-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Actually, I have 10+ systems running on Soekris machines, i586 32 bit AMD Geode's. See http://soekris.com/products/net5501.html. These are not end of life; they are currently being marketed for vpn firewall/routers. I have some that have been running
I'm assuming they will not be able to be upgraded after a certain point?
That is sad, because these are very stable systems and run nicely with very little memory and extremely low power.
One of the offices I use it at has 50+ employees, 40+ Mbit data line, and some firewall rules built in, along with a site-to-site VPN and a couple or Road Warriors.
All of these systems have pakinfo running on them, so you should see them in the database. Fireinfo appears to show only 13% of the firewalls out there are 64 bit? Am I reading that wrong?
But, I do see where ARM is not happening.
Rod
On 09/08/2016 12:35 PM, Michael Tremer wrote:
Hi,
On Thu, 2016-09-08 at 16:30 +0000, IT Superhack wrote:
Hello Michael, hello development-list,
I have a question concerning the IDS2016 (URL: http://wiki.ipfire.org/ids/2016 /log), where it says: "Dropping i686 + armv5tel - No need for it any more"
Yeah, we didn't really log everything what we talked about. There was a little bit more than that and there is probably a little bit more detail to all of it than that.
But generally we didn't make as many decisions as we used to do since we have the monthly telephone conference.
To me, it has not become fully clear if this means the architecture or the whole release format. For example, nearly nobody (Fireinfo says: 0,07%) is running an IPFire system with the armv5tel architecture - these are afaik mostly old systems like the Raspberry Pi which are certainly not suitable for a firewall purpose.
So to give a little bit more detail:
The plan is to drop all 32 bit architectures as soon as possible. We do not see any point in supporting these any longer.
That starts with ARM where we never really got a number of users that is high enough to justify all the effort that is going into development of this.
And secondly x86: All hardware that is bought today or in the last ~5 years will support 64 bit. If it doesn't and if someone bought an other ALIX device that is just bad luck. These are too slow to run an IPFire system decently any ways and there is better alternatives on the market.
That is why we do not see any point whatsoever to continue supporting these architectures.
We will keep armv7hl for now because there is a some hardware around and our build system use it, but this will probably go away very soon when there is no usable hardware around soon.
On the other hand, > 80% run an i686 system, and I guess it wouldn't make sense to make these installations unusable because of EOL. But maybe "dropping" means that you will remove some specific patches for i686, so these will run with i586 afterwards.
No, this will scrap support for i686 entirely.
Within the ARM stuff, the situation is not that clear for me. Are you panning to remove the ARM support at all? Or are you going to remove ARMv5 devices from the "supported ARM devices list"?
We actually have done that in the past and we did not add any new hardware support in the last few years.
There is neither support nor any requests from the community for this.
Feel free to leave your comments on this. Would be happy to hear if someone can come up with at least one argument to continue 32 bit support. We couldn't find a single one.
Sorry if there is a misunderstanding here - got way little coffe today. ;-)
Best regards, Timmothy Wilson
Best, -Michael
- -- Rod Rodolico Daily Data, Inc. POB 140465 Dallas TX 75214-0465 214.827.2170 http://www.dailydata.net