- removal of lfs, rootfile and config files - backup includes file is also removed, althouigh it was an empty file, so not backing anything up.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/backup/includes/lcdproc | 0 config/lcdproc/LCDd.conf | 1189 ----------------------------- config/lcdproc/lcdproc.conf | 129 ---- config/rootfiles/packages/lcdproc | 69 -- lfs/lcdproc | 113 --- make.sh | 1 - src/initscripts/packages/lcdproc | 76 -- 7 files changed, 1577 deletions(-) delete mode 100644 config/backup/includes/lcdproc delete mode 100644 config/lcdproc/LCDd.conf delete mode 100644 config/lcdproc/lcdproc.conf delete mode 100644 config/rootfiles/packages/lcdproc delete mode 100644 lfs/lcdproc delete mode 100644 src/initscripts/packages/lcdproc
diff --git a/config/backup/includes/lcdproc b/config/backup/includes/lcdproc deleted file mode 100644 index e69de29bb..000000000 diff --git a/config/lcdproc/LCDd.conf b/config/lcdproc/LCDd.conf deleted file mode 100644 index 8c418f424..000000000 --- a/config/lcdproc/LCDd.conf +++ /dev/null @@ -1,1189 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving a File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, -# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, imonlcd, -# IOWarrior, irman, joy, lb216, lcdm001, lcterm, lirc, lis, MD8800, -# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, picolcd, -# pyramid, sed1330, sed1520, serialPOS, serialVFD, shuttleVFD, sli, -# stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=CFontz - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? [default: no; legal: yes, no] -#ReportToSyslog=yes - -# User to run as. LCDd will drop its root privileges, if any, -# and run as this user instead. -User=root - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Hello message: each entry represents a display line; default: builtin -#Hello=" Welcome to" -#Hello=" LCDproc!" - -# GoodBye message: each entry represents a display line; default: builtin -#GoodBye="Thanks for using" -#GoodBye=" LCDproc!" - -# Sets the default time in seconds to displays a screen. -WaitTime=10 - -# If set to no, LCDd will start with screen rotation disabled. This has the -# same effect as if the ToggleRotateKey had been pressed. Rotation will start -# if the ToggleRotateKey is pressed. Note that this setting does not turn off -# priority sorting of screens. [default: on; legal: on, off] -#AutoRotate=no - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. The special value 'blank' is similar to no, but only a blank screen -# is displayed. [default: on; legal: on, off, blank] -#ServerScreen=no - -# Set master backlight setting. If set to 'open' a client may control the -# backlight for its own screens (only). [default: open; legal: off, open, on] -#Backlight=open - -# Set master heartbeat setting. If set to 'open' a client may control the -# heartbeat for its own screens (only). [default: open; legal: off, open, on] -#Heartbeat=open - -# set title scrolling speed [default: 10; legal: 0-10] -#TitleSpeed=10 - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. The ToggleRotateKey stops rotation of screens, while -# the PrevScreenKey and NextScreenKey go back / forward one screen (even if -# rotation is disabled. -# Assign the key string returned by the driver to the ...Key setting. These -# are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# Up to six keys are supported. The MenuKey (to enter and exit the menu), the -# EnterKey (to select values) and at least one movement keys are required. -# These are the default key assignments: -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -#LeftKey=Left -#RightKey=Right - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=560 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=800 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=800 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, -# 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=yes -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] -# Note: Use of this driver is deprecated, please use CFontzPacket driver -# with Model=633 instead. - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 533, 631, 633, 635] -Model=633 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - -# Reinitialize the LCD's BIOS on driver start. [default: no; legal: yes, no] -Reboot=yes - -# Enable the USB flag if the device is connected to an USB port. For -# serial ports leave it disabled. [default: no; legal: yes, no] -#USB=yes - -# Very old 633 firmware versions do not support partial screen updates using -# 'Send Data to LCD' command (31). For those devices it may be necessary to -# enable this flag. [default: no; legal: yes, no] -#OldFirmware=yes - -# Override the LCD size known for the selected model. Usually setting this -# value should not be necessary. -#Size=20x4 - -# Override the default communication speed known for the selected model. -# Default value depends on model [legal: 19200, 115200] -#Speed=115200 - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal: yes, no] -UseACS=no - -# draw Border [default: yes; legal: yes, no] -DrawBorder=yes - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 12832, 1602] -Model=12232 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size. Default depends on model: -# 12232: 20x4 -# 12832: 21x4 -# 1602: 16x2 -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits one to test keypad assignment -# Default value is no -#keypad_test_mode=yes - - - -## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## -[ea65] - -# Device is fixed /dev/ttyS1 -# Width and Height are fixed 9x1 - -# As the VFD is self luminescent we don't have a backlight -# But we can use the backlight functions to control the front LEDs -# Brightness 0 to 299 -> LEDs off -# Brightness 300 to 699 -> LEDs half bright -# Brightness 700 to 1000 -> LEDs full bright -Brightness=500 -# OffBrightness is the the value used for the 'backlight off' state -OffBrightness=0 - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - - - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=t6963c - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in -# libglcdprocdriver and its dependants) -UseFT2=no - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolution -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -#FontFile=/usr/share/fonts/corefonts/courbd.ttf - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minimum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border within the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual value are: 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface [default: /dev/lcd] -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# Set the initial contrast (bwctusb and lcd2usb) [default: 500; legal: 0 - 1000] -Contrast=0 - -# Set brightness of the backlight (lcd2usb only) [default: 0; legal: 0 - 1000] -#Brightness=1000 -#OffBrightness=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable (yes) or it controls an -# underline effect (no). [default: yes; legal: yes, no] -#Lastline=yes - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -#ExtendedMode=yes - -# In extended mode, on some controllers like the ST7036 (in 3 line mode) -# the next line in DDRAM won't start 0x20 higher. [default: 0x20] -#LineAddress=0x10 - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073, -# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 ] -# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5 and upd16314 are possible if -# compiled with additional charmaps) -CharMap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# Some displays (e.g. vdr-wakeup) need a message from the driver to that it -# is still alive. When set to a value bigger then null the character in the -# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0. -#KeepAliveDisplay=0 - -# If you experience occasional garbage on your display you can use this -# option as workaround. If set to a value bigger than null it forces a -# full screen refresh <RefreshDiplay> seconds. Default: 0. -#RefreshDisplay=5 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number. Must be exactly as listed by usbview -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -#ExtendedMode=yes - -# Specifies if the last line is pixel addressable (yes) or it controls an -# underline effect (no). [default: yes; legal: yes, no] -#Lastline=yes - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - -# Character map to to map ISO-8859-1 to the displays character set. -# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r, -# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r, -# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional -# charmaps) -CharMap=hd44780_euro - -## Soundgraph iMON LCD ## -[imonlcd] -# Specify which iMon protocol should be used -# [legal: 0, 1; default: 0] -# Choose 0 for 15c2:ffdc device, -# Choose 1 for 15c2:0038 device -Protocol=0 - -# Set the exit behavior [legal: 0-2; default: 1] -# 0 means leave shutdown message, -# 1 means show the big clock, -# 2 means blank device -#OnExit=2 - -# Select the output device to use [default: /dev/lcd0] -Device=/dev/lcd0 - -# Select the displays contrast [default: 200; legal: 0-1000] -Contrast=200 - -# Specify the size of the display in pixels [default: 96x16] -#Size=96x16 - -# Set the backlight state [default: on; legal: on, off] -#Backlight=on - -# Set the disc mode [legal: 0,1; default: 0] -# 0 => spin the "slim" disc - two disc segments, -# 1 => their complement spinning; -#DiscMode=0 - - - -## IrMan driver ## -[IrMan] -# in case of trouble with IrMan, try the Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## IRtrans driver ## -[irtrans] - -# Does the device have a backlight? [default: no; legal: yes, no] -#Backlight=no - -# IRTrans device to connect to [default: localhost] -#Hostname=localhost - -# display dimensions -Size=16x2 - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at server/drivers/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -## LIS MCE 2005 driver ## -[lis] - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100% -#Brightness=1000 - -# Columns by lines [default: 20x2] -#Size=20x2 - -# USB Vendor ID [default: 0x0403] -# Change only if testing a compatible device. -#VendorID=0x0403 - -# USB Product ID [default: 0x6001] -# Change only if testing a compatible device. -#ProductID=0x6001 - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## Futuba MDM166A Display -[mdm166a] -# Show self-running clock after LCDd shutdown -# Possible values: [default: no; legal: no, small, big] -Clock=big -# Dim display, no dimming gives full brightness [default: no, legal: yes, no] -Dimming=no -# Dim display in case LCDd is inactive [default: no, legal: yes, no] -OffDimming=yes - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=480 - -# Some old displays do not have an adjustable backlight but only can -# switch the backlight on/off. If you experience randomly appearing block -# characters, try setting this to false. [default: yes; legal: yes, no] -hasAdjustableBacklight=no - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# The following table translates from MtxOrb key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## mx5000 driver for LCD display on the Logitech MX5000 keyboard ## -[mx5000] - -# Select the output device to use [default: /dev/hiddev0] -Device = /dev/hiddev0 -# Time to wait in ms after the refresh screen has been sent [default: 1000] -WaitAfterRefresh = 1000 - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 -# [default: /dev/lcd] -Device=/dev/ttyS0 -# Specifies the size of the LCD. -Size=20x4 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 -# Set serial data parity [default: 0; legal: 0-2 ] -# Meaning: 0(=none), 1(=odd), 2(=even) -Parity=0 -# re-initialize the VFD [default: no; legal: yes, no] -Reboot=no - - - -## Mini-box.com picoLCD (usblcd) driver ## -[picolcd] - -# KeyTimeout is the time in ms that LCDd spends waiting for a key press before -# cycling through other duties. Higher values make LCDd use less CPU time and -# make key presses more detectable. Lower values make LCDd more responsive -# but a little prone to missing key presses. 500 (.5 second) is the default -# and a balanced value. [default: 500; legal: 0 - 1000] -KeyTimeout=500 - -# Sets the initial state of the backlight upon start-up. -# [default: on; legal: on, off] -#Backlight=on - -# Set the initial brightness [default: 1000; legal: 0 - 1000]. Works only -# with the 20x4 device -Brightness=1000 - -# Set the brightness while the backlight is 'off' [default: 0; legal: 0 - 1000]. -# Works only with the 20x4 device. -#OffBrightness=0 - -# Set the initial contrast [default: 1000; legal: 0 - 1000] -Contrast=1000 - -# Light the keys? [default: on; legal: on, off] -Keylights=on - -# If Keylights is on, the you can unlight specific keys below: -# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. -# There is no LED for the +/- keys. This is a handy way to indicate to users -# which keys are disabled. [default: on; legal: on, off] -Key0Light=on -Key1Light=on -Key2Light=on -Key3Light=on -Key4Light=on -Key5Light=on - -# Host name or IP address of the LIRC instance that is to receive IR codes -# If not set, or set to an empty value, IR support is disabled. -#LircHost=127.0.0.1 - -# UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535] -LircPort=8765 - -# Threshold in jiffies of synthesized gap that triggers flushing the IR data -# to lirc [default: 100 ; max: 32767 ] -# 100 means 6.1ms. legal: 16 - 32767; Use 0 to disable. -LircFlushThreshold=100 - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) -# Note: Currently only tested with G321D & SP14Q002. -Type=G321D - -# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] -CellSize=6x10 - -# Select what type of connection [legal: classic, bitshaker; default: classic] -ConnectionType=classic - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Select the interface type (wiring) for the display. Supported values are -# 68 for 68-style connection (RESET level high) and 80 for 80-style connection -# (RESET level low). [legal: 68, 80; default: 80] -InterfaceType=68 - -# On fast machines it may be necessary to slow down transfer to the display. -# If this value is set to zero, delay is disabled. Any value greater than -# zero slows down each write by one microsecond. [legal: 0-1000; default: 1] -DelayMult=0 - - -## serial POS display driver ## -[serialPOS] - -# Device to use in serial mode [default: /dev/lcd] -Device=/dev/lcd - -# Specifies the size of the display in characters. [default: 16x2] -Size=16x2 - -# Set the communication protocol to use with the POS display. -# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] -Type=AEDEX - -# communication baud rate with the display [default: 9600; legal: 1200, 2400, -# 19200, 115200] -Speed=9600 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# 4 IEE S03601-95B -# 5 IEE S03601-96-080 (*) -# 6 Futaba NA202SD08FA (allmost IEE compatible) -# 7 Samsung 20S207DA4 and 20S207DA6 -# 8 Nixdorf BA6x / VT100 -# (* most should work, not tested yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no] -# I.e. serial by default -use_parallel=no - -# Number of Custom-Characters. default is display type dependent -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallel mode only. Usual values are -# 0x278, 0x378 and 0x3BC. -Port=0x378 - -# Set parallel port timing delay (us). Used in parallel mode only. -# [default: 2; legal: 0 - 255] -#PortWait=2 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## shuttleVFD driver ## -[shuttleVFD] -# No options - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - -[SureElec] - -# Port the device is connected to (by default first USB serial port) -Device=/dev/ttyUSB0 - -# Edition level of the device (can be 1, 2 or 3) [default: 2] -#Edition=1 - -# set display size -# Note: The size can be obtained directly from device for edition 2 & 3. -#Size=16x2 - -# Set the initial contrast [default: 480; legal: 0 - 1000] -#Contrast=200 - -# Set the initial brightness [default: 480; legal: 1 - 1000] -#Brightness=480 - -# Set the initial off-brightness [default: 100; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -#OffBrightness=100 - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256 ] -# legal values are supported svgalib modes -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size in pixels [default: 128x64] -Size=240x128 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Use LPT port in bi-directional mode. This should work on most LPT port and -# is required for proper timing! [default: yes; legal: yes, no] -bidirectional=yes - -# Insert additional delays into reads / writes. [default: no; legal: yes, no] -#delayBus=no - -# Clear graphic memory on start-up. [default: no; legal: yes, no] -ClearGraphic=yes - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, -# 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# Offset in pixels from the top-left corner of the monitor [default: 0x0] -Offset=200x200 - -# X font to use, in XLFD format, as given by "xfontsel" -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/config/lcdproc/lcdproc.conf b/config/lcdproc/lcdproc.conf deleted file mode 100644 index 807238cff..000000000 --- a/config/lcdproc/lcdproc.conf +++ /dev/null @@ -1,129 +0,0 @@ -# LCDproc client configuration file - -## general options ## -[lcdproc] -# address of the LCDd server to connect to -Server=localhost - -# Port of the server to connect to -Port=13666 - -# set reporting level -ReportLevel=2 - -# report to to syslog ? -ReportToSyslog=false - -# run in foreground [default: false; legal: true, false] -#Foreground=true - -# PidFile location when running as daemon [default: /var/run/lcdproc.pid] -#PidFile=/var/run/lcdproc.pid - -# slow down initial announcement of modes (in 1/100s) -#delay=2 - -# display name for the main menu [default: LCDproc HOST] -#DisplayName=lcdproc - -## screen specific configuration options ## - -[CPU] -# Show screen -Active=True -OnTime=1 -OffTime=2 -ShowInvisible=false - -[Iface] -# Show screen -Active=True - -# Show stats for Interface0 -Interface0=green0 -# Interface alias name to display [default: <interface name>] -Alias0=LAN - -# Show stats for Interface1 -Interface1=red0 -Alias1=WAN - -# Show stats for Interface2 -Interface2=blue0 -Alias2=WIFI - -# for more than 3 interfaces change MAX_INTERFACES in iface.h and rebuild - -# Units to display [default: byte; legal: byte, bit, packet] -unit=bit - -# add screen with transferred traffic -#transfer=TRUE - -[Memory] -# Show screen -Active=True - -[Load] -# Show screen -Active=True -# Min Load Avg at which the backlight will be turned off [default: 0.05] -LowLoad=0.00 -# Max Load Avg at which the backlight will start blinking [default: 1.3] -HighLoad=2.5 - -[TimeDate] -# Show screen -Active=True -# time format [default: %H:%M:%S; legal: see strftime(3)] -TimeFormat="%H:%M:%S" -# date format [default: %x; legal: see strftime(3)] -DateFormat="%x" - -[About] -# Show screen -Active=false - -[SMP-CPU] -# Show screen -Active=false - -[OldTime] -# Show screen -Active=false -# time format [default: %H:%M:%S; legal: see strftime(3)] -TimeFormat="%H:%M:%S" -# date format [default: %x; legal: see strftime(3)] -DateFormat="%x" - -[BigClock] -# Show screen -Active=false - -[Uptime] -# Show screen -Active=false - -[Battery] -# Show screen -Active=false - -[CPUGraph] -# Show screen -Active=false - -[ProcSize] -# Show screen -Active=false - -[Disk] -# Show screen -Active=false - -[MiniClock] -# Show screen -Active=True -# time format [default: %H:%M; legal: see strftime(3)] -TimeFormat="%H:%M" - -# EOF diff --git a/config/rootfiles/packages/lcdproc b/config/rootfiles/packages/lcdproc deleted file mode 100644 index 092533c72..000000000 --- a/config/rootfiles/packages/lcdproc +++ /dev/null @@ -1,69 +0,0 @@ -#etc/lcdproc -etc/lcdproc/LCDd.conf -etc/lcdproc/lcdexec.conf -etc/lcdproc/lcdproc.conf -etc/lcdproc/lcdvc.conf -etc/rc.d/init.d/lcdproc -etc/rc.d/rc0.d/K40lcdproc -etc/rc.d/rc3.d/S60lcdproc -etc/rc.d/rc6.d/K40lcdproc -usr/bin/fortune.pl -usr/bin/iosock.pl -usr/bin/lcdexec -usr/bin/lcdident.pl -usr/bin/lcdmetar.pl -usr/bin/lcdproc -usr/bin/lcdvc -usr/bin/tail.pl -usr/bin/x11amp.pl -usr/lib/lcdproc -#usr/lib/lcdproc/CFontz.so -#usr/lib/lcdproc/CFontzPacket.so -#usr/lib/lcdproc/CwLnx.so -#usr/lib/lcdproc/EyeboxOne.so -#usr/lib/lcdproc/MD8800.so -#usr/lib/lcdproc/MtxOrb.so -#usr/lib/lcdproc/NoritakeVFD.so -#usr/lib/lcdproc/Olimex_MOD_LCD1x9.so -#usr/lib/lcdproc/SureElec.so -#usr/lib/lcdproc/bayrad.so -#usr/lib/lcdproc/curses.so -#usr/lib/lcdproc/ea65.so -#usr/lib/lcdproc/futaba.so -#usr/lib/lcdproc/glcd.so -#usr/lib/lcdproc/glk.so -#usr/lib/lcdproc/hd44780.so -#usr/lib/lcdproc/icp_a106.so -#usr/lib/lcdproc/imon.so -#usr/lib/lcdproc/imonlcd.so -#usr/lib/lcdproc/irtrans.so -#usr/lib/lcdproc/joy.so -#usr/lib/lcdproc/jw002.so -#usr/lib/lcdproc/lb216.so -#usr/lib/lcdproc/lcdm001.so -#usr/lib/lcdproc/lcterm.so -#usr/lib/lcdproc/linux_input.so -#usr/lib/lcdproc/ms6931.so -#usr/lib/lcdproc/mtc_s16209x.so -#usr/lib/lcdproc/picolcd.so -#usr/lib/lcdproc/pyramid.so -#usr/lib/lcdproc/rawserial.so -#usr/lib/lcdproc/sdeclcd.so -#usr/lib/lcdproc/sed1330.so -#usr/lib/lcdproc/sed1520.so -#usr/lib/lcdproc/serialPOS.so -#usr/lib/lcdproc/serialVFD.so -#usr/lib/lcdproc/sli.so -#usr/lib/lcdproc/stv5730.so -#usr/lib/lcdproc/t6963.so -#usr/lib/lcdproc/text.so -#usr/lib/lcdproc/tyan.so -#usr/lib/lcdproc/vlsys_m428.so -#usr/lib/lcdproc/yard2LCD.so -usr/sbin/LCDd -#usr/share/man/man1/lcdexec.1 -#usr/share/man/man1/lcdproc.1 -#usr/share/man/man1/lcdvc.1 -#usr/share/man/man5/lcdproc-config.5 -#usr/share/man/man8/LCDd.8 -var/ipfire/backup/addons/includes/lcdproc diff --git a/lfs/lcdproc b/lfs/lcdproc deleted file mode 100644 index f15440bd8..000000000 --- a/lfs/lcdproc +++ /dev/null @@ -1,113 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2022 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -SUMMARY = Daemon capable of showing info on LCD displays - -VER = 0e2ce9b - -THISAPP = lcdproc-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) -PROG = lcdproc -PAK_VER = 5 - -DEPS = - -SERVICES = lcdproc - -CFLAGS += -fcommon -Wno-error=implicit-function-declaration - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_BLAKE2 = e35471d3f77eeeaa90a87881a85163e8f551de1f198ce8d3821da15bdc3489149b0a6a5d40c7ad4412d50204d5009c7863613d80851f67bb28933c5bdb603fe4 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -b2 : $(subst %,%_BLAKE2,$(objects)) - -dist: - $(PAK) - -############################################################################### -# Downloading, checking, b2sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_BLAKE2,$(objects)) : - @$(B2SUM) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - $(UPDATE_AUTOMAKE) - cd $(DIR_APP) && ./autogen.sh - cd $(DIR_APP) && \ - ./configure \ - --prefix=/usr \ - --sysconfdir=/etc/lcdproc \ - --enable-libusb \ - --enable-libusb-1-0 \ - --enable-drivers=all \ - --enable-lcdproc-menus \ - --enable-stat-nfs \ - --enable-stat-smbfs \ - --with-lcdport=13666 - cd $(DIR_APP) && make $(MAKETUNING) - cd $(DIR_APP) && make install - -mkdir -pv /etc/lcdproc - cp -vf $(DIR_SRC)/config/lcdproc/{LCDd,lcdproc}.conf /etc/lcdproc - - #install initscripts - $(call INSTALL_INITSCRIPTS,$(SERVICES)) - - ln -sf ../init.d/lcdproc /etc/rc.d/rc3.d/S60lcdproc - ln -sf ../init.d/lcdproc /etc/rc.d/rc0.d/K40lcdproc - ln -sf ../init.d/lcdproc /etc/rc.d/rc6.d/K40lcdproc - install -v -m 644 $(DIR_SRC)/config/backup/includes/lcdproc \ - /var/ipfire/backup/addons/includes/lcdproc - @rm -rf $(DIR_APP) - @$(POSTBUILD) diff --git a/make.sh b/make.sh index 8e980f392..8f3674c9d 100755 --- a/make.sh +++ b/make.sh @@ -1999,7 +1999,6 @@ build_system() { lfsmake2 strace lfsmake2 ltrace lfsmake2 ipfire-netboot - lfsmake2 lcdproc lfsmake2 keepalived lfsmake2 ipvsadm lfsmake2 perl-Carp-Clan diff --git a/src/initscripts/packages/lcdproc b/src/initscripts/packages/lcdproc deleted file mode 100644 index 179214bac..000000000 --- a/src/initscripts/packages/lcdproc +++ /dev/null @@ -1,76 +0,0 @@ -#!/bin/sh -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2022 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -. /etc/sysconfig/rc -. ${rc_functions} - -CLIENT="lcdproc" - -CONFIG_FILE="/etc/sysconfig/lcdproc" - -# Read the configuration file if any. -[ -e "${CONFIG_FILE}" ] && . ${CONFIG_FILE} - -case "${1}" in - start) - boot_mesg "Starting LCDd..." - loadproc /usr/sbin/LCDd -c /etc/lcdproc/LCDd.conf 2>/dev/null - - case "${CLIENT}" in - lcdproc) - boot_mesg "Starting lcdproc..." - loadproc /usr/bin/lcdproc -c /etc/lcdproc/lcdproc.conf 2>/dev/null - ;; - vc) - boot_mesg "Starting LCD virtual console..." - loadproc /usr/bin/lcdvc -c /etc/lcdproc/lcdvc.conf 2>/dev/null - ;; - esac - ;; - - stop) - boot_mesg "Stopping LCDd..." - killproc /usr/sbin/LCDd - - boot_mesg "Stopping lcdproc..." - killproc /usr/bin/lcdproc - - boot_mesg "Stopping LCD virtual console..." - killproc /usr/bin/lcdvc - ;; - - restart) - ${0} stop - sleep 1 - ${0} start - ;; - - status) - statusproc /usr/sbin/LCDd - statusproc /usr/bin/lcdproc - statusproc /usr/bin/lcdvc - ;; - - *) - echo "Usage: ${0} {start|stop|restart|status}" - exit 1 - ;; -esac