Hello Michael,
I think Stefan has answered most of your questions with his patches. I think the two major points outstanding are:
- I agree that it would be better not to hard code the rulesets in the choice of which modifysid directives to use, but I think that will require a significant modification of the code in order to store the choice in the sources file, which I wasn't prepared to do without looking at the code in much more detail.
I expressed the choice the way that I did (checking for the three Talos VRT rulesets, rather than the two Emerging Threat ones), because it means that any future additions to the list of rulessets will get the modifications based on the presence or absence of the attribute 'flowbits:noalert'. At this worst this will leave the rules set to 'drop' and enabled as delivered. The directives used on the Talos VRT rulesets would leave all the rules disabled if they didn't include the metadata that its looking for.
So, I believe that the code as written is safe for any reasonable ruleset.
- The reason for providing a script to update the oinkmaster-modify-sids.conf and then convert the existing rules tarball rather than just triggering a new download is that the Talos VRT registered/subscribed rules tarball is over 700MB and I considered that could take too long to download as part of an update when the internet link is slow.
Tim
On 05/06/2019 19:56, Stefan Schantl wrote:
From: Tim FitzGeorge ipfr@tfitzgeorge.me.uk
In IPS mode rule actions need to be have the action 'drop' for the protection to work, however this is not appropriate for all rules. Modify the generator for oinkmaster-modify-sids.conf to leave rules with the action 'alert' here this is appropriate. Also add a script to be run on update to correct existing downloaded rules.
Fixes #12086
Signed-off-by: Tim FitzGeorge ipfr@tfitzgeorge.me.uk Tested-by: Peter Müller peter.mueller@ipfire.org Signed-off-by: Stefan Schantl stefan.schantl@ipfire.org
config/cfgroot/ids-functions.pl | 44 +++++++++-- config/rootfiles/common/configroot | 1 + config/rootfiles/core/133/update.sh | 3 + config/suricata/convert-ids-modifysids-file | 84 +++++++++++++++++++++ html/cgi-bin/ids.cgi | 22 +++++- lfs/configroot | 1 + 6 files changed, 148 insertions(+), 7 deletions(-) create mode 100644 config/suricata/convert-ids-modifysids-file
diff --git a/config/cfgroot/ids-functions.pl b/config/cfgroot/ids-functions.pl index 88734a3ca..e1caa6e58 100644 --- a/config/cfgroot/ids-functions.pl +++ b/config/cfgroot/ids-functions.pl @@ -243,7 +243,7 @@ sub downloadruleset { # Load perl module to deal with temporary files. use File::Temp;
- # Generate temporay file name, located in "/var/tmp" and with a suffix of ".tar.gz".
- # Generate temporary file name, located in "/var/tmp" and with a suffix of ".tar.gz". my $tmp = File::Temp->new( SUFFIX => ".tar.gz", DIR => "/var/tmp/", UNLINK => 0 ); my $tmpfile = $tmp->filename();
@@ -293,6 +293,9 @@ sub downloadruleset { # Overwrite existing rules tarball with the new downloaded one. move("$tmpfile", "$rulestarball");
- # Set correct ownership for the rulesdir and files.
- set_ownership("$rulestarball");
- # If we got here, everything worked fine. Return nothing. return;
} @@ -726,8 +729,8 @@ sub write_used_rulefiles_file(@) { # ## Function to generate and write the file for modify the ruleset. # -sub write_modify_sids_file($) {
- my ($ruleaction) = @_;
+sub write_modify_sids_file($$) {
my ($ruleaction,$rulefile) = @_;
# Open modify sid's file for writing. open(FILE, ">$modify_sids_file") or die "Could not write to $modify_sids_file. $!\n";
@@ -737,8 +740,39 @@ sub write_modify_sids_file($) {
# Check if the traffic only should be monitored. unless($ruleaction eq "alert") {
# Tell oinkmaster to switch all rules from alert to drop.print FILE "modifysid \* \"alert\" \| \"drop\"\n";
# Suricata is in IPS mode, which means that the rule actions have to be changed# from 'alert' to 'drop', however not all rules should be changed. Some rules# exist purely to set a flowbit which is used to convey other information, such# as a specific type of file being downloaded, to other rulewhich then check for# malware in that file. Rules which fall into the first category should stay as# alert since not all flows of that type contain malware.if($rulefile eq 'registered' or $rulefile eq 'subscripted' or $rulefile eq 'community') {# These types of rulesfiles contain meta-data which gives the action that should# be used when in IPS mode. Do the following:## 1. Disable all rules and set the action to 'drop'# 2. Set the action back to 'alert' if the rule contains 'flowbits:noalert;'# This should give rules not in the policy a reasonable default if the user# manually enables them.# 3. Enable rules and set actions according to the meta-data strings.my $policy = 'balanced'; # Placeholder to allow policy to be changed.print FILE <<END;+modifysid * "^#?(?:alert|drop)" | "#drop" +modifysid * "^#drop(.+flowbits:noalert;)" | "#alert${1}" +modifysid * "^#(?:alert|drop)(.+policy $policy-ips alert)" | "alert${1}" +modifysid * "^#(?:alert|drop)(.+policy $policy-ips drop)" | "drop${1}" +END
} else {# These rulefiles don't have the metadata, so set rules to 'drop' unless they# contain the string 'flowbits:noalert;'.print FILE <<END;+modifysid * "^(#?)(?:alert|drop)" | "${1}drop" +modifysid * "^(#?)drop(.+flowbits:noalert;)" | "${1}alert${2}" +END
}}
# Close file handle.
diff --git a/config/rootfiles/common/configroot b/config/rootfiles/common/configroot index a7f27fe55..56b0257bc 100644 --- a/config/rootfiles/common/configroot +++ b/config/rootfiles/common/configroot @@ -3,6 +3,7 @@ usr/sbin/convert-outgoingfw usr/sbin/convert-portfw usr/sbin/convert-snort usr/sbin/convert-xtaccess +usr/sbin/convert-ids-modifysids-file usr/sbin/firewall-policy #var/ipfire var/ipfire/addon-lang diff --git a/config/rootfiles/core/133/update.sh b/config/rootfiles/core/133/update.sh index 9d708f092..a05ad0741 100644 --- a/config/rootfiles/core/133/update.sh +++ b/config/rootfiles/core/133/update.sh @@ -62,6 +62,9 @@ telinit u # Regenerate /etc/ipsec.conf sudo -u nobody /srv/web/ipfire/cgi-bin/vpnmain.cgi
+# Modify suricata modify-sids file +/usr/sbin/convert-ids-modifysids-file
# Start services /usr/local/bin/ipsecctrl S /etc/init.d/suricata restart diff --git a/config/suricata/convert-ids-modifysids-file b/config/suricata/convert-ids-modifysids-file new file mode 100644 index 000000000..8b70aa0fc --- /dev/null +++ b/config/suricata/convert-ids-modifysids-file @@ -0,0 +1,84 @@ +#!/usr/bin/perl +############################################################################### +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2019 IPFire Development Team info@ipfire.org # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see http://www.gnu.org/licenses/. # +# # +###############################################################################
+use strict;
+require '/var/ipfire/general-functions.pl'; +require "${General::swroot}/ids-functions.pl";
+# Hash which contains the IDS (suricata) settings. +my %idssettings;
+# Hash which contains the RULES settings. +my %rulessettings;
+# +## Step 1: Read IDS and rules settings. +#
+exit unless(-f $IDS::ids_settings_file and -f $IDS::rules_settings_file);
+# Read IDS settings. +&General::readhash("$IDS::ids_settings_file", %idssettings);
+# Read rules settings. +&General::readhash("$IDS::rules_settings_file", %rulessettings);
+# +## Step 2: Generate and write the file to modify the ruleset. +#
+my $IDS_action = "drop";
+# Check if the traffic only should be monitored. +if ($idssettings{"MONITOR_TRAFFIC_ONLY"} eq "on") {
- # Switch IDS action to alert only.
- $IDS_action = "alert";
+}
+# Call subfunction and pass the desired IDS action. +&IDS::write_modify_sids_file($IDS_action, $rulessettings{RULES});
+# Set correct ownership. +&IDS::set_ownership("$IDS::modify_sids_file");
+# +## Step 3: Call oinkmaster to extract and setup the rules structures. +#
+# Check if a rulestarball is present. +if (-f $IDS::rulestarball) {
- # Launch oinkmaster by calling the subfunction.
- &IDS::oinkmaster();
- # Set correct ownership for the rulesdir and files.
- &IDS::set_ownership("$IDS::rulespath");
+}
+# +## Step 4: Start the IDS if enabled. +#
+# Check if the IDS should be started. +if($idssettings{"ENABLE_IDS"} eq "on") {
- # Call suricatactrl and reload the rules.
- &IDS::call_suricatactrl("reload");
+} diff --git a/html/cgi-bin/ids.cgi b/html/cgi-bin/ids.cgi index 00db6a0c3..1791e9beb 100644 --- a/html/cgi-bin/ids.cgi +++ b/html/cgi-bin/ids.cgi @@ -359,7 +359,7 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'save'}) { $errormessage = "$Lang::tr{'could not download latest updates'} - $Lang::tr{'system is offline'}"; }
# Check if enought free disk space is availabe.
# Check if enough free disk space is availabe. if(&IDS::checkdiskspace()) { $errormessage = "$Lang::tr{'not enough disk space'}"; }@@ -370,6 +370,22 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'save'}) { # a new ruleset. &working_notice("$Lang::tr{'ids working'}");
&General::readhash("$IDS::ids_settings_file", \%idssettings);# Temporary variable to set the ruleaction.# Default is "drop" to use suricata as IPS.my $ruleaction="drop";# Check if the traffic only should be monitored.if($idssettings{'MONITOR_TRAFFIC_ONLY'} eq 'on') {# Switch the ruleaction to "alert".# Suricata acts as an IDS only.$ruleaction="alert";}# Write the modify sid's file and pass the taken ruleaction.&IDS::write_modify_sids_file($ruleaction, $cgiparams{'RULES'});# Call subfunction to download the ruleset. if(&IDS::downloadruleset()) { $errormessage = $Lang::tr{'could not download latest updates'};@@ -609,8 +625,10 @@ if ($cgiparams{'RULESET'} eq $Lang::tr{'save'}) { $ruleaction="alert"; }
- &General::readhash("$IDS::rules_settings_file", %rulessettings);
- # Write the modify sid's file and pass the taken ruleaction.
- &IDS::write_modify_sids_file($ruleaction);
&IDS::write_modify_sids_file($ruleaction, $rulessettings{'RULES'});
# Check if "MONITOR_TRAFFIC_ONLY" has been changed. if($cgiparams{'MONITOR_TRAFFIC_ONLY'} ne $oldidssettings{'MONITOR_TRAFFIC_ONLY'}) {
diff --git a/lfs/configroot b/lfs/configroot index d4eb545f0..227d09239 100644 --- a/lfs/configroot +++ b/lfs/configroot @@ -135,6 +135,7 @@ $(TARGET) :
# Install snort to suricata converter. cp $(DIR_SRC)/config/suricata/convert-snort /usr/sbin/convert-snort
cp $(DIR_SRC)/config/suricata/convert-ids-modifysids-file /usr/sbin/convert-ids-modifysids-file
# Add conntrack helper default settings for proto in FTP H323 IRC SIP TFTP; do \