this u-boot should also work with NanoPi R1S H5
Signed-off-by: Arne Fitzenreiter arne_f@ipfire.org --- config/rootfiles/common/aarch64/u-boot | 2 ++ lfs/u-boot | 17 +++++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/config/rootfiles/common/aarch64/u-boot b/config/rootfiles/common/aarch64/u-boot index ab22769e3..2b60c7802 100644 --- a/config/rootfiles/common/aarch64/u-boot +++ b/config/rootfiles/common/aarch64/u-boot @@ -10,6 +10,8 @@ boot/uboot.env usr/share/u-boot/nanopi_r2s/u-boot-rockchip.bin #usr/share/u-boot/nanopi_r4s usr/share/u-boot/nanopi_r4s/u-boot-rockchip.bin +#usr/share/u-boot/orangepi_zero_plus +usr/share/u-boot/orangepi_zero_plus/u-boot-sunxi-with-spl.bin #usr/share/u-boot/rpi usr/share/u-boot/rpi/u-boot-rpi3.bin usr/share/u-boot/rpi/u-boot-rpi4.bin diff --git a/lfs/u-boot b/lfs/u-boot index b68cd6faf..2018a8a5f 100644 --- a/lfs/u-boot +++ b/lfs/u-boot @@ -186,8 +186,22 @@ else cd $(DIR_APP) && install u-boot.bin /boot/u-boot-rpi4.bin cd $(DIR_APP) && make distclean
+ # OrangePi Zero Plus + cd $(DIR_APP) && rm -rf arm-trusted-firmware-$(ATF_VER) + cd $(DIR_APP) && tar axf $(DIR_DL)/arm-trusted-firmware-$(ATF_VER).tar.gz + cd $(DIR_APP)/arm-trusted-firmware-$(ATF_VER) && make PLAT=sun50i_a64 DEBUG=0 bl31 + cd $(DIR_APP) && cp arm-trusted-firmware-$(ATF_VER)/build/sun50i_a64/release/bl31.bin bl31.bin + cd $(DIR_APP) && rm -rf arm-trusted-firmware-$(ATF_VER) + -mkdir -pv /usr/share/u-boot/orangepi_zero_plus + cd $(DIR_APP) && make CROSS_COMPILE="" orangepi_zero_plus_config + cd $(DIR_APP) && sed -i -e 's!^CONFIG_IDENT_STRING=.*!CONFIG_IDENT_STRING=" OrangePi Zero+ - IPFire.org"!' .config + cd $(DIR_APP) && make CROSS_COMPILE="" HOSTCC="gcc $(CFLAGS)" + cd $(DIR_APP) && install -v -m 644 u-boot-sunxi-with-spl.bin \ + /usr/share/u-boot/orangepi_zero_plus + cd $(DIR_APP) && make distclean + cd $(DIR_APP) && rm -f bl31.bin + # Nanopi R2S -# cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/u-boot/rockchip/generate-2-ethaddr.diff cd $(DIR_APP) && rm -rf arm-trusted-firmware-$(ATF_VER) cd $(DIR_APP) && tar axf $(DIR_DL)/arm-trusted-firmware-$(ATF_VER).tar.gz cd $(DIR_APP)/arm-trusted-firmware-$(ATF_VER) && make PLAT=rk3328 ARCH=aarch64 DEBUG=0 bl31 @@ -212,7 +226,6 @@ else cd $(DIR_APP) && sed -i -e 's!^CONFIG_IDENT_STRING=.*!CONFIG_IDENT_STRING=" Nanopi R4S - IPFire.org"!' .config cd $(DIR_APP) && sed -i -e 's!^CONFIG_BOOTCOMMAND=.*!CONFIG_BOOTCOMMAND="console=ttyS2,115200n8;run distro_bootcmd"!' .config cd $(DIR_APP) && sed -i -e 's!^CONFIG_BAUDRATE=.*!CONFIG_BAUDRATE=115200!' .config -# cd $(DIR_APP) && sed -i -e 's!.*CONFIG_MISC_INIT_R.*!CONFIG_MISC_INIT_R=y!' .config cd $(DIR_APP) && make CROSS_COMPILE="" HOSTCC="gcc $(CFLAGS)" cd $(DIR_APP) && install -v -m 644 u-boot-rockchip.bin \ /usr/share/u-boot/nanopi_r4s/u-boot-rockchip.bin
-
Arne Fitzenreiter