We used to create some iptables rules that permitted traffic to the firewall from IPsec peers. This however doesn't work due to changes in iana-etc and it looks like those rules are entirely absolete now.
This patch removes them which should not cause any functional changes.
Fixes: #12808 Signed-off-by: Michael Tremer michael.tremer@ipfire.org --- src/patches/strongswan-ipfire.patch | 93 ++++++++++------------------- 1 file changed, 32 insertions(+), 61 deletions(-)
diff --git a/src/patches/strongswan-ipfire.patch b/src/patches/strongswan-ipfire.patch index 0f137ca2a..0f2be7483 100644 --- a/src/patches/strongswan-ipfire.patch +++ b/src/patches/strongswan-ipfire.patch @@ -1,7 +1,16 @@ -diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_updown/_updown.in ---- strongswan-5.9.3.org/src/_updown/_updown.in 2020-12-09 19:01:30.000000000 +0100 -+++ strongswan-5.9.3/src/_updown/_updown.in 2021-10-25 17:30:15.669773781 +0200 -@@ -242,12 +242,9 @@ +commit 654e2b7688c5fbd4e1fc46648bc1864301fb6027 +Author: Michael Tremer michael.tremer@ipfire.org +Date: Mon Mar 21 19:49:02 2022 +0000 + + IPFire modifications to _updown script + + Signed-off-by: Michael Tremer michael.tremer@ipfire.org + +diff --git a/src/_updown/_updown.in b/src/_updown/_updown.in +index 34eaf68c7..514ecb578 100644 +--- a/src/_updown/_updown.in ++++ b/src/_updown/_updown.in +@@ -242,10 +242,10 @@ up-host:iptables) # connection to me, with (left/right)firewall=yes, coming up # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -10,12 +19,11 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER_CLIENT $S_PEER_PORT \ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT - iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \ -- -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ -- -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT ++ iptables --wait -I IPSECOUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \ + -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ + -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT # - # allow IPIP traffic because of the implicit SA created by the kernel if - # IPComp is used (for small inbound packets that are not compressed) -@@ -263,10 +260,10 @@ +@@ -263,10 +263,10 @@ up-host:iptables) if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ] then logger -t $TAG -p $FAC_PRIO \ @@ -28,7 +36,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd fi fi ;; -@@ -274,12 +271,9 @@ +@@ -274,10 +274,10 @@ down-host:iptables) # connection to me, with (left/right)firewall=yes, going down # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -37,12 +45,11 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER_CLIENT $S_PEER_PORT \ -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT - iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \ -- -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ -- -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT ++ iptables --wait -D IPSECOUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \ + -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ + -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT # - # IPIP exception teardown - if [ -n "$PLUTO_IPCOMP" ] -@@ -294,10 +288,10 @@ +@@ -294,10 +294,10 @@ down-host:iptables) if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ] then logger -t $TAG -p $FAC_PRIO -- \ @@ -55,7 +62,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd fi fi ;; -@@ -305,34 +299,16 @@ +@@ -305,34 +305,16 @@ up-client:iptables) # connection to client subnet, with (left/right)firewall=yes, coming up # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -91,7 +98,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT fi # -@@ -342,47 +318,42 @@ +@@ -342,10 +324,10 @@ up-client:iptables) if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ] then logger -t $TAG -p $FAC_PRIO \ @@ -103,25 +110,8 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd + "client+ $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT" fi fi -+ -+ # -+ # Open Firewall for IPinIP + AH + ESP Traffic -+ iptables --wait -I IPSECINPUT 1 -i $PLUTO_INTERFACE -p IP \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ iptables --wait -I IPSECINPUT 1 -i $PLUTO_INTERFACE -p AH \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ iptables --wait -I IPSECINPUT 1 -i $PLUTO_INTERFACE -p ESP \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ if [ $VPN_LOGGING ] -+ then -+ logger -t $TAG -p $FAC_PRIO \ -+ "tunnel+ $PLUTO_PEER -- $PLUTO_ME" -+ fi ;; - down-client:iptables) +@@ -353,36 +335,14 @@ down-client:iptables) # connection to client subnet, with (left/right)firewall=yes, going down # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -159,7 +149,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER -d $PLUTO_ME $IPSEC_POLICY_IN -j ACCEPT fi # -@@ -392,12 +363,29 @@ +@@ -392,10 +352,10 @@ down-client:iptables) if [ "$PLUTO_PEER_CLIENT" = "$PLUTO_PEER/32" ] then logger -t $TAG -p $FAC_PRIO -- \ @@ -171,27 +161,8 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd + "client- $PLUTO_PEER_ID $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT" fi fi -+ -+ # -+ # Close Firewall for IPinIP + AH + ESP Traffic -+ iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p IP \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p AH \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ iptables --wait -D IPSECINPUT -i $PLUTO_INTERFACE -p ESP \ -+ -s $PLUTO_PEER $S_PEER_PORT \ -+ -d $PLUTO_ME $D_MY_PORT -j ACCEPT -+ if [ $VPN_LOGGING ] -+ then -+ logger -t $TAG -p $FAC_PRIO \ -+ "tunnel- $PLUTO_PEER -- $PLUTO_ME" -+ fi ;; - # - # IPv6 -@@ -422,10 +410,10 @@ +@@ -422,10 +382,10 @@ up-host-v6:iptables) # connection to me, with (left/right)firewall=yes, coming up # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -204,7 +175,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT # -@@ -454,10 +442,10 @@ +@@ -454,10 +414,10 @@ down-host-v6:iptables) # connection to me, with (left/right)firewall=yes, going down # This is used only by the default updown script, not by your custom # ones, so do not mess with it; see CAUTION comment up at top. @@ -217,7 +188,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \ -d $PLUTO_PEER_CLIENT $D_PEER_PORT -j ACCEPT # -@@ -487,10 +475,10 @@ +@@ -487,10 +447,10 @@ up-client-v6:iptables) # ones, so do not mess with it; see CAUTION comment up at top. if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ] then @@ -230,7 +201,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER_CLIENT $S_PEER_PORT \ -d $PLUTO_MY_CLIENT $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT fi -@@ -499,10 +487,10 @@ +@@ -499,10 +459,10 @@ up-client-v6:iptables) # or sometimes host access via the internal IP is needed if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] then @@ -243,7 +214,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_MY_CLIENT $S_MY_PORT \ -d $PLUTO_PEER_CLIENT $D_PEER_PORT $IPSEC_POLICY_OUT -j ACCEPT fi -@@ -535,11 +523,11 @@ +@@ -535,11 +495,11 @@ down-client-v6:iptables) # ones, so do not mess with it; see CAUTION comment up at top. if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/128" ] then @@ -257,7 +228,7 @@ diff -Naur strongswan-5.9.3.org/src/_updown/_updown.in strongswan-5.9.3/src/_upd -s $PLUTO_PEER_CLIENT $S_PEER_PORT \ -d $PLUTO_MY_CLIENT $D_MY_PORT \ $IPSEC_POLICY_IN -j ACCEPT -@@ -549,11 +537,11 @@ +@@ -549,11 +509,11 @@ down-client-v6:iptables) # or sometimes host access via the internal IP is needed if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] then