IP6_NF_IPTABLES is not set CONFIG_NF_DEFRAG_IPV6=y CONFIG_NF_TABLES_BRIDGE=y @@ -1114,7 +1112,6 @@ CONFIG_GRO_CELLS=y CONFIG_SOCK_VALIDATE_XMIT=y CONFIG_NET_SOCK_MSG=y CONFIG_NET_DEVLINK=y -CONFIG_MAY_USE_DEVLINK=y CONFIG_FAILOVER=m CONFIG_HAVE_EBPF_JIT=y @@ -1136,6 +1133,7 @@ CONFIG_PCIEASPM_DEFAULT=y CONFIG_PCIE_PME=y # CONFIG_PCIE_DPC is not set # CONFIG_PCIE_PTM is not set +# CONFIG_PCIE_BW is not set CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y CONFIG_PCI_QUIRKS=y @@ -1328,6 +1326,7 @@ CONFIG_ALTERA_STAPL=m # # VOP Bus Driver # +# CONFIG_VOP_BUS is not set # # Intel MIC Host Driver @@ -1352,6 +1351,7 @@ CONFIG_ALTERA_STAPL=m CONFIG_MISC_ALCOR_PCI=m # CONFIG_MISC_RTSX_PCI is not set CONFIG_MISC_RTSX_USB=m +# CONFIG_HABANA_AI is not set # # SCSI device support @@ -1443,6 +1443,7 @@ CONFIG_LIBFCOE=m CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set CONFIG_SCSI_DMX3191D=m +CONFIG_SCSI_GDTH=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m @@ -1476,10 +1477,6 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m -CONFIG_SCSI_OSD_DPRINT_SENSE=1 -# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y @@ -1612,6 +1609,7 @@ CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_DELAY is not set +# CONFIG_DM_INIT is not set CONFIG_DM_UEVENT=y # CONFIG_DM_FLAKEY is not set CONFIG_DM_VERITY=m @@ -1637,6 +1635,7 @@ CONFIG_IFB=m # CONFIG_NET_TEAM is not set CONFIG_MACVLAN=m CONFIG_MACVTAP=m +CONFIG_IPVLAN_L3S=y CONFIG_IPVLAN=m CONFIG_IPVTAP=m CONFIG_VXLAN=m @@ -1908,6 +1907,7 @@ CONFIG_DWC_XLGMAC_PCI=m CONFIG_NET_VENDOR_TEHUTI=y CONFIG_TEHUTI=m CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_PHY_SEL is not set CONFIG_TI_CPSW_ALE=m CONFIG_TLAN=m CONFIG_NET_VENDOR_VIA=y @@ -1927,6 +1927,7 @@ CONFIG_MDIO_BCM_UNIMAC=m CONFIG_MDIO_BITBANG=m CONFIG_MDIO_BUS_MUX_GPIO=m CONFIG_MDIO_BUS_MUX_MMIOREG=m +CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m # CONFIG_MDIO_GPIO is not set CONFIG_MDIO_HISI_FEMAC=m CONFIG_MDIO_I2C=m @@ -2197,6 +2198,7 @@ CONFIG_MT76x0E=m CONFIG_MT76x2_COMMON=m CONFIG_MT76x2E=m CONFIG_MT76x2U=m +CONFIG_MT7603E=m CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m @@ -2354,6 +2356,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_ATMEL_CAPTOUCH is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MSM_VIBRATOR is not set # CONFIG_INPUT_MAX8925_ONKEY is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_GP2A is not set @@ -2385,6 +2388,7 @@ CONFIG_INPUT_SOC_BUTTON_ARRAY=m CONFIG_INPUT_DRV260X_HAPTICS=m CONFIG_INPUT_DRV2665_HAPTICS=m CONFIG_INPUT_DRV2667_HAPTICS=m +CONFIG_INPUT_STPMIC1_ONKEY=m CONFIG_RMI4_CORE=m CONFIG_RMI4_I2C=m # CONFIG_RMI4_SMB is not set @@ -2433,6 +2437,7 @@ CONFIG_SERIAL_NONSTANDARD=y CONFIG_N_HDLC=m CONFIG_N_GSM=m # CONFIG_TRACE_SINK is not set +CONFIG_LDISC_AUTOLOAD=y CONFIG_DEVMEM=y # @@ -2479,6 +2484,7 @@ CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y CONFIG_VIRTIO_CONSOLE=m CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_PLAT_DATA=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m @@ -2488,7 +2494,6 @@ CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_R3964=m # CONFIG_APPLICOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 @@ -2650,6 +2655,7 @@ CONFIG_GPIO_MB86S7X=m CONFIG_GPIO_MOCKUP=m CONFIG_GPIO_SAMA5D2_PIOBU=m CONFIG_GPIO_SYSCON=m +CONFIG_GPIO_AMD_FCH=m # # Port-mapped I/O GPIO drivers @@ -2660,6 +2666,7 @@ CONFIG_GPIO_SYSCON=m # # CONFIG_GPIO_ADP5588 is not set CONFIG_GPIO_ADNP=m +CONFIG_GPIO_GW_PLD=m # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set @@ -2684,6 +2691,7 @@ CONFIG_GPIO_TPS65218=m # CONFIG_GPIO_TPS6586X is not set # CONFIG_GPIO_TPS65910 is not set # CONFIG_GPIO_TPS65912 is not set +# CONFIG_GPIO_TQMX86 is not set # CONFIG_GPIO_TWL4030 is not set # CONFIG_GPIO_TWL6040 is not set # CONFIG_GPIO_WM831X is not set @@ -2972,6 +2980,7 @@ CONFIG_TWL4030_WATCHDOG=m CONFIG_MAX63XX_WATCHDOG=m CONFIG_MAX77620_WATCHDOG=m CONFIG_RETU_WATCHDOG=m +CONFIG_STPMIC1_WATCHDOG=m CONFIG_ALIM7101_WDT=m CONFIG_I6300ESB_WDT=m CONFIG_KEMPLD_WDT=m @@ -3107,6 +3116,8 @@ CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m CONFIG_MFD_TC3589X=y +CONFIG_MFD_TQMX86=m +# CONFIG_MFD_LOCHNAGAR is not set # CONFIG_MFD_ARIZONA_I2C is not set CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y @@ -3115,6 +3126,7 @@ CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y CONFIG_MFD_WM8994=y CONFIG_MFD_ROHM_BD718XX=m +CONFIG_MFD_STPMIC1=m CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_88PG86X=m @@ -3179,6 +3191,7 @@ CONFIG_REGULATOR_S2MPA01=m CONFIG_REGULATOR_S2MPS11=m CONFIG_REGULATOR_S5M8767=m CONFIG_REGULATOR_SKY81452=m +CONFIG_REGULATOR_STPMIC1=m CONFIG_REGULATOR_SY8106A=m CONFIG_REGULATOR_TPS51632=m CONFIG_REGULATOR_TPS62360=m @@ -3213,6 +3226,7 @@ CONFIG_IR_SHARP_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_XMP_DECODER=m # CONFIG_IR_IMON_DECODER is not set +CONFIG_IR_RCMM_DECODER=m CONFIG_RC_DEVICES=y # CONFIG_RC_ATI_REMOTE is not set # CONFIG_IR_HIX5HD2 is not set @@ -3462,8 +3476,6 @@ CONFIG_V4L_PLATFORM_DRIVERS=y # CONFIG_VIDEO_CADENCE is not set # CONFIG_VIDEO_ASPEED is not set # CONFIG_VIDEO_MUX is not set -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m # CONFIG_VIDEO_XILINX is not set CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m @@ -3536,7 +3548,6 @@ CONFIG_VIDEO_CX25840=m # CONFIG_VIDEO_OV2640=m CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_MT9M111=m CONFIG_VIDEO_MT9V011=m # @@ -3558,24 +3569,6 @@ CONFIG_VIDEO_MT9V011=m # # Miscellaneous helper chips # - -# -# Sensors used on soc_camera driver -# - -# -# soc_camera sensor drivers -# -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9T112=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_SOC_CAMERA_OV5642=m -CONFIG_SOC_CAMERA_OV772X=m -CONFIG_SOC_CAMERA_OV9640=m -CONFIG_SOC_CAMERA_OV9740=m -CONFIG_SOC_CAMERA_RJ54N1=m -CONFIG_SOC_CAMERA_TW9910=m CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_SIMPLE=y CONFIG_MEDIA_TUNER_TDA18250=m @@ -3763,6 +3756,11 @@ CONFIG_DRM_SCHED=m # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set CONFIG_DRM_I2C_NXP_TDA9950=m + +# +# ARM devices +# +# CONFIG_DRM_KOMEDA is not set CONFIG_DRM_RADEON=m # CONFIG_DRM_RADEON_USERPTR is not set CONFIG_DRM_AMDGPU=m @@ -3819,6 +3817,7 @@ CONFIG_DRM_PANEL_SIMPLE=m # CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m CONFIG_DRM_PANEL_JDI_LT070ME05000=m +CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=m CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m @@ -3831,6 +3830,7 @@ CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m +CONFIG_DRM_PANEL_SITRONIX_ST7701=m # CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y @@ -3857,6 +3857,8 @@ CONFIG_DRM_TI_SN65DSI86=m CONFIG_DRM_DW_HDMI=m CONFIG_DRM_DW_HDMI_AHB_AUDIO=m CONFIG_DRM_DW_HDMI_CEC=m +CONFIG_DRM_ETNAVIV=m +CONFIG_DRM_ETNAVIV_THERMAL=y CONFIG_DRM_ARCPGU=m CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_MXS=y @@ -4153,6 +4155,7 @@ CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=y # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set +# CONFIG_HID_VIEWSONIC is not set CONFIG_HID_GYRATION=m # CONFIG_HID_ICADE is not set CONFIG_HID_ITE=m @@ -4170,6 +4173,7 @@ CONFIG_HID_LOGITECH_HIDPP=m # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MALTRON is not set # CONFIG_HID_MAYFLASH is not set # CONFIG_HID_REDRAGON is not set CONFIG_HID_MICROSOFT=y @@ -4248,6 +4252,7 @@ CONFIG_USB_OTG=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_OTG_FSM=m # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set @@ -4264,6 +4269,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_FSL=m CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set @@ -4627,6 +4633,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_88PM860X=m CONFIG_RTC_DRV_88PM80X=m CONFIG_RTC_DRV_ABB5ZES3=m +CONFIG_RTC_DRV_ABEOZ9=m CONFIG_RTC_DRV_ABX80X=m CONFIG_RTC_DRV_AS3722=m CONFIG_RTC_DRV_DS1307=m @@ -4668,8 +4675,10 @@ CONFIG_RTC_DRV_RX8010=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3028=m CONFIG_RTC_DRV_RV8803=m CONFIG_RTC_DRV_S5M=m +CONFIG_RTC_DRV_SD3078=m # # SPI RTC drivers @@ -4717,6 +4726,7 @@ CONFIG_RTC_DRV_ZYNQMP=m # # on-CPU RTC drivers # +CONFIG_RTC_DRV_CADENCE=m CONFIG_RTC_DRV_FTRTC010=m CONFIG_RTC_DRV_SNVS=m CONFIG_RTC_DRV_MT6397=m @@ -4747,6 +4757,7 @@ CONFIG_QCOM_HIDMA=m # CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y # # DMABUF options @@ -4825,6 +4836,7 @@ CONFIG_CLK_TWL6040=m CONFIG_COMMON_CLK_PALMAS=m CONFIG_COMMON_CLK_VC5=m CONFIG_COMMON_CLK_BD718XX=m +# CONFIG_COMMON_CLK_FIXED_MMIO is not set CONFIG_HWSPINLOCK=y # @@ -4834,6 +4846,7 @@ CONFIG_MAILBOX=y # CONFIG_PLATFORM_MHU is not set CONFIG_ALTERA_MBOX=m # CONFIG_MAILBOX_TEST is not set +CONFIG_IOMMU_IOVA=y CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y @@ -4842,7 +4855,6 @@ CONFIG_IOMMU_SUPPORT=y # # CONFIG_IOMMU_DEBUGFS is not set # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_IOMMU_IOVA=y CONFIG_OF_IOMMU=y # @@ -4913,13 +4925,13 @@ CONFIG_EXTCON_MAX77693=m CONFIG_EXTCON_MAX77843=m CONFIG_EXTCON_MAX8997=m CONFIG_EXTCON_PALMAS=m +CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_RT8973A=m CONFIG_EXTCON_SM5502=m CONFIG_EXTCON_USB_GPIO=m CONFIG_MEMORY=y CONFIG_IIO=m # CONFIG_IIO_BUFFER is not set -CONFIG_IIO_TRIGGERED_BUFFER=m # CONFIG_IIO_CONFIGFS is not set # CONFIG_IIO_TRIGGER is not set # CONFIG_IIO_SW_DEVICE is not set @@ -4957,6 +4969,7 @@ CONFIG_IIO_TRIGGERED_BUFFER=m # Analog to digital converters # # CONFIG_AD7291 is not set +# CONFIG_AD7606_IFACE_PARALLEL is not set # CONFIG_AD799X is not set # CONFIG_AXP20X_ADC is not set # CONFIG_AXP288_ADC is not set @@ -4977,6 +4990,7 @@ CONFIG_IIO_TRIGGERED_BUFFER=m # CONFIG_QCOM_SPMI_VADC is not set # CONFIG_QCOM_SPMI_ADC5 is not set # CONFIG_SD_ADC_MODULATOR is not set +# CONFIG_STMPE_ADC is not set # CONFIG_TI_ADC081C is not set # CONFIG_TI_ADS1015 is not set # CONFIG_TWL4030_MADC is not set @@ -5000,6 +5014,8 @@ CONFIG_IIO_TRIGGERED_BUFFER=m # CONFIG_BME680 is not set # CONFIG_CCS811 is not set # CONFIG_IAQCORE is not set +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SPS30 is not set # CONFIG_VZ89X is not set # @@ -5114,6 +5130,7 @@ CONFIG_HID_SENSOR_IIO_COMMON=m # CONFIG_LTR501 is not set # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set +# CONFIG_MAX44009 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set @@ -5234,8 +5251,10 @@ CONFIG_RESET_TI_SYSCON=m # PHY Subsystem # CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PHY_MIPI_DPHY=y CONFIG_BCM_KONA_USB2_PHY=m CONFIG_PHY_CADENCE_DP=m +CONFIG_PHY_CADENCE_DPHY=m CONFIG_PHY_CADENCE_SIERRA=m CONFIG_PHY_FSL_IMX8MQ_USB=m CONFIG_PHY_PXA_28NM_HSIC=m @@ -5282,11 +5301,13 @@ CONFIG_MULTIPLEXER=m CONFIG_PM_OPP=y # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set +# CONFIG_INTERCONNECT is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_VALIDATE_FS_PARSER=y CONFIG_FS_IOMAP=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set @@ -5294,8 +5315,6 @@ CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_ENCRYPTION=y -CONFIG_EXT4_FS_ENCRYPTION=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set @@ -5428,7 +5447,6 @@ CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" # CONFIG_PSTORE_RAM is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_EXOFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m @@ -5466,6 +5484,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set CONFIG_CIFS=m @@ -5558,6 +5577,7 @@ CONFIG_FORTIFY_SOURCE=y # CONFIG_SECURITY_APPARMOR is not set # CONFIG_SECURITY_LOADPIN is not set # CONFIG_SECURITY_YAMA is not set +# CONFIG_SECURITY_SAFESETID is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -5565,7 +5585,7 @@ CONFIG_INTEGRITY_TRUSTED_KEYRING=y # CONFIG_IMA is not set # CONFIG_EVM is not set CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" +CONFIG_LSM="yama,loadpin,safesetid,integrity" CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m @@ -5599,7 +5619,7 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y @@ -5816,7 +5836,20 @@ CONFIG_HAS_DMA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DECLARE_COHERENT=y CONFIG_SWIOTLB=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +# CONFIG_DMA_API_DEBUG is not set CONFIG_SGL_ALLOC=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y @@ -5850,6 +5883,7 @@ CONFIG_OBJAGG=m # printk and dmesg options # CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_CALLER is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 @@ -5865,7 +5899,6 @@ CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_SECTION_MISMATCH is not set @@ -5881,6 +5914,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_PAGE_EXTENSION=y # CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_OWNER is not set CONFIG_PAGE_POISONING=y CONFIG_PAGE_POISONING_NO_SANITY=y # CONFIG_PAGE_POISONING_ZERO is not set @@ -5995,7 +6029,6 @@ CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set CONFIG_TRACING_EVENTS_GPIO=y -# CONFIG_DMA_API_DEBUG is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set @@ -6020,6 +6053,7 @@ CONFIG_RBTREE_TEST=m # CONFIG_TEST_IDA is not set # CONFIG_TEST_PARMAN is not set # CONFIG_TEST_LKM is not set +# CONFIG_TEST_VMALLOC is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_TEST_BPF is not set # CONFIG_FIND_BIT_BENCHMARK is not set @@ -6030,12 +6064,14 @@ CONFIG_RBTREE_TEST=m # CONFIG_TEST_KMOD is not set # CONFIG_TEST_MEMCAT_P is not set # CONFIG_TEST_OBJAGG is not set +# CONFIG_TEST_STACKINIT is not set # CONFIG_MEMTEST is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y CONFIG_IO_STRICT_DEVMEM=y diff --git a/kernel/config-x86-generic b/kernel/config-x86-generic index 2147e2b..9cf2a8d 100644 --- a/kernel/config-x86-generic +++ b/kernel/config-x86-generic @@ -23,9 +23,13 @@ CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # -# RCU Subsystem +# Timers subsystem # CONFIG_CONTEXT_TRACKING_FORCE=y + +# +# RCU Subsystem +# CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_ARCH_SUPPORTS_INT128=y @@ -315,7 +319,6 @@ CONFIG_AMD_NB=y # Binary Emulations # CONFIG_IA32_EMULATION=y -# CONFIG_IA32_AOUT is not set # CONFIG_X86_X32 is not set CONFIG_COMPAT_32=y CONFIG_COMPAT=y @@ -354,6 +357,7 @@ CONFIG_APPLE_PROPERTIES=y CONFIG_UEFI_CPER=y CONFIG_UEFI_CPER_X86=y CONFIG_EFI_DEV_PATH_PARSER=y +CONFIG_EFI_EARLYCON=y # # Tegra firmware driver @@ -385,9 +389,9 @@ CONFIG_ARCH_MMAP_RND_BITS=32 CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_ISA_BUS_API=y CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_COMPAT_32BIT_TIME=y CONFIG_VMAP_STACK=y CONFIG_ARCH_HAS_REFCOUNT=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y # # GCOV-based kernel profiling @@ -508,7 +512,6 @@ CONFIG_YENTA_TOSHIBA=y # # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_GENERIC_CPU_VULNERABILITIES=y -# CONFIG_DMA_CMA is not set # # Bus devices @@ -546,6 +549,7 @@ CONFIG_PVPANIC=m CONFIG_INTEL_MEI=m CONFIG_INTEL_MEI_ME=m CONFIG_INTEL_MEI_TXE=m +# CONFIG_INTEL_MEI_HDCP is not set CONFIG_VMWARE_VMCI=m # @@ -559,11 +563,6 @@ CONFIG_INTEL_MIC_BUS=m # CONFIG_SCIF_BUS is not set # -# VOP Bus Driver -# -# CONFIG_VOP_BUS is not set - -# # VOP Driver # # CONFIG_GENWQE is not set @@ -585,7 +584,6 @@ CONFIG_SCSI_FLASHPOINT=y CONFIG_VMWARE_PVSCSI=m CONFIG_HYPERV_STORAGE=m CONFIG_FCOE_FNIC=m -CONFIG_SCSI_GDTH=m CONFIG_SCSI_ISCI=m CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set @@ -1080,7 +1078,7 @@ CONFIG_VIDEO_SAA6588=m CONFIG_VIDEO_SAA6752HS=m # -# soc_camera sensor drivers +# Miscellaneous helper chips # CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QM1D1B0004=m @@ -1322,6 +1320,7 @@ CONFIG_EDAC_I5100=m CONFIG_EDAC_I7300=m CONFIG_EDAC_SBRIDGE=m CONFIG_EDAC_SKX=m +CONFIG_EDAC_I10NM=m CONFIG_EDAC_PND2=m CONFIG_RTC_MC146818_LIB=y @@ -1342,11 +1341,6 @@ CONFIG_DW_DMAC_PCI=y CONFIG_HSU_DMA=m # -# DMA Clients -# -CONFIG_DMA_ENGINE_RAID=y - -# # DMABUF options # CONFIG_DCA=m @@ -1457,6 +1451,7 @@ CONFIG_INTEL_CHTDC_TI_PWRBTN=m # CONFIG_I2C_MULTI_INSTANTIATE is not set CONFIG_INTEL_ATOMISP2_PM=m CONFIG_HUAWEI_WMI=m +CONFIG_PCENGINES_APU2=m CONFIG_PMC_ATOM=y # CONFIG_MELLANOX_PLATFORM is not set @@ -1485,6 +1480,7 @@ CONFIG_INTEL_IOMMU_SVM=y # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_INTEL_IOMMU_FLOPPY_WA=y CONFIG_IRQ_REMAP=y +CONFIG_HYPERV_IOMMU=y # # Remoteproc drivers @@ -1652,6 +1648,10 @@ CONFIG_ARCH_HAS_FAST_MULTIPLIER=y CONFIG_ZLIB_DEFLATE=y CONFIG_XARRAY_MULTI=y CONFIG_HAS_IOPORT_MAP=y + +# +# Default contiguous memory area size: +# CONFIG_IOMMU_HELPER=y CONFIG_UCS2_STRING=y CONFIG_ARCH_HAS_PMEM_API=y @@ -1698,7 +1698,6 @@ CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set -CONFIG_EARLY_PRINTK_EFI=y # CONFIG_EARLY_PRINTK_USB_XDBC is not set CONFIG_X86_PTDUMP_CORE=y # CONFIG_X86_PTDUMP is not set diff --git a/kernel/kernel.nm b/kernel/kernel.nm index aa52df1..4227cf7 100644 --- a/kernel/kernel.nm +++ b/kernel/kernel.nm @@ -4,8 +4,8 @@ ############################################################################### name = kernel -version = 5.0 -release = 3 +version = 5.1 +release = 1 thisapp = linux-%{version} maintainer = Arne Fitzenreiter <arne.fitzenreiter(a)ipfire.org> -- 2.6.3

2 1

[PATCH] sysctl: improve KASLR effectiveness for mmap
by Peter Müller 06 Jul '19

06 Jul '19

By feeding more random bits into mmap allocation, the effectiveness of KASLR will be improved, making attacks trying to bypass address randomisation more difficult. Changed sysctl values are: vm.mmap_rnd_bits = 32 (default: 28) vm.mmap_rnd_compat_bits = 16 (default: 8) This patch backports the same change made in IPFire 2.x into IPFire 3.x . Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- setup/setup.nm | 2 +- setup/sysctl/kernel-hardening.conf | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/setup/setup.nm b/setup/setup.nm index be0ca4ba0..09d94e23d 100644 --- a/setup/setup.nm +++ b/setup/setup.nm @@ -5,7 +5,7 @@ name = setup version = 3.0 -release = 13 +release = 14 arch = noarch groups = Base Build System/Base diff --git a/setup/sysctl/kernel-hardening.conf b/setup/sysctl/kernel-hardening.conf index 9bb6e9f45..33e096c7c 100644 --- a/setup/sysctl/kernel-hardening.conf +++ b/setup/sysctl/kernel-hardening.conf @@ -4,3 +4,6 @@ kernel.kptr_restrict = 2 # Avoid kernel memory address exposures via dmesg. kernel.dmesg_restrict = 1 +# Improve KASLR effectiveness for mmap. +vm.mmap_rnd_bits = 32 +vm.mmap_rnd_compat_bits = 16 -- 2.16.4

1 0

[PATCH] Core Update 135: ship updated tzdata
by Peter Müller 06 Jul '19

06 Jul '19

Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/core/135/filelists/tzdata | 1 + 1 file changed, 1 insertion(+) create mode 120000 config/rootfiles/core/135/filelists/tzdata diff --git a/config/rootfiles/core/135/filelists/tzdata b/config/rootfiles/core/135/filelists/tzdata new file mode 120000 index 000000000..5a6e3252f --- /dev/null +++ b/config/rootfiles/core/135/filelists/tzdata @@ -0,0 +1 @@ +../../../common/tzdata \ No newline at end of file -- 2.16.4

1 0

[PATCH] sysctl: improve KASLR effectiveness for mmap
by Peter Müller 04 Jul '19

04 Jul '19

By feeding more random bits into mmap allocation, the effectiveness of KASLR will be improved, making attacks trying to bypass address randomisation more difficult. Changed sysctl values are: vm.mmap_rnd_bits = 32 (default: 28) vm.mmap_rnd_compat_bits = 16 (default: 8) Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/etc/sysctl.conf | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/config/etc/sysctl.conf b/config/etc/sysctl.conf index 9a943fffa..5a67f1795 100644 --- a/config/etc/sysctl.conf +++ b/config/etc/sysctl.conf @@ -45,6 +45,10 @@ kernel.kptr_restrict = 2 # Avoid kernel memory address exposures via dmesg. kernel.dmesg_restrict = 1 +# Improve KASLR effectiveness for mmap +vm.mmap_rnd_bits = 32 +vm.mmap_rnd_compat_bits = 16 + # Minimal preemption granularity for CPU-bound tasks: # (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds) kernel.sched_min_granularity_ns = 10000000 -- 2.16.4

2 2

[PATCH] clamav: Disable llvm support.
by Stefan Schantl 04 Jul '19

04 Jul '19

When enabled, LLVM provides the capability to just-in-time compile ClamAV bytecode signatures. Without LLVM, ClamAV uses a built-in bytecode interpreter to execute bytecode signatures. The mechanism is different, but the results are same and the performance overall is comparable. At present only LLVM versions up to LLVM 3.6.2 are supported by ClamAV, and LLVM 3.6.2 is old enough that newer distributions no longer provide it. Therefore, the ClamAV Devs recommend using the --disable-llvm configure option. Fixes #11601. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> --- clamav/clamav.nm | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/clamav/clamav.nm b/clamav/clamav.nm index 9a550544e..9abe6c40e 100644 --- a/clamav/clamav.nm +++ b/clamav/clamav.nm @@ -5,7 +5,7 @@ name = clamav version = 0.101.2 -release = 1 +release = 2 groups = System Environment/Daemons url = http://www.clamav.net @@ -49,6 +49,7 @@ build --with-user=clamupdate \ --with-group=clamupdate \ --disable-rpath \ + --disable-llvm \ have_cv_ipv6=yes # User and group have to exist to compile the source code, -- 2.21.0

2 1

[PATCH] drop excessive ICMP ping traffic to the firewall
by Peter Müller 04 Jul '19

04 Jul '19

pings are replied to for diagnostic reasons only. As unlimited response generation may open up a (D)DoS attack surface for both external and internal networks, dropping excessive traffic is reasonable. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- src/initscripts/system/firewall | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/initscripts/system/firewall b/src/initscripts/system/firewall index b3483a744..622d7de4e 100644 --- a/src/initscripts/system/firewall +++ b/src/initscripts/system/firewall @@ -214,10 +214,12 @@ iptables_init() { iptables -N IPTVFORWARD iptables -A FORWARD -j IPTVFORWARD - # Allow to ping the firewall. + # Allow non-excessive pings to the firewall iptables -N ICMPINPUT iptables -A INPUT -j ICMPINPUT - iptables -A ICMPINPUT -p icmp --icmp-type 8 -j ACCEPT + iptables -A ICMPINPUT -p icmp --icmp-type 8 -m limit --limit 100/second -j ACCEPT + iptables -A ICMPINPUT -p icmp --icmp-type 8 -m limit --limit 10/minute -j LOG --log-prefix "DROP_PINGFLOOD " -m comment --comment "DROP ping flood" + iptables -A ICMPINPUT -p icmp --icmp-type 8 -j DROP # Accept everything on loopback iptables -N LOOPBACK -- 2.16.4

2 2

[PATCH] firewall: accept inbound Tor traffic before applying GeoIP
by Peter Müller 04 Jul '19

04 Jul '19

Inbound Tor traffic conflicts with GeoIP block as inbound connections have to be accepted from many parts of the world. To solve this, inbound Tor traffic has to be accepted before jumping into GeoIP block chain. Note this affects Tor relay operators only. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- src/initscripts/system/firewall | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/src/initscripts/system/firewall b/src/initscripts/system/firewall index b3483a744..e4b29da28 100644 --- a/src/initscripts/system/firewall +++ b/src/initscripts/system/firewall @@ -269,6 +269,10 @@ iptables_init() { iptables -A OUTPUT -o "${BLUE_DEV}" -j DHCPBLUEOUTPUT fi + # Tor (inbound) + iptables -N TOR_INPUT + iptables -A INPUT -j TOR_INPUT + # GeoIP block iptables -N GEOIPBLOCK iptables -A INPUT -j GEOIPBLOCK @@ -302,9 +306,7 @@ iptables_init() { iptables -N OVPNINPUT iptables -A INPUT -j OVPNINPUT - # Tor (inbound and outbound) - iptables -N TOR_INPUT - iptables -A INPUT -j TOR_INPUT + # Tor (outbound) iptables -N TOR_OUTPUT iptables -A OUTPUT -j TOR_OUTPUT -- 2.16.4

2 1

[PATCH] tzdata: update to 2019b
by Peter Müller 04 Jul '19

04 Jul '19

Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- lfs/tzdata | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lfs/tzdata b/lfs/tzdata index 39f262608..04add8396 100644 --- a/lfs/tzdata +++ b/lfs/tzdata @@ -24,7 +24,7 @@ include Config -VER = 2018i +VER = 2019b TZDATA_VER = $(VER) TZCODE_VER = $(VER) @@ -45,8 +45,8 @@ objects = tzdata$(TZDATA_VER).tar.gz tzcode$(TZCODE_VER).tar.gz tzdata$(TZDATA_VER).tar.gz = $(DL_FROM)/tzdata$(TZDATA_VER).tar.gz tzcode$(TZCODE_VER).tar.gz = $(DL_FROM)/tzcode$(TZCODE_VER).tar.gz -tzdata$(TZDATA_VER).tar.gz_MD5 = b3f0a1a789480a036e58466cd0702477 -tzcode$(TZCODE_VER).tar.gz_MD5 = 6a6d98be8fa2fa3485e25343e79188b4 +tzdata$(TZDATA_VER).tar.gz_MD5 = b26b5d7d844cb96c73ed2fb6d588daaf +tzcode$(TZCODE_VER).tar.gz_MD5 = 91e0978d947496fd6aaf46d351f9c41d install : $(TARGET) -- 2.16.4

1 0

[PATCH] firewall-lib.pl: Populate GeoIP rules only if location is available.
by Stefan Schantl 04 Jul '19

04 Jul '19

In case a GeoIP related firewall rule should be created, the script now will check if the given location is still available. Fixes #12054. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> --- config/firewall/firewall-lib.pl | 40 ++++++++++++++++++++++++++++----- 1 file changed, 34 insertions(+), 6 deletions(-) diff --git a/config/firewall/firewall-lib.pl b/config/firewall/firewall-lib.pl index 118744fd6..59ae096b0 100644 --- a/config/firewall/firewall-lib.pl +++ b/config/firewall/firewall-lib.pl @@ -70,6 +70,9 @@ my $netsettings = "${General::swroot}/ethernet/settings"; &General::readhasharray("$configsrvgrp", \%customservicegrp); &General::get_aliases(\%aliases); +# Get all available GeoIP locations. +my @available_geoip_locations = &get_geoip_locations(); + sub get_srv_prot { my $val=shift; @@ -456,17 +459,23 @@ sub get_address # Handle rule options with GeoIP as source. } elsif ($key eq "cust_geoip_src") { - # Get external interface. - my $external_interface = &get_external_interface(); + # Check if the given GeoIP location is available. + if(&geoip_location_is_available($value)) { + # Get external interface. + my $external_interface = &get_external_interface(); - push(@ret, ["-m geoip --src-cc $value", "$external_interface"]); + push(@ret, ["-m geoip --src-cc $value", "$external_interface"]); + } # Handle rule options with GeoIP as target. } elsif ($key eq "cust_geoip_tgt") { - # Get external interface. - my $external_interface = &get_external_interface(); + # Check if the given GeoIP location is available. + if(&geoip_location_is_available($value)) { + # Get external interface. + my $external_interface = &get_external_interface(); - push(@ret, ["-m geoip --dst-cc $value", "$external_interface"]); + push(@ret, ["-m geoip --dst-cc $value", "$external_interface"]); + } # If nothing was selected, we assume "any". } else { @@ -610,4 +619,23 @@ sub get_geoip_locations() { return &GeoIP::get_geoip_locations(); } +# Function to check if a database of a given GeoIP location is +# available. +sub geoip_location_is_available($) { + my ($location) = @_; + + # Loop through the global array of available GeoIP locations. + foreach my $geoip_location (@available_geoip_locations) { + # Check if the current processed location is the searched one. + if($location eq $geoip_location) { + # If it is part of the array, return "1" - True. + return 1; + } + } + + # If we got here, the given location is not part of the array of available + # zones. Return nothing. + return; +} + return 1; -- 2.20.1

3 3

[PATCH 1/3] cmake: Update to 3.14.5
by Stefan Schantl 04 Jul '19

04 Jul '19

This is a minor update to the latest stable version of cmake. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> --- cmake/cmake.nm | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/cmake/cmake.nm b/cmake/cmake.nm index 8bb3a3c63..ee8e91015 100644 --- a/cmake/cmake.nm +++ b/cmake/cmake.nm @@ -6,7 +6,7 @@ name = cmake version = %{ver_maj}.%{ver_min} ver_maj = 3.14 -ver_min = 1 +ver_min = 5 release = 1 groups = Development/Tools @@ -15,11 +15,11 @@ license = BSD summary = Cross-platform make system. description - CMake is used to control the software compilation process using simple \ - platform and compiler independent configuration files. CMake generates \ - native makefiles and workspaces that can be used in the compiler \ - environment of your choice. CMake is quite sophisticated: it is possible \ - to support complex environments requiring system configuration, pre-processor \ + CMake is used to control the software compilation process using simple + platform and compiler independent configuration files. CMake generates + native makefiles and workspaces that can be used in the compiler + environment of your choice. CMake is quite sophisticated: it is possible + to support complex environments requiring system configuration, pre-processor generation, code generation, and template instantiation. end -- 2.21.0

2 3

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development July 2019