- IPFire-3.x - Update from version 2.8.2-2 to 2.9.2-1 - version 2.8.2-2 was failing to build. - Initially version 2.9.2-1 failed with the same error messages. /usr/lib/sssd/sss_analyze [INVALID-INTERPRETER] There was also the following two messages in the log "/usr/lib/sssd/sss_analyze: Found command python ((null)) /usr/lib/sssd/sss_analyze: Could not find path for command python" Based on the above error I checked sss_analyze and found the following first line "#!/usr/bin/env python" but the python program in IPFire is called python3 Added the sed line to change python to python3 and the build then was successful. - Changelog 2.9.2 Highlights SSSD 2.9 branch is now in long-term maintenance (LTM) phase. General information libkrb5-1.21 can now be used to build PAC plugin. sssctl cert-show and cert-show cert-eval-rule can now be run as non-root user. Important fixes SSSD does no longer crash if PIN is introduced but the tactile trigger isn’t pressed during passkey authentication. SSSD can now recover if memory-cache files under /var/lib/sss/mc where truncated while SSSD is running. Chaining of identical D-Bus requests that run in parallel to avoid multiple backend queries works again. Configuration changes New option local_auth_policy is added to control which offline authentication methods will be enabled by SSSD. This option is relevant for authentication methods which have online, and offline capability such as passkey, and smartcard authentication. The default value match sets the offline methods to their corresponding online value. This enables offline authentication when online kerberos pre-authentication such as PKINIT, or passkey is supported by the backend, note that online methods will still be attempted first. Option value only can be used to disable online authentication entirely, or the value enable:method to explicitly enable specific authentication methods, e.g. enable:passkey. Tickets Fixed #5198 - monatomically should have been monotonically #6733 - New covscan errors in ‘passkey’ code #6802 - sss_certmap_test fail in v2.9.1 on Arch Linux #6803 - [sssd] SSSD enters failed state after heavy load in the system #6889 - Crash in pam_passkey_auth_done #6911 - SBUS chaining is broken for getAccountInfo and other internal D-Bus calls 2.9.1 New features Passkey: added option to write key mapping data to file. Important fixes A regression was fixed that prevented autofs lookups to function correctly when cache_first is set to True. Since this was set as a new default value in sssd-2.9.0, it is considered as a regression. A regression where SSSD failed to properly watch for changes in ‘/etc/resolv.conf’ when it was a symbolic link or was a relative path, was fixed. Tickets Fixed #6442 - PAC errors when no PAC configured #6652 - IPA: previously cached netgroup member is not remove correctly after it is removed from ipa #6659 - sssd_be segfault at 0 ip 00007f16b5fcab7e sp 00007fffc1cc0988 error 4 in libc-2.28.so[7f16b5e72000+1bc000] #6718 - file_watch-tests fail in v2.9.0 on Arch Linux #6720 - [sssd] User lookup on IPA client fails with ‘s2n get_fqlist request failed’ #6739 - autofs mounts: Access to non-existent file very slow since 2.9.0 #6744 - sssd-be tends to run out of system resources, hitting the maximum number of open files #6766 - [RHEL8] sssd : AD user login problem when modify ldap_user_name= name and restricted by GPO Policy #6768 - [RHEL8] sssd attempts LDAP password modify extended op after BIND failure 2.9.0 General information sss_simpleifp library is deprecated and might be removed in further releases. Those who are interested to keep using it awhile should configure its build explicitly using --with-libsifp ./configure option. “Files provider” (i.e. id_provider = files) is deprecated and might be removed in further releases. Those who are interested to keep using it awhile should configure its build explicitly using --with-files-provider ./configure option. Or consider using “Proxy provider” with proxy_lib_name = files instead. Previously deprecated --enable-files-domain configure option, which was used to manage default value of the enable_files_domain config option, is now removed. Long time unused ‘–enable-all-experimental-features’ configure option was removed. SSSD will no longer warn about changed defaults when using ldap_schema = rfc2307 and default autofs mapping. This warning was introduced in 1.14 to loudly warn about different default values. New features New passkey functionality, which will allow the use of FIDO2 compliant devices to authenticate a centrally managed user locally. Moreover, in the case of a FreeIPA user, it can also issue a Kerberos ticket automatically with upcoming FreeIPA version 4.11. Add support for ldapi:// URLs to allow connections to local LDAP servers NSS IDMAP has two new methods: getsidbyusername and getsidbygroupname Note: support for passkey is in its initial phase and the authentication policy will be adjusted in future versions. Packaging changes for passkey Include passkey subpackage and dependency for libfido2. Configuration changes for passkey New options to enable and tune passkey behavior: pam_passkey_auth, ldap_user_passkey, passkey_verification, passkey_child_timeout, interactive, interactive_prompt, touch and touch_prompt. --with-passkey is a new configuration option to enable building passkey authentication. Important fixes A regression when running sss_cache when no SSSD domain is enabled would produce a syslog critical message was fixed. Configuration changes Default value of cache_first option was changed to true in case SSSD is built without files provider. ipa_access_order parameter introduced. It behaves much like ldap_access_order but affects IPA domains (id_provider = ipa) and accepts limited values. Please see sssd-ipa(5) for more information. Tickets Fixed #5390 - sssd failing to register dynamic DNS addresses against an AD server due to unnecessary DNS search #6383 - sssd is not waiting for network-online.target #6403 - Add new Active Directory related certificate mapping templates #6404 - [RFE] Add digest mapping feature from pam_pkcs11 in SSSD #6451 - UPN check cannot be disabled explicitly but requires krb5_validate = false’ as a work-around #6479 - Smart Card auth does not work with p11_uri (with-smartcard-required) #5080 - [RFE] - Show password expiration warning when IdM users login with SSH keys #5390 - sssd failing to register dynamic DNS addresses against an AD server due to unnecessary DNS search #6228 - Enable passkey authentication in a centralized environment #6324 - coredump occurs when I restart sssd-ifp.service with sssd.service is inactive #6357 - KCM erroneously changes primary cache when renewing credentials #6360 - [D-Bus] ListByName() returns several times the same entry #6361 - [D-Bus] ListByName() fails when not using wildcards #6383 - sssd is not waiting for network-online.target #6387 - Fatal errors in log during Anaconda installation: “CRIT sss_cache:No domains configured, fatal error!” #6398 - [D-Bus] Groups.ListByName() and Groups.ListByDomainAndName() not working #6403 - Add new Active Directory related certificate mapping templates #6404 - [RFE] Add digest mapping feature from pam_pkcs11 in SSSD #6451 - UPN check cannot be disabled explicitly but requires krb5_validate = false’ as a work-around #6465 - SBUS:A core dump occurs when dbus_server_get_address() #6477 - changing password with ldap_password_policy = shadow does not take effect immediately #6479 - Smart Card auth does not work with p11_uri (with-smartcard-required) #6487 - implicit declaration of function fgetpwent in test_negcache_2.c #6505 - SSS_CLIENT: general library destructor should cancel thread-at-exit destructors #6531 - FAST/OTP with Anonymous PKINIT - oddly requires a keytab to exist (can be a bogus keytab) #6544 - AD: Nested group processing can fail or return invalid members (security issue) #6548 - sssd-ipa #6551 - passkey_child cannot be used to register passkey due to too strict permissions #6558 - enabling passkey authentication breaks idp support #6565 - Improvement: sss_client: add ‘getsidbyusername()’ and ‘getsidbygroupname()’ and corresponding python bindings #6588 - Integration Tests：The sssd_hosts module is missing in release tarball #6592 - pid wrapping caused sss_cli_check_socket to close the file descriptor opened by the process #6600 - [sssd] Auth fails if client cannot speak to forest root domain (ldap_sasl_interactive_bind_s failed) #6610 - BUILD: Clear compilation alarms. #6612 - MIT Kerberos confusion over password expiry #6617 - filter_groups doesn’t filter GID from ‘id’ output: AD + ‘ldap_id_mapping = True’ corner case #6626 - Unable to lookup AD user from child domain (or “make filtering of the domains more configurable”) #6635 - sss allows extraneous @ characters prefixed to username
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- sssd/sssd.nm | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/sssd/sssd.nm b/sssd/sssd.nm index 90d804469..5f3a4ecd4 100644 --- a/sssd/sssd.nm +++ b/sssd/sssd.nm @@ -4,8 +4,8 @@ ###############################################################################
name = sssd -version = 2.8.2 -release = 2 +version = 2.9.2 +release = 1
groups = System/Tools url = https://github.com/SSSD/sssd @@ -95,6 +95,9 @@ build
# Drop /var/run rm -rvf %{BUILDROOT}%{localstatedir}/run + + # Change python to python3 in sss_analyze file + sed -i 's|#!/usr/bin/env python|#!/usr/bin/env python3|g' %{BUILDROOT}/usr/lib/sssd/sss_analyze end end