Thank you.
On 3 Mar 2021, at 12:30, Adolf Belka (ipfire) adolf.belka@ipfire.org wrote:
Hi Michael,
I will pick this up.
Regards,
Adolf.
On 03/03/2021 11:16, Michael Tremer wrote:
Who wants to grab this one?
Looks like a simple package upgrade with no other changes required.
Best, -Michael
Begin forwarded message:
*From: *Damien Miller <djm@cvs.openbsd.org mailto:djm@cvs.openbsd.org> *Subject: **[openssh-unix-announce] Announce: OpenSSH 8.5 released* *Date: *3 March 2021 at 01:19:55 GMT *To: *openssh-unix-announce@mindrot.org mailto:openssh-unix-announce@mindrot.org
OpenSSH 8.5 has just been released. It will be available from the mirrors listed at https://www.openssh.com/ https://www.openssh.com/ shortly.
OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support.
Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: https://www.openssh.com/donations.html https://www.openssh.com/donations.html
Future deprecation notice
It is now possible[1] to perform chosen-prefix attacks against the SHA-1 algorithm for less than USD$50K.
In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1 hash algorithm in conjunction with the RSA public key algorithm. OpenSSH will disable this signature scheme by default in the near future.
Note that the deactivation of "ssh-rsa" signatures does not necessarily require cessation of use for RSA keys. In the SSH protocol, keys may be capable of signing using multiple algorithms. In particular, "ssh-rsa" keys are capable of signing using "rsa-sha2-256" (RSA/SHA256), "rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of these is being turned off by default.
This algorithm is unfortunately still used widely despite the existence of better alternatives, being the only remaining public key signature algorithm specified by the original SSH RFCs that is still enabled by default.
The better alternatives include:
The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These algorithms have the advantage of using the same key type as "ssh-rsa" but use the safe SHA-2 hash algorithms. These have been supported since OpenSSH 7.2 and are already used by default if the client and server support them.
The RFC8709 ssh-ed25519 signature algorithm. It has been supported in OpenSSH since release 6.5.
The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These have been supported by OpenSSH since release 5.7.
To check whether a server is using the weak ssh-rsa public key algorithm, for host authentication, try to connect to it after removing the ssh-rsa algorithm from ssh(1)'s allowed list:
ssh -oHostKeyAlgorithms=-ssh-rsa user@host
If the host key verification fails and no other supported host key types are available, the server software on that host should be upgraded.
This release enables the UpdateHostKeys option by default to assist the client by automatically migrating to better algorithms.
[1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and Application to the PGP Web of Trust" Leurent, G and Peyrin, T (2020) https://eprint.iacr.org/2020/014.pdf
Security
ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket.
On modern operating systems where the OS can provide information about the user identity connected to a socket, OpenSSH ssh-agent and sshd limit agent socket access only to the originating user and root. Additional mitigation may be afforded by the system's malloc(3)/free(3) implementation, if it detects double-free conditions.
The most likely scenario for exploitation is a user forwarding an agent either to an account shared with a malicious user or to a host with an attacker holding root access.
Portable sshd(8): Prevent excessively long username going to PAM. This is a mitigation for a buffer overflow in Solaris' PAM username handling (CVE-2020-14871), and is only enabled for Sun-derived PAM implementations. This is not a problem in sshd itself, it only prevents sshd from being used as a vector to attack Solaris' PAM. It does not prevent the bug in PAM from being exploited via some other PAM application. GHPR#212
Potentially-incompatible changes
This release includes a number of changes that may affect existing configurations:
ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519.
ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes.
ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001.
ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519.
The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. Per its designers, the sntrup4591761 algorithm was superseded almost two years ago by sntrup761.
(note this both the updated method and the one that it replaced are disabled by default)
ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers.
Changes since OpenSSH 8.4
New features
ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions:
- The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile).
- The same key does not exist under another name.
- A certificate host key is not in use.
- known_hosts contains no matching wildcard hostname pattern.
- VerifyHostKeyDNS is not enabled.
- The default UserKnownHostsFile is in use.
We expect some of these conditions will be modified or relaxed in future.
ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists.
ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key.
ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys.
ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files.
ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS.
ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials.
sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit.
Bugfixes
ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224
sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR#201
ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded.
ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229
ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client.
ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253
ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet.
ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206
Minor man page fixes (capitalization, commas, etc.) bz#3223
sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222
ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879
ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320
sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239
sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248.
ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250
ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type.
Portability
sshd(8): add a number of platform-specific syscalls to the Linux seccomp-bpf sandbox. bz#3232 bz#3260
sshd(8): remove debug message from sigchld handler that could cause deadlock on some platforms. bz#3259
Sync contrib/ssh-copy-id with upstream.
unittests: add a hostname function for systems that don't have it. Some systems don't have a hostname command (it's not required by POSIX). The do have uname -n (which is), but not all of those have it report the FQDN.
Checksums:
SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e
SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU=
SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e
SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU=
Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available from the mirror sites: https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc
Please note that the OpenPGP key used to sign releases has been rotated for this release. The new key has been signed by the previous key to provide continuity.
Reporting Bugs:
- Please read https://www.openssh.com/report.html
Security bugs should be reported directly to openssh@openssh.com _______________________________________________ openssh-unix-announce mailing list openssh-unix-announce@mindrot.org https://lists.mindrot.org/mailman/listinfo/openssh-unix-announce