Development July 2022

development@lists.ipfire.org

14 participants
76 discussions

[PATCH v2] Core Update 170: Harden mount options of /boot on existing installations
by Peter Müller 28 Jul '22

28 Jul '22

The second version of this patch uses @ instead of / for sed delimiters, which makes the command less hard to read. Since Core Update 170 already requires a reboot at this point, the respective directive is omitted. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/core/170/update.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/config/rootfiles/core/170/update.sh b/config/rootfiles/core/170/update.sh index 7dde03060..78a4709bc 100644 --- a/config/rootfiles/core/170/update.sh +++ b/config/rootfiles/core/170/update.sh @@ -110,6 +110,9 @@ chown nobody:nobody /var/lib/ipblocklist # Start services /etc/init.d/rc.d/unbound start +# Harden mount options of /boot +sed -e -i "s@[[:space:]]*\/boot[[:space:]]*auto[[:space:]]*defaults[[:space:]]*@ \/boot auto defaults,nodev,noexec,nosuid @g" /etc/fstab + # This update needs a reboot... touch /var/run/need_reboot -- 2.35.3

2 7

[PATCH] installer: Harden mount options of /boot partition
by Peter Müller 28 Jul '22

28 Jul '22

Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- src/installer/hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/installer/hw.c b/src/installer/hw.c index 12f8e793d..0ed6050b3 100644 --- a/src/installer/hw.c +++ b/src/installer/hw.c @@ -1,7 +1,7 @@ /*############################################################################# # # # IPFire - An Open Source Firewall Distribution # -# Copyright (C) 2014 IPFire development team # +# Copyright (C) 2007-2022 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -1134,7 +1134,7 @@ int hw_write_fstab(struct hw_destination* dest) { uuid = hw_get_uuid(dest->part_boot); if (uuid) { - fprintf(f, FSTAB_FMT, uuid, "/boot", "auto", "defaults", 1, 2); + fprintf(f, FSTAB_FMT, uuid, "/boot", "auto", "defaults,nodev,noexec,nosuid", 1, 2); free(uuid); } } -- 2.35.3

2 1

[PATCH] linux: Update to 5.15.57
by Peter Müller 28 Jul '22

28 Jul '22

Please refer to https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.57 for the changelog of this version. Since it introduces architecture-dependent rootfile changes due to CPU side-channel mitigations, changes to ARM rootfiles have been omitted due to the lack of hardware. Supposed hardening changes will be submitted separately. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/common/x86_64/linux | 9 +++++++-- lfs/linux | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/config/rootfiles/common/x86_64/linux b/config/rootfiles/common/x86_64/linux index 326bc6c6e..f81b5589d 100644 --- a/config/rootfiles/common/x86_64/linux +++ b/config/rootfiles/common/x86_64/linux @@ -6785,6 +6785,7 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/CC_HAS_INT128 #lib/modules/KVER-ipfire/build/include/config/CC_HAS_KASAN_GENERIC #lib/modules/KVER-ipfire/build/include/config/CC_HAS_NO_PROFILE_FN_ATTR +#lib/modules/KVER-ipfire/build/include/config/CC_HAS_RETURN_THUNK #lib/modules/KVER-ipfire/build/include/config/CC_HAS_SANCOV_TRACE_PC #lib/modules/KVER-ipfire/build/include/config/CC_HAS_SANE_STACKPROTECTOR #lib/modules/KVER-ipfire/build/include/config/CC_HAS_SLS @@ -6877,6 +6878,8 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/CPU_FREQ_GOV_SCHEDUTIL #lib/modules/KVER-ipfire/build/include/config/CPU_FREQ_GOV_USERSPACE #lib/modules/KVER-ipfire/build/include/config/CPU_FREQ_STAT +#lib/modules/KVER-ipfire/build/include/config/CPU_IBPB_ENTRY +#lib/modules/KVER-ipfire/build/include/config/CPU_IBRS_ENTRY #lib/modules/KVER-ipfire/build/include/config/CPU_IDLE #lib/modules/KVER-ipfire/build/include/config/CPU_IDLE_GOV_HALTPOLL #lib/modules/KVER-ipfire/build/include/config/CPU_IDLE_GOV_LADDER @@ -6889,6 +6892,7 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/CPU_SUP_HYGON #lib/modules/KVER-ipfire/build/include/config/CPU_SUP_INTEL #lib/modules/KVER-ipfire/build/include/config/CPU_SUP_ZHAOXIN +#lib/modules/KVER-ipfire/build/include/config/CPU_UNRET_ENTRY #lib/modules/KVER-ipfire/build/include/config/CRASH_DUMP #lib/modules/KVER-ipfire/build/include/config/CRC16 #lib/modules/KVER-ipfire/build/include/config/CRC32 @@ -9088,7 +9092,6 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/NFSD_V4_SECURITY_LABEL #lib/modules/KVER-ipfire/build/include/config/NFS_ACL_SUPPORT #lib/modules/KVER-ipfire/build/include/config/NFS_COMMON -#lib/modules/KVER-ipfire/build/include/config/NFS_DEBUG #lib/modules/KVER-ipfire/build/include/config/NFS_DISABLE_UDP_SUPPORT #lib/modules/KVER-ipfire/build/include/config/NFS_FS #lib/modules/KVER-ipfire/build/include/config/NFS_FSCACHE @@ -9586,6 +9589,7 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/RELOCATABLE #lib/modules/KVER-ipfire/build/include/config/RENESAS_PHY #lib/modules/KVER-ipfire/build/include/config/RESET_CONTROLLER +#lib/modules/KVER-ipfire/build/include/config/RETHUNK #lib/modules/KVER-ipfire/build/include/config/RETPOLINE #lib/modules/KVER-ipfire/build/include/config/RETU_WATCHDOG #lib/modules/KVER-ipfire/build/include/config/RFKILL @@ -10333,6 +10337,7 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/SPARSEMEM_VMEMMAP #lib/modules/KVER-ipfire/build/include/config/SPARSEMEM_VMEMMAP_ENABLE #lib/modules/KVER-ipfire/build/include/config/SPARSE_IRQ +#lib/modules/KVER-ipfire/build/include/config/SPECULATION_MITIGATIONS #lib/modules/KVER-ipfire/build/include/config/SPLIT_PTLOCK_CPUS #lib/modules/KVER-ipfire/build/include/config/SPMI #lib/modules/KVER-ipfire/build/include/config/SRCU @@ -10374,7 +10379,6 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/config/SUNGEM_PHY #lib/modules/KVER-ipfire/build/include/config/SUNRPC #lib/modules/KVER-ipfire/build/include/config/SUNRPC_BACKCHANNEL -#lib/modules/KVER-ipfire/build/include/config/SUNRPC_DEBUG #lib/modules/KVER-ipfire/build/include/config/SUNRPC_GSS #lib/modules/KVER-ipfire/build/include/config/SURFACE_HOTPLUG #lib/modules/KVER-ipfire/build/include/config/SURFACE_PLATFORMS @@ -13460,6 +13464,7 @@ etc/modprobe.d/ipv6.conf #lib/modules/KVER-ipfire/build/include/linux/mmu_context.h #lib/modules/KVER-ipfire/build/include/linux/mmu_notifier.h #lib/modules/KVER-ipfire/build/include/linux/mmzone.h +#lib/modules/KVER-ipfire/build/include/linux/mnt_idmapping.h #lib/modules/KVER-ipfire/build/include/linux/mnt_namespace.h #lib/modules/KVER-ipfire/build/include/linux/mod_devicetable.h #lib/modules/KVER-ipfire/build/include/linux/mod_devicetable.h.orig diff --git a/lfs/linux b/lfs/linux index 384ed9d89..07e838933 100644 --- a/lfs/linux +++ b/lfs/linux @@ -24,7 +24,7 @@ include Config -VER = 5.15.49 +VER = 5.15.57 ARM_PATCHES = 5.15-ipfire5 THISAPP = linux-$(VER) @@ -78,7 +78,7 @@ objects =$(DL_FILE) \ $(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE) arm-multi-patches-$(ARM_PATCHES).patch.xz = $(URL_IPFIRE)/arm-multi-patches-$(ARM_PATCHES).patch.xz -$(DL_FILE)_BLAKE2 = 0f78d980b2d6ec189865a85f3bf65e015365034f797ffda88077a77162d3bc30aec5f44a5257aa2aee0a97ee12e4c38b796bc8fddbe9f6ff6067b0c17ff0207e +$(DL_FILE)_BLAKE2 = 9adea6b8ee97ead38ecab39b1ef08b2ee1647eebbb2a8ccd2ba253eeebfd6435c83a03e83e186809473a982a373185874c0082aa0c56f5928d304c7df56dfb86 arm-multi-patches-$(ARM_PATCHES).patch.xz_BLAKE2 = 58a70e757a9121a0aac83604a37aa787ec7ac0ee4970c5a3ac3bcb2dbaca32b00089cae6c0da5cf2fe0a2e156427b5165c6a86e0371a3e896f4c7cdd699c34a0 install : $(TARGET) -- 2.35.3

2 1

[PATCH] CUPS: Update to 2.4.2
by Peter Müller 28 Jul '22

28 Jul '22

Please refer to https://github.com/OpenPrinting/cups/releases/tag/v2.4.2 for the release notes of this version. Most notably for IPFire, it comes with OpenSSL support again. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- lfs/cups | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lfs/cups b/lfs/cups index 312f165d8..e500ac2e7 100644 --- a/lfs/cups +++ b/lfs/cups @@ -24,7 +24,7 @@ include Config -VER = 2.4.1 +VER = 2.4.2 SUMMARY = The Common UNIX Printing System THISAPP = cups-$(VER) @@ -33,7 +33,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/cups-$(VER) TARGET = $(DIR_INFO)/$(THISAPP) PROG = cups -PAK_VER = 28 +PAK_VER = 29 DEPS = avahi cups-filters dbus ghostscript @@ -47,7 +47,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 690d9d92f9bc84c2bb360699191cd67e1489ffc3ab219376dfc1a8795379950c95bf58c2033a0dbd2918262c5d104e21e31c4585cb35d229b0fac6cf4967bfd7 +$(DL_FILE)_BLAKE2 = 97053feb502d4fdc28810b806000b6c84a6795d5adcec0789e73e5477d5802d46a99381366d16219f627166df088f6decde5c144bd0c38b5745815dc1e426bc5 install : $(TARGET) -- 2.35.3

2 1

[PATCH] kmod: Update to 30
by Peter Müller 28 Jul '22

28 Jul '22

Please refer to the tarballs's NEWS file for release announcements. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/common/kmod | 2 +- lfs/kmod | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/config/rootfiles/common/kmod b/config/rootfiles/common/kmod index f46db860b..78971ea22 100644 --- a/config/rootfiles/common/kmod +++ b/config/rootfiles/common/kmod @@ -9,6 +9,6 @@ sbin/rmmod #usr/lib/libkmod.la #usr/lib/libkmod.so usr/lib/libkmod.so.2 -usr/lib/libkmod.so.2.3.7 +usr/lib/libkmod.so.2.4.0 #usr/lib/pkgconfig/libkmod.pc #usr/share/bash-completion/completions/kmod diff --git a/lfs/kmod b/lfs/kmod index ad12065c7..89e196252 100644 --- a/lfs/kmod +++ b/lfs/kmod @@ -24,7 +24,7 @@ include Config -VER = 29 +VER = 30 THISAPP = kmod-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 1362b6e7c07f66594074f07239d0f7a64e6efeb928483ed027b22a4ac77b916c631d1c03780b0515714a87847a716c35341edb1ced04a1795b4c7f8942d3207a +$(DL_FILE)_BLAKE2 = c5cb690dbb8fad66ac603648ff330794b417ff2fa2f8f61b6e9cb76dab93f984128b3d83a826203f39f3fb94f174f0db7395db6a47e52e8b7c561486f9d00778 install : $(TARGET) -- 2.35.3

2 1

[PATCH] Samba: Update to 4.16.4
by Peter Müller 28 Jul '22

28 Jul '22

This is a security release, please refer to https://www.samba.org/samba/latest_news.html#4.16.4 for the respective advisory. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/packages/aarch64/samba | 2 ++ config/rootfiles/packages/armv6l/samba | 2 ++ config/rootfiles/packages/x86_64/samba | 2 ++ lfs/samba | 8 ++++---- 4 files changed, 10 insertions(+), 4 deletions(-) diff --git a/config/rootfiles/packages/aarch64/samba b/config/rootfiles/packages/aarch64/samba index 49d924537..a049902b0 100644 --- a/config/rootfiles/packages/aarch64/samba +++ b/config/rootfiles/packages/aarch64/samba @@ -186,6 +186,7 @@ usr/lib/libsmbclient.so.0 usr/lib/libsmbclient.so.0.7.0 usr/lib/libsmbconf.so usr/lib/libsmbconf.so.0 +usr/lib/libsmbconf.so.0.0.1 usr/lib/libsmbldap.so usr/lib/libsmbldap.so.2 usr/lib/libsmbldap.so.2.1.0 @@ -495,6 +496,7 @@ usr/lib/python3.10/site-packages/samba/tdb_util.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_base_test.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tgs_tests.py +#usr/lib/python3.10/site-packages/samba/tests/krb5/kpasswd_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/ms_kile_client_principal_lookup_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/pac_align_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/raw_testcase.py diff --git a/config/rootfiles/packages/armv6l/samba b/config/rootfiles/packages/armv6l/samba index 440f29cb2..dec46311b 100644 --- a/config/rootfiles/packages/armv6l/samba +++ b/config/rootfiles/packages/armv6l/samba @@ -186,6 +186,7 @@ usr/lib/libsmbclient.so.0 usr/lib/libsmbclient.so.0.7.0 usr/lib/libsmbconf.so usr/lib/libsmbconf.so.0 +usr/lib/libsmbconf.so.0.0.1 usr/lib/libsmbldap.so usr/lib/libsmbldap.so.2 usr/lib/libsmbldap.so.2.1.0 @@ -495,6 +496,7 @@ usr/lib/python3.10/site-packages/samba/tdb_util.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_base_test.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tgs_tests.py +#usr/lib/python3.10/site-packages/samba/tests/krb5/kpasswd_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/ms_kile_client_principal_lookup_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/pac_align_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/raw_testcase.py diff --git a/config/rootfiles/packages/x86_64/samba b/config/rootfiles/packages/x86_64/samba index 8e355e873..66b210a08 100644 --- a/config/rootfiles/packages/x86_64/samba +++ b/config/rootfiles/packages/x86_64/samba @@ -186,6 +186,7 @@ usr/lib/libsmbclient.so.0 usr/lib/libsmbclient.so.0.7.0 usr/lib/libsmbconf.so usr/lib/libsmbconf.so.0 +usr/lib/libsmbconf.so.0.0.1 usr/lib/libsmbldap.so usr/lib/libsmbldap.so.2 usr/lib/libsmbldap.so.2.1.0 @@ -495,6 +496,7 @@ usr/lib/python3.10/site-packages/samba/tdb_util.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_base_test.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/kdc_tgs_tests.py +#usr/lib/python3.10/site-packages/samba/tests/krb5/kpasswd_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/ms_kile_client_principal_lookup_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/pac_align_tests.py #usr/lib/python3.10/site-packages/samba/tests/krb5/raw_testcase.py diff --git a/lfs/samba b/lfs/samba index a48a0ecb1..87d192492 100644 --- a/lfs/samba +++ b/lfs/samba @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2022 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 4.16.0 +VER = 4.16.4 SUMMARY = A SMB/CIFS File, Print, and Authentication Server THISAPP = samba-$(VER) @@ -33,7 +33,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = samba -PAK_VER = 85 +PAK_VER = 86 DEPS = avahi cups libtirpc perl-Parse-Yapp perl-JSON @@ -47,7 +47,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 6ea27634690d00779ec7f671e48b17246285c9576221d9b9b3f9238cd72310e8aaaeb646031212e65c239d2e959deef7bd9739932db0c716b7ea79cc11f2f7b8 +$(DL_FILE)_BLAKE2 = e685511a76770272cabd1292f36d2b005e2d21212e4782cdf4fd05039f7667b35501873cffa9a53547d523805b2a91ffeba0881aaee905304968c42efef22dfa install : $(TARGET) -- 2.35.3

1 0

[PATCH] clamav: Update to 0.105.1
by Matthias Fischer 27 Jul '22

27 Jul '22

For details see: https://blog.clamav.net/2022/07/clamav-01037-01041-and-01051-patch.html "ClamAV 0.105.1 is a critical patch release with the following fixes: Upgrade the vendored UnRAR library to version 6.1.7. Fix issue building macOS universal binaries in some configurations. Silence error message when the logical signature maximum functionality level is lower than the current functionality level. Fix scan error when scanning files containing malformed images that cannot be loaded to calculate an image fuzzy hash. Fix logical signature "Intermediates" feature. Relax constraints on slightly malformed ZIP archives that contain overlapping file entries." Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- config/rootfiles/packages/clamav | 1 + lfs/clamav | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/config/rootfiles/packages/clamav b/config/rootfiles/packages/clamav index ca3124bb2..588c34eb4 100644 --- a/config/rootfiles/packages/clamav +++ b/config/rootfiles/packages/clamav @@ -56,6 +56,7 @@ usr/sbin/clamd #usr/share/doc/ClamAV/html/clipboard.min.js #usr/share/doc/ClamAV/html/community_resources #usr/share/doc/ClamAV/html/community_resources/CommunityResources.html +#usr/share/doc/ClamAV/html/community_resources/CompileClamAV_AmazonLinux2.txt #usr/share/doc/ClamAV/html/css #usr/share/doc/ClamAV/html/css/chrome.css #usr/share/doc/ClamAV/html/css/general.css diff --git a/lfs/clamav b/lfs/clamav index 1a4913089..bcb996c4f 100644 --- a/lfs/clamav +++ b/lfs/clamav @@ -26,7 +26,7 @@ include Config SUMMARY = Antivirus Toolkit -VER = 0.105.0 +VER = 0.105.1 THISAPP = clamav-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = clamav -PAK_VER = 60 +PAK_VER = 61 DEPS = @@ -50,7 +50,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 2c3055c3c5de115e01b6c0decee21c061c0583171c1794a38ecd86f354765879a6a2b7f2653c67fc19273dfc0caa9da8a2bbe339854e4c0d237baf3f3c650813 +$(DL_FILE)_BLAKE2 = be46d9afd76fb536d7de7363a45d38fef6a5983011e3cd0dcc25c2a209c8d37a2bbe1f7f4a5694152cabf622ef83e072b892ae12ba404da1955bb5b654e5216d install : $(TARGET) -- 2.25.1

2 1

[PATCH] logs.cgi/ids.dat: Proper display logged events.
by Stefan Schantl 26 Jul '22

26 Jul '22

Fix the regular expression to proper display the logged IDS events. Fixes #12899. Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org> --- html/cgi-bin/logs.cgi/ids.dat | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/html/cgi-bin/logs.cgi/ids.dat b/html/cgi-bin/logs.cgi/ids.dat index 35c0dd1fd..7991e3936 100644 --- a/html/cgi-bin/logs.cgi/ids.dat +++ b/html/cgi-bin/logs.cgi/ids.dat @@ -414,7 +414,7 @@ sub processevent } ($title,$classification,$priority,$date,$time,$srcip,$srcport,$destip,$destport,$sid) = ("n/a","n/a","n/a","n/a","n/a","n/a","n/a","n/a","n/a", "n/a"); @refs = (); - $_ =~ m/:([0-9]{1,5})\] (.*) \[\*\*\]/; + $_ =~ m/:([0-9]{1,10})\] (.*) \[\*\*\]/; $title = &Header::cleanhtml($2,"y"); } if ($_ =~ m/Classification: (.*)\] \[Priority: (\d)\]/) { -- 2.30.2

1 0

parted is missing from addons list
by Adolf Belka 26 Jul '22

26 Jul '22

Hi all, From a discussion on the forum it has been found that parted is no longer in the packages-list and doesn't show up on the pakfire list because of that. I don't know when it got removed from there but updates have been getting done to parted, last was in May this year by myself and it is still in the build. How do we get parted back into the packages-list on the server? Regards, Adolf

3 5

[PATCH] logwatch: Update to 7.7
by Matthias Fischer 26 Jul '22

26 Jul '22

The developers do not provide a changelog, the only comment I could find was on: https://packetstormsecurity.com/files/167798/Logwatch-7.7.html "Changes: Fixed bugs." Running here on Core 169. No seen problems. Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/logwatch | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lfs/logwatch b/lfs/logwatch index 5cd79843c..57a605ed5 100644 --- a/lfs/logwatch +++ b/lfs/logwatch @@ -24,7 +24,7 @@ include Config -VER = 7.6 +VER = 7.7 THISAPP = logwatch-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = fd7f2a7c65151dbfbd924102b01ead00f92d74a59a417361b65be972368f7ed93810feefedf1ad9bba2de5ebbc74589c3fc0a8a484f19b5a9782c9799ffdf656 +$(DL_FILE)_BLAKE2 = 8978930fe844bde372f68038f295cc62ca61f1c2b10d18f545ddcc713cb72cd01520ff0ea0869f2dff96846431a6dd9a04da1bc79817ccb590b0235f96e934da install : $(TARGET) -- 2.25.1

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development July 2022