New test version (004) available.
http://people.ipfire.org/~stevee/guardian-2.0/
Changelog: http://people.ipfire.org/~stevee/guardian-2.0/Changelog.txt
Installation is the same way than all previous versions.
Please do a lot of testing, I'm still lacking of feedback for
* owncloud * proper handling of reconnections on red * detection of rotating the logfiles (logrotate)
As usual please provide your feedback on this list and report any bugs to our bugtracker.
Best regards,
-Stefan
Hello testers,
after a lot of code debugging I was able to determine the reason of those memory leak.
It is the default behavior of not freeing used virtual memory again after a thread has been stopped.
Guardian stops and restarts each worker thread on a reload and a logrotate event.
I'll have to rework the corresponding code to solve this issue and come back after finished this.
Thanks for pointing this out,
-Stefan
Did anyone try to monitor the size of the log files that guardian is parsing as well? Could it be that every line that is read remains in memory?
This is just an idea...
Best, -Michael
On Sat, 2016-07-23 at 00:23 +0200, Matthias Fischer wrote:
Correction: in the meanwhile it jumped to 47890 KB, I don't know why. Logrotation?.
On 22.07.2016 22:28, Matthias Fischer wrote:
Hi,
...for the records...:
Since I switched "Loglevel" to OFF, memory usage stays at "14333 KB" and didn't change/rise since then.
HTH, Matthias
On 21.07.2016 23:07, Matthias Fischer wrote:
Hi,
Sounds interesting.
So I thought I take a little test...
Initial RAM-Usage: 14334 KB
First I just switched logging, did nothing else:
syslog => file => 22726 KB file => syslog => 31117 KB syslog => file => 39507/47898 KB (RAM suddenly altered. Why? No idea.) file => syslog => 56289 KB
Restarted through console:
root@ipfire: /var/log/guardian # guardianctrl restart Stopping Guardian... Starting Guardian... Unable to continue: /usr/sbin/guardian is running [ WARN ]
Hm?
Stopped through console, no output, 'guardian' not found anymore, neither in GUI nor through console:
root@ipfire: /var/log/guardian # ps ax | grep guardian 6962 pts/1 S+ 0:00 grep guardian
Started through console and we're exactly where we started (14334 KB).
The same happens if I switch the 'Priority-level' or the 'Firewall- Action'.
Initial: 2 2 => 3 => 22723 KB 3 => 2 => 31112 KB
Firewall-Action: Reject => Drop => 39501 KB
Stop => Start => 14334 KB
Interestingly, during MY (log-)switching, 'guardian' never stopped.
HTH, Matthias
On 21.07.2016 21:52, Flying Trashcan wrote:
I am now noticing that when I switch from Log facility “file” to “syslog”, Guardian Daemon stops and doesn’t restart. Switching from syslog to file didn’t stop the service, only switching back to syslog from file. I can manually start the service and be back to normal. Not a big deal, but if someone made the switch and didn’t think to manually start the service, it could be left without running Guardian.
> > > On Jul 21, 2016, at 4:25 AM, Matthias Fischer > <matthias.fis > cher@ipfire > .org> wrote: > > Hi, > > I mentioned this earlier, but it seems that 'guardian' > has > some kind > of > memory leak? > > It started about two days ago with ~14 MB RAM. Then it > jumped to ~34 > MB, > then to ~48 MB - today it suddenly uses 71 MB. > > And if I start it on my testmachine (offline!) it uses > ~90 > MB. > > Can someone confirm? > > Besides this, its working without seen problems. > > Best, > Matthias > > On 20.07.2016 15:33, Stefan Schantl wrote: > > > > > > Hello testers, > > > > I've uploaded a new test version (003). > > > > Update or fresh install works like described in the > > announcement > > mail. > > > > The Changelog can be found here: > > > > http://people.ipfire.org/~stevee/guardian-2.0/Changelog > > .t > > xt > > > > At the moment I'm missing feedback for the following > > functions: > > > > * Manually blocking / unblocking addresses. > > * Dealing with the ignore list. > > * Owncloud message parser. > > * Logrotate, there should be an corresponding log entry > > in the > > guardian > > logfile after rotation of the logfiles have been done. > > * Reload of the ignore list after "Red" has been > > reconnected. There > > also a corresponding log entry should be logged to the > > logfile and > > the > > new "Red-address" should also be logged as part of the > > ignore list > > (If > > you own an dynamic assigned one). > > > > As always please report your bugs or experience with > > the > > new version > > to > > this list. > > > > Best regards, > > > > -Stefan > > > > > > > > > > > Hello mailing list followers, > > > > > > this is the official release announcement for the > > > first > > > beta > > > release > > > of > > > the new Guardian 2.0 approach. > > > > > > > > > - What are the differences to the current version of > > > guardian > > > (legacy) > > > and the first approach of guardian 2.0? > > > > > > The most important difference is, that the new > > > version > > > of Guardian > > > 2.0 > > > completely has been re-written from scratch and > > > released under the > > > terms of the GPLv3. The legacy version of guardian is > > > not > > > maintained > > > anymore by it's developer and the software has been > > > released > > > without > > > any license details at all. > > > > > > Guardian 2.0 has a very modular code base and has > > > been > > > designed as > > > a > > > multi-threaded application. This allows a parallel > > > parsing of all > > > monitored logfiles and faster actions, if one of the > > > used modules > > > detects an attack. > > > > > > A very important difference to the legacy version is > > > the support > > > of > > > configuring and managing the entire service through > > > the > > > IPFire > > > webinterface. The entire configuration, managing of > > > current > > > blocked > > > hosts, unblocking them or editing the ignored hosts > > > list now can > > > be > > > done in a graphical way. > > > > > > The legacy version of guardian only supported parsing > > > snort > > > alerts. > > > HTTPD and SSH support has been patched by the IPFire > > > development > > > team > > > some time ago. Guardian 2.0 supports all of them out > > > of > > > the box > > > and > > > includes a filter to detect owncloud login brute- > > > force > > > attempts. > > > As a > > > benefit of the new modular design, additional filters > > > easily can > > > be > > > added. > > > > > > Guardian 2.0 is able to reload it's configuration, > > > reloading > > > the ignore list during runtime and handle, if the > > > logfiles will > > > get > > > rotated by logrotate. This actions can be called by > > > using the > > > webinterface or from the command line interface by > > > using > > > "guardianctrl". > > > > > > These are just a handful of the changes and benefits > > > which comes > > > with > > > Guardian 2.0, a complete list would be to long for > > > this > > > mailing > > > list. > > > > > > > > > - How to join testing? > > > > > > To get part of the testing team, simple navigate to > > > htt > > > p://people. > > > ipf > > > ir > > > e.org/~stevee/guardian-2.0/ and download the latest > > > tarball > > > (currently > > > 002). Please take care to download the correct one, > > > based on your > > > used > > > architecture. The i585 packages are for 32Bit > > > installations of > > > IPFire, > > > the x86_64 packages only can be used on 64Bit > > > installations. > > > > > > Put the downloaded file on your IPFire test system > > > and > > > extract the > > > package by using "tar -xvf guardian-2.0- > > > 002.<arch>.tar.gz -C /". > > > > > > The final installation step would be to regenerate > > > the > > > language > > > cache > > > by executing "update-lang-cache" on the console. > > > > > > From now you can find a new menu item called > > > "Guardian" > > > in your > > > "Service" menu after you have logged-in into your > > > IPFire's > > > webinterface. > > > > > > Documentation can be found on the IPFire wiki: > > > http://w > > > iki.ipfire. > > > org > > > /e > > > n/addons/guardian/start#the_guardian_20_addon > > > > > > > > > - Where to post bugs reports or provide feedback? > > > > > > If you find any bugs, please report them as usual on > > > the IPFire > > > bugtracker, which can be found at https://bugzilla.ip > > > fi > > > re.org. > > > > > > To provide feedback or to join a discussion, please > > > send your > > > mails > > > to > > > "development@lists.ipfire.org" (Please register first > > > at http://li > > > sts > > > .i > > > pfire.org if not yet done). > > > > > > The source code can be found at http://git.ipfire.org > > > /? > > > p=people/st > > > eve > > > e/ > > > guardian.git;a=summary > > > > > > > > > Happy testing, > > > > > > -Stefan > > >