Reviewed-by: Peter Müller peter.mueller@ipfire.org
- Update from version 2.0.4 to 2.1.4
- Update of rootfile
- Changelog 2.1.4 ### Significant changes relative to 2.1.3
Visual Studio 2010. 2. The `tjDecompressHeader3()` function in the TurboJPEG C API and the `TJDecompressor.setSourceImage()` method in the TurboJPEG Java API now accept "abbreviated table specification" (AKA "tables-only") datastreams, which can be used to prime the decompressor with quantization and Huffman tables that can be used when decompressing subsequent "abbreviated image" datastreams. 3. libjpeg-turbo now performs run-time detection of AltiVec instructions on OS X/PowerPC systems if AltiVec instructions are not enabled at compile time. This allows both AltiVec-equipped (PowerPC G4 and G5) and non-AltiVec-equipped (PowerPC G3) CPUs to be supported using the same build of libjpeg-turbo. 4. Fixed an error ("Bogus virtual array access") that occurred when attempting to decompress a progressive JPEG image with a height less than or equal to one iMCU (8 * the vertical sampling factor) using buffered-image mode with interblock smoothing enabled. This was a regression introduced by 2.1 beta1[6(b)]. 5. Fixed two issues that prevented partial image decompression from working properly with buffered-image mode: - Attempting to call `jpeg_crop_scanline()` after `jpeg_start_decompress()` but before `jpeg_start_output()` resulted in an error ("Improper call to JPEG library in state 207".) - Attempting to use `jpeg_skip_scanlines()` resulted in an error ("Bogus virtual array access") under certain circumstances. 2.1.3 ### Significant changes relative to 2.1.2
- Fixed a regression introduced in 2.1.3 that caused build failures with
input files into full-color JPEG images unless the `-grayscale` option was used. 2. cjpeg now automatically compresses GIF and 8-bit BMP input files into grayscale JPEG images if the input files contain only shades of gray. 3. The build system now enables the intrinsics implementation of the AArch64 (Arm 64-bit) Neon SIMD extensions by default when using GCC 12 or later. 4. Fixed a segfault that occurred while decompressing a 4:2:0 JPEG image using the merged (non-fancy) upsampling algorithms (that is, with `cinfo.do_fancy_upsampling` set to `FALSE`) along with `jpeg_crop_scanline()`. Specifically, the segfault occurred if the number of bytes remaining in the output buffer was less than the number of bytes required to represent one uncropped scanline of the output image. For that reason, the issue could only be reproduced using the libjpeg API, not using djpeg. 2.1.2 ### Significant changes relative to 2.1.1
- Fixed a regression introduced by 2.0 beta1[7] whereby cjpeg compressed PGM
GAS implementations of AArch64 (Arm 64-bit) Neon SIMD functions (which are used by default with GCC for performance reasons) to be placed in the `.rodata` section rather than in the `.text` section. This caused the GNU linker to automatically place the `.rodata` section in an executable segment, which prevented libjpeg-turbo from working properly with other linkers and also represented a potential security risk. 2. Fixed an issue whereby the `tjTransform()` function incorrectly computed the MCU block size for 4:4:4 JPEG images with non-unary sampling factors and thus unduly rejected some cropping regions, even though those regions aligned with 8x8 MCU block boundaries. 3. Fixed a regression introduced by 2.1 beta1[13] that caused the build system to enable the Arm Neon SIMD extensions when targetting Armv6 and other legacy architectures that do not support Neon instructions. 4. libjpeg-turbo now performs run-time detection of AltiVec instructions on FreeBSD/PowerPC systems if AltiVec instructions are not enabled at compile time. This allows both AltiVec-equipped and non-AltiVec-equipped CPUs to be supported using the same build of libjpeg-turbo. 5. cjpeg now accepts a `-strict` argument similar to that of djpeg and jpegtran, which causes the compressor to abort if an LZW-compressed GIF input image contains incomplete or corrupt image data. 2.1.1 ### Significant changes relative to 2.1.0
- Fixed a regression introduced by 2.1 beta1[13] that caused the remaining
non-GCC-compatible compilers for Un*x/Arm platforms. 2. Fixed a regression introduced by 2.1 beta1[13] that prevented the Arm 32-bit (AArch32) Neon SIMD extensions from building unless the C compiler flags included `-mfloat-abi=softfp` or `-mfloat-abi=hard`. 3. Fixed an issue in the AArch32 Neon SIMD Huffman encoder whereby reliance on undefined C compiler behavior led to crashes ("SIGBUS: illegal alignment") on Android systems when running AArch32/Thumb builds of libjpeg-turbo built with recent versions of Clang. 4. Added a command-line argument (`-copy icc`) to jpegtran that causes it to copy only the ICC profile markers from the source file and discard any other metadata. 5. libjpeg-turbo should now build and run on CHERI-enabled architectures, which use capability pointers that are larger than the size of `size_t`. 6. Fixed a regression (CVE-2021-37972) introduced by 2.1 beta1[5] that caused a segfault in the 64-bit SSE2 Huffman encoder when attempting to losslessly transform a specially-crafted malformed JPEG image. 2.1.0 ### Significant changes relative to 2.1 beta1
- Fixed a regression introduced in 2.1.0 that caused build failures with
decompress certain progressive JPEG images with one or more component planes of width 8 or less caused a buffer overrun. 2. Fixed a regression introduced by 2.1 beta1[6(b)] whereby attempting to decompress a specially-crafted malformed progressive JPEG image caused the block smoothing algorithm to read from uninitialized memory. 3. Fixed an issue in the Arm Neon SIMD Huffman encoders that caused the encoders to generate incorrect results when using the Clang compiler with Visual Studio. 4. Fixed a floating point exception (CVE-2021-20205) that occurred when attempting to compress a specially-crafted malformed GIF image with a specified image width of 0 using cjpeg. 5. Fixed a regression introduced by 2.0 beta1[15] whereby attempting to generate a progressive JPEG image on an SSE2-capable CPU using a scan script containing one or more scans with lengths divisible by 32 and non-zero successive approximation low bit positions would, under certain circumstances, result in an error ("Missing Huffman code table entry") and an invalid JPEG image. 6. Introduced a new flag (`TJFLAG_LIMITSCANS` in the TurboJPEG C API and `TJ.FLAG_LIMIT_SCANS` in the TurboJPEG Java API) and a corresponding TJBench command-line argument (`-limitscans`) that causes the TurboJPEG decompression and transform functions/operations to return/throw an error if a progressive JPEG image contains an unreasonably large number of scans. This allows applications that use the TurboJPEG API to guard against an exploit of the progressive JPEG format described in the report ["Two Issues with the JPEG Standard"](https://libjpeg-turbo.org/pmwiki/uploads/About/TwoIssueswiththeJPEGStandard....). 7. The PPM reader now throws an error, rather than segfaulting (due to a buffer overrun) or generating incorrect pixels, if an application attempts to use the `tjLoadImage()` function to load a 16-bit binary PPM file (a binary PPM file with a maximum value greater than 255) into a grayscale image buffer or to load a 16-bit binary PGM file into an RGB image buffer. 8. Fixed an issue in the PPM reader that caused incorrect pixels to be generated when using the `tjLoadImage()` function to load a 16-bit binary PPM file into an extended RGB image buffer. 9. Fixed an issue whereby, if a JPEG buffer was automatically re-allocated by one of the TurboJPEG compression or transform functions and an error subsequently occurred during compression or transformation, the JPEG buffer pointer passed by the application was not updated when the function returned. 2.0.90 (2.1 beta1) ### Significant changes relative to 2.0.6:
- Fixed a regression introduced by 2.1 beta1[6(b)] whereby attempting to
support the x32 ABI on Linux, which allows for using x86-64 instructions with 32-bit pointers. The x32 ABI is generally enabled by adding `-mx32` to the compiler flags. Caveats: - CMake 3.9.0 or later is required in order for the build system to automatically detect an x32 build. - Java does not support the x32 ABI, and thus the TurboJPEG Java API will automatically be disabled with x32 builds. 2. Added Loongson MMI SIMD implementations of the RGB-to-grayscale, 4:2:2 fancy chroma upsampling, 4:2:2 and 4:2:0 merged chroma upsampling/color conversion, and fast integer DCT/IDCT algorithms. Relative to libjpeg-turbo 2.0.x, this speeds up: - the compression of RGB source images into grayscale JPEG images by approximately 20% - the decompression of 4:2:2 JPEG images by approximately 40-60% when using fancy upsampling - the decompression of 4:2:2 and 4:2:0 JPEG images by approximately 15-20% when using merged upsampling - the compression of RGB source images by approximately 30-45% when using the fast integer DCT - the decompression of JPEG images into RGB destination images by approximately 2x when using the fast integer IDCT The overall decompression speedup for RGB images is now approximately 2.3-3.7x (compared to 2-3.5x with libjpeg-turbo 2.0.x.) 3. 32-bit (Armv7 or Armv7s) iOS builds of libjpeg-turbo are no longer supported, and the libjpeg-turbo build system can no longer be used to package such builds. 32-bit iOS apps cannot run in iOS 11 and later, and the App Store no longer allows them. 4. 32-bit (i386) OS X/macOS builds of libjpeg-turbo are no longer supported, and the libjpeg-turbo build system can no longer be used to package such builds. 32-bit Mac applications cannot run in macOS 10.15 "Catalina" and later, and the App Store no longer allows them. 5. The SSE2 (x86 SIMD) and C Huffman encoding algorithms have been significantly optimized, resulting in a measured average overall compression speedup of 12-28% for 64-bit code and 22-52% for 32-bit code on various Intel and AMD CPUs, as well as a measured average overall compression speedup of 0-23% on platforms that do not have a SIMD-accelerated Huffman encoding implementation. 6. The block smoothing algorithm that is applied by default when decompressing progressive Huffman-encoded JPEG images has been improved in the following ways: - The algorithm is now more fault-tolerant. Previously, if a particular scan was incomplete, then the smoothing parameters for the incomplete scan would be applied to the entire output image, including the parts of the image that were generated by the prior (complete) scan. Visually, this had the effect of removing block smoothing from lower-frequency scans if they were followed by an incomplete higher-frequency scan. libjpeg-turbo now applies block smoothing parameters to each iMCU row based on which scan generated the pixels in that row, rather than always using the block smoothing parameters for the most recent scan. - When applying block smoothing to DC scans, a Gaussian-like kernel with a 5x5 window is used to reduce the "blocky" appearance. 7. Added SIMD acceleration for progressive Huffman encoding on Arm platforms. This speeds up the compression of full-color progressive JPEGs by about 30-40% on average (relative to libjpeg-turbo 2.0.x) when using modern Arm CPUs. 8. Added configure-time and run-time auto-detection of Loongson MMI SIMD instructions, so that the Loongson MMI SIMD extensions can be included in any MIPS64 libjpeg-turbo build. 9. Added fault tolerance features to djpeg and jpegtran, mainly to demonstrate methods by which applications can guard against the exploits of the JPEG format described in the report ["Two Issues with the JPEG Standard"](https://libjpeg-turbo.org/pmwiki/uploads/About/TwoIssueswiththeJPEGStandard....). - Both programs now accept a `-maxscans` argument, which can be used to limit the number of allowable scans in the input file. - Both programs now accept a `-strict` argument, which can be used to treat all warnings as fatal. 10. CMake package config files are now included for both the libjpeg and TurboJPEG API libraries. This facilitates using libjpeg-turbo with CMake's `find_package()` function. For example: find_package(libjpeg-turbo CONFIG REQUIRED) add_executable(libjpeg_program libjpeg_program.c) target_link_libraries(libjpeg_program PUBLIC libjpeg-turbo::jpeg) add_executable(libjpeg_program_static libjpeg_program.c) target_link_libraries(libjpeg_program_static PUBLIC libjpeg-turbo::jpeg-static) add_executable(turbojpeg_program turbojpeg_program.c) target_link_libraries(turbojpeg_program PUBLIC libjpeg-turbo::turbojpeg) add_executable(turbojpeg_program_static turbojpeg_program.c) target_link_libraries(turbojpeg_program_static PUBLIC libjpeg-turbo::turbojpeg-static) 11. Since the Unisys LZW patent has long expired, cjpeg and djpeg can now read/write both LZW-compressed and uncompressed GIF files (feature ported from jpeg-6a and jpeg-9d.) 12. jpegtran now includes the `-wipe` and `-drop` options from jpeg-9a and jpeg-9d, as well as the ability to expand the image size using the `-crop` option. Refer to jpegtran.1 or usage.txt for more details. 13. Added a complete intrinsics implementation of the Arm Neon SIMD extensions, thus providing SIMD acceleration on Arm platforms for all of the algorithms that are SIMD-accelerated on x86 platforms. This new implementation is significantly faster in some cases than the old GAS implementation-- depending on the algorithms used, the type of CPU core, and the compiler. GCC, as of this writing, does not provide a full or optimal set of Neon intrinsics, so for performance reasons, the default when building libjpeg-turbo with GCC is to continue using the GAS implementation of the following algorithms: - 32-bit RGB-to-YCbCr color conversion - 32-bit fast and accurate inverse DCT - 64-bit RGB-to-YCbCr and YCbCr-to-RGB color conversion - 64-bit accurate forward and inverse DCT - 64-bit Huffman encoding A new CMake variable (`NEON_INTRINSICS`) can be used to override this default. Since the new intrinsics implementation includes SIMD acceleration for merged upsampling/color conversion, 1.5.1[5] is no longer necessary and has been reverted. 14. The Arm Neon SIMD extensions can now be built using Visual Studio. 15. The build system can now be used to generate a universal x86-64 + Armv8 libjpeg-turbo SDK package for both iOS and macOS. 2.0.6 ### Significant changes relative to 2.0.5:
- The build system, x86-64 SIMD extensions, and accelerated Huffman codec now
platforms when using any of the YUV encoding/compression/decompression/decoding methods in the TurboJPEG Java API. 2. Fixed or worked around multiple issues with `jpeg_skip_scanlines()`: - Fixed segfaults or "Corrupt JPEG data: premature end of data segment" errors in `jpeg_skip_scanlines()` that occurred when decompressing 4:2:2 or 4:2:0 JPEG images using merged (non-fancy) upsampling/color conversion (that is, when setting `cinfo.do_fancy_upsampling` to `FALSE`.) 2.0.0[6] was a similar fix, but it did not cover all cases. - `jpeg_skip_scanlines()` now throws an error if two-pass color quantization is enabled. Two-pass color quantization never worked properly with `jpeg_skip_scanlines()`, and the issues could not readily be fixed. - Fixed an issue whereby `jpeg_skip_scanlines()` always returned 0 when skipping past the end of an image. 3. The Arm 64-bit (Armv8) Neon SIMD extensions can now be built using MinGW toolchains targetting Arm64 (AArch64) Windows binaries. 4. Fixed unexpected visual artifacts that occurred when using `jpeg_crop_scanline()` and interblock smoothing while decompressing only the DC scan of a progressive JPEG image. 5. Fixed an issue whereby libjpeg-turbo would not build if 12-bit-per-component JPEG support (`WITH_12BIT`) was enabled along with libjpeg v7 or libjpeg v8 API/ABI emulation (`WITH_JPEG7` or `WITH_JPEG8`.) 2.0.5 ### Significant changes relative to 2.0.4:
- Fixed "using JNI after critical get" errors that occurred on Android
in the libjpeg-turbo regression tests. Specifically, the `jsimd_h2v1_downsample_dspr2()` and `jsimd_h2v2_downsample_dspr2()` functions in the MIPS DSPr2 SIMD extensions are now disabled until/unless they can be fixed, and other functions that are incompatible with big endian MIPS CPUs are disabled when building libjpeg-turbo for such CPUs. 2. Fixed an oversight in the `TJCompressor.compress(int)` method in the TurboJPEG Java API that caused an error ("java.lang.IllegalStateException: No source image is associated with this instance") when attempting to use that method to compress a YUV image. 3. Fixed an issue (CVE-2020-13790) in the PPM reader that caused a buffer overrun in cjpeg, TJBench, or the `tjLoadImage()` function if one of the values in a binary PPM/PGM input file exceeded the maximum value defined in the file's header and that maximum value was less than 255. libjpeg-turbo 1.5.0 already included a similar fix for binary PPM/PGM files with maximum values greater than 255. 4. The TurboJPEG API library's global error handler, which is used in functions such as `tjBufSize()` and `tjLoadImage()` that do not require a TurboJPEG instance handle, is now thread-safe on platforms that support thread-local storage.
- Worked around issues in the MIPS DSPr2 SIMD extensions that caused failures
Signed-off-by: Adolf Belka adolf.belka@ipfire.org
config/rootfiles/common/libjpeg | 5 +++++ lfs/libjpeg | 6 +++--- 2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/config/rootfiles/common/libjpeg b/config/rootfiles/common/libjpeg index eb74d2c50..74c101854 100644 --- a/config/rootfiles/common/libjpeg +++ b/config/rootfiles/common/libjpeg @@ -9,6 +9,11 @@ #usr/include/jmorecfg.h #usr/include/jpeglib.h #usr/include/turbojpeg.h +#usr/lib/cmake/libjpeg-turbo +#usr/lib/cmake/libjpeg-turbo/libjpeg-turboConfig.cmake +#usr/lib/cmake/libjpeg-turbo/libjpeg-turboConfigVersion.cmake +#usr/lib/cmake/libjpeg-turbo/libjpeg-turboTargets-release.cmake +#usr/lib/cmake/libjpeg-turbo/libjpeg-turboTargets.cmake #usr/lib/libjpeg.so usr/lib/libjpeg.so.8 usr/lib/libjpeg.so.8.2.2 diff --git a/lfs/libjpeg b/lfs/libjpeg index 6808640a4..b9c9d3cd8 100644 --- a/lfs/libjpeg +++ b/lfs/libjpeg @@ -1,7 +1,7 @@ ############################################################################### # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2020 IPFire Team info@ipfire.org # +# Copyright (C) 2007-2022 IPFire Team info@ipfire.org # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@
include Config
-VER = 2.0.4 +VER = 2.1.4
THISAPP = libjpeg-turbo-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 9be870a5bafaae279646941b848b69fdf7c95ec08a686b01674f473ef33fe5923a04ba8a2d57df84384530308ca46fc3880a404c0eff769129417a553faed3bb +$(DL_FILE)_BLAKE2 = 80ffd77d58a37eae0bdc1868d994f34ea52c13e2624c720b1d0b6ec4d6d14b16911163ccd4009c8d6eda214f31e1fff78bb7eb4739ae6589d0fd8c7008c0e972
install : $(TARGET)