Here is the start of the Building flash-images section from _build.ipfire.log up to the time when it starts having a problem with not enough space.
Regards,
Adolf.
Aug 17 13:58:32: Building flash-images make: Entering directory '/home/ahb/sandbox/ipfire-2.x/lfs' make: Nothing to be done for 'download'. make: Leaving directory '/home/ahb/sandbox/ipfire-2.x/lfs' make: Entering directory '/usr/src/lfs' rm -rf /tmp/image.img /tmp/harddisk && mkdir -p /tmp/harddisk # Allocate image on disk dd if=/dev/zero of=/tmp/image.img bs=512 count=0 seek=$(( 8192 + 1040384 + 65536 + 3773292 )) 0+0 records in 0+0 records out 0 bytes copied, 1.534e-05 s, 0.0 kB/s losetup /dev/loop1 /tmp/image.img # Write Partition table echo -e "8192,1040384,L,*\n1048576,65536 ,U\n1114112,3773292,L\n" | sfdisk -uS /dev/loop1 Checking that no-one is using this disk right now ... OK
Disk /dev/loop1: 2.33 GiB, 2502350848 bytes, 4887404 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
Created a new DOS (MBR) disklabel with disk identifier 0x2ce22ad4.
/dev/loop1p1: Created a new partition 1 of type 'Linux' and of size 508 MiB. /dev/loop1p2: Created a new partition 2 of type 'EFI (FAT-12/16/32)' and of size 32 MiB. /dev/loop1p3: Created a new partition 3 of type 'Linux' and of size 1.8 GiB. /dev/loop1p4: Done.
New situation: Disklabel type: dos Disk identifier: 0x2ce22ad4
Device Boot Start End Sectors Size Id Type /dev/loop1p1 * 8192 1048575 1040384 508M 83 Linux /dev/loop1p2 1048576 1114111 65536 32M ef EFI (FAT-12/16/32) /dev/loop1p3 1114112 4887403 3773292 1.8G 83 Linux
The partition table has been altered. Calling ioctl() to re-read partition table. Re-reading the partition table failed.: Invalid argument The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8). Syncing disks. kpartx -v -a /dev/loop1 add map loop1p1 (253:8): 0 1040384 linear 7:1 8192 add map loop1p2 (253:9): 0 65536 linear 7:1 1048576 add map loop1p3 (253:10): 0 3773292 linear 7:1 1114112 # Format them mkfs.ext2 -F /dev/mapper/loop1p1 mke2fs 1.47.1 (20-May-2024) Discarding device blocks: 0/520192 done Creating filesystem with 520192 1k blocks and 130048 inodes Filesystem UUID: b14abac3-0899-4a1a-868a-8b9a42ecc4a0 Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409
Allocating group tables: 0/64 done Writing inode tables: 0/64 done Writing superblocks and filesystem accounting information: 0/64 done
mkfs.vfat /dev/mapper/loop1p2 mkfs.fat 4.2 (2021-01-31) mkfs.ext4 -O ^has_journal,extent -F /dev/mapper/loop1p3 mke2fs 1.47.1 (20-May-2024) Discarding device blocks: 0/471661 done Creating filesystem with 471661 4k blocks and 118080 inodes Filesystem UUID: 1ea6ca19-4421-4298-8356-da44fdeb6f49 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912
Allocating group tables: 0/15 done Writing inode tables: 0/15 done Writing superblocks and filesystem accounting information: 0/15 done
# Most systems that use Flashimages has no RTC at boot # so the interval check should disables tune2fs -i0 /dev/mapper/loop1p3 tune2fs 1.47.1 (20-May-2024) Setting interval between checks to 0 seconds # Mount root partition mount /dev/mapper/loop1p3 /tmp/harddisk # Mount boot partition mkdir -pv /tmp/harddisk/boot mkdir: created directory '/tmp/harddisk/boot' mount /dev/mapper/loop1p1 /tmp/harddisk/boot mkdir -pv /tmp/harddisk/boot/efi mkdir: created directory '/tmp/harddisk/boot/efi' mount /dev/mapper/loop1p2 /tmp/harddisk/boot/efi # Copy all files # Copy all files from /usr/src/config/rootfiles/common to /tmp/harddisk () BUILD_ARCH="x86_64" BUILDTARGET="x86_64-pc-linux-gnu" KVER="6.6.32" /usr/src/src/scripts/archive.files x86_64 /usr/src/config/rootfiles/common | tee | tar --create --format=pax --acls --xattrs --xattrs-include='*' --sparse --directory=/ --exclude="dev/pts/*" --exclude="proc/*" --exclude="tmp/*" --exclude="__pycache__" --files-from=- | tar --extract --format=pax --acls --xattrs --xattrs-include='*' --sparse --directory=/tmp/harddisk tar: usr/share/misc/magic.mgc: Wrote only 5632 of 10240 bytes tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/asm.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/autoconf.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/awk.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/c.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/cmake.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/css.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/default.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/elisp.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/groff.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/guile.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/html.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/java.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/makefile.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/man.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/nanohelp.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/nanorc.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/nftables.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/objc.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/ocaml.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/patch.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/perl.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/php.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/po.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/python.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/ruby.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/rust.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/sh.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/tcl.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/tex.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/texinfo.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/xml.nanorc: Cannot open: No such file or directory tar: usr/share/nano: Cannot mkdir: No space left on device tar: usr/share/nano/yaml.nanorc: Cannot open: No such file or directory
On 17/08/2024 21:01, Adolf Belka wrote:
I noticed that linux-firmware had not been updated since last October and with the AMD SinkClose vulnerability I thought it would be good to do an update.
However I am having problems. The build works fine with the previous linux-firmware version but with the new one I get the following failures at the flash-images stage. I have done the build from fresh with a clean before the build but it makes no difference.
The error message sequence is as follows:-
flash-images [ 6 ][ FAIL ]
tar: var/state/dhcp/dhcpd.leases: Cannot open: No such file or directory tar: var: Cannot mkdir: No space left on device tar: var/tmp: Cannot mkdir: No such file or directory tar: var: Cannot mkdir: No space left on device tar: var/updatecache: Cannot mkdir: No such file or directory tar: var/updatecache: Cannot mkdir: No such file or directory tar: var/updatecache/download: Cannot mkdir: No such file or directory tar: var/updatecache: Cannot mkdir: No such file or directory tar: var/updatecache/metadata: Cannot mkdir: No such file or directory tar: var/updatecache: Cannot mkdir: No such file or directory tar: var/updatecache/download: Cannot mkdir: No such file or directory tar: var/updatecache: Cannot mkdir: No such file or directory tar: var/updatecache/metadata: Cannot mkdir: No such file or directory tar: var: Cannot mkdir: No space left on device tar: var/urlrepo: Cannot mkdir: No such file or directory tar: etc/fonts/conf.d/10-hinting-slight.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/10-hinting-slight.conf': No space left on device tar: etc/fonts/conf.d/10-scale-bitmap-fonts.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/10-scale-bitmap-fonts.conf': No space left on device tar: etc/fonts/conf.d/10-sub-pixel-none.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/10-sub-pixel-none.conf': No space left on device tar: etc/fonts/conf.d/10-yes-antialias.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/10-yes-antialias.conf': No space left on device tar: etc/fonts/conf.d/11-lcdfilter-default.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/11-lcdfilter-default.conf': No space left on device tar: etc/fonts/conf.d/20-unhint-small-vera.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/20-unhint-small-vera.conf': No space left on device tar: etc/fonts/conf.d/30-metric-aliases.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/30-metric-aliases.conf': No space left on device tar: etc/fonts/conf.d/65-fonts-persian.conf: Cannot create symlink to '../../../usr/share/fontconfig/conf.avail/65-fonts-persian.conf': No space left on device tar: srv/web/ipfire/html/captive/assets/bootstrap-grid.min.css: Cannot create symlink to '../../../../../../usr/share/bootstrap/css/bootstrap-grid.min.css': No space left on device tar: srv/web/ipfire/html/captive/assets/bootstrap-grid.min.css.map: Cannot create symlink to '../../../../../../usr/share/bootstrap/css/bootstrap-grid.min.css.map': No space left on device tar: srv/web/ipfire/html/captive/assets/bootstrap-reboot.min.css.map: Cannot create symlink to '../../../../../../usr/share/bootstrap/css/bootstrap-reboot.min.css.map': No space left on device tar: srv/web/ipfire/html/captive/assets/bootstrap-reboot.min.css: Cannot create symlink to '../../../../../../usr/share/bootstrap/css/bootstrap-reboot.min.css': No space left on device tar: Exiting with failure status due to previous errors make: *** [flash-images:126: /usr/src/log/flash-image] Error 2 make: Leaving directory '/usr/src/lfs'
ERROR: Building flash-images [ FAIL ]
Regards,
Adolf.