Hello, Would it be a good ideea to add root.servers in the CUSTOMINPUT and CUSTOMFORWARD chains, acction ACCEPT just in case that somebody uses the GeoIP feature and blocks the countries where these servers resides?
Ex: I just blocked Japan and Sweden in my Internet facing IPFire and rest IPFire boxes that uses it tries to access all ROOT Servers and can't reach the ones from blocked countries. First line is m.root-servers.net located in Japan and second line is i.root-servers.net located in Sweden:
Jul 29 22:16:27 internet_ipfire kernel: FORWARDFW IN=green0 OUT=ppp0 MAC=*************** SRC=a.b.c.d DST=202.12.27.33 LEN=75 TOS=0x00 PREC=0x00 TTL=63 ID=966 PROTO=UDP SPT=58062 DPT=53 LEN=55 Jul 29 22:16:27 internet_ipfire kernel: FORWARDFW IN=green0 OUT=ppp0 MAC=*************** SRC=a.b.c.d DST=192.36.148.17 LEN=75 TOS=0x00 PREC=0x00 TTL=63 ID=3289 PROTO=UDP SPT=30228 DPT=53 LEN=55
Horace
Sent: Monday, July 29, 2019 at 11:00 PM From: "Peter Müller" peter.mueller@ipfire.org To: "IPFire: Development-List" development@lists.ipfire.org Subject: [PATCH] firewall: raise log rate limit to 10 packets per second
Previous setting was to log 10 packets per minute for each event logging is turned on. This made debugging much harder, as the limit was rather strict and chances of dropping a packet without logging it were good.
This patch changes the log rate limit to 10 packets per second per event, to avoid DoS attacks against the log file. I plan to drop log rate limit entirely in future changes, if a better solution for this attack vector is available.
Signed-off-by: Peter Müller peter.mueller@ipfire.org Cc: Tim FitzGeorge ipfr@tfitzgeorge.me.uk Cc: Michael Tremer michael.tremer@ipfire.org
config/rootfiles/core/135/filelists/files | 1 + src/initscripts/system/firewall | 14 +++++++------- 2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/config/rootfiles/core/135/filelists/files b/config/rootfiles/core/135/filelists/files index d8df9f65b..e5943ddc0 100644 --- a/config/rootfiles/core/135/filelists/files +++ b/config/rootfiles/core/135/filelists/files @@ -5,6 +5,7 @@ var/ipfire/langs etc/unbound/root.hints etc/rc.d/helper/azure-setup etc/rc.d/init.d/cloud-init +etc/rc.d/init.d/firewall etc/rc.d/init.d/functions etc/rc.d/init.d/networking/red.down/05-remove-dns-forwarders etc/rc.d/init.d/partresize diff --git a/src/initscripts/system/firewall b/src/initscripts/system/firewall index b3483a744..ec396c708 100644 --- a/src/initscripts/system/firewall +++ b/src/initscripts/system/firewall @@ -34,20 +34,20 @@ iptables_init() {
# Empty LOG_DROP and LOG_REJECT chains iptables -N LOG_DROP
- iptables -A LOG_DROP -m limit --limit 10/minute -j LOG
- iptables -A LOG_DROP -m limit --limit 10/second -j LOG iptables -A LOG_DROP -j DROP iptables -N LOG_REJECT
- iptables -A LOG_REJECT -m limit --limit 10/minute -j LOG
iptables -A LOG_REJECT -m limit --limit 10/second -j LOG iptables -A LOG_REJECT -j REJECT
# This chain will log, then DROPs packets with certain bad combinations # of flags might indicate a port-scan attempt (xmas, null, etc) iptables -N PSCAN if [ "$DROPPORTSCAN" == "on" ]; then
iptables -A PSCAN -p tcp -m limit --limit 10/minute -j LOG --log-prefix "DROP_TCP Scan " -m comment --comment "DROP_TCP PScan"iptables -A PSCAN -p udp -m limit --limit 10/minute -j LOG --log-prefix "DROP_UDP Scan " -m comment --comment "DROP_UDP PScan"iptables -A PSCAN -p icmp -m limit --limit 10/minute -j LOG --log-prefix "DROP_ICMP Scan " -m comment --comment "DROP_ICMP PScan"iptables -A PSCAN -f -m limit --limit 10/minute -j LOG --log-prefix "DROP_FRAG Scan " -m comment --comment "DROP_FRAG PScan"
iptables -A PSCAN -p tcp -m limit --limit 10/second -j LOG --log-prefix "DROP_TCP Scan " -m comment --comment "DROP_TCP PScan"iptables -A PSCAN -p udp -m limit --limit 10/second -j LOG --log-prefix "DROP_UDP Scan " -m comment --comment "DROP_UDP PScan"iptables -A PSCAN -p icmp -m limit --limit 10/second -j LOG --log-prefix "DROP_ICMP Scan " -m comment --comment "DROP_ICMP PScan"iptables -A PSCAN -f -m limit --limit 10/second -j LOG --log-prefix "DROP_FRAG Scan " -m comment --comment "DROP_FRAG PScan"@@ -55,7 +55,7 @@ iptables_init() { # that's not covered above, may just be a broken windows machine iptables -N NEWNOTSYN if [ "$DROPNEWNOTSYN" == "on" ]; then
iptables -A NEWNOTSYN -m limit --limit 10/minute -j LOG --log-prefix "DROP_NEWNOTSYN "
iptables -A NEWNOTSYN -m limit --limit 10/second -j LOG --log-prefix "DROP_NEWNOTSYN "-- 2.16.4