Hello,
On 24 Aug 2024, at 09:33, Matthias Fischer matthias.fischer@ipfire.org wrote:
On 21.08.2024 16:28, Michael Tremer wrote:
Hello Matthias,
Hi Michael,
As you might have seen I played around with this all more… There is either a kernel bug, or a bug in unshare which causes these problems…
So if we mount /proc manually later this works for me on Ubuntu 22.04 LTS:
https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=8ea702f3f853c4c28a28...
However, there are now some packages which don’t want to build any more.
So I would simply suggest to upgrade the kernel on your Ubuntu release like this:
apt install linux-generic-hwe-22.04
Done. Ran without problems.
I'm now on "Linux Devel64-1 6.8.0-40-generic #40~22.04.3-Ubuntu SMP PREEMPT_DYNAMIC..."
That should allow you to build with the stock make.sh again.
Sorry, but no chance...
Today I tested the hint from "siosios" found in https://community.ipfire.org/t/trying-to-build-188/11999/8
Are you referring to this?
mount -o bind ${BUILD_DIR}/proc ${BUILD_DIR}/proc
He put this into an unfortunate place and will mount this over and over and over again... but making the empty directory a mount point is something that would acceptable as a workaround.
If you can confirm, I can add this to the code.
Works. Build is running. I'm building 'clamav 1.4.0' right now.
One glitch I found: the new build still has problems identifying the need for customizing new rootfiles(?).
This might be fixed here:
https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=d7ee801712705c97fda6...
Best Matthias
Best, -Michael
On 16 Aug 2024, at 17:43, Matthias Fischer matthias.fischer@ipfire.org wrote:
On 16.08.2024 17:35, Michael Tremer wrote:
Hello,
Hi,
On 8 Aug 2024, at 13:06, Matthias Fischer matthias.fischer@ipfire.org wrote:
Hi,
ok - please don't laugh.
I did something completely different...
I added the following to 'make.sh':
***SNIP*** diff --git a/make.sh b/make.sh index 922fc4b4c..212256ab1 100755 --- a/make.sh +++ b/make.sh @@ -662,6 +662,11 @@ execute() { # If unshare is asked to terminate, terminate all child processes "--kill-child" )
+mount --bind ${BUILD_DIR}/proc ${BUILD_DIR}/proc
+mount --make-rslave ${BUILD_DIR}/proc
fi
I don’t know why this would fix anything.
I don't know either. If I remove these lines, I get the 'invalid argument' errors again. Immediately.
Could you once again try to swap the slave/private parameters of the —-propagation option for both calls of unshare?
Ok. I'll try and keep you informed, lets see. By the way: "Devel 1" just built 'next' in 3:09:49, updating 'rust 1.80.1' and 'clamav 1.4.0'.
- I commented my two lines above and I get:
... Aug 16 16:34:12: Building stage2 unshare: cannot change /git/ipfire-2.x/build_x86_64/proc filesystem propagation: Invalid argument ...
- I swap slave/private parameters
=> change line 646 to "--propagation=private" and line 2146 to "--propagation=slave" and get the same error: "...Invalid argument"
- I swap parameters back and uncomment my two lines:
=> Build is running again.
Also: Why is this working on my freshly installed system?
Good question...this is something really strange...
while [ $# -gt 0 ]; do ***SNAP***
No 'invalid argument' error anymore.
I don't know why - but with this patch the build is running...
Any comments?
Best Matthias
On 06.08.2024 17:40, Michael Tremer wrote:
Hello,
We should not touch the mount propagation of the host’s namespace.
Instead, we should create our own mount namespace and that should be private.
You can however try to see what happens when you add —-propagation=slave to the first unshare command.
I just installed the plain Ubuntu Server, installed git, checkout out the repository, downloaded the toolchain and ran the build.
-Michael
> On 3 Aug 2024, at 12:22, Matthias Fischer matthias.fischer@ipfire.org wrote: > > On 03.08.2024 10:54, Michael Tremer wrote: >> Hello Matthias, > > Hi Michael, > > just looked through https://man7.org/linux/man-pages/man1/unshare.1.html > and ran 'findmnt -o+PROPAGATION' (see attachment). > > I don't know if this could help but does this differ from your test > installation? > > Best > Matthias > >>> On 3 Aug 2024, at 08:47, Matthias Fischer matthias.fischer@ipfire.org wrote: >>> >>> Hi Michael, >>> >>> [shortened some stuff] >>> >>> ... >>> >>>>>>> >>>>>>> Being curious I tried to build 'next', but I always get the same error: >>>>>>> >>>>>>> ***SNIP*** >>>>>>> root@Devel64-1: /git/ipfire-2.x # ./make.sh build >>>>>>> Packaged toolchain compilation >>>>>>> Building IPFire >>>>>>> stage2 >>>>>>> Jul 26 13:32:59: Building stage2 unshare: cannot change >>>>>>> /git/ipfire-2.x/build_x86_64/proc filesystem propagation: Invalid argument >>> >>>>>> ... >>> >>>> It looks like you can simply update the kernel staying on the same release: >>>> >>>> https://ubuntu.com/security/livepatch/docs/livepatch/reference/kernels >>>> >>>> For 22.04 LTS, there is a Linux 6.8 image available. >>>> >>>> Could you check that and confirm that it fixes the mount propagation problem? >>> >>> Done. >>> >>> Current state is as follows: >>> >>> ***SNIP*** >>> ... >>> root@Devel64-1: /git/ipfire-2.x # lsb_release -a >>> No LSB modules are available. >>> Distributor ID: Ubuntu >>> Description: Ubuntu 22.04.4 LTS >>> Release: 22.04 >>> Codename: jammy >>> ... >>> root@Devel64-1: /git/ipfire-2.x # uname -mrs >>> Linux 6.8.0-39-generic x86_64 >>> ... >>> ***SNAP*** >>> >>> But when I try to build 'next' I get exactly the same error as >>> before: >>> >>> ***SNIP*** >>> root@Devel64-1: /git/ipfire-2.x # ./make.sh build >>> Packaged toolchain compilation >>> Building IPFire >>> stage2 >>> Aug 2 21:21:15: Building stage2 unshare: cannot change >>> /git/ipfire-2.x/build_x86_64/proc filesystem propagation: Invalid argument >> >> Ah, this is good information. So it is not the kernel, it rather is Ubuntu handling something differently. >> >> I will have a look at this and get back to you. >> >>> ERROR: Downloading stage2 >>> [ FAIL ] >>> Check /git/ipfire-2.x/log_x86_64/_build.ipfire.log for errors if >>> applicable [ FAIL ] >>> ***SNAP*** >>> >>> Being curious, I commented line line 633 in 'make.sh' >>> ("--mount-proc=${BUILD_DIR}/proc") => Building starts but fails during >>> 'glib 2.77.0': >>> >>> ***SNIP*** >>> ... >>> glib (2.77.0) >>> [ 1:14 ][0/1011] >>> >>> [951/1374] Compiling C object gio/gio.p/gio-tool-tree.c.o >>> [952/1374] Linking target gio/gio >>> [953/1374] Compiling C object >>> gio/gio-querymodules.p/gio-querymodules.c.o >>> [954/1374] Linking target gio/gio-querymodules >>> [955/1374] Compiling C object gio/gresource.p/gresource-tool.c.o >>> [956/1374] Compiling C object >>> gio/glib-compile-schemas.p/.._subprojects_gvdb_gvdb_gvdb-reader.c.o >>> [957/1374] Linking target gio/gresource >>> [958/1374] Compiling C object >>> gio/glib-compile-schemas.p/.._subprojects_gvdb_gvdb_gvdb-builder.c.o >>> [959/1374] Compiling C object >>> gio/glib-compile-resources.p/.._subprojects_gvdb_gvdb_gvdb-reader.c.o >>> [960/1374] Compiling C object >>> gio/glib-compile-resources.p/.._subprojects_gvdb_gvdb_gvdb-builder.c.o >>> [961/1374] Compiling C object >>> gio/glib-compile-resources.p/glib-compile-resources.c.o >>> [962/1374] Linking target gio/glib-compile-resources >>> [963/1374] Compiling C object >>> gio/tests/modules/libtestmodulea.so.p/test-module-a.c.o >>> [964/1374] Compiling C object gio/gapplication.p/gapplication-tool.c.o >>> [965/1374] Compiling C object gio/gsettings.p/gsettings-tool.c.o >>> [966/1374] Linking target gio/tests/modules/libtestmodulea.so >>> [967/1374] Generating gio/tests/plugin-resources.c with a custom command >>> FAILED: gio/tests/plugin-resources.c >>> /usr/src/glib-2.77.0/builddir/gio/glib-compile-resources >>> --compiler=gcc --target=gio/tests/plugin-resources.c --sour >>> cedir=/usr/src/glib-2.77.0/gio/tests --internal --generate-source >>> --c-name _g_plugin ../gio/tests/test4.gresource.xml >>> /usr/src/glib-2.77.0/builddir/gio/glib-compile-resources: error >>> while loading shared libraries: libgio-2.0.so.0: can >>> not open shared object file: No such file or directory >>> [968/1374] Linking target gio/gapplication >>> [969/1374] Compiling C object >>> gio/glib-compile-schemas.p/glib-compile-schemas.c.o >>> [970/1374] Linking target gio/gsettings >>> [971/1374] Compiling C object >>> gio/tests/modules/libtestmoduleb.so.p/test-module-b.c.o >>> [972/1374] Compiling C object >>> gio/tests/gdbus-overflow.p/gdbus-overflow.c.o >>> [973/1374] Compiling C object gio/gdbus.p/gdbus-tool.c.o >>> [974/1374] Compiling C object >>> gio/tests/gdbus-object-manager-example/libgdbus-example-objectmanager.so.p/meson-gener >>> ated_.._objectmanager-gen.c.o >>> ninja: build stopped: subcommand failed. >>> make: *** [glib:75: /usr/src/log/glib-2.77.0] Error 1 >>> make: Leaving directory '/usr/src/lfs' >>> >>> ERROR: Building glib >>> [ FAIL ] >>> Check /git/ipfire-2.x/log_x86_64/_build.ipfire.log for errors if >>> applicable [ FAIL ] >>> ***SNAP*** >>> >>> Best >>> Matthias