Just cosmetics: Removed all trailing spaces - there were a few...
Activated 'monit' start delay: I activated this option to avoid running into a race condition while started through '/etc/init.d/monit start'.
As mentioned in 'monit' manual: "...if a service is slow to start, Monit can assume that the service is not running and possibly try to start it [again] and raise an alert, while, in fact the service is already about to start or already in its startup sequence."
This happened here during testing with (e.g.) Clamav.
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org --- config/monit/monitrc | 74 ++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/config/monit/monitrc b/config/monit/monitrc index 9fee14aad..3c999d041 100644 --- a/config/monit/monitrc +++ b/config/monit/monitrc @@ -5,8 +5,8 @@ ## Comments begin with a '#' and extend through the end of the line. Keywords ## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'. ## -## Below you will find examples of some frequently used statements. For -## information about the control file and a complete list of statements and +## Below you will find examples of some frequently used statements. For +## information about the control file and a complete list of statements and ## options, please have a look in the Monit manual. ## ## @@ -17,15 +17,15 @@ ## Start Monit in the background (run as a daemon): # set daemon 60 # check services at 1-minute intervals -# with start delay 240 # optional: delay the first check by 4-minutes (by + with start delay 240 # optional: delay the first check by 4-minutes (by # # default Monit check immediately after Monit start) # # ## Set syslog logging with the 'daemon' facility. If the FACILITY option is -## omitted, Monit will use 'user' facility by default. If you want to log to +## omitted, Monit will use 'user' facility by default. If you want to log to ## a standalone log file instead, specify the full path to the log file # -set logfile syslog facility log_daemon +set logfile syslog facility log_daemon # # ## Set the location of the Monit lock file which stores the process id of the @@ -34,7 +34,7 @@ set logfile syslog facility log_daemon set pidfile /var/run/monit.pid # ## Set the location of the Monit id file which stores the unique id for the -## Monit instance. The id is generated and stored on first Monit start. By +## Monit instance. The id is generated and stored on first Monit start. By ## default the file is placed in $HOME/.monit.id. # set idfile /var/lib/monit/id @@ -47,9 +47,9 @@ set idfile /var/lib/monit/id # set statefile /var/lib/monit/state # -## Set the list of mail servers for alert delivery. Multiple servers may be -## specified using a comma separator. If the first mail server fails, Monit -# will use the second mail server in the list and so on. By default Monit uses +## Set the list of mail servers for alert delivery. Multiple servers may be +## specified using a comma separator. If the first mail server fails, Monit +# will use the second mail server in the list and so on. By default Monit uses # port 25 - it is possible to override this with the PORT option. # # set mailserver mail.bar.baz, # primary mailserver @@ -57,10 +57,10 @@ set statefile /var/lib/monit/state # localhost # fallback relay # # -## By default Monit will drop alert events if no mail servers are available. -## If you want to keep the alerts for later delivery retry, you can use the -## EVENTQUEUE statement. The base directory where undelivered alerts will be -## stored is specified by the BASEDIR option. You can limit the queue size +## By default Monit will drop alert events if no mail servers are available. +## If you want to keep the alerts for later delivery retry, you can use the +## EVENTQUEUE statement. The base directory where undelivered alerts will be +## stored is specified by the BASEDIR option. You can limit the queue size ## by using the SLOTS option (if omitted, the queue is limited by space ## available in the back end filesystem). # @@ -69,11 +69,11 @@ set eventqueue slots 100 # optionally limit the queue size # # -## Send status and events to M/Monit (for more informations about M/Monit -## see http://mmonit.com/). By default Monit registers credentials with +## Send status and events to M/Monit (for more informations about M/Monit +## see http://mmonit.com/). By default Monit registers credentials with ## M/Monit so M/Monit can smoothly communicate back to Monit and you don't ## have to register Monit credentials manually in M/Monit. It is possible to -## disable credential registration using the commented out option below. +## disable credential registration using the commented out option below. ## Though, if safety is a concern we recommend instead using https when ## communicating with M/Monit and send credentials encrypted. # @@ -105,8 +105,8 @@ set eventqueue # set mail-format { from: monit@foo.bar }a # # -## You can set alert recipients whom will receive alerts if/when a -## service defined in this file has errors. Alerts may be restricted on +## You can set alert recipients whom will receive alerts if/when a +## service defined in this file has errors. Alerts may be restricted on ## events by using a filter as in the second example below. # # set alert sysadm@foo.bar # receive all alerts @@ -115,9 +115,9 @@ set eventqueue # set alert your-name@your.domain not on { instance, action } # # -## Monit has an embedded web server which can be used to view status of +## Monit has an embedded web server which can be used to view status of ## services monitored and manage services from a web interface. See the -## Monit Wiki if you want to enable SSL for the web server. +## Monit Wiki if you want to enable SSL for the web server. # set httpd port 2812 and use address localhost # only accept connection from localhost @@ -143,15 +143,15 @@ set httpd port 2812 and # if cpu usage (system) > 30% then alert # if cpu usage (wait) > 20% then alert # -# +# ## Check if a file exists, checksum, permissions, uid and gid. In addition -## to alert recipients in the global section, customized alert can be sent to -## additional recipients by specifying a local alert handler. The service may +## to alert recipients in the global section, customized alert can be sent to +## additional recipients by specifying a local alert handler. The service may ## be grouped using the GROUP option. More than one group can be specified by ## repeating the 'group name' statement. -# +# # check file apache_bin with path /usr/local/apache/bin/httpd -# if failed checksum and +# if failed checksum and # expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor # if failed permission 755 then unmonitor # if failed uid root then unmonitor @@ -161,15 +161,15 @@ set httpd port 2812 and # } with the mail-format { subject: Alarm! } # group server # -# +# ## Check that a process is running, in this case Apache, and that it respond ## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory, -## and number of children. If the process is not running, Monit will restart -## it by default. In case the service is restarted very often and the +## and number of children. If the process is not running, Monit will restart +## it by default. In case the service is restarted very often and the ## problem remains, it is possible to disable monitoring using the TIMEOUT ## statement. This service depends on another service (apache_bin) which ## is defined above. -# +# # check process apache with pidfile /usr/local/apache/logs/httpd.pid # start program = "/etc/init.d/httpd start" with timeout 60 seconds # stop program = "/etc/init.d/httpd stop" @@ -178,7 +178,7 @@ set httpd port 2812 and # if totalmem > 200.0 MB for 5 cycles then restart # if children > 250 then restart # if loadavg(5min) greater than 10 for 8 cycles then stop -# if failed host www.tildeslash.com port 80 protocol http +# if failed host www.tildeslash.com port 80 protocol http # and request "/somefile.html" # then restart # if failed port 443 type tcpssl protocol http @@ -187,8 +187,8 @@ set httpd port 2812 and # if 3 restarts within 5 cycles then timeout # depends on apache_bin # group server -# -# +# +# ## Check filesystem permissions, uid, gid, space and inode usage. Other services, ## such as databases, may depend on this resource and an automatically graceful ## stop may be cascaded to them before the filesystem will become full and data @@ -207,7 +207,7 @@ set httpd port 2812 and # group server # # -## Check a file's timestamp. In this example, we test if a file is older +## Check a file's timestamp. In this example, we test if a file is older ## than 15 minutes and assume something is wrong if its not updated. Also, ## if the file size exceed a given limit, execute a script # @@ -219,8 +219,8 @@ set httpd port 2812 and # if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba # # -## Check directory permission, uid and gid. An event is triggered if the -## directory does not belong to the user with uid 0 and gid 0. In addition, +## Check directory permission, uid and gid. An event is triggered if the +## directory does not belong to the user with uid 0 and gid 0. In addition, ## the permissions have to match the octal description of 755 (see chmod(1)). # # check directory bin with path /bin @@ -229,8 +229,8 @@ set httpd port 2812 and # if failed gid 0 then unmonitor # # -## Check a remote host availability by issuing a ping test and check the -## content of a response from a web server. Up to three pings are sent and +## Check a remote host availability by issuing a ping test and check the +## content of a response from a web server. Up to three pings are sent and ## connection to a port and an application level network check is performed. # # check host myserver with address 192.168.1.1