On Fri, 2018-11-02 at 14:13 +0000, Daniel Weismüller wrote:
Hi Matthias
I've tested your changes. But for me it didn't work. 14:24:48 squid: Bungled /etc/squid/squid.conf line 136: url_rewrite_children 8 startup=2 idle=2 queue-size=64
According to the squid pages the "queue-size" argument isn't availlable for squid 3.5. http://www.squid-cache.org/Versions/v3/3.5/cfgman/url_rewrite_children.html
I changed the code to: print FILE "url_rewrite_children ",&General::number_cpu_cores()," startup=",&General::number_cpu_cores()," idle=",&General::number_cpu_cores()," \n\n";
This seems to work with squid 3.5 and leads to this line in 'squid.conf': url_rewrite_children 8 startup=8 idle=8
It is quite important to increase the size of the queue, because in your case 16 might be enough, but that isn't true if that code is executed on a system with only one core.
But I strongly agree with startup and idle being the number of cores too, so that always a constant number of redirectors is running.
-Michael
As you can see, my Test-ipfire has 8 virtual cores, so I couldn't see the above problems. Thanks for testing it!
Daniel
Matthias Fischer – Tue, 30. October 2018 18:12
On 30.10.2018 17:05, Michael Tremer wrote:
On Tue, 2018-10-30 at 15:37 +0100, Matthias Fischer wrote:
On 30.10.2018 15:03, Michael Tremer wrote:
Hey,
Hello,
do you have any idea why the redirector is busy?
Sorry: no. Long time ago, I searched for an optimal value but didn't find any useful links. Right now, I'm testing 'squid 4.4" and its always the same. Too few redirectors => warning.
I only found something like "If you see this warning, you should increase the number of child processes and restart (or reconfigure) Squid. If the queue size becomes twice the number of redirectors, Squid aborts with a fatal message."
The last bit is not very good. Why does squid not queue the requests long enough? That means even CPU cores * 2 or 4 won't be enough. On a single- core machine that would only be 2 requests. LOL
Looking at the options that we have ( www.squid-cache.org/Doc/config/url_rewrite_children/), could you please test this:
url_rewrite_children X startup=N idle=N queue-size=64
With N being the number of cores that your system has. I do not think that
there
is any point in trying to run more than N queries at a time.
But squid doesn't start anything when it starts up. startup= changes that
and
idle= makes sure that all processes remain active.
Yep. I had this already in my 'proxy.cgi'.
I applied the patches again and changed the 'url_rewrite_children'-line in 'proxy.cgi' to read:
print FILE "url_rewrite_children ", &General::number_cpu_cores()," startup=2 idle=2 queue-size=64\n\n";
This leads to this line in 'squid.conf': url_rewrite_children 2 startup=2 idle=2 queue-size=64
No warnings so far. Testing ...
Best, Matthias
A queue size of 64 seems sensible to me because that is probably what the average tabloid newspaper page has. Maybe it should be 16 * N or so...
-Michael
Taken from:
etutorials.org/Server+Administration/Squid.+The+definitive+guide/Chapter+11. +Redirectors/11.4+Configuring+Squid/
So my current "40"-value was found through "try and look if the warning comes again"...
Best, Matthias
-Michael
On Tue, 2018-10-30 at 14:54 +0100, Matthias Fischer wrote:
Hi,
I tested this patch today and I fear the resulting value is too low.
For me, its leads to:
***SNIP*** ... 2018/10/30 14:42:43 kid1| WARNING: All 2/2 redirector processes are
busy.
2018/10/30 14:42:43 kid1| WARNING: 4 pending requests queued 2018/10/30 14:42:43 kid1| WARNING: Consider increasing the number of redirector processes in your config file. ...
Current setting is "40" (Duo box, 2 Cores, 'squidclamav, squidguard)
Best, Matthias
On 30.10.2018 12:06, Daniel Weismüller wrote: > I added a function to determine the number of cores. > Now the number of squid processes will be equal to the number of
logical
> cores. > Further I removed the possibility of changing the number > of squid processes in the proxy.cgi > > Signed-off-by: Daniel Weismüller daniel.weismueller@ipfire.org > --- > config/cfgroot/general-functions.pl | 7 +++++++ > html/cgi-bin/proxy.cgi | 16 ++-------------- > 2 files changed, 9 insertions(+), 14 deletions(-) > > diff --git a/config/cfgroot/general-functions.pl > b/config/cfgroot/general- > functions.pl > index 0577afe28..e8495e885 100644 > --- a/config/cfgroot/general-functions.pl > +++ b/config/cfgroot/general-functions.pl > @@ -1165,5 +1165,12 @@ sub dnssec_status() { > > return $status; > } > +sub number_cpu_cores() { > + open my $cpuinfo, "/proc/cpuinfo" or die "Can't open cpuinfo: > $!\n"; > + my $cores = scalar (map /^processor/, <$cpuinfo>); > + close $cpuinfo; > + > + return $cores; > +} > > 1; > diff --git a/html/cgi-bin/proxy.cgi b/html/cgi-bin/proxy.cgi > index 738425b9a..92bebfe18 100644 > --- a/html/cgi-bin/proxy.cgi > +++ b/html/cgi-bin/proxy.cgi > @@ -287,7 +287,6 @@ $proxysettings{'IDENT_USER_ACL'} = 'positive'; > $proxysettings{'ENABLE_FILTER'} = 'off'; > $proxysettings{'ENABLE_UPDXLRATOR'} = 'off'; > $proxysettings{'ENABLE_CLAMAV'} = 'off'; > -$proxysettings{'CHILDREN'} = '10'; > > $ncsa_buttontext = $Lang::tr{'advproxy NCSA create user'}; > > @@ -437,11 +436,6 @@ if (($proxysettings{'ACTION'} eq
$Lang::tr{'save'})
> > > > > ($proxysettings{'ACTION'} > $errormessage = $Lang::tr{'invalid maximum incoming > size'}; > goto ERROR; > } > - if (!($proxysettings{'CHILDREN'} =~ /^\d+$/) || > ($proxysettings{'CHILDREN'} < 1)) > - { > - $errormessage = $Lang::tr{'advproxy invalid num of > children'}; > - goto ERROR; > - } > if ($proxysettings{'ENABLE_BROWSER_CHECK'} eq 'on') > { > $browser_regexp = ''; > @@ -1034,12 +1028,8 @@ print <<END > </table> > <hr size='1'> > <table width='100%'> > -<tr><td class='base' colspan='4'><b>$Lang::tr{'advproxy > redirector > children'}</b></td></tr> > -<tr><td class='base' >$Lang::tr{'processes'}: <img
src='/blob.gif'
> alt='*' /><input type='text' name='CHILDREN' > value='$proxysettings{'CHILDREN'}' size='5' /></td> > END > ; > -my $count = `ip n| wc -l`; > -if ( $count < 1 ){$count = 1;} > if ( -e "/usr/bin/squidclamav" ) { > print "<td class='base'><b>".$Lang::tr{'advproxy > squidclamav'}."</b><br > />"; > if ( ! -e "/var/run/clamav/clamd.pid" ){ > @@ -1048,18 +1038,16 @@ if ( -e "/usr/bin/squidclamav" ) { > } > else { > print $Lang::tr{'advproxy enabled'}."<input > type='checkbox' > name='ENABLE_CLAMAV' ".$checked{'ENABLE_CLAMAV'}{'on'}." /><br > />"; > - print "+ ".int(( $count**(1/3)) * 8);} > +} > print "</td>"; > } else { > print "<td></td>"; > } > print "<td class='base'><a href='/cgi- > bin/urlfilter.cgi'><b>".$Lang::tr{'advproxy url > filter'}."</a></b><br > />"; > print $Lang::tr{'advproxy enabled'}."<input type='checkbox' > name='ENABLE_FILTER' ".$checked{'ENABLE_FILTER'}{'on'}." /><br > />"; > -print "+ ".int(($count**(1/3)) * 6); > print "</td>"; > print "<td class='base'><a href='/cgi- > bin/updatexlrator.cgi'><b>".$Lang::tr{'advproxy update > accelerator'}."</a></b><br />"; > print $Lang::tr{'advproxy enabled'}."<input type='checkbox' > name='ENABLE_UPDXLRATOR' ".$checked{'ENABLE_UPDXLRATOR'}{'on'}."
/><br
> />"; > -print "+ ".int(($count**(1/3)) * 5); > print "</td></tr>"; > print <<END > </table> > @@ -4095,7 +4083,7 @@ END > if (($proxysettings{'ENABLE_FILTER'} eq 'on') || > ($proxysettings{'ENABLE_UPDXLRATOR'} eq 'on') || > ($proxysettings{'ENABLE_CLAMAV'} eq 'on')) > { > print FILE "url_rewrite_program > /usr/sbin/redirect_wrapper\n"; > - print FILE "url_rewrite_children > $proxysettings{'CHILDREN'}\n\n"; > + print FILE "url_rewrite_children ", > &General::number_cpu_cores(), "\n\n"; > } > > # Include file with user defined settings.