Development February 2023

development@lists.ipfire.org

9 participants
117 discussions

[PATCH] e2fsprogs: Update to version 1.46.6
by Adolf Belka 06 Feb '23

06 Feb '23

- Update from version 1.46.5 to 1.46.6 - Update of rootfile not required - Changelog E2fsprogs 1.46.6 (February 1, 2023) UI and Features Debugfs's ncheck command now allows the inode number to be surrounded by angle brackets, to be consistent with other debugfs commands. Debugfs no longer prints a scary message when debugfs -c (which enables "catastrophic mode") is used. This was intended to allow debugfs to operate on very badly corrupted file systems, but it is now sometimes used to suppress reading the block and inode bitmaps when they are not needed. Resize2fs will round down the requested new file system size to the nearest cluster boundary when resizing bigalloc file systems. Improve error messages issued by badblocks. Fuse2fs now supports an offset= option which allows operating on a file system image which is located starting at the specified offset from the beginning of the image. Fixes Pre-v6.2 Linux kernels had long-standing bug in how the extended attribute hash was calculated when there were non-ASCII characters in the xattr name, when the hash would be different depending on whether the C 'char' type was signed or unsigned. To address this bug, starting with e2fsprogs 1.46.6+ and Linux 6.2+, we will accept either the signed or unsigned hash variant, but only set the unsigned hash variant. Since extended attribute names are in practice composed of ASCII characters, other than various tests (such as generic/454), most users will hopefully not notice this change. Avoid triggering udev in dumpe2fs and "resize2fs -P" for file systems with MMP enabled by opening the device read-only when reading the MMP block. Fix MMP handling so it can notice when another writer has modify the MMP block out from under it when stopping a MMP sessions. Fix tune2fs so it will detect another device stealing the MMP sessions while rewriting metadata checksums. E2fsck will now check to make sure the journal inode does not have the encrypt flag set. Fix a deadlock bug in e2fsck's error handler when there are errors trying to write to the file system. Fix a bug where e2fsck could fail when specifying an undo file and an explicit superblock number. Fix e2image so it won't potentially loop forever for certain invalid file systems. Fix resize2fs to honor the E2FSPROGS_FAKE_TIME environment variable. This allows embedded system builders who use resize2fs as part of their image build process to create reproducible images. Fix tune2fs to avoid a crash if the journal replay fails and to make sure its exit status is non-zero if there is some failure. Fix tune2fs, fuse2fs, and debugsfs to update j_tail_sequence when replaying the journal. Add additional bullet-proofing for very badly corrupted file systems. Try avoid UBSAN warnings, null pointer derferences, and other memory bugs. (Addresses CVE-2022-1304) Don't fail when the source directory for mke2fs -d doesn't support extended attributese. Check for and handle malloc() failures when computing the log filename in e2fsck and in the libss library. Fix tune2fs and e2fsck to accept pathames which include '=' characters. Previously arguments to tune2fs and e2fsck which included '=' characters are presumed to be blkid specifiers such as UUID=xxx or LABEL=yyy. If a specifier is both a valid pathname name and blkid tag name specifier, priority is given to a blkid resolved pathname. Improve tune2fs's error messages. Fix a bug in tune2fs which could cause it to crash if device goes off-line just as it being opened. Fix the fsck driver so if it is interrupted while running fsck -N it doesn't end up kllling all processes on the system. Fix a crash in badblocks when the user specifies an overly large number of blocks tested at a time in read/write or nondestructive mode. Update and clarify's chattr's man page and usage message. Fix spelling typo's in a variety of different man pages and comments. Performance, Internal Implementation, Development Support etc. Update to autoconf 2.71. Update flags used to create shared library on Darwin/MacOS. Speed up e2fsck's clonning of multiply-claimed blocks so it is substantially faster on very large file systems. Add tests/fuzz directory with fuzzers from oss-fuzz. Add a Github Actions configuration file so that Github will run CI tests on Linux, Windows and MacOS on a push to the e2fsprogs github repo. Make the mtab parsing in ext2fs_check_mount_point() more careful so it won't get confused when a block device shows up in the mnt_name field for a virtual file system. Fix the libss's Makefile to create the man page directory before trying to install its man page. Fix various Coverity and compiler warnings. Make tests more portable on various different OS's and system configurations (e.g., with SELinux enabled, MacOS, and Windows) Use mallinfo2() instead of mallinfo() where avilable, since mallinfo() is deprecated on newer glibc versions. E2fsck will no longer do a full scan of disconnected directory when trying to print the parent directory, which is pointless and can slow down e2fsck if there are a large number of disconnected directories. Debugfs will now print the extended attribute's e_hash field. Fix the setup-schroot script to work on non-Linux platforms. Fix ext2fs_compare_generic_bmap() so it correctly compares all of the bits in the bitmap, and so that it works correctly when comparing a bitarray bitmap with a rbtree-based bitmap. (Fortunately, none of the programs in e2fsprogs uses bitmap comparison functions.) Fix memory leaks on error paths. Add support for the configure option --enable-largefile so that e2fsprogs can utilize largefile support for the MUSL C library. Add an note that the dict library code has been modified, as required by the Kazlib license. Synchronized changes from Android's AOSP e2fsprogs tree. Updated config.guess and config.sub with newer versions from the FSF. Add Friulian translation. Update Chinese, Czech, Dutch, French, German, Malay, Polish, Serbian, Spanish, Swedish, and Ukrainian translations. Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- lfs/e2fsprogs | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lfs/e2fsprogs b/lfs/e2fsprogs index 4758b5401..c424024a8 100644 --- a/lfs/e2fsprogs +++ b/lfs/e2fsprogs @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@ include Config -VER = 1.46.5 +VER = 1.46.6 THISAPP = e2fsprogs-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 8d8c02e891c464782a7cff518c41d793fc73366b57e17d80ffc5afd96e6144e354290e667e9710509a9dde4e5dab7e7185c5bf084c5bfd26219f05e5e92e0830 +$(DL_FILE)_BLAKE2 = 683274bf9468a3aaf41e542f22266482e75522b1fd2a255c6d852a28b08f027918d4f09239259d443a243c41eae49b3c27454f7d140da2c361c36a71ff77dcf6 install : $(TARGET) -- 2.39.1

1 4

[PATCH 1/2] rng-tools: Move from core package to addon - fixes bug 12900
by Adolf Belka 05 Feb '23

05 Feb '23

- This patch is to move the rng-tools package from a core package to an addon. With the kernel changes from 5.6 rngd is no longer needed to create the required kernel entropy. - The results from HRNG's via rngd are used with an XOR after the entropy is collected by the kernel. So the HWRNG output is used to dilute the kernel random number data, which is already merged from several sources. - Based on the above and @Paul's request in the bug report to have rng-tools kept as an addon this patch set is submitted for consideration to keep rng-tools but as an addon. - move rng-tools rootfile from common to packages - Modify rng-tools lfs from core package to addon package - Create rng-tools pak to install and uninstall - creating rc.d links for start & stop. - Move rngd initscript from system to packages directory. - Installed into my vm testbed and confirmed that it works. No rngd daemon installed from iso install. After addon install rngd is present and running. Added various files to be able to test the services wui page. rngd shows up and can be turned off and on Fixes: Bug#12900 Tested-by: Adolf Belka <adolf.belka(a)ipfire.org> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- .../rootfiles/{common => packages}/rng-tools | 2 ++ lfs/rng-tools | 14 ++++++++- src/initscripts/{system => packages}/rngd | 0 src/paks/rng-tools/install.sh | 30 +++++++++++++++++++ src/paks/rng-tools/uninstall.sh | 28 +++++++++++++++++ src/paks/rng-tools/update.sh | 26 ++++++++++++++++ 6 files changed, 99 insertions(+), 1 deletion(-) rename config/rootfiles/{common => packages}/rng-tools (69%) rename src/initscripts/{system => packages}/rngd (100%) create mode 100644 src/paks/rng-tools/install.sh create mode 100644 src/paks/rng-tools/uninstall.sh create mode 100644 src/paks/rng-tools/update.sh diff --git a/config/rootfiles/common/rng-tools b/config/rootfiles/packages/rng-tools similarity index 69% rename from config/rootfiles/common/rng-tools rename to config/rootfiles/packages/rng-tools index 596a911c1..fbeda7800 100644 --- a/config/rootfiles/common/rng-tools +++ b/config/rootfiles/packages/rng-tools @@ -1,4 +1,6 @@ +usr/bin/randstat usr/bin/rngtest usr/sbin/rngd #usr/share/man/man1/rngtest.1 #usr/share/man/man8/rngd.8 +etc/rc.d/init.d/rngd diff --git a/lfs/rng-tools b/lfs/rng-tools index cafb1bcda..6a85a8482 100644 --- a/lfs/rng-tools +++ b/lfs/rng-tools @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2021 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -25,12 +25,19 @@ include Config VER = 6.14 +SUMMARY = This is a random number generator daemon THISAPP = rng-tools-$(VER) DL_FILE = $(THISAPP).tar.gz DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) +PROG = rng-tools +PAK_VER = 1 + +DEPS = + +SERVICES = rngd ############################################################################### # Top-level Rules @@ -50,6 +57,9 @@ download :$(patsubst %,$(DIR_DL)/%,$(objects)) b2 : $(subst %,%_BLAKE2,$(objects)) +dist: + @$(PAK) + ############################################################################### # Downloading, checking, b2sum ############################################################################### @@ -77,5 +87,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) --without-rtlsdr cd $(DIR_APP) && make $(MAKETUNING) $(EXTRA_MAKE) cd $(DIR_APP) && make $(EXTRA_INSTALL) install + #install initscript + $(call INSTALL_INITSCRIPTS,$(SERVICES)) @rm -rf $(DIR_APP) @$(POSTBUILD) diff --git a/src/initscripts/system/rngd b/src/initscripts/packages/rngd similarity index 100% rename from src/initscripts/system/rngd rename to src/initscripts/packages/rngd diff --git a/src/paks/rng-tools/install.sh b/src/paks/rng-tools/install.sh new file mode 100644 index 000000000..a53ccc43c --- /dev/null +++ b/src/paks/rng-tools/install.sh @@ -0,0 +1,30 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2023 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_files +# create startlinks +ln -sf ../init.d/rngd /etc/rc.d/rc0.d/K35rngd +ln -sf ../init.d/rngd /etc/rc.d/rc3.d/S65rngd +ln -sf ../init.d/rngd /etc/rc.d/rc6.d/K35rngd +start_service --background rngd diff --git a/src/paks/rng-tools/uninstall.sh b/src/paks/rng-tools/uninstall.sh new file mode 100644 index 000000000..cc9fbb355 --- /dev/null +++ b/src/paks/rng-tools/uninstall.sh @@ -0,0 +1,28 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2023 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +stop_service rngd +remove_files +# Remove all start links. +rm -rf /etc/rc.d/rc*.d/*rngd diff --git a/src/paks/rng-tools/update.sh b/src/paks/rng-tools/update.sh new file mode 100644 index 000000000..83bd0ad98 --- /dev/null +++ b/src/paks/rng-tools/update.sh @@ -0,0 +1,26 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2023 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +./uninstall.sh +./install.sh -- 2.39.1

4 7

[PATCH] lsof: Update to 4.98.0
by Matthias Fischer 05 Feb '23

05 Feb '23

For details see: https://github.com/lsof-org/lsof/blob/master/00DIST#L5471 "4.98.0 January 22, 2023 Fix two potential null pointer access bug when gethostbyname2() returns an empty address list Add support for older automake versions (on e.g. CentOS 7) Migrate testing scripts and programs to autotools Extend CI to build on more Linux distros [linux] Fix handling of empty command name, closing #246. Add test from #246, where lsof returns stale command name when the command name is empty. If getting command name failed, return NULL instead of empty string Add --with/without-libtirpc option to autotools-based build system and automatically detect libtirpc by default Add -H switch to print human readable size, e.g. 123.4K (#260) [linux] Fix implicit declaration error when HASPTYEPT is undefined Add support for musl libc-based Linux distros Add --enable-security argument to configure to allow only the root user to list all open files Add --enable-no-sock-security argument to configure to allow anyone to list anyone else's socket files when combined with --enable-security [linux] Always enable 64 bit off_t in configure.ac [netbsd] Import patches from pkgsrc and port autotools-based build system to NetBSD [netbsd] Fix lock status reading" Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/lsof | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/lfs/lsof b/lfs/lsof index eefaf35f5..2c654dd5b 100644 --- a/lfs/lsof +++ b/lfs/lsof @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,10 +24,10 @@ include Config -VER = 4.95.0.linux +VER = 4.98.0 -THISAPP = lsof_$(VER) -DL_FILE = $(THISAPP).tar.bz2 +THISAPP = lsof-$(VER) +DL_FILE = $(THISAPP).tar.gz DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 6a7d6353ec7f0f1e14416bff98867e64009c3f3901110c947f845bb3dcf9af3d40755c7ac6d586412a61778bc8ac355d2388cf2cfa8a975dbf4870c339c75a8c +$(DL_FILE)_BLAKE2 = 7ce5576653035bced042b07a946a09cb3c23da57a4f77a9f7bc8b8f86d531d73f0375a03fb0dc9e03f6ac18caa68bbb45144d6da13cee7ba94dfbb913fae9d03 install : $(TARGET) @@ -69,7 +69,7 @@ $(subst %,%_BLAKE2,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar xzf $(DIR_DL)/$(DL_FILE) cd $(DIR_APP) && ./Configure linux cd $(DIR_APP) && make $(MAKETUNING) CC="cc $(CFLAGS) $(LDFLAGS)" cd $(DIR_APP) && install -m 755 -o root -g root lsof /usr/bin -- 2.34.1

2 1

[PATCH] htop: Update to 3.2.2
by Matthias Fischer 05 Feb '23

05 Feb '23

For details see: https://github.com/htop-dev/htop/blob/main/ChangeLog "What's new in version 3.2.2 * CPUMeter now can show frequency in text mode * Add option to render distribution path prefixes shadowed * DiskIOMeter converts to bytes per second (not per interval) * DiskIOMeter uses complete units, including missing "iB/s" * DiskIOMeter indicates read and write in meter mode * NetworkIOMeter converts to packets per second, shows packet rate * Allow continued process following when changing display settings * Update the panel header when changing to another tab * Drop margin around the header if there are no meters * Use Unicode replacement character for non-printable characters * Default color preset uses bold blue for better visibility * Update the Panel header on sort order inversions ('I') * Toggle the header meters with pound key * Fix ScreenPanel to handle quitting the panel while renaming * Add fallback for HOME environment variable using passwd database * Replace meaningless ID column with FD column in lock screen * Use device format in the lock screen matching the files screen * On Linux, improvements to file-descriptor lock detection * On Linux, further distinguish systemd states in the SystemdMeter * On Linux, improvements to cgroup and container identification * On Linux, support openat(2) without readlinkat(2) platforms * On Darwin, fix current process buffer handling for busy systems * On DragonFly BSD, fix incorrect processor time of processes * On FreeBSD, fix an issue with the memory graph not showing correctly * On FreeBSD, add support for displaying shared memory usage * On PCP, use pmLookupDescs(3) if available for efficiency * On PCP, normalize generic columns values for consistent display * On PCP, changes preparing for configurable, dynamic screens * Handle invalid process columns from the configuration file * Avoid undefined behaviour with deeply nested processes * Fix crash when removing the currently active screen * Prevent possible crash on a very early error path * Include automake for Debian/Ubuntu * Restore non-mouse support * Reject unsupported command line arguments * Document idle process state * Clarify M_TRS/M_DRS columns" Signed-off-by: Matthias Fischer <matthias.fischer(a)ipfire.org> --- lfs/htop | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/lfs/htop b/lfs/htop index 019a844e1..faaf37047 100644 --- a/lfs/htop +++ b/lfs/htop @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org> # +# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -26,7 +26,7 @@ include Config SUMMARY = An Interactive text-mode Process Viewer for Linux -VER = 3.2.1 +VER = 3.2.2 THISAPP = htop-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = htop -PAK_VER = 19 +PAK_VER = 20 DEPS = @@ -50,7 +50,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_BLAKE2 = 7addefca7de8f0867220e6415f4585f7e6ecf655d6245e4a8e120552ac738544fde1c2d8e24ce1139209caad23994316e8be9611f6ed0253d60547158d17ff24 +$(DL_FILE)_BLAKE2 = da3b4aea4e5d32d4b432e0f45089e7795b59d9a947dc4af76cb6b7f9137e6d45901c8169c8d2c796a3f43162c1e3c8f1e18bd17f20750637e06fe4c3ebe22caa install : $(TARGET) -- 2.34.1

2 1

lsof 4.98.0?
by Matthias Fischer 05 Feb '23

05 Feb '23

Hi, I noticed that Peter ships 'lsof 4.95.0.linux' in next/master. Since Adolf was so kind to convert the problematic 'libtirpc' in https://git.ipfire.org/?p=ipfire-2.x.git;a=commit;h=024220e4dfc5993d5d64abf… (cited: "With the build based on this patch installed lsof works normally again."), can we push 'lsof 4.98.0'? I'm just doing a (last) clean build for testing and then '4.98.0' would be ready... Best, Matthias

1 0

Fwd: Our Response To PC Engines Open-Source Firmware Sponsorship Discontinuation
by Bernhard Bitsch 03 Feb '23

03 Feb '23

Hi, having the functionality of APU firmware updates, the appended announcement brings up the question how to deal with this. If there will be a paid subscription, - must each single user subscribe, IPFire delivers the framework only - can there be a subscription by IPFire, the updates are made the same way as now? Regards, Bernhard

2 1

[PATCH] kernel: update to 6.1.9
by Arne Fitzenreiter 01 Feb '23

01 Feb '23

Signed-off-by: Arne Fitzenreiter <arne_f(a)ipfire.org> --- lfs/linux | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lfs/linux b/lfs/linux index 49afc7a2f..35e5cc05e 100644 --- a/lfs/linux +++ b/lfs/linux @@ -24,7 +24,7 @@ include Config -VER = 6.1.8 +VER = 6.1.9 ARM_PATCHES = 6.1.y-ipfire0 THISAPP = linux-$(VER) @@ -78,7 +78,7 @@ objects =$(DL_FILE) \ $(DL_FILE) = $(URL_IPFIRE)/$(DL_FILE) arm-multi-patches-$(ARM_PATCHES).patch.xz = $(URL_IPFIRE)/arm-multi-patches-$(ARM_PATCHES).patch.xz -$(DL_FILE)_BLAKE2 = 1eeab95bf09757131031ebeaa3fb66f01626ecfe3b72d0044176613d027ac6643c688a0bb8f4493ae6faa3d3bf0c89fcdff3c28d7b8375e59ed6e8bd6d856e44 +$(DL_FILE)_BLAKE2 = 6e511381b4e189bad3722ef8ac3a178e24f60c78e1614b1131f2ba000c452ad447d9c9ab028fa1d150188084aed36572188d8cb9d416409c4391c3be583952fa arm-multi-patches-$(ARM_PATCHES).patch.xz_BLAKE2 = 3ef9a778c5c41ee8bf2942a48f63b21228a632a2910d2123f01155bbf571592898cffffa61c387a5a6c817b62e458947b4c406c6591b23b5401faa47b020337f install : $(TARGET) -- 2.34.1

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development February 2023