- Update cups-filters from 1.27.4 to 1.28.7 - Changelog CHANGES IN V1.28.7 - driverless: Removed the support quality check from Pull request #235 as it takes significant time for each printer being listed, making cups-driverd (`lpinfo -m`) timing out when there are many printers (OpenPrinting CUPS issue #65). - libcupsfilters: In the PPD generator give priority to Apple Raster against PDF (Issue #331). - libcupsfilters: Added NULL check when removing ".Borderless" suffixes from page size names (Issue #314, Pull request #328). - libcupsfilters: In the cupsRasterParseIPPOptions() map the color spaces the same way as in the PPD generator (Issue #326, Pull request #327). - libcupsfilters: Fixed addition of grayscale mode in generated PPD files, to avoid duplicate entries (OpenPrinting CUPS issue #59). CHANGES IN V1.28.6 - libcupsfilters: In generated PPDs add a grayscale mode if there are only color printing modes (from OpenPrinting CUPS). - libcupsfilters: In generated PPDs add an "OutputBin" option also if it has only one choice (OpenPrinting CUPS pull request #18). - libcupsfilters: Generated PPDs could have an "Unknown" default InputSlot (OpenPrinting CUPS issue #44). - cups-browsed: Removed unneeded IPP attribute additions preventing the created local queues from preserving a location or description the user assigns to them (Issue #323). - cups-browsed: Removed all calls of the resolve_uri() function of libcupsfilters, as these are not actually needed and in case the supplied DNS-SD-based URI is not resolvable, the function gets stuck for ~5 seconds. - cups-browsed: Fixed several memory leaks, mainly from the code to merge printer IPP attributes for clusters (Pull request #322). - cups-browsed: Silenced compiler warning. - foomatic-rip: Fix infinite loop and input from file on raw printing (Pull request #318). - foomatic-rip: Remove temporary file created during pdf-to-ps conversion (Pull request #313). CHANGES IN V1.28.5 - cups-browsed: UUID from IPP response was used after its pointer was freed by ippDelete() (Pull request #311). CHANGES IN V1.28.4 - driverless: Avoid duplicate PPD list entries from the same device via UUID - driverless: Reduce ippfind calls by "driverless" and "driverless-fax"called by CUPS. Let "driverless list" list both print and fax PPDs and "driverless-fax list" do nothing. - driverless: Avoid duplicate listings in printer discovery, by "driverless-fax" not listing any URI as "driverless" lists them all already. - driverless: Vastly improve performance by doing only one ippfind call instead of two (IPP, IPPS) as ippfind accepts more than one reg type on the command line. - Sample PPDs: Corrected manufacturer name in Fuji_Xerox-DocuPrint_CM305_df-PDF.ppd. CHANGES IN V1.28.3 - libcupsfilters, cups-browsed: Fixed inconsistency between resolvers for DNS-SD-based URIs, resolve_uri() and ippfind_based_uri_converter(). Now both return a freeable string. - libcupsfilters: Fix uninitialized buffer and parsing ippfind output in ippfind_based_uri_converter() function (Issue #308, Pull request #309). CHANGES IN V1.28.2 - driverless: Free allocated memory, use MAX_OUTPUT_LEN (Pull request #304). - driverless: Make the two ippfind tasks(for IPP and IPPS) run in parallel (Pull request #302, #305, #306). - braille: Support new liblouis tables not containing a display name (Pull request #303) - Build system: Let ./configure not error out when there is more than one DejaVuSans.ttf test font candidate (Issue #300). - cups-browsed: Crash when a remote printer set as default gets removed, due to missing variable in printf() call (Issue #299). - libcupsfilters: Removed all signal handling and global variables from get_printer_attributes() and ippfind_based_uri_converter(). This is overkill for these quick operations and causes problems when shutting down cups-browsed (Issue #298). CHANGES IN V1.28.1 - COPYING: Fixed several typos - libcupsfilters: Fixed typo in log message of get_printer_attributes functions. - cups-browsed: Fixed typos in configuration file and man page - libcupsfilters: Let the PPD generator not suffix page size names with ".Borderless" if all page sizes would get this suffix, for example for printers which generally print borderless. - libcupsfilters: Added "faxPrefix" option for generated IPP Fax Out PPDs, so that this option also appears in print dialogs. - driverless: List addresses for local services correctly when using "--std-ipp-uris" (with "localhost" hostname). - driverless: Make calls of the ippfind utility somewhat faster, setting the timeout of ippfind to automatic. - libcupsfilters: Resolve DNS-SD-based URIs for local services correctly (using hostname "localhost"). - libcupsfilters: In get_printer_attributes() functions do not try to convert URIs which are not DNS-SD-based (Issue #294). - libcupsfilters: In get_printer_attributes() functions also support URIs with "dnssd://..." scheme. - libcupsfilters: Moved signal handling back into main function of the get_printer_attributes() variants, it got moved out accidentally. - driverless: For generating a PPD, independent whether via "driverless URI" or "driverless cat URI", always allow CUPS driver URIs (prefixed with "driverless: " or "driverless-fax:") and pure IPP URIs. - driverless: Accept clean IPP URIs also for 'driverless cat ...' (Issue #295, Pull request #296). - driverless-fax: Do not use fixed path for call of driverless itself (Pull request #293). CHANGES IN V1.28.0 - driverless, driverless-fax, libcupsfilters: Added IPP Fax Out support. Now printer setup tools list an additional fax "driver". A fax queue is created by selecting this driver. Jobs have to be sent with "-o phone=12345" to supply the destination phone number (Pull request #280). - libfontembed: Silenced warning with gcc 10.x (Pull request #287). - cups-browsed: Added ./configure options --enable-saving-created-queues and --with-remote-cups-local-queue-naming (Pull request: #253, #285). - cups-browsed: Fixed several memory leaks, mainly from the code to merge printer IPP attributes for clusters (Pull request #281, #283). - driverless: Added "--std-ipp-uris" command line option to show listed URIs in standard hostname-based form (not the CUPS DNS-SD-service-name-based form. Only for manual call of the utility, for debugging purposes (Pull request #277). - libfontembed: Removed assert() calls which cause crashes when unsupported emoji fonts are installed (Issue #254, Pull request #276). - driverless: Added support for IPPS (use "ipps://..." URIs if possible, Issue #251, Pull request #270, #273). - gstoraster, gstopdf: When converting PostScript to PDF use the "pdfwrite" output device with "-dPDFSETTINGS=/default" instead of with "-dPDFSETTINGS=/printer". This reproduces bitmaps in the PostScript file with their original image quality (Issue #272). - cups-browsed: Limit log file size and add backup file for previous log entries. Introduced the configuration option DebugLogFileSize in cups-browsed.conf to set the actual limit in kilobytes or 0 to get the old behavior of an unlimited size for the log file (Issue #260, Pull request #267). - gstoraster, gstopdf: Do not apply margins when output format is PDF, as then we convert an incoming PostScript file to PDF (pre-pdftopdf) and do not prepare the pages for the printer (post-pdftopdf, Issue #250). - cups-browsed: Do not write any log messages directly to stderr, there were some concerning timeouts on queue creation (Issue #260). - Build system: Fix cross-compilation without DejaVu test font in configure.ac (Issue #262, Pull request #263). - libcupsfilters: Respect the fact that PPD keywords are case-sensitive when adding "*cupsManualCopies: True" in PPD file (Issue #242). - libcupsfilters: Older versions of libcups (< 2.3.1) had the enum name for fold-accordion finishings mistyped. Added a workaround. - cups-browsed: Remove left-over local queues from the previous session more quickly when CUPS legacy browsing is turned on. - cups-browsed: Left-over local queues from the previous session for which the corresponding remote printer did not appear again did not get removed as they were considered externally overwritten. - gstoraster, gstopdf: Add option "-dDoNumCopies" to Ghostscript command line if we are outputting PDF (called via gstopdf wrapper) and the number of copies supplied to CUPS is 1 (4th command line argument). In this case we convert incoming PostScript to PDF and need to respect embedded PostScript commands to implement the number of copies (Issue #255, CUPS Issue #5796, OpenSUSE bug #1173345). - imagetoraster: Potential null dereference fix (when no valid PPD is supplied, Pull request #256). - cups-browsed: Call cupsGetNamedDest() only if "OnlyUnsupportedByCUPS No" - Sample PPDs: Corrected ColorModel default for Generic PWG Raster PPD to Color (Pull request #247). - cups-browsed: Mark the temp queue as cups-browsed-generated during setting printer-is-shared (Pull request #246). - cups-browsed: Remove mentions of README and AUTHORS files in the man page (Pull request #244). - pclmtoraster: Added new filter to extract Raster data from raster-only PDF files, here for the special case of PCLm files (Pull request #243, #257). - Sample PPDs: In Generic-PDF_Printer-PDF.ppd add option to switch between color and grayscale printing (Pull request #237). CHANGES IN V1.27.5 - cups-browsed: Do not remove the created local queues on shutdown, to avoid their re-creation on restart, so that desktops get no cluttered with notifications of new queues being created. One can return to the old behavior via "KeepGeneratedQueuesOnShutdown No" in cups-browsed.conf (Ubuntu bug #1869981, #1878241). - cups-browsed: Do not accept DNS-SD broadcasts of IPPS type of "remote" CUPS queues of another CUPS instance on the local machine. This way we get a local queue pointing to such a printer only in unencrypted version (IPP). For some reason printing from one CUPS server to another on the same machine works only unencrypted. - foomatic-rip: Map two-sided-short-edge to DuplexTumble (Pull request #236) - Build system: In configure.ac use AS_IF instead of AC_CHECK_FILE for font check (Issue #239, Pull request #240) - cups-browsed: Cleaned up code for determining to which CUPS server (host/port/domain socket) to connect, so that connection via DomainSocket cups-browsed.conf directive, CUPS_SERVER and IPP_PORT environment variables and all defaults and methods of libcups, including CUPS' client.conf work. - gstoraster, rastertopdf: Do not pass NULL to fprintf() (Pull request #230). - libcupsfilters: Silence compiler warning (Pull request #229). - rootfile updated
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/packages/cups-filters | 3 +++ lfs/cups-filters | 6 +++--- 2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/config/rootfiles/packages/cups-filters b/config/rootfiles/packages/cups-filters index 0c31d52f0..285eb9d3a 100644 --- a/config/rootfiles/packages/cups-filters +++ b/config/rootfiles/packages/cups-filters @@ -7,6 +7,7 @@ etc/rc.d/init.d/cups-browsed #etc/rc5.d/K35cups-browsed #etc/rc5.d/S82cups-browsed usr/bin/driverless +usr/bin/driverless-fax usr/bin/foomatic-rip usr/bin/ttfread #usr/include/cupsfilters @@ -27,10 +28,12 @@ usr/bin/ttfread usr/lib/cups/backend/beh usr/lib/cups/backend/cups-brf usr/lib/cups/backend/driverless +usr/lib/cups/backend/driverless-fax usr/lib/cups/backend/implicitclass usr/lib/cups/backend/parallel usr/lib/cups/backend/serial usr/lib/cups/driver/driverless +usr/lib/cups/driver/driverless-fax usr/lib/cups/filter/bannertopdf usr/lib/cups/filter/brftoembosser usr/lib/cups/filter/brftopagedbrf diff --git a/lfs/cups-filters b/lfs/cups-filters index 4f4d88b95..e7640f307 100644 --- a/lfs/cups-filters +++ b/lfs/cups-filters @@ -24,7 +24,7 @@
include Config
-VER = 1.27.4 +VER = 1.28.7
THISAPP = cups-filters-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = cups-filters -PAK_VER = 3 +PAK_VER = 4
DEPS = cups ghostscript
@@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = fd43c2fa2f542d45580d113d30bdd2da +$(DL_FILE)_MD5 = 2efeed97e11ea5e157c5f4f2e0780fe7
install : $(TARGET)