Hello,
Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where specific 802.11ac settings can be added. Ex: vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42
Others specific settings might be needed - as listed in the hostapd configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
Currently these settings added to /etc/hostapd.conf don't survire when WUI is used - settings need to be added back afer WUI is used and hostapd restarted.
Thank you for considering this improvement, Horace
Hi,
On 28 Dec 2018, at 22:41, Horace Michael horace.michael@gmx.com wrote:
Hello,
Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where specific 802.11ac settings can be added. Ex: vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42
It is absolutely impossible to hardcode a specific channel.
Others specific settings might be needed - as listed in the hostapd configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
Currently these settings added to /etc/hostapd.conf don't survire when WUI is used - settings need to be added back afer WUI is used and hostapd restarted.
Thank you for considering this improvement, Horace
-Michael
Hi michael.tremer@ipfire.org wrote:
Hi,
On 28 Dec 2018, at 22:41, Horace Michael horace.michael@gmx.com
wrote:
Hello,
Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where
specific 802.11ac settings can be added.
Ex: vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42
It is absolutely impossible to hardcode a specific channel.
vht_oper_centr_freq_seg0_idx was a bad example - it is computed based on the channel...
Other than that the list of settings required by 802.11ac is quite long and currently there is no place to add them in WUI.
Others specific settings might be needed - as listed in the hostapd
configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
Currently these settings added to /etc/hostapd.conf don't survire
when WUI is used - settings need to be added back afer WUI is used and hostapd restarted.
Thank you for considering this improvement, Horace
-Michael
-- Horace Michael (aka H&M) Please excuse my typos and brevity. Sent from a Smartphone.
On 28 Dec 2018, at 22:49, Horace Michael horace.michael@gmx.com wrote:
Hi michael.tremer@ipfire.org wrote:
Hi,
On 28 Dec 2018, at 22:41, Horace Michael horace.michael@gmx.com
wrote:
Hello,
Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where
specific 802.11ac settings can be added.
Ex: vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42
It is absolutely impossible to hardcode a specific channel.
vht_oper_centr_freq_seg0_idx was a bad example - it is computed based on the channel...
Other than that the list of settings required by 802.11ac is quite long and currently there is no place to add them in WUI.
*What* other settings? 802.11ac runs fine as it is. You need to be clearer on what you want to achieve here.
-Michael
Others specific settings might be needed - as listed in the hostapd
configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
Currently these settings added to /etc/hostapd.conf don't survire
when WUI is used - settings need to be added back afer WUI is used and hostapd restarted.
Thank you for considering this improvement, Horace
-Michael
-- Horace Michael (aka H&M) Please excuse my typos and brevity. Sent from a Smartphone.
Horace,
Have you created a request in Bugzilla?
Tom
On Dec 28, 2018, at 5:42 PM, Horace Michael horace.michael@gmx.com wrote:
Hello,
Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where specific 802.11ac settings can be added. Ex: vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42
Others specific settings might be needed - as listed in the hostapd configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
Currently these settings added to /etc/hostapd.conf don't survire when WUI is used - settings need to be added back afer WUI is used and hostapd restarted.
Thank you for considering this improvement, Horace
-
Horace Michael -
Michael Tremer -
Tom Rymes