Hey,
I have been working on the update to Linux 3.3 in the last weeks. Unfortunately, I am running out if time in most things I do. So my request is, that some of you test the kernel that I already compiled.
Scratch build: https://pakfire.ipfire.org/build/a740cfc3-1996-442b-87d7-a3432a6561f7
I don't expect anything weird, but I have not been able to test if it boots up at all.
Make sure you check that the initrd has been generated after the installation, reboot and then run a couple of things. That's all.
The reason for this kind of hurry is, that the release of Linux 3.4 is imminent (probably this week) and I don't like to get stuck on a too old kernel.
Michael
Hello Michael,
I've downloaded your kernel and tested it on my x86_64 Virtual Machine.
The kernel boots smooth, also the bootsplash appears. All services started up probably also network will came up and I was able to connect to the machine via SSH.
[root@ipfire ~]# uname -r 3.3.6-1.ip3.x86_64
Stefan
Hey,
I have been working on the update to Linux 3.3 in the last weeks. Unfortunately, I am running out if time in most things I do. So my request is, that some of you test the kernel that I already compiled.
Scratch build: https://pakfire.ipfire.org/build/a740cfc3-1996-442b-87d7-a3432a6561f7
I don't expect anything weird, but I have not been able to test if it boots up at all.
Make sure you check that the initrd has been generated after the installation, reboot and then run a couple of things. That's all.
The reason for this kind of hurry is, that the release of Linux 3.4 is imminent (probably this week) and I don't like to get stuck on a too old kernel.
Michael
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Thanks for testing.
I managed to install the kernel on my hardware as well. It runs perfectly.
I will put all the changes together and commit them as soon as possible. Stay tuned for that.
Michael
On Wed, 2012-05-16 at 22:03 +0200, Stefan Schantl wrote:
Hello Michael,
I've downloaded your kernel and tested it on my x86_64 Virtual Machine.
The kernel boots smooth, also the bootsplash appears. All services started up probably also network will came up and I was able to connect to the machine via SSH.
[root@ipfire ~]# uname -r 3.3.6-1.ip3.x86_64
Stefan
Hey,
I have been working on the update to Linux 3.3 in the last weeks. Unfortunately, I am running out if time in most things I do. So my request is, that some of you test the kernel that I already compiled.
Scratch build: https://pakfire.ipfire.org/build/a740cfc3-1996-442b-87d7-a3432a6561f7
I don't expect anything weird, but I have not been able to test if it boots up at all.
Make sure you check that the initrd has been generated after the installation, reboot and then run a couple of things. That's all.
The reason for this kind of hurry is, that the release of Linux 3.4 is imminent (probably this week) and I don't like to get stuck on a too old kernel.
Michael
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
Development mailing list Development@lists.ipfire.org http://lists.ipfire.org/mailman/listinfo/development
-
Michael Tremer -
Stefan Schantl