Hello,
On 6 Aug 2022, at 13:37, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 06/08/2022 14:11, Michael Tremer wrote:
Hello Adolf, As far as I see, the problem is that armv6l names the binary modules slightly different. Instead of pyfuse3.cpython-310-MACHINE-linux-gnu.so it is pyfuse3.cpython-310-MACHINE-linux-gnueabi.so (note the gnueabi). For some packages we have extra rootfiles for armv6l to accommodate for that: https://git.ipfire.org/?p=ipfire-2.x.git;a=blob;f=config/rootfiles/packages/... So just copying the root file and adding that “eabi” bit should do it.
OK, clear. I also note that the build system is also smart enough that all the rest can stay with xxxMACHINExxx in the main rootfile directory, so that is good.
No, the entire MACHINE things is a very ugly hack.
I would have volunteered to tidy this up a little, but considering we are going to drop support for armv6l soon, this is probably not time invested well.
I will redo the patch for that but I aim to try out the arm build anyway to test out the qemu-user-static approach for fun. In Arch Linux I am having to build the qemu-user-static and it required glib2-static and pcre-static to be built as well.
Nice test exercise for that.
Yes :)
Thanks very much, Adolf.
-Michael
On 6 Aug 2022, at 11:47, Adolf Belka adolf.belka@ipfire.org wrote:
Hi All,
On 05/08/2022 19:44, Adolf Belka wrote:
Hi Michael,
On 05/08/2022 18:04, Michael Tremer wrote:
Ah, a classic :)
Can I ask you to send a patch for the root file?
Sure but how do I deal with it.
The original created rootfile had x86_64 in the file name so I replaced it with xxxMACHINExxx.
So do I have to leave the rootfile with x86_64 in the filename, which will cause the build to complain or is there some command to put in the lfs that says it is only for certain architectures and does that then have to apply to all of the 11 dependencies as well or only pyfuse3 or only borgbackup or what?
Borgbackup itself has download files for Linux, BSD and MacOS. However they also have a link for a person who has built binaries for various arm architectures. So it looks like it should work for arm.
I have also noticed that the aarch64 build completed successfully with the same pyfuse3 rootfile. So I suspect the issue is that for the armv6l architecture pyfuse3 does not call it armv6l. I have seen this in some other packages and the rootfiles have had to be made specific for each architecture and stored in the aarch64, armv6l etc rootfile directories.
I will have a go at doing an armv6l build with qemu on my x86 system and see what file gets created by pyfuse3 and what the name is. Then I can redo the patch with architecture specific pyfuse3 rootfiles.
Looks like this bug still hasn't finished with making life difficult.
Regards,
Adolf.
Regards,
Adolf
Begin forwarded message:
*From: *IPFire Nightly Builder <nightly-builds@ipfire.org mailto:nightly-builds@ipfire.org> *Subject: **[FAILED] Nightly Build of next (645c2eb) for armv6l on arm64-01.zrh.ipfire.org http://arm64-01.zrh.ipfire.org* *Date: *5 August 2022 at 16:38:50 BST *To: *Nightly Builds List <nightly-builds@lists.ipfire.org mailto:nightly-builds@lists.ipfire.org>
https://nightly.ipfire.org/next/2022-08-05%2009%3A12%3A54%20%2B0000-645c2eb8... https://nightly.ipfire.org/next/2022-08-05%2009%3A12%3A54%20%2B0000-645c2eb8/armv6l
commit 645c2eb8dce4a6a193f672aa47a696b2c7dc16de Author: Jon Murphy jon.murphy@ipfire.org Date: Mon Aug 1 10:11:22 2022 -0500
tftpd: add missing directory
- starting tftpd currently throws "missing directory" error
- this change corrects the issue
Signed-off-by: Jon Murphy jon.murphy@ipfire.org Acked-by: Stefan Schantl stefan.schantl@ipfire.org
https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=645c2eb8dce4a6a193f672...
Packaged toolchain compilation Checking for necessary space on disk [ DONE ] Set cache size limit to 4.0 GB Building LFS stage2 [ 1 ][ DONE ] linux (5.15.57) KCFG=-headers [ 22 ][ DONE ] man-pages (5.13) [ 7 ][ DONE ] glibc (2.35) [ 4:48 ][ DONE ] tzdata (2022a) [ 2 ][ DONE ] cleanup-toolchain [ 0 ][ DONE ] zlib (1.2.12) [ 2 ][ DONE ] zstd (1.5.2) [ 1 ][ DONE ] autoconf (2.71) [ 2 ][ DONE ] automake (1.16.3) [ 3 ][ DONE ] libtool (2.4.6) [ 6 ][ DONE ] binutils (2.37) [ 32 ][ DONE ] gmp (6.2.1) [ 29 ][ DONE ] mpfr (4.1.0) [ 15 ][ DONE ] libmpc (1.2.1) [ 5 ][ DONE ] libxcrypt (4.4.28) [ 11 ][ DONE ] file (5.40) [ 8 ][ DONE ] gcc (11.3.0) [ 5:36 ][ DONE ] attr (2.5.1) [ 6 ][ DONE ] acl (2.3.1) [ 9 ][ DONE ] sed (4.8) [ 25 ][ DONE ] berkeley (5.3.28) [ 24 ][ DONE ] coreutils (9.0) [ 2:02 ][ DONE ] iana-etc (20220414) [ 0 ][ DONE ] m4 (1.4.19) [ 33 ][ DONE ] bison (3.8.2) [ 31 ][ DONE ] ncurses (6.3) [ 27 ][ DONE ] perl (5.32.1) [ 2:04 ][ DONE ] readline (8.1) [ 7 ][ DONE ] bzip2 (1.0.8) [ 1 ][ DONE ] xz (5.2.5) [ 10 ][ DONE ] lzip (1.23) [ 1 ][ DONE ] pcre (8.45) [ 8 ][ DONE ] pcre2 (10.40) [ 6 ][ DONE ] gettext (0.21) [ 2:34 ][ DONE ] bash (5.1.16) [ 31 ][ DONE ] diffutils (3.8) [ 26 ][ DONE ] ed (1.17) [ 0 ][ DONE ] findutils (4.9.0) [ 40 ][ DONE ] flex (2.6.4) [ 9 ][ DONE ] gawk (5.1.1) [ 13 ][ DONE ] go (1.15.4) [ 0 ][ SKIP ] grep (3.7) [ 27 ][ DONE ] groff (1.22.4) [ 36 ][ DONE ] gperf (3.1) [ 3 ][ DONE ] gzip (1.12) [ 16 ][ DONE ] hostname (3.20) [ 0 ][ DONE ] whois (5.5.13) [ 1 ][ DONE ] kbd (2.2.0) [ 12 ][ DONE ] less (590) [ 5 ][ DONE ] pkg-config (0.29.2) [ 24 ][ DONE ] procps (v4.0.0) [ 15 ][ DONE ] make (4.3) [ 16 ][ DONE ] libpipeline (1.5.6) [ 18 ][ DONE ] man (2.10.2) [ 49 ][ DONE ] net-tools (2.10) [ 1 ][ DONE ] patch (2.7.6) [ 22 ][ DONE ] psmisc (23.4) [ 6 ][ DONE ] shadow (4.11.1) [ 16 ][ DONE ] sysklogd (1.5.1) [ 0 ][ DONE ] sysvinit (3.00) [ 1 ][ DONE ] tar (1.34) [ 34 ][ DONE ] texinfo (6.8) [ 25 ][ DONE ] util-linux (2.38) [ 40 ][ DONE ] vim (9.0) [ 19 ][ DONE ] e2fsprogs (1.46.5) [ 15 ][ DONE ] jq (1.6) [ 12 ][ DONE ] Building IPFire configroot [ 1 ][ DONE ] initscripts [ 1 ][ DONE ] backup [ 0 ][ DONE ] rust (2022-01-27) [ 17 ][ DONE ] openssl (1.1.1q) [ 1:26 ][ DONE ] kmod (30) [ 8 ][ DONE ] udev (3.2.6) [ 13 ][ DONE ] popt (1.18) [ 5 ][ DONE ] libedit (20210910-3.1) [ 6 ][ DONE ] libusb (1.0.25) [ 5 ][ DONE ] libpcap (1.10.1) [ 7 ][ DONE ] ppp (2.4.9) [ 2 ][ DONE ] pptp (1.10.0) [ 0 ][ DONE ] unzip (60) [ 2 ][ DONE ] which (2.21) [ 3 ][ DONE ] linux-firmware (20220610) [ 27 ][ DONE ] dvb-firmwares (20141125) [ 1 ][ DONE ] xr819-firmware (c01.08.0043) [ 0 ][ DONE ] zd1211-firmware (1.5) [ 0 ][ DONE ] rpi-firmware (20211127) [ 1 ][ DONE ] intel-microcode (20220510) [ 0 ][ SKIP ] pcengines-apu-firmware (4.17.0.1) [ 0 ][ SKIP ] bc (1.07.1) [ 4 ][ DONE ] u-boot (2021.07) MKIMAGE=1 [ 15 ][ DONE ] cpio (2.13) [ 32 ][ DONE ] mdadm (4.2) [ 1 ][ DONE ] dracut (056) [ 1 ][ DONE ] libaio (0.3.113) [ 1 ][ DONE ] lvm2 (2.02.188) [ 14 ][ DONE ] multipath-tools (0.8.9) [ 0 ][ DONE ] freetype (2.12.1) [ 5 ][ DONE ] libmnl (1.0.5) [ 3 ][ DONE ] libnfnetlink (1.0.2) [ 3 ][ DONE ] libnetfilter_queue (1.0.5) [ 4 ][ DONE ] libnetfilter_conntrack (1.0.8) [ 4 ][ DONE ] libnetfilter_cthelper (1.0.1) [ 3 ][ DONE ] libnetfilter_cttimeout (1.0.1) [ 3 ][ DONE ] iptables (1.8.8) [ 7 ][ DONE ] iproute2 (5.17.0) [ 3 ][ DONE ] screen (4.9.0) [ 9 ][ DONE ] elfutils (0.186) [ 12 ][ DONE ] linux (5.15.57) KCFG= [ 9:48 ][ DONE ] rtl8189es (03ac413135a355b55b693154c44b70f86a39732e) KCFG= [ 5 ][ DONE ] rtl8189fs (3129a665f835ce0342f9a85a0ce14a556e656b8c) KCFG= [ 4 ][ DONE ] rtl8812au (307d694076b056588c652c2bdaa543a89eb255d9) KCFG= [ 5 ][ DONE ] rtl8822bu (fd0b735e2e30d32f4d91497242cf6af288bdd082) KCFG= [ 7 ][ DONE ] xradio (354e8c32e7948d46a63796d0ca266b1f702999b0) KCFG= [ 2 ][ DONE ] linux-initrd ($(KVER)) KCFG= [ 14 ][ DONE ] libgpg-error (1.44) [ 13 ][ DONE ] libgcrypt (1.10.1) [ 15 ][ DONE ] libassuan (2.5.4) [ 9 ][ DONE ] nettle (3.7.3) [ 10 ][ DONE ] json-c (0.13.1) [ 6 ][ DONE ] libconfig (1.7.2) [ 16 ][ DONE ] libevent2 (2.1.12-stable) [ 13 ][ DONE ] expat (2.4.8) [ 6 ][ DONE ] apr (1.7.0) [ 23 ][ DONE ] aprutil (1.6.1) [ 5 ][ DONE ] unbound (1.16.2) [ 22 ][ DONE ] gnutls (3.7.7) [ 1:02 ][ DONE ] libuv (1.42.0) [ 13 ][ DONE ] bind (9.16.31) [ 33 ][ DONE ] dhcp (4.4.1) [ 23 ][ DONE ] dhcpcd (9.4.1) [ 3 ][ DONE ] boost (1_76_0) [ 2:09 ][ DONE ] linux-atm (2.4.1) [ 10 ][ DONE ] gdbm (1.23) [ 12 ][ DONE ] pam (1.5.2) [ 37 ][ DONE ] c-ares (1.17.1) [ 26 ][ DONE ] curl (7.83.1) [ 29 ][ DONE ] tcl (8.6.12) [ 29 ][ DONE ] sqlite (3390000) [ 5 ][ DONE ] libffi (3.4.2) [ 6 ][ DONE ] python3 (3.10.1) [ 54 ][ DONE ] rust (2022-01-27) [ 0 ][ DONE ] rust-dissimilar (1.0.3) [ 5 ][ DONE ] rust-cfg-if (1.0.0) [ 0 ][ DONE ] rust-libc (0.2.108) [ 4 ][ DONE ] rust-getrandom (0.2.4) [ 4 ][ DONE ] rust-typenum (1.15.0) [ 5 ][ DONE ] rust-version-check (0.9.4) [ 3 ][ DONE ] rust-generic-array (0.14.4) [ 5 ][ DONE ] rust-cipher (0.3.0) [ 6 ][ DONE ] rust-hex (0.4.3) [ 2 ][ DONE ] rust-unicode-xid (0.2.1) [ 0 ][ DONE ] rust-proc-macro2 (1.0.36) [ 6 ][ DONE ] rust-quote (1.0.15) [ 7 ][ DONE ] rust-syn (1.0.86) [ 29 ][ DONE ] rust-home (0.5.3) [ 1 ][ DONE ] rust-lazy-static (1.4.0) [ 1 ][ DONE ] rust-memchr (2.4.1) [ 3 ][ DONE ] rust-aho-corasick (0.7.18) [ 7 ][ DONE ] rust-regex-syntax (0.6.25) [ 20 ][ DONE ] rust-regex (1.5.3) [ 40 ][ DONE ] rust-ucd-trie (0.1.3) [ 2 ][ DONE ] rust-pest (2.1.3) [ 3 ][ DONE ] rust-semver-parser (0.7.0) [ 3 ][ DONE ] rust-semver (0.9.0) [ 3 ][ DONE ] rust-same-file (1.0.6) [ 1 ][ DONE ] rust-walkdir (2.3.2) [ 2 ][ DONE ] rust-dirs (1.0.5) [ 4 ][ DONE ] rust-toolchain_find (0.1.4) [ 31 ][ DONE ] rust-serde (1.0.136) [ 10 ][ DONE ] rust-itoa (1.0.1) [ 1 ][ DONE ] rust-ryu (1.0.9) [ 1 ][ DONE ] rust-serde_json (1.0.78) [ 16 ][ DONE ] rust-synstructure (0.12.6) [ 35 ][ DONE ] rust-block-buffer (0.9.0) [ 5 ][ DONE ] rust-crypto-common (0.1.1) [ 6 ][ DONE ] rust-digest (0.9.0) [ 6 ][ DONE ] rust-ppv-lite86 (0.2.16) [ 1 ][ DONE ] rust-rand_core (0.6.3) [ 1 ][ DONE ] rust-rand_core-0.4.2 (0.4.2) [ 1 ][ DONE ] rust-rand_core-0.3.1 (0.3.1) [ 1 ][ DONE ] rust-rand_chacha (0.3.1) [ 6 ][ DONE ] rust-rand_hc (0.3.1) [ 2 ][ DONE ] rust-rand (0.8.4) [ 9 ][ DONE ] rust-rdrand (0.4.0) [ 1 ][ DONE ] rust-rand-0.4 (0.4.6) [ 6 ][ DONE ] rust-log (0.4.14) [ 2 ][ DONE ] rust-num_cpus (1.13.1) [ 5 ][ DONE ] rust-crossbeam-utils (0.8.6) [ 3 ][ DONE ] rust-autocfg (1.0.1) [ 3 ][ DONE ] rust-memoffset (0.6.5) [ 3 ][ DONE ] rust-scopeguard (1.1.0) [ 1 ][ DONE ] rust-crossbeam-epoch (0.9.6) [ 5 ][ DONE ] rust-crossbeam-deque (0.8.1) [ 5 ][ DONE ] rust-either (1.6.1) [ 1 ][ DONE ] rust-crossbeam-channel (0.5.2) [ 4 ][ DONE ] rust-rayon-core (1.9.1) [ 9 ][ DONE ] rust-rayon (1.5.1) [ 13 ][ DONE ] rust-remove_dir_all (0.5.3) [ 0 ][ DONE ] rust-tempdir (0.3.7) [ 6 ][ DONE ] rust-glob (0.3.0) [ 3 ][ DONE ] rust-once_cell (1.9.0) [ 1 ][ DONE ] rust-termcolor (1.1.2) [ 2 ][ DONE ] rust-toml (0.5.8) [ 22 ][ DONE ] rust-serde_derive (1.0.136) [ 1:03 ][ DONE ] rust-trybuild (1.0.54) [ 2:02 ][ DONE ] rust-unindent (0.1.7) [ 2 ][ DONE ] rust-proc-macro-hack (0.5.19) [ 6 ][ DONE ] rust-indoc-impl (0.3.6) [ 33 ][ DONE ] rust-indoc (1.0.3) [ 4 ][ DONE ] rust-indoc-0.3.6 (0.3.6) [ 32 ][ DONE ] rust-instant (0.1.12) [ 1 ][ DONE ] rust-lock_api (0.4.5) [ 1 ][ DONE ] rust-smallvec (1.8.0) [ 1 ][ DONE ] rust-parking_lot_core (0.8.5) [ 4 ][ DONE ] rust-parking_lot (0.11.2) [ 7 ][ DONE ] rust-paste-impl (0.1.18) [ 10 ][ DONE ] rust-paste (1.0.3) [ 4 ][ DONE ] rust-paste-0.1.18 (0.1.18) [ 9 ][ DONE ] rust-ctor (0.1.21) [ 53 ][ DONE ] rust-ghost (0.1.2) [ 35 ][ DONE ] rust-inventory-impl (0.1.4) [ 31 ][ DONE ] rust-inventory (0.1.4) [ 1:03 ][ DONE ] rust-pyo3-build-config (0.15.1) [ 14 ][ DONE ] rust-pyo3-macros-backend (0.15.1) [ 1:05 ][ DONE ] rust-pyo3-macros (0.15.1) [ 1:14 ][ DONE ] rust-pyo3 (0.15.1) [ 1:36 ][ DONE ] rust-num-traits (0.2.15) [ 6 ][ DONE ] rust-num-integer (0.1.45) [ 8 ][ DONE ] rust-num_threads (0.1.5) [ 1 ][ DONE ] rust-time (0.1.43) [ 6 ][ DONE ] rust-chrono (0.4.19) [ 12 ][ DONE ] rust-asn1_derive (0.8.7) [ 40 ][ DONE ] rust-asn1 (0.8.7) [ 43 ][ DONE ] rust-proc-macro-error-attr (1.0.4) [ 10 ][ DONE ] rust-proc-macro-error (1.0.4) [ 15 ][ DONE ] rust-Inflector (0.11.4) [ 31 ][ DONE ] rust-ouroboros_macro (0.13.0) [ 1:10 ][ DONE ] rust-aliasable (0.1.3) [ 1 ][ DONE ] rust-stable_deref_trait (1.2.0) [ 1 ][ DONE ] rust-ouroboros (0.13.0) [ 1:10 ][ DONE ] rust-base64 (0.13.0) [ 2 ][ DONE ] rust-pem (1.0.2) [ 3 ][ DONE ] gdb (12.1) [ 1:01 ][ DONE ] grub (2.06) [ 0 ][ SKIP ] efivar (37) [ 0 ][ SKIP ] efibootmgr (17) [ 0 ][ SKIP ] libtasn1 (4.18.0) [ 14 ][ DONE ] p11-kit (0.24.1) [ 15 ][ DONE ] ca-certificates (20220625) [ 3 ][ DONE ] fireinfo (2.2.0) [ 9 ][ DONE ] libnet (1.1.6) [ 7 ][ DONE ] libnl-3 (3.5.0) [ 18 ][ DONE ] libidn (1.38) [ 16 ][ DONE ] nasm (2.15.05) [ 11 ][ DONE ] libarchive (3.6.0) [ 28 ][ DONE ] cmake (3.21.0) [ 31 ][ DONE ] ninja (1.11.0) [ 2 ][ DONE ] meson (0.62.1) [ 3 ][ DONE ] libjpeg (2.0.4) [ 3 ][ DONE ] openjpeg (2.4.0) [ 2 ][ DONE ] libexif (0.6.22) [ 6 ][ DONE ] libpng (1.6.37) [ 5 ][ DONE ] libtiff (4.3.0) [ 12 ][ DONE ] gd (2.3.3) [ 6 ][ DONE ] slang (2.3.2) [ 19 ][ DONE ] newt (0.52.21) [ 3 ][ DONE ] libsmooth [ 8 ][ DONE ] libcap (2.64) [ 2 ][ DONE ] libcap-ng (0.8.3) [ 5 ][ DONE ] pciutils (3.8.0) [ 1 ][ DONE ] usbutils (014) [ 13 ][ DONE ] libxml2 (2.9.14) [ 8 ][ DONE ] libxslt (1.1.35) [ 9 ][ DONE ] perl-BerkeleyDB (0.63) [ 2 ][ DONE ] cyrus-sasl (2.1.26) [ 19 ][ DONE ] openldap (2.6.1) [ 44 ][ DONE ] apache2 (2.4.54) [ 35 ][ DONE ] web-user-interface [ 2 ][ DONE ] flag-icons (2.6) [ 1 ][ DONE ] jquery (3.6.0) [ 1 ][ DONE ] bootstrap (4.0.0-alpha.6) [ 0 ][ DONE ] arping (2.21) [ 7 ][ DONE ] beep (1.3) [ 0 ][ DONE ] libssh (0.9.6) [ 9 ][ DONE ] libinih (r55) [ 3 ][ DONE ] cdrkit (1.1.11) [ 6 ][ DONE ] dosfstools (4.2) [ 3 ][ DONE ] exfatprogs (1.1.3) [ 4 ][ DONE ] reiserfsprogs (3.6.27) [ 11 ][ DONE ] liburcu (0.13.0) [ 15 ][ DONE ] xfsprogs (5.18.0) [ 37 ][ DONE ] sysfsutils (2.1.1) [ 9 ][ DONE ] fuse (3.11.0) [ 4 ][ DONE ] ntfs-3g (2021.8.22) [ 12 ][ DONE ] ethtool (5.16) [ 3 ][ DONE ] fcron (3.2.1) [ 9 ][ DONE ] perl-ExtUtils-PkgConfig (1.16) [ 1 ][ DONE ] perl-GD (2.73) [ 2 ][ DONE ] perl-GD-Graph (1.54) [ 1 ][ DONE ] perl-GD-TextUtil (0.86) [ 1 ][ DONE ] perl-Device-SerialPort (1.000002) [ 7 ][ DONE ] perl-Device-Modem (1.56) [ 1 ][ DONE ] perl-Apache-Htpasswd (1.9) [ 1 ][ DONE ] perl-Parse-Yapp (1.21) [ 1 ][ DONE ] perl-Data-UUID (1.224) [ 2 ][ DONE ] perl-Try-Tiny (0.31) [ 1 ][ DONE ] perl-HTTP-Message (6.36) [ 1 ][ DONE ] perl-HTTP-Date (6.05) [ 1 ][ DONE ] gnupg (1.4.23) [ 17 ][ DONE ] hdparm (9.64) [ 1 ][ DONE ] whatmask (1.2) [ 2 ][ DONE ] libtirpc (1.3.1) [ 6 ][ DONE ] conntrack-tools (1.4.6) [ 10 ][ DONE ] iputils (20210202) [ 3 ][ DONE ] l7-protocols (2009-05-10) [ 1 ][ DONE ] hwdata [ 1 ][ DONE ] logrotate (3.20.1) [ 5 ][ DONE ] logwatch (7.7) [ 1 ][ DONE ] misc-progs [ 2 ][ DONE ] nano (6.3) [ 22 ][ DONE ] perl-URI (5.09) [ 1 ][ DONE ] perl-CGI (4.54) [ 2 ][ DONE ] perl-Switch (2.17) [ 0 ][ DONE ] perl-HTML-Tagset (3.04) [ 1 ][ DONE ] perl-HTML-Parser (3.45) [ 2 ][ DONE ] perl-HTML-Template (2.94) [ 1 ][ DONE ] perl-Compress-Zlib (1.35) [ 1 ][ DONE ] perl-Digest (1.19) [ 1 ][ DONE ] perl-Digest-SHA1 (2.13) [ 1 ][ DONE ] perl-Digest-HMAC (1.03) [ 1 ][ DONE ] perl-libwww (6.62) [ 1 ][ DONE ] perl-LWP-Protocol-https (6.10) [ 1 ][ DONE ] perl-Net-HTTP (6.22) [ 1 ][ DONE ] perl-Net-DNS (1.30) [ 3 ][ DONE ] perl-Net-IPv4Addr (0.10) [ 1 ][ DONE ] perl-Net_SSLeay (1.88) [ 3 ][ DONE ] perl-IO-Stringy (2.110) [ 1 ][ DONE ] perl-IO-Socket-SSL (2.066) [ 1 ][ DONE ] perl-Unix-Syslog (1.1) [ 1 ][ DONE ] perl-Mail-Tools (2.07) [ 1 ][ DONE ] perl-MIME-Tools (5.509) [ 2 ][ DONE ] perl-Net-Server (0.97) [ 1 ][ DONE ] perl-Canary-Stability (2013) [ 1 ][ DONE ] perl-Convert-TNEF (0.18) [ 1 ][ DONE ] perl-Convert-UUlib (1.8) [ 3 ][ DONE ] perl-Archive-Tar (1.29) [ 1 ][ DONE ] perl-Archive-Zip (1.16) [ 1 ][ DONE ] perl-Text-Tabs+Wrap (2013.0523) [ 1 ][ DONE ] perl-XML-Parser (2.46) [ 2 ][ DONE ] perl-Crypt-PasswdMD5 (1.41) [ 1 ][ DONE ] perl-Net-Telnet (3.03) [ 1 ][ DONE ] perl-JSON (4.05) [ 1 ][ DONE ] python3-setuptools (62.0.0) [ 8 ][ DONE ] python3-inotify (0.2.10) [ 1 ][ DONE ] python3-docutils (0.18.1) [ 2 ][ DONE ] python3-daemon (2.3.0) [ 1 ][ DONE ] glib (2.71.1) [ 26 ][ DONE ] ntp (4.2.8p15) [ 50 ][ DONE ] openssh (9.0p1) [ 41 ][ DONE ] fontconfig (2.13.1) [ 14 ][ DONE ] dejavu-fonts-ttf (2.37) [ 1 ][ DONE ] ubuntu-font-family (0.83) [ 1 ][ DONE ] freefont (20060126) [ 0 ][ DONE ] pixman (0.40.0) [ 10 ][ DONE ] cairo (1.16.0) [ 29 ][ DONE ] harfbuzz (4.4.1) [ 15 ][ DONE ] fribidi (1.0.12) [ 5 ][ DONE ] pango (1.50.6) [ 8 ][ DONE ] rrdtool (1.8.0) [ 22 ][ DONE ] setup [ 12 ][ DONE ] jansson (2.14) [ 5 ][ DONE ] yaml (0.2.5) [ 4 ][ DONE ] libhtp (0.5.40) [ 11 ][ DONE ] colm (0.13.0.6) [ 15 ][ DONE ] ragel (7.0.0.11) [ 1:20 ][ DONE ] hyperscan (5.4.0) [ 0 ][ SKIP ] suricata (5.0.10) [ 2:26 ][ DONE ] ids-ruleset-sources [ 0 ][ DONE ] ipblocklist-sources [ 1 ][ DONE ] squid (5.6) [ 2:08 ][ DONE ] squidguard (1.6.0) [ 7 ][ DONE ] calamaris (2.59) [ 1 ][ DONE ] tcpdump (4.99.1) [ 6 ][ DONE ] traceroute (2.1.0) [ 1 ][ DONE ] vlan (1.9) [ 0 ][ DONE ] wireless (30.pre9) [ 1 ][ DONE ] pakfire (0.99) [ 1 ][ DONE ] spandsp (0.0.6) [ 10 ][ DONE ] lz4 (1.9.3) [ 10 ][ DONE ] lzo (2.10) [ 14 ][ DONE ] openvpn (2.5.6) [ 24 ][ DONE ] mpage (2.5.7) [ 0 ][ DONE ] dbus (1.14.0) [ 21 ][ DONE ] intltool (0.51.0) [ 1 ][ DONE ] libdaemon (0.14) [ 7 ][ DONE ] avahi (0.8) [ 20 ][ DONE ] cups (2.4.2) [ 22 ][ DONE ] lcms2 (2.13.1) [ 8 ][ DONE ] ghostscript (9.56.1) [ 31 ][ DONE ] qpdf (10.4.0) [ 16 ][ DONE ] poppler (22.04.0) [ 7 ][ DONE ] poppler-data (0.4.11) [ 2 ][ DONE ] cups-filters (1.28.14) [ 12 ][ DONE ] epson-inkjet-printer-escpr (1.6.12) [ 7 ][ DONE ] cups-pdf (3.0.1) [ 1 ][ DONE ] foomatic (4.0.9) [ 57 ][ DONE ] hplip (3.22.4) [ 14 ][ DONE ] cifs-utils (6.14) [ 6 ][ DONE ] krb5 (1.20) [ 27 ][ DONE ] rpcsvc-proto (1.4.3) [ 3 ][ DONE ] samba (4.16.4) [ 6:11 ][ DONE ] netatalk (3.1.13) [ 44 ][ DONE ] sudo (1.9.11p3) [ 27 ][ DONE ] mc (4.8.28) [ 30 ][ DONE ] wget (1.21.3) [ 34 ][ DONE ] bridge-utils (1.5) [ 3 ][ DONE ] smartmontools (7.3) [ 6 ][ DONE ] htop (3.2.1) [ 8 ][ DONE ] chkconfig (1.5) [ 0 ][ DONE ] postfix (3.7.2) [ 13 ][ DONE ] fetchmail (6.4.19) [ 8 ][ DONE ] clamav (0.105.1) [ 3:19 ][ DONE ] perl-NetAddr-IP (4.079) [ 14 ][ DONE ] dma (0.13) [ 2 ][ DONE ] alsa (1.2.5.1) [ 26 ][ DONE ] mpfire [ 1 ][ DONE ] guardian (2.0.2) [ 0 ][ DONE ] libid3tag (0.15.1b) [ 7 ][ DONE ] libmad (0.15.1b) [ 11 ][ DONE ] libogg (1.3.5) [ 4 ][ DONE ] libvorbis (1.3.7) [ 5 ][ DONE ] flac (1.3.3) [ 12 ][ DONE ] lame (3.100) [ 8 ][ DONE ] sox (14.4.2) [ 27 ][ DONE ] soxr (0.1.3) [ 4 ][ DONE ] libshout (2.4.3) [ 7 ][ DONE ] xvid (1.3.7) [ 2 ][ DONE ] libmpeg2 (0.4.1) [ 10 ][ DONE ] gnump3d (3.0) [ 2 ][ DONE ] rsync (3.2.4) [ 18 ][ DONE ] rpcbind (1.2.6) [ 3 ][ DONE ] keyutils (1.5.11) [ 1 ][ DONE ] nfs (2.6.1) [ 19 ][ DONE ] gnu-netcat (0.7.1) [ 7 ][ DONE ] ncat (7.91) [ 33 ][ DONE ] nmap (7.92) [ 38 ][ DONE ] etherwake (1.09) [ 0 ][ DONE ] bwm-ng (0.6.1-f54b3fa) [ 8 ][ DONE ] sysstat (12.5.4) [ 4 ][ DONE ] strongswan (5.9.6) [ 52 ][ DONE ] rng-tools (6.14) [ 5 ][ DONE ] lsof (4.95.0.linux) [ 2 ][ DONE ] br2684ctl [ 0 ][ DONE ] pcmciautils (014) [ 2 ][ DONE ] lm_sensors (3-6-0) [ 1 ][ DONE ] libstatgrab (0.92) [ 15 ][ DONE ] liboping (1.3.4) [ 6 ][ DONE ] collectd (4.10.9) [ 1:39 ][ DONE ] elinks (0.12pre6) [ 19 ][ DONE ] igmpproxy (0.3) [ 2 ][ DONE ] opus (1.3.1) [ 9 ][ DONE ] python3-pyparsing (3.0.7) [ 2 ][ DONE ] spice-protocol (0.14.3) [ 1 ][ DONE ] spice (0.15.0) [ 34 ][ DONE ] sdl2 (2.0.22) [ 19 ][ DONE ] libusbredir (0.8.0) [ 4 ][ DONE ] libseccomp (2.5.4) [ 5 ][ DONE ] qemu (7.0.0) [ 1:25 ][ DONE ] netsnmpd (5.9.1) [ 2:54 ][ DONE ] nagios_nrpe (4.1.0) [ 59 ][ DONE ] nagios-plugins (2.3.3) [ 52 ][ DONE ] icinga (1.11.4) [ 24 ][ DONE ] observium-agent (18.9.1) [ 3 ][ DONE ] ebtables (2.0.10-4) [ 1 ][ DONE ] faad2 (2_10_0) [ 13 ][ DONE ] alac (0.0.7) [ 10 ][ DONE ] ffmpeg (4.4) [ 37 ][ DONE ] vdr (2.4.7) [ 5 ][ DONE ] vdr_streamdev (0.6.1) [ 3 ][ DONE ] vdr_epgsearch (2.4.0+git20191101) [ 12 ][ DONE ] vdr_dvbapi (2.2.5) [ 1 ][ DONE ] vdr_eepg (master) [ 2 ][ DONE ] w_scan (20170107) [ 3 ][ DONE ] fmt (9.0.0) [ 4 ][ DONE ] mpd (0.23.8) [ 11 ][ DONE ] libmpdclient (2.19) [ 3 ][ DONE ] mpc (0.34) [ 2 ][ DONE ] perl-Net-CIDR-Lite (0.21) [ 1 ][ DONE ] perl-Net-SMTP-SSL (1.04) [ 1 ][ DONE ] perl-MIME-Base64 (3.16) [ 1 ][ DONE ] perl-Authen-SASL (2.16) [ 1 ][ DONE ] perl-MIME-Lite (3.033) [ 2 ][ DONE ] perl-Email-Date-Format (1.005) [ 1 ][ DONE ] git (2.37.1) [ 10 ][ DONE ] squidclamav (5.11) [ 7 ][ DONE ] vnstat (2.9) [ 6 ][ DONE ] iw (5.9) [ 0 ][ DONE ] wpa_supplicant (2.10) [ 4 ][ DONE ] hostapd (2_10) [ 2 ][ DONE ] syslinux (6.04-pre1) [ 0 ][ SKIP ] tftpd (5.2) [ 6 ][ DONE ] cpufrequtils (008) [ 2 ][ DONE ] gutenprint (5.3.4) [ 14 ][ DONE ] apcupsd (3.14.14) [ 8 ][ DONE ] fireperf (0.2.0) [ 8 ][ DONE ] iperf (2.1.7) [ 7 ][ DONE ] iperf3 (3.10.1) [ 5 ][ DONE ] 7zip (17.04) [ 4 ][ DONE ] lynis (3.0.8) [ 1 ][ DONE ] sshfs (3.7.2) [ 2 ][ DONE ] taglib (1.12) [ 3 ][ DONE ] sslh (1.22c) [ 1 ][ DONE ] perl-gettext (1.05) [ 1 ][ DONE ] perl-Sort-Naturally (1.03) [ 1 ][ DONE ] vdradmin (3.6.10) [ 2 ][ DONE ] perl-DBI (1.631) [ 3 ][ DONE ] perl-DBD-SQLite (1.40) [ 2 ][ DONE ] perl-File-ReadBackwards (1.05) [ 1 ][ DONE ] openvmtools (stable-12.0.5) [ 0 ][ SKIP ] joe (4.6) [ 9 ][ DONE ] monit (5.32.0) [ 21 ][ DONE ] nut (2.8.0) [ 32 ][ DONE ] watchdog (5.16) [ 4 ][ DONE ] usb_modeswitch (2.6.1) [ 1 ][ DONE ] usb_modeswitch_data (20191128) [ 3 ][ DONE ] zerofree (1.1.1) [ 0 ][ DONE ] minicom (2.8) [ 7 ][ DONE ] ddrescue (1.25) [ 1 ][ DONE ] powertop (2.14) [ 18 ][ DONE ] parted (3.5) [ 31 ][ DONE ] swig (4.0.2) [ 12 ][ DONE ] dtc (1.6.1) [ 0 ][ SKIP ] u-boot (2021.07) [ 1:55 ][ DONE ] u-boot-friendlyarm (5e8607b-nanopi-r1-binary) [ 0 ][ DONE ] wireless-regdb (2022.02.18) [ 1 ][ DONE ] ddns (014) [ 5 ][ DONE ] python3-pycparser (2.21) [ 2 ][ DONE ] python3-charset-normalizer (2.0.12) [ 2 ][ DONE ] python3-certifi (2021.10.8) [ 1 ][ DONE ] python3-idna (3.3) [ 1 ][ DONE ] python3-requests (2.27.1) [ 2 ][ DONE ] python3-toml (0.10.2) [ 1 ][ DONE ] python3-pyproject2setuppy (22) [ 1 ][ DONE ] python3-tomli (2.0.1) [ 2 ][ DONE ] python3-pep517 (0.12.0) [ 0 ][ DONE ] python3-build (0.7.0) [ 1 ][ DONE ] python3-install (0.0.3) [ 1 ][ DONE ] python3-urllib3 (1.26.9) [ 2 ][ DONE ] python3-flit (3.7.1) [ 2 ][ DONE ] python3-packaging (21.3) [ 1 ][ DONE ] python3-typing-extensions (4.1.1) [ 1 ][ DONE ] python3-semantic-version (2.9.0) [ 2 ][ DONE ] python3-setuptools-scm (6.4.2) [ 1 ][ DONE ] python3-setuptools-rust (1.2.0) [ 2 ][ DONE ] python3-six (1.16.0) [ 1 ][ DONE ] python3-dateutil (2.8.2) [ 2 ][ DONE ] python3-jmespath (1.0.0) [ 1 ][ DONE ] python3-colorama (0.4.4) [ 1 ][ DONE ] python3-yaml (6.0) [ 2 ][ DONE ] python3-s3transfer (0.5.2) [ 1 ][ DONE ] python3-rsa (4.8) [ 1 ][ DONE ] python3-pyasn1 (0.4.8) [ 2 ][ DONE ] python3-botocore (1.25.12) [ 5 ][ DONE ] python3-cffi (1.15.0) [ 2 ][ DONE ] python3-cryptography (36.0.2) [ 3:13 ][ DONE ] python3-circuitbreaker (1.3.2) [ 1 ][ DONE ] python3-pytz (2022.1) [ 4 ][ DONE ] python3-click (8.1.2) [ 2 ][ DONE ] python3-arrow (1.2.2) [ 1 ][ DONE ] python3-terminaltables (3.1.10) [ 2 ][ DONE ] python3-pkgconfig (1.5.5) [ 1 ][ DONE ] python3-msgpack (1.0.3) [ 2 ][ DONE ] python3-attr (0.3.2) [ 1 ][ DONE ] python3-attrs (21.4.0) [ 2 ][ DONE ] python3-sniffio (1.2.0) [ 1 ][ DONE ] python3-sortedcontainers (2.4.0) [ 1 ][ DONE ] python3-outcome (1.2.0) [ 2 ][ DONE ] python3-async_generator (1.10) [ 1 ][ DONE ] python3-Cython (0.29.30) [ 1:02 ][ DONE ] python3-trio (0.21.0) [ 2 ][ DONE ] python3-pyfuse3 (3.2.1) [ 19 ][ DONE ] aws-cli (1.23.12) [ 14 ][ DONE ] oci-python-sdk (2.64.0) [ 51 ][ DONE ] oci-cli (3.7.3) [ 12 ][ DONE ] transmission (3.00) [ 15 ][ DONE ] mtr (0.95) [ 5 ][ DONE ] minidlna (1.3.0) [ 10 ][ DONE ] acpid (2.0.32) [ 4 ][ DONE ] fping (5.0) [ 3 ][ DONE ] telnet (0.17) [ 3 ][ DONE ] xinetd (2.3.15) [ 7 ][ DONE ] stress (1.0.5) [ 4 ][ DONE ] sarg (2.4.0) [ 9 ][ DONE ] nginx (1.21.6) [ 10 ][ DONE ] sysbench (1.0.20) [ 0 ][ SKIP ] strace (5.17) [ 33 ][ DONE ] ltrace (0.7.3) [ 8 ][ DONE ] ipfire-netboot (v2.0) [ 0 ][ SKIP ] lcdproc (0.5.9) [ 10 ][ DONE ] keepalived (2.2.7) [ 11 ][ DONE ] ipvsadm (1.31) [ 1 ][ DONE ] perl-Carp-Clan (6.08) [ 1 ][ DONE ] perl-Date-Calc (6.4) [ 2 ][ DONE ] perl-Date-Manip (6.86) [ 9 ][ DONE ] perl-File-Tail (1.3) [ 1 ][ DONE ] perl-TimeDate (2.33) [ 1 ][ DONE ] swatch (3.2.4) [ 2 ][ DONE ] tor (0.4.7.8) [ 34 ][ DONE ] wavemon (0.7.5) [ 4 ][ DONE ] iptraf-ng (1.2.1) [ 1 ][ DONE ] iotop (0.6) [ 1 ][ DONE ] stunnel (5.63) [ 9 ][ DONE ] bacula (9.6.7) [ 28 ][ DONE ] perl-Font-TTF (1.06) [ 2 ][ DONE ] perl-IO-String (1.08) [ 1 ][ DONE ] perl-PDF-API2 (2.033) [ 3 ][ DONE ] proxy-accounting (1.0.4) [ 0 ][ DONE ] tmux (3.3) [ 9 ][ DONE ] perl-Text-CSV_XS (1.12) [ 2 ][ DONE ] lua (5.4.4) [ 1 ][ DONE ] haproxy (2.6.0) [ 1 ][ DONE ] ipset (7.15) [ 14 ][ DONE ] dnsdist (1.7.2) [ 0 ][ SKIP ] bird (2.0.9) [ 5 ][ DONE ] libyang (2.0.194) [ 3 ][ DONE ] frr (8.0.1) [ 40 ][ DONE ] dmidecode (3.3) [ 0 ][ SKIP ] mcelog (181) [ 0 ][ SKIP ] libpciaccess (0.16) [ 6 ][ DONE ] libyajl (2.1.0) [ 2 ][ DONE ] libvirt (7.10.0) [ 0 ][ SKIP ] libtalloc (2.3.1) [ 28 ][ DONE ] freeradius (3.0.23) [ 59 ][ DONE ] perl-common-sense (3.74) [ 1 ][ DONE ] perl-inotify2 (1.22) [ 1 ][ DONE ] perl-Net-IP (1.26) [ 2 ][ DONE ] wio (1.3.2) [ 1 ][ DONE ] iftop (1.0pre4) [ 4 ][ DONE ] mdns-repeater (1.10) [ 0 ][ DONE ] i2c-tools (4.3) [ 1 ][ DONE ] nss-myhostname (0.3) [ 7 ][ DONE ] dehydrated (0.7.0) [ 1 ][ DONE ] shairport-sync (3.3.8) [ 10 ][ DONE ] borgbackup (1.2.0) [ 24 ][ DONE ] lmdb (0.9.29) [ 1 ][ DONE ] knot (3.1.7) [ 11 ][ DONE ] spectre-meltdown-checker (0.45) [ 1 ][ DONE ] zabbix_agentd (6.0.6) [ 20 ][ DONE ] flashrom (1.2) [ 0 ][ SKIP ] firmware-update (20210107) [ 4 ][ DONE ] tshark (3.6.3) [ 41 ][ DONE ] speedtest-cli (2.1.3) [ 1 ][ DONE ] amazon-ssm-agent (3.0.356.0) [ 0 ][ SKIP ] libloc (0.9.13) [ 34 ][ DONE ] ncdu (1.17) [ 3 ][ DONE ] lshw (B.02.19.2) [ 1 ][ DONE ] socat (1.7.4.2) [ 24 ][ DONE ] libcdada (0.3.5) [ 20 ][ DONE ] pmacct (1.7.6) [ 1:56 ][ DONE ] squid-asnbl (0.2.3) [ 1 ][ DONE ] qemu-ga (7.0.0) [ 0 ][ DONE ] gptfdisk (1.0.9) [ 2 ][ DONE ] oath-toolkit (2.6.7) [ 1:16 ][ DONE ] qrencode (4.1.1) [ 4 ][ DONE ] perl-File-Remove (1.60) [ 1 ][ DONE ] perl-Module-Build (0.4231) [ 2 ][ DONE ] perl-Module-ScanDeps (1.31) [ 1 ][ DONE ] perl-YAML-Tiny (1.73) [ 1 ][ DONE ] perl-Module-Install (1.19) [ 2 ][ DONE ] perl-Imager (1.012) [ 9 ][ DONE ] perl-Imager-QRCode (0.035) [ 2 ][ DONE ] perl-MIME-Base32 (1.303) [ 1 ][ DONE ] perl-URI-Encode (1.1.1) [ 1 ][ DONE ] Building installer memtest (5.01) [ 0 ][ SKIP ] installer [ 12 ][ DONE ] strip [ 46 ][ DONE ] Building packages Generating packages list from logs [ DONE ] cdrom [ 3:14 ][ DONE ] flash-images [ 3:57 ][ DONE ] core-updates [ 42 ][ DONE ] samba (4.16.4) [ 32 ][ DONE ] python3-msgpack (1.0.3) [ 0 ][ DONE ] python3-cffi (1.15.0) [ 0 ][ DONE ] vdr_dvbapi (2.2.5) [ 0 ][ DONE ] borgbackup (1.2.0) [ 2 ][ DONE ] perl-gettext (1.05) [ 0 ][ DONE ] libshout (2.4.3) [ 0 ][ DONE ] speedtest-cli (2.1.3) [ 0 ][ DONE ] python3-sortedcontainers (2.4.0) [ 0 ][ DONE ] libmad (0.15.1b) [ 0 ][ DONE ] iotop (0.6) [ 1 ][ DONE ] cpufrequtils (008) [ 0 ][ DONE ] sysbench (1.0.20) [ 0 ][ SKIP ] python3-pytz (2022.1) [ 0 ][ DONE ] python3-circuitbreaker (1.3.2) [ 0 ][ DONE ] libid3tag (0.15.1b) [ 0 ][ DONE ] rsync (3.2.4) [ 0 ][ DONE ] netatalk (3.1.13) [ 0 ][ DONE ] vdradmin (3.6.10) [ 1 ][ DONE ] python3-rsa (4.8) [ 0 ][ DONE ] perl-common-sense (3.74) [ 0 ][ DONE ] python3-async_generator (1.10) [ 0 ][ DONE ] firmware-update (20210107) [ 0 ][ DONE ] python3-pyasn1 (0.4.8) [ 1 ][ DONE ] dnsdist (1.7.2) [ 0 ][ SKIP ] postfix (3.7.2) [ 5 ][ DONE ] epson-inkjet-printer-escpr (1.6.12) [ 6 ][ DONE ] aws-cli (1.23.12) [ 4 ][ DONE ] sdl2 (2.0.22) [ 1 ][ DONE ] mpd (0.23.8) [ 0 ][ DONE ] iftop (1.0pre4) [ 1 ][ DONE ] oci-python-sdk (2.64.0) [ 23 ][ DONE ] python3-msgpack (1.0.3) [ 0 ][ DONE ] libtalloc (2.3.1) [ 1 ][ DONE ] python3-attr (0.3.2) [ 0 ][ DONE ] flashrom (1.2) [ 0 ][ SKIP ] mcelog (181) [ 0 ][ SKIP ] tmux (3.3) [ 0 ][ DONE ] haproxy (2.6.0) [ 1 ][ DONE ] igmpproxy (0.3) �� [ 1 ][ DONE ] sslh (1.22c) [ 0 ][ DONE ] iperf (2.1.7) [ 0 ][ DONE ] watchdog (5.16) [ 0 ][ DONE ] swatch (3.2.4) [ 0 ][ DONE ] alsa (1.2.5.1) [ 7 ][ DONE ] gptfdisk (1.0.9) [ 0 ][ DONE ] make (4.3) [ 0 ][ DONE ] python3-yaml (6.0) [ 1 ][ DONE ] opus (1.3.1) [ 0 ][ DONE ] openvmtools (stable-12.0.5) [ 0 ][ SKIP ] libcdada (0.3.5) [ 0 ][ DONE ] w_scan (20170107) [ 0 ][ DONE ] clamav (0.105.1) [ 5 ][ DONE ] python3-s3transfer (0.5.2) [ 0 ][ DONE ] git (2.37.1) [ 10 ][ DONE ] spice (0.15.0) [ 0 ][ DONE ] python3-typing-extensions (4.1.1) [ 0 ][ DONE ] ltrace (0.7.3) [ 0 ][ DONE ] python3-pkgconfig (1.5.5) [ 0 ][ DONE ] perl-Carp-Clan (6.08) [ 0 ][ DONE ] perl-Parse-Yapp (1.21) [ 0 ][ DONE ] monit (5.32.0) [ 0 ][ DONE ] libexif (0.6.22) [ 1 ][ DONE ] pmacct (1.7.6) [ 1 ][ DONE ] python3-dateutil (2.8.2) [ 0 ][ DONE ] zabbix_agentd (6.0.6) [ 0 ][ DONE ] python3-attrs (21.4.0) [ 0 ][ DONE ] python3-cryptography (36.0.2) [ 1 ][ DONE ] libyajl (2.1.0) [ 0 ][ DONE ] qemu (7.0.0) [ 40 ][ DONE ] powertop (2.14) [ 0 ][ DONE ] faad2 (2_10_0) [ 1 ][ DONE ] sox (14.4.2) [ 0 ][ DONE ] transmission (3.00) [ 1 ][ DONE ] strace (5.17) [ 1 ][ DONE ] stress (1.0.5) [ 0 ][ DONE ] perl-MIME-Base64 (3.16) [ 0 ][ DONE ] wio (1.3.2) [ 0 ][ DONE ] frr (8.0.1) [ 4 ][ DONE ] lame (3.100) [ 0 ][ DONE ] tcpdump (4.99.1) [ 0 ][ DONE ] minicom (2.8) [ 1 ][ DONE ] python3-cffi (1.15.0) [ 0 ][ DONE ] nginx (1.21.6) [ 1 ][ DONE ] iptraf-ng (1.2.1) [ 0 ][ DONE ] bacula (9.6.7) [ 0 ][ DONE ] socat (1.7.4.2) [ 0 ][ DONE ] lshw (B.02.19.2) [ 1 ][ DONE ] foomatic (4.0.9) [ 16 ][ DONE ] traceroute (2.1.0) [ 0 ][ DONE ] cups (2.4.2) [ 7 ][ DONE ] perl-Net-SMTP-SSL (1.04) [ 0 ][ DONE ] perl-File-ReadBackwards (1.05) [ 0 ][ DONE ] ipvsadm (1.31) [ 1 ][ DONE ] python3-terminaltables (3.1.10) [ 0 ][ DONE ] elfutils (0.186) [ 1 ][ DONE ] observium-agent (18.9.1) [ 0 ][ DONE ] 7zip (17.04) [ 4 ][ DONE ] vdr_streamdev (0.6.1) [ 0 ][ DONE ] rpcbind (1.2.6) [ 0 ][ DONE ] mpc (0.34) [ 1 ][ DONE ] mdns-repeater (1.10) [ 0 ][ DONE ] python3-jmespath (1.0.0) [ 0 ][ DONE ] bwm-ng (0.6.1-f54b3fa) [ 0 ][ DONE ] ncat (7.91) [ 0 ][ DONE ] fping (5.0) [ 0 ][ DONE ] spandsp (0.0.6) [ 1 ][ DONE ] vdr (2.4.7) [ 1 ][ DONE ] ddrescue (1.25) [ 0 ][ DONE ] bird (2.0.9) [ 0 ][ DONE ] c-ares (1.17.1) [ 0 ][ DONE ] htop (3.2.1) [ 1 ][ DONE ] netsnmpd (5.9.1) [ 4 ][ DONE ] mc (4.8.28) [ 1 ][ DONE ] python3-arrow (1.2.2) [ 0 ][ DONE ] python3-requests (2.27.1) [ 0 ][ DONE ] python3-packaging (21.3) [ 0 ][ DONE ] libassuan (2.5.4) [ 0 ][ DONE ] tor (0.4.7.8) [ 9 ][ DONE ] wavemon (0.7.5) [ 0 ][ DONE ] libdaemon (0.14) [ 0 ][ DONE ] nagios_nrpe (4.1.0) [ 0 ][ DONE ] taglib (1.12) [ 1 ][ DONE ] libseccomp (2.5.4) [ 0 ][ DONE ] python3-semantic-version (2.9.0) [ 0 ][ DONE ] ncdu (1.17) [ 0 ][ DONE ] libusbredir (0.8.0) [ 0 ][ DONE ] perl-File-Tail (1.3) [ 0 ][ DONE ] dbus (1.14.0) [ 1 ][ DONE ] libpciaccess (0.16) [ 0 ][ DONE ] perl-TimeDate (2.33) [ 0 ][ DONE ] cifs-utils (6.14) [ 0 ][ DONE ] freeradius (3.0.23) [ 3 ][ DONE ] oci-cli (3.7.3) [ 6 ][ DONE ] python3-certifi (2021.10.8) [ 0 ][ DONE ] python3-click (8.1.2) [ 1 ][ DONE ] stunnel (5.63) [ 0 ][ DONE ] avahi (0.8) [ 0 ][ DONE ] xvid (1.3.7) [ 1 ][ DONE ] nmap (7.92) [ 10 ][ DONE ] libvorbis (1.3.7) [ 0 ][ DONE ] pcengines-apu-firmware (4.17.0.1) [ 0 ][ SKIP ] guardian (2.0.2) [ 1 ][ DONE ] python3-setuptools (62.0.0) [ 1 ][ DONE ] python3-sniffio (1.2.0) [ 0 ][ DONE ] libogg (1.3.5) [ 0 ][ DONE ] ghostscript (9.56.1) [ 14 ][ DONE ] mpfire [ 0 ][ DONE ] perl-Date-Calc (6.4) [ 0 ][ DONE ] lcdproc (0.5.9) [ 0 ][ DONE ] lynis (3.0.8) [ 0 ][ DONE ] cups-pdf (3.0.1) [ 0 ][ DONE ] flac (1.3.3) [ 1 ][ DONE ] perl-Net-IP (1.26) [ 0 ][ DONE ] apcupsd (3.14.14) [ 0 ][ DONE ] libmpeg2 (0.4.1) [ 0 ][ DONE ] perl-Date-Manip (6.86) [ 5 ][ DONE ] vdr_epgsearch (2.4.0+git20191101) [ 1 ][ DONE ] hostapd (2_10) [ 0 ][ DONE ] ebtables (2.0.10-4) [ 1 ][ DONE ] alac (0.0.7) [ 0 ][ DONE ] shairport-sync (3.3.8) [ 0 ][ DONE ] perl-inotify2 (1.22) [ 0 ][ DONE ] python3-trio (0.21.0) [ 1 ][ DONE ] minidlna (1.3.0) [ 0 ][ DONE ] libtirpc (1.3.1) [ 0 ][ DONE ] gnu-netcat (0.7.1) [ 0 ][ DONE ] gutenprint (5.3.4) [ 4 ][ DONE ] python3-pyfuse3 (3.2.1) [ 0 ][ FAIL ]
- make -f python3-trio LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//python3-trio' -> '/tmp/package-python3-trio/ROOTFILES' xz: Adjusted the number of threads from 4 to 3 to not exceed the memory usage limit of 2048 MiB Aug 5 15:38:40: Building minidlna minidlna-1.3.0.tar.gz checksum OK
- cd /usr/src/lfs
- make -f minidlna LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//minidlna' -> '/tmp/package-minidlna/ROOTFILES' xz: Adjusted the number of threads from 4 to 3 to not exceed the memory usage limit of 2048 MiB Aug 5 15:38:40: Building libtirpc libtirpc-1.3.1.tar.bz2 checksum OK
- cd /usr/src/lfs
- make -f libtirpc LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//libtirpc' -> '/tmp/package-libtirpc/ROOTFILES' xz: Adjusted the number of threads from 4 to 3 to not exceed the memory usage limit of 2048 MiB Aug 5 15:38:40: Building gnu-netcat netcat-0.7.1.tar.gz checksum OK
- cd /usr/src/lfs
- make -f gnu-netcat LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//gnu-netcat' -> '/tmp/package-gnu-netcat/ROOTFILES' xz: Adjusted the number of threads from 4 to 3 to not exceed the memory usage limit of 2048 MiB Aug 5 15:38:40: Building gutenprint gutenprint-5.3.4.tar.xz checksum OK
- cd /usr/src/lfs
- make -f gutenprint LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//gutenprint' -> '/tmp/package-gutenprint/ROOTFILES' xz: Adjusted the number of threads from 4 to 3 to not exceed the memory usage limit of 2048 MiB Aug 5 15:38:44: Building python3-pyfuse3 pyfuse3-3.2.1.tar.gz checksum OK
- cd /usr/src/lfs
- make -f python3-pyfuse3 LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages//python3-pyfuse3' -> '/tmp/package-python3-pyfuse3/ROOTFILES' tar: usr/lib/python3.10/site-packages/pyfuse3.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory tar: Exiting with failure status due to previous errors make: *** [python3-pyfuse3:61: dist] Error 2
ERROR: Packaging python3-pyfuse3 [ FAIL ] Check /build/nightly/next/log/_build.packages.log for errors if applicable[ FAIL ]
-- Sent from my laptop
-- Sent from my laptop