Hi Michael,
i've tested the fix. It works. After that I've to delete the old configuration and create a new one.
Thank you. Thomas
Am 10.03.2013 14:09, schrieb Michael Tremer:
Hi Thomas,
I just fixed the default route problem in this commit: http://git.ipfire.org/?p=network.git;a=commitdiff;h=2741ce5581c3dc5d34942d0b...
Just check out the git repository on your box and run make install to get the fix. Maybe you will have to reconfigure some ports.
-Michael
On Sat, 2013-03-09 at 12:04 +0100, Thomas Ebert wrote:
A little problem here. Network settings are working and the network is autmatically configured static after a reboot. The default-route which i've set isn't working:
[root@ipfire3build ~]# network status upl0 Zone upl0 (bridge) Status UP MTU 1500
Statistics Received 4218 packets 196k (0 errors) Sent 220 packets 30k (0 errors) Spanning Tree Protocol information Version Spanning Tree Protocol ID 0200.000c29057a38 Priority 512 This bridge is root. Topology changing no Topology change time 0s Topology change count 0 Ports p0 FORWARDING - DSR: 00:0c:29:05:7a:38 - Cost: 100 Configurations ipv4-static UP IPv4 address 192.168.11.43/24 Gateway 192.168.11.5[root@ipfire3build ~]# ping www.google.de connect: Network is unreachable [root@ipfire3build ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.11.0 0.0.0.0 255.255.255.0 U 0 0 0 upl0 [root@ipfire3build ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master upl0 state UNKNOWN qlen 1000 link/ether 00:0c:29:05:7a:38 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe05:7a38/64 scope link valid_lft forever preferred_lft forever 3: upl0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:05:7a:38 brd ff:ff:ff:ff:ff:ff inet 192.168.11.43/24 scope global upl0 inet6 fe80::20c:29ff:fe05:7a38/64 scope link valid_lft forever preferred_lft forever
Regards
Am 09.03.2013 11:51, schrieb Thomas Ebert:
Finally, i wanna say thank you for the great support.
As you described, your method works now.
Best Regards Thomas
Am 09.03.2013 10:04, schrieb Stefan Schantl:
Hello Thomas,
thanks for your post on this list. Your described problem is a result of a miss-configured network.
It is only possible to create a lan0 or a upl0 network zone.
A lanX network zone is a local Ethernet, which doesn't have an a default route.
An uplX zone describes a network zone which has access to the next "bigger" network - In most cases this will be the Internet.
Best regards,
Stefan
I'm trying to configure my network with the network script, but it gives me errors.
[root@ipfire3build ~]# uname -a Linux ipfire3build 3.7.7-2.ip3.i686 #1 SMP Fri Feb 15 17:32:00 UTC 2013 i686 GNU/Linux
network zone create lan0/upl0 bridge network zone lan0/upl0 port add p0 network zone lan0/upl0 config create ipv4-static --address=192.168.11.43 --prefix=24 --gateway=192.168.11.5 network dns add 192.168.11.5 network start lan0/upl0 Job for network@lan0-upl0.service failed. See 'systemctl status network@lan0-upl0.service' and 'journalctl -xn' for details. Started service 'network@lan0/upl0.service', code=1. network status lan0/upl0
[root@ipfire3build ~]# network status lan0/upl0 Zone lan0/upl0 (bridge) Status DOWN
network@lan0-upl0.service - Network Connectivity for zone lan0/upl0 Loaded: loaded (/usr/lib/systemd/system/network@.service; static) Active: failed (Result: exit-code) since Fri, 2013-03-08 22:23:34 CET; 21s ago Process: 597 ExecStart=/usr/sbin/network zone %I up (code=exited, status=128) CGroup: name=systemd:/system/network@.service/lan0-upl0
Mar 08 22:23:34 ipfire3build network[597]: [81B blob data] Mar 08 22:23:34 ipfire3build network[678]: bridge: error_log: 'hook_exec' called from /usr/lib/network/functions.hook:127 Mar 08 22:23:34 ipfire3build network[597]: [81B blob data] Mar 08 22:23:34 ipfire3build network[680]: bridge: error_log: 'hook_zone_exec' called from /usr/lib/network/functions.zone:221 Mar 08 22:23:34 ipfire3build network[597]: [67B blob data] Mar 08 22:23:34 ipfire3build network[597]: [68B blob data] Mar 08 22:23:34 ipfire3build network[597]: [47B blob data] Mar 08 22:23:34 ipfire3build systemd[1]: network@lan0-upl0.service: main process exited, code=exited, status=128/n/a Mar 08 22:23:34 ipfire3build systemd[1]: Failed to start Network Connectivity for zone lan0/upl0. Mar 08 22:23:34 ipfire3build systemd[1]: Unit network@lan0-upl0.service entered failed state
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development