Hi Jon,
On 31/03/2022 20:22, Jon Murphy wrote:
Adolf,
Might this issue be part of the overall issue? I am wondering if it was tested in the special release build?
https://bugzilla.ipfire.org/show_bug.cgi?id=12811 https://bugzilla.ipfire.org/show_bug.cgi?id=12811
I don't believe so. That bug already had a fix submitted into CU166 before bug 12817 had a fix for the broken globbing expansion and I did a quick test when CU166 was still very early on and it seemed to work OK.
This current bug 12817 regarding globbing expansion is to do with not finding the files to be backed up.
Bug 12811 is to do with the restore process and not the backup. After the files have been restored from the backup the backup.pl routine was not able to find some of the misc programs used to restart various things in IPFire after the restore. The fix was a modified default patch to include the location where those misc progs are located.
Having said all the above, I could also be wrong. Maybe someone else can say if my analysis is right or flawed.
Regards,
Adolf.
Jon
On Mar 31, 2022, at 5:16 AM, Adolf Belka <adolf.belka@ipfire.org mailto:adolf.belka@ipfire.org> wrote:
Hi Michael,
Update on the testing. I realised that I had done the test on a CU175 version where I had modified the backup.pl code with pushd/popd. I wouldn't expect that to give a problem but to confirm I created another CU165 clone with the backup.pl code in original form as most standard users would have it. Re-ran the test and everything went correctly the same as my previous test.
Just for security I also did a fresh install of CU166 from the latest master nightly. That also worked fine. The backup had all the directories as expected.
Regards, Adolf
On 31/03/2022 09:46, Michael Tremer wrote:
Hello Adolf, Brilliant. Thank you very much for testing this in detail. Best, -Michael
On 31 Mar 2022, at 08:41, Adolf Belka <adolf.belka@ipfire.org mailto:adolf.belka@ipfire.org> wrote:
Hi Michael,
On 30/03/2022 23:20, Adolf Belka wrote:
Hi,
On 30/03/2022 17:05, Michael Tremer wrote:
Hello Bernhard,
You are obviously right. My brain is absolute mush these days and doesn’t allow me to function.
I will correct this by the end of the day.
-Michael
> On 30 Mar 2022, at 15:38, Bernhard Bitsch <bbitsch@ipfire.org > mailto:bbitsch@ipfire.org> wrote: > > Hello all, > > > Am 30.03.2022 um 16:06 schrieb Michael Tremer: >> Hello everyone, >> Thank you very much for helping me test this. >> I decided that we will have to create an emergency core update >> for this, because it will otherwise break people’s system. We >> also have a vulnerability in zlib which is being handed around >> by the press, so that has helped me to make a decision. > > I think this is a good solution. Shall we add a warning to backup > wiki page? Because in the moment a backup -> reinstall -> restore > process leaves an incomplete system. > >> I also pushed two more patches. One filters out any empty lines >> because they have quite a damaging effect and it happens easily >> that they are added to the include list. Secondly, I brought >> back the existence check which I thought was only there for the >> globbing mechanism, but also had the small side-effect of >> filtering out the file list early on which helps keeping tar happy. >> Please review those changes and please install the new c166 from >> testing as soon as the build has finished (I am not sure if you >> are all on the nightly-builds list to see any notifications).
I am not on the notifications list but I will check first thing tomorrow and when the latest has been updated I will do a test install and evaluation of the backup and provide confirmation of how it functions.
As CU166 has been moved to master I took a clone of my CU165 vm and then did a CU on Testing with it rather than doing a fresh install. If you would also want a test of a fresh install done I can also do that.
The version I tested was IPFire 2.27 (x86_64) - Core Update 166 Development Build: master/8f696f60
Anyway the backup is working fine again. All the directories are present. The size of the backup is now very similar to previously also confirming all contents should be good.
I also added back in a couple of blank lines into my include.user file and the backup worked without any problems.
I also did a restore of the backup and again as far as I can tell with a quick check through on my testbed, everything is fine.
So everything looks good to me.
Regards,
Adolf.
Regards, Adolf.
>> https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=4f0e7f24f293ca10096e... >> https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=4f0e7f24f293ca10096e616010cfd4417afc157c > The test on empty string should be in the 'while read -r file' > loop. The empty lines are in the include files. The outer for > loop iterates over the file list. > > Regards, > Bernhard > >> https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=b275771fdd10ac7116e5... >> https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=b275771fdd10ac7116e5d400dc10d3148df8ac27 >> Best, >> -Michael >>> On 29 Mar 2022, at 20:21, Bernhard Bitsch bbitsch@ipfire.org >>> wrote: >>> >>> Just checked the blank line problem. >>> Pattern is empty , file name list is '/' --> no names produced >>> ( with existence check ) >>> Pattern is empty --> produced file name '/' ( without -e check ) >>> >>> Am 29.03.2022 um 20:36 schrieb Bernhard Bitsch: >>>> Hi all, >>>> Am 29.03.2022 um 17:23 schrieb Adolf Belka: >>>>> Hi All, >>>>> >>>>> On 29/03/2022 16:22, Michael Tremer wrote: >>>>>> >>>>>>> On 29 Mar 2022, at 15:22, Bernhard Bitsch >>>>>>> bbitsch@ipfire.org wrote: >>>>>>> >>>>>>> Looks like your include.user file contains absolute paths. >>>>> That was not the problem but I have corrected that. I would >>>>> have expected that when the main include and exclude files >>>>> were made relative that the update script would also have >>>>> checked for any entries in the include.user and exclude.user >>>>> files but it looks like it didn't.th >>>> According to the source they are chosen. >>>>>> >>>>>> Or an empty line maybe? >>>>> That turned out to be the problem. There was an empty line >>>>> after the two lines I had added. You only saw it if you >>>>> scrolled the pointer down the file in the editor. >>>> Interesting. A blank line should produce nothing. >>>>> >>>>> Removing that blank line removed the line only with a / and >>>>> the backup then successfully ran and created a backup file >>>>> containing all the directories expected. >>>>> >>>>> The only thing I found is that there was the following tar >>>>> error message >>>>> >>>>> tar: Exiting with failure status due to previous errors >>>>> >>>>> The only thing I found in the backup output was several lines >>>>> such as >>>>> >>>>> tar: /etc/squid/squid.conf.local: Cannot stat: No such file >>>>> or directory >>>>> tar: /etc/squid/squid.conf.pre.local: Cannot stat: No such >>>>> file or directory >>>>> >>>>> There were seven lines in total like this and the three I >>>>> checked were files that did not exist on my system. I presume >>>>> that these are files that should be backed up if present but >>>>> don't have to be present so that the error messages are >>>>> nothing to worry about. >>>>> There were no error messages when doing the backup via the WUI. >>>>> >>>> Good find. ;) >>>> Michael's patch removes the test of existence, globbing >>>> produces existent file names only. But I suppose there are >>>> several full names of files, not existing in each implementation. >>>> Conclusion: Repair the file globbing by the shopt and do the >>>> existence check. So all existent files are chosen, that are >>>> listed in the include files. >>>> Regards, >>>> Bernhard >>>>> The blank line was only on my vm testbed system but as I >>>>> clone this for any testing activities I will have to check >>>>> all of my existing vm's to fix this. >>>>> >>>>> Glad we resolved this simply. Sorry for the anxiety. >>>>> >>>>> Regards, >>>>> >>>>> Adolf. >>>>> >>>>>> >>>>>>> >>>>>>> Am 29.03.2022 um 16:14 schrieb Adolf Belka: >>>>>>>> Hi All, >>>>>>>> This is what I get with the pushd/popd version in place on >>>>>>>> the same system >>>>>>>> -bash-5.1$ sudo /var/ipfire/backup/bin/backup.pl list >>>>>>>> etc/group >>>>>>>> etc/hosts >>>>>>>> etc/hosts.allow >>>>>>>> etc/hosts.deny >>>>>>>> etc/httpd/server.crt >>>>>>>> etc/httpd/server.csr >>>>>>>> etc/httpd/server-ecdsa.crt >>>>>>>> etc/httpd/server-ecdsa.csr >>>>>>>> etc/httpd/server-ecdsa.key >>>>>>>> etc/httpd/server.key >>>>>>>> etc/ipsec.user.conf >>>>>>>> etc/ipsec.user.secrets >>>>>>>> etc/logrotate.d >>>>>>>> etc/passwd >>>>>>>> etc/shadow >>>>>>>> etc/ssh/sshd_config >>>>>>>> etc/ssh/ssh_host_ecdsa_key >>>>>>>> etc/ssh/ssh_host_ecdsa_key.pub >>>>>>>> etc/ssh/ssh_host_ed25519_key >>>>>>>> etc/ssh/ssh_host_ed25519_key.pub >>>>>>>> etc/ssh/ssh_host_rsa_key >>>>>>>> etc/ssh/ssh_host_rsa_key.pub >>>>>>>> /etc/sudoers >>>>>>>> etc/sysconfig/createfiles >>>>>>>> etc/sysconfig/firewall.local >>>>>>>> etc/sysconfig/lm_sensors >>>>>>>> etc/sysconfig/modules >>>>>>>> etc/sysconfig/ramdisk >>>>>>>> etc/sysconfig/rc >>>>>>>> etc/sysconfig/rc.local >>>>>>>> etc/unbound >>>>>>>> /home/ahb >>>>>>>> root/.bash_history >>>>>>>> var/ipfire/accounting/settings.conf >>>>>>>> var/ipfire/auth/users >>>>>>>> var/ipfire/backup/addons/backup >>>>>>>> var/ipfire/backup/exclude.user >>>>>>>> var/ipfire/backup/include.user >>>>>>>> var/ipfire/ca/cacert.pem >>>>>>>> var/ipfire/captive/agb.txt >>>>>>>> var/ipfire/captive/clients >>>>>>>> var/ipfire/captive/coupons >>>>>>>> var/ipfire/captive/logo.dat >>>>>>>> var/ipfire/captive/settings >>>>>>>> var/ipfire/captive/terms.txt >>>>>>>> var/ipfire/captive/voucher_out >>>>>>>> var/ipfire/certs/hostcert.pem >>>>>>>> var/ipfire/certs/hostkey.pem >>>>>>>> var/ipfire/certs/phoebevmipseccert.pem >>>>>>>> var/ipfire/connscheduler/connscheduler.conf >>>>>>>> var/ipfire/crls/cacrl.pem >>>>>>>> var/ipfire/cups/cups-browsed.conf >>>>>>>> var/ipfire/cups/subscriptions.conf >>>>>>>> var/ipfire/ddns/config >>>>>>>> var/ipfire/ddns/ddns.conf >>>>>>>> var/ipfire/ddns/settings >>>>>>>> var/ipfire/dhcp/advoptions >>>>>>>> var/ipfire/dhcp/advoptions-list >>>>>>>> var/ipfire/dhcpc/dhcpcd.conf >>>>>>>> var/ipfire/dhcp/dhcpd.conf >>>>>>>> var/ipfire/dhcp/dhcpd.conf.local >>>>>>>> var/ipfire/dhcp/enable_blue >>>>>>>> var/ipfire/dhcp/enable_green >>>>>>>> var/ipfire/dhcp/fixleases >>>>>>>> var/ipfire/dhcp/settings >>>>>>>> var/ipfire/dma/auth.conf >>>>>>>> var/ipfire/dma/dma.conf >>>>>>>> var/ipfire/dma/mail.conf >>>>>>>> var/ipfire/dns >>>>>>>> var/ipfire/dnsforward/config >>>>>>>> var/ipfire/dns/settings >>>>>>>> var/ipfire/ethernet/aliases >>>>>>>> var/ipfire/ethernet/settings >>>>>>>> var/ipfire/ethernet/wireless >>>>>>>> var/ipfire/extrahd/settings >>>>>>>> var/ipfire/firewall >>>>>>>> var/ipfire/firewall/config >>>>>>>> var/ipfire/firewall/settings >>>>>>>> var/ipfire/fwhosts >>>>>>>> var/ipfire/isdn/settings >>>>>>>> var/ipfire/logging/settings >>>>>>>> var/ipfire/mac/settings >>>>>>>> var/ipfire/main/firstsetup_ok >>>>>>>> var/ipfire/main/gpl_accepted >>>>>>>> var/ipfire/main/hostname.conf >>>>>>>> var/ipfire/main/hosts >>>>>>>> var/ipfire/main/manualpages >>>>>>>> var/ipfire/main/routing >>>>>>>> var/ipfire/main/security >>>>>>>> var/ipfire/main/send_profile >>>>>>>> var/ipfire/main/settings >>>>>>>> var/ipfire/modem/settings >>>>>>>> var/ipfire/optionsfw/settings >>>>>>>> var/ipfire/ovpn >>>>>>>> var/ipfire/ovpn/ccd.conf >>>>>>>> var/ipfire/ovpn/collectd.vpn >>>>>>>> var/ipfire/ovpn/enable >>>>>>>> var/ipfire/ovpn/server.conf >>>>>>>> var/ipfire/ovpn/settings >>>>>>>> var/ipfire/pakfire/settings >>>>>>>> var/ipfire/ppp >>>>>>>> var/ipfire/ppp/fake-resolv.conf >>>>>>>> var/ipfire/ppp/settings >>>>>>>> var/ipfire/private/cakey.pem >>>>>>>> var/ipfire/proxy >>>>>>>> var/ipfire/proxy/asnbl-helper.conf >>>>>>>> var/ipfire/proxy/cachemgr.conf >>>>>>>> var/ipfire/proxy/enable >>>>>>>> var/ipfire/proxy/settings >>>>>>>> var/ipfire/proxy/squid.conf >>>>>>>> var/ipfire/qos/bin >>>>>>>> var/ipfire/qos/classes >>>>>>>> var/ipfire/qos/level7config >>>>>>>> var/ipfire/qos/portconfig >>>>>>>> var/ipfire/qos/settings >>>>>>>> var/ipfire/qos/subclasses >>>>>>>> var/ipfire/qos/tosconfig >>>>>>>> var/ipfire/remote/enablessh >>>>>>>> var/ipfire/remote/settings >>>>>>>> var/ipfire/sensors/settings >>>>>>>> var/ipfire/suricata/oinkmaster.conf >>>>>>>> var/ipfire/suricata/oinkmaster-modify-sids.conf >>>>>>>> var/ipfire/suricata/oinkmaster-provider-includes.conf >>>>>>>> var/ipfire/suricata/providers-settings >>>>>>>> var/ipfire/suricata/settings >>>>>>>> var/ipfire/suricata/suricata-default-rules.yaml >>>>>>>> var/ipfire/suricata/suricata-dns-servers.yaml >>>>>>>> var/ipfire/suricata/suricata-emerging-used-rulefiles.yaml >>>>>>>> var/ipfire/suricata/suricata-homenet.yaml >>>>>>>> var/ipfire/suricata/suricata-http-ports.yaml >>>>>>>> var/ipfire/suricata/suricata-sslbl_blacklist-used-rulefiles.yaml >>>>>>>> var/ipfire/suricata/suricata-used-providers.yaml >>>>>>>> var/ipfire/time/ >>>>>>>> var/ipfire/time/counter.conf >>>>>>>> var/ipfire/time/enable >>>>>>>> var/ipfire/time/settime.conf >>>>>>>> var/ipfire/time/settings >>>>>>>> var/ipfire/upnp/settings >>>>>>>> var/ipfire/urlfilter >>>>>>>> var/ipfire/urlfilter/settings >>>>>>>> var/ipfire/urlfilter/squidGuard.conf >>>>>>>> var/ipfire/vpn >>>>>>>> var/ipfire/vpn/config >>>>>>>> var/ipfire/vpn/ipsec.conf >>>>>>>> var/ipfire/vpn/settings >>>>>>>> var/ipfire/wakeonlan/clients.conf >>>>>>>> var/ipfire/wio/wio.conf >>>>>>>> var/ipfire/wireless/config >>>>>>>> var/ipfire/wireless/settings >>>>>>>> var/lib/suricata >>>>>>>> var/log/rrd/collectd >>>>>>>> var/log/rrd/hddshutdown-md127.rrd >>>>>>>> var/log/rrd/hddshutdown-sda.rrd >>>>>>>> var/log/rrd/hddshutdown-sdb.rrd >>>>>>>> var/log/rrd/hddtemp-md127.rrd >>>>>>>> var/log/rrd/hddtemp-sda.rrd >>>>>>>> var/log/rrd/hddtemp-sdb.rrd >>>>>>>> var/log/rrd/wio >>>>>>>> var/log/vnstat >>>>>>>> var/tmp/idsrules-emerging.tar.gz >>>>>>>> var/tmp/idsrules-sslbl_blacklist.rules >>>>>>>> The following are in the previous list but not in this one:- >>>>>>>> / >>>>>>>> /etc/conntrackd/conntrackd.conf >>>>>>>> /etc/ipsec.user-post.conf >>>>>>>> /root/.gitconfig >>>>>>>> /root/.ssh >>>>>>>> Regards, >>>>>>>> Adolf. >>>>>>>> On 29/03/2022 16:01, Adolf Belka wrote: >>>>>>>>> Hi All, >>>>>>>>> >>>>>>>>> On 29/03/2022 15:36, Bernhard Bitsch wrote: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> Am 29.03.2022 um 15:11 schrieb Michael Tremer: >>>>>>>>>>> Hello, >>>>>>>>>>> >>>>>>>>>>> Could you please send the file listing to find out what >>>>>>>>>>> is being included what shouldn’t? >>>>>>>>> Unfortunately, as I stopped the backup continuing once it >>>>>>>>> had reached 1.2GB, the file created was not able to be >>>>>>>>> opened. Probably stopping the backup corrupted it in some >>>>>>>>> way. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Just for easy quick handling, you can use >>>>>>>>>> '/var/ipfire/backup/bin/backup.pl list' to show the >>>>>>>>>> files included. >>>>>>>>> I gave this a go and here is the output from the command. >>>>>>>>> >>>>>>>>> -bash-5.1$ sudo /var/ipfire/backup/bin/backup.pl list >>>>>>>>> / >>>>>>>>> /etc/conntrackd/conntrackd.conf >>>>>>>>> /etc/group >>>>>>>>> /etc/hosts >>>>>>>>> /etc/hosts.allow >>>>>>>>> /etc/hosts.deny >>>>>>>>> /etc/httpd/server.crt >>>>>>>>> /etc/httpd/server.csr >>>>>>>>> /etc/httpd/server-ecdsa.crt >>>>>>>>> /etc/httpd/server-ecdsa.csr >>>>>>>>> /etc/httpd/server-ecdsa.key >>>>>>>>> /etc/httpd/server.key >>>>>>>>> /etc/ipsec.user.conf >>>>>>>>> /etc/ipsec.user-post.conf >>>>>>>>> /etc/ipsec.user.secrets >>>>>>>>> /etc/logrotate.d >>>>>>>>> /etc/passwd >>>>>>>>> /etc/shadow >>>>>>>>> /etc/squid/squid.conf.local >>>>>>>>> /etc/squid/squid.conf.pre.local >>>>>>>>> /etc/ssh/sshd_config >>>>>>>>> /etc/ssh/ssh_host_ecdsa_key >>>>>>>>> /etc/ssh/ssh_host_ecdsa_key.pub >>>>>>>>> /etc/ssh/ssh_host_ed25519_key >>>>>>>>> /etc/ssh/ssh_host_ed25519_key.pub >>>>>>>>> /etc/ssh/ssh_host_rsa_key >>>>>>>>> /etc/ssh/ssh_host_rsa_key.pub >>>>>>>>> //etc/sudoers >>>>>>>>> /etc/sysconfig/createfiles >>>>>>>>> /etc/sysconfig/firewall.local >>>>>>>>> /etc/sysconfig/lm_sensors >>>>>>>>> /etc/sysconfig/modules >>>>>>>>> /etc/sysconfig/ramdisk >>>>>>>>> /etc/sysconfig/rc >>>>>>>>> /etc/sysconfig/rc.local >>>>>>>>> /etc/unbound >>>>>>>>> //home/ahb >>>>>>>>> /root/.bash_history >>>>>>>>> /root/.gitconfig >>>>>>>>> /root/.ssh >>>>>>>>> /var/ipfire/accounting/settings.conf >>>>>>>>> /var/ipfire/auth/users >>>>>>>>> /var/ipfire/backup/addons/backup >>>>>>>>> /var/ipfire/backup/exclude.user >>>>>>>>> /var/ipfire/backup/include.user >>>>>>>>> /var/ipfire/ca/cacert.pem >>>>>>>>> /var/ipfire/captive/agb.txt >>>>>>>>> /var/ipfire/captive/clients >>>>>>>>> /var/ipfire/captive/coupons >>>>>>>>> /var/ipfire/captive/logo.dat >>>>>>>>> /var/ipfire/captive/settings >>>>>>>>> /var/ipfire/captive/terms.txt >>>>>>>>> /var/ipfire/captive/voucher_out >>>>>>>>> /var/ipfire/certs/hostcert.pem >>>>>>>>> /var/ipfire/certs/hostkey.pem >>>>>>>>> /var/ipfire/certs/phoebevmipseccert.pem >>>>>>>>> /var/ipfire/connscheduler/connscheduler.conf >>>>>>>>> /var/ipfire/crls/cacrl.pem >>>>>>>>> /var/ipfire/cups/cups-browsed.conf >>>>>>>>> /var/ipfire/cups/subscriptions.conf >>>>>>>>> /var/ipfire/ddns/config >>>>>>>>> /var/ipfire/ddns/ddns.conf >>>>>>>>> /var/ipfire/ddns/settings >>>>>>>>> /var/ipfire/dhcp/advoptions >>>>>>>>> /var/ipfire/dhcp/advoptions-list >>>>>>>>> /var/ipfire/dhcpc/dhcpcd.conf >>>>>>>>> /var/ipfire/dhcp/dhcpd.conf >>>>>>>>> /var/ipfire/dhcp/dhcpd.conf.local >>>>>>>>> /var/ipfire/dhcp/enable_blue >>>>>>>>> /var/ipfire/dhcp/enable_green >>>>>>>>> /var/ipfire/dhcp/fixleases >>>>>>>>> /var/ipfire/dhcp/settings >>>>>>>>> /var/ipfire/dma/auth.conf >>>>>>>>> /var/ipfire/dma/dma.conf >>>>>>>>> /var/ipfire/dma/mail.conf >>>>>>>>> /var/ipfire/dns >>>>>>>>> /var/ipfire/dnsforward/config >>>>>>>>> /var/ipfire/dns/settings >>>>>>>>> /var/ipfire/ethernet/aliases >>>>>>>>> /var/ipfire/ethernet/settings >>>>>>>>> /var/ipfire/ethernet/wireless >>>>>>>>> /var/ipfire/extrahd/settings >>>>>>>>> /var/ipfire/firewall >>>>>>>>> /var/ipfire/firewall/config >>>>>>>>> /var/ipfire/firewall/settings >>>>>>>>> /var/ipfire/fwhosts >>>>>>>>> /var/ipfire/isdn/settings >>>>>>>>> /var/ipfire/logging/settings >>>>>>>>> /var/ipfire/mac/settings >>>>>>>>> /var/ipfire/main/firstsetup_ok >>>>>>>>> /var/ipfire/main/gpl_accepted >>>>>>>>> /var/ipfire/main/hostname.conf >>>>>>>>> /var/ipfire/main/hosts >>>>>>>>> /var/ipfire/main/manualpages >>>>>>>>> /var/ipfire/main/routing >>>>>>>>> /var/ipfire/main/security >>>>>>>>> /var/ipfire/main/send_profile >>>>>>>>> /var/ipfire/main/settings >>>>>>>>> /var/ipfire/modem/settings >>>>>>>>> /var/ipfire/optionsfw/settings >>>>>>>>> /var/ipfire/ovpn >>>>>>>>> /var/ipfire/ovpn/ccd.conf >>>>>>>>> /var/ipfire/ovpn/collectd.vpn >>>>>>>>> /var/ipfire/ovpn/enable >>>>>>>>> /var/ipfire/ovpn/server.conf >>>>>>>>> /var/ipfire/ovpn/settings >>>>>>>>> /var/ipfire/pakfire/settings >>>>>>>>> /var/ipfire/ppp >>>>>>>>> /var/ipfire/ppp/fake-resolv.conf >>>>>>>>> /var/ipfire/ppp/settings >>>>>>>>> /var/ipfire/private/cakey.pem >>>>>>>>> /var/ipfire/proxy >>>>>>>>> /var/ipfire/proxy/asnbl-helper.conf >>>>>>>>> /var/ipfire/proxy/cachemgr.conf >>>>>>>>> /var/ipfire/proxy/enable >>>>>>>>> /var/ipfire/proxy/settings >>>>>>>>> /var/ipfire/proxy/squid.conf >>>>>>>>> /var/ipfire/qos/bin >>>>>>>>> /var/ipfire/qos/bin/qos.sh >>>>>>>>> /var/ipfire/qos/classes >>>>>>>>> /var/ipfire/qos/level7config >>>>>>>>> /var/ipfire/qos/portconfig >>>>>>>>> /var/ipfire/qos/settings >>>>>>>>> /var/ipfire/qos/subclasses >>>>>>>>> /var/ipfire/qos/tosconfig >>>>>>>>> /var/ipfire/remote/enablessh >>>>>>>>> /var/ipfire/remote/settings >>>>>>>>> /var/ipfire/sensors/settings >>>>>>>>> /var/ipfire/suricata/oinkmaster.conf >>>>>>>>> /var/ipfire/suricata/oinkmaster-modify-sids.conf >>>>>>>>> /var/ipfire/suricata/oinkmaster-provider-includes.conf >>>>>>>>> /var/ipfire/suricata/providers-settings >>>>>>>>> /var/ipfire/suricata/settings >>>>>>>>> /var/ipfire/suricata/suricata-default-rules.yaml >>>>>>>>> /var/ipfire/suricata/suricata-dns-servers.yaml >>>>>>>>> /var/ipfire/suricata/suricata-emerging-used-rulefiles.yaml >>>>>>>>> /var/ipfire/suricata/suricata-homenet.yaml >>>>>>>>> /var/ipfire/suricata/suricata-http-ports.yaml >>>>>>>>> /var/ipfire/suricata/suricata-sslbl_blacklist-used-rulefiles.yaml >>>>>>>>> /var/ipfire/suricata/suricata-used-providers.yaml >>>>>>>>> /var/ipfire/time/ >>>>>>>>> /var/ipfire/time/counter.conf >>>>>>>>> /var/ipfire/time/enable >>>>>>>>> /var/ipfire/time/settime.conf >>>>>>>>> /var/ipfire/time/settings >>>>>>>>> /var/ipfire/upnp/settings >>>>>>>>> /var/ipfire/urlfilter >>>>>>>>> /var/ipfire/urlfilter/settings >>>>>>>>> /var/ipfire/urlfilter/squidGuard.conf >>>>>>>>> /var/ipfire/vpn >>>>>>>>> /var/ipfire/vpn/config >>>>>>>>> /var/ipfire/vpn/ipsec.conf >>>>>>>>> /var/ipfire/vpn/settings >>>>>>>>> /var/ipfire/wakeonlan/clients.conf >>>>>>>>> /var/ipfire/wio/wio.conf >>>>>>>>> /var/ipfire/wireless/config >>>>>>>>> /var/ipfire/wireless/settings >>>>>>>>> /var/lib/suricata >>>>>>>>> /var/log/rrd/collectd >>>>>>>>> /var/log/rrd/hddshutdown-md127.rrd >>>>>>>>> /var/log/rrd/hddshutdown-sda.rrd >>>>>>>>> /var/log/rrd/hddshutdown-sdb.rrd >>>>>>>>> /var/log/rrd/hddtemp-md127.rrd >>>>>>>>> /var/log/rrd/hddtemp-sda.rrd >>>>>>>>> /var/log/rrd/hddtemp-sdb.rrd >>>>>>>>> /var/log/rrd/wio >>>>>>>>> /var/log/vnstat >>>>>>>>> /var/tmp/idsrules-emerging.tar.gz >>>>>>>>> /var/tmp/idsrules-sslbl_blacklist.rules >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Adolf. >>>>>>>>>> >>>>>>>>>> Bernhard >>>>>>>>>>> -Michael >>>>>>>>>>> >>>>>>>>>>>> On 29 Mar 2022, at 14:10, Adolf Belka >>>>>>>>>>>> adolf.belka@ipfire.org wrote: >>>>>>>>>>>> >>>>>>>>>>>> Hi Michael, >>>>>>>>>>>> >>>>>>>>>>>> Just tried this patch out on my vm testbed system and >>>>>>>>>>>> it still doesn't work for me. The backup file had got >>>>>>>>>>>> to 1.3GB when I deleted the backup file as it was >>>>>>>>>>>> still growing. The normal correct backup file on that >>>>>>>>>>>> vm machine is around 7MB >>>>>>>>>>>> >>>>>>>>>>>> The above was the case for both running it from the >>>>>>>>>>>> WUI or from the command line from my unprivileged user >>>>>>>>>>>> using sudo backupctrl exclude >>>>>>>>>>>> >>>>>>>>>>>> Regards, >>>>>>>>>>>> >>>>>>>>>>>> Adolf. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 29/03/2022 14:27, Michael Tremer wrote: >>>>>>>>>>>>> This patch fixes globbing expansion in the backup >>>>>>>>>>>>> include file list >>>>>>>>>>>>> which got broken in >>>>>>>>>>>>> c7e0d73e7cfd7be95db9d0a5f3392b8241813d5b. >>>>>>>>>>>>> >>>>>>>>>>>>> Signed-off-by: Michael Tremer michael.tremer@ipfire.org >>>>>>>>>>>>> --- >>>>>>>>>>>>> config/backup/backup.pl | 8 ++++---- >>>>>>>>>>>>> 1 file changed, 4 insertions(+), 4 deletions(-) >>>>>>>>>>>>> >>>>>>>>>>>>> diff --git a/config/backup/backup.pl >>>>>>>>>>>>> b/config/backup/backup.pl >>>>>>>>>>>>> index a2337cf23..6f9295e94 100644 >>>>>>>>>>>>> --- a/config/backup/backup.pl >>>>>>>>>>>>> +++ b/config/backup/backup.pl >>>>>>>>>>>>> @@ -19,6 +19,8 @@ >>>>>>>>>>>>> # # >>>>>>>>>>>>> ############################################################################### >>>>>>>>>>>>> +shopt -s nullglob >>>>>>>>>>>>> + >>>>>>>>>>>>> NOW="$(date "+%Y-%m-%d-%H:%M")" >>>>>>>>>>>>> list_addons() { >>>>>>>>>>>>> @@ -38,10 +40,8 @@ process_includes() { >>>>>>>>>>>>> for include in $@; do >>>>>>>>>>>>> local file >>>>>>>>>>>>> while read -r file; do >>>>>>>>>>>>> - for file in ${file}; do >>>>>>>>>>>>> - if [ -e "/${file}" ]; then >>>>>>>>>>>>> - echo "${file}" >>>>>>>>>>>>> - fi >>>>>>>>>>>>> + for file in /${file}; do >>>>>>>>>>>>> + echo "${file}" >>>>>>>>>>>>> done >>>>>>>>>>>>> done < "${include}" >>>>>>>>>>>>> done | sort -u