Hi Michael
Michael Tremer schreef op zo 20-02-2022 om 18:10 [+0000]:
The reason why pakfire is doing this is because it is simply a wrapper around tar. It is not that sophisticated of a package management system because it wasn’t designed for this scale.
In order to avoid overwriting any existing configuration, we backup everything, extract the new package which will then overwrite the existing configuration files and then restore the backup to have the old configuration again. We could have built something that avoids overwriting the files in the first place which is what pakfire in IPFire 3 does.
The current method indeed is probably the best possible considering the way pakfire currently works when updating an addon. But for as far as I currently understand it, when you uninstall an addon, all config files are backed up and then are removed (due to being in the rootfile). For the user the addon is gone on the system. If the user opts to install the addon again, say about half a year or a year later, the install will restore the backup of the config it took during uninstall half a year ago. I think this will cause confusion in many cases? Is this implemented this way for a good reason? or just to accommodate the update procedure without much further thought?
I myself (if I didn't know how pakfire worked internally) would expect that if I uninstalled an addon, checked and removed potentially left- over config files, that a new install would give me a fresh install which I would have to configure manually again.
If pakfire worked that way, the user could make a copy of his config himself, uninstall and re-install an addon to have a fresh config which he then could merge himself with his old config-copy to make the addon work again.
So if there is no real reason to always backup on uninstall I would like to propose to perform the backup restore in the actual update- script instead of in the install and uninstall scripts? This way there is a quite logical way for the average user to start over with a fresh install of an addon. That would feel much more 'natural' to me.
Anyway this discussion about pakfire working is maybe worth its own thread as it is not really zabbix-agent specific.
Lots of other distributions work in a similar way where they rename the existing configuration files and might rename them back again.
The problem I'm having with the current way is that when an addon is updated, a new version of the config is just discarded due to the restore of the previous config during install (even if that config was never changed by the user). So if settings in the config are added, deprecated or even no longer valid, the user will never know until a version would no longer start up or no longer behave as expected due to the old config. And even if a user would think about checking config changes on an update he would have to go search the internet for a config example for this version of the addon.
Yes, this is a huge problem for us all. The question there is to answer is:
Do we know better than the user?
Answering that with a yes means that we would make decisions on their behalf and that might potentially go wrong. Answering that with a no means that the user needs to invest a lot of time into the configuration of each part of the distribution and the reason why we have a nice shiny web user interface is that they don’t have to do this. The correct answer is probably somewhere in the middle.
What we do in practise is: We keep systems consistent with their previous behaviour. An update should never change that (there are of course exceptions to every rule). New features might only be activated on new systems.
The problem I see with this is that if software provided by an addon is for example deprecating one or more config-options. Keeping the systems constistent would mean - not providing any newer version for that addon anymore, which I don't think is what we want. Or - trying to 'convert' the possibly user-changed deprecated config- setting in the config file using sed, which I can see failing in may ways :-) Or - providing the user with a straight forward way to reinstall an addon completely afresh, and/or - what I'm trying to do here, provide the user with the new config in some easily accessible way (currently .ipfirenew, but could be a simpler .example, see below), keeping his old config active possibly making the new addon version fail to work, but giving him the possibility to manually merge his deprecated config to what the current version of the addon-software expects.
In this specific case, as we update from a rather old version of zabbix agent, there are quite a few interesting config changes that can harden the security of the agent, which I would not want the user to miss out on. Also one option is deprecated, is currently still supported, but in the next version it probably will no longer work, possibly breaking some users' monitoring or causing the agent to fail starting.
Is this an add-on that generally requires configuration on the console?
We do we not build a page on the web UI for this so that people can enable the things they want? Would that be overkill for the possible options?
As I said before, I would indeed prefer a web ui for the config of the addon. That way we are in complete control of the config file. And I plan to build such a page (I have already put some effort in it, but it is not even nearly ready for now). The page should give the user access to all possible configuration options. If not, we could handicap/limit the use of the agent or force the advanced user to still manually tinker with the config file.
But the zabbix agent has many options including defining certificates and encryption keys for communication and a web ui should do sanity checking on all options as well as provide methods to upload and/or generate those certs/keys so it is not a page that is easily designed overnight. But it is coming sooner or later.
For the sudoers file it is even more problematic; the user can of course modify that file to add additional commands he requires the agent to execute as root, but possible future additions to the ipfire specific monitoring that I or other contributors in the future may add, may also need extra commands in that file to work. (for example the upcoming services monitoring that would require some form of addonctrl status) But I can't update that file with the current behaviour.. or I would have to try to implement some sed magic after the restore in install.sh hoping not to damage the file if it has user customizations in it.
This is not a configuration file in my eyes. It technically is one of course, but we call these files a “system configuration file”. It will be overwritten because what is in it is necessary for the system to work. It does not contain any choices by the user at all.
For that reason, this file should not be backed up and overwritten by every package update.
So I'm not sure on how to handle this differently at the moment. I was thinking for the main config maybe just installing a ".example" version of the latest config so that a user would not have to go search for it on internet ? And in that case even remove all comments and defaults from the actual config (on a fresh install) as that is then provided in the ".example" version as documentation.
Having some example configuration in a location the user would normally not look at is probably not helpful.
I agree with the "location the user would normally not look at". But as I currently see it, I would like to add the the config example next to the actual config. (I see this happen in many software packages in other linux distro's too. Granted, most of the time it is the vendor itself that provides that example config, not the distro. But since we don't have config merging or '.rpmnew' systems as those distro's do have, I see this as some kind of middle way)
So /etc/zabbix_agentd/ in a fresh install would contain - zabbix_agentd.conf.example - the config as shipped with the zabbix source, but renamed to '.example' during build. (with all options in it accompanied with option documentation as comments.) - zabbix_agentd.conf - the active config, provided by us, with only the bare minimum of options required for the agent to run (secure). - this config will not be altered by us after initial install due to the backup/restore.
This way the example config is automatically accurate for the current version of the addon. And the user stays in complete control of his own config in the same way it is in other addons.
Until the web ui is finished..
If you want them to configure things themselves, why not provide good documentation on the wiki?
I do not 'want' them to configure things themselves.. but if they want to actually use the agent they have to at least point the agent to their zabbix server. So minimal manual configuration is required, and that is also already documented on the wiki. But the agent has many options and possibilities and I don't think it is our job to provide extensive non-IPFire specific configuration documentation as that is the job of the vendor (and in case of Zabbix the docs are there and very clear).
But I do am convinced that we should provide a straight-forward way for the more advanced user to get a version of the default config as it is shipped with the current release of the software, especially when it is as verbose in documentation comments as provided by Zabbix.
But that still leaves the sudoers file. The only other possibility I see there is that we don't add this file to the backup and add a comment in it that a user should not modify it as it will get overwritten on update. He can then always still create his own sudoers- file with his own custom rights for the agent.
This is the way to go. In many cases, we have extra files that end on “.user” or “.local” to make it clear that users should make their own changes here.
Ok, for the sudoers, I will go this route then.
Robin
Of course all this can be solved by managing the config using the webgui.. and I'm still planning to create a webgui config page for the agent someday. But we are not there yet :-)
-Michael
Regards
Robin
-Michael
On 9 Feb 2022, at 23:26, Robin Roevens robin.roevens@disroot.org wrote:
- Update from 4.2.6 to latest LTS version 5.0.20
See release notes: https://www.zabbix.com/rn/rn5.0.20
Signed-off-by: Robin Roevens robin.roevens@disroot.org
config/zabbix_agentd/zabbix_agentd.conf | 135 ++++++++++++++++++++++-- lfs/zabbix_agentd | 11 +- 2 files changed, 132 insertions(+), 14 deletions(-)
diff --git a/config/zabbix_agentd/zabbix_agentd.conf b/config/zabbix_agentd/zabbix_agentd.conf index 21b8e0122..aa8b899dc 100644 --- a/config/zabbix_agentd/zabbix_agentd.conf +++ b/config/zabbix_agentd/zabbix_agentd.conf @@ -63,14 +63,33 @@ LogFileSize=0 # Default: # SourceIP=
-### Option: EnableRemoteCommands -# Whether remote commands from Zabbix server are allowed. -# 0 - not allowed -# 1 - allowed +### Option: AllowKey +# Allow execution of item keys matching pattern. +# Multiple keys matching rules may be defined in combination with DenyKey. +# Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments. +# Parameters are processed one by one according their appearance order. +# If no AllowKey or DenyKey rules defined, all keys are allowed. +# +# Mandatory: no
+### Option: DenyKey +# Deny execution of items keys matching pattern. +# Multiple keys matching rules may be defined in combination with AllowKey. +# Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments. +# Parameters are processed one by one according their appearance order. +# If no AllowKey or DenyKey rules defined, all keys are allowed. +# Unless another system.run[*] rule is specified DenyKey=system.run[*] is added by default. # # Mandatory: no # Default: -# EnableRemoteCommands=0 +# DenyKey=system.run[*]
+### Option: EnableRemoteCommands - Deprecated, use AllowKey=system.run[*] or DenyKey=system.run[*] instead +# Internal alias for AllowKey/DenyKey parameters depending on value: +# 0 - DenyKey=system.run[*] +# 1 - AllowKey=system.run[*] +# +# Mandatory: no
### Option: LogRemoteCommands # Enable logging of executed shell commands as warnings. @@ -177,6 +196,28 @@ ServerActive=127.0.0.1 # Default: # HostMetadataItem=
+### Option: HostInterface +# Optional parameter that defines host interface. +# Host interface is used at host auto-registration process. +# An agent will issue an error and not start if the value is over limit of 255 characters. +# If not defined, value will be acquired from HostInterfaceItem. +# +# Mandatory: no +# Range: 0-255 characters +# Default: +# HostInterface=
+### Option: HostInterfaceItem +# Optional parameter that defines an item used for getting host interface. +# Host interface is used at host auto-registration process. +# During an auto-registration request an agent will log a warning message if +# the value returned by specified item is over limit of 255 characters. +# This option is only used when HostInterface is not defined. +# +# Mandatory: no +# Default: +# HostInterfaceItem=
### Option: RefreshActiveChecks # How often list of active checks is refreshed, in seconds. # @@ -265,7 +306,6 @@ ServerActive=127.0.0.1
Include=/etc/zabbix_agentd/zabbix_agentd.d/*.conf
####### USER-DEFINED MONITORED PARAMETERS #######
### Option: UnsafeUserParameters @@ -299,7 +339,7 @@ Include=/etc/zabbix_agentd/zabbix_agentd.d/*.conf # # Mandatory: no # Default: -# LoadModulePath=/usr/lib/modules +# LoadModulePath=${libdir}/modules
LoadModulePath=/usr/lib/zabbix
@@ -357,14 +397,14 @@ LoadModulePath=/usr/lib/zabbix # TLSCRLFile=
### Option: TLSServerCertIssuer -# Allowed server certificate issuer. +# Allowed server certificate issuer. # # Mandatory: no # Default: # TLSServerCertIssuer=
### Option: TLSServerCertSubject -# Allowed server certificate subject. +# Allowed server certificate subject. # # Mandatory: no # Default: @@ -397,3 +437,80 @@ LoadModulePath=/usr/lib/zabbix # Mandatory: no # Default: # TLSPSKFile=
+####### For advanced users - TLS ciphersuite selection criteria #######
+### Option: TLSCipherCert13 +# Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3. +# Override the default ciphersuite selection criteria for certificate-based encryption. +# +# Mandatory: no +# Default: +# TLSCipherCert13=
+### Option: TLSCipherCert +# GnuTLS priority string or OpenSSL (TLS 1.2) cipher string. +# Override the default ciphersuite selection criteria for certificate-based encryption. +# Example for GnuTLS: +# NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+AES-128- GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP- NULL:+SIGN- ALL:+CTYPE-X.509 +# Example for OpenSSL: +# EECDH+aRSA+AES128:RSA+aRSA+AES128 +# +# Mandatory: no +# Default: +# TLSCipherCert=
+### Option: TLSCipherPSK13 +# Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3. +# Override the default ciphersuite selection criteria for PSK-based encryption. +# Example: +# TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256 +# +# Mandatory: no +# Default: +# TLSCipherPSK13=
+### Option: TLSCipherPSK +# GnuTLS priority string or OpenSSL (TLS 1.2) cipher string. +# Override the default ciphersuite selection criteria for PSK-based encryption. +# Example for GnuTLS: +# NONE:+VERS-TLS1.2:+ECDHE-PSK:+PSK:+AES-128- GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP- NULL:+SIGN- ALL +# Example for OpenSSL: +# kECDHEPSK+AES128:kPSK+AES128 +# +# Mandatory: no +# Default: +# TLSCipherPSK=
+### Option: TLSCipherAll13 +# Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3. +# Override the default ciphersuite selection criteria for certificate- and PSK-based encryption. +# Example: +# TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256 :TLS_AES_128_GCM_SHA256 +# +# Mandatory: no +# Default: +# TLSCipherAll13=
+### Option: TLSCipherAll +# GnuTLS priority string or OpenSSL (TLS 1.2) cipher string. +# Override the default ciphersuite selection criteria for certificate- and PSK-based encryption. +# Example for GnuTLS: +# NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+ECDHE- PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE- ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509 +# Example for OpenSSL: +# EECDH+aRSA+AES128:RSA+aRSA+AES128:kECDHEPSK+AES128: kPSK+AES128 +# +# Mandatory: no +# Default: +# TLSCipherAll=
+####### For advanced users - TCP-related fine-tuning parameters #######
+## Option: ListenBacklog +# The maximum number of pending connections in the queue. This parameter is passed to +# listen() function as argument 'backlog' (see "man listen"). +# +# Mandatory: no +# Range: 0 - INT_MAX (depends on system, too large values may be silently truncated to implementation-specified maximum) +# Default: SOMAXCONN (hard-coded constant, depends on system) +# ListenBacklog= diff --git a/lfs/zabbix_agentd b/lfs/zabbix_agentd index c69643a54..28fe97b4f 100644 --- a/lfs/zabbix_agentd +++ b/lfs/zabbix_agentd @@ -1,7 +1,7 @@ ############################################################### #### ############ # # # IPFire.org - A linux based firewall # -# Copyright (C) 2007-2019 IPFire Team info@ipfire.org # +# Copyright (C) 2007-2022 IPFire Team info@ipfire.org # # # # This program is free software: you can redistribute it and/or modify # # it under the terms of the GNU General Public License as published by # @@ -24,7 +24,7 @@
include Config
-VER = 4.2.6 +VER = 5.0.20
THISAPP = zabbix-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = zabbix_agentd -PAK_VER = 4 +PAK_VER = 5 DEPS =
############################################################### #### ############ @@ -43,7 +43,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 6cd55cd743d416d9ffbf2e6fdee680ee +$(DL_FILE)_MD5 = 52df25394f9a4cf83ff55278b23e6295
install : $(TARGET)
@@ -80,7 +80,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) --prefix=/usr \ --enable-agent \ --sysconfdir=/etc/zabbix_agentd \ - --with-openssl + --with-openssl \ + --with-libcurl
cd $(DIR_APP) && make cd $(DIR_APP) && make install -- 2.34.1
-- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door MailScanner en lijkt schoon te zijn.
-- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door MailScanner en lijkt schoon te zijn.