- IPFire-3.x - Update from version 7.3-1.1 to 7.4-1 - Changelog 7.4 - The docker image used for CI and release builds is now based on Debian 12 instead of Ubuntu 18.04. - macOS: CI and release builds are now generated for the x86_64 and arm64 targets. 32 bit platforms will require to be compiled from the source. - smartctl '-t short', '-t long' and '-X': NVMe support. - smartctl '-l selftest': NVMe support. - smartctl '-l farm': Prints Seagate's vendor-specific Field Access Reliability Metrics (FARM) log for ATA and SCSI drives. - smartctl '-l error': Now also prints an error message for each entry of NVMe error information log. - smartctl '-l genstats': Prints SCSI General statistics and performance log page. - smartctl '-i' and '--identify': ACS-4/5/6 enhancements. - smartctl '-c': Added NVMe 2.0 capability flags. - smartctl '-g security': Added 'ata_security.master_password_id' to JSON output. Plaintext output shows Master Password ID if set to a non-default value. - smartctl '-q noserial': Now also suppresses the output of NVMe Namespace IEEE EUI-64. - smartctl '-j': '-l error -l selftest' JSON output for NVMe devices. - smartctl '-j': Avoid invalid UTF-8 sequences in JSON/YAML strings. - smartctl '-j': Fixed a bogus exception during SCSI JSON output. - smartctl '-j': Renamed JSON element 'scsi_temperature' back to 'temperature' (regression). - smartctl '-a': Now suggests '-x' for ATA devices because '-a' only provides legacy SMART information. - smartd: No longer issues LOG_CRIT warnings if new entries of NVMe error information log do not indicate device problems. - smartd: Now detects accidental use of smartd_warning script as '-M exec' parameter. - smartd: No longer writes the 'Copyright...' line to syslog. - smartd.conf '-M always': Sends reminder emails without any delay. - smartd.conf '-M diminishing': Limited email delay to 32 days. - ATA: Fixed decoding of extended self-test log on big endian hosts. - ATA: Enhanced LBA range for device types '-d jmb39x-q,...' and '-d jms56x,...' from 33-62 to 1-255. - ATA: Device type '-d intelliprop,N' now fails with a deprecation message. Added '-d intelliprop,N,force' flag to use it anyway. - ATA/USB: Device type '-d usbasm1352r,N' for ASMedia ASM1352R USB to SATA RAID bridges - SCSI: Fixed possible corruption issue with the Error Counter and Non medium Error log pages. - SCSI: Added more "Informational Exceptions" strings. - SCSI: Added initial support for REPORT SUPPORTED OPERATION command. - SCSI: Initial rework of SCSI debug output. - NVMe: Added error messages for NVMe status values. - NVMe: Fixed crash after read of error information log on big endian hosts. - HDD, SSD and USB additions to drive database. - update-smart-drivedb: Fixed syntax for 'sed' versions which require ';' before '}' or do not support ';' at all. - update-smart-drivedb: Replaced a usually not executed bashism. - configure: Default for '--with-nvme-devicescan' is now 'yes' also on Darwin and FreeBSD. It is still 'no' on NetBSD only. - configure: Defines '_FORTIFY_SOURCE=3' if supported and not predefined. - configure: No longer fails if libsystemd-dev is installed and 'LDFLAGS=-static' is used. - Compile fix for systems without legacy 'getdtablesize()'. - Pre-releases from SVN snapshots now show "pre-VERSION" in version information and 'smartctl.pre_release=true' in JSON output. - Linux: Device type '-d sssraid' for 3SNIC RAID controllers. - Linux: Device type '-d marvell' now fails with a deprecation message. Added '-d marvell,force' flag to use it anyway. - Linux: The generic SCSI code now defaults to SG_IO_V3 and does no longer fall back to the deprecated SCSI_IOCTL_SEND_COMMAND (but this ioctl is still used for '-d 3ware' and '-d marvell,force'). - Linux smartd: Now prevents systemd unit startup timeout when many devices are registered and then initially checked. - Linux smartd: Systemd no longer reports a service failure if no device is present and a '-q *nodev0*' option is used. - Solaris SPARC: Dropped legacy ATA support. Dropped configure option '--with-solaris-sparc-ata'. - Windows: IOCTL_STORAGE_PROTOCOL_COMMAND variant for NVMe self-tests. - Windows: Installer now defaults to 64-bit executables. - Windows: No longer prints bogus 'Local Time' if enhanced TZ syntax is used. - Windows: Workaround to keep backward compatibility with old versions of Windows if some versions of MinGW-w64 are used.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- smartmontools/smartmontools.nm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/smartmontools/smartmontools.nm b/smartmontools/smartmontools.nm index c906dcd1b..4c50175bc 100644 --- a/smartmontools/smartmontools.nm +++ b/smartmontools/smartmontools.nm @@ -4,8 +4,8 @@ ###############################################################################
name = smartmontools -version = 7.3 -release = 1.1 +version = 7.4 +release = 1
groups = System/Statistics url = https://www.smartmontools.org