This one was definitely in need of an update as well...
Reviewed-by: Peter Müller peter.mueller@ipfire.org
- Update from 2.1.1 (2016) to 2.3.0 (2021)
- Update of rootfile
- A build dependency has been added for twine. As this is to support the upload of packages to PyPI it will not be used for IPFire. The changelog just notes the addition of twine as a build dependency without any explanation. See entry in version 2.2.4 No other change was made when this dependency was added to setup.py Adding twine added 9 further dependencies some of which caused further dependencies and so on. 19 additional new packages were reached and the system was still coming up with more. Created a patch to remove the twine build dependency from setup.py Subsequently found other people had done the same thing as there was no response to requests from other people to not have it as a build dependency for situations where packages were not going to be uploaded to PyPI.
- Changelog
Version 2.3.0 :Released: 2021-02-21 :Maintainer: Ben Finney ben+python@benfinney.id.au Removed:
- Remove support for Python versions older than Python 3. Python 2 has been unsupported by the Python project since 2020.
- Remove dependency on back-ported `unittest2` and `mock`. Depend instead on standard library `unittest` and `unittest.mock`. Thanks to Michał Górny for the merge requests.
Version 2.2.4 :Released: 2019-10-27 :Maintainer: Ben Finney ben+python@benfinney.id.au Bugs Fixed:
- Run the Setuptools `egg-info` command as part of the `build` command. Closes: Pagure #31. Thanks to Stanislav Levin for the bug report and diagnosis.
- Create the socket and catch “non-socket” errors. Closes: Pagure #34. Thanks to Miro Hrončok for the bug report and patch.
- Only deal with a range of file descriptors if the range is not empty. Closes: Pagure #39. Thanks to Alex Pyrgiotis for the test scenario.
- Declare Twine as a build dependency.
- Reformat the change log entries with keepachangelog.com sub-sections.
Changed:
- Upgrade Tox dependency to version “3.7.0”. Thanks to Miro Hrončok for the contribution.
- Significant speed-up to discovery of file descriptors to close. By using a native `tuple` for the heavily-used file descriptor range representation, this gives approximately 5× faster calls to `close_all_open_files` in the typical case. This partially addresses Pagure #40. Thanks to Alex Pyrgiotis for testing various alternative proposals.
- Refactor the build system to use Makefile modules for each topic.
Version 2.2.3 :Released: 2019-01-21 :Maintainer: Ben Finney ben+python@benfinney.id.au Bugs Fixed:
- Use custom fake file type for testing `fileno` behaviour. This works around an incompatibility in Python 2.7 `file` type that caused test cases to fail.
Deprecated:
- Promote the warning for `runner` module to a `DeprecationWarning`. This has been an unofficial example module from the beginning, and it will be removed in a future version.
Version 2.2.2 :Released: 2019-01-19 :Maintainer: Ben Finney ben+python@benfinney.id.au Bugs Fixed:
- Remove from the build system specification a white space character not permitted in TOML format.
Added:
- Implement test suite automation in virtualenvs, using Tox.
Version 2.2.1 :Released: 2019-01-18 :Maintainer: Ben Finney ben+python@benfinney.id.au Added:
- Add a :PEP:`518` conformant build system specification (the ``pyproject.toml`` file).
Version 2.2.0 :Released: 2018-08-15 :Maintainer: Ben Finney ben+python@benfinney.id.au Bugs Fixed:
- Correct the description of the return value for `daemon.is_detach_process_context_required`. Closes: Pagure #6.
- Set a sensible default for `Distribution.script_name`. This works around a bug in Setuptools which calls commands before the `Distribution` is initialised. Closes: Pagure #2.
Changed:
- The test suite now relies on the test discovery feature in ‘unittest’. This feature is in Python version 2.7 and later.
- Improve performance of `daemon.close_all_open_files`. Thanks to Darek Działak for the implementation. Closes: Pagure #10.
Version 2.1.2 :Released: 2016-10-26 :Maintainer: Ben Finney ben+python@benfinney.id.au Added:
- Add a README document for the code base.
Changed:
- Migrate code project hosting to Pagure. Record the change of homepage URL in PyPI metadata.
Deprecated:
- Raise a warning that the ‘runner’ module is pending deprecation. This has been an unofficial example module from the beginning, and it will be removed in a future version.
Bugs Fixed:
- Ensure custom types are part of the Python type hierarchy.
- Avoid a circular dependency for the version string at install time. Thanks to Maarten van Gompel for the reproducible test case.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org
config/rootfiles/common/python3-daemon | 27 +++++++++---------- lfs/python3-daemon | 5 ++-- ...move-twine-requirement-from-setup.py.patch | 10 +++++++ 3 files changed, 26 insertions(+), 16 deletions(-) create mode 100644 src/patches/python3-daemon-2.3.0-remove-twine-requirement-from-setup.py.patch
diff --git a/config/rootfiles/common/python3-daemon b/config/rootfiles/common/python3-daemon index 653dee7d4..24ec26c0b 100644 --- a/config/rootfiles/common/python3-daemon +++ b/config/rootfiles/common/python3-daemon @@ -1,14 +1,13 @@ -#usr/lib/python3.8/site-packages/daemon -usr/lib/python3.8/site-packages/daemon/__init__.py -usr/lib/python3.8/site-packages/daemon/_metadata.py -usr/lib/python3.8/site-packages/daemon/daemon.py -usr/lib/python3.8/site-packages/daemon/pidfile.py -usr/lib/python3.8/site-packages/daemon/runner.py -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/PKG-INFO -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/SOURCES.txt -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/dependency_links.txt -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/not-zip-safe -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/requires.txt -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/top_level.txt -#usr/lib/python3.8/site-packages/python_daemon-2.1.1-py3.8.egg-info/version_info.json +#usr/lib/python3.10/site-packages/daemon +usr/lib/python3.10/site-packages/daemon/__init__.py +usr/lib/python3.10/site-packages/daemon/_metadata.py +usr/lib/python3.10/site-packages/daemon/daemon.py +usr/lib/python3.10/site-packages/daemon/pidfile.py +usr/lib/python3.10/site-packages/daemon/runner.py +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/PKG-INFO +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/SOURCES.txt +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/dependency_links.txt +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/not-zip-safe +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/requires.txt +#usr/lib/python3.10/site-packages/python_daemon-2.3.0-py3.10.egg-info/top_level.txt diff --git a/lfs/python3-daemon b/lfs/python3-daemon index 8f0876ff7..d17b8ac95 100644 --- a/lfs/python3-daemon +++ b/lfs/python3-daemon @@ -24,7 +24,7 @@
include Config
-VER = 2.1.1 +VER = 2.3.0
THISAPP = python-daemon-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 72e2acf2c3d69c7fa75a6625d06adfd0 +$(DL_FILE)_MD5 = 71a7d14d4d698d847dcf53656d9b8b71
install : $(TARGET)
@@ -70,6 +70,7 @@ $(subst %,%_MD5,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/python3-daemon-2.3.0-remove-twine-requirement-from-setup.py.patch cd $(DIR_APP) && python3 setup.py install --root=/ @rm -rf $(DIR_APP) @$(POSTBUILD)
diff --git a/src/patches/python3-daemon-2.3.0-remove-twine-requirement-from-setup.py.patch b/src/patches/python3-daemon-2.3.0-remove-twine-requirement-from-setup.py.patch new file mode 100644 index 000000000..bbe5196f0 --- /dev/null +++ b/src/patches/python3-daemon-2.3.0-remove-twine-requirement-from-setup.py.patch @@ -0,0 +1,10 @@ +--- python-daemon-2.3.0/setup.py_orig 2021-02-21 06:45:31.000000000 +0100 ++++ python-daemon-2.3.0/setup.py 2022-01-07 14:38:01.612173070 +0100 +@@ -66,7 +66,6 @@
zip_safe=False,setup_requires=["docutils",+- "twine",
],test_suite="setup.test_suite",tests_require=test_requirements,