Development March 2020

development@lists.ipfire.org

14 participants
59 discussions

Updating 'vnstat' to 2.6 - need some help with necessary changes
by Matthias Fischer 23 Mar '20

23 Mar '20

Hi, I successfully built 'vnstat 2.6' under Core 142/32bit. Right now a test version is running on my testmachine under Core 138 - no seen problems. Upgrading lfs and rootfile was enough for building, but I'm struggling (a bit) with the necessary changes in some IPFire scripts. So I'm asking here if there are ideas how to do this the best way. Be warned, this is long... ;-) Situation: 1. Building is fine, but since 'vnstat 2.0' "C struct dump database has been replaced with sqlite database". See: [humdi-URL deleted ... Thanks Peter!] This is one of the most important changes! The old interface files '.green0', 'red0' etc. are only needed *once* after the update. After a successful update and import (this is done automatically at the first start of 'vnstatd -d --alwaysadd', see below), these files are obsolete and can be deleted. What I changed by hand to get this running: 1. GIT: Added '/usr/sbin/vnstatd' to rootfile. The new version needs it. 2. GIT: Deleted 'touch /var/log/vnstat/tag' from lfs and '/var/log/vnstat/tag' from rootfile. *Question*: Perhaps the 'sed'-line in 'lfs' replacing 'eth0' with 'green0' can be deleted, too ("leave empty for automatic selection")!? 3. Deleted the following lines from '/usr/local/bin/makegraphs': ... ## Update vnstat system ('/usr/bin/vnstat -u'); ... 4. Stopped 'vnstat' and 'collectd' (to be sure, I stopped both, perhaps only stopping 'vnstat' is needed here). 5. Installed the new files on my testmachine: /etc/vnstat.conf /usr/bin/vnstat /usr/bin/vnstati /usr/sbin/vnstatd 6. Started 'vnstatd -d --alwaysadd'. '-d' => fork process to background '--alwaysadd' => always add new interfaces even when some dbs exist *Result*: ... [root@ipfiretest vnstat]# vnstatd -d --alwaysadd Importing data from legacy database "green0". Importing data from legacy database "blue0". Importing data from legacy database "red0". No interfaces found in database, adding available interfaces... ... This created a new file: '/var/log/vnstat/vnstat.db' (SQL - see above), plus 'vnstatd' running in background with a PID. *Question*: Where and how should the start/stop/reload of 'vnstatd' be added? I think of adding appopriate commands to '/etc/initd/vnstat' but can't get a grip on this. Would need some help with this. Possibilities (from 'man vnstatd'): "SIGNALS The daemon is listening to signals SIGHUP, SIGINT and SIGTERM. Sending the SIGHUP signal to the daemon will cause cached data to be written to disk, a rescan of the database directory and a reload of settings from the configuration file. However, the pid file location will not be changed even if it's configuration setting has been modified. SIGTERM and SIGINT signals will cause the daemon to write all cached data to disk and then exit." start section would need: 'vnstatd -d --alwaysadd' stop section: SIGTERM or SIGINT (tested with 'htop' sending SIGTERM: works) reload section (if config was changed): SIGHUP How to do this the best way? I'm stuck with this. 7. Deleted all old interface files in '/var/log/vnstat (.green0, .red0, etc.) *Question*: In my opinion, this could be done after upgrading *plus* a successful import of the old interface files *plus* a successful start of 'vnstatd -d --alwaysadd'. If 'vnstatd.db' was successfully created, these files are not needed anymore. How to do this the best way? 8. Since the graphs are no longer updated through 'makegraphs', I created a symlink in '/etc/fcron.minutely' to '/var/usr/sbin/vnstat' (*No* parameters, '-u' doesn't exist anymore). Now every minute 'vnstat' now grabs the data collected by'vnstatd'. 9. Edited 'traffic.cgi', changed: system("/usr/bin/vnstati -c 5 To: system("/usr/bin/vnstati -c 2 This keeps the graphs a bit more "updated". >From 'man vnstat': '-c (--cache-time) => Update output file only if at least *time* minutes have passed since the previous file update. Attachments: Screenshot fomr my testmachine after importing the old interface files from my production machine. I made some minor adjustments to 'vnstat.conf', attached. Thanks for any help! Best, Matthias

2 2

[PATCH 1/4] cdrom: Cleanup everything after mastering
by Michael Tremer 23 Mar '20

23 Mar '20

Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> --- lfs/cdrom | 3 +++ 1 file changed, 3 insertions(+) diff --git a/lfs/cdrom b/lfs/cdrom index f18b80a03..175a5aedc 100644 --- a/lfs/cdrom +++ b/lfs/cdrom @@ -255,6 +255,9 @@ endif cd $(DIR_TMP)/cdrom && mkisofs $(ISO_ARGS) \ -o /install/images/$(SNAME)-$(VERSION).$(BUILD_ARCH)-full-core$(CORE).iso . + # Cleanup everything + rm -rf $(DIR_TMP)/cdrom + ifeq "$(HAS_ISOLINUX)" "1" isohybrid $(ISOHYBRID_ARGS) /install/images/$(SNAME)-$(VERSION).$(BUILD_ARCH)-full-core$(CORE).iso endif -- 2.20.1

1 3

Patches for Core Update 143
by Peter Müller 23 Mar '20

23 Mar '20

Hello Arne, I do not want to appear utterly inquisitive, but may I ask you to have a look at these patches: (a) mail.cgi: add support for implicit TLS usage -> https://patchwork.ipfire.org/patch/2748/ -> https://patchwork.ipfire.org/patch/2749/ (b) coreutils: update to 8.31 -> https://patchwork.ipfire.org/patch/2746/ -> https://patchwork.ipfire.org/patch/2747/ (c) dma: update to 0.12 -> https://patchwork.ipfire.org/patch/2743/ (d) avoid emitting VPN traffic to the internet if the IPS crashed -> https://patchwork.ipfire.org/patch/2727/ (e) sshd_config: Do not set defaults explicitly -> https://patchwork.ipfire.org/patch/2711/ -> https://patchwork.ipfire.org/patch/2712/ (f) sysctl.conf: Turn on hard- and symlink protection -> https://patchwork.ipfire.org/patch/2720/ I will care about OpenSSH 8.2p1 with glibc 2.31 this afternoon. Thanks, and best regards, Peter Müller

3 2

Fwd: [FAILED] Nightly Build of next (4e412a0) for armv5tel on arm64-02.dub.ipfire.org
by Michael Tremer 23 Mar '20

23 Mar '20

Good morning boys, I hope everyone is alright in this trouble. Finally, we are working on putting a new Core Update together. It has many exciting things in to like a whole new toolchain of glibc, gcc and binutils. Yay. However it does not build on ARMv5 because of pixman. There is an update available: pixman-0.38.4.tar.gz <https://www.cairographics.org/releases/pixman-0.38.4.tar.gz> Is anyone up for submitting a patch really shortly - like today? Best, -Michael > Begin forwarded message: > > From: IPFire Nightly Builder <nightly-builds(a)ipfire.org> > Subject: [FAILED] Nightly Build of next (4e412a0) for armv5tel on arm64-02.dub.ipfire.org > Date: 23 March 2020 at 00:49:49 GMT > To: Nightly Builds List <nightly-builds(a)lists.ipfire.org> > > https://nightly.ipfire.org/next/2020-03-22%2019%3A10%3A46%20%2B0000-4e412a0… > > commit 4e412a00d30b1d4157565db0df239264f1c113e7 > Author: Arne Fitzenreiter <arne_f(a)ipfire.org> > Date: Sun Mar 22 19:10:46 2020 +0000 > > core143: add glibc > > Signed-off-by: Arne Fitzenreiter <arne_f(a)ipfire.org> > > https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=4e412a00d30b1d4157565… > > Packaged toolchain compilation > Checking for necessary space on disk [ DONE ] > Building LFS > stage2 [ 1 ][ DONE ] > linux (4.14.173) KCFG=-headers [ 22 ][ DONE ] > man-pages (2.34) [ 9 ][ DONE ] > glibc (2.31) [ 16:23 ][ DONE ] > tzdata (2019c) [ 3 ][ DONE ] > cleanup-toolchain [ 0 ][ DONE ] > zlib (1.2.11) [ 4 ][ DONE ] > binutils (2.34) [ 2:25 ][ DONE ] > gmp (6.1.2) [ 1:32 ][ DONE ] > gmp-compat (4.3.2) [ 1:23 ][ DONE ] > mpfr (4.0.2) [ 52 ][ DONE ] > libmpc (1.1.0) [ 14 ][ DONE ] > file (5.38) [ 18 ][ DONE ] > gcc (9.3.0) [ 28:43 ][ DONE ] > sed (4.4) [ 47 ][ DONE ] > autoconf (2.69) [ 4 ][ DONE ] > automake (1.15) [ 4 ][ DONE ] > berkeley (4.4.20) [ 1:36 ][ DONE ] > coreutils (8.30) [ 3:44 ][ DONE ] > iana-etc (2.30) [ 0 ][ DONE ] > m4 (1.4.18) [ 48 ][ DONE ] > bison (3.0.5) [ 1:17 ][ DONE ] > ncurses (6.0) [ 59 ][ DONE ] > procps (3.2.8) [ 8 ][ DONE ] > libtool (2.4.4) [ 15 ][ DONE ] > perl (5.30.0) [ 5:28 ][ DONE ] > readline (8.0) [ 18 ][ DONE ] > readline-compat (6.3) [ 15 ][ DONE ] > bzip2 (1.0.6) [ 14 ][ DONE ] > xz (5.2.4) [ 31 ][ DONE ] > pcre (8.44) [ 50 ][ DONE ] > pcre-compat (7.7) [ 27 ][ DONE ] > bash (5.0) [ 1:09 ][ DONE ] > diffutils (3.6) [ 1:01 ][ DONE ] > e2fsprogs (1.44.4) [ 1:14 ][ DONE ] > ed (0.2) [ 5 ][ DONE ] > findutils (4.6.0) [ 1:33 ][ DONE ] > flex (2.6.4) [ 26 ][ DONE ] > gawk (4.1.4) [ 41 ][ DONE ] > gettext (0.19.8.1) [ 5:32 ][ DONE ] > grep (2.27) [ 52 ][ DONE ] > groff (1.22.4) [ 2:36 ][ DONE ] > gperf (3.0.4) [ 7 ][ DONE ] > gzip (1.9) [ 31 ][ DONE ] > hostname (3.20) [ 0 ][ DONE ] > iproute2 (5.3.0) [ 29 ][ DONE ] > jwhois (4.0) [ 13 ][ DONE ] > kbd (1.12) [ 6 ][ DONE ] > less (530) [ 11 ][ DONE ] > pkg-config (0.29.2) [ 58 ][ DONE ] > make (4.2.1) [ 29 ][ DONE ] > man (2.4.3) [ 34 ][ DONE ] > net-tools (1.60) [ 15 ][ DONE ] > patch (2.7.6) [ 53 ][ DONE ] > psmisc (22.2) [ 7 ][ DONE ] > shadow (4.2.1) [ 33 ][ DONE ] > sysklogd (1.5.1) [ 2 ][ DONE ] > sysvinit (2.88dsf) [ 2 ][ DONE ] > tar (1.32) [ 1:13 ][ DONE ] > texinfo (6.6) [ 1:08 ][ DONE ] > util-linux (2.28.2) [ 1:31 ][ DONE ] > vim (8.1) [ 1:17 ][ DONE ] > Building IPFire > configroot [ 1 ][ DONE ] > initscripts [ 1 ][ DONE ] > backup [ 0 ][ DONE ] > openssl (1.1.1e) [ 4:33 ][ DONE ] > kmod (26) [ 15 ][ DONE ] > udev (3.2.6) [ 36 ][ DONE ] > popt (1.16) [ 11 ][ DONE ] > libedit (20190324-3.1) [ 17 ][ DONE ] > libusb (1.0.19) [ 10 ][ DONE ] > libusb-compat (0.1.5) [ 4 ][ DONE ] > libpcap (1.9.1) [ 18 ][ DONE ] > ppp (2.4.8) [ 14 ][ DONE ] > pptp (1.7.2) [ 1 ][ DONE ] > unzip (60) [ 14 ][ DONE ] > which (2.21) [ 5 ][ DONE ] > linux-firmware (20191022) [ 20 ][ DONE ] > dvb-firmwares (20141125) [ 0 ][ DONE ] > xr819-firmware (c01.08.0043) [ 1 ][ DONE ] > zd1211-firmware (1.4) [ 0 ][ DONE ] > rpi-firmware (20180316) [ 1 ][ DONE ] > intel-microcode (20191115) [ 0 ][ SKIP ] > pcengines-apu-firmware (4.10.0.3) [ 0 ][ SKIP ] > bc (1.07.1) [ 10 ][ DONE ] > u-boot (2018.03) MKIMAGE=1 [ 38 ][ DONE ] > cpio (2.13) [ 1:04 ][ DONE ] > mdadm (4.1) [ 15 ][ DONE ] > dracut (038) [ 1 ][ DONE ] > libaio (0.3.111) [ 1 ][ DONE ] > lvm2 (2.02.181) [ 1:09 ][ DONE ] > multipath-tools (386d288) [ 1 ][ DONE ] > freetype (2.7.1) [ 32 ][ DONE ] > libmnl (1.0.4) [ 4 ][ DONE ] > libnfnetlink (1.0.1) [ 6 ][ DONE ] > libnetfilter_queue (1.0.3) [ 5 ][ DONE ] > libnetfilter_conntrack (1.0.7) [ 10 ][ DONE ] > libnetfilter_cthelper (1.0.0) [ 6 ][ DONE ] > libnetfilter_cttimeout (1.0.0) [ 5 ][ DONE ] > iptables (1.8.3) [ 23 ][ DONE ] > screen (4.2.1) [ 22 ][ DONE ] > elfutils (0.176) [ 1:24 ][ DONE ] > linux (4.14.173) KCFG=-multi [ 54:48 ][ DONE ] > xtables-addons (3.2) KCFG=-multi [ 26 ][ DONE ] > linux-initrd ($(KVER)) KCFG=-multi [ 21 ][ DONE ] > xtables-addons (3.2) USPACE=1 [ 6 ][ DONE ] > libgpg-error (1.27) [ 14 ][ DONE ] > libgcrypt (1.8.4) [ 41 ][ DONE ] > libassuan (2.4.3) [ 11 ][ DONE ] > nettle (3.5.1) [ 30 ][ DONE ] > json-c (0.13.1) [ 12 ][ DONE ] > libconfig (1.7.2) [ 39 ][ DONE ] > libevent (1.4.14b-stable) [ 18 ][ DONE ] > libevent2 (2.1.8-stable) [ 41 ][ DONE ] > expat (2.2.0) [ 16 ][ DONE ] > apr (1.7.0) [ 48 ][ DONE ] > aprutil (1.6.1) [ 13 ][ DONE ] > unbound (1.10.0) [ 1:05 ][ DONE ] > gnutls (3.6.7) [ 3:11 ][ DONE ] > bind (9.11.13) [ 4:19 ][ DONE ] > dhcp (4.4.1) [ 3:56 ][ DONE ] > dhcpcd (7.2.3) [ 9 ][ DONE ] > boost (1_64_0) [ 27:26 ][ DONE ] > linux-atm (2.4.1) [ 28 ][ DONE ] > gdbm (1.8.3) [ 10 ][ DONE ] > pam (1.3.1) [ 1:03 ][ DONE ] > curl (7.64.0) [ 1:08 ][ DONE ] > tcl (8.6.6) [ 3:23 ][ DONE ] > sqlite (3260000) [ 3:41 ][ DONE ] > libffi (3.2.1) [ 11 ][ DONE ] > python (2.7.17) [ 3:30 ][ DONE ] > python3 (3.8.1) [ 2:59 ][ DONE ] > grub (2.02) [ 0 ][ SKIP ] > efivar (37) [ 0 ][ SKIP ] > efibootmgr (16) [ 0 ][ SKIP ] > ca-certificates (20191128) [ 5 ][ DONE ] > fireinfo (2.1.12) [ 19 ][ DONE ] > libnet (1.1.6) [ 21 ][ DONE ] > libnl (1.1.4) [ 15 ][ DONE ] > libnl-3 (3.2.25) [ 51 ][ DONE ] > libidn (1.34) [ 59 ][ DONE ] > nasm (2.14.02) [ 29 ][ DONE ] > libjpeg (1.5.1) [ 28 ][ DONE ] > libjpeg-compat (1.3.1) [ 43 ][ DONE ] > libexif (0.6.21) [ 10 ][ DONE ] > libpng (1.2.57) [ 21 ][ DONE ] > libtiff (4.0.6) [ 51 ][ DONE ] > libart (2.3.21) [ 12 ][ DONE ] > gd (2.0.33) [ 19 ][ DONE ] > slang (2.3.0) [ 1:19 ][ DONE ] > newt (0.52.18) [ 10 ][ DONE ] > libsmooth [ 17 ][ DONE ] > attr (2.4.47) [ 13 ][ DONE ] > acl (2.2.52) [ 19 ][ DONE ] > libcap (2.25) [ 4 ][ DONE ] > libcap-ng (0.7.9) [ 7 ][ DONE ] > pciutils (3.5.6) [ 4 ][ DONE ] > usbutils (007) [ 11 ][ DONE ] > libxml2 (2.9.4) [ 1:28 ][ DONE ] > libxslt (1.1.28) [ 35 ][ DONE ] > BerkeleyDB (0.27) [ 13 ][ DONE ] > cyrus-sasl (2.1.26) [ 46 ][ DONE ] > openldap (2.3.20) [ 2:26 ][ DONE ] > apache2 (2.4.41) [ 2:03 ][ DONE ] > web-user-interface [ 3 ][ DONE ] > flag-icons (2.6) [ 2 ][ DONE ] > jquery (1.10.2) [ 1 ][ DONE ] > bootstrap (4.0.0-alpha.6) [ 1 ][ DONE ] > arping (2.15) [ 13 ][ DONE ] > beep (1.3) [ 1 ][ DONE ] > libarchive (3.4.0) [ 1:10 ][ DONE ] > cmake (3.11.2) [ 25:01 ][ DONE ] > libssh (0.9.3) [ 30 ][ DONE ] > cdrkit (1.1.11) [ 28 ][ DONE ] > dosfstools (3.0.9) [ 3 ][ DONE ] > reiserfsprogs (3.6.27) [ 38 ][ DONE ] > xfsprogs (4.18.0) [ 1:43 ][ DONE ] > sysfsutils (1.3.0) [ 12 ][ DONE ] > fuse (2.9.7) [ 16 ][ DONE ] > ntfs-3g (2017.3.23) [ 44 ][ DONE ] > ethtool (3.16) [ 6 ][ DONE ] > fcron (3.2.0) [ 18 ][ DONE ] > perl-GD (2.35) [ 10 ][ DONE ] > GD-Graph (1.4308) [ 2 ][ DONE ] > GD-TextUtil (0.86) [ 2 ][ DONE ] > perl-Device-SerialPort (1.000002) [ 11 ][ DONE ] > perl-Device-Modem (1.56) [ 2 ][ DONE ] > perl-Apache-Htpasswd (1.9) [ 2 ][ DONE ] > gnupg (1.4.23) [ 52 ][ DONE ] > hdparm (9.55) [ 4 ][ DONE ] > sdparm (1.10) [ 5 ][ DONE ] > mtools (3.9.10) [ 19 ][ DONE ] > whatmask (1.2) [ 4 ][ DONE ] > conntrack-tools (1.4.5) [ 20 ][ DONE ] > libupnp (1.6.18) [ 23 ][ DONE ] > ipaddr (1.2) [ 1 ][ DONE ] > iputils (s20160308) [ 5 ][ DONE ] > l7-protocols (2009-05-10) [ 1 ][ DONE ] > hwdata [ 1 ][ DONE ] > logrotate (3.15.1) [ 11 ][ DONE ] > logwatch (7.5.2) [ 2 ][ DONE ] > misc-progs [ 11 ][ DONE ] > nano (4.7) [ 45 ][ DONE ] > URI (1.35) [ 2 ][ DONE ] > perl-CGI (4.44) [ 2 ][ DONE ] > perl-Switch (2.17) [ 2 ][ DONE ] > HTML-Tagset (3.04) [ 1 ][ DONE ] > HTML-Parser (3.45) [ 6 ][ DONE ] > HTML-Template (2.94) [ 1 ][ DONE ] > Compress-Zlib (1.35) [ 5 ][ DONE ] > Digest (1.08) [ 2 ][ DONE ] > Digest-SHA1 (2.10) [ 3 ][ DONE ] > Digest-HMAC (1.01) [ 2 ][ DONE ] > libwww-perl (5.803) [ 7 ][ DONE ] > Net-DNS (0.47) [ 4 ][ DONE ] > Net-IPv4Addr (0.10) [ 2 ][ DONE ] > Net_SSLeay (1.88) [ 34 ][ DONE ] > IO-Stringy (2.110) [ 2 ][ DONE ] > IO-Socket-SSL (2.066) [ 2 ][ DONE ] > Unix-Syslog (0.100) [ 4 ][ DONE ] > Mail-Tools (2.07) [ 2 ][ DONE ] > MIME-Tools (5.509) [ 2 ][ DONE ] > Net-Server (0.97) [ 2 ][ DONE ] > Convert-TNEF (0.17) [ 2 ][ DONE ] > Convert-UUlib (1.06) [ 7 ][ DONE ] > Archive-Tar (1.29) [ 2 ][ DONE ] > Archive-Zip (1.16) [ 2 ][ DONE ] > Text-Tabs+Wrap (2005.0824) [ 2 ][ DONE ] > Locale-Country (3.33) [ 2 ][ DONE ] > XML-Parser (2.34) [ 8 ][ DONE ] > Crypt-PasswdMD5 (1.3) [ 1 ][ DONE ] > Net-Telnet (3.03) [ 2 ][ DONE ] > python-setuptools (0.6c11) [ 1 ][ DONE ] > python-clientform (0.2.9) [ 1 ][ DONE ] > python-mechanize (0.1.8) [ 1 ][ DONE ] > python-feedparser (4.1) [ 1 ][ DONE ] > python-rssdler (0.4.0a) [ 1 ][ DONE ] > python-inotify (0.2.7) [ 1 ][ DONE ] > python-docutils (0.12) [ 2 ][ DONE ] > python-daemon (2.1.1) [ 1 ][ DONE ] > python-ipaddress (3.4.1) [ 1 ][ DONE ] > glib (2.54.3) [ 2:24 ][ DONE ] > GeoIP (1.25) [ 2 ][ DONE ] > geoip-database (20191217) [ 4 ][ DONE ] > ntp (4.2.8p14) [ 2:04 ][ DONE ] > openssh (8.1p1) [ 1:44 ][ DONE ] > fontconfig (2.12.1) [ 27 ][ DONE ] > dejavu-fonts-ttf (2.33) [ 2 ][ DONE ] > ubuntu-font-family (0.83) [ 1 ][ DONE ] > freefont (20060126) [ 1 ][ DONE ] > pixman (0.34.0) [ 36 ][ FAIL ] > > {standard input}:17826: Error: selected processor does not support `tmrrc r0,r1,wr0' in ARM mode > {standard input}:17830: Error: selected processor does not support `wldrd wr10,[sp],#8' in ARM mode > {standard input}:17857: Error: selected processor does not support `wstrd wr10,[sp,#-8]!' in ARM mode > {standard input}:17862: Error: selected processor does not support `wldrd wr6,.L2509' in ARM mode > {standard input}:17863: Error: selected processor does not support `wldrd wr4,.L2509+8' in ARM mode > {standard input}:17864: Error: selected processor does not support `wxor wr2,wr2,wr2' in ARM mode > {standard input}:17872: Error: selected processor does not support `tmcrr wr10,r6,r7' in ARM mode > {standard input}:17874: Error: selected processor does not support `wunpckilb wr10,wr10,wr2' in ARM mode > {standard input}:17877: Error: selected processor does not support `tmcrr wr8,r6,r7' in ARM mode > {standard input}:17879: Error: selected processor does not support `wunpckilb wr8,wr8,wr2' in ARM mode > {standard input}:17880: Error: selected processor does not support `wmulul wr8,wr8,wr10' in ARM mode > {standard input}:17881: Error: selected processor does not support `waddhus wr8,wr8,wr6' in ARM mode > {standard input}:17882: Error: selected processor does not support `wmulum wr8,wr8,wr4' in ARM mode > {standard input}:17884: Error: selected processor does not support `tmcrr wr0,r6,r7' in ARM mode > {standard input}:17885: Error: selected processor does not support `wunpckilb wr0,wr0,wr2' in ARM mode > {standard input}:17886: Error: selected processor does not support `wshufh wr0,wr0,#255' in ARM mode > {standard input}:17887: Error: selected processor does not support `wmulul wr0,wr8,wr0' in ARM mode > {standard input}:17889: Error: selected processor does not support `waddhus wr0,wr0,wr6' in ARM mode > {standard input}:17890: Error: selected processor does not support `wmulum wr0,wr0,wr4' in ARM mode > {standard input}:17891: Error: selected processor does not support `wpackhus wr0,wr0,wr2' in ARM mode > {standard input}:17892: Error: selected processor does not support `tmrrc r0,r1,wr0' in ARM mode > {standard input}:17896: Error: selected processor does not support `wldrd wr10,[sp],#8' in ARM mode > make[3]: *** [Makefile:1123: libpixman_iwmmxt_la-pixman-mmx.lo] Error 1 > make[3]: *** Waiting for unfinished jobs.... > make[3]: Leaving directory '/usr/src/pixman-0.34.0/pixman' > make[2]: *** [Makefile:503: all-recursive] Error 1 > make[2]: Leaving directory '/usr/src/pixman-0.34.0' > make[1]: *** [Makefile:410: all] Error 2 > make[1]: Leaving directory '/usr/src/pixman-0.34.0' > make: *** [pixman:74: /usr/src/log/pixman-0.34.0] Error 2 > > ERROR: Building pixman [ FAIL ] > Check /build/nightly/next/log/_build.ipfire.log for errors if applicable[ FAIL ]

1 0

vnstat 2.6 - testing
by Matthias Fischer 22 Mar '20

22 Mar '20

Hi, JFYI I attached two files: I found one glitch(?): During copying data, I observed a significant increase in 'cached memory' (see attachment:=> memory_after_copy.png). I don't know, if this could lead to problems, but it's very noticeable. Secondly, during the copying process exactly 2.206.152.829 Bytes were sent at 100Mbit/s (old machine). As one can see in 'vnstat_graph_after_copy.png', these were logged as "2.14 GiB" (The 13:00 counters were close to "0" before I started). I can't test with 1Gbit/s - is this precision good enough? ;-) Best, Matthias -- tails, linux, USB, CD, secure desktop, IRC, truecrypt, tor, onion

2 3

Test mail - please ignore
by Matthias Fischer 22 Mar '20

22 Mar '20

All is rejected because of SPAM!?

2 2

[PATCH] smartmontools: update to 7.1
by Peter Müller 22 Mar '20

22 Mar '20

Summary: smartmontools release 7.1 ----------------------------------------------------------- - smartctl: Fixed bogus exception on unknown form factor value (regression). - smartctl '--json=cg': Suppresses extra spaces also in 'g' format. - smartctl '-i': ATA ACS-4 and ACS-5 enhancements. - smartd: No longer truncates very long device names in warning emails. - smartd: No longer skips scheduled tests if system clock has been adjusted to the past. - smartd '-A': Attribute logs now use local time instead of UTC. - ATA: Device type '-d jmb39x,N' for drives behind JMicron JMB39x RAID port multipliers. - SCSI: Workaround for incomplete Log subpages response from some SAS SSDs. - HDD, SSD and USB additions to drive database. - Autodetection of '-d sntjmicron' type for JMicron USB to NVMe bridges. - configure: Defines '_FORTIFY_SOURCE=2' if supported and not defined. - Linux/FreeBSD: Fixed segfault on CCISS transfer sizes > 512 bytes. - Linux: Fixed smartd.service 'Type' if libsystemd-dev is not available. - Linux: Fixed '/dev/megaraid_sas_ioctl_node' fd leak. - Linux: Fixed GPL licensing problem of 'linux_nvme_ioctl.h'. - FreeBSD update-smart-drivedb: Now uses 'fetch' as default download tool. - FreeBSD big endian: Fixed NVMe access. - FreeBSD: Compile fix for FreeBSD 12. - NetBSD: Fixed device scan crash on empty name list. - NetBSD: Fixed memory leak in device scan. - Windows: Fixed log page access via Windows 10 NVMe driver for NVMe 1.2.1+. - Windows: Allow drive letters as device names for Windows 10 NVMe driver. - Windows: Workround to allow CSMI access to devices behind AMD RAID drivers. - Windows: Fixed MinGW options to add relocation info if ASLR is enabled. - Windows wtssendmsg: No longer writes '\n' line endings to event log. - Windows wtssendmsg: New options '-t' and '-w'. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- lfs/smartmontools | 7 +++---- src/patches/smartmontools-6.5-exit_segfault.patch | 16 ---------------- 2 files changed, 3 insertions(+), 20 deletions(-) delete mode 100644 src/patches/smartmontools-6.5-exit_segfault.patch diff --git a/lfs/smartmontools b/lfs/smartmontools index 2c3fd39d8..98f6a5eca 100644 --- a/lfs/smartmontools +++ b/lfs/smartmontools @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 6.6 +VER = 7.1 THISAPP = smartmontools-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 9ae2c6e7131cd2813edcc65cbe5f223f +$(DL_FILE)_MD5 = 430cd5f64caa4524018b536e5ecd9c29 install : $(TARGET) @@ -70,7 +70,6 @@ $(subst %,%_MD5,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/smartmontools-6.5-exit_segfault.patch cd $(DIR_APP) && autoreconf cd $(DIR_APP) && ./configure --prefix=/usr cd $(DIR_APP) && make BUILD_INFO='"($(NAME) $(VERSION))"' $(MAKETUNING) diff --git a/src/patches/smartmontools-6.5-exit_segfault.patch b/src/patches/smartmontools-6.5-exit_segfault.patch deleted file mode 100644 index 6c5df8aac..000000000 --- a/src/patches/smartmontools-6.5-exit_segfault.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/utility.h Sun Apr 24 16:59:15 2016 -+++ b/utility.h Sat Aug 20 22:40:33 2016 -@@ -97,7 +97,11 @@ - - // Replacement for exit(status) - // (exit is not compatible with C++ destructors) --#define EXIT(status) { throw (int)(status); } -+ -+//This doesn't work on IPFire. -+//#define EXIT(status) { throw (int)(status); } -+//tried to use exit and found no problems yet -+#define EXIT(status) { exit ((int)(status)); } - - // Compile time check of byte ordering - // (inline const function allows compiler to remove dead code) - -- 2.16.4

2 1

[PATCH] spectre-meltdown-checker: update to 0.43
by Peter Müller 22 Mar '20

22 Mar '20

Please refer to https://github.com/speed47/spectre-meltdown-checker/releases/tag/v0.43 for release notes. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- lfs/spectre-meltdown-checker | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/lfs/spectre-meltdown-checker b/lfs/spectre-meltdown-checker index 6c540dfa5..53eaef037 100644 --- a/lfs/spectre-meltdown-checker +++ b/lfs/spectre-meltdown-checker @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2019 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 0.42 +VER = 0.43 THISAPP = spectre-meltdown-checker-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = spectre-meltdown-checker -PAK_VER = 3 +PAK_VER = 4 DEPS = "" @@ -44,7 +44,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = c8aca684284d604adb67cb6d9d07ce70 +$(DL_FILE)_MD5 = 05cd2e53edbdcccfc072a66fafa4ea38 install : $(TARGET) -- 2.16.4

2 1

Contributing to IPFire by working on bugs
by List 20 Mar '20

20 Mar '20

Hello *, I was hoping to be able to start contributing to IPFire by resolving some bugs. How do newcomers do that ? Do I need a bugzilla account ? (https://bugzilla.readthedocs.io/en/5.0/using/creating-an-account.html) The documentation requires me to visit the homepage and create a new account. Which is not possible. It is pretty much plausible that I am just being blind. Could you help me out here ? I'd really appreciate it. Thanks for you time. Best regards, Stephan

2 2

[PATCH] binutils: update to 2.34
by Peter Müller 20 Mar '20

20 Mar '20

Due to missing build hardware for ARMv5 and ARM64 architecture, this patch updates the rootfiles for i586 and x86_64 only. I would like to ask somebody capable of the missing architectures to do the corresponding rootfile updates for me. Thank you. Cc: Arne Fitzenreiter <arne.fitzenreiter(a)ipfire.org> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/common/i586/binutils | 17 +++++++++++++++-- config/rootfiles/common/x86_64/binutils | 17 +++++++++++++++-- lfs/binutils | 6 +++--- 3 files changed, 33 insertions(+), 7 deletions(-) diff --git a/config/rootfiles/common/i586/binutils b/config/rootfiles/common/i586/binutils index 2d4f12a33..4e2014d02 100644 --- a/config/rootfiles/common/i586/binutils +++ b/config/rootfiles/common/i586/binutils @@ -18,11 +18,24 @@ usr/bin/strings #usr/include/bfd.h #usr/include/bfd_stdint.h #usr/include/bfdlink.h +#usr/include/ctf-api.h +#usr/include/ctf.h #usr/include/diagnostics.h #usr/include/dis-asm.h #usr/include/libiberty.h #usr/include/plugin-api.h #usr/include/symcat.h +#usr/lib/libbfd-2.34.so +#usr/lib/libctf-nobfd.a +#usr/lib/libctf-nobfd.la +#usr/lib/libctf-nobfd.so +#usr/lib/libctf-nobfd.so.0 +#usr/lib/libctf-nobfd.so.0.0.0 +#usr/lib/libctf.a +#usr/lib/libctf.la +#usr/lib/libctf.so +#usr/lib/libctf.so.0 +#usr/lib/libctf.so.0.0.0 #usr/lib/ldscripts #usr/lib/ldscripts/elf32_x86_64.x #usr/lib/ldscripts/elf32_x86_64.xbn @@ -156,11 +169,11 @@ usr/bin/strings #usr/lib/ldscripts/elf_x86_64.xu #usr/lib/ldscripts/elf_x86_64.xw #usr/lib/ldscripts/elf_x86_64.xwe -usr/lib/libbfd-2.32.so +usr/lib/libbfd-2.34.so #usr/lib/libbfd.a #usr/lib/libbfd.la #usr/lib/libbfd.so -usr/lib/libopcodes-2.32.so +usr/lib/libopcodes-2.34.so #usr/lib/libopcodes.a #usr/lib/libopcodes.la #usr/lib/libopcodes.so diff --git a/config/rootfiles/common/x86_64/binutils b/config/rootfiles/common/x86_64/binutils index 2d4f12a33..4e2014d02 100644 --- a/config/rootfiles/common/x86_64/binutils +++ b/config/rootfiles/common/x86_64/binutils @@ -18,11 +18,24 @@ usr/bin/strings #usr/include/bfd.h #usr/include/bfd_stdint.h #usr/include/bfdlink.h +#usr/include/ctf-api.h +#usr/include/ctf.h #usr/include/diagnostics.h #usr/include/dis-asm.h #usr/include/libiberty.h #usr/include/plugin-api.h #usr/include/symcat.h +#usr/lib/libbfd-2.34.so +#usr/lib/libctf-nobfd.a +#usr/lib/libctf-nobfd.la +#usr/lib/libctf-nobfd.so +#usr/lib/libctf-nobfd.so.0 +#usr/lib/libctf-nobfd.so.0.0.0 +#usr/lib/libctf.a +#usr/lib/libctf.la +#usr/lib/libctf.so +#usr/lib/libctf.so.0 +#usr/lib/libctf.so.0.0.0 #usr/lib/ldscripts #usr/lib/ldscripts/elf32_x86_64.x #usr/lib/ldscripts/elf32_x86_64.xbn @@ -156,11 +169,11 @@ usr/bin/strings #usr/lib/ldscripts/elf_x86_64.xu #usr/lib/ldscripts/elf_x86_64.xw #usr/lib/ldscripts/elf_x86_64.xwe -usr/lib/libbfd-2.32.so +usr/lib/libbfd-2.34.so #usr/lib/libbfd.a #usr/lib/libbfd.la #usr/lib/libbfd.so -usr/lib/libopcodes-2.32.so +usr/lib/libopcodes-2.34.so #usr/lib/libopcodes.a #usr/lib/libopcodes.la #usr/lib/libopcodes.so diff --git a/lfs/binutils b/lfs/binutils index 7df005146..334adad25 100644 --- a/lfs/binutils +++ b/lfs/binutils @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2017 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 2.32 +VER = 2.34 THISAPP = binutils-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -94,7 +94,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 0d174cdaf85721c5723bf52355be41e6 +$(DL_FILE)_MD5 = 664ec3a2df7805ed3464639aaae332d6 install : $(TARGET) -- 2.16.4

2 4

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development March 2020