Updated: Enable correct display of ipv6 entries in Firewall log pages of web UI.
3 main changes: - Fill $iface and $out from PHYSIN and PHYSOUT when looking at bridged packets, otherwise fill from IN and OUT - Recognize ipv4 and ipv6 address style for $srcaddr and $dstaddr - Match color coding of tables to pie charts (see seperate patch sent earlier)
I am using the bridged ipv6 setup as proposed in the wiki. I do not think this breaks anything when not using ipv6. So it would be nice to include this even if ipv6 is not officially supported yet. It is quite useful when using the ipv6 setup.
This is an updated version to my previous email (as a full diff to master).
Signed-off-by: Michael Eitelwein michael@eitelwein.net --- diff --git a/html/cgi-bin/logs.cgi/firewalllog.dat b/html/cgi-bin/logs.cgi/firewalllog.dat index 5a584d6..df9b488 100644 --- a/html/cgi-bin/logs.cgi/firewalllog.dat +++ b/html/cgi-bin/logs.cgi/firewalllog.dat @@ -328,17 +328,23 @@ END $lines = 0; foreach $_ (@log) { - /^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses a bridge, PHYSIN= contains the relevant iface information + # otherwise use IN= + my $packet = ''; + if ($_ =~ /^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)(PHYSIN=.*)$/) { $packet = $5; } + elsif ($_ =~ /^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) { $packet = $4; } my $day = $1; $day =~ tr / /0/; my $time = $cgiparams{'DAY'} ? "$2" : "$day/$2" ; - my $comment = $3; - my $packet = $4; + my $chain = $3;
my ($iface, $srcaddr, $dstaddr, $macaddr, $proto, $srcport, $dstport); - $iface=$1 if $packet =~ /IN=(\w+)/; - $srcaddr=$1 if $packet =~ /SRC=([\d.]+)/; - $dstaddr=$1 if $packet =~ /DST=([\d.]+)/; + if ($packet =~ /PHYSIN=(\w+)/) { $iface=$1; } elsif ($packet =~ /IN=(\w+)/) { $iface = $1; } + # Identify whether ipv4 or ipv6. Both are mutally exclusive. + if ($packet =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) { $srcaddr=$1; } + if ($packet =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/) { $srcaddr=$1; } + if ($packet =~ /DST=(([\d]{1,3})(.([\d]{1,3})){3})/) { $dstaddr=$1; } + if ($packet =~ /DST=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/) { $dstaddr=$1; } $macaddr=$1 if $packet =~ /MAC=([\w+:]+)/; $proto=$1 if $packet =~ /PROTO=(\w+)/; $srcport=$1 if $packet =~ /SPT=(\d+)/; @@ -366,7 +372,7 @@ foreach $_ (@log) print <<END
<td align='center' $col>$time</td> - <td align='center' $col>$comment</td> + <td align='center' $col>$chain</td> <td align='center' $col>$iface</td> <td align='center' $col>$proto</td> <td align='center' $col><a href='/cgi-bin/ipinfo.cgi?ip=$srcaddr'>$srcaddr</a><br /><a href='/cgi-bin/ipinfo.cgi?ip=$dstaddr'>$dstaddr</a></td> diff --git a/html/cgi-bin/logs.cgi/firewalllogcountry.dat b/html/cgi-bin/logs.cgi/firewalllogcountry.dat index f998a62..087b844 100644 --- a/html/cgi-bin/logs.cgi/firewalllogcountry.dat +++ b/html/cgi-bin/logs.cgi/firewalllogcountry.dat @@ -261,7 +261,6 @@ if( $cgiparams{'pienumber'} != 0){$pienumber=$cgiparams{'pienumber'};} if( $cgiparams{'otherspie'} != 0){$otherspie=$cgiparams{'otherspie'};} if( $cgiparams{'showpie'} != 0){$showpie=$cgiparams{'showpie'};} if( $cgiparams{'sortcolumn'} != 0){$sortcolumn=$cgiparams{'sortcolumn'};} - print <<END </select> </td> @@ -294,15 +293,24 @@ $lines = 0;
foreach $_ (@log) { - /^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses bridge, use PHYSIN for iface, otherwise IN + if (/^... (..) (..:..:..) [\w-]+ kernel:(.*)(PHYSIN=.*)$/) {} + elsif (/^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) {} my $packet = $4; - $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";} - $packet =~ /SRC=([\d.]+)/; my $srcaddr=$1; + my $iface = ''; + if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($packet =~ /IN=(\w+)/) { $iface = $1; } + if ( $1 =~ /2./ ) { $iface=''; } + my $srcaddr = ''; + # Find ipv4 and ipv6 addresses + if ($packet =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) { $srcaddr = $1; } + elsif ($packet =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/) { $srcaddr = $1; }
if($iface eq $red_interface) { + # Traffic from red if($srcaddr ne '') { + # srcaddr is set my $ccode = $gi->country_code_by_name($srcaddr); - if( $ccode eq '') { + if ($ccode eq '') { $ccode = 'unknown'; } $tabjc{$ccode} = $tabjc{$ccode} + 1 ; @@ -311,11 +319,16 @@ foreach $_ (@log) } } else { + # Traffic not from red if($iface ne '') { $tabjc{$iface} = $tabjc{$iface} + 1 ; if(($tabjc{$iface} == 1) && ($lines < $pienumber)) { $lines = $lines + 1; } $linesjc++; } + else { + # What to do with empty iface lines? + # This probably is traffic from ipfire itself (IN= OUT=XY)? + } } }
@@ -423,7 +436,6 @@ if ($showpie != 2 && $pienumber <= 50 && $pienumber != 0) { print "<img src='/graphs/fwlog-country$imagerandom.png'>"; print "</div>"; } - print <<END <table width='100%' class='tbl'> <tr> @@ -448,10 +460,8 @@ for($s=0;$s<$lines;$s++) $percent = $value[$s] * 100 / $linesjc; $percent = sprintf("%.f", $percent); $total = $total + $value[$s]; - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; $color++; print "<tr>"; @@ -466,8 +476,11 @@ for($s=0;$s<$lines;$s++) print"<input type='hidden' name='country' value='$key[$s]'>"; print"<input type='submit' value='details'></form>"; } - - if($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq 'orange0') { + elsif ($key[$s] eq 'unknown') { + print "unknown"; + } + # Looks dangerous to use hardcoded interface names here. Probably needs fixing. + if ($key[$s] eq 'blue0' || $key[$s] eq 'green0' || $key[$s] eq 'orange0' ) { print "<td align='center' $col>$key[$s]</td>"; } else { @@ -489,10 +502,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){} else{ - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/firewalllogip.dat b/html/cgi-bin/logs.cgi/firewalllogip.dat index 7d82d20..6fc3422 100644 --- a/html/cgi-bin/logs.cgi/firewalllogip.dat +++ b/html/cgi-bin/logs.cgi/firewalllogip.dat @@ -291,7 +291,8 @@ if ($pienumber == -1 || $pienumber > $lines || $sortcolumn == 2) { $pienumber = $lines = 0; foreach $_ (@log) { - if($_ =~ /SRC=([\d.]+)/){ + # Extract ipv4 or ipv6 address + if (($_ =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($_ =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $tabjc{$1} = $tabjc{$1} + 1 ; if(($tabjc{$1} == 1) && ($lines < $pienumber)) { $lines = $lines + 1; } $linesjc++; @@ -428,10 +429,8 @@ for($s=0;$s<$lines;$s++) $percent = $value[$s] * 100 / $linesjc; $percent = sprintf("%.f", $percent); $total = $total + $value[$s]; - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; print "<tr>";
@@ -459,10 +458,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){} else{ - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/firewalllogport.dat b/html/cgi-bin/logs.cgi/firewalllogport.dat index 5b0db62..583c1b3 100644 --- a/html/cgi-bin/logs.cgi/firewalllogport.dat +++ b/html/cgi-bin/logs.cgi/firewalllogport.dat @@ -429,10 +429,8 @@ for($s=0;$s<$lines;$s++) $percent = $value[$s] * 100 / $linesjc; $percent = sprintf("%.f", $percent); $total = $total + $value[$s]; - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; print "<tr>";
@@ -446,10 +444,8 @@ for($s=0;$s<$lines;$s++)
if($cgiparams{'otherspie'} == 2 ){} else{ - my $colorIndex = $color % 10; - if($colorIndex == 0) { - $colorIndex = 10; - } + # colors are numbered 1 to 10 + my $colorIndex = ($color % 10) + 1; $col="bgcolor='$color{"color$colorIndex"}'"; print "<tr>";
diff --git a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat index 5283c42..27e7697 100644 --- a/html/cgi-bin/logs.cgi/showrequestfromcountry.dat +++ b/html/cgi-bin/logs.cgi/showrequestfromcountry.dat @@ -158,23 +158,35 @@ if (!$skip) { while (<FILE>) { - if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { - my $packet = $2; - $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";} - $packet =~ /SRC=([\d.]+)/; my $srcaddr=$1; + # First check whether valid log line (date, day) + if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { + # If ipv6 uses bridge, then use PHYSIN otherwise use IN + if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(PHYSIN=.*)$/) {} + elsif (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) {} + my $packet = $2; + my $iface = ''; + my $srcaddr = ''; + # If ipv6 uses bridge, use PHYSIN otherwise IN + if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($packet =~ /IN=(\w+)/) { $iface = $1; } + # Extract ipv4 and ipv6 addresses + if (($packet =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($packet =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { + $srcaddr = $1; + };
if($iface eq $country) { + # iface matches country code $log[$lines] = $_; $lines++; } elsif($srcaddr ne '') { + # or srcaddr matches country code my $ccode = $gi->country_code_by_name($srcaddr); - if($ccode eq $country){ + if($ccode eq uc($country)){ $log[$lines] = $_; $lines++; } } - } + } } close (FILE); } @@ -194,16 +206,28 @@ if ($multifile) { } if (!$skip) { while (<FILE>) { - if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { - if($_ =~ /SRC=([\d.]+)/){ - my $srcaddr=$1; - my $ccode = $gi->country_code_by_name($srcaddr); - if($ccode eq $country){ + # Check if valid log line (date, day) + if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { + my $iface = ''; + # If ipv6 uses bridge, then use PHYSIN otherwise IN + if ($_ =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($_ =~ /IN=(\w+)/) { $iface = $1; } + + if($iface eq $country) { + # iface matches country code + $log[$lines] = $_; + $lines++; + } + # extract ipv4 and ipv6 address + elsif (($_ =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($_ =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { + my $srcaddr=$1; + my $ccode = $gi->country_code_by_name($srcaddr); + if($ccode eq uc($country)){ + # or srcaddr matches country code $log[$lines] = $_; $lines++; + } } - } - } + } } close (FILE); } @@ -308,32 +332,45 @@ $lines = 0; foreach $_ (@slice) { $a = $_; - /^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses bridge, use PHYSIN otherwise use IN + if (/^... (..) (..:..:..) [\w-]+ kernel:(.*)(PHYSIN=.*)$/) {} + elsif (/^... (..) (..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) {}; my $packet = $4; - $packet =~ /IN=(\w+)/; my $iface=$1; if ( $1 =~ /2./ ){ $iface="";} - $packet =~ /SRC=([\d.]+)/; my $srcaddr=$1; + my $iface = ''; + # If ipv6 uses bridge, use PHYSIN otherwise use IN + if ($packet =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($packet =~ /IN=(\w+)/) { $iface = $1; } + if ( $1 =~ /2./ ){ $iface=""; } + my $srcaddr = ''; + # Extract ipv4 and ipv6 addresses + if (($packet =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($packet =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { + $srcaddr = $1; + };
if($iface eq $country || $srcaddr ne '') { - my $ccode; + my $ccode=''; if($iface ne $country) { $ccode = $gi->country_code_by_name($srcaddr); } - if($iface eq $country || $ccode eq $country) { - my $chain = ''; + if($iface eq $country || $ccode eq uc($country)) { + my $chain = ''; my $in = '-'; my $out = '-'; my $srcaddr = ''; my $dstaddr = ''; my $protostr = ''; my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses bridge, the use PHYSIN otherwise use IN + if ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)(PHYSIN=.*)$/) {} + elsif ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) {} my $timestamp = $1; my $chain = $2; my $packet = $3; $timestamp =~ /(...) (..) (..:..:..)/; my $month = $1; my $day = $2; my $time = $3;
- if ($a =~ /IN=(\w+)/) { $iface = $1; } - if ($a =~ /OUT=(\w+)/) { $out = $1; } - if ($a =~ /SRC=([\d.]+)/) { $srcaddr = $1; } - if ($a =~ /DST=([\d.]+)/) { $dstaddr = $1; } + # If ipv6 uses bridge, use PHYSIN and PHYSOUT, otherwise use IN and OUT + if ($a =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($a =~ /IN=(\w+)/) { $iface = $1; } + if ($a =~ /PHYSOUT=(\w+)/) { $out = $1; } elsif ($a =~ /OUT=(\w+)/) { $out = $1; } + # Extract ipv4 and ipv6 addresses + if (($a =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; } + if (($a =~ /DST=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /DST=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; } if ($a =~ /PROTO=(\w+)/) { $protostr = $1; } my $protostrlc = lc($protostr); if ($a =~ /SPT=([\d.]+)/){ $srcport = $1; } diff --git a/html/cgi-bin/logs.cgi/showrequestfromip.dat b/html/cgi-bin/logs.cgi/showrequestfromip.dat index 09a60b5..d7d1ace 100644 --- a/html/cgi-bin/logs.cgi/showrequestfromip.dat +++ b/html/cgi-bin/logs.cgi/showrequestfromip.dat @@ -155,7 +155,7 @@ if (!$skip) while (<FILE>) { if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { - if($_ =~ /SRC=([\d.]+)/){ + if (($_ =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($_ =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { if($1 eq $ip){ $log[$lines] = $_; $lines++; @@ -182,12 +182,12 @@ if ($multifile) { if (!$skip) { while (<FILE>) { if (/(^${monthstr} ${daystr} ..:..:..) [\w-]+ kernel:.*(IN=.*)$/) { - if($_ =~ /SRC=([\d.]+)/){ - if($1 eq $ip){ + if (($_ =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($_ =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { + if($1 eq $ip){ $log[$lines] = $_; $lines++; - } - } + } + } } } close (FILE); @@ -293,7 +293,8 @@ $lines = 0; foreach $_ (@slice) { $a = $_; - if($_ =~ /SRC=([\d.]+)/){ + # Check whether valid ipv4 or ipv6 address + if (($_ =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($_ =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { if($1 eq $ip){ my $chain = ''; my $in = '-'; my $out = '-'; @@ -301,15 +302,19 @@ foreach $_ (@slice) my $protostr = ''; my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses bridge, the use PHYSIN, otherwise use IN + if ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)(PHYSIN=.*)$/) {} + elsif ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) {} my $timestamp = $1; my $chain = $2; my $packet = $3; $timestamp =~ /(...) (..) (..:..:..)/; my $month = $1; my $day = $2; my $time = $3;
- if ($a =~ /IN=(\w+)/) { $iface = $1; } - if ($a =~ /OUT=(\w+)/) { $out = $1; } - if ($a =~ /SRC=([\d.]+)/) { $srcaddr = $1; } - if ($a =~ /DST=([\d.]+)/) { $dstaddr = $1; } + # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise use IN and OUT + if ($a =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($a =~ /IN=(\w+)/) { $iface = $1; } + if ($a =~ /PHYSOUT=(\w+)/) { $out = $1; } elsif ($a =~ /OUT=(\w+)/) { $out = $1; } + # Detect ipv4 and ipv6 addresses + if (($a =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; } + if (($a =~ /DST=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /DST=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; } if ($a =~ /PROTO=(\w+)/) { $protostr = $1; } my $protostrlc = lc($protostr); if ($a =~ /SPT=([\d.]+)/){ $srcport = $1; } diff --git a/html/cgi-bin/logs.cgi/showrequestfromport.dat b/html/cgi-bin/logs.cgi/showrequestfromport.dat index ad9823c..6f5f63b 100644 --- a/html/cgi-bin/logs.cgi/showrequestfromport.dat +++ b/html/cgi-bin/logs.cgi/showrequestfromport.dat @@ -307,15 +307,19 @@ foreach $_ (@slice) my $protostr = ''; my $srcport = ''; my $dstport = '';
- $_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/; + # If ipv6 uses bridge, the use PHYSIN, otherwise use IN + if ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)(PHYSIN=.*)$/) {} + elsif ($_ =~ /(^.* ..:..:..) [\w-]+ kernel:(.*)(IN=.*)$/) {} my $timestamp = $1; my $chain = $2; my $packet = $3; $timestamp =~ /(...) (..) (..:..:..)/; my $month = $1; my $day = $2; my $time = $3; my $iface;
- if ($a =~ /IN=(\w+)/) { $iface = $1; } - if ($a =~ /OUT=(\w+)/) { $out = $1; } - if ($a =~ /SRC=([\d.]+)/) { $srcaddr = $1; } - if ($a =~ /DST=([\d.]+)/) { $dstaddr = $1; } + # If ipv6 uses bridge, the use PHYSIN and PHYSOUT, otherwise use IN and OUT + if ($a =~ /PHYSIN=(\w+)/) { $iface = $1; } elsif ($a =~ /IN=(\w+)/) { $iface = $1; } + if ($a =~ /PHYSOUT=(\w+)/) { $out = $1; } elsif ($a =~ /OUT=(\w+)/) { $out = $1; } + # Detect ipv4 and ipv6 addresses + if (($a =~ /SRC=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /SRC=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $srcaddr = $1; } + if (($a =~ /DST=(([\d]{1,3})(.([\d]{1,3})){3})/) or ($a =~ /DST=(([0-9a-fA-F]{0,4})(:([0-9a-fA-F]{0,4})){2,7})/)) { $dstaddr = $1; } if ($a =~ /PROTO=(\w+)/) { $protostr = $1; } my $protostrlc = lc($protostr); if ($a =~ /SPT=([\d.]+)/){ $srcport = $1; }