- Update from version 8.9.0 to 8.10.0 - Update of rootfile - Changelog v8.10.0 (2022-12-01) **New features** * Tool for validating SEV firmware boot measurement of QEMU VMs The ``virt-qemu-sev-validate`` program will compare a reported SEV/SEV-ES domain launch measurement, to a computed launch measurement. This determines whether the domain has been tampered with during launch. * Support for SGX EPC (enclave page cache) Users can add a ``<memory model='sgx-epc'>`` device to lauch a VM with ``Intel Software Guard Extensions``. * Support migration of vTPM state of QEMU vms on shared storage Pass ``--migration`` option if appropriate in order for ``swtpm`` to properly migrate on shared storage. **Improvements** * Mark close callback (un-)register API as high priority High priority APIs use a separate thread pool thus can help in eliminating problems with stuck VMs. Marking the close callback API as high priority allows ``virsh`` to properly connect to the daemon in case the normal priority workers are stuck allowing other high priority API usage. * Updated x86 CPU features The following features for the x86 platform were added: ``v-vmsave-vmload``, ``vgif``, ``avx512-vp2intersect``, ``avx512-fp16``, ``serialize``, ``tsx-ldtrk``, ``arch-lbr``, ``xfd``, ``intel-pt-lip``, ``avic``, ``sgx``, ``sgxlc``, ``sgx-exinfo``, ``sgx1``, ``sgx2``, ``sgx-debug``, ``sgx-mode64``, ``sgx-provisionkey``, ``sgx-tokenkey``, ``sgx-kss``, ``bus-lock-detect``, ``pks``, ``amx``. * Add support for ``hv-avic`` Hyper-V enlightenment ``qemu-6.2`` introduced support for the ``hv-avic`` enlightenment which allows to use Hyper-V SynIC with hardware APICv/AVIC enabled. * qemu: Run memory preallocation with numa-pinned threads Run the thread allocating memory in the proper NUMA node to reduce overhead. * RPM packaging changes - add optional dependancy of ``libvirt-daemon`` on ``libvirt-client`` The ``libvirt-guests.`` tool requires the ``virsh`` client to work properly, but we don't want to require the installation of the daemon if the tool is not used. - relax required ``python3-libvirt`` version for ``libvirt-client-qemu`` The ``virt-qemu-qmp-proxy`` tool requires python but doesn't strictly need the newest version. Remove the strict versioning requirement in order to prevent cyclic dependency when building. **Bug fixes** * Skip initialization of ``cache`` capabilities if host doesn't support them Hypervisor drivers would fail to initialize on ``aarch64`` hosts with following error :: virStateInitialize:657 : Initialisation of cloud-hypervisor state driver failed: no error which prevented the startup of the daemon. * Allow incoming connections to guests on routed networks w/firewalld A change in handling of implicit rules in ``firewalld 1.0.0`` broke incomming connections to VMs when using ``routed`` network. This is fixed by adding a new ``libvirt-routed`` zone configured to once again allow incoming sessions to guests on routed networks. * Fix infinite loop in nodedev driver Certain udev entries might be of a size that makes libudev emit EINVAL which caused a busy loop burning CPU. Fix it by ignoring the return code.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/packages/libvirt | 10 ++++++---- lfs/libvirt | 6 +++--- 2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/config/rootfiles/packages/libvirt b/config/rootfiles/packages/libvirt index 5682b73c8..8b3819aa5 100644 --- a/config/rootfiles/packages/libvirt +++ b/config/rootfiles/packages/libvirt @@ -60,6 +60,7 @@ usr/bin/virt-pki-query-dn usr/bin/virt-pki-validate usr/bin/virt-qemu-qmp-proxy usr/bin/virt-qemu-run +usr/bin/virt-qemu-sev-validate usr/bin/virt-ssh-helper usr/bin/virt-xml-validate #usr/include/libvirt @@ -84,16 +85,16 @@ usr/bin/virt-xml-validate #usr/lib/libvirt #usr/lib/libvirt-admin.so usr/lib/libvirt-admin.so.0 -usr/lib/libvirt-admin.so.0.8009.0 +usr/lib/libvirt-admin.so.0.8010.0 #usr/lib/libvirt-lxc.so usr/lib/libvirt-lxc.so.0 -usr/lib/libvirt-lxc.so.0.8009.0 +usr/lib/libvirt-lxc.so.0.8010.0 #usr/lib/libvirt-qemu.so usr/lib/libvirt-qemu.so.0 -usr/lib/libvirt-qemu.so.0.8009.0 +usr/lib/libvirt-qemu.so.0.8010.0 #usr/lib/libvirt.so usr/lib/libvirt.so.0 -usr/lib/libvirt.so.0.8009.0 +usr/lib/libvirt.so.0.8010.0 #usr/lib/libvirt/connection-driver usr/lib/libvirt/connection-driver/libvirt_driver_ch.so usr/lib/libvirt/connection-driver/libvirt_driver_interface.so @@ -317,6 +318,7 @@ usr/share/libvirt/schemas/nodedev.rng usr/share/libvirt/schemas/nwfilter.rng usr/share/libvirt/schemas/nwfilter_params.rng usr/share/libvirt/schemas/nwfilterbinding.rng +usr/share/libvirt/schemas/privatedata.rng usr/share/libvirt/schemas/secret.rng usr/share/libvirt/schemas/storagecommon.rng usr/share/libvirt/schemas/storagepool.rng diff --git a/lfs/libvirt b/lfs/libvirt index aa28ef2dc..bb7abbb28 100644 --- a/lfs/libvirt +++ b/lfs/libvirt @@ -26,7 +26,7 @@ include Config
SUMMARY = Server side daemon and supporting files for libvirt
-VER = 8.9.0 +VER = 8.10.0
THISAPP = libvirt-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -35,7 +35,7 @@ DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) SUP_ARCH = x86_64 aarch64 PROG = libvirt -PAK_VER = 30 +PAK_VER = 31
DEPS = ebtables libpciaccess libtirpc libyajl ncat qemu
@@ -49,7 +49,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 537b6badb6171110e99561613fb1318144991107139401296248afb747ae6f9cfafcd17b2292b8d8dcc9188ff4206035ea814efa6c129bae50c0518f61be9b81 +$(DL_FILE)_BLAKE2 = 6c99428dd74ae1e535d0918bb48da0a851b03e9dfc38f96fca060a33b6be6c23c8b4a789695e8cf930536c156c8a893e18753a58c8a827f464b83a61b47c4846
install : $(TARGET) check : $(patsubst %,$(DIR_CHK)/%,$(objects))