- Update from 10.37 to 10.39 - Update of rootfile - Changelog Version 10.39 29-October-2021 1. Fix incorrect detection of alternatives in first character search in JIT. 2. Merged patch from @carenas (GitHub #28): Visual Studio 2013 includes support for %zu and %td, so let newer versions of it avoid the fallback, and while at it, make sure that the first check is for DISABLE_PERCENT_ZT so it will be always honoured if chosen. prtdiff_t is signed, so use a signed type instead, and make sure that an appropiate width is chosen if pointers are 64bit wide and long is not (ex: Windows 64bit). IMHO removing the cast (and therefore the positibilty of truncation) make the code cleaner and the fallback is likely portable enough with all 64-bit POSIX systems doing LP64 except for Windows. 3. Merged patch from @carenas (GitHub #29) to update to Unicode 14.0.0. 4. Merged patch from @carenas (GitHub #30): * Cleanup: remove references to no longer used stdint.h Since 19c50b9d (Unconditionally use inttypes.h instead of trying for stdint.h (simplification) and remove the now unnecessary inclusion in pcre2_internal.h., 2018-11-14), stdint.h is no longer used. Remove checks for it in autotools and CMake and document better the expected build failures for systems that might have stdint.h (C99) and not inttypes.h (from POSIX), like old Windows. * Cleanup: remove detection for inttypes.h which is a hard dependency CMake checks for standard headers are not meant to be used for hard dependencies, so will prevent a possible fallback to work. Alternatively, the header could be checked to make the configuration fail instead of breaking the build, but that was punted, as it was missing anyway from autotools. 5. Merged patch from @carenas (GitHub #32): * jit: allow building with ancient MSVC versions Visual Studio older than 2013 fails to build with JIT enabled, because it is unable to parse non C89 compatible syntax, with mixed declarations and code. While most recent compilers wouldn't even report this as a warning since it is valid C99, it could be also made visible by adding to gcc/clang the -Wdeclaration-after-statement flag at build time. Move the code below the affected definitions. * pcre2grep: avoid mixing declarations with code Since d5a61ee8 (Patch to detect (and ignore) symlink loops in pcre2grep, 2021-08-28), code will fail to build in a strict C89 compiler. Reformat slightly to make it C89 compatible again. Version 10.38 01-October-2021 1. Fix invalid single character repetition issues in JIT when the repetition is inside a capturing bracket and the bracket is preceeded by character literals. 2. Installed revised CMake configuration files provided by Jan-Willem Blokland. This extends the CMake build system to build both static and shared libraries in one go, builds the static library with PIC, and exposes PCRE2 libraries using the CMake config files. JWB provided these notes: - Introduced CMake variable BUILD_STATIC_LIBS to build the static library. - Make a small modification to config-cmake.h.in by removing the PCRE2_STATIC variable. Added PCRE2_STATIC variable to the static build using the target_compile_definitions() function. - Extended the CMake config files. - Introduced CMake variable PCRE2_USE_STATIC_LIBS to easily switch between the static and shared libraries. - Added the PCRE_STATIC variable to the target compile definitions for the import of the static library. Building static and shared libraries using MSVC results in a name clash of the libraries. Both static and shared library builds create, for example, the file pcre2-8.lib. Therefore, I decided to change the static library names by adding "-static". For example, pcre2-8.lib has become pcre2-8-static.lib. [Comment by PH: this is MSVC-specific. It doesn't happen on Linux.] 3. Increased the minimum release number for CMake to 3.0.0 because older than 2.8.12 is deprecated (it was set to 2.8.5) and causes warnings. Even 3.0.0 is quite old; it was released in 2014. 4. Implemented a modified version of Thomas Tempelmann's pcre2grep patch for detecting symlink loops. This is dependent on the availability of realpath(), which is now tested for in ./configure and CMakeLists.txt. 5. Implemented a modified version of Thomas Tempelmann's patch for faster case-independent "first code unit" searches for unanchored patterns in 8-bit mode in the interpreters. Instead of just remembering whether one case matched or not, it remembers the position of a previous match so as to avoid unnecessary repeated searching. 6. Perl now locks out \K in lookarounds, so PCRE2 now does the same by default. However, just in case anybody was relying on the old behaviour, there is an option called PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK that enables the old behaviour. An option has also been added to pcre2grep to enable this. 7. Re-enable a JIT optimization which was unintentionally disabled in 10.35. 8. There is a loop counter to catch excessively crazy patterns when checking the lengths of lookbehinds at compile time. This was incorrectly getting reset whenever a lookahead was processed, leading to some fuzzer-generated patterns taking a very long time to compile when (?|) was present in the pattern, because (?|) disables caching of group lengths.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/pcre2 | 226 +++++++++++++++++----------------- lfs/pcre2 | 4 +- 2 files changed, 115 insertions(+), 115 deletions(-)
diff --git a/config/rootfiles/common/pcre2 b/config/rootfiles/common/pcre2 index e5b02d1f7..9d3e33496 100644 --- a/config/rootfiles/common/pcre2 +++ b/config/rootfiles/common/pcre2 @@ -6,132 +6,132 @@ #usr/lib/libpcre2-16.la #usr/lib/libpcre2-16.so usr/lib/libpcre2-16.so.0 -usr/lib/libpcre2-16.so.0.10.2 +usr/lib/libpcre2-16.so.0.10.4 #usr/lib/libpcre2-32.la #usr/lib/libpcre2-32.so usr/lib/libpcre2-32.so.0 -usr/lib/libpcre2-32.so.0.10.2 +usr/lib/libpcre2-32.so.0.10.4 #usr/lib/libpcre2-8.la #usr/lib/libpcre2-8.so usr/lib/libpcre2-8.so.0 -usr/lib/libpcre2-8.so.0.10.2 +usr/lib/libpcre2-8.so.0.10.4 #usr/lib/libpcre2-posix.la #usr/lib/libpcre2-posix.so usr/lib/libpcre2-posix.so.3 -usr/lib/libpcre2-posix.so.3.0.0 +usr/lib/libpcre2-posix.so.3.0.1 #usr/lib/pkgconfig/libpcre2-16.pc #usr/lib/pkgconfig/libpcre2-32.pc #usr/lib/pkgconfig/libpcre2-8.pc #usr/lib/pkgconfig/libpcre2-posix.pc -#usr/share/doc/pcre-pcre2-10.37 -#usr/share/doc/pcre-pcre2-10.37/AUTHORS -#usr/share/doc/pcre-pcre2-10.37/COPYING -#usr/share/doc/pcre-pcre2-10.37/ChangeLog -#usr/share/doc/pcre-pcre2-10.37/LICENCE -#usr/share/doc/pcre-pcre2-10.37/NEWS -#usr/share/doc/pcre-pcre2-10.37/README -#usr/share/doc/pcre-pcre2-10.37/html -#usr/share/doc/pcre-pcre2-10.37/html/NON-AUTOTOOLS-BUILD.txt -#usr/share/doc/pcre-pcre2-10.37/html/README.txt -#usr/share/doc/pcre-pcre2-10.37/html/index.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2-config.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_callout_enumerate.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_copy.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_copy_with_tables.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_copy.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_config.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_copy.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_converted_pattern_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_dfa_match.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_copy.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_error_message.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_mark.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_match_data_size.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_ovector_count.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_ovector_pointer.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_startchar.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_compile.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_free_unused_memory.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_match.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_assign.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_maketables.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_maketables_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_copy.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_create.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_create_from_pattern.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_pattern_convert.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_pattern_info.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_decode.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_encode.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_get_number_of_codes.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_bsr.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_callout.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_character_tables.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_compile_extra_options.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_compile_recursion_guard.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_depth_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_glob_escape.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_glob_separator.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_heap_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_match_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_max_pattern_length.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_newline.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_offset_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_parens_nest_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_recursion_limit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_recursion_memory_management.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_substitute_callout.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substitute.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_copy_byname.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_copy_bynumber.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_get_byname.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_get_bynumber.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_length_byname.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_length_bynumber.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_list_free.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_list_get.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_nametable_scan.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_number_from_name.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2api.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2build.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2callout.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2compat.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2convert.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2demo.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2grep.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2jit.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2limits.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2matching.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2partial.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2pattern.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2perform.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2posix.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2sample.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2serialize.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2syntax.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2test.html -#usr/share/doc/pcre-pcre2-10.37/html/pcre2unicode.html -#usr/share/doc/pcre-pcre2-10.37/pcre2-config.txt -#usr/share/doc/pcre-pcre2-10.37/pcre2.txt -#usr/share/doc/pcre-pcre2-10.37/pcre2grep.txt -#usr/share/doc/pcre-pcre2-10.37/pcre2test.txt +#usr/share/doc/pcre-pcre2-10.39 +#usr/share/doc/pcre-pcre2-10.39/AUTHORS +#usr/share/doc/pcre-pcre2-10.39/COPYING +#usr/share/doc/pcre-pcre2-10.39/ChangeLog +#usr/share/doc/pcre-pcre2-10.39/LICENCE +#usr/share/doc/pcre-pcre2-10.39/NEWS +#usr/share/doc/pcre-pcre2-10.39/README +#usr/share/doc/pcre-pcre2-10.39/html +#usr/share/doc/pcre-pcre2-10.39/html/NON-AUTOTOOLS-BUILD.txt +#usr/share/doc/pcre-pcre2-10.39/html/README.txt +#usr/share/doc/pcre-pcre2-10.39/html/index.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2-config.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_callout_enumerate.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_code_copy.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_code_copy_with_tables.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_code_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_compile.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_compile_context_copy.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_compile_context_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_compile_context_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_config.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_convert_context_copy.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_convert_context_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_convert_context_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_converted_pattern_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_dfa_match.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_general_context_copy.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_general_context_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_general_context_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_error_message.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_mark.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_match_data_size.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_ovector_count.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_ovector_pointer.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_get_startchar.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_compile.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_free_unused_memory.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_match.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_stack_assign.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_stack_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_jit_stack_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_maketables.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_maketables_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_context_copy.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_context_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_context_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_data_create.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_data_create_from_pattern.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_match_data_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_pattern_convert.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_pattern_info.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_serialize_decode.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_serialize_encode.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_serialize_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_serialize_get_number_of_codes.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_bsr.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_callout.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_character_tables.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_compile_extra_options.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_compile_recursion_guard.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_depth_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_glob_escape.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_glob_separator.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_heap_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_match_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_max_pattern_length.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_newline.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_offset_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_parens_nest_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_recursion_limit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_recursion_memory_management.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_set_substitute_callout.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substitute.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_copy_byname.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_copy_bynumber.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_get_byname.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_get_bynumber.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_length_byname.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_length_bynumber.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_list_free.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_list_get.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_nametable_scan.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2_substring_number_from_name.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2api.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2build.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2callout.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2compat.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2convert.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2demo.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2grep.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2jit.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2limits.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2matching.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2partial.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2pattern.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2perform.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2posix.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2sample.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2serialize.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2syntax.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2test.html +#usr/share/doc/pcre-pcre2-10.39/html/pcre2unicode.html +#usr/share/doc/pcre-pcre2-10.39/pcre2-config.txt +#usr/share/doc/pcre-pcre2-10.39/pcre2.txt +#usr/share/doc/pcre-pcre2-10.39/pcre2grep.txt +#usr/share/doc/pcre-pcre2-10.39/pcre2test.txt #usr/share/man/man1/pcre2-config.1 #usr/share/man/man1/pcre2grep.1 #usr/share/man/man1/pcre2test.1 diff --git a/lfs/pcre2 b/lfs/pcre2 index fd9548a73..00bea9203 100644 --- a/lfs/pcre2 +++ b/lfs/pcre2 @@ -24,7 +24,7 @@
include Config
-VER = 10.37 +VER = 10.39
THISAPP = pcre2-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -54,7 +54,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = a0b59d89828f62d2e1caac04f7c51e0b +$(DL_FILE)_MD5 = 7389e3524de2cda3d21fde8c224febf1
install : $(TARGET)